diff options
Diffstat (limited to 'drivers/net/wireless/intel/iwlwifi/fw/api/debug.h')
| -rw-r--r-- | drivers/net/wireless/intel/iwlwifi/fw/api/debug.h | 345 |
1 files changed, 345 insertions, 0 deletions
diff --git a/drivers/net/wireless/intel/iwlwifi/fw/api/debug.h b/drivers/net/wireless/intel/iwlwifi/fw/api/debug.h new file mode 100644 index 0000000..9f88b61 --- /dev/null +++ b/drivers/net/wireless/intel/iwlwifi/fw/api/debug.h @@ -0,0 +1,345 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved. + * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH + * Copyright(c) 2016 - 2017 Intel Deutschland GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * The full GNU General Public License is included in this distribution + * in the file called COPYING. + * + * Contact Information: + * Intel Linux Wireless <linuxwifi@intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. + * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH + * Copyright(c) 2016 - 2017 Intel Deutschland GmbH + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ +#ifndef __iwl_fw_api_debug_h__ +#define __iwl_fw_api_debug_h__ + +/** + * enum iwl_debug_cmds - debug commands + */ +enum iwl_debug_cmds { + /** + * @LMAC_RD_WR: + * LMAC memory read/write, using &struct iwl_dbg_mem_access_cmd and + * &struct iwl_dbg_mem_access_rsp + */ + LMAC_RD_WR = 0x0, + /** + * @UMAC_RD_WR: + * UMAC memory read/write, using &struct iwl_dbg_mem_access_cmd and + * &struct iwl_dbg_mem_access_rsp + */ + UMAC_RD_WR = 0x1, + /** + * @MFU_ASSERT_DUMP_NTF: + * &struct iwl_mfu_assert_dump_notif + */ + MFU_ASSERT_DUMP_NTF = 0xFE, +}; + +/* Error response/notification */ +enum { + FW_ERR_UNKNOWN_CMD = 0x0, + FW_ERR_INVALID_CMD_PARAM = 0x1, + FW_ERR_SERVICE = 0x2, + FW_ERR_ARC_MEMORY = 0x3, + FW_ERR_ARC_CODE = 0x4, + FW_ERR_WATCH_DOG = 0x5, + FW_ERR_WEP_GRP_KEY_INDX = 0x10, + FW_ERR_WEP_KEY_SIZE = 0x11, + FW_ERR_OBSOLETE_FUNC = 0x12, + FW_ERR_UNEXPECTED = 0xFE, + FW_ERR_FATAL = 0xFF +}; + +/** + * struct iwl_error_resp - FW error indication + * ( REPLY_ERROR = 0x2 ) + * @error_type: one of FW_ERR_* + * @cmd_id: the command ID for which the error occurred + * @reserved1: reserved + * @bad_cmd_seq_num: sequence number of the erroneous command + * @error_service: which service created the error, applicable only if + * error_type = 2, otherwise 0 + * @timestamp: TSF in usecs. + */ +struct iwl_error_resp { + __le32 error_type; + u8 cmd_id; + u8 reserved1; + __le16 bad_cmd_seq_num; + __le32 error_service; + __le64 timestamp; +} __packed; + +#define TX_FIFO_MAX_NUM_9000 8 +#define TX_FIFO_MAX_NUM 15 +#define RX_FIFO_MAX_NUM 2 +#define TX_FIFO_INTERNAL_MAX_NUM 6 + +/** + * struct iwl_shared_mem_cfg_v2 - Shared memory configuration information + * + * @shared_mem_addr: shared memory addr (pre 8000 HW set to 0x0 as MARBH is not + * accessible) + * @shared_mem_size: shared memory size + * @sample_buff_addr: internal sample (mon/adc) buff addr (pre 8000 HW set to + * 0x0 as accessible only via DBGM RDAT) + * @sample_buff_size: internal sample buff size + * @txfifo_addr: start addr of TXF0 (excluding the context table 0.5KB), (pre + * 8000 HW set to 0x0 as not accessible) + * @txfifo_size: size of TXF0 ... TXF7 + * @rxfifo_size: RXF1, RXF2 sizes. If there is no RXF2, it'll have a value of 0 + * @page_buff_addr: used by UMAC and performance debug (page miss analysis), + * when paging is not supported this should be 0 + * @page_buff_size: size of %page_buff_addr + * @rxfifo_addr: Start address of rxFifo + * @internal_txfifo_addr: start address of internalFifo + * @internal_txfifo_size: internal fifos' size + * + * NOTE: on firmware that don't have IWL_UCODE_TLV_CAPA_EXTEND_SHARED_MEM_CFG + * set, the last 3 members don't exist. + */ +struct iwl_shared_mem_cfg_v2 { + __le32 shared_mem_addr; + __le32 shared_mem_size; + __le32 sample_buff_addr; + __le32 sample_buff_size; + __le32 txfifo_addr; + __le32 txfifo_size[TX_FIFO_MAX_NUM_9000]; + __le32 rxfifo_size[RX_FIFO_MAX_NUM]; + __le32 page_buff_addr; + __le32 page_buff_size; + __le32 rxfifo_addr; + __le32 internal_txfifo_addr; + __le32 internal_txfifo_size[TX_FIFO_INTERNAL_MAX_NUM]; +} __packed; /* SHARED_MEM_ALLOC_API_S_VER_2 */ + +/** + * struct iwl_shared_mem_lmac_cfg - LMAC shared memory configuration + * + * @txfifo_addr: start addr of TXF0 (excluding the context table 0.5KB) + * @txfifo_size: size of TX FIFOs + * @rxfifo1_addr: RXF1 addr + * @rxfifo1_size: RXF1 size + */ +struct iwl_shared_mem_lmac_cfg { + __le32 txfifo_addr; + __le32 txfifo_size[TX_FIFO_MAX_NUM]; + __le32 rxfifo1_addr; + __le32 rxfifo1_size; + +} __packed; /* SHARED_MEM_ALLOC_LMAC_API_S_VER_1 */ + +/** + * struct iwl_shared_mem_cfg - Shared memory configuration information + * + * @shared_mem_addr: shared memory address + * @shared_mem_size: shared memory size + * @sample_buff_addr: internal sample (mon/adc) buff addr + * @sample_buff_size: internal sample buff size + * @rxfifo2_addr: start addr of RXF2 + * @rxfifo2_size: size of RXF2 + * @page_buff_addr: used by UMAC and performance debug (page miss analysis), + * when paging is not supported this should be 0 + * @page_buff_size: size of %page_buff_addr + * @lmac_num: number of LMACs (1 or 2) + * @lmac_smem: per - LMAC smem data + */ +struct iwl_shared_mem_cfg { + __le32 shared_mem_addr; + __le32 shared_mem_size; + __le32 sample_buff_addr; + __le32 sample_buff_size; + __le32 rxfifo2_addr; + __le32 rxfifo2_size; + __le32 page_buff_addr; + __le32 page_buff_size; + __le32 lmac_num; + struct iwl_shared_mem_lmac_cfg lmac_smem[2]; +} __packed; /* SHARED_MEM_ALLOC_API_S_VER_3 */ + +/** + * struct iwl_mfuart_load_notif - mfuart image version & status + * ( MFUART_LOAD_NOTIFICATION = 0xb1 ) + * @installed_ver: installed image version + * @external_ver: external image version + * @status: MFUART loading status + * @duration: MFUART loading time + * @image_size: MFUART image size in bytes +*/ +struct iwl_mfuart_load_notif { + __le32 installed_ver; + __le32 external_ver; + __le32 status; + __le32 duration; + /* image size valid only in v2 of the command */ + __le32 image_size; +} __packed; /* MFU_LOADER_NTFY_API_S_VER_2 */ + +/** + * struct iwl_mfu_assert_dump_notif - mfuart dump logs + * ( MFU_ASSERT_DUMP_NTF = 0xfe ) + * @assert_id: mfuart assert id that cause the notif + * @curr_reset_num: number of asserts since uptime + * @index_num: current chunk id + * @parts_num: total number of chunks + * @data_size: number of data bytes sent + * @data: data buffer + */ +struct iwl_mfu_assert_dump_notif { + __le32 assert_id; + __le32 curr_reset_num; + __le16 index_num; + __le16 parts_num; + __le32 data_size; + __le32 data[0]; +} __packed; /* MFU_DUMP_ASSERT_API_S_VER_1 */ + +/** + * enum iwl_mvm_marker_id - marker ids + * + * The ids for different type of markers to insert into the usniffer logs + * + * @MARKER_ID_TX_FRAME_LATENCY: TX latency marker + */ +enum iwl_mvm_marker_id { + MARKER_ID_TX_FRAME_LATENCY = 1, +}; /* MARKER_ID_API_E_VER_1 */ + +/** + * struct iwl_mvm_marker - mark info into the usniffer logs + * + * (MARKER_CMD = 0xcb) + * + * Mark the UTC time stamp into the usniffer logs together with additional + * metadata, so the usniffer output can be parsed. + * In the command response the ucode will return the GP2 time. + * + * @dw_len: The amount of dwords following this byte including this byte. + * @marker_id: A unique marker id (iwl_mvm_marker_id). + * @reserved: reserved. + * @timestamp: in milliseconds since 1970-01-01 00:00:00 UTC + * @metadata: additional meta data that will be written to the unsiffer log + */ +struct iwl_mvm_marker { + u8 dw_len; + u8 marker_id; + __le16 reserved; + __le64 timestamp; + __le32 metadata[0]; +} __packed; /* MARKER_API_S_VER_1 */ + +/* Operation types for the debug mem access */ +enum { + DEBUG_MEM_OP_READ = 0, + DEBUG_MEM_OP_WRITE = 1, + DEBUG_MEM_OP_WRITE_BYTES = 2, +}; + +#define DEBUG_MEM_MAX_SIZE_DWORDS 32 + +/** + * struct iwl_dbg_mem_access_cmd - Request the device to read/write memory + * @op: DEBUG_MEM_OP_* + * @addr: address to read/write from/to + * @len: in dwords, to read/write + * @data: for write opeations, contains the source buffer + */ +struct iwl_dbg_mem_access_cmd { + __le32 op; + __le32 addr; + __le32 len; + __le32 data[]; +} __packed; /* DEBUG_(U|L)MAC_RD_WR_CMD_API_S_VER_1 */ + +/* Status responses for the debug mem access */ +enum { + DEBUG_MEM_STATUS_SUCCESS = 0x0, + DEBUG_MEM_STATUS_FAILED = 0x1, + DEBUG_MEM_STATUS_LOCKED = 0x2, + DEBUG_MEM_STATUS_HIDDEN = 0x3, + DEBUG_MEM_STATUS_LENGTH = 0x4, +}; + +/** + * struct iwl_dbg_mem_access_rsp - Response to debug mem commands + * @status: DEBUG_MEM_STATUS_* + * @len: read dwords (0 for write operations) + * @data: contains the read DWs + */ +struct iwl_dbg_mem_access_rsp { + __le32 status; + __le32 len; + __le32 data[]; +} __packed; /* DEBUG_(U|L)MAC_RD_WR_RSP_API_S_VER_1 */ + +#define CONT_REC_COMMAND_SIZE 80 +#define ENABLE_CONT_RECORDING 0x15 +#define DISABLE_CONT_RECORDING 0x16 + +/* + * struct iwl_continuous_record_mode - recording mode + */ +struct iwl_continuous_record_mode { + __le16 enable_recording; +} __packed; + +/* + * struct iwl_continuous_record_cmd - enable/disable continuous recording + */ +struct iwl_continuous_record_cmd { + struct iwl_continuous_record_mode record_mode; + u8 pad[CONT_REC_COMMAND_SIZE - + sizeof(struct iwl_continuous_record_mode)]; +} __packed; + +#endif /* __iwl_fw_api_debug_h__ */ |