summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/broadcom/b43legacy/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/broadcom/b43legacy/Kconfig')
-rw-r--r--drivers/net/wireless/broadcom/b43legacy/Kconfig105
1 files changed, 105 insertions, 0 deletions
diff --git a/drivers/net/wireless/broadcom/b43legacy/Kconfig b/drivers/net/wireless/broadcom/b43legacy/Kconfig
new file mode 100644
index 0000000..3463d2b
--- /dev/null
+++ b/drivers/net/wireless/broadcom/b43legacy/Kconfig
@@ -0,0 +1,105 @@
+config B43LEGACY
+ tristate "Broadcom 43xx-legacy wireless support (mac80211 stack)"
+ depends on m
+ depends on SSB_POSSIBLE && MAC80211 && HAS_DMA
+ select SSB
+ depends on FW_LOADER
+ ---help---
+ b43legacy is a driver for 802.11b devices from Broadcom (BCM4301 and
+ BCM4303) and early model 802.11g chips (BCM4306 Ver. 2) used in the
+ Linksys WPC54G V1 PCMCIA devices.
+
+ Newer 802.11g and 802.11a devices need b43.
+
+ It is safe to include both b43 and b43legacy as the underlying glue
+ layer will automatically load the correct version for your device.
+
+ This driver uses V3 firmware, which must be installed separately using
+ b43-fwcutter.
+
+ This driver can be built as a module (recommended) that will be
+ called "b43legacy". If unsure, say M.
+
+# Auto-select SSB PCI-HOST support, if possible
+config B43LEGACY_PCI_AUTOSELECT
+ bool
+ depends on B43LEGACY && SSB_PCIHOST_POSSIBLE
+ select SSB_PCIHOST
+ select SSB_B43_PCI_BRIDGE
+ default y
+
+# Auto-select SSB PCICORE driver, if possible
+config B43LEGACY_PCICORE_AUTOSELECT
+ bool
+ depends on B43LEGACY && SSB_DRIVER_PCICORE_POSSIBLE
+ select SSB_DRIVER_PCICORE
+ default y
+
+# LED support
+# This config option automatically enables b43legacy LEDS support,
+# if it's possible.
+config B43LEGACY_LEDS
+ bool
+ depends on B43LEGACY && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = B43LEGACY)
+ default y
+
+# This config option automatically enables b43 HW-RNG support,
+# if the HW-RNG core is enabled.
+config B43LEGACY_HWRNG
+ bool
+ depends on B43LEGACY && (HW_RANDOM = y || HW_RANDOM = B43LEGACY)
+ default y
+
+config B43LEGACY_DEBUG
+ bool "Broadcom 43xx-legacy debugging"
+ depends on B43LEGACY
+ default y
+ ---help---
+ Say Y, because this information will help you get the driver running.
+ This option generates a minimum of log output.
+
+config B43LEGACY_DMA
+ bool
+ depends on B43LEGACY
+
+config B43LEGACY_PIO
+ bool
+ depends on B43LEGACY
+
+choice
+ prompt "Broadcom 43xx-legacy data transfer mode"
+ depends on B43LEGACY
+ default B43LEGACY_DMA_AND_PIO_MODE
+
+config B43LEGACY_DMA_AND_PIO_MODE
+ bool "DMA + PIO"
+ select B43LEGACY_DMA
+ select B43LEGACY_PIO
+ ---help---
+ Include both, Direct Memory Access (DMA) and Programmed I/O (PIO)
+ data transfer modes. The mode actually used is selectable through
+ the module parameter "pio". With pio=0 as a module parameter, the
+ default DMA is used, otherwise PIO is used.
+
+ If unsure, choose this option.
+
+config B43LEGACY_DMA_MODE
+ bool "DMA (Direct Memory Access) only"
+ select B43LEGACY_DMA
+ ---help---
+ Only include Direct Memory Access (DMA).
+ This reduces the size of the driver module, by omitting the PIO code.
+
+config B43LEGACY_PIO_MODE
+ bool "PIO (Programmed I/O) only"
+ select B43LEGACY_PIO
+ ---help---
+ Only include Programmed I/O (PIO).
+ This reduces the size of the driver module, by omitting the DMA code.
+ Please note that PIO transfers are slow (compared to DMA).
+
+ Also note that not all devices of the b43legacy series support PIO.
+
+ You should use PIO only if DMA does not work for you.
+
+endchoice