diff options
Diffstat (limited to 'drivers/net/wireless/rsi/rsi_91x_sdio.c')
| -rw-r--r-- | drivers/net/wireless/rsi/rsi_91x_sdio.c | 851 |
1 files changed, 851 insertions, 0 deletions
diff --git a/drivers/net/wireless/rsi/rsi_91x_sdio.c b/drivers/net/wireless/rsi/rsi_91x_sdio.c new file mode 100644 index 0000000..be2a753 --- /dev/null +++ b/drivers/net/wireless/rsi/rsi_91x_sdio.c @@ -0,0 +1,851 @@ +/** + * Copyright (c) 2014 Redpine Signals Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include <linux/module.h> +#include "rsi_sdio.h" +#include "rsi_common.h" + +/** + * rsi_sdio_set_cmd52_arg() - This function prepares cmd 52 read/write arg. + * @rw: Read/write + * @func: function number + * @raw: indicates whether to perform read after write + * @address: address to which to read/write + * @writedata: data to write + * + * Return: argument + */ +static u32 rsi_sdio_set_cmd52_arg(bool rw, + u8 func, + u8 raw, + u32 address, + u8 writedata) +{ + return ((rw & 1) << 31) | ((func & 0x7) << 28) | + ((raw & 1) << 27) | (1 << 26) | + ((address & 0x1FFFF) << 9) | (1 << 8) | + (writedata & 0xFF); +} + +/** + * rsi_cmd52writebyte() - This function issues cmd52 byte write onto the card. + * @card: Pointer to the mmc_card. + * @address: Address to write. + * @byte: Data to write. + * + * Return: Write status. + */ +static int rsi_cmd52writebyte(struct mmc_card *card, + u32 address, + u8 byte) +{ + struct mmc_command io_cmd; + u32 arg; + + memset(&io_cmd, 0, sizeof(io_cmd)); + arg = rsi_sdio_set_cmd52_arg(1, 0, 0, address, byte); + io_cmd.opcode = SD_IO_RW_DIRECT; + io_cmd.arg = arg; + io_cmd.flags = MMC_RSP_R5 | MMC_CMD_AC; + + return mmc_wait_for_cmd(card->host, &io_cmd, 0); +} + +/** + * rsi_cmd52readbyte() - This function issues cmd52 byte read onto the card. + * @card: Pointer to the mmc_card. + * @address: Address to read from. + * @byte: Variable to store read value. + * + * Return: Read status. + */ +static int rsi_cmd52readbyte(struct mmc_card *card, + u32 address, + u8 *byte) +{ + struct mmc_command io_cmd; + u32 arg; + int err; + + memset(&io_cmd, 0, sizeof(io_cmd)); + arg = rsi_sdio_set_cmd52_arg(0, 0, 0, address, 0); + io_cmd.opcode = SD_IO_RW_DIRECT; + io_cmd.arg = arg; + io_cmd.flags = MMC_RSP_R5 | MMC_CMD_AC; + + err = mmc_wait_for_cmd(card->host, &io_cmd, 0); + if ((!err) && (byte)) + *byte = io_cmd.resp[0] & 0xFF; + return err; +} + +/** + * rsi_issue_sdiocommand() - This function issues sdio commands. + * @func: Pointer to the sdio_func structure. + * @opcode: Opcode value. + * @arg: Arguments to pass. + * @flags: Flags which are set. + * @resp: Pointer to store response. + * + * Return: err: command status as 0 or -1. + */ +static int rsi_issue_sdiocommand(struct sdio_func *func, + u32 opcode, + u32 arg, + u32 flags, + u32 *resp) +{ + struct mmc_command cmd; + struct mmc_host *host; + int err; + + host = func->card->host; + + memset(&cmd, 0, sizeof(struct mmc_command)); + cmd.opcode = opcode; + cmd.arg = arg; + cmd.flags = flags; + err = mmc_wait_for_cmd(host, &cmd, 3); + + if ((!err) && (resp)) + *resp = cmd.resp[0]; + + return err; +} + +/** + * rsi_handle_interrupt() - This function is called upon the occurence + * of an interrupt. + * @function: Pointer to the sdio_func structure. + * + * Return: None. + */ +static void rsi_handle_interrupt(struct sdio_func *function) +{ + struct rsi_hw *adapter = sdio_get_drvdata(function); + + sdio_release_host(function); + rsi_interrupt_handler(adapter); + sdio_claim_host(function); +} + +/** + * rsi_reset_card() - This function resets and re-initializes the card. + * @pfunction: Pointer to the sdio_func structure. + * + * Return: None. + */ +static void rsi_reset_card(struct sdio_func *pfunction) +{ + int ret = 0; + int err; + struct mmc_card *card = pfunction->card; + struct mmc_host *host = card->host; + s32 bit = (fls(host->ocr_avail) - 1); + u8 cmd52_resp; + u32 clock, resp, i; + u16 rca; + + /* Reset 9110 chip */ + ret = rsi_cmd52writebyte(pfunction->card, + SDIO_CCCR_ABORT, + (1 << 3)); + + /* Card will not send any response as it is getting reset immediately + * Hence expect a timeout status from host controller + */ + if (ret != -ETIMEDOUT) + rsi_dbg(ERR_ZONE, "%s: Reset failed : %d\n", __func__, ret); + + /* Wait for few milli seconds to get rid of residue charges if any */ + msleep(20); + + /* Initialize the SDIO card */ + host->ios.vdd = bit; + host->ios.chip_select = MMC_CS_DONTCARE; + host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN; + host->ios.power_mode = MMC_POWER_UP; + host->ios.bus_width = MMC_BUS_WIDTH_1; + host->ios.timing = MMC_TIMING_LEGACY; + host->ops->set_ios(host, &host->ios); + + /* + * This delay should be sufficient to allow the power supply + * to reach the minimum voltage. + */ + msleep(20); + + host->ios.clock = host->f_min; + host->ios.power_mode = MMC_POWER_ON; + host->ops->set_ios(host, &host->ios); + + /* + * This delay must be at least 74 clock sizes, or 1 ms, or the + * time required to reach a stable voltage. + */ + msleep(20); + + /* Issue CMD0. Goto idle state */ + host->ios.chip_select = MMC_CS_HIGH; + host->ops->set_ios(host, &host->ios); + msleep(20); + err = rsi_issue_sdiocommand(pfunction, + MMC_GO_IDLE_STATE, + 0, + (MMC_RSP_NONE | MMC_CMD_BC), + NULL); + host->ios.chip_select = MMC_CS_DONTCARE; + host->ops->set_ios(host, &host->ios); + msleep(20); + host->use_spi_crc = 0; + + if (err) + rsi_dbg(ERR_ZONE, "%s: CMD0 failed : %d\n", __func__, err); + + if (!host->ocr_avail) { + /* Issue CMD5, arg = 0 */ + err = rsi_issue_sdiocommand(pfunction, + SD_IO_SEND_OP_COND, + 0, + (MMC_RSP_R4 | MMC_CMD_BCR), + &resp); + if (err) + rsi_dbg(ERR_ZONE, "%s: CMD5 failed : %d\n", + __func__, err); + host->ocr_avail = resp; + } + + /* Issue CMD5, arg = ocr. Wait till card is ready */ + for (i = 0; i < 100; i++) { + err = rsi_issue_sdiocommand(pfunction, + SD_IO_SEND_OP_COND, + host->ocr_avail, + (MMC_RSP_R4 | MMC_CMD_BCR), + &resp); + if (err) { + rsi_dbg(ERR_ZONE, "%s: CMD5 failed : %d\n", + __func__, err); + break; + } + + if (resp & MMC_CARD_BUSY) + break; + msleep(20); + } + + if ((i == 100) || (err)) { + rsi_dbg(ERR_ZONE, "%s: card in not ready : %d %d\n", + __func__, i, err); + return; + } + + /* Issue CMD3, get RCA */ + err = rsi_issue_sdiocommand(pfunction, + SD_SEND_RELATIVE_ADDR, + 0, + (MMC_RSP_R6 | MMC_CMD_BCR), + &resp); + if (err) { + rsi_dbg(ERR_ZONE, "%s: CMD3 failed : %d\n", __func__, err); + return; + } + rca = resp >> 16; + host->ios.bus_mode = MMC_BUSMODE_PUSHPULL; + host->ops->set_ios(host, &host->ios); + + /* Issue CMD7, select card */ + err = rsi_issue_sdiocommand(pfunction, + MMC_SELECT_CARD, + (rca << 16), + (MMC_RSP_R1 | MMC_CMD_AC), + NULL); + if (err) { + rsi_dbg(ERR_ZONE, "%s: CMD7 failed : %d\n", __func__, err); + return; + } + + /* Enable high speed */ + if (card->host->caps & MMC_CAP_SD_HIGHSPEED) { + rsi_dbg(ERR_ZONE, "%s: Set high speed mode\n", __func__); + err = rsi_cmd52readbyte(card, SDIO_CCCR_SPEED, &cmd52_resp); + if (err) { + rsi_dbg(ERR_ZONE, "%s: CCCR speed reg read failed: %d\n", + __func__, err); + } else { + err = rsi_cmd52writebyte(card, + SDIO_CCCR_SPEED, + (cmd52_resp | SDIO_SPEED_EHS)); + if (err) { + rsi_dbg(ERR_ZONE, + "%s: CCR speed regwrite failed %d\n", + __func__, err); + return; + } + host->ios.timing = MMC_TIMING_SD_HS; + host->ops->set_ios(host, &host->ios); + } + } + + /* Set clock */ + if (mmc_card_hs(card)) + clock = 50000000; + else + clock = card->cis.max_dtr; + + if (clock > host->f_max) + clock = host->f_max; + + host->ios.clock = clock; + host->ops->set_ios(host, &host->ios); + + if (card->host->caps & MMC_CAP_4_BIT_DATA) { + /* CMD52: Set bus width & disable card detect resistor */ + err = rsi_cmd52writebyte(card, + SDIO_CCCR_IF, + (SDIO_BUS_CD_DISABLE | + SDIO_BUS_WIDTH_4BIT)); + if (err) { + rsi_dbg(ERR_ZONE, "%s: Set bus mode failed : %d\n", + __func__, err); + return; + } + host->ios.bus_width = MMC_BUS_WIDTH_4; + host->ops->set_ios(host, &host->ios); + } +} + +/** + * rsi_setclock() - This function sets the clock frequency. + * @adapter: Pointer to the adapter structure. + * @freq: Clock frequency. + * + * Return: None. + */ +static void rsi_setclock(struct rsi_hw *adapter, u32 freq) +{ + struct rsi_91x_sdiodev *dev = + (struct rsi_91x_sdiodev *)adapter->rsi_dev; + struct mmc_host *host = dev->pfunction->card->host; + u32 clock; + + clock = freq * 1000; + if (clock > host->f_max) + clock = host->f_max; + host->ios.clock = clock; + host->ops->set_ios(host, &host->ios); +} + +/** + * rsi_setblocklength() - This function sets the host block length. + * @adapter: Pointer to the adapter structure. + * @length: Block length to be set. + * + * Return: status: 0 on success, -1 on failure. + */ +static int rsi_setblocklength(struct rsi_hw *adapter, u32 length) +{ + struct rsi_91x_sdiodev *dev = + (struct rsi_91x_sdiodev *)adapter->rsi_dev; + int status; + rsi_dbg(INIT_ZONE, "%s: Setting the block length\n", __func__); + + status = sdio_set_block_size(dev->pfunction, length); + dev->pfunction->max_blksize = 256; + + rsi_dbg(INFO_ZONE, + "%s: Operational blk length is %d\n", __func__, length); + return status; +} + +/** + * rsi_setupcard() - This function queries and sets the card's features. + * @adapter: Pointer to the adapter structure. + * + * Return: status: 0 on success, -1 on failure. + */ +static int rsi_setupcard(struct rsi_hw *adapter) +{ + struct rsi_91x_sdiodev *dev = + (struct rsi_91x_sdiodev *)adapter->rsi_dev; + int status = 0; + + rsi_setclock(adapter, 50000); + + dev->tx_blk_size = 256; + status = rsi_setblocklength(adapter, dev->tx_blk_size); + if (status) + rsi_dbg(ERR_ZONE, + "%s: Unable to set block length\n", __func__); + return status; +} + +/** + * rsi_sdio_read_register() - This function reads one byte of information + * from a register. + * @adapter: Pointer to the adapter structure. + * @addr: Address of the register. + * @data: Pointer to the data that stores the data read. + * + * Return: 0 on success, -1 on failure. + */ +int rsi_sdio_read_register(struct rsi_hw *adapter, + u32 addr, + u8 *data) +{ + struct rsi_91x_sdiodev *dev = + (struct rsi_91x_sdiodev *)adapter->rsi_dev; + u8 fun_num = 0; + int status; + + sdio_claim_host(dev->pfunction); + + if (fun_num == 0) + *data = sdio_f0_readb(dev->pfunction, addr, &status); + else + *data = sdio_readb(dev->pfunction, addr, &status); + + sdio_release_host(dev->pfunction); + + return status; +} + +/** + * rsi_sdio_write_register() - This function writes one byte of information + * into a register. + * @adapter: Pointer to the adapter structure. + * @function: Function Number. + * @addr: Address of the register. + * @data: Pointer to the data tha has to be written. + * + * Return: 0 on success, -1 on failure. + */ +int rsi_sdio_write_register(struct rsi_hw *adapter, + u8 function, + u32 addr, + u8 *data) +{ + struct rsi_91x_sdiodev *dev = + (struct rsi_91x_sdiodev *)adapter->rsi_dev; + int status = 0; + + sdio_claim_host(dev->pfunction); + + if (function == 0) + sdio_f0_writeb(dev->pfunction, *data, addr, &status); + else + sdio_writeb(dev->pfunction, *data, addr, &status); + + sdio_release_host(dev->pfunction); + + return status; +} + +/** + * rsi_sdio_ack_intr() - This function acks the interrupt received. + * @adapter: Pointer to the adapter structure. + * @int_bit: Interrupt bit to write into register. + * + * Return: None. + */ +void rsi_sdio_ack_intr(struct rsi_hw *adapter, u8 int_bit) +{ + int status; + status = rsi_sdio_write_register(adapter, + 1, + (SDIO_FUN1_INTR_CLR_REG | + RSI_SD_REQUEST_MASTER), + &int_bit); + if (status) + rsi_dbg(ERR_ZONE, "%s: unable to send ack\n", __func__); +} + + + +/** + * rsi_sdio_read_register_multiple() - This function read multiple bytes of + * information from the SD card. + * @adapter: Pointer to the adapter structure. + * @addr: Address of the register. + * @count: Number of multiple bytes to be read. + * @data: Pointer to the read data. + * + * Return: 0 on success, -1 on failure. + */ +static int rsi_sdio_read_register_multiple(struct rsi_hw *adapter, + u32 addr, + u32 count, + u8 *data) +{ + struct rsi_91x_sdiodev *dev = + (struct rsi_91x_sdiodev *)adapter->rsi_dev; + u32 status; + + sdio_claim_host(dev->pfunction); + + status = sdio_readsb(dev->pfunction, data, addr, count); + + sdio_release_host(dev->pfunction); + + if (status != 0) + rsi_dbg(ERR_ZONE, "%s: Synch Cmd53 read failed\n", __func__); + return status; +} + +/** + * rsi_sdio_write_register_multiple() - This function writes multiple bytes of + * information to the SD card. + * @adapter: Pointer to the adapter structure. + * @addr: Address of the register. + * @data: Pointer to the data that has to be written. + * @count: Number of multiple bytes to be written. + * + * Return: 0 on success, -1 on failure. + */ +int rsi_sdio_write_register_multiple(struct rsi_hw *adapter, + u32 addr, + u8 *data, + u32 count) +{ + struct rsi_91x_sdiodev *dev = + (struct rsi_91x_sdiodev *)adapter->rsi_dev; + int status; + + if (dev->write_fail > 1) { + rsi_dbg(ERR_ZONE, "%s: Stopping card writes\n", __func__); + return 0; + } else if (dev->write_fail == 1) { + /** + * Assuming it is a CRC failure, we want to allow another + * card write + */ + rsi_dbg(ERR_ZONE, "%s: Continue card writes\n", __func__); + dev->write_fail++; + } + + sdio_claim_host(dev->pfunction); + + status = sdio_writesb(dev->pfunction, addr, data, count); + + sdio_release_host(dev->pfunction); + + if (status) { + rsi_dbg(ERR_ZONE, "%s: Synch Cmd53 write failed %d\n", + __func__, status); + dev->write_fail = 2; + } else { + memcpy(dev->prev_desc, data, FRAME_DESC_SZ); + } + return status; +} + +/** + * rsi_sdio_host_intf_write_pkt() - This function writes the packet to device. + * @adapter: Pointer to the adapter structure. + * @pkt: Pointer to the data to be written on to the device. + * @len: length of the data to be written on to the device. + * + * Return: 0 on success, -1 on failure. + */ +static int rsi_sdio_host_intf_write_pkt(struct rsi_hw *adapter, + u8 *pkt, + u32 len) +{ + struct rsi_91x_sdiodev *dev = + (struct rsi_91x_sdiodev *)adapter->rsi_dev; + u32 block_size = dev->tx_blk_size; + u32 num_blocks, address, length; + u32 queueno; + int status; + + queueno = ((pkt[1] >> 4) & 0xf); + + num_blocks = len / block_size; + + if (len % block_size) + num_blocks++; + + address = (num_blocks * block_size | (queueno << 12)); + length = num_blocks * block_size; + + status = rsi_sdio_write_register_multiple(adapter, + address, + (u8 *)pkt, + length); + if (status) + rsi_dbg(ERR_ZONE, "%s: Unable to write onto the card: %d\n", + __func__, status); + rsi_dbg(DATA_TX_ZONE, "%s: Successfully written onto card\n", __func__); + return status; +} + +/** + * rsi_sdio_host_intf_read_pkt() - This function reads the packet + from the device. + * @adapter: Pointer to the adapter data structure. + * @pkt: Pointer to the packet data to be read from the the device. + * @length: Length of the data to be read from the device. + * + * Return: 0 on success, -1 on failure. + */ +int rsi_sdio_host_intf_read_pkt(struct rsi_hw *adapter, + u8 *pkt, + u32 length) +{ + int status = -EINVAL; + + if (!length) { + rsi_dbg(ERR_ZONE, "%s: Pkt size is zero\n", __func__); + return status; + } + + status = rsi_sdio_read_register_multiple(adapter, + length, + length, /*num of bytes*/ + (u8 *)pkt); + + if (status) + rsi_dbg(ERR_ZONE, "%s: Failed to read frame: %d\n", __func__, + status); + return status; +} + +/** + * rsi_init_sdio_interface() - This function does init specific to SDIO. + * + * @adapter: Pointer to the adapter data structure. + * @pkt: Pointer to the packet data to be read from the the device. + * + * Return: 0 on success, -1 on failure. + */ + +static int rsi_init_sdio_interface(struct rsi_hw *adapter, + struct sdio_func *pfunction) +{ + struct rsi_91x_sdiodev *rsi_91x_dev; + int status = -ENOMEM; + + rsi_91x_dev = kzalloc(sizeof(*rsi_91x_dev), GFP_KERNEL); + if (!rsi_91x_dev) + return status; + + adapter->rsi_dev = rsi_91x_dev; + + sdio_claim_host(pfunction); + + pfunction->enable_timeout = 100; + status = sdio_enable_func(pfunction); + if (status) { + rsi_dbg(ERR_ZONE, "%s: Failed to enable interface\n", __func__); + sdio_release_host(pfunction); + return status; + } + + rsi_dbg(INIT_ZONE, "%s: Enabled the interface\n", __func__); + + rsi_91x_dev->pfunction = pfunction; + adapter->device = &pfunction->dev; + + sdio_set_drvdata(pfunction, adapter); + + status = rsi_setupcard(adapter); + if (status) { + rsi_dbg(ERR_ZONE, "%s: Failed to setup card\n", __func__); + goto fail; + } + + rsi_dbg(INIT_ZONE, "%s: Setup card succesfully\n", __func__); + + status = rsi_init_sdio_slave_regs(adapter); + if (status) { + rsi_dbg(ERR_ZONE, "%s: Failed to init slave regs\n", __func__); + goto fail; + } + sdio_release_host(pfunction); + + adapter->host_intf_write_pkt = rsi_sdio_host_intf_write_pkt; + adapter->host_intf_read_pkt = rsi_sdio_host_intf_read_pkt; + adapter->determine_event_timeout = rsi_sdio_determine_event_timeout; + adapter->check_hw_queue_status = rsi_sdio_read_buffer_status_register; + +#ifdef CPTCFG_RSI_DEBUGFS + adapter->num_debugfs_entries = MAX_DEBUGFS_ENTRIES; +#endif + return status; +fail: + sdio_disable_func(pfunction); + sdio_release_host(pfunction); + return status; +} + +/** + * rsi_probe() - This function is called by kernel when the driver provided + * Vendor and device IDs are matched. All the initialization + * work is done here. + * @pfunction: Pointer to the sdio_func structure. + * @id: Pointer to sdio_device_id structure. + * + * Return: 0 on success, 1 on failure. + */ +static int rsi_probe(struct sdio_func *pfunction, + const struct sdio_device_id *id) +{ + struct rsi_hw *adapter; + + rsi_dbg(INIT_ZONE, "%s: Init function called\n", __func__); + + adapter = rsi_91x_init(); + if (!adapter) { + rsi_dbg(ERR_ZONE, "%s: Failed to init os intf ops\n", + __func__); + return 1; + } + + if (rsi_init_sdio_interface(adapter, pfunction)) { + rsi_dbg(ERR_ZONE, "%s: Failed to init sdio interface\n", + __func__); + goto fail; + } + + if (rsi_sdio_device_init(adapter->priv)) { + rsi_dbg(ERR_ZONE, "%s: Failed in device init\n", __func__); + sdio_claim_host(pfunction); + sdio_disable_func(pfunction); + sdio_release_host(pfunction); + goto fail; + } + + sdio_claim_host(pfunction); + if (sdio_claim_irq(pfunction, rsi_handle_interrupt)) { + rsi_dbg(ERR_ZONE, "%s: Failed to request IRQ\n", __func__); + sdio_release_host(pfunction); + goto fail; + } + + sdio_release_host(pfunction); + rsi_dbg(INIT_ZONE, "%s: Registered Interrupt handler\n", __func__); + + return 0; +fail: + rsi_91x_deinit(adapter); + rsi_dbg(ERR_ZONE, "%s: Failed in probe...Exiting\n", __func__); + return 1; +} + +/** + * rsi_disconnect() - This function performs the reverse of the probe function. + * @pfunction: Pointer to the sdio_func structure. + * + * Return: void. + */ +static void rsi_disconnect(struct sdio_func *pfunction) +{ + struct rsi_hw *adapter = sdio_get_drvdata(pfunction); + struct rsi_91x_sdiodev *dev; + + if (!adapter) + return; + + dev = (struct rsi_91x_sdiodev *)adapter->rsi_dev; + + dev->write_fail = 2; + rsi_mac80211_detach(adapter); + + sdio_claim_host(pfunction); + sdio_release_irq(pfunction); + sdio_disable_func(pfunction); + rsi_91x_deinit(adapter); + /* Resetting to take care of the case, where-in driver is re-loaded */ + rsi_reset_card(pfunction); + sdio_release_host(pfunction); +} + +#ifdef CONFIG_PM +static int rsi_suspend(struct device *dev) +{ + /* Not yet implemented */ + return -ENOSYS; +} + +static int rsi_resume(struct device *dev) +{ + /* Not yet implemented */ + return -ENOSYS; +} + +static const struct dev_pm_ops rsi_pm_ops = { + .suspend = rsi_suspend, + .resume = rsi_resume, +}; +#endif + +static const struct sdio_device_id rsi_dev_table[] = { + { SDIO_DEVICE(0x303, 0x100) }, + { SDIO_DEVICE(0x041B, 0x0301) }, + { SDIO_DEVICE(0x041B, 0x0201) }, + { SDIO_DEVICE(0x041B, 0x9330) }, + { /* Blank */}, +}; + +static struct sdio_driver rsi_driver = { + .name = "RSI-SDIO WLAN", + .probe = rsi_probe, + .remove = rsi_disconnect, + .id_table = rsi_dev_table, +#ifdef CONFIG_PM + .drv = { + .pm = &rsi_pm_ops, + } +#endif +}; + +/** + * rsi_module_init() - This function registers the sdio module. + * @void: Void. + * + * Return: 0 on success. + */ +static int rsi_module_init(void) +{ + int ret; + + ret = sdio_register_driver(&rsi_driver); + rsi_dbg(INIT_ZONE, "%s: Registering driver\n", __func__); + return ret; +} + +/** + * rsi_module_exit() - This function unregisters the sdio module. + * @void: Void. + * + * Return: None. + */ +static void rsi_module_exit(void) +{ + sdio_unregister_driver(&rsi_driver); + rsi_dbg(INFO_ZONE, "%s: Unregistering driver\n", __func__); +} + +module_init(rsi_module_init); +module_exit(rsi_module_exit); + +MODULE_AUTHOR("Redpine Signals Inc"); +MODULE_DESCRIPTION("Common SDIO layer for RSI drivers"); +MODULE_SUPPORTED_DEVICE("RSI-91x"); +MODULE_DEVICE_TABLE(sdio, rsi_dev_table); +MODULE_FIRMWARE(FIRMWARE_RSI9113); +MODULE_VERSION("0.1"); +MODULE_LICENSE("Dual BSD/GPL"); |