diff options
| author | Fugang Duan <B38611@freescale.com> | 2012-01-11 13:34:40 +0800 |
|---|---|---|
| committer | Frank Li <Frank.Li@freescale.com> | 2012-01-12 09:07:12 +0800 |
| commit | 3a6c81d7fae75f46f8f47a921247887a2e3c213a (patch) | |
| tree | e4e58b28cff23b6aa41307ffb3e226c593dfc5f9 | |
| parent | 352139385517e62885cb9f7a48c89f12572bd719 (diff) | |
ENGR00171622 - FEC : workaround for Gb enet in sabrelite board.
Micrel phy KSZ9021 Gb speed cannot work well in i.MX6 sabrelite
board. Advertise PHY is not 1000Base-T capable.
If nfs boot kernel, phy will work at 100Mbps, or else phy will
work at Gbps mode. And if hot-plugin cable, phy will work at Gbps
mode. Enet can work well in all of them.
But in Gbps mode, uDMA sometime cannot write frame "L" bit in
exuberate transfer, so driver will print some warning message:
"FEC ENET: rcv is not +last"
Signed-off-by: Fugang Duan <B38611@freescale.com>
| -rwxr-xr-x | arch/arm/mach-mx6/board-mx6q_sabrelite.c | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/arch/arm/mach-mx6/board-mx6q_sabrelite.c b/arch/arm/mach-mx6/board-mx6q_sabrelite.c index f723048d4f5c..cb22baae013c 100755 --- a/arch/arm/mach-mx6/board-mx6q_sabrelite.c +++ b/arch/arm/mach-mx6/board-mx6q_sabrelite.c @@ -428,8 +428,8 @@ static inline void mx6q_sabrelite_init_uart(void) static int mx6q_sabrelite_fec_phy_init(struct phy_device *phydev) { - /* prefer master mode, 1000 Base-T capable */ - phy_write(phydev, 0x9, 0x0f00); + /* prefer master mode, disable 1000 Base-T capable */ + phy_write(phydev, 0x9, 0x1c00); /* min rx data delay */ phy_write(phydev, 0x0b, 0x8105); |