diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2008-05-12 09:03:42 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2008-05-12 09:03:42 -0700 |
| commit | 8d97b84935b28ed8944d1be31859a3df7ebe93ae (patch) | |
| tree | ed0f23dde45812aec86a9ff0c14df3477f9d136c | |
| parent | 9f1a0735395ba2b2efa5012b5bf7f915299f1a79 (diff) | |
| parent | cb0e8b0fba53e1aa6c4786bc465cfc641e8a77e7 (diff) | |
Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (28 commits)
[MIPS] Pb1000: bury the remnants of the PCI code
[MIPS] Fix build failure in mips oprofile code
[MIPS] fix warning message on SMP kernels
[MIPS] markeins: build fix
[MIPS] ELF handling - use SELFMAG instead of numeric constant
[MIPS] Get rid of __ilog2
[MIPS] Fix __fls for non-MIPS32/MIPS64 cpus
[MIPS] XXS1500 code style cleanup
[MIPS] MTX-1 code style cleanup
[MIPS] Pb1200/DBAu1200 code style cleanup
[MIPS] Pb1550 code style cleanup
[MIPS] Pb1500 code style cleanup
[MIPS] Pb1100 code style cleanup
[MIPS] Pb1000 code style cleanup
[MIPS] DBAu1xx0 code style cleanup
[MIPS] Alchemy PCI code style cleanup
[MIPS] Alchemy common code style cleanup
[MIPS] Alchemy common headers style cleanup
[MIPS] Add empty argument parenthesis to GCC_IMM_ASM
[MIPS] msp_hwbutton.c: minor irq handler cleanups
...
83 files changed, 2494 insertions, 2706 deletions
diff --git a/arch/mips/au1000/common/Makefile b/arch/mips/au1000/common/Makefile index 90e2d7a46e8e..dd0e19dacfcf 100644 --- a/arch/mips/au1000/common/Makefile +++ b/arch/mips/au1000/common/Makefile @@ -1,9 +1,8 @@ # -# Copyright 2000 MontaVista Software Inc. -# Author: MontaVista Software, Inc. -# ppopov@mvista.com or source@mvista.com +# Copyright 2000, 2008 MontaVista Software Inc. +# Author: MontaVista Software, Inc. <source@mvista.com> # -# Makefile for the Alchemy Au1000 CPU, generic files. +# Makefile for the Alchemy Au1xx0 CPUs, generic files. # obj-y += prom.o irq.o puts.o time.o reset.o \ diff --git a/arch/mips/au1000/common/au1xxx_irqmap.c b/arch/mips/au1000/common/au1xxx_irqmap.c index 37a10a01de9d..c7ca1596394c 100644 --- a/arch/mips/au1000/common/au1xxx_irqmap.c +++ b/arch/mips/au1000/common/au1xxx_irqmap.c @@ -40,20 +40,20 @@ struct au1xxx_irqmap __initdata au1xxx_ic0_map[] = { #if defined(CONFIG_SOC_AU1000) - { AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0}, - { AU1000_UART1_INT, INTC_INT_HIGH_LEVEL, 0}, - { AU1000_UART2_INT, INTC_INT_HIGH_LEVEL, 0}, - { AU1000_UART3_INT, INTC_INT_HIGH_LEVEL, 0}, - { AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0}, - { AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0}, - { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0}, - { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0}, - { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0}, - { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0}, - { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0}, - { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0}, - { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0}, - { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0}, + { AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_UART1_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_UART2_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_UART3_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0 }, { AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 }, { AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, { AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, @@ -62,32 +62,32 @@ struct au1xxx_irqmap __initdata au1xxx_ic0_map[] = { { AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, { AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, { AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0}, - { AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0}, + { AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0 }, { AU1000_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 }, { AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 }, { AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 }, { AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0}, - { AU1000_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0}, + { AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0 }, { AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 }, #elif defined(CONFIG_SOC_AU1500) - { AU1500_UART0_INT, INTC_INT_HIGH_LEVEL, 0}, + { AU1500_UART0_INT, INTC_INT_HIGH_LEVEL, 0 }, { AU1000_PCI_INTA, INTC_INT_LOW_LEVEL, 0 }, { AU1000_PCI_INTB, INTC_INT_LOW_LEVEL, 0 }, - { AU1500_UART3_INT, INTC_INT_HIGH_LEVEL, 0}, + { AU1500_UART3_INT, INTC_INT_HIGH_LEVEL, 0 }, { AU1000_PCI_INTC, INTC_INT_LOW_LEVEL, 0 }, { AU1000_PCI_INTD, INTC_INT_LOW_LEVEL, 0 }, - { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0}, - { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0}, - { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0}, - { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0}, - { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0}, - { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0}, - { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0}, - { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0}, + { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0 }, { AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 }, { AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, { AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, @@ -100,26 +100,26 @@ struct au1xxx_irqmap __initdata au1xxx_ic0_map[] = { { AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 }, { AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 }, { AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1500_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0}, - { AU1500_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0}, + { AU1500_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1500_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0 }, { AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 }, #elif defined(CONFIG_SOC_AU1100) - { AU1100_UART0_INT, INTC_INT_HIGH_LEVEL, 0}, - { AU1100_UART1_INT, INTC_INT_HIGH_LEVEL, 0}, - { AU1100_SD_INT, INTC_INT_HIGH_LEVEL, 0}, - { AU1100_UART3_INT, INTC_INT_HIGH_LEVEL, 0}, - { AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0}, - { AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0}, - { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0}, - { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0}, - { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0}, - { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0}, - { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0}, - { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0}, - { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0}, - { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0}, + { AU1100_UART0_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1100_UART1_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1100_SD_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1100_UART3_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0 }, { AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 }, { AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, { AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, @@ -128,33 +128,33 @@ struct au1xxx_irqmap __initdata au1xxx_ic0_map[] = { { AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, { AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, { AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0}, - { AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0}, + { AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0 }, { AU1000_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 }, { AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 }, { AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 }, { AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1100_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0}, - /*{ AU1000_GPIO215_208_INT, INTC_INT_HIGH_LEVEL, 0},*/ - { AU1100_LCD_INT, INTC_INT_HIGH_LEVEL, 0}, + { AU1100_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 }, + /* { AU1000_GPIO215_208_INT, INTC_INT_HIGH_LEVEL, 0 }, */ + { AU1100_LCD_INT, INTC_INT_HIGH_LEVEL, 0 }, { AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 }, #elif defined(CONFIG_SOC_AU1550) - { AU1550_UART0_INT, INTC_INT_HIGH_LEVEL, 0}, + { AU1550_UART0_INT, INTC_INT_HIGH_LEVEL, 0 }, { AU1550_PCI_INTA, INTC_INT_LOW_LEVEL, 0 }, { AU1550_PCI_INTB, INTC_INT_LOW_LEVEL, 0 }, - { AU1550_DDMA_INT, INTC_INT_HIGH_LEVEL, 0}, - { AU1550_CRYPTO_INT, INTC_INT_HIGH_LEVEL, 0}, + { AU1550_DDMA_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1550_CRYPTO_INT, INTC_INT_HIGH_LEVEL, 0 }, { AU1550_PCI_INTC, INTC_INT_LOW_LEVEL, 0 }, { AU1550_PCI_INTD, INTC_INT_LOW_LEVEL, 0 }, { AU1550_PCI_RST_INT, INTC_INT_LOW_LEVEL, 0 }, - { AU1550_UART1_INT, INTC_INT_HIGH_LEVEL, 0}, - { AU1550_UART3_INT, INTC_INT_HIGH_LEVEL, 0}, - { AU1550_PSC0_INT, INTC_INT_HIGH_LEVEL, 0}, - { AU1550_PSC1_INT, INTC_INT_HIGH_LEVEL, 0}, - { AU1550_PSC2_INT, INTC_INT_HIGH_LEVEL, 0}, - { AU1550_PSC3_INT, INTC_INT_HIGH_LEVEL, 0}, + { AU1550_UART1_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1550_UART3_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1550_PSC0_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1550_PSC1_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1550_PSC2_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1550_PSC3_INT, INTC_INT_HIGH_LEVEL, 0 }, { AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 }, { AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, { AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, @@ -163,26 +163,26 @@ struct au1xxx_irqmap __initdata au1xxx_ic0_map[] = { { AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, { AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, { AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1550_NAND_INT, INTC_INT_RISE_EDGE, 0}, + { AU1550_NAND_INT, INTC_INT_RISE_EDGE, 0 }, { AU1550_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 }, { AU1550_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 }, { AU1550_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 }, - { AU1550_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0}, - { AU1550_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0}, + { AU1550_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1550_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0 }, #elif defined(CONFIG_SOC_AU1200) - { AU1200_UART0_INT, INTC_INT_HIGH_LEVEL, 0}, + { AU1200_UART0_INT, INTC_INT_HIGH_LEVEL, 0 }, { AU1200_SWT_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1200_SD_INT, INTC_INT_HIGH_LEVEL, 0}, - { AU1200_DDMA_INT, INTC_INT_HIGH_LEVEL, 0}, + { AU1200_SD_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1200_DDMA_INT, INTC_INT_HIGH_LEVEL, 0 }, { AU1200_MAE_BE_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1200_UART1_INT, INTC_INT_HIGH_LEVEL, 0}, + { AU1200_UART1_INT, INTC_INT_HIGH_LEVEL, 0 }, { AU1200_MAE_FE_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1200_PSC0_INT, INTC_INT_HIGH_LEVEL, 0}, - { AU1200_PSC1_INT, INTC_INT_HIGH_LEVEL, 0}, - { AU1200_AES_INT, INTC_INT_HIGH_LEVEL, 0}, - { AU1200_CAMERA_INT, INTC_INT_HIGH_LEVEL, 0}, + { AU1200_PSC0_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1200_PSC1_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1200_AES_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1200_CAMERA_INT, INTC_INT_HIGH_LEVEL, 0 }, { AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 }, { AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, { AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, @@ -191,10 +191,10 @@ struct au1xxx_irqmap __initdata au1xxx_ic0_map[] = { { AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, { AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, { AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1200_NAND_INT, INTC_INT_RISE_EDGE, 0}, + { AU1200_NAND_INT, INTC_INT_RISE_EDGE, 0 }, { AU1200_USB_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1200_LCD_INT, INTC_INT_HIGH_LEVEL, 0}, - { AU1200_MAE_BOTH_INT, INTC_INT_HIGH_LEVEL, 0}, + { AU1200_LCD_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1200_MAE_BOTH_INT, INTC_INT_HIGH_LEVEL, 0 }, #else #error "Error: Unknown Alchemy SOC" @@ -203,4 +203,3 @@ struct au1xxx_irqmap __initdata au1xxx_ic0_map[] = { }; int __initdata au1xxx_ic0_nr_irqs = ARRAY_SIZE(au1xxx_ic0_map); - diff --git a/arch/mips/au1000/common/clocks.c b/arch/mips/au1000/common/clocks.c index 3ce6cace0eb0..46f8ee0e2657 100644 --- a/arch/mips/au1000/common/clocks.c +++ b/arch/mips/au1000/common/clocks.c @@ -1,10 +1,9 @@ /* * BRIEF MODULE DESCRIPTION - * Simple Au1000 clocks routines. + * Simple Au1xx0 clocks routines. * - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -30,8 +29,8 @@ #include <linux/module.h> #include <asm/mach-au1x00/au1000.h> -static unsigned int au1x00_clock; // Hz -static unsigned int lcd_clock; // KHz +static unsigned int au1x00_clock; /* Hz */ +static unsigned int lcd_clock; /* KHz */ static unsigned long uart_baud_base; /* @@ -47,8 +46,6 @@ unsigned int get_au1x00_speed(void) return au1x00_clock; } - - /* * The UART baud base is not known at compile time ... if * we want to be able to use the same code on different @@ -73,24 +70,23 @@ void set_au1x00_uart_baud_base(unsigned long new_baud_base) void set_au1x00_lcd_clock(void) { unsigned int static_cfg0; - unsigned int sys_busclk = - (get_au1x00_speed()/1000) / - ((int)(au_readl(SYS_POWERCTRL)&0x03) + 2); + unsigned int sys_busclk = (get_au1x00_speed() / 1000) / + ((int)(au_readl(SYS_POWERCTRL) & 0x03) + 2); static_cfg0 = au_readl(MEM_STCFG0); - if (static_cfg0 & (1<<11)) + if (static_cfg0 & (1 << 11)) lcd_clock = sys_busclk / 5; /* note: BCLK switching fails with D5 */ else lcd_clock = sys_busclk / 4; if (lcd_clock > 50000) /* Epson MAX */ - printk("warning: LCD clock too high (%d KHz)\n", lcd_clock); + printk(KERN_WARNING "warning: LCD clock too high (%u KHz)\n", + lcd_clock); } unsigned int get_au1x00_lcd_clock(void) { return lcd_clock; } - EXPORT_SYMBOL(get_au1x00_lcd_clock); diff --git a/arch/mips/au1000/common/cputable.c b/arch/mips/au1000/common/cputable.c index 8c93a05d7382..ba6430bc2d03 100644 --- a/arch/mips/au1000/common/cputable.c +++ b/arch/mips/au1000/common/cputable.c @@ -14,7 +14,7 @@ #include <asm/mach-au1x00/au1000.h> -struct cpu_spec* cur_cpu_spec[NR_CPUS]; +struct cpu_spec *cur_cpu_spec[NR_CPUS]; /* With some thought, we can probably use the mask to reduce the * size of the table. @@ -39,8 +39,7 @@ struct cpu_spec cpu_specs[] = { { 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0, 0 } }; -void -set_cpuspec(void) +void set_cpuspec(void) { struct cpu_spec *sp; u32 prid; diff --git a/arch/mips/au1000/common/dbdma.c b/arch/mips/au1000/common/dbdma.c index 53377dfc0640..42d555236de1 100644 --- a/arch/mips/au1000/common/dbdma.c +++ b/arch/mips/au1000/common/dbdma.c @@ -53,12 +53,11 @@ */ static DEFINE_SPINLOCK(au1xxx_dbdma_spin_lock); -/* I couldn't find a macro that did this...... -*/ +/* I couldn't find a macro that did this... */ #define ALIGN_ADDR(x, a) ((((u32)(x)) + (a-1)) & ~(a-1)) static dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE; -static int dbdma_initialized=0; +static int dbdma_initialized; static void au1xxx_dbdma_init(void); static dbdev_tab_t dbdev_tab[] = { @@ -149,7 +148,7 @@ static dbdev_tab_t dbdev_tab[] = { { DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, -#endif // CONFIG_SOC_AU1200 +#endif /* CONFIG_SOC_AU1200 */ { DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, { DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, @@ -177,8 +176,7 @@ static dbdev_tab_t dbdev_tab[] = { static chan_tab_t *chan_tab_ptr[NUM_DBDMA_CHANS]; -static dbdev_tab_t * -find_dbdev_id(u32 id) +static dbdev_tab_t *find_dbdev_id(u32 id) { int i; dbdev_tab_t *p; @@ -190,29 +188,27 @@ find_dbdev_id(u32 id) return NULL; } -void * au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp) +void *au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp) { - return phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); + return phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); } EXPORT_SYMBOL(au1xxx_ddma_get_nextptr_virt); -u32 -au1xxx_ddma_add_device(dbdev_tab_t *dev) +u32 au1xxx_ddma_add_device(dbdev_tab_t *dev) { u32 ret = 0; - dbdev_tab_t *p=NULL; - static u16 new_id=0x1000; + dbdev_tab_t *p; + static u16 new_id = 0x1000; p = find_dbdev_id(~0); - if ( NULL != p ) - { + if (NULL != p) { memcpy(p, dev, sizeof(dbdev_tab_t)); p->dev_id = DSCR_DEV2CUSTOM_ID(new_id, dev->dev_id); ret = p->dev_id; new_id++; #if 0 - printk("add_device: id:%x flags:%x padd:%x\n", - p->dev_id, p->dev_flags, p->dev_physaddr ); + printk(KERN_DEBUG "add_device: id:%x flags:%x padd:%x\n", + p->dev_id, p->dev_flags, p->dev_physaddr); #endif } @@ -220,10 +216,8 @@ au1xxx_ddma_add_device(dbdev_tab_t *dev) } EXPORT_SYMBOL(au1xxx_ddma_add_device); -/* Allocate a channel and return a non-zero descriptor if successful. -*/ -u32 -au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, +/* Allocate a channel and return a non-zero descriptor if successful. */ +u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, void (*callback)(int, void *), void *callparam) { unsigned long flags; @@ -234,7 +228,8 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, chan_tab_t *ctp; au1x_dma_chan_t *cp; - /* We do the intialization on the first channel allocation. + /* + * We do the intialization on the first channel allocation. * We have to wait because of the interrupt handler initialization * which can't be done successfully during board set up. */ @@ -242,16 +237,17 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, au1xxx_dbdma_init(); dbdma_initialized = 1; - if ((stp = find_dbdev_id(srcid)) == NULL) + stp = find_dbdev_id(srcid); + if (stp == NULL) return 0; - if ((dtp = find_dbdev_id(destid)) == NULL) + dtp = find_dbdev_id(destid); + if (dtp == NULL) return 0; used = 0; rv = 0; - /* Check to see if we can get both channels. - */ + /* Check to see if we can get both channels. */ spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags); if (!(stp->dev_flags & DEV_FLAGS_INUSE) || (stp->dev_flags & DEV_FLAGS_ANYUSE)) { @@ -261,35 +257,30 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, (dtp->dev_flags & DEV_FLAGS_ANYUSE)) { /* Got destination */ dtp->dev_flags |= DEV_FLAGS_INUSE; - } - else { - /* Can't get dest. Release src. - */ + } else { + /* Can't get dest. Release src. */ stp->dev_flags &= ~DEV_FLAGS_INUSE; used++; } - } - else { + } else used++; - } spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags); if (!used) { - /* Let's see if we can allocate a channel for it. - */ + /* Let's see if we can allocate a channel for it. */ ctp = NULL; chan = 0; spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags); - for (i=0; i<NUM_DBDMA_CHANS; i++) { + for (i = 0; i < NUM_DBDMA_CHANS; i++) if (chan_tab_ptr[i] == NULL) { - /* If kmalloc fails, it is caught below same + /* + * If kmalloc fails, it is caught below same * as a channel not available. */ ctp = kmalloc(sizeof(chan_tab_t), GFP_ATOMIC); chan_tab_ptr[i] = ctp; break; } - } spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags); if (ctp != NULL) { @@ -304,8 +295,7 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, ctp->chan_callback = callback; ctp->chan_callparam = callparam; - /* Initialize channel configuration. - */ + /* Initialize channel configuration. */ i = 0; if (stp->dev_intlevel) i |= DDMA_CFG_SED; @@ -326,8 +316,7 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, * operations. */ rv = (u32)(&chan_tab_ptr[chan]); - } - else { + } else { /* Release devices */ stp->dev_flags &= ~DEV_FLAGS_INUSE; dtp->dev_flags &= ~DEV_FLAGS_INUSE; @@ -337,11 +326,11 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, } EXPORT_SYMBOL(au1xxx_dbdma_chan_alloc); -/* Set the device width if source or destination is a FIFO. +/* + * Set the device width if source or destination is a FIFO. * Should be 8, 16, or 32 bits. */ -u32 -au1xxx_dbdma_set_devwidth(u32 chanid, int bits) +u32 au1xxx_dbdma_set_devwidth(u32 chanid, int bits) { u32 rv; chan_tab_t *ctp; @@ -365,10 +354,8 @@ au1xxx_dbdma_set_devwidth(u32 chanid, int bits) } EXPORT_SYMBOL(au1xxx_dbdma_set_devwidth); -/* Allocate a descriptor ring, initializing as much as possible. -*/ -u32 -au1xxx_dbdma_ring_alloc(u32 chanid, int entries) +/* Allocate a descriptor ring, initializing as much as possible. */ +u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries) { int i; u32 desc_base, srcid, destid; @@ -378,43 +365,45 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries) dbdev_tab_t *stp, *dtp; au1x_ddma_desc_t *dp; - /* I guess we could check this to be within the + /* + * I guess we could check this to be within the * range of the table...... */ ctp = *((chan_tab_t **)chanid); stp = ctp->chan_src; dtp = ctp->chan_dest; - /* The descriptors must be 32-byte aligned. There is a + /* + * The descriptors must be 32-byte aligned. There is a * possibility the allocation will give us such an address, * and if we try that first we are likely to not waste larger * slabs of memory. */ desc_base = (u32)kmalloc(entries * sizeof(au1x_ddma_desc_t), - GFP_KERNEL|GFP_DMA); + GFP_KERNEL|GFP_DMA); if (desc_base == 0) return 0; if (desc_base & 0x1f) { - /* Lost....do it again, allocate extra, and round + /* + * Lost....do it again, allocate extra, and round * the address base. */ kfree((const void *)desc_base); i = entries * sizeof(au1x_ddma_desc_t); i += (sizeof(au1x_ddma_desc_t) - 1); - if ((desc_base = (u32)kmalloc(i, GFP_KERNEL|GFP_DMA)) == 0) + desc_base = (u32)kmalloc(i, GFP_KERNEL|GFP_DMA); + if (desc_base == 0) return 0; desc_base = ALIGN_ADDR(desc_base, sizeof(au1x_ddma_desc_t)); } dp = (au1x_ddma_desc_t *)desc_base; - /* Keep track of the base descriptor. - */ + /* Keep track of the base descriptor. */ ctp->chan_desc_base = dp; - /* Initialize the rings with as much information as we know. - */ + /* Initialize the rings with as much information as we know. */ srcid = stp->dev_id; destid = dtp->dev_id; @@ -426,11 +415,12 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries) cmd0 |= DSCR_CMD0_IE | DSCR_CMD0_CV; cmd0 |= DSCR_CMD0_ST(DSCR_CMD0_ST_NOCHANGE); - /* is it mem to mem transfer? */ - if(((DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_THROTTLE) || (DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_ALWAYS)) && - ((DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_THROTTLE) || (DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_ALWAYS))) { - cmd0 |= DSCR_CMD0_MEM; - } + /* Is it mem to mem transfer? */ + if (((DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_THROTTLE) || + (DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_ALWAYS)) && + ((DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_THROTTLE) || + (DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_ALWAYS))) + cmd0 |= DSCR_CMD0_MEM; switch (stp->dev_devwidth) { case 8: @@ -458,15 +448,17 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries) break; } - /* If the device is marked as an in/out FIFO, ensure it is + /* + * If the device is marked as an in/out FIFO, ensure it is * set non-coherent. */ if (stp->dev_flags & DEV_FLAGS_IN) - cmd0 |= DSCR_CMD0_SN; /* Source in fifo */ + cmd0 |= DSCR_CMD0_SN; /* Source in FIFO */ if (dtp->dev_flags & DEV_FLAGS_OUT) - cmd0 |= DSCR_CMD0_DN; /* Destination out fifo */ + cmd0 |= DSCR_CMD0_DN; /* Destination out FIFO */ - /* Set up source1. For now, assume no stride and increment. + /* + * Set up source1. For now, assume no stride and increment. * A channel attribute update can change this later. */ switch (stp->dev_tsize) { @@ -485,19 +477,19 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries) break; } - /* If source input is fifo, set static address. - */ + /* If source input is FIFO, set static address. */ if (stp->dev_flags & DEV_FLAGS_IN) { - if ( stp->dev_flags & DEV_FLAGS_BURSTABLE ) + if (stp->dev_flags & DEV_FLAGS_BURSTABLE) src1 |= DSCR_SRC1_SAM(DSCR_xAM_BURST); else - src1 |= DSCR_SRC1_SAM(DSCR_xAM_STATIC); - + src1 |= DSCR_SRC1_SAM(DSCR_xAM_STATIC); } + if (stp->dev_physaddr) src0 = stp->dev_physaddr; - /* Set up dest1. For now, assume no stride and increment. + /* + * Set up dest1. For now, assume no stride and increment. * A channel attribute update can change this later. */ switch (dtp->dev_tsize) { @@ -516,22 +508,24 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries) break; } - /* If destination output is fifo, set static address. - */ + /* If destination output is FIFO, set static address. */ if (dtp->dev_flags & DEV_FLAGS_OUT) { - if ( dtp->dev_flags & DEV_FLAGS_BURSTABLE ) - dest1 |= DSCR_DEST1_DAM(DSCR_xAM_BURST); - else - dest1 |= DSCR_DEST1_DAM(DSCR_xAM_STATIC); + if (dtp->dev_flags & DEV_FLAGS_BURSTABLE) + dest1 |= DSCR_DEST1_DAM(DSCR_xAM_BURST); + else + dest1 |= DSCR_DEST1_DAM(DSCR_xAM_STATIC); } + if (dtp->dev_physaddr) dest0 = dtp->dev_physaddr; #if 0 - printk("did:%x sid:%x cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n", - dtp->dev_id, stp->dev_id, cmd0, cmd1, src0, src1, dest0, dest1 ); + printk(KERN_DEBUG "did:%x sid:%x cmd0:%x cmd1:%x source0:%x " + "source1:%x dest0:%x dest1:%x\n", + dtp->dev_id, stp->dev_id, cmd0, cmd1, src0, + src1, dest0, dest1); #endif - for (i=0; i<entries; i++) { + for (i = 0; i < entries; i++) { dp->dscr_cmd0 = cmd0; dp->dscr_cmd1 = cmd1; dp->dscr_source0 = src0; @@ -545,49 +539,49 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries) dp++; } - /* Make last descrptor point to the first. - */ + /* Make last descrptor point to the first. */ dp--; dp->dscr_nxtptr = DSCR_NXTPTR(virt_to_phys(ctp->chan_desc_base)); ctp->get_ptr = ctp->put_ptr = ctp->cur_ptr = ctp->chan_desc_base; - return (u32)(ctp->chan_desc_base); + return (u32)ctp->chan_desc_base; } EXPORT_SYMBOL(au1xxx_dbdma_ring_alloc); -/* Put a source buffer into the DMA ring. +/* + * Put a source buffer into the DMA ring. * This updates the source pointer and byte count. Normally used * for memory to fifo transfers. */ -u32 -_au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags) +u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags) { chan_tab_t *ctp; au1x_ddma_desc_t *dp; - /* I guess we could check this to be within the + /* + * I guess we could check this to be within the * range of the table...... */ - ctp = *((chan_tab_t **)chanid); + ctp = *(chan_tab_t **)chanid; - /* We should have multiple callers for a particular channel, + /* + * We should have multiple callers for a particular channel, * an interrupt doesn't affect this pointer nor the descriptor, * so no locking should be needed. */ dp = ctp->put_ptr; - /* If the descriptor is valid, we are way ahead of the DMA + /* + * If the descriptor is valid, we are way ahead of the DMA * engine, so just return an error condition. */ - if (dp->dscr_cmd0 & DSCR_CMD0_V) { + if (dp->dscr_cmd0 & DSCR_CMD0_V) return 0; - } - /* Load up buffer address and byte count. - */ + /* Load up buffer address and byte count. */ dp->dscr_source0 = virt_to_phys(buf); dp->dscr_cmd1 = nbytes; - /* Check flags */ + /* Check flags */ if (flags & DDMA_FLAGS_IE) dp->dscr_cmd0 |= DSCR_CMD0_IE; if (flags & DDMA_FLAGS_NOIE) @@ -595,23 +589,21 @@ _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags) /* * There is an errata on the Au1200/Au1550 parts that could result - * in "stale" data being DMA'd. It has to do with the snoop logic on - * the dache eviction buffer. NONCOHERENT_IO is on by default for - * these parts. If it is fixedin the future, these dma_cache_inv will + * in "stale" data being DMA'ed. It has to do with the snoop logic on + * the cache eviction buffer. DMA_NONCOHERENT is on by default for + * these parts. If it is fixed in the future, these dma_cache_inv will * just be nothing more than empty macros. See io.h. - * */ + */ dma_cache_wback_inv((unsigned long)buf, nbytes); - dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */ + dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */ au_sync(); dma_cache_wback_inv((unsigned long)dp, sizeof(dp)); - ctp->chan_ptr->ddma_dbell = 0; + ctp->chan_ptr->ddma_dbell = 0; - /* Get next descriptor pointer. - */ + /* Get next descriptor pointer. */ ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); - /* return something not zero. - */ + /* Return something non-zero. */ return nbytes; } EXPORT_SYMBOL(_au1xxx_dbdma_put_source); @@ -654,81 +646,77 @@ _au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags) dp->dscr_dest0 = virt_to_phys(buf); dp->dscr_cmd1 = nbytes; #if 0 - printk("cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n", - dp->dscr_cmd0, dp->dscr_cmd1, dp->dscr_source0, - dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1 ); + printk(KERN_DEBUG "cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n", + dp->dscr_cmd0, dp->dscr_cmd1, dp->dscr_source0, + dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1); #endif /* * There is an errata on the Au1200/Au1550 parts that could result in - * "stale" data being DMA'd. It has to do with the snoop logic on the - * dache eviction buffer. NONCOHERENT_IO is on by default for these - * parts. If it is fixedin the future, these dma_cache_inv will just + * "stale" data being DMA'ed. It has to do with the snoop logic on the + * cache eviction buffer. DMA_NONCOHERENT is on by default for these + * parts. If it is fixed in the future, these dma_cache_inv will just * be nothing more than empty macros. See io.h. - * */ + */ dma_cache_inv((unsigned long)buf, nbytes); dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */ au_sync(); dma_cache_wback_inv((unsigned long)dp, sizeof(dp)); - ctp->chan_ptr->ddma_dbell = 0; + ctp->chan_ptr->ddma_dbell = 0; - /* Get next descriptor pointer. - */ + /* Get next descriptor pointer. */ ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); - /* return something not zero. - */ + /* Return something non-zero. */ return nbytes; } EXPORT_SYMBOL(_au1xxx_dbdma_put_dest); -/* Get a destination buffer into the DMA ring. +/* + * Get a destination buffer into the DMA ring. * Normally used to get a full buffer from the ring during fifo * to memory transfers. This does not set the valid bit, you will * have to put another destination buffer to keep the DMA going. */ -u32 -au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes) +u32 au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes) { chan_tab_t *ctp; au1x_ddma_desc_t *dp; u32 rv; - /* I guess we could check this to be within the + /* + * I guess we could check this to be within the * range of the table...... */ ctp = *((chan_tab_t **)chanid); - /* We should have multiple callers for a particular channel, + /* + * We should have multiple callers for a particular channel, * an interrupt doesn't affect this pointer nor the descriptor, * so no locking should be needed. */ dp = ctp->get_ptr; - /* If the descriptor is valid, we are way ahead of the DMA + /* + * If the descriptor is valid, we are way ahead of the DMA * engine, so just return an error condition. */ if (dp->dscr_cmd0 & DSCR_CMD0_V) return 0; - /* Return buffer address and byte count. - */ + /* Return buffer address and byte count. */ *buf = (void *)(phys_to_virt(dp->dscr_dest0)); *nbytes = dp->dscr_cmd1; rv = dp->dscr_stat; - /* Get next descriptor pointer. - */ + /* Get next descriptor pointer. */ ctp->get_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); - /* return something not zero. - */ + /* Return something non-zero. */ return rv; } - EXPORT_SYMBOL_GPL(au1xxx_dbdma_get_dest); -void -au1xxx_dbdma_stop(u32 chanid) +void au1xxx_dbdma_stop(u32 chanid) { chan_tab_t *ctp; au1x_dma_chan_t *cp; @@ -743,7 +731,7 @@ au1xxx_dbdma_stop(u32 chanid) udelay(1); halt_timeout++; if (halt_timeout > 100) { - printk("warning: DMA channel won't halt\n"); + printk(KERN_WARNING "warning: DMA channel won't halt\n"); break; } } @@ -753,12 +741,12 @@ au1xxx_dbdma_stop(u32 chanid) } EXPORT_SYMBOL(au1xxx_dbdma_stop); -/* Start using the current descriptor pointer. If the dbdma encounters - * a not valid descriptor, it will stop. In this case, we can just +/* + * Start using the current descriptor pointer. If the DBDMA encounters + * a non-valid descriptor, it will stop. In this case, we can just * continue by adding a buffer to the list and starting again. */ -void -au1xxx_dbdma_start(u32 chanid) +void au1xxx_dbdma_start(u32 chanid) { chan_tab_t *ctp; au1x_dma_chan_t *cp; @@ -773,8 +761,7 @@ au1xxx_dbdma_start(u32 chanid) } EXPORT_SYMBOL(au1xxx_dbdma_start); -void -au1xxx_dbdma_reset(u32 chanid) +void au1xxx_dbdma_reset(u32 chanid) { chan_tab_t *ctp; au1x_ddma_desc_t *dp; @@ -784,14 +771,14 @@ au1xxx_dbdma_reset(u32 chanid) ctp = *((chan_tab_t **)chanid); ctp->get_ptr = ctp->put_ptr = ctp->cur_ptr = ctp->chan_desc_base; - /* Run through the descriptors and reset the valid indicator. - */ + /* Run through the descriptors and reset the valid indicator. */ dp = ctp->chan_desc_base; do { dp->dscr_cmd0 &= ~DSCR_CMD0_V; - /* reset our SW status -- this is used to determine - * if a descriptor is in use by upper level SW. Since + /* + * Reset our software status -- this is used to determine + * if a descriptor is in use by upper level software. Since * posting can reset 'V' bit. */ dp->sw_status = 0; @@ -800,8 +787,7 @@ au1xxx_dbdma_reset(u32 chanid) } EXPORT_SYMBOL(au1xxx_dbdma_reset); -u32 -au1xxx_get_dma_residue(u32 chanid) +u32 au1xxx_get_dma_residue(u32 chanid) { chan_tab_t *ctp; au1x_dma_chan_t *cp; @@ -810,18 +796,15 @@ au1xxx_get_dma_residue(u32 chanid) ctp = *((chan_tab_t **)chanid); cp = ctp->chan_ptr; - /* This is only valid if the channel is stopped. - */ + /* This is only valid if the channel is stopped. */ rv = cp->ddma_bytecnt; au_sync(); return rv; } - EXPORT_SYMBOL_GPL(au1xxx_get_dma_residue); -void -au1xxx_dbdma_chan_free(u32 chanid) +void au1xxx_dbdma_chan_free(u32 chanid) { chan_tab_t *ctp; dbdev_tab_t *stp, *dtp; @@ -842,8 +825,7 @@ au1xxx_dbdma_chan_free(u32 chanid) } EXPORT_SYMBOL(au1xxx_dbdma_chan_free); -static irqreturn_t -dbdma_interrupt(int irq, void *dev_id) +static irqreturn_t dbdma_interrupt(int irq, void *dev_id) { u32 intstat; u32 chan_index; @@ -859,13 +841,12 @@ dbdma_interrupt(int irq, void *dev_id) cp = ctp->chan_ptr; dp = ctp->cur_ptr; - /* Reset interrupt. - */ + /* Reset interrupt. */ cp->ddma_irq = 0; au_sync(); if (ctp->chan_callback) - (ctp->chan_callback)(irq, ctp->chan_callparam); + ctp->chan_callback(irq, ctp->chan_callparam); ctp->cur_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); return IRQ_RETVAL(1); @@ -890,47 +871,47 @@ static void au1xxx_dbdma_init(void) if (request_irq(irq_nr, dbdma_interrupt, IRQF_DISABLED, "Au1xxx dbdma", (void *)dbdma_gptr)) - printk("Can't get 1550 dbdma irq"); + printk(KERN_ERR "Can't get 1550 dbdma irq"); } -void -au1xxx_dbdma_dump(u32 chanid) +void au1xxx_dbdma_dump(u32 chanid) { - chan_tab_t *ctp; - au1x_ddma_desc_t *dp; - dbdev_tab_t *stp, *dtp; - au1x_dma_chan_t *cp; - u32 i = 0; + chan_tab_t *ctp; + au1x_ddma_desc_t *dp; + dbdev_tab_t *stp, *dtp; + au1x_dma_chan_t *cp; + u32 i = 0; ctp = *((chan_tab_t **)chanid); stp = ctp->chan_src; dtp = ctp->chan_dest; cp = ctp->chan_ptr; - printk("Chan %x, stp %x (dev %d) dtp %x (dev %d) \n", - (u32)ctp, (u32)stp, stp - dbdev_tab, (u32)dtp, dtp - dbdev_tab); - printk("desc base %x, get %x, put %x, cur %x\n", - (u32)(ctp->chan_desc_base), (u32)(ctp->get_ptr), - (u32)(ctp->put_ptr), (u32)(ctp->cur_ptr)); - - printk("dbdma chan %x\n", (u32)cp); - printk("cfg %08x, desptr %08x, statptr %08x\n", - cp->ddma_cfg, cp->ddma_desptr, cp->ddma_statptr); - printk("dbell %08x, irq %08x, stat %08x, bytecnt %08x\n", - cp->ddma_dbell, cp->ddma_irq, cp->ddma_stat, cp->ddma_bytecnt); - - - /* Run through the descriptors - */ + printk(KERN_DEBUG "Chan %x, stp %x (dev %d) dtp %x (dev %d) \n", + (u32)ctp, (u32)stp, stp - dbdev_tab, (u32)dtp, + dtp - dbdev_tab); + printk(KERN_DEBUG "desc base %x, get %x, put %x, cur %x\n", + (u32)(ctp->chan_desc_base), (u32)(ctp->get_ptr), + (u32)(ctp->put_ptr), (u32)(ctp->cur_ptr)); + + printk(KERN_DEBUG "dbdma chan %x\n", (u32)cp); + printk(KERN_DEBUG "cfg %08x, desptr %08x, statptr %08x\n", + cp->ddma_cfg, cp->ddma_desptr, cp->ddma_statptr); + printk(KERN_DEBUG "dbell %08x, irq %08x, stat %08x, bytecnt %08x\n", + cp->ddma_dbell, cp->ddma_irq, cp->ddma_stat, + cp->ddma_bytecnt); + + /* Run through the descriptors */ dp = ctp->chan_desc_base; do { - printk("Dp[%d]= %08x, cmd0 %08x, cmd1 %08x\n", - i++, (u32)dp, dp->dscr_cmd0, dp->dscr_cmd1); - printk("src0 %08x, src1 %08x, dest0 %08x, dest1 %08x\n", - dp->dscr_source0, dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1); - printk("stat %08x, nxtptr %08x\n", - dp->dscr_stat, dp->dscr_nxtptr); + printk(KERN_DEBUG "Dp[%d]= %08x, cmd0 %08x, cmd1 %08x\n", + i++, (u32)dp, dp->dscr_cmd0, dp->dscr_cmd1); + printk(KERN_DEBUG "src0 %08x, src1 %08x, dest0 %08x, dest1 %08x\n", + dp->dscr_source0, dp->dscr_source1, + dp->dscr_dest0, dp->dscr_dest1); + printk(KERN_DEBUG "stat %08x, nxtptr %08x\n", + dp->dscr_stat, dp->dscr_nxtptr); dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); } while (dp != ctp->chan_desc_base); } @@ -938,32 +919,33 @@ au1xxx_dbdma_dump(u32 chanid) /* Put a descriptor into the DMA ring. * This updates the source/destination pointers and byte count. */ -u32 -au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr ) +u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr) { chan_tab_t *ctp; au1x_ddma_desc_t *dp; - u32 nbytes=0; + u32 nbytes = 0; - /* I guess we could check this to be within the - * range of the table...... - */ + /* + * I guess we could check this to be within the + * range of the table...... + */ ctp = *((chan_tab_t **)chanid); - /* We should have multiple callers for a particular channel, - * an interrupt doesn't affect this pointer nor the descriptor, - * so no locking should be needed. - */ + /* + * We should have multiple callers for a particular channel, + * an interrupt doesn't affect this pointer nor the descriptor, + * so no locking should be needed. + */ dp = ctp->put_ptr; - /* If the descriptor is valid, we are way ahead of the DMA - * engine, so just return an error condition. - */ + /* + * If the descriptor is valid, we are way ahead of the DMA + * engine, so just return an error condition. + */ if (dp->dscr_cmd0 & DSCR_CMD0_V) return 0; - /* Load up buffer addresses and byte count. - */ + /* Load up buffer addresses and byte count. */ dp->dscr_dest0 = dscr->dscr_dest0; dp->dscr_source0 = dscr->dscr_source0; dp->dscr_dest1 = dscr->dscr_dest1; @@ -975,14 +957,11 @@ au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr ) dp->dscr_cmd0 |= dscr->dscr_cmd0 | DSCR_CMD0_V; ctp->chan_ptr->ddma_dbell = 0; - /* Get next descriptor pointer. - */ + /* Get next descriptor pointer. */ ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); - /* return something not zero. - */ + /* Return something non-zero. */ return nbytes; } #endif /* defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) */ - diff --git a/arch/mips/au1000/common/dbg_io.c b/arch/mips/au1000/common/dbg_io.c index eae1bb2ca26e..af5be7df2f2a 100644 --- a/arch/mips/au1000/common/dbg_io.c +++ b/arch/mips/au1000/common/dbg_io.c @@ -1,3 +1,4 @@ +#include <linux/types.h> #include <asm/mach-au1x00/au1000.h> @@ -8,12 +9,6 @@ * uart to be used for debugging. */ #define DEBUG_BASE UART_DEBUG_BASE -/**/ - -/* we need uint32 uint8 */ -/* #include "types.h" */ -typedef unsigned char uint8; -typedef unsigned int uint32; #define UART16550_BAUD_2400 2400 #define UART16550_BAUD_4800 4800 @@ -51,17 +46,15 @@ typedef unsigned int uint32; #define UART_MOD_CNTRL 0x100 /* Module Control */ /* memory-mapped read/write of the port */ -#define UART16550_READ(y) (au_readl(DEBUG_BASE + y) & 0xff) -#define UART16550_WRITE(y, z) (au_writel(z&0xff, DEBUG_BASE + y)) +#define UART16550_READ(y) (au_readl(DEBUG_BASE + y) & 0xff) +#define UART16550_WRITE(y, z) (au_writel(z & 0xff, DEBUG_BASE + y)) extern unsigned long calc_clock(void); -void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop) +void debugInit(u32 baud, u8 data, u8 parity, u8 stop) { - - if (UART16550_READ(UART_MOD_CNTRL) != 0x3) { + if (UART16550_READ(UART_MOD_CNTRL) != 0x3) UART16550_WRITE(UART_MOD_CNTRL, 3); - } calc_clock(); /* disable interrupts */ @@ -69,7 +62,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop) /* set up baud rate */ { - uint32 divisor; + u32 divisor; /* set divisor */ divisor = get_au1x00_uart_baud_base() / baud; @@ -80,9 +73,9 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop) UART16550_WRITE(UART_LCR, (data | parity | stop)); } -static int remoteDebugInitialized = 0; +static int remoteDebugInitialized; -uint8 getDebugChar(void) +u8 getDebugChar(void) { if (!remoteDebugInitialized) { remoteDebugInitialized = 1; @@ -92,15 +85,13 @@ uint8 getDebugChar(void) UART16550_STOP_1BIT); } - while((UART16550_READ(UART_LSR) & 0x1) == 0); + while ((UART16550_READ(UART_LSR) & 0x1) == 0); return UART16550_READ(UART_RX); } -int putDebugChar(uint8 byte) +int putDebugChar(u8 byte) { -// int i; - if (!remoteDebugInitialized) { remoteDebugInitialized = 1; debugInit(UART16550_BAUD_115200, @@ -109,9 +100,8 @@ int putDebugChar(uint8 byte) UART16550_STOP_1BIT); } - while ((UART16550_READ(UART_LSR)&0x40) == 0); + while ((UART16550_READ(UART_LSR) & 0x40) == 0); UART16550_WRITE(UART_TX, byte); - //for (i=0;i<0xfff;i++); return 1; } diff --git a/arch/mips/au1000/common/dma.c b/arch/mips/au1000/common/dma.c index 95f69ea146e9..d6fbda232e6a 100644 --- a/arch/mips/au1000/common/dma.c +++ b/arch/mips/au1000/common/dma.c @@ -1,12 +1,11 @@ /* * * BRIEF MODULE DESCRIPTION - * A DMA channel allocator for Au1000. API is modeled loosely off of + * A DMA channel allocator for Au1x00. API is modeled loosely off of * linux/kernel/dma.c. * - * Copyright 2000 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * stevel@mvista.com or source@mvista.com + * Copyright 2000, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org) * * This program is free software; you can redistribute it and/or modify it @@ -39,7 +38,8 @@ #include <asm/mach-au1x00/au1000.h> #include <asm/mach-au1x00/au1000_dma.h> -#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1100) +#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || \ + defined(CONFIG_SOC_AU1100) /* * A note on resource allocation: * @@ -56,7 +56,6 @@ * returned from request_dma. */ - DEFINE_SPINLOCK(au1000_dma_spin_lock); struct dma_chan au1000_dma_table[NUM_AU1000_DMA_CHANNELS] = { @@ -71,7 +70,7 @@ struct dma_chan au1000_dma_table[NUM_AU1000_DMA_CHANNELS] = { }; EXPORT_SYMBOL(au1000_dma_table); -// Device FIFO addresses and default DMA modes +/* Device FIFO addresses and default DMA modes */ static const struct dma_dev { unsigned int fifo_addr; unsigned int dma_mode; @@ -80,8 +79,8 @@ static const struct dma_dev { {UART0_ADDR + UART_RX, 0}, {0, 0}, {0, 0}, - {AC97C_DATA, DMA_DW16 }, // coherent - {AC97C_DATA, DMA_DR | DMA_DW16 }, // coherent + {AC97C_DATA, DMA_DW16 }, /* coherent */ + {AC97C_DATA, DMA_DR | DMA_DW16 }, /* coherent */ {UART3_ADDR + UART_TX, DMA_DW8 | DMA_NC}, {UART3_ADDR + UART_RX, DMA_DR | DMA_DW8 | DMA_NC}, {USBD_EP0RD, DMA_DR | DMA_DW8 | DMA_NC}, @@ -101,10 +100,10 @@ int au1000_dma_read_proc(char *buf, char **start, off_t fpos, struct dma_chan *chan; for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++) { - if ((chan = get_dma_chan(i)) != NULL) { + chan = get_dma_chan(i); + if (chan != NULL) len += sprintf(buf + len, "%2d: %s\n", i, chan->dev_str); - } } if (fpos >= len) { @@ -113,18 +112,19 @@ int au1000_dma_read_proc(char *buf, char **start, off_t fpos, return 0; } *start = buf + fpos; - if ((len -= fpos) > length) + len -= fpos; + if (len > length) return length; *eof = 1; return len; } -// Device FIFO addresses and default DMA modes - 2nd bank +/* Device FIFO addresses and default DMA modes - 2nd bank */ static const struct dma_dev dma_dev_table_bank2[DMA_NUM_DEV_BANK2] = { - {SD0_XMIT_FIFO, DMA_DS | DMA_DW8}, // coherent - {SD0_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8}, // coherent - {SD1_XMIT_FIFO, DMA_DS | DMA_DW8}, // coherent - {SD1_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8} // coherent + { SD0_XMIT_FIFO, DMA_DS | DMA_DW8 }, /* coherent */ + { SD0_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8 }, /* coherent */ + { SD1_XMIT_FIFO, DMA_DS | DMA_DW8 }, /* coherent */ + { SD1_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8 } /* coherent */ }; void dump_au1000_dma_channel(unsigned int dmanr) @@ -150,7 +150,6 @@ void dump_au1000_dma_channel(unsigned int dmanr) au_readl(chan->io + DMA_BUFFER1_COUNT)); } - /* * Finds a free channel, and binds the requested device to it. * Returns the allocated channel number, or negative on error. @@ -169,14 +168,14 @@ int request_au1000_dma(int dev_id, const char *dev_str, if (dev_id < 0 || dev_id >= (DMA_NUM_DEV + DMA_NUM_DEV_BANK2)) return -EINVAL; #else - if (dev_id < 0 || dev_id >= DMA_NUM_DEV) + if (dev_id < 0 || dev_id >= DMA_NUM_DEV) return -EINVAL; #endif - for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++) { + for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++) if (au1000_dma_table[i].dev_id < 0) break; - } + if (i == NUM_AU1000_DMA_CHANNELS) return -ENODEV; @@ -185,15 +184,15 @@ int request_au1000_dma(int dev_id, const char *dev_str, if (dev_id >= DMA_NUM_DEV) { dev_id -= DMA_NUM_DEV; dev = &dma_dev_table_bank2[dev_id]; - } else { + } else dev = &dma_dev_table[dev_id]; - } if (irqhandler) { chan->irq = AU1000_DMA_INT_BASE + i; chan->irq_dev = irq_dev_id; - if ((ret = request_irq(chan->irq, irqhandler, irqflags, - dev_str, chan->irq_dev))) { + ret = request_irq(chan->irq, irqhandler, irqflags, dev_str, + chan->irq_dev); + if (ret) { chan->irq = 0; chan->irq_dev = NULL; return ret; @@ -203,7 +202,7 @@ int request_au1000_dma(int dev_id, const char *dev_str, chan->irq_dev = NULL; } - // fill it in + /* fill it in */ chan->io = DMA_CHANNEL_BASE + i * DMA_CHANNEL_LEN; chan->dev_id = dev_id; chan->dev_str = dev_str; @@ -220,8 +219,9 @@ EXPORT_SYMBOL(request_au1000_dma); void free_au1000_dma(unsigned int dmanr) { struct dma_chan *chan = get_dma_chan(dmanr); + if (!chan) { - printk("Trying to free DMA%d\n", dmanr); + printk(KERN_ERR "Error trying to free DMA%d\n", dmanr); return; } @@ -235,4 +235,4 @@ void free_au1000_dma(unsigned int dmanr) } EXPORT_SYMBOL(free_au1000_dma); -#endif // AU1000 AU1500 AU1100 +#endif /* AU1000 AU1500 AU1100 */ diff --git a/arch/mips/au1000/common/gpio.c b/arch/mips/au1000/common/gpio.c index 525452589971..b485d94ce8a5 100644 --- a/arch/mips/au1000/common/gpio.c +++ b/arch/mips/au1000/common/gpio.c @@ -69,7 +69,7 @@ static int au1xxx_gpio2_direction_output(unsigned gpio, int value) static int au1xxx_gpio1_read(unsigned gpio) { - return ((gpio1->pinstaterd >> gpio) & 0x01); + return (gpio1->pinstaterd >> gpio) & 0x01; } static void au1xxx_gpio1_write(unsigned gpio, int value) @@ -104,7 +104,6 @@ int au1xxx_gpio_get_value(unsigned gpio) else return au1xxx_gpio1_read(gpio); } - EXPORT_SYMBOL(au1xxx_gpio_get_value); void au1xxx_gpio_set_value(unsigned gpio, int value) @@ -118,7 +117,6 @@ void au1xxx_gpio_set_value(unsigned gpio, int value) else au1xxx_gpio1_write(gpio, value); } - EXPORT_SYMBOL(au1xxx_gpio_set_value); int au1xxx_gpio_direction_input(unsigned gpio) @@ -132,7 +130,6 @@ int au1xxx_gpio_direction_input(unsigned gpio) return au1xxx_gpio1_direction_input(gpio); } - EXPORT_SYMBOL(au1xxx_gpio_direction_input); int au1xxx_gpio_direction_output(unsigned gpio, int value) @@ -146,5 +143,4 @@ int au1xxx_gpio_direction_output(unsigned gpio, int value) return au1xxx_gpio1_direction_output(gpio, value); } - EXPORT_SYMBOL(au1xxx_gpio_direction_output); diff --git a/arch/mips/au1000/common/irq.c b/arch/mips/au1000/common/irq.c index f0626992fd75..40c6ceceb5f9 100644 --- a/arch/mips/au1000/common/irq.c +++ b/arch/mips/au1000/common/irq.c @@ -210,10 +210,8 @@ static inline void mask_and_ack_either_edge_irq(unsigned int irq_nr) au_sync(); } - static inline void mask_and_ack_level_irq(unsigned int irq_nr) { - local_disable_irq(irq_nr); au_sync(); #if defined(CONFIG_MIPS_PB1000) @@ -263,14 +261,14 @@ void restore_local_and_enable(int controller, unsigned long mask) unsigned long flags, new_mask; spin_lock_irqsave(&irq_lock, flags); - for (i = 0; i < 32; i++) { + for (i = 0; i < 32; i++) if (mask & (1 << i)) { if (controller) local_enable_irq(i + 32); else local_enable_irq(i); } - } + if (controller) new_mask = au_readl(IC1_MASKSET); else diff --git a/arch/mips/au1000/common/pci.c b/arch/mips/au1000/common/pci.c index 7e966b31e3e1..7866cf50cf99 100644 --- a/arch/mips/au1000/common/pci.c +++ b/arch/mips/au1000/common/pci.c @@ -2,9 +2,8 @@ * BRIEF MODULE DESCRIPTION * Alchemy/AMD Au1x00 PCI support. * - * Copyright 2001-2003, 2007 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com + * Copyright 2001-2003, 2007-2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> * * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) * @@ -86,9 +85,9 @@ static int __init au1x_pci_setup(void) u32 prid = read_c0_prid(); if ((prid & 0xFF000000) == 0x01000000 && prid < 0x01030202) { - au_writel((1 << 16) | au_readl(Au1500_PCI_CFG), - Au1500_PCI_CFG); - printk("Non-coherent PCI accesses enabled\n"); + au_writel((1 << 16) | au_readl(Au1500_PCI_CFG), + Au1500_PCI_CFG); + printk(KERN_INFO "Non-coherent PCI accesses enabled\n"); } } #endif diff --git a/arch/mips/au1000/common/platform.c b/arch/mips/au1000/common/platform.c index 31d2a2270878..8cae7753ef79 100644 --- a/arch/mips/au1000/common/platform.c +++ b/arch/mips/au1000/common/platform.c @@ -269,8 +269,8 @@ static struct platform_device au1x00_pcmcia_device = { #ifdef SMBUS_PSC_BASE static struct resource pbdb_smbus_resources[] = { { - .start = SMBUS_PSC_BASE, - .end = SMBUS_PSC_BASE + 0x24 - 1, + .start = CPHYSADDR(SMBUS_PSC_BASE), + .end = CPHYSADDR(SMBUS_PSC_BASE + 0xfffff), .flags = IORESOURCE_MEM, }, }; @@ -302,16 +302,17 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = { #endif }; -int __init au1xxx_platform_init(void) +static int __init au1xxx_platform_init(void) { unsigned int uartclk = get_au1x00_uart_baud_base() * 16; int i; /* Fill up uartclk. */ - for (i = 0; au1x00_uart_data[i].flags ; i++) + for (i = 0; au1x00_uart_data[i].flags; i++) au1x00_uart_data[i].uartclk = uartclk; - return platform_add_devices(au1xxx_platform_devices, ARRAY_SIZE(au1xxx_platform_devices)); + return platform_add_devices(au1xxx_platform_devices, + ARRAY_SIZE(au1xxx_platform_devices)); } arch_initcall(au1xxx_platform_init); diff --git a/arch/mips/au1000/common/power.c b/arch/mips/au1000/common/power.c index a8cd2c1b9e1b..2166b9e1e80c 100644 --- a/arch/mips/au1000/common/power.c +++ b/arch/mips/au1000/common/power.c @@ -1,10 +1,9 @@ /* * BRIEF MODULE DESCRIPTION - * Au1000 Power Management routines. + * Au1xx0 Power Management routines. * - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> * * Some of the routines are right out of init/main.c, whose * copyrights apply here. @@ -43,10 +42,10 @@ #ifdef CONFIG_PM #define DEBUG 1 -#ifdef DEBUG -# define DPRINTK(fmt, args...) printk("%s: " fmt, __func__, ## args) +#ifdef DEBUG +#define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __func__, ## args) #else -# define DPRINTK(fmt, args...) +#define DPRINTK(fmt, args...) #endif static void au1000_calibrate_delay(void); @@ -57,7 +56,8 @@ extern void local_enable_irq(unsigned int irq_nr); static DEFINE_SPINLOCK(pm_lock); -/* We need to save/restore a bunch of core registers that are +/* + * We need to save/restore a bunch of core registers that are * either volatile or reset to some state across a processor sleep. * If reading a register doesn't provide a proper result for a * later restore, we have to provide a function for loading that @@ -78,24 +78,25 @@ static unsigned int sleep_usbhost_enable; static unsigned int sleep_usbdev_enable; static unsigned int sleep_static_memctlr[4][3]; -/* Define this to cause the value you write to /proc/sys/pm/sleep to +/* + * Define this to cause the value you write to /proc/sys/pm/sleep to * set the TOY timer for the amount of time you want to sleep. * This is done mainly for testing, but may be useful in other cases. * The value is number of 32KHz ticks to sleep. */ #define SLEEP_TEST_TIMEOUT 1 -#ifdef SLEEP_TEST_TIMEOUT -static int sleep_ticks; +#ifdef SLEEP_TEST_TIMEOUT +static int sleep_ticks; void wakeup_counter0_set(int ticks); #endif -static void -save_core_regs(void) +static void save_core_regs(void) { extern void save_au1xxx_intctl(void); extern void pm_eth0_shutdown(void); - /* Do the serial ports.....these really should be a pm_* + /* + * Do the serial ports.....these really should be a pm_* * registered function by the driver......but of course the * standard serial driver doesn't understand our Au1xxx * unique registers. @@ -106,27 +107,24 @@ save_core_regs(void) sleep_uart0_clkdiv = au_readl(UART0_ADDR + UART_CLK); sleep_uart0_enable = au_readl(UART0_ADDR + UART_MOD_CNTRL); - /* Shutdown USB host/device. - */ + /* Shutdown USB host/device. */ sleep_usbhost_enable = au_readl(USB_HOST_CONFIG); - /* There appears to be some undocumented reset register.... - */ + /* There appears to be some undocumented reset register.... */ au_writel(0, 0xb0100004); au_sync(); au_writel(0, USB_HOST_CONFIG); au_sync(); sleep_usbdev_enable = au_readl(USBD_ENABLE); au_writel(0, USBD_ENABLE); au_sync(); - /* Save interrupt controller state. - */ + /* Save interrupt controller state. */ save_au1xxx_intctl(); - /* Clocks and PLLs. - */ + /* Clocks and PLLs. */ sleep_aux_pll_cntrl = au_readl(SYS_AUXPLL); - /* We don't really need to do this one, but unless we + /* + * We don't really need to do this one, but unless we * write it again it won't have a valid value if we * happen to read it. */ @@ -134,8 +132,7 @@ save_core_regs(void) sleep_pin_function = au_readl(SYS_PINFUNC); - /* Save the static memory controller configuration. - */ + /* Save the static memory controller configuration. */ sleep_static_memctlr[0][0] = au_readl(MEM_STCFG0); sleep_static_memctlr[0][1] = au_readl(MEM_STTIME0); sleep_static_memctlr[0][2] = au_readl(MEM_STADDR0); @@ -150,8 +147,7 @@ save_core_regs(void) sleep_static_memctlr[3][2] = au_readl(MEM_STADDR3); } -static void -restore_core_regs(void) +static void restore_core_regs(void) { extern void restore_au1xxx_intctl(void); extern void wakeup_counter0_adjust(void); @@ -160,8 +156,7 @@ restore_core_regs(void) au_writel(sleep_cpu_pll_cntrl, SYS_CPUPLL); au_sync(); au_writel(sleep_pin_function, SYS_PINFUNC); au_sync(); - /* Restore the static memory controller configuration. - */ + /* Restore the static memory controller configuration. */ au_writel(sleep_static_memctlr[0][0], MEM_STCFG0); au_writel(sleep_static_memctlr[0][1], MEM_STTIME0); au_writel(sleep_static_memctlr[0][2], MEM_STADDR0); @@ -175,7 +170,8 @@ restore_core_regs(void) au_writel(sleep_static_memctlr[3][1], MEM_STTIME3); au_writel(sleep_static_memctlr[3][2], MEM_STADDR3); - /* Enable the UART if it was enabled before sleep. + /* + * Enable the UART if it was enabled before sleep. * I guess I should define module control bits........ */ if (sleep_uart0_enable & 0x02) { @@ -202,7 +198,7 @@ void wakeup_from_suspend(void) int au_sleep(void) { unsigned long wakeup, flags; - extern void save_and_sleep(void); + extern void save_and_sleep(void); spin_lock_irqsave(&pm_lock, flags); @@ -210,23 +206,22 @@ int au_sleep(void) flush_cache_all(); - /** The code below is all system dependent and we should probably + /** + ** The code below is all system dependent and we should probably ** have a function call out of here to set this up. You need ** to configure the GPIO or timer interrupts that will bring ** you out of sleep. ** For testing, the TOY counter wakeup is useful. **/ - #if 0 au_writel(au_readl(SYS_PINSTATERD) & ~(1 << 11), SYS_PINSTATERD); - /* gpio 6 can cause a wake up event */ + /* GPIO 6 can cause a wake up event */ wakeup = au_readl(SYS_WAKEMSK); wakeup &= ~(1 << 8); /* turn off match20 wakeup */ - wakeup |= 1 << 6; /* turn on gpio 6 wakeup */ + wakeup |= 1 << 6; /* turn on GPIO 6 wakeup */ #else - /* For testing, allow match20 to wake us up. - */ + /* For testing, allow match20 to wake us up. */ #ifdef SLEEP_TEST_TIMEOUT wakeup_counter0_set(sleep_ticks); #endif @@ -240,7 +235,8 @@ int au_sleep(void) save_and_sleep(); - /* after a wakeup, the cpu vectors back to 0x1fc00000 so + /* + * After a wakeup, the cpu vectors back to 0x1fc00000, so * it's up to the boot code to get us back here. */ restore_core_regs(); @@ -248,24 +244,22 @@ int au_sleep(void) return 0; } -static int pm_do_sleep(ctl_table * ctl, int write, struct file *file, - void __user *buffer, size_t * len, loff_t *ppos) +static int pm_do_sleep(ctl_table *ctl, int write, struct file *file, + void __user *buffer, size_t *len, loff_t *ppos) { #ifdef SLEEP_TEST_TIMEOUT #define TMPBUFLEN2 16 char buf[TMPBUFLEN2], *p; #endif - if (!write) { + if (!write) *len = 0; - } else { + else { #ifdef SLEEP_TEST_TIMEOUT - if (*len > TMPBUFLEN2 - 1) { + if (*len > TMPBUFLEN2 - 1) return -EFAULT; - } - if (copy_from_user(buf, buffer, *len)) { + if (copy_from_user(buf, buffer, *len)) return -EFAULT; - } buf[*len] = 0; p = buf; sleep_ticks = simple_strtoul(p, &p, 0); @@ -276,8 +270,8 @@ static int pm_do_sleep(ctl_table * ctl, int write, struct file *file, return 0; } -static int pm_do_freq(ctl_table * ctl, int write, struct file *file, - void __user *buffer, size_t * len, loff_t *ppos) +static int pm_do_freq(ctl_table *ctl, int write, struct file *file, + void __user *buffer, size_t *len, loff_t *ppos) { int retval = 0, i; unsigned long val, pll; @@ -285,14 +279,14 @@ static int pm_do_freq(ctl_table * ctl, int write, struct file *file, #define MAX_CPU_FREQ 396 char buf[TMPBUFLEN], *p; unsigned long flags, intc0_mask, intc1_mask; - unsigned long old_baud_base, old_cpu_freq, baud_rate, old_clk, - old_refresh; + unsigned long old_baud_base, old_cpu_freq, old_clk, old_refresh; unsigned long new_baud_base, new_cpu_freq, new_clk, new_refresh; + unsigned long baud_rate; spin_lock_irqsave(&pm_lock, flags); - if (!write) { + if (!write) *len = 0; - } else { + else { /* Parse the new frequency */ if (*len > TMPBUFLEN - 1) { spin_unlock_irqrestore(&pm_lock, flags); @@ -312,7 +306,7 @@ static int pm_do_freq(ctl_table * ctl, int write, struct file *file, pll = val / 12; if ((pll > 33) || (pll < 7)) { /* 396 MHz max, 84 MHz min */ - /* revisit this for higher speed cpus */ + /* Revisit this for higher speed CPUs */ spin_unlock_irqrestore(&pm_lock, flags); return -EFAULT; } @@ -321,30 +315,28 @@ static int pm_do_freq(ctl_table * ctl, int write, struct file *file, old_cpu_freq = get_au1x00_speed(); new_cpu_freq = pll * 12 * 1000000; - new_baud_base = (new_cpu_freq / (2 * ((int)(au_readl(SYS_POWERCTRL)&0x03) + 2) * 16)); + new_baud_base = (new_cpu_freq / (2 * ((int)(au_readl(SYS_POWERCTRL) + & 0x03) + 2) * 16)); set_au1x00_speed(new_cpu_freq); set_au1x00_uart_baud_base(new_baud_base); old_refresh = au_readl(MEM_SDREFCFG) & 0x1ffffff; - new_refresh = - ((old_refresh * new_cpu_freq) / - old_cpu_freq) | (au_readl(MEM_SDREFCFG) & ~0x1ffffff); + new_refresh = ((old_refresh * new_cpu_freq) / old_cpu_freq) | + (au_readl(MEM_SDREFCFG) & ~0x1ffffff); au_writel(pll, SYS_CPUPLL); au_sync_delay(1); au_writel(new_refresh, MEM_SDREFCFG); au_sync_delay(1); - for (i = 0; i < 4; i++) { - if (au_readl - (UART_BASE + UART_MOD_CNTRL + - i * 0x00100000) == 3) { - old_clk = - au_readl(UART_BASE + UART_CLK + - i * 0x00100000); - // baud_rate = baud_base/clk + for (i = 0; i < 4; i++) + if (au_readl(UART_BASE + UART_MOD_CNTRL + + i * 0x00100000) == 3) { + old_clk = au_readl(UART_BASE + UART_CLK + + i * 0x00100000); baud_rate = old_baud_base / old_clk; - /* we won't get an exact baud rate and the error + /* + * We won't get an exact baud rate and the error * could be significant enough that our new * calculation will result in a clock that will * give us a baud rate that's too far off from @@ -359,18 +351,14 @@ static int pm_do_freq(ctl_table * ctl, int write, struct file *file, else if (baud_rate > 17000) baud_rate = 19200; else - (baud_rate = 9600); - // new_clk = new_baud_base/baud_rate + baud_rate = 9600; new_clk = new_baud_base / baud_rate; - au_writel(new_clk, - UART_BASE + UART_CLK + - i * 0x00100000); + au_writel(new_clk, UART_BASE + UART_CLK + + i * 0x00100000); au_sync_delay(10); } - } } - /* * We don't want _any_ interrupts other than match20. Otherwise our * au1000_calibrate_delay() calculation will be off, potentially a lot. @@ -428,14 +416,15 @@ static int __init pm_init(void) __initcall(pm_init); - /* * This is right out of init/main.c */ -/* This is the number of bits of precision for the loops_per_jiffy. Each - bit takes on average 1.5/HZ seconds. This (like the original) is a little - better than 1% */ +/* + * This is the number of bits of precision for the loops_per_jiffy. + * Each bit takes on average 1.5/HZ seconds. This (like the original) + * is a little better than 1%. + */ #define LPS_PREC 8 static void au1000_calibrate_delay(void) @@ -443,14 +432,14 @@ static void au1000_calibrate_delay(void) unsigned long ticks, loopbit; int lps_precision = LPS_PREC; - loops_per_jiffy = (1 << 12); + loops_per_jiffy = 1 << 12; while (loops_per_jiffy <<= 1) { - /* wait for "start of" clock tick */ + /* Wait for "start of" clock tick */ ticks = jiffies; while (ticks == jiffies) /* nothing */ ; - /* Go .. */ + /* Go ... */ ticks = jiffies; __delay(loops_per_jiffy); ticks = jiffies - ticks; @@ -458,8 +447,10 @@ static void au1000_calibrate_delay(void) break; } -/* Do a binary approximation to get loops_per_jiffy set to equal one clock - (up to lps_precision bits) */ + /* + * Do a binary approximation to get loops_per_jiffy set to be equal + * one clock (up to lps_precision bits) + */ loops_per_jiffy >>= 1; loopbit = loops_per_jiffy; while (lps_precision-- && (loopbit >>= 1)) { @@ -472,4 +463,4 @@ static void au1000_calibrate_delay(void) loops_per_jiffy &= ~loopbit; } } -#endif /* CONFIG_PM */ +#endif /* CONFIG_PM */ diff --git a/arch/mips/au1000/common/prom.c b/arch/mips/au1000/common/prom.c index f10af829e4ec..18b310b475ca 100644 --- a/arch/mips/au1000/common/prom.c +++ b/arch/mips/au1000/common/prom.c @@ -3,9 +3,8 @@ * BRIEF MODULE DESCRIPTION * PROM library initialisation code, supports YAMON and U-Boot. * - * Copyright 2000, 2001, 2006 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com + * Copyright 2000-2001, 2006, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> * * This file was derived from Carsten Langgaard's * arch/mips/mips-boards/xx files. @@ -57,7 +56,7 @@ void prom_init_cmdline(void) actr = 1; /* Always ignore argv[0] */ cp = &(arcs_cmdline[0]); - while(actr < prom_argc) { + while (actr < prom_argc) { strcpy(cp, prom_argv[actr]); cp += strlen(prom_argv[actr]); *cp++ = ' '; @@ -84,10 +83,8 @@ char *prom_getenv(char *envname) if (yamon) { if (strcmp(envname, *env++) == 0) return *env; - } else { - if (strncmp(envname, *env, i) == 0 && (*env)[i] == '=') - return *env + i + 1; - } + } else if (strncmp(envname, *env, i) == 0 && (*env)[i] == '=') + return *env + i + 1; env++; } @@ -110,13 +107,13 @@ static inline void str2eaddr(unsigned char *ea, unsigned char *str) { int i; - for(i = 0; i < 6; i++) { + for (i = 0; i < 6; i++) { unsigned char num; - if((*str == '.') || (*str == ':')) + if ((*str == '.') || (*str == ':')) str++; - num = str2hexnum(*str++) << 4; - num |= (str2hexnum(*str++)); + num = str2hexnum(*str++) << 4; + num |= str2hexnum(*str++); ea[i] = num; } } diff --git a/arch/mips/au1000/common/puts.c b/arch/mips/au1000/common/puts.c index e34c67e89293..55bbe24d45b6 100644 --- a/arch/mips/au1000/common/puts.c +++ b/arch/mips/au1000/common/puts.c @@ -1,11 +1,10 @@ /* * * BRIEF MODULE DESCRIPTION - * Low level uart routines to directly access a 16550 uart. + * Low level UART routines to directly access Alchemy UART. * - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -40,12 +39,12 @@ static volatile unsigned long * const com1 = (unsigned long *)SERIAL_BASE; - #ifdef SLOW_DOWN static inline void slow_down(void) { - int k; - for (k=0; k<10000; k++); + int k; + + for (k = 0; k < 10000; k++); } #else #define slow_down() @@ -54,16 +53,16 @@ static inline void slow_down(void) void prom_putchar(const unsigned char c) { - unsigned char ch; - int i = 0; + unsigned char ch; + int i = 0; + + do { + ch = com1[SER_CMD]; + slow_down(); + i++; + if (i > TIMEOUT) + break; + } while (0 == (ch & TX_BUSY)); - do { - ch = com1[SER_CMD]; - slow_down(); - i++; - if (i>TIMEOUT) { - break; - } - } while (0 == (ch & TX_BUSY)); - com1[SER_DATA] = c; + com1[SER_DATA] = c; } diff --git a/arch/mips/au1000/common/reset.c b/arch/mips/au1000/common/reset.c index 60cec537c745..d555429c8d6f 100644 --- a/arch/mips/au1000/common/reset.c +++ b/arch/mips/au1000/common/reset.c @@ -1,11 +1,10 @@ /* * * BRIEF MODULE DESCRIPTION - * Au1000 reset routines. + * Au1xx0 reset routines. * - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com + * Copyright 2001, 2006, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -28,10 +27,11 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include <asm/cacheflush.h> + #include <asm/mach-au1x00/au1000.h> extern int au_sleep(void); -extern void (*flush_cache_all)(void); void au1000_restart(char *command) { @@ -40,8 +40,8 @@ void au1000_restart(char *command) u32 prid = read_c0_prid(); printk(KERN_NOTICE "\n** Resetting Integrated Peripherals\n"); - switch (prid & 0xFF000000) - { + + switch (prid & 0xFF000000) { case 0x00000000: /* Au1000 */ au_writel(0x02, 0xb0000010); /* ac97_enable */ au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */ @@ -138,9 +138,6 @@ void au1000_restart(char *command) au_writel(0x00, 0xb1900064); /* sys_auxpll */ au_writel(0x00, 0xb1900100); /* sys_pininputen */ break; - - default: - break; } set_c0_status(ST0_BEV | ST0_ERL); @@ -158,25 +155,25 @@ void au1000_restart(char *command) void au1000_halt(void) { #if defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550) - /* power off system */ - printk("\n** Powering off...\n"); - au_writew(au_readw(0xAF00001C) | (3<<14), 0xAF00001C); + /* Power off system */ + printk(KERN_NOTICE "\n** Powering off...\n"); + au_writew(au_readw(0xAF00001C) | (3 << 14), 0xAF00001C); au_sync(); - while(1); /* should not get here */ + while (1); /* should not get here */ #else printk(KERN_NOTICE "\n** You can safely turn off the power\n"); #ifdef CONFIG_MIPS_MIRAGE au_writel((1 << 26) | (1 << 10), GPIO2_OUTPUT); #endif #ifdef CONFIG_MIPS_DB1200 - au_writew(au_readw(0xB980001C) | (1<<14), 0xB980001C); + au_writew(au_readw(0xB980001C) | (1 << 14), 0xB980001C); #endif #ifdef CONFIG_PM au_sleep(); - /* should not get here */ - printk(KERN_ERR "Unable to put cpu in sleep mode\n"); - while(1); + /* Should not get here */ + printk(KERN_ERR "Unable to put CPU in sleep mode\n"); + while (1); #else while (1) __asm__(".set\tmips3\n\t" diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c index 0e86f7a6b4a7..1ac6b06f42a3 100644 --- a/arch/mips/au1000/common/setup.c +++ b/arch/mips/au1000/common/setup.c @@ -1,7 +1,6 @@ /* - * Copyright 2000 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com + * Copyright 2000, 2007-2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com * * Updates to 2.6, Pete Popov, Embedded Alley Solutions, Inc. * @@ -48,7 +47,7 @@ void __init plat_mem_setup(void) { struct cpu_spec *sp; char *argptr; - unsigned long prid, cpufreq, bclk = 1; + unsigned long prid, cpufreq, bclk; set_cpuspec(); sp = cur_cpu_spec[0]; @@ -66,42 +65,39 @@ void __init plat_mem_setup(void) cpufreq = (au_readl(SYS_CPUPLL) & 0x3F) * 12; printk(KERN_INFO "(PRID %08lx) @ %ld MHz\n", prid, cpufreq); - bclk = sp->cpu_bclk; - if (bclk) - { + if (sp->cpu_bclk) { /* Enable BCLK switching */ - bclk = au_readl(0xB190003C); - au_writel(bclk | 0x60, 0xB190003C); - printk("BCLK switching enabled!\n"); + bclk = au_readl(SYS_POWERCTRL); + au_writel(bclk | 0x60, SYS_POWERCTRL); + printk(KERN_INFO "BCLK switching enabled!\n"); } - if (sp->cpu_od) { - /* Various early Au1000 Errata corrected by this */ - set_c0_config(1<<19); /* Set Config[OD] */ - } - else { + if (sp->cpu_od) + /* Various early Au1xx0 errata corrected by this */ + set_c0_config(1 << 19); /* Set Config[OD] */ + else /* Clear to obtain best system bus performance */ - clear_c0_config(1<<19); /* Clear Config[OD] */ - } + clear_c0_config(1 << 19); /* Clear Config[OD] */ argptr = prom_getcmdline(); #ifdef CONFIG_SERIAL_8250_CONSOLE - if ((argptr = strstr(argptr, "console=")) == NULL) { + argptr = strstr(argptr, "console="); + if (argptr == NULL) { argptr = prom_getcmdline(); strcat(argptr, " console=ttyS0,115200"); } #endif #ifdef CONFIG_FB_AU1100 - if ((argptr = strstr(argptr, "video=")) == NULL) { - argptr = prom_getcmdline(); - /* default panel */ - /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/ - } + argptr = strstr(argptr, "video="); + if (argptr == NULL) { + argptr = prom_getcmdline(); + /* default panel */ + /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/ + } #endif - #if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000) /* au1000 does not support vra, au1500 and au1100 do */ strcat(argptr, " au1000_audio=vra"); @@ -129,7 +125,7 @@ void __init plat_mem_setup(void) /* This routine should be valid for all Au1x based boards */ phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size) { - /* Don't fixup 36 bit addresses */ + /* Don't fixup 36-bit addresses */ if ((phys_addr >> 32) != 0) return phys_addr; @@ -145,17 +141,17 @@ phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size) } #endif - /* All Au1x SOCs have a pcmcia controller */ - /* We setup our 32 bit pseudo addresses to be equal to the - * 36 bit addr >> 4, to make it easier to check the address + /* + * All Au1xx0 SOCs have a PCMCIA controller. + * We setup our 32-bit pseudo addresses to be equal to the + * 36-bit addr >> 4, to make it easier to check the address * and fix it. - * The Au1x socket 0 phys attribute address is 0xF 4000 0000. + * The PCMCIA socket 0 physical attribute address is 0xF 4000 0000. * The pseudo address we use is 0xF400 0000. Any address over - * 0xF400 0000 is a pcmcia pseudo address. + * 0xF400 0000 is a PCMCIA pseudo address. */ - if ((phys_addr >= 0xF4000000) && (phys_addr < 0xFFFFFFFF)) { + if ((phys_addr >= 0xF4000000) && (phys_addr < 0xFFFFFFFF)) return (phys_t)(phys_addr << 4); - } /* default nop */ return phys_addr; diff --git a/arch/mips/au1000/common/time.c b/arch/mips/au1000/common/time.c index bdb6d73b26fb..563d9390a872 100644 --- a/arch/mips/au1000/common/time.c +++ b/arch/mips/au1000/common/time.c @@ -25,11 +25,9 @@ * * Setting up the clock on the MIPS boards. * - * Update. Always configure the kernel with CONFIG_NEW_TIME_C. This - * will use the user interface gettimeofday() functions from the - * arch/mips/kernel/time.c, and we provide the clock interrupt processing - * and the timer offset compute functions. If CONFIG_PM is selected, - * we also ensure the 32KHz timer is available. -- Dan + * We provide the clock interrupt processing and the timer offset compute + * functions. If CONFIG_PM is selected, we also ensure the 32KHz timer is + * available. -- Dan */ #include <linux/types.h> @@ -47,8 +45,7 @@ extern int allow_au1k_wait; /* default off for CP0 Counter */ #if HZ < 100 || HZ > 1000 #error "unsupported HZ value! Must be in [100,1000]" #endif -#define MATCH20_INC (328*100/HZ) /* magic number 328 is for HZ=100... */ -extern void startup_match20_interrupt(irq_handler_t handler); +#define MATCH20_INC (328 * 100 / HZ) /* magic number 328 is for HZ=100... */ static unsigned long last_pc0, last_match20; #endif @@ -61,7 +58,7 @@ static irqreturn_t counter0_irq(int irq, void *dev_id) { unsigned long pc0; int time_elapsed; - static int jiffie_drift = 0; + static int jiffie_drift; if (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20) { /* should never happen! */ @@ -70,13 +67,11 @@ static irqreturn_t counter0_irq(int irq, void *dev_id) } pc0 = au_readl(SYS_TOYREAD); - if (pc0 < last_match20) { + if (pc0 < last_match20) /* counter overflowed */ time_elapsed = (0xffffffff - last_match20) + pc0; - } - else { + else time_elapsed = pc0 - last_match20; - } while (time_elapsed > 0) { do_timer(1); @@ -92,8 +87,9 @@ static irqreturn_t counter0_irq(int irq, void *dev_id) au_writel(last_match20 + MATCH20_INC, SYS_TOYMATCH2); au_sync(); - /* our counter ticks at 10.009765625 ms/tick, we we're running - * almost 10uS too slow per tick. + /* + * Our counter ticks at 10.009765625 ms/tick, we we're running + * almost 10 uS too slow per tick. */ if (jiffie_drift >= 999) { @@ -117,20 +113,17 @@ struct irqaction counter0_action = { /* When we wakeup from sleep, we have to "catch up" on all of the * timer ticks we have missed. */ -void -wakeup_counter0_adjust(void) +void wakeup_counter0_adjust(void) { unsigned long pc0; int time_elapsed; pc0 = au_readl(SYS_TOYREAD); - if (pc0 < last_match20) { + if (pc0 < last_match20) /* counter overflowed */ time_elapsed = (0xffffffff - last_match20) + pc0; - } - else { + else time_elapsed = pc0 - last_match20; - } while (time_elapsed > 0) { time_elapsed -= MATCH20_INC; @@ -143,10 +136,8 @@ wakeup_counter0_adjust(void) } -/* This is just for debugging to set the timer for a sleep delay. -*/ -void -wakeup_counter0_set(int ticks) +/* This is just for debugging to set the timer for a sleep delay. */ +void wakeup_counter0_set(int ticks) { unsigned long pc0; @@ -157,21 +148,22 @@ wakeup_counter0_set(int ticks) } #endif -/* I haven't found anyone that doesn't use a 12 MHz source clock, +/* + * I haven't found anyone that doesn't use a 12 MHz source clock, * but just in case..... */ #define AU1000_SRC_CLK 12000000 /* * We read the real processor speed from the PLL. This is important - * because it is more accurate than computing it from the 32KHz + * because it is more accurate than computing it from the 32 KHz * counter, if it exists. If we don't have an accurate processor * speed, all of the peripherals that derive their clocks based on * this advertised speed will introduce error and sometimes not work * properly. This function is futher convoluted to still allow configurations * to do that in case they have really, really old silicon with a - * write-only PLL register, that we need the 32KHz when power management - * "wait" is enabled, and we need to detect if the 32KHz isn't present + * write-only PLL register, that we need the 32 KHz when power management + * "wait" is enabled, and we need to detect if the 32 KHz isn't present * but requested......got it? :-) -- Dan */ unsigned long calc_clock(void) @@ -182,8 +174,7 @@ unsigned long calc_clock(void) spin_lock_irqsave(&time_lock, flags); - /* Power management cares if we don't have a 32KHz counter. - */ + /* Power management cares if we don't have a 32 KHz counter. */ no_au1xxx_32khz = 0; counter = au_readl(SYS_COUNTER_CNTRL); if (counter & SYS_CNTRL_E0) { @@ -193,7 +184,7 @@ unsigned long calc_clock(void) while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S); /* RTC now ticks at 32.768/16 kHz */ - au_writel(trim_divide-1, SYS_RTCTRIM); + au_writel(trim_divide - 1, SYS_RTCTRIM); while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S); while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S); @@ -215,9 +206,11 @@ unsigned long calc_clock(void) #endif else cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * AU1000_SRC_CLK; + /* On Alchemy CPU:counter ratio is 1:1 */ mips_hpt_frequency = cpu_speed; - // Equation: Baudrate = CPU / (SD * 2 * CLKDIV * 16) - set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL)&0x03) + 2) * 16)); + /* Equation: Baudrate = CPU / (SD * 2 * CLKDIV * 16) */ + set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL) + & 0x03) + 2) * 16)); spin_unlock_irqrestore(&time_lock, flags); return cpu_speed; } @@ -228,10 +221,10 @@ void __init plat_time_init(void) est_freq += 5000; /* round */ est_freq -= est_freq%10000; - printk("CPU frequency %d.%02d MHz\n", est_freq/1000000, - (est_freq%1000000)*100/1000000); - set_au1x00_speed(est_freq); - set_au1x00_lcd_clock(); // program the LCD clock + printk(KERN_INFO "CPU frequency %u.%02u MHz\n", + est_freq / 1000000, ((est_freq % 1000000) * 100) / 1000000); + set_au1x00_speed(est_freq); + set_au1x00_lcd_clock(); /* program the LCD clock */ #ifdef CONFIG_PM /* @@ -243,30 +236,29 @@ void __init plat_time_init(void) * counter 0 interrupt as a special irq and it doesn't show * up under /proc/interrupts. * - * Check to ensure we really have a 32KHz oscillator before + * Check to ensure we really have a 32 KHz oscillator before * we do this. */ if (no_au1xxx_32khz) - printk("WARNING: no 32KHz clock found.\n"); + printk(KERN_WARNING "WARNING: no 32KHz clock found.\n"); else { while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C0S); au_writel(0, SYS_TOYWRITE); while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C0S); - au_writel(au_readl(SYS_WAKEMSK) | (1<<8), SYS_WAKEMSK); + au_writel(au_readl(SYS_WAKEMSK) | (1 << 8), SYS_WAKEMSK); au_writel(~0, SYS_WAKESRC); au_sync(); while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20); - /* setup match20 to interrupt once every HZ */ + /* Setup match20 to interrupt once every HZ */ last_pc0 = last_match20 = au_readl(SYS_TOYREAD); au_writel(last_match20 + MATCH20_INC, SYS_TOYMATCH2); au_sync(); while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20); setup_irq(AU1000_TOY_MATCH2_INT, &counter0_action); - /* We can use the real 'wait' instruction. - */ + /* We can use the real 'wait' instruction. */ allow_au1k_wait = 1; } diff --git a/arch/mips/au1000/db1x00/Makefile b/arch/mips/au1000/db1x00/Makefile index 51d62bd5d900..274db3b55d82 100644 --- a/arch/mips/au1000/db1x00/Makefile +++ b/arch/mips/au1000/db1x00/Makefile @@ -1,8 +1,8 @@ # -# Copyright 2000 MontaVista Software Inc. -# Author: MontaVista Software, Inc. -# ppopov@mvista.com or source@mvista.com +# Copyright 2000, 2008 MontaVista Software Inc. +# Author: MontaVista Software, Inc. <source@mvista.com> +# +# Makefile for the Alchemy Semiconductor DBAu1xx0 boards. # -# Makefile for the Alchemy Semiconductor Db1x00 board. lib-y := init.o board_setup.o irqmap.o diff --git a/arch/mips/au1000/db1x00/board_setup.c b/arch/mips/au1000/db1x00/board_setup.c index b7dcbad5c586..9e5ccbbfcedd 100644 --- a/arch/mips/au1000/db1x00/board_setup.c +++ b/arch/mips/au1000/db1x00/board_setup.c @@ -3,9 +3,8 @@ * BRIEF MODULE DESCRIPTION * Alchemy Db1x00 board setup. * - * Copyright 2000 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com + * Copyright 2000, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -37,49 +36,49 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; void board_reset(void) { - /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */ + /* Hit BCSR.SW_RESET[RESET] */ bcsr->swreset = 0x0000; } void __init board_setup(void) { - u32 pin_func; + u32 pin_func = 0; - pin_func = 0; - /* not valid for 1550 */ - -#if defined(CONFIG_IRDA) && (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100)) - /* set IRFIRSEL instead of GPIO15 */ - pin_func = au_readl(SYS_PINFUNC) | (u32)((1<<8)); + /* Not valid for Au1550 */ +#if defined(CONFIG_IRDA) && \ + (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100)) + /* Set IRFIRSEL instead of GPIO15 */ + pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF; au_writel(pin_func, SYS_PINFUNC); - /* power off until the driver is in use */ + /* Power off until the driver is in use */ bcsr->resets &= ~BCSR_RESETS_IRDA_MODE_MASK; - bcsr->resets |= BCSR_RESETS_IRDA_MODE_OFF; + bcsr->resets |= BCSR_RESETS_IRDA_MODE_OFF; au_sync(); #endif bcsr->pcmcia = 0x0000; /* turn off PCMCIA power */ #ifdef CONFIG_MIPS_MIRAGE - /* enable GPIO[31:0] inputs */ + /* Enable GPIO[31:0] inputs */ au_writel(0, SYS_PININPUTEN); - /* GPIO[20] is output, tristate the other input primary GPIO's */ - au_writel((u32)(~(1<<20)), SYS_TRIOUTCLR); + /* GPIO[20] is output, tristate the other input primary GPIOs */ + au_writel(~(1 << 20), SYS_TRIOUTCLR); - /* set GPIO[210:208] instead of SSI_0 */ - pin_func = au_readl(SYS_PINFUNC) | (u32)(1); + /* Set GPIO[210:208] instead of SSI_0 */ + pin_func = au_readl(SYS_PINFUNC) | SYS_PF_S0; - /* set GPIO[215:211] for LED's */ - pin_func |= (u32)((5<<2)); + /* Set GPIO[215:211] for LEDs */ + pin_func |= 5 << 2; - /* set GPIO[214:213] for more LED's */ - pin_func |= (u32)((5<<12)); + /* Set GPIO[214:213] for more LEDs */ + pin_func |= 5 << 12; - /* set GPIO[207:200] instead of PCMCIA/LCD */ - pin_func |= (u32)((3<<17)); + /* Set GPIO[207:200] instead of PCMCIA/LCD */ + pin_func |= SYS_PF_LCD | SYS_PF_PC; au_writel(pin_func, SYS_PINFUNC); - /* Enable speaker amplifier. This should + /* + * Enable speaker amplifier. This should * be part of the audio driver. */ au_writel(au_readl(GPIO2_DIR) | 0x200, GPIO2_DIR); @@ -89,21 +88,21 @@ void __init board_setup(void) au_sync(); #ifdef CONFIG_MIPS_DB1000 - printk("AMD Alchemy Au1000/Db1000 Board\n"); + printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n"); #endif #ifdef CONFIG_MIPS_DB1500 - printk("AMD Alchemy Au1500/Db1500 Board\n"); + printk(KERN_INFO "AMD Alchemy Au1500/Db1500 Board\n"); #endif #ifdef CONFIG_MIPS_DB1100 - printk("AMD Alchemy Au1100/Db1100 Board\n"); + printk(KERN_INFO "AMD Alchemy Au1100/Db1100 Board\n"); #endif #ifdef CONFIG_MIPS_BOSPORUS - printk("AMD Alchemy Bosporus Board\n"); + printk(KERN_INFO "AMD Alchemy Bosporus Board\n"); #endif #ifdef CONFIG_MIPS_MIRAGE - printk("AMD Alchemy Mirage Board\n"); + printk(KERN_INFO "AMD Alchemy Mirage Board\n"); #endif #ifdef CONFIG_MIPS_DB1550 - printk("AMD Alchemy Au1550/Db1550 Board\n"); + printk(KERN_INFO "AMD Alchemy Au1550/Db1550 Board\n"); #endif } diff --git a/arch/mips/au1000/db1x00/init.c b/arch/mips/au1000/db1x00/init.c index d3b967caf70c..5ebe0de5e459 100644 --- a/arch/mips/au1000/db1x00/init.c +++ b/arch/mips/au1000/db1x00/init.c @@ -2,9 +2,8 @@ * BRIEF MODULE DESCRIPTION * PB1000 board setup * - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -49,8 +48,8 @@ void __init prom_init(void) unsigned long memsize; prom_argc = fw_arg0; - prom_argv = (char **) fw_arg1; - prom_envp = (char **) fw_arg2; + prom_argv = (char **)fw_arg1; + prom_envp = (char **)fw_arg2; prom_init_cmdline(); @@ -58,6 +57,6 @@ void __init prom_init(void) if (!memsize_str) memsize = 0x04000000; else - memsize = simple_strtol(memsize_str, NULL, 0); + memsize = strict_strtol(memsize_str, 0, NULL); add_memory_region(0, memsize, BOOT_MEM_RAM); } diff --git a/arch/mips/au1000/db1x00/irqmap.c b/arch/mips/au1000/db1x00/irqmap.c index eaa50c7b6341..94c090e8bf7a 100644 --- a/arch/mips/au1000/db1x00/irqmap.c +++ b/arch/mips/au1000/db1x00/irqmap.c @@ -32,32 +32,32 @@ #ifdef CONFIG_MIPS_DB1500 char irq_tab_alchemy[][5] __initdata = { - [12] = { -1, INTA, INTX, INTX, INTX}, /* IDSEL 12 - HPT371 */ - [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */ + [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT371 */ + [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */ }; #endif #ifdef CONFIG_MIPS_BOSPORUS char irq_tab_alchemy[][5] __initdata = { - [11] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 11 - miniPCI */ - [12] = { -1, INTA, INTX, INTX, INTX}, /* IDSEL 12 - SN1741 */ - [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */ + [11] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 11 - miniPCI */ + [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - SN1741 */ + [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */ }; #endif #ifdef CONFIG_MIPS_MIRAGE char irq_tab_alchemy[][5] __initdata = { - [11] = { -1, INTD, INTX, INTX, INTX}, /* IDSEL 11 - SMI VGX */ - [12] = { -1, INTX, INTX, INTC, INTX}, /* IDSEL 12 - PNX1300 */ - [13] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 13 - miniPCI */ + [11] = { -1, INTD, INTX, INTX, INTX }, /* IDSEL 11 - SMI VGX */ + [12] = { -1, INTX, INTX, INTC, INTX }, /* IDSEL 12 - PNX1300 */ + [13] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 13 - miniPCI */ }; #endif #ifdef CONFIG_MIPS_DB1550 char irq_tab_alchemy[][5] __initdata = { - [11] = { -1, INTC, INTX, INTX, INTX}, /* IDSEL 11 - on-board HPT371 */ - [12] = { -1, INTB, INTC, INTD, INTA}, /* IDSEL 12 - PCI slot 2 (left) */ - [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot 1 (right) */ + [11] = { -1, INTC, INTX, INTX, INTX }, /* IDSEL 11 - on-board HPT371 */ + [12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */ + [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */ }; #endif diff --git a/arch/mips/au1000/mtx-1/Makefile b/arch/mips/au1000/mtx-1/Makefile index 85a90941de4f..7c67b3d33bec 100644 --- a/arch/mips/au1000/mtx-1/Makefile +++ b/arch/mips/au1000/mtx-1/Makefile @@ -1,7 +1,6 @@ # # Copyright 2003 MontaVista Software Inc. -# Author: MontaVista Software, Inc. -# ppopov@mvista.com or source@mvista.com +# Author: MontaVista Software, Inc. <source@mvista.com> # Bruno Randolf <bruno.randolf@4g-systems.biz> # # Makefile for 4G Systems MTX-1 board. diff --git a/arch/mips/au1000/mtx-1/board_setup.c b/arch/mips/au1000/mtx-1/board_setup.c index 5736354829c6..3f8079186cf2 100644 --- a/arch/mips/au1000/mtx-1/board_setup.c +++ b/arch/mips/au1000/mtx-1/board_setup.c @@ -3,9 +3,8 @@ * BRIEF MODULE DESCRIPTION * 4G Systems MTX-1 board setup. * - * Copyright 2003 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com + * Copyright 2003, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> * Bruno Randolf <bruno.randolf@4g-systems.biz> * * This program is free software; you can redistribute it and/or modify it @@ -34,7 +33,7 @@ #include <asm/mach-au1x00/au1000.h> extern int (*board_pci_idsel)(unsigned int devsel, int assert); -int mtx1_pci_idsel(unsigned int devsel, int assert); +int mtx1_pci_idsel(unsigned int devsel, int assert); void board_reset(void) { @@ -45,36 +44,36 @@ void board_reset(void) void __init board_setup(void) { #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) - // enable USB power switch - au_writel( au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR ); - au_writel( 0x100000, GPIO2_OUTPUT ); + /* Enable USB power switch */ + au_writel(au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR); + au_writel(0x100000, GPIO2_OUTPUT); #endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */ #ifdef CONFIG_PCI #if defined(__MIPSEB__) - au_writel(0xf | (2<<6) | (1<<4), Au1500_PCI_CFG); + au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG); #else au_writel(0xf, Au1500_PCI_CFG); #endif #endif - // initialize sys_pinfunc: - au_writel( SYS_PF_NI2, SYS_PINFUNC ); + /* Initialize sys_pinfunc */ + au_writel(SYS_PF_NI2, SYS_PINFUNC); - // initialize GPIO - au_writel( 0xFFFFFFFF, SYS_TRIOUTCLR ); - au_writel( 0x00000001, SYS_OUTPUTCLR ); // set M66EN (PCI 66MHz) to OFF - au_writel( 0x00000008, SYS_OUTPUTSET ); // set PCI CLKRUN# to OFF - au_writel( 0x00000002, SYS_OUTPUTSET ); // set EXT_IO3 ON - au_writel( 0x00000020, SYS_OUTPUTCLR ); // set eth PHY TX_ER to OFF + /* Initialize GPIO */ + au_writel(0xFFFFFFFF, SYS_TRIOUTCLR); + au_writel(0x00000001, SYS_OUTPUTCLR); /* set M66EN (PCI 66MHz) to OFF */ + au_writel(0x00000008, SYS_OUTPUTSET); /* set PCI CLKRUN# to OFF */ + au_writel(0x00000002, SYS_OUTPUTSET); /* set EXT_IO3 ON */ + au_writel(0x00000020, SYS_OUTPUTCLR); /* set eth PHY TX_ER to OFF */ - // enable LED and set it to green - au_writel( au_readl(GPIO2_DIR) | 0x1800, GPIO2_DIR ); - au_writel( 0x18000800, GPIO2_OUTPUT ); + /* Enable LED and set it to green */ + au_writel(au_readl(GPIO2_DIR) | 0x1800, GPIO2_DIR); + au_writel(0x18000800, GPIO2_OUTPUT); board_pci_idsel = mtx1_pci_idsel; - printk("4G Systems MTX-1 Board\n"); + printk(KERN_INFO "4G Systems MTX-1 Board\n"); } int @@ -82,20 +81,18 @@ mtx1_pci_idsel(unsigned int devsel, int assert) { #define MTX_IDSEL_ONLY_0_AND_3 0 #if MTX_IDSEL_ONLY_0_AND_3 - if (devsel != 0 && devsel != 3) { - printk("*** not 0 or 3\n"); - return 0; - } + if (devsel != 0 && devsel != 3) { + printk(KERN_ERR "*** not 0 or 3\n"); + return 0; + } #endif - if (assert && devsel != 0) { - // suppress signal to cardbus - au_writel( 0x00000002, SYS_OUTPUTCLR ); // set EXT_IO3 OFF - } - else { - au_writel( 0x00000002, SYS_OUTPUTSET ); // set EXT_IO3 ON - } - au_sync_udelay(1); - return 1; + if (assert && devsel != 0) + /* Suppress signal to Cardbus */ + au_writel(0x00000002, SYS_OUTPUTCLR); /* set EXT_IO3 OFF */ + else + au_writel(0x00000002, SYS_OUTPUTSET); /* set EXT_IO3 ON */ + au_sync_udelay(1); + return 1; } diff --git a/arch/mips/au1000/mtx-1/init.c b/arch/mips/au1000/mtx-1/init.c index c015cbce1cca..33a4aebe0cba 100644 --- a/arch/mips/au1000/mtx-1/init.c +++ b/arch/mips/au1000/mtx-1/init.c @@ -3,9 +3,8 @@ * BRIEF MODULE DESCRIPTION * 4G Systems MTX-1 board setup * - * Copyright 2003 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com + * Copyright 2003, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> * Bruno Randolf <bruno.randolf@4g-systems.biz> * * This program is free software; you can redistribute it and/or modify it @@ -47,8 +46,8 @@ void __init prom_init(void) unsigned long memsize; prom_argc = fw_arg0; - prom_argv = (char **) fw_arg1; - prom_envp = (char **) fw_arg2; + prom_argv = (char **)fw_arg1; + prom_envp = (char **)fw_arg2; prom_init_cmdline(); @@ -56,6 +55,6 @@ void __init prom_init(void) if (!memsize_str) memsize = 0x04000000; else - memsize = simple_strtol(memsize_str, NULL, 0); + memsize = strict_strtol(memsize_str, 0, NULL); add_memory_region(0, memsize, BOOT_MEM_RAM); } diff --git a/arch/mips/au1000/mtx-1/irqmap.c b/arch/mips/au1000/mtx-1/irqmap.c index 78d70c42c9db..f2bf02951e9c 100644 --- a/arch/mips/au1000/mtx-1/irqmap.c +++ b/arch/mips/au1000/mtx-1/irqmap.c @@ -31,18 +31,18 @@ #include <asm/mach-au1x00/au1000.h> char irq_tab_alchemy[][5] __initdata = { - [0] = { -1, INTA, INTA, INTX, INTX}, /* IDSEL 00 - AdapterA-Slot0 (top) */ - [1] = { -1, INTB, INTA, INTX, INTX}, /* IDSEL 01 - AdapterA-Slot1 (bottom) */ - [2] = { -1, INTC, INTD, INTX, INTX}, /* IDSEL 02 - AdapterB-Slot0 (top) */ - [3] = { -1, INTD, INTC, INTX, INTX}, /* IDSEL 03 - AdapterB-Slot1 (bottom) */ - [4] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 04 - AdapterC-Slot0 (top) */ - [5] = { -1, INTB, INTA, INTX, INTX}, /* IDSEL 05 - AdapterC-Slot1 (bottom) */ - [6] = { -1, INTC, INTD, INTX, INTX}, /* IDSEL 06 - AdapterD-Slot0 (top) */ - [7] = { -1, INTD, INTC, INTX, INTX}, /* IDSEL 07 - AdapterD-Slot1 (bottom) */ + [0] = { -1, INTA, INTA, INTX, INTX }, /* IDSEL 00 - AdapterA-Slot0 (top) */ + [1] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */ + [2] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 02 - AdapterB-Slot0 (top) */ + [3] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */ + [4] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 04 - AdapterC-Slot0 (top) */ + [5] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */ + [6] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 06 - AdapterD-Slot0 (top) */ + [7] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */ }; struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { - { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0}, + { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 }, { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 }, { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 }, { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 }, diff --git a/arch/mips/au1000/mtx-1/platform.c b/arch/mips/au1000/mtx-1/platform.c index a7edbf0829ac..9807be37c32f 100644 --- a/arch/mips/au1000/mtx-1/platform.c +++ b/arch/mips/au1000/mtx-1/platform.c @@ -21,11 +21,10 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/leds.h> +#include <linux/gpio.h> #include <linux/gpio_keys.h> #include <linux/input.h> -#include <asm/gpio.h> - static struct gpio_keys_button mtx1_gpio_button[] = { { .gpio = 207, diff --git a/arch/mips/au1000/pb1000/Makefile b/arch/mips/au1000/pb1000/Makefile index daa1a507e72f..99bbec0ca41b 100644 --- a/arch/mips/au1000/pb1000/Makefile +++ b/arch/mips/au1000/pb1000/Makefile @@ -1,8 +1,8 @@ # -# Copyright 2000 MontaVista Software Inc. -# Author: MontaVista Software, Inc. -# ppopov@mvista.com or source@mvista.com +# Copyright 2000, 2008 MontaVista Software Inc. +# Author: MontaVista Software, Inc. <source@mvista.com> +# +# Makefile for the Alchemy Semiconductor Pb1000 board. # -# Makefile for the Alchemy Semiconductor PB1000 board. lib-y := init.o board_setup.o irqmap.o diff --git a/arch/mips/au1000/pb1000/board_setup.c b/arch/mips/au1000/pb1000/board_setup.c index 33f15acc1b17..25df167a95b3 100644 --- a/arch/mips/au1000/pb1000/board_setup.c +++ b/arch/mips/au1000/pb1000/board_setup.c @@ -1,7 +1,6 @@ /* - * Copyright 2000 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com + * Copyright 2000, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -40,128 +39,126 @@ void __init board_setup(void) u32 sys_freqctrl, sys_clksrc; u32 prid = read_c0_prid(); - // set AUX clock to 12MHz * 8 = 96 MHz + /* Set AUX clock to 12 MHz * 8 = 96 MHz */ au_writel(8, SYS_AUXPLL); au_writel(0, SYS_PINSTATERD); udelay(100); #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) - /* zero and disable FREQ2 */ + /* Zero and disable FREQ2 */ sys_freqctrl = au_readl(SYS_FREQCTRL0); sys_freqctrl &= ~0xFFF00000; au_writel(sys_freqctrl, SYS_FREQCTRL0); - /* zero and disable USBH/USBD clocks */ + /* Zero and disable USBH/USBD clocks */ sys_clksrc = au_readl(SYS_CLKSRC); - sys_clksrc &= ~0x00007FE0; + sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK | + SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK); au_writel(sys_clksrc, SYS_CLKSRC); sys_freqctrl = au_readl(SYS_FREQCTRL0); sys_freqctrl &= ~0xFFF00000; sys_clksrc = au_readl(SYS_CLKSRC); - sys_clksrc &= ~0x00007FE0; + sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK | + SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK); - switch (prid & 0x000000FF) - { + switch (prid & 0x000000FF) { case 0x00: /* DA */ case 0x01: /* HA */ case 0x02: /* HB */ - /* CPU core freq to 48MHz to slow it way down... */ - au_writel(4, SYS_CPUPLL); + /* CPU core freq to 48 MHz to slow it way down... */ + au_writel(4, SYS_CPUPLL); - /* - * Setup 48MHz FREQ2 from CPUPLL for USB Host - */ - /* FRDIV2=3 -> div by 8 of 384MHz -> 48MHz */ - sys_freqctrl |= ((3<<22) | (1<<21) | (0<<20)); - au_writel(sys_freqctrl, SYS_FREQCTRL0); + /* + * Setup 48 MHz FREQ2 from CPUPLL for USB Host + * FRDIV2 = 3 -> div by 8 of 384 MHz -> 48 MHz + */ + sys_freqctrl |= (3 << SYS_FC_FRDIV2_BIT) | SYS_FC_FE2; + au_writel(sys_freqctrl, SYS_FREQCTRL0); - /* CPU core freq to 384MHz */ - au_writel(0x20, SYS_CPUPLL); + /* CPU core freq to 384 MHz */ + au_writel(0x20, SYS_CPUPLL); - printk("Au1000: 48MHz OHCI workaround enabled\n"); + printk(KERN_INFO "Au1000: 48 MHz OHCI workaround enabled\n"); break; - default: /* HC and newer */ - // FREQ2 = aux/2 = 48 MHz - sys_freqctrl |= ((0<<22) | (1<<21) | (1<<20)); - au_writel(sys_freqctrl, SYS_FREQCTRL0); + default: /* HC and newer */ + /* FREQ2 = aux / 2 = 48 MHz */ + sys_freqctrl |= (0 << SYS_FC_FRDIV2_BIT) | + SYS_FC_FE2 | SYS_FC_FS2; + au_writel(sys_freqctrl, SYS_FREQCTRL0); break; } /* - * Route 48MHz FREQ2 into USB Host and/or Device + * Route 48 MHz FREQ2 into USB Host and/or Device */ -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) - sys_clksrc |= ((4<<12) | (0<<11) | (0<<10)); -#endif + sys_clksrc |= SYS_CS_MUX_FQ2 << SYS_CS_MUH_BIT; au_writel(sys_clksrc, SYS_CLKSRC); - // configure pins GPIO[14:9] as GPIO - pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8080); + /* Configure pins GPIO[14:9] as GPIO */ + pin_func = au_readl(SYS_PINFUNC) & ~(SYS_PF_UR3 | SYS_PF_USB); - // 2nd USB port is USB host - pin_func |= 0x8000; + /* 2nd USB port is USB host */ + pin_func |= SYS_PF_USB; au_writel(pin_func, SYS_PINFUNC); au_writel(0x2800, SYS_TRIOUTCLR); au_writel(0x0030, SYS_OUTPUTCLR); #endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */ - // make gpio 15 an input (for interrupt line) - pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x100); - // we don't need I2S, so make it available for GPIO[31:29] - pin_func |= (1<<5); + /* Make GPIO 15 an input (for interrupt line) */ + pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_IRF; + /* We don't need I2S, so make it available for GPIO[31:29] */ + pin_func |= SYS_PF_I2S; au_writel(pin_func, SYS_PINFUNC); au_writel(0x8000, SYS_TRIOUTCLR); - static_cfg0 = au_readl(MEM_STCFG0) & (u32)(~0xc00); + static_cfg0 = au_readl(MEM_STCFG0) & ~0xc00; au_writel(static_cfg0, MEM_STCFG0); - // configure RCE2* for LCD + /* configure RCE2* for LCD */ au_writel(0x00000004, MEM_STCFG2); - // MEM_STTIME2 + /* MEM_STTIME2 */ au_writel(0x09000000, MEM_STTIME2); - // Set 32-bit base address decoding for RCE2* + /* Set 32-bit base address decoding for RCE2* */ au_writel(0x10003ff0, MEM_STADDR2); - // PCI CPLD setup - // expand CE0 to cover PCI + /* + * PCI CPLD setup + * Expand CE0 to cover PCI + */ au_writel(0x11803e40, MEM_STADDR1); - // burst visibility on + /* Burst visibility on */ au_writel(au_readl(MEM_STCFG0) | 0x1000, MEM_STCFG0); - au_writel(0x83, MEM_STCFG1); // ewait enabled, flash timing - au_writel(0x33030a10, MEM_STTIME1); // slower timing for FPGA + au_writel(0x83, MEM_STCFG1); /* ewait enabled, flash timing */ + au_writel(0x33030a10, MEM_STTIME1); /* slower timing for FPGA */ - /* setup the static bus controller */ + /* Setup the static bus controller */ au_writel(0x00000002, MEM_STCFG3); /* type = PCMCIA */ au_writel(0x280E3D07, MEM_STTIME3); /* 250ns cycle time */ au_writel(0x10000000, MEM_STADDR3); /* any PCMCIA select */ -#ifdef CONFIG_PCI - au_writel(0, PCI_BRIDGE_CONFIG); // set extend byte to 0 - au_writel(0, SDRAM_MBAR); // set mbar to 0 - au_writel(0x2, SDRAM_CMD); // enable memory accesses - au_sync_delay(1); -#endif - - /* Enable Au1000 BCLK switching - note: sed1356 must not use - * its BCLK (Au1000 LCLK) for any timings */ - switch (prid & 0x000000FF) - { + /* + * Enable Au1000 BCLK switching - note: sed1356 must not use + * its BCLK (Au1000 LCLK) for any timings + */ + switch (prid & 0x000000FF) { case 0x00: /* DA */ case 0x01: /* HA */ case 0x02: /* HB */ break; default: /* HC and newer */ - /* Enable sys bus clock divider when IDLE state or no bus - activity. */ + /* + * Enable sys bus clock divider when IDLE state or no bus + * activity. + */ au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL); break; } diff --git a/arch/mips/au1000/pb1000/init.c b/arch/mips/au1000/pb1000/init.c index 549447df71d6..3837365d613d 100644 --- a/arch/mips/au1000/pb1000/init.c +++ b/arch/mips/au1000/pb1000/init.c @@ -1,10 +1,9 @@ /* * BRIEF MODULE DESCRIPTION - * PB1000 board setup + * Pb1000 board setup * - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -44,16 +43,15 @@ void __init prom_init(void) unsigned char *memsize_str; unsigned long memsize; - prom_argc = (int) fw_arg0; - prom_argv = (char **) fw_arg1; - prom_envp = (char **) fw_arg2; + prom_argc = (int)fw_arg0; + prom_argv = (char **)fw_arg1; + prom_envp = (char **)fw_arg2; prom_init_cmdline(); memsize_str = prom_getenv("memsize"); - if (!memsize_str) { + if (!memsize_str) memsize = 0x04000000; - } else { - memsize = simple_strtol(memsize_str, NULL, 0); - } + else + memsize = strict_strtol(memsize_str, 0, NULL); add_memory_region(0, memsize, BOOT_MEM_RAM); } diff --git a/arch/mips/au1000/pb1100/Makefile b/arch/mips/au1000/pb1100/Makefile index 996236df6375..793e97c49e46 100644 --- a/arch/mips/au1000/pb1100/Makefile +++ b/arch/mips/au1000/pb1100/Makefile @@ -1,8 +1,8 @@ # -# Copyright 2000,2001 MontaVista Software Inc. -# Author: MontaVista Software, Inc. -# ppopov@mvista.com or source@mvista.com +# Copyright 2000, 2001, 2008 MontaVista Software Inc. +# Author: MontaVista Software, Inc. <source@mvista.com> # # Makefile for the Alchemy Semiconductor Pb1100 board. +# lib-y := init.o board_setup.o irqmap.o diff --git a/arch/mips/au1000/pb1100/board_setup.c b/arch/mips/au1000/pb1100/board_setup.c index 656164c8e9ca..c0bfd59a7a36 100644 --- a/arch/mips/au1000/pb1100/board_setup.c +++ b/arch/mips/au1000/pb1100/board_setup.c @@ -1,7 +1,6 @@ /* - * Copyright 2002 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com + * Copyright 2002, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -32,15 +31,15 @@ void board_reset(void) { - /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */ - au_writel(0x00000000, 0xAE00001C); + /* Hit BCSR.RST_VDDI[SOFT_RESET] */ + au_writel(0x00000000, PB1100_RST_VDDI); } void __init board_setup(void) { - volatile void __iomem * base = (volatile void __iomem *) 0xac000000UL; + volatile void __iomem *base = (volatile void __iomem *)0xac000000UL; - // set AUX clock to 12MHz * 8 = 96 MHz + /* Set AUX clock to 12 MHz * 8 = 96 MHz */ au_writel(8, SYS_AUXPLL); au_writel(0, SYS_PININPUTEN); udelay(100); @@ -49,44 +48,47 @@ void __init board_setup(void) { u32 pin_func, sys_freqctrl, sys_clksrc; - // configure pins GPIO[14:9] as GPIO - pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x80); + /* Configure pins GPIO[14:9] as GPIO */ + pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_UR3; - /* zero and disable FREQ2 */ + /* Zero and disable FREQ2 */ sys_freqctrl = au_readl(SYS_FREQCTRL0); sys_freqctrl &= ~0xFFF00000; au_writel(sys_freqctrl, SYS_FREQCTRL0); - /* zero and disable USBH/USBD/IrDA clock */ + /* Zero and disable USBH/USBD/IrDA clock */ sys_clksrc = au_readl(SYS_CLKSRC); - sys_clksrc &= ~0x0000001F; + sys_clksrc &= ~(SYS_CS_CIR | SYS_CS_DIR | SYS_CS_MIR_MASK); au_writel(sys_clksrc, SYS_CLKSRC); sys_freqctrl = au_readl(SYS_FREQCTRL0); sys_freqctrl &= ~0xFFF00000; sys_clksrc = au_readl(SYS_CLKSRC); - sys_clksrc &= ~0x0000001F; + sys_clksrc &= ~(SYS_CS_CIR | SYS_CS_DIR | SYS_CS_MIR_MASK); - // FREQ2 = aux/2 = 48 MHz - sys_freqctrl |= ((0<<22) | (1<<21) | (1<<20)); + /* FREQ2 = aux / 2 = 48 MHz */ + sys_freqctrl |= (0 << SYS_FC_FRDIV2_BIT) | + SYS_FC_FE2 | SYS_FC_FS2; au_writel(sys_freqctrl, SYS_FREQCTRL0); /* - * Route 48MHz FREQ2 into USBH/USBD/IrDA + * Route 48 MHz FREQ2 into USBH/USBD/IrDA */ - sys_clksrc |= ((4<<2) | (0<<1) | 0 ); + sys_clksrc |= SYS_CS_MUX_FQ2 << SYS_CS_MIR_BIT; au_writel(sys_clksrc, SYS_CLKSRC); - /* setup the static bus controller */ + /* Setup the static bus controller */ au_writel(0x00000002, MEM_STCFG3); /* type = PCMCIA */ au_writel(0x280E3D07, MEM_STTIME3); /* 250ns cycle time */ au_writel(0x10000000, MEM_STADDR3); /* any PCMCIA select */ - // get USB Functionality pin state (device vs host drive pins) - pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000); - // 2nd USB port is USB host - pin_func |= 0x8000; + /* + * Get USB Functionality pin state (device vs host drive pins). + */ + pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_USB; + /* 2nd USB port is USB host. */ + pin_func |= SYS_PF_USB; au_writel(pin_func, SYS_PINFUNC); } #endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */ @@ -94,12 +96,12 @@ void __init board_setup(void) /* Enable sys bus clock divider when IDLE state or no bus activity. */ au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL); - // Enable the RTC if not already enabled + /* Enable the RTC if not already enabled. */ if (!(readb(base + 0x28) & 0x20)) { writeb(readb(base + 0x28) | 0x20, base + 0x28); au_sync(); } - // Put the clock in BCD mode + /* Put the clock in BCD mode. */ if (readb(base + 0x2C) & 0x4) { /* reg B */ writeb(readb(base + 0x2c) & ~0x4, base + 0x2c); au_sync(); diff --git a/arch/mips/au1000/pb1100/init.c b/arch/mips/au1000/pb1100/init.c index c91344648ed3..8355483f3de2 100644 --- a/arch/mips/au1000/pb1100/init.c +++ b/arch/mips/au1000/pb1100/init.c @@ -3,9 +3,8 @@ * BRIEF MODULE DESCRIPTION * Pb1100 board setup * - * Copyright 2002 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com + * Copyright 2002, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -46,8 +45,8 @@ void __init prom_init(void) unsigned long memsize; prom_argc = fw_arg0; - prom_argv = (char **) fw_arg1; - prom_envp = (char **) fw_arg3; + prom_argv = (char **)fw_arg1; + prom_envp = (char **)fw_arg3; prom_init_cmdline(); @@ -55,7 +54,7 @@ void __init prom_init(void) if (!memsize_str) memsize = 0x04000000; else - memsize = simple_strtol(memsize_str, NULL, 0); + memsize = strict_strtol(memsize_str, 0, NULL); add_memory_region(0, memsize, BOOT_MEM_RAM); } diff --git a/arch/mips/au1000/pb1100/irqmap.c b/arch/mips/au1000/pb1100/irqmap.c index b5021e3d477f..9b7dd8b41283 100644 --- a/arch/mips/au1000/pb1100/irqmap.c +++ b/arch/mips/au1000/pb1100/irqmap.c @@ -1,6 +1,6 @@ /* * BRIEF MODULE DESCRIPTION - * Au1xxx irq map table + * Au1xx0 IRQ map table * * Copyright 2003 Embedded Edge, LLC * dan@embeddededge.com @@ -31,10 +31,10 @@ #include <asm/mach-au1x00/au1000.h> struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { - { AU1000_GPIO_9, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card Fully_Interted# - { AU1000_GPIO_10, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card STSCHG# - { AU1000_GPIO_11, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card IRQ# - { AU1000_GPIO_13, INTC_INT_LOW_LEVEL, 0 }, // DC_IRQ# + { AU1000_GPIO_9, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card Fully_Inserted# */ + { AU1000_GPIO_10, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card STSCHG# */ + { AU1000_GPIO_11, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card IRQ# */ + { AU1000_GPIO_13, INTC_INT_LOW_LEVEL, 0 }, /* DC_IRQ# */ }; int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map); diff --git a/arch/mips/au1000/pb1200/Makefile b/arch/mips/au1000/pb1200/Makefile index 4fe02ea65a60..d678adf7ce85 100644 --- a/arch/mips/au1000/pb1200/Makefile +++ b/arch/mips/au1000/pb1200/Makefile @@ -1,5 +1,5 @@ # -# Makefile for the Alchemy Semiconductor PB1200 board. +# Makefile for the Alchemy Semiconductor Pb1200/DBAu1200 boards. # lib-y := init.o board_setup.o irqmap.o diff --git a/arch/mips/au1000/pb1200/board_setup.c b/arch/mips/au1000/pb1200/board_setup.c index 4493a792cc4c..6cb2115059ad 100644 --- a/arch/mips/au1000/pb1200/board_setup.c +++ b/arch/mips/au1000/pb1200/board_setup.c @@ -27,16 +27,8 @@ #include <linux/init.h> #include <linux/sched.h> -#include <au1000.h> #include <prom.h> - -#ifdef CONFIG_MIPS_PB1200 -#include <asm/mach-pb1x00/pb1200.h> -#endif - -#ifdef CONFIG_MIPS_DB1200 -#include <asm/mach-db1x00/db1200.h> -#endif +#include <au1xxx.h> extern void _board_init_irq(void); extern void (*board_init_irq)(void); @@ -53,56 +45,57 @@ void __init board_setup(void) #if 0 { - u32 pin_func; - - /* Enable PSC1 SYNC for AC97. Normaly done in audio driver, - * but it is board specific code, so put it here. - */ - pin_func = au_readl(SYS_PINFUNC); - au_sync(); - pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1; - au_writel(pin_func, SYS_PINFUNC); - - au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */ - au_sync(); + u32 pin_func; + + /* + * Enable PSC1 SYNC for AC97. Normaly done in audio driver, + * but it is board specific code, so put it here. + */ + pin_func = au_readl(SYS_PINFUNC); + au_sync(); + pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1; + au_writel(pin_func, SYS_PINFUNC); + + au_writel(0, (u32)bcsr | 0x10); /* turn off PCMCIA power */ + au_sync(); } #endif #if defined(CONFIG_I2C_AU1550) { - u32 freq0, clksrc; - u32 pin_func; - - /* Select SMBUS in CPLD */ - bcsr->resets &= ~(BCSR_RESETS_PCS0MUX); - - pin_func = au_readl(SYS_PINFUNC); - au_sync(); - pin_func &= ~(3<<17 | 1<<4); - /* Set GPIOs correctly */ - pin_func |= 2<<17; - au_writel(pin_func, SYS_PINFUNC); - au_sync(); - - /* The i2c driver depends on 50Mhz clock */ - freq0 = au_readl(SYS_FREQCTRL0); - au_sync(); - freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1); - freq0 |= (3<<SYS_FC_FRDIV1_BIT); - /* 396Mhz / (3+1)*2 == 49.5Mhz */ - au_writel(freq0, SYS_FREQCTRL0); - au_sync(); - freq0 |= SYS_FC_FE1; - au_writel(freq0, SYS_FREQCTRL0); - au_sync(); - - clksrc = au_readl(SYS_CLKSRC); - au_sync(); - clksrc &= ~0x01f00000; - /* bit 22 is EXTCLK0 for PSC0 */ - clksrc |= (0x3 << 22); - au_writel(clksrc, SYS_CLKSRC); - au_sync(); + u32 freq0, clksrc; + u32 pin_func; + + /* Select SMBus in CPLD */ + bcsr->resets &= ~BCSR_RESETS_PCS0MUX; + + pin_func = au_readl(SYS_PINFUNC); + au_sync(); + pin_func &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B); + /* Set GPIOs correctly */ + pin_func |= 2 << 17; + au_writel(pin_func, SYS_PINFUNC); + au_sync(); + + /* The I2C driver depends on 50 MHz clock */ + freq0 = au_readl(SYS_FREQCTRL0); + au_sync(); + freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1); + freq0 |= 3 << SYS_FC_FRDIV1_BIT; + /* 396 MHz / (3 + 1) * 2 == 49.5 MHz */ + au_writel(freq0, SYS_FREQCTRL0); + au_sync(); + freq0 |= SYS_FC_FE1; + au_writel(freq0, SYS_FREQCTRL0); + au_sync(); + + clksrc = au_readl(SYS_CLKSRC); + au_sync(); + clksrc &= ~(SYS_CS_CE0 | SYS_CS_DE0 | SYS_CS_ME0_MASK); + /* Bit 22 is EXTCLK0 for PSC0 */ + clksrc |= SYS_CS_MUX_FQ1 << SYS_CS_ME0_BIT; + au_writel(clksrc, SYS_CLKSRC); + au_sync(); } #endif @@ -116,27 +109,27 @@ void __init board_setup(void) #endif #endif - /* The Pb1200 development board uses external MUX for PSC0 to - support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI - */ + /* + * The Pb1200 development board uses external MUX for PSC0 to + * support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI + */ #ifdef CONFIG_I2C_AU1550 - bcsr->resets &= (~BCSR_RESETS_PCS0MUX); + bcsr->resets &= ~BCSR_RESETS_PCS0MUX; #endif au_sync(); #ifdef CONFIG_MIPS_PB1200 - printk("AMD Alchemy Pb1200 Board\n"); + printk(KERN_INFO "AMD Alchemy Pb1200 Board\n"); #endif #ifdef CONFIG_MIPS_DB1200 - printk("AMD Alchemy Db1200 Board\n"); + printk(KERN_INFO "AMD Alchemy Db1200 Board\n"); #endif /* Setup Pb1200 External Interrupt Controller */ board_init_irq = _board_init_irq; } -int -board_au1200fb_panel(void) +int board_au1200fb_panel(void) { BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR; int p; @@ -147,23 +140,23 @@ board_au1200fb_panel(void) return p; } -int -board_au1200fb_panel_init(void) +int board_au1200fb_panel_init(void) { /* Apply power */ - BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR; - bcsr->board |= (BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL); - /*printk("board_au1200fb_panel_init()\n"); */ + BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR; + + bcsr->board |= BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL; + /* printk(KERN_DEBUG "board_au1200fb_panel_init()\n"); */ return 0; } -int -board_au1200fb_panel_shutdown(void) +int board_au1200fb_panel_shutdown(void) { /* Remove power */ - BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR; - bcsr->board &= ~(BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL); - /*printk("board_au1200fb_panel_shutdown()\n"); */ + BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR; + + bcsr->board &= ~(BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | + BCSR_BOARD_LCDBL); + /* printk(KERN_DEBUG "board_au1200fb_panel_shutdown()\n"); */ return 0; } - diff --git a/arch/mips/au1000/pb1200/init.c b/arch/mips/au1000/pb1200/init.c index 72af5500660b..09fd63b86062 100644 --- a/arch/mips/au1000/pb1200/init.c +++ b/arch/mips/au1000/pb1200/init.c @@ -3,9 +3,8 @@ * BRIEF MODULE DESCRIPTION * PB1200 board setup * - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -45,16 +44,15 @@ void __init prom_init(void) unsigned char *memsize_str; unsigned long memsize; - prom_argc = (int) fw_arg0; - prom_argv = (char **) fw_arg1; - prom_envp = (char **) fw_arg2; + prom_argc = (int)fw_arg0; + prom_argv = (char **)fw_arg1; + prom_envp = (char **)fw_arg2; prom_init_cmdline(); memsize_str = prom_getenv("memsize"); - if (!memsize_str) { + if (!memsize_str) memsize = 0x08000000; - } else { - memsize = simple_strtol(memsize_str, NULL, 0); - } + else + memsize = strict_strtol(memsize_str, 0, NULL); add_memory_region(0, memsize, BOOT_MEM_RAM); } diff --git a/arch/mips/au1000/pb1200/irqmap.c b/arch/mips/au1000/pb1200/irqmap.c index e61eb8e0b76b..2a505ad8715b 100644 --- a/arch/mips/au1000/pb1200/irqmap.c +++ b/arch/mips/au1000/pb1200/irqmap.c @@ -39,25 +39,25 @@ #endif struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { - { AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 }, // This is exteranl interrupt cascade + /* This is external interrupt cascade */ + { AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 }, }; int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map); /* - * Support for External interrupts on the PbAu1200 Development platform. + * Support for External interrupts on the Pb1200 Development platform. */ -static volatile int pb1200_cascade_en=0; +static volatile int pb1200_cascade_en; -irqreturn_t pb1200_cascade_handler( int irq, void *dev_id) +irqreturn_t pb1200_cascade_handler(int irq, void *dev_id) { unsigned short bisr = bcsr->int_status; int extirq_nr = 0; - /* Clear all the edge interrupts. This has no effect on level */ + /* Clear all the edge interrupts. This has no effect on level. */ bcsr->int_status = bisr; - for( ; bisr; bisr &= (bisr-1) ) - { + for ( ; bisr; bisr &= bisr - 1) { extirq_nr = PB1200_INT_BEGIN + __ffs(bisr); /* Ack and dispatch IRQ */ do_IRQ(extirq_nr); @@ -68,26 +68,20 @@ irqreturn_t pb1200_cascade_handler( int irq, void *dev_id) inline void pb1200_enable_irq(unsigned int irq_nr) { - bcsr->intset_mask = 1<<(irq_nr - PB1200_INT_BEGIN); - bcsr->intset = 1<<(irq_nr - PB1200_INT_BEGIN); + bcsr->intset_mask = 1 << (irq_nr - PB1200_INT_BEGIN); + bcsr->intset = 1 << (irq_nr - PB1200_INT_BEGIN); } inline void pb1200_disable_irq(unsigned int irq_nr) { - bcsr->intclr_mask = 1<<(irq_nr - PB1200_INT_BEGIN); - bcsr->intclr = 1<<(irq_nr - PB1200_INT_BEGIN); + bcsr->intclr_mask = 1 << (irq_nr - PB1200_INT_BEGIN); + bcsr->intclr = 1 << (irq_nr - PB1200_INT_BEGIN); } static unsigned int pb1200_setup_cascade(void) { - int err; - - err = request_irq(AU1000_GPIO_7, &pb1200_cascade_handler, - 0, "Pb1200 Cascade", &pb1200_cascade_handler); - if (err) - return err; - - return 0; + return request_irq(AU1000_GPIO_7, &pb1200_cascade_handler, + 0, "Pb1200 Cascade", &pb1200_cascade_handler); } static unsigned int pb1200_startup_irq(unsigned int irq) @@ -132,23 +126,23 @@ void _board_init_irq(void) unsigned int irq; #ifdef CONFIG_MIPS_PB1200 - /* We have a problem with CPLD rev3. Enable a workaround */ + /* We have a problem with CPLD rev 3. */ if (((bcsr->whoami & BCSR_WHOAMI_CPLD) >> 4) <= 3) { - printk("\nWARNING!!!\n"); - printk("\nWARNING!!!\n"); - printk("\nWARNING!!!\n"); - printk("\nWARNING!!!\n"); - printk("\nWARNING!!!\n"); - printk("\nWARNING!!!\n"); - printk("Pb1200 must be at CPLD rev4. Please have Pb1200\n"); - printk("updated to latest revision. This software will not\n"); - printk("work on anything less than CPLD rev4\n"); - printk("\nWARNING!!!\n"); - printk("\nWARNING!!!\n"); - printk("\nWARNING!!!\n"); - printk("\nWARNING!!!\n"); - printk("\nWARNING!!!\n"); - printk("\nWARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "Pb1200 must be at CPLD rev 4. Please have Pb1200\n"); + printk(KERN_ERR "updated to latest revision. This software will\n"); + printk(KERN_ERR "not work on anything less than CPLD rev 4.\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); panic("Game over. Your score is 0."); } #endif @@ -161,6 +155,6 @@ void _board_init_irq(void) /* * GPIO_7 can not be hooked here, so it is hooked upon first - * request of any source attached to the cascade + * request of any source attached to the cascade. */ } diff --git a/arch/mips/au1000/pb1500/Makefile b/arch/mips/au1000/pb1500/Makefile index 97a730813cd3..602f38df20bb 100644 --- a/arch/mips/au1000/pb1500/Makefile +++ b/arch/mips/au1000/pb1500/Makefile @@ -1,8 +1,8 @@ # -# Copyright 2000,2001 MontaVista Software Inc. -# Author: MontaVista Software, Inc. -# ppopov@mvista.com or source@mvista.com +# Copyright 2000, 2001, 2008 MontaVista Software Inc. +# Author: MontaVista Software, Inc. <source@mvista.com> # # Makefile for the Alchemy Semiconductor Pb1500 board. +# lib-y := init.o board_setup.o irqmap.o diff --git a/arch/mips/au1000/pb1500/board_setup.c b/arch/mips/au1000/pb1500/board_setup.c index 24c652e8ec4b..035771c6e5b8 100644 --- a/arch/mips/au1000/pb1500/board_setup.c +++ b/arch/mips/au1000/pb1500/board_setup.c @@ -1,7 +1,6 @@ /* - * Copyright 2000 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com + * Copyright 2000, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -32,8 +31,8 @@ void board_reset(void) { - /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */ - au_writel(0x00000000, 0xAE00001C); + /* Hit BCSR.RST_VDDI[SOFT_RESET] */ + au_writel(0x00000000, PB1500_RST_VDDI); } void __init board_setup(void) @@ -42,7 +41,7 @@ void __init board_setup(void) u32 sys_freqctrl, sys_clksrc; sys_clksrc = sys_freqctrl = pin_func = 0; - // set AUX clock to 12MHz * 8 = 96 MHz + /* Set AUX clock to 12 MHz * 8 = 96 MHz */ au_writel(8, SYS_AUXPLL); au_writel(0, SYS_PINSTATERD); udelay(100); @@ -51,51 +50,48 @@ void __init board_setup(void) /* GPIO201 is input for PCMCIA card detect */ /* GPIO203 is input for PCMCIA interrupt request */ - au_writel(au_readl(GPIO2_DIR) & (u32)(~((1<<1)|(1<<3))), GPIO2_DIR); + au_writel(au_readl(GPIO2_DIR) & ~((1 << 1) | (1 << 3)), GPIO2_DIR); - /* zero and disable FREQ2 */ + /* Zero and disable FREQ2 */ sys_freqctrl = au_readl(SYS_FREQCTRL0); sys_freqctrl &= ~0xFFF00000; au_writel(sys_freqctrl, SYS_FREQCTRL0); /* zero and disable USBH/USBD clocks */ sys_clksrc = au_readl(SYS_CLKSRC); - sys_clksrc &= ~0x00007FE0; + sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK | + SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK); au_writel(sys_clksrc, SYS_CLKSRC); sys_freqctrl = au_readl(SYS_FREQCTRL0); sys_freqctrl &= ~0xFFF00000; sys_clksrc = au_readl(SYS_CLKSRC); - sys_clksrc &= ~0x00007FE0; + sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK | + SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK); - // FREQ2 = aux/2 = 48 MHz - sys_freqctrl |= ((0<<22) | (1<<21) | (1<<20)); + /* FREQ2 = aux/2 = 48 MHz */ + sys_freqctrl |= (0 << SYS_FC_FRDIV2_BIT) | SYS_FC_FE2 | SYS_FC_FS2; au_writel(sys_freqctrl, SYS_FREQCTRL0); /* * Route 48MHz FREQ2 into USB Host and/or Device */ -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) - sys_clksrc |= ((4<<12) | (0<<11) | (0<<10)); -#endif + sys_clksrc |= SYS_CS_MUX_FQ2 << SYS_CS_MUH_BIT; au_writel(sys_clksrc, SYS_CLKSRC); - - pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000); - // 2nd USB port is USB host - pin_func |= 0x8000; + pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_USB; + /* 2nd USB port is USB host */ + pin_func |= SYS_PF_USB; au_writel(pin_func, SYS_PINFUNC); #endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */ - - #ifdef CONFIG_PCI - // Setup PCI bus controller + /* Setup PCI bus controller */ au_writel(0, Au1500_PCI_CMEM); au_writel(0x00003fff, Au1500_CFG_BASE); #if defined(__MIPSEB__) - au_writel(0xf | (2<<6) | (1<<4), Au1500_PCI_CFG); + au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG); #else au_writel(0xf, Au1500_PCI_CFG); #endif @@ -112,11 +108,11 @@ void __init board_setup(void) /* Enable the RTC if not already enabled */ if (!(au_readl(0xac000028) & 0x20)) { - printk("enabling clock ...\n"); + printk(KERN_INFO "enabling clock ...\n"); au_writel((au_readl(0xac000028) | 0x20), 0xac000028); } /* Put the clock in BCD mode */ - if (au_readl(0xac00002C) & 0x4) { /* reg B */ + if (au_readl(0xac00002c) & 0x4) { /* reg B */ au_writel(au_readl(0xac00002c) & ~0x4, 0xac00002c); au_sync(); } diff --git a/arch/mips/au1000/pb1500/init.c b/arch/mips/au1000/pb1500/init.c index 488507c07db9..49f51e165863 100644 --- a/arch/mips/au1000/pb1500/init.c +++ b/arch/mips/au1000/pb1500/init.c @@ -1,11 +1,10 @@ /* * * BRIEF MODULE DESCRIPTION - * PB1500 board setup + * Pb1500 board setup * - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -45,16 +44,15 @@ void __init prom_init(void) unsigned char *memsize_str; unsigned long memsize; - prom_argc = (int) fw_arg0; - prom_argv = (char **) fw_arg1; - prom_envp = (char **) fw_arg2; + prom_argc = (int)fw_arg0; + prom_argv = (char **)fw_arg1; + prom_envp = (char **)fw_arg2; prom_init_cmdline(); memsize_str = prom_getenv("memsize"); - if (!memsize_str) { + if (!memsize_str) memsize = 0x04000000; - } else { - memsize = simple_strtol(memsize_str, NULL, 0); - } + else + memsize = strict_strtol(memsize_str, 0, NULL); add_memory_region(0, memsize, BOOT_MEM_RAM); } diff --git a/arch/mips/au1000/pb1500/irqmap.c b/arch/mips/au1000/pb1500/irqmap.c index 4817ab44d07f..39c4682766a8 100644 --- a/arch/mips/au1000/pb1500/irqmap.c +++ b/arch/mips/au1000/pb1500/irqmap.c @@ -31,12 +31,12 @@ #include <asm/mach-au1x00/au1000.h> char irq_tab_alchemy[][5] __initdata = { - [12] = { -1, INTA, INTX, INTX, INTX}, /* IDSEL 12 - HPT370 */ - [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */ + [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT370 */ + [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */ }; struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { - { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0}, + { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 }, { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 }, { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 }, { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 }, diff --git a/arch/mips/au1000/pb1550/Makefile b/arch/mips/au1000/pb1550/Makefile index aa35bc6cb8cf..7d8beca87fa5 100644 --- a/arch/mips/au1000/pb1550/Makefile +++ b/arch/mips/au1000/pb1550/Makefile @@ -1,9 +1,8 @@ # -# Copyright 2000 MontaVista Software Inc. -# Author: MontaVista Software, Inc. -# ppopov@mvista.com or source@mvista.com +# Copyright 2000, 2008 MontaVista Software Inc. +# Author: MontaVista Software, Inc. <source@mvista.com> # -# Makefile for the Alchemy Semiconductor PB1000 board. +# Makefile for the Alchemy Semiconductor Pb1550 board. # lib-y := init.o board_setup.o irqmap.o diff --git a/arch/mips/au1000/pb1550/board_setup.c b/arch/mips/au1000/pb1550/board_setup.c index 45d60872b565..0ed76b64b6ab 100644 --- a/arch/mips/au1000/pb1550/board_setup.c +++ b/arch/mips/au1000/pb1550/board_setup.c @@ -3,9 +3,8 @@ * BRIEF MODULE DESCRIPTION * Alchemy Pb1550 board setup. * - * Copyright 2000 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com + * Copyright 2000, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -35,15 +34,16 @@ void board_reset(void) { - /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */ - au_writew(au_readw(0xAF00001C) & ~(1<<15), 0xAF00001C); + /* Hit BCSR.SYSTEM[RESET] */ + au_writew(au_readw(0xAF00001C) & ~BCSR_SYSTEM_RESET, 0xAF00001C); } void __init board_setup(void) { u32 pin_func; - /* Enable PSC1 SYNC for AC97. Normaly done in audio driver, + /* + * Enable PSC1 SYNC for AC'97. Normaly done in audio driver, * but it is board specific code, so put it here. */ pin_func = au_readl(SYS_PINFUNC); @@ -51,8 +51,8 @@ void __init board_setup(void) pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1; au_writel(pin_func, SYS_PINFUNC); - au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */ + au_writel(0, (u32)bcsr | 0x10); /* turn off PCMCIA power */ au_sync(); - printk("AMD Alchemy Pb1550 Board\n"); + printk(KERN_INFO "AMD Alchemy Pb1550 Board\n"); } diff --git a/arch/mips/au1000/pb1550/init.c b/arch/mips/au1000/pb1550/init.c index f6b2fc587980..1b5f58434bb7 100644 --- a/arch/mips/au1000/pb1550/init.c +++ b/arch/mips/au1000/pb1550/init.c @@ -1,11 +1,10 @@ /* * * BRIEF MODULE DESCRIPTION - * PB1550 board setup + * Pb1550 board setup * - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -45,16 +44,15 @@ void __init prom_init(void) unsigned char *memsize_str; unsigned long memsize; - prom_argc = (int) fw_arg0; - prom_argv = (char **) fw_arg1; - prom_envp = (char **) fw_arg2; + prom_argc = (int)fw_arg0; + prom_argv = (char **)fw_arg1; + prom_envp = (char **)fw_arg2; prom_init_cmdline(); memsize_str = prom_getenv("memsize"); - if (!memsize_str) { + if (!memsize_str) memsize = 0x08000000; - } else { - memsize = simple_strtol(memsize_str, NULL, 0); - } + else + memsize = strict_strtol(memsize_str, 0, NULL); add_memory_region(0, memsize, BOOT_MEM_RAM); } diff --git a/arch/mips/au1000/pb1550/irqmap.c b/arch/mips/au1000/pb1550/irqmap.c index e1dac37af08a..a02a4d1fa899 100644 --- a/arch/mips/au1000/pb1550/irqmap.c +++ b/arch/mips/au1000/pb1550/irqmap.c @@ -1,6 +1,6 @@ /* * BRIEF MODULE DESCRIPTION - * Au1xxx irq map table + * Au1xx0 IRQ map table * * Copyright 2003 Embedded Edge, LLC * dan@embeddededge.com @@ -31,8 +31,8 @@ #include <asm/mach-au1x00/au1000.h> char irq_tab_alchemy[][5] __initdata = { - [12] = { -1, INTB, INTC, INTD, INTA}, /* IDSEL 12 - PCI slot 2 (left) */ - [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot 1 (right) */ + [12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */ + [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */ }; struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { diff --git a/arch/mips/au1000/xxs1500/Makefile b/arch/mips/au1000/xxs1500/Makefile index 44d7f7056ae7..db3c526f64d8 100644 --- a/arch/mips/au1000/xxs1500/Makefile +++ b/arch/mips/au1000/xxs1500/Makefile @@ -1,7 +1,6 @@ # # Copyright 2003 MontaVista Software Inc. -# Author: MontaVista Software, Inc. -# ppopov@mvista.com or source@mvista.com +# Author: MontaVista Software, Inc. <source@mvista.com> # # Makefile for MyCable XXS1500 board. # diff --git a/arch/mips/au1000/xxs1500/board_setup.c b/arch/mips/au1000/xxs1500/board_setup.c index 79d1798621bf..4c587acac5c3 100644 --- a/arch/mips/au1000/xxs1500/board_setup.c +++ b/arch/mips/au1000/xxs1500/board_setup.c @@ -1,7 +1,6 @@ /* - * Copyright 2000-2003 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com + * Copyright 2000-2003, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -39,40 +38,40 @@ void __init board_setup(void) { u32 pin_func; - // set multiple use pins (UART3/GPIO) to UART (it's used as UART too) - pin_func = au_readl(SYS_PINFUNC) & (u32)(~SYS_PF_UR3); + /* Set multiple use pins (UART3/GPIO) to UART (it's used as UART too) */ + pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_UR3; pin_func |= SYS_PF_UR3; au_writel(pin_func, SYS_PINFUNC); - // enable UART - au_writel(0x01, UART3_ADDR+UART_MOD_CNTRL); // clock enable (CE) + /* Enable UART */ + au_writel(0x01, UART3_ADDR + UART_MOD_CNTRL); /* clock enable (CE) */ mdelay(10); - au_writel(0x03, UART3_ADDR+UART_MOD_CNTRL); // CE and "enable" + au_writel(0x03, UART3_ADDR + UART_MOD_CNTRL); /* CE and "enable" */ mdelay(10); - // enable DTR = USB power up - au_writel(0x01, UART3_ADDR+UART_MCR); //? UART_MCR_DTR is 0x01??? + /* Enable DTR = USB power up */ + au_writel(0x01, UART3_ADDR + UART_MCR); /* UART_MCR_DTR is 0x01??? */ #ifdef CONFIG_PCMCIA_XXS1500 - /* setup pcmcia signals */ + /* Setup PCMCIA signals */ au_writel(0, SYS_PININPUTEN); - /* gpio 0, 1, and 4 are inputs */ - au_writel(1 | (1<<1) | (1<<4), SYS_TRIOUTCLR); + /* GPIO 0, 1, and 4 are inputs */ + au_writel(1 | (1 << 1) | (1 << 4), SYS_TRIOUTCLR); - /* enable GPIO2 if not already enabled */ + /* Enable GPIO2 if not already enabled */ au_writel(1, GPIO2_ENABLE); - /* gpio2 208/9/10/11 are inputs */ - au_writel((1<<8) | (1<<9) | (1<<10) | (1<<11), GPIO2_DIR); + /* GPIO2 208/9/10/11 are inputs */ + au_writel((1 << 8) | (1 << 9) | (1 << 10) | (1 << 11), GPIO2_DIR); - /* turn off power */ - au_writel((au_readl(GPIO2_PINSTATE) & ~(1<<14))|(1<<30), GPIO2_OUTPUT); + /* Turn off power */ + au_writel((au_readl(GPIO2_PINSTATE) & ~(1 << 14)) | (1 << 30), + GPIO2_OUTPUT); #endif - #ifdef CONFIG_PCI #if defined(__MIPSEB__) - au_writel(0xf | (2<<6) | (1<<4), Au1500_PCI_CFG); + au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG); #else au_writel(0xf, Au1500_PCI_CFG); #endif diff --git a/arch/mips/au1000/xxs1500/init.c b/arch/mips/au1000/xxs1500/init.c index 24fc6e132dc0..b849bf501c04 100644 --- a/arch/mips/au1000/xxs1500/init.c +++ b/arch/mips/au1000/xxs1500/init.c @@ -2,9 +2,8 @@ * BRIEF MODULE DESCRIPTION * XXS1500 board setup * - * Copyright 2003 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com + * Copyright 2003, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -45,8 +44,8 @@ void __init prom_init(void) unsigned long memsize; prom_argc = fw_arg0; - prom_argv = (char **) fw_arg1; - prom_envp = (char **) fw_arg2; + prom_argv = (char **)fw_arg1; + prom_envp = (char **)fw_arg2; prom_init_cmdline(); @@ -54,6 +53,6 @@ void __init prom_init(void) if (!memsize_str) memsize = 0x04000000; else - memsize = simple_strtol(memsize_str, NULL, 0); + memsize = strict_strtol(memsize_str, 0, NULL); add_memory_region(0, memsize, BOOT_MEM_RAM); } diff --git a/arch/mips/au1000/xxs1500/irqmap.c b/arch/mips/au1000/xxs1500/irqmap.c index dd6e3d1eb4d4..edf06ed11870 100644 --- a/arch/mips/au1000/xxs1500/irqmap.c +++ b/arch/mips/au1000/xxs1500/irqmap.c @@ -31,7 +31,7 @@ #include <asm/mach-au1x00/au1000.h> struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { - { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0}, + { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 }, { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 }, { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 }, { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 }, diff --git a/arch/mips/emma2rh/markeins/setup.c b/arch/mips/emma2rh/markeins/setup.c index 82f9e9013e70..62bfb455d1b1 100644 --- a/arch/mips/emma2rh/markeins/setup.c +++ b/arch/mips/emma2rh/markeins/setup.c @@ -76,7 +76,9 @@ static void markeins_machine_power_off(void) while (1) ; } -static unsigned long clock[4] = { 166500000, 187312500, 199800000, 210600000 }; +static unsigned long __initdata emma2rh_clock[4] = { + 166500000, 187312500, 199800000, 210600000 +}; static unsigned int __init detect_bus_frequency(unsigned long rtc_base) { @@ -85,7 +87,8 @@ static unsigned int __init detect_bus_frequency(unsigned long rtc_base) /* detect from boot strap */ reg = emma2rh_in32(EMMA2RH_BHIF_STRAP_0); reg = (reg >> 4) & 0x3; - return clock[reg]; + + return emma2rh_clock[reg]; } void __init plat_time_init(void) diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 45545be3eb86..cc0244036aec 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -56,9 +56,9 @@ obj-$(CONFIG_MIPS_MT_SMP) += smp-mt.o obj-$(CONFIG_MIPS_CMP) += smp-cmp.o obj-$(CONFIG_CPU_MIPSR2) += spram.o -obj-$(CONFIG_MIPS_APSP_KSPD) += kspd.o obj-$(CONFIG_MIPS_VPE_LOADER) += vpe.o obj-$(CONFIG_MIPS_VPE_APSP_API) += rtlx.o +obj-$(CONFIG_MIPS_APSP_KSPD) += kspd.o obj-$(CONFIG_I8259) += i8259.o obj-$(CONFIG_IRQ_CPU) += irq_cpu.o diff --git a/arch/mips/kernel/cpu-bugs64.c b/arch/mips/kernel/cpu-bugs64.c index a1b48af0992f..02b7713cf71c 100644 --- a/arch/mips/kernel/cpu-bugs64.c +++ b/arch/mips/kernel/cpu-bugs64.c @@ -38,7 +38,7 @@ static inline void align_mod(const int align, const int mod) ".endr\n\t" ".set pop" : - : GCC_IMM_ASM(align), GCC_IMM_ASM(mod)); + : GCC_IMM_ASM() (align), GCC_IMM_ASM() (mod)); } static inline void mult_sh_align_mod(long *v1, long *v2, long *w, diff --git a/arch/mips/kernel/irixelf.c b/arch/mips/kernel/irixelf.c index 290d8e3a664d..469c7237e5ba 100644 --- a/arch/mips/kernel/irixelf.c +++ b/arch/mips/kernel/irixelf.c @@ -578,7 +578,7 @@ static inline int map_interpreter(struct elf_phdr *epp, struct elfhdr *ihp, * process and the system, here we map the page and fill the * structure */ -static void irix_map_prda_page(void) +static int irix_map_prda_page(void) { unsigned long v; struct prda *pp; @@ -587,8 +587,8 @@ static void irix_map_prda_page(void) v = do_brk(PRDA_ADDRESS, PAGE_SIZE); up_write(¤t->mm->mmap_sem); - if (v < 0) - return; + if (v != PRDA_ADDRESS) + return v; /* v must be an error code */ pp = (struct prda *) v; pp->prda_sys.t_pid = task_pid_vnr(current); @@ -596,6 +596,8 @@ static void irix_map_prda_page(void) pp->prda_sys.t_rpid = task_pid_vnr(current); /* We leave the rest set to zero */ + + return 0; } @@ -781,7 +783,8 @@ static int load_irix_binary(struct linux_binprm * bprm, struct pt_regs * regs) * IRIX maps a page at 0x200000 which holds some system * information. Programs depend on this. */ - irix_map_prda_page(); + if (irix_map_prda_page()) + goto out_free_dentry; padzero(elf_bss); diff --git a/arch/mips/kernel/kspd.c b/arch/mips/kernel/kspd.c index ceb62dce1c9c..b0591ae0ce56 100644 --- a/arch/mips/kernel/kspd.c +++ b/arch/mips/kernel/kspd.c @@ -257,7 +257,7 @@ void sp_work_handle_request(void) vcwd = vpe_getcwd(tclimit); - /* change to the cwd of the process that loaded the SP program */ + /* change to cwd of the process that loaded the SP program */ old_fs = get_fs(); set_fs(KERNEL_DS); sys_chdir(vcwd); @@ -323,6 +323,9 @@ static void sp_cleanup(void) set >>= 1; } } + + /* Put daemon cwd back to root to avoid umount problems */ + sys_chdir("/"); } static int channel_open = 0; diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c index 0233798f7155..b88f1c18ff4d 100644 --- a/arch/mips/kernel/rtlx.c +++ b/arch/mips/kernel/rtlx.c @@ -72,6 +72,15 @@ static void rtlx_dispatch(void) static irqreturn_t rtlx_interrupt(int irq, void *dev_id) { int i; + unsigned int flags, vpeflags; + + /* Ought not to be strictly necessary for SMTC builds */ + local_irq_save(flags); + vpeflags = dvpe(); + set_c0_status(0x100 << MIPS_CPU_RTLX_IRQ); + irq_enable_hazard(); + evpe(vpeflags); + local_irq_restore(flags); for (i = 0; i < RTLX_CHANNELS; i++) { wake_up(&channel_wqs[i].lx_queue); @@ -108,7 +117,8 @@ static void __used dump_rtlx(void) static int rtlx_init(struct rtlx_info *rtlxi) { if (rtlxi->id != RTLX_ID) { - printk(KERN_ERR "no valid RTLX id at 0x%p 0x%lx\n", rtlxi, rtlxi->id); + printk(KERN_ERR "no valid RTLX id at 0x%p 0x%lx\n", + rtlxi, rtlxi->id); return -ENOEXEC; } @@ -162,18 +172,17 @@ int rtlx_open(int index, int can_sleep) if (rtlx == NULL) { if( (p = vpe_get_shared(tclimit)) == NULL) { - if (can_sleep) { - __wait_event_interruptible(channel_wqs[index].lx_queue, - (p = vpe_get_shared(tclimit)), - ret); - if (ret) - goto out_fail; - } else { - printk(KERN_DEBUG "No SP program loaded, and device " - "opened with O_NONBLOCK\n"); - ret = -ENOSYS; + if (can_sleep) { + __wait_event_interruptible(channel_wqs[index].lx_queue, + (p = vpe_get_shared(tclimit)), ret); + if (ret) goto out_fail; - } + } else { + printk(KERN_DEBUG "No SP program loaded, and device " + "opened with O_NONBLOCK\n"); + ret = -ENOSYS; + goto out_fail; + } } smp_rmb(); @@ -182,7 +191,9 @@ int rtlx_open(int index, int can_sleep) DEFINE_WAIT(wait); for (;;) { - prepare_to_wait(&channel_wqs[index].lx_queue, &wait, TASK_INTERRUPTIBLE); + prepare_to_wait( + &channel_wqs[index].lx_queue, + &wait, TASK_INTERRUPTIBLE); smp_rmb(); if (*p != NULL) break; @@ -195,7 +206,7 @@ int rtlx_open(int index, int can_sleep) } finish_wait(&channel_wqs[index].lx_queue, &wait); } else { - printk(" *vpe_get_shared is NULL. " + pr_err(" *vpe_get_shared is NULL. " "Has an SP program been loaded?\n"); ret = -ENOSYS; goto out_fail; @@ -203,8 +214,9 @@ int rtlx_open(int index, int can_sleep) } if ((unsigned int)*p < KSEG0) { - printk(KERN_WARNING "vpe_get_shared returned an invalid pointer " - "maybe an error code %d\n", (int)*p); + printk(KERN_WARNING "vpe_get_shared returned an " + "invalid pointer maybe an error code %d\n", + (int)*p); ret = -ENOSYS; goto out_fail; } @@ -232,6 +244,10 @@ out_ret: int rtlx_release(int index) { + if (rtlx == NULL) { + pr_err("rtlx_release() with null rtlx\n"); + return 0; + } rtlx->channel[index].lx_state = RTLX_STATE_UNUSED; return 0; } @@ -251,8 +267,8 @@ unsigned int rtlx_read_poll(int index, int can_sleep) int ret = 0; __wait_event_interruptible(channel_wqs[index].lx_queue, - chan->lx_read != chan->lx_write || sp_stopping, - ret); + (chan->lx_read != chan->lx_write) || + sp_stopping, ret); if (ret) return ret; @@ -282,7 +298,9 @@ static inline int write_spacefree(int read, int write, int size) unsigned int rtlx_write_poll(int index) { struct rtlx_channel *chan = &rtlx->channel[index]; - return write_spacefree(chan->rt_read, chan->rt_write, chan->buffer_size); + + return write_spacefree(chan->rt_read, chan->rt_write, + chan->buffer_size); } ssize_t rtlx_read(int index, void __user *buff, size_t count) @@ -344,8 +362,8 @@ ssize_t rtlx_write(int index, const void __user *buffer, size_t count) rt_read = rt->rt_read; /* total number of bytes to copy */ - count = min(count, - (size_t)write_spacefree(rt_read, rt->rt_write, rt->buffer_size)); + count = min(count, (size_t)write_spacefree(rt_read, rt->rt_write, + rt->buffer_size)); /* first bit from write pointer to the end of the buffer, or count */ fl = min(count, (size_t) rt->buffer_size - rt->rt_write); @@ -514,6 +532,11 @@ static int __init rtlx_module_init(void) if (cpu_has_vint) set_vi_handler(MIPS_CPU_RTLX_IRQ, rtlx_dispatch); + else { + pr_err("APRP RTLX init on non-vectored-interrupt processor\n"); + err = -ENODEV; + goto out_chrdev; + } rtlx_irq.dev_id = rtlx; setup_irq(rtlx_irq_num, &rtlx_irq); diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index 39f3dfe134fb..c6a063b2a0d9 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -331,6 +331,7 @@ static void __init bootmem_init(void) /* * Determine low and high memory ranges */ + max_pfn = max_low_pfn; if (max_low_pfn > PFN_DOWN(HIGHMEM_START)) { #ifdef CONFIG_HIGHMEM highstart_pfn = PFN_DOWN(HIGHMEM_START); diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index 33780cc61ce9..63370cdd3c90 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -87,8 +87,8 @@ struct plat_smp_ops *mp_ops; __cpuinit void register_smp_ops(struct plat_smp_ops *ops) { - if (ops) - printk(KERN_WARNING "Overriding previous set SMP ops\n"); + if (mp_ops) + printk(KERN_WARNING "Overriding previously set SMP ops\n"); mp_ops = ops; } diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index 39804c584edd..2794501ff302 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -269,7 +269,7 @@ static void *alloc_progmem(unsigned long len) * This means you must tell Linux to use less memory than you * physically have, for example by passing a mem= boot argument. */ - addr = pfn_to_kaddr(max_pfn); + addr = pfn_to_kaddr(max_low_pfn); memset(addr, 0, len); #else /* simple grab some mem for now */ @@ -781,10 +781,15 @@ static int vpe_run(struct vpe * v) /* take system out of configuration state */ clear_c0_mvpcontrol(MVPCONTROL_VPC); + /* + * SMTC/SMVP kernels manage VPE enable independently, + * but uniprocessor kernels need to turn it on, even + * if that wasn't the pre-dvpe() state. + */ #ifdef CONFIG_SMP - evpe(EVPE_ENABLE); -#else evpe(vpeflags); +#else + evpe(EVPE_ENABLE); #endif emt(dmt_flag); local_irq_restore(flags); @@ -840,7 +845,7 @@ static int vpe_elfload(struct vpe * v) /* Sanity checks against insmoding binaries or wrong arch, weird elf version */ - if (memcmp(hdr->e_ident, ELFMAG, 4) != 0 + if (memcmp(hdr->e_ident, ELFMAG, SELFMAG) != 0 || (hdr->e_type != ET_REL && hdr->e_type != ET_EXEC) || !elf_check_arch(hdr) || hdr->e_shentsize != sizeof(*sechdrs)) { @@ -947,12 +952,14 @@ static int vpe_elfload(struct vpe * v) struct elf_phdr *phdr = (struct elf_phdr *) ((char *)hdr + hdr->e_phoff); for (i = 0; i < hdr->e_phnum; i++) { - if (phdr->p_type != PT_LOAD) - continue; - - memcpy((void *)phdr->p_paddr, (char *)hdr + phdr->p_offset, phdr->p_filesz); - memset((void *)phdr->p_paddr + phdr->p_filesz, 0, phdr->p_memsz - phdr->p_filesz); - phdr++; + if (phdr->p_type == PT_LOAD) { + memcpy((void *)phdr->p_paddr, + (char *)hdr + phdr->p_offset, + phdr->p_filesz); + memset((void *)phdr->p_paddr + phdr->p_filesz, + 0, phdr->p_memsz - phdr->p_filesz); + } + phdr++; } for (i = 0; i < hdr->e_shnum; i++) { @@ -1107,7 +1114,7 @@ static int vpe_release(struct inode *inode, struct file *filp) return -ENODEV; hdr = (Elf_Ehdr *) v->pbuffer; - if (memcmp(hdr->e_ident, ELFMAG, 4) == 0) { + if (memcmp(hdr->e_ident, ELFMAG, SELFMAG) == 0) { if (vpe_elfload(v) >= 0) { vpe_run(v); } else { diff --git a/arch/mips/mm/highmem.c b/arch/mips/mm/highmem.c index 10dd2af2343b..8f2cd8eda741 100644 --- a/arch/mips/mm/highmem.c +++ b/arch/mips/mm/highmem.c @@ -116,4 +116,3 @@ EXPORT_SYMBOL(__kmap); EXPORT_SYMBOL(__kunmap); EXPORT_SYMBOL(__kmap_atomic); EXPORT_SYMBOL(__kunmap_atomic); -EXPORT_SYMBOL(__kmap_atomic_to_page); diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c index da8cbb6899dc..b40df7d2cf44 100644 --- a/arch/mips/oprofile/op_model_mipsxx.c +++ b/arch/mips/oprofile/op_model_mipsxx.c @@ -281,7 +281,7 @@ static inline int n_counters(void) static void reset_counters(void *arg) { - int counters = (int)arg; + int counters = (int)(long)arg; switch (counters) { case 4: w_c0_perfctrl3(0); @@ -313,7 +313,7 @@ static int __init mipsxx_init(void) if (!cpu_has_mipsmt_pertccounters) counters = counters_total_to_per_cpu(counters); #endif - on_each_cpu(reset_counters, (void *)counters, 0, 1); + on_each_cpu(reset_counters, (void *)(long)counters, 0, 1); op_model_mipsxx_ops.num_counters = counters; switch (current_cpu_type()) { @@ -382,7 +382,7 @@ static void mipsxx_exit(void) int counters = op_model_mipsxx_ops.num_counters; counters = counters_per_cpu_to_total(counters); - on_each_cpu(reset_counters, (void *)counters, 0, 1); + on_each_cpu(reset_counters, (void *)(long)counters, 0, 1); perf_irq = save_perf_irq; } diff --git a/arch/mips/pci/fixup-au1000.c b/arch/mips/pci/fixup-au1000.c index 00c36c9dbe0e..e2ddfc49237c 100644 --- a/arch/mips/pci/fixup-au1000.c +++ b/arch/mips/pci/fixup-au1000.c @@ -1,10 +1,9 @@ /* * BRIEF MODULE DESCRIPTION - * Board specific pci fixups. + * Board specific PCI fixups. * - * Copyright 2001-2003 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com + * Copyright 2001-2003, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the diff --git a/arch/mips/pci/ops-au1000.c b/arch/mips/pci/ops-au1000.c index 1314bd58f036..9a57c5ab91dd 100644 --- a/arch/mips/pci/ops-au1000.c +++ b/arch/mips/pci/ops-au1000.c @@ -1,10 +1,9 @@ /* * BRIEF MODULE DESCRIPTION - * Alchemy/AMD Au1x00 PCI support. + * Alchemy/AMD Au1xx0 PCI support. * - * Copyright 2001-2003, 2007 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com + * Copyright 2001-2003, 2007-2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> * * Support for all devices (greater than 16) added by David Gathright. * @@ -28,6 +27,7 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ + #include <linux/types.h> #include <linux/pci.h> #include <linux/kernel.h> @@ -36,9 +36,9 @@ #include <asm/mach-au1x00/au1000.h> -#undef DEBUG -#ifdef DEBUG -#define DBG(x...) printk(x) +#undef DEBUG +#ifdef DEBUG +#define DBG(x...) printk(KERN_DEBUG x) #else #define DBG(x...) #endif @@ -46,7 +46,6 @@ #define PCI_ACCESS_READ 0 #define PCI_ACCESS_WRITE 1 - int (*board_pci_idsel)(unsigned int devsel, int assert); void mod_wired_entry(int entry, unsigned long entrylo0, @@ -92,10 +91,9 @@ void __init au1x_pci_cfg_init(void) } static int config_access(unsigned char access_type, struct pci_bus *bus, - unsigned int dev_fn, unsigned char where, - u32 * data) + unsigned int dev_fn, unsigned char where, u32 *data) { -#if defined( CONFIG_SOC_AU1500 ) || defined( CONFIG_SOC_AU1550 ) +#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550) unsigned int device = PCI_SLOT(dev_fn); unsigned int function = PCI_FUNC(dev_fn); unsigned long offset, status; @@ -114,38 +112,36 @@ static int config_access(unsigned char access_type, struct pci_bus *bus, Au1500_PCI_STATCMD); au_sync_udelay(1); - /* Allow board vendors to implement their own off-chip idsel. + /* + * Allow board vendors to implement their own off-chip IDSEL. * If it doesn't succeed, may as well bail out at this point. */ - if (board_pci_idsel) { - if (board_pci_idsel(device, 1) == 0) { - *data = 0xffffffff; - local_irq_restore(flags); - return -1; - } + if (board_pci_idsel && board_pci_idsel(device, 1) == 0) { + *data = 0xffffffff; + local_irq_restore(flags); + return -1; } - /* setup the config window */ - if (bus->number == 0) { - cfg_base = ((1<<device)<<11); - } else { - cfg_base = 0x80000000 | (bus->number<<16) | (device<<11); - } + /* Setup the config window */ + if (bus->number == 0) + cfg_base = (1 << device) << 11; + else + cfg_base = 0x80000000 | (bus->number << 16) | (device << 11); - /* setup the lower bits of the 36 bit address */ - offset = (function << 8) | (where & ~0x3); - /* pick up any address that falls below the page mask */ + /* Setup the lower bits of the 36-bit address */ + offset = (function << 8) | (where & ~0x3); + /* Pick up any address that falls below the page mask */ offset |= cfg_base & ~PAGE_MASK; - /* page boundary */ + /* Page boundary */ cfg_base = cfg_base & PAGE_MASK; /* * To improve performance, if the current device is the same as * the last device accessed, we don't touch the TLB. */ - entryLo0 = (6 << 26) | (cfg_base >> 6) | (2 << 3) | 7; - entryLo1 = (6 << 26) | (cfg_base >> 6) | (0x1000 >> 6) | (2 << 3) | 7; + entryLo0 = (6 << 26) | (cfg_base >> 6) | (2 << 3) | 7; + entryLo1 = (6 << 26) | (cfg_base >> 6) | (0x1000 >> 6) | (2 << 3) | 7; if ((entryLo0 != last_entryLo0) || (entryLo1 != last_entryLo1)) { mod_wired_entry(pci_cfg_wired_entry, entryLo0, entryLo1, (unsigned long)pci_cfg_vm->addr, PM_4K); @@ -153,38 +149,37 @@ static int config_access(unsigned char access_type, struct pci_bus *bus, last_entryLo1 = entryLo1; } - if (access_type == PCI_ACCESS_WRITE) { + if (access_type == PCI_ACCESS_WRITE) au_writel(*data, (int)(pci_cfg_vm->addr + offset)); - } else { + else *data = au_readl((int)(pci_cfg_vm->addr + offset)); - } + au_sync_udelay(2); - DBG("cfg_access %d bus->number %d dev %d at %x *data %x conf %x\n", - access_type, bus->number, device, where, *data, offset); + DBG("cfg_access %d bus->number %u dev %u at %x *data %x conf %lx\n", + access_type, bus->number, device, where, *data, offset); - /* check master abort */ + /* Check master abort */ status = au_readl(Au1500_PCI_STATCMD); - if (status & (1<<29)) { + if (status & (1 << 29)) { *data = 0xffffffff; error = -1; DBG("Au1x Master Abort\n"); } else if ((status >> 28) & 0xf) { - DBG("PCI ERR detected: device %d, status %x\n", device, ((status >> 28) & 0xf)); + DBG("PCI ERR detected: device %u, status %lx\n", + device, (status >> 28) & 0xf); - /* clear errors */ + /* Clear errors */ au_writel(status & 0xf000ffff, Au1500_PCI_STATCMD); *data = 0xffffffff; error = -1; } - /* Take away the idsel. - */ - if (board_pci_idsel) { + /* Take away the IDSEL. */ + if (board_pci_idsel) (void)board_pci_idsel(device, 0); - } local_irq_restore(flags); return error; @@ -192,7 +187,7 @@ static int config_access(unsigned char access_type, struct pci_bus *bus, } static int read_config_byte(struct pci_bus *bus, unsigned int devfn, - int where, u8 * val) + int where, u8 *val) { u32 data; int ret; @@ -206,9 +201,8 @@ static int read_config_byte(struct pci_bus *bus, unsigned int devfn, return ret; } - static int read_config_word(struct pci_bus *bus, unsigned int devfn, - int where, u16 * val) + int where, u16 *val) { u32 data; int ret; @@ -221,7 +215,7 @@ static int read_config_word(struct pci_bus *bus, unsigned int devfn, } static int read_config_dword(struct pci_bus *bus, unsigned int devfn, - int where, u32 * val) + int where, u32 *val) { int ret; @@ -229,9 +223,8 @@ static int read_config_dword(struct pci_bus *bus, unsigned int devfn, return ret; } -static int -write_config_byte(struct pci_bus *bus, unsigned int devfn, int where, - u8 val) +static int write_config_byte(struct pci_bus *bus, unsigned int devfn, + int where, u8 val) { u32 data = 0; @@ -239,7 +232,7 @@ write_config_byte(struct pci_bus *bus, unsigned int devfn, int where, return -1; data = (data & ~(0xff << ((where & 3) << 3))) | - (val << ((where & 3) << 3)); + (val << ((where & 3) << 3)); if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data)) return -1; @@ -247,9 +240,8 @@ write_config_byte(struct pci_bus *bus, unsigned int devfn, int where, return PCIBIOS_SUCCESSFUL; } -static int -write_config_word(struct pci_bus *bus, unsigned int devfn, int where, - u16 val) +static int write_config_word(struct pci_bus *bus, unsigned int devfn, + int where, u16 val) { u32 data = 0; @@ -257,18 +249,16 @@ write_config_word(struct pci_bus *bus, unsigned int devfn, int where, return -1; data = (data & ~(0xffff << ((where & 3) << 3))) | - (val << ((where & 3) << 3)); + (val << ((where & 3) << 3)); if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data)) return -1; - return PCIBIOS_SUCCESSFUL; } -static int -write_config_dword(struct pci_bus *bus, unsigned int devfn, int where, - u32 val) +static int write_config_dword(struct pci_bus *bus, unsigned int devfn, + int where, u32 val) { if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &val)) return -1; @@ -277,18 +267,20 @@ write_config_dword(struct pci_bus *bus, unsigned int devfn, int where, } static int config_read(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 * val) + int where, int size, u32 *val) { switch (size) { case 1: { u8 _val; int rc = read_config_byte(bus, devfn, where, &_val); + *val = _val; return rc; } - case 2: { + case 2: { u16 _val; int rc = read_config_word(bus, devfn, where, &_val); + *val = _val; return rc; } @@ -310,7 +302,6 @@ static int config_write(struct pci_bus *bus, unsigned int devfn, } } - struct pci_ops au1x_pci_ops = { config_read, config_write diff --git a/arch/mips/pmc-sierra/msp71xx/msp_hwbutton.c b/arch/mips/pmc-sierra/msp71xx/msp_hwbutton.c index ab96a2d7f4c4..11769b55438c 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_hwbutton.c +++ b/arch/mips/pmc-sierra/msp71xx/msp_hwbutton.c @@ -126,9 +126,6 @@ static irqreturn_t hwbutton_handler(int irq, void *data) struct hwbutton_interrupt *hirq = data; unsigned long cic_ext = *CIC_EXT_CFG_REG; - if (irq != hirq->irq) - return IRQ_NONE; - if (CIC_EXT_IS_ACTIVE_HI(cic_ext, hirq->eirq)) { /* Interrupt: pin is now HI */ CIC_EXT_SET_ACTIVE_LO(cic_ext, hirq->eirq); @@ -164,7 +161,7 @@ static int msp_hwbutton_register(struct hwbutton_interrupt *hirq) *CIC_EXT_CFG_REG = cic_ext; return request_irq(hirq->irq, hwbutton_handler, IRQF_DISABLED, - hirq->name, (void *)hirq); + hirq->name, hirq); } static int __init msp_hwbutton_setup(void) diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c index 25d3baf0ebc4..9cebc9e7da63 100644 --- a/arch/mips/sgi-ip27/ip27-timer.c +++ b/arch/mips/sgi-ip27/ip27-timer.c @@ -158,7 +158,7 @@ static void rt_set_mode(enum clock_event_mode mode, } } -unsigned int rt_timer_irq; +int rt_timer_irq; static irqreturn_t hub_rt_counter_handler(int irq, void *dev_id) { @@ -219,7 +219,7 @@ static void __cpuinit hub_rt_clock_event_init(void) static void __init hub_rt_clock_event_global_init(void) { - unsigned int irq; + int irq; do { smp_wmb(); diff --git a/drivers/i2c/busses/i2c-au1550.c b/drivers/i2c/busses/i2c-au1550.c index 491718fe46b7..cae9dc89d88c 100644 --- a/drivers/i2c/busses/i2c-au1550.c +++ b/drivers/i2c/busses/i2c-au1550.c @@ -335,7 +335,7 @@ i2c_au1550_probe(struct platform_device *pdev) goto out_mem; } - priv->psc_base = r->start; + priv->psc_base = CKSEG1ADDR(r->start); priv->xfer_timeout = 200; priv->ack_timeout = 200; diff --git a/include/asm-mips/bitops.h b/include/asm-mips/bitops.h index c2bd126c3b4e..642724734eba 100644 --- a/include/asm-mips/bitops.h +++ b/include/asm-mips/bitops.h @@ -558,11 +558,13 @@ static inline void __clear_bit_unlock(unsigned long nr, volatile unsigned long * __clear_bit(nr, addr); } +#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) + /* * Return the bit position (0..63) of the most significant 1 bit in a word * Returns -1 if no 1 bit exists */ -static inline int __ilog2(unsigned long x) +static inline unsigned long __fls(unsigned long x) { int lz; @@ -591,13 +593,6 @@ static inline int __ilog2(unsigned long x) return 63 - lz; } -static inline unsigned long __fls(unsigned long x) -{ - return __ilog2(x); -} - -#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) - /* * __ffs - find first bit in word. * @word: The word to search @@ -607,7 +602,7 @@ static inline unsigned long __fls(unsigned long x) */ static inline unsigned long __ffs(unsigned long word) { - return __ilog2(word & -word); + return __fls(word & -word); } /* @@ -654,6 +649,7 @@ static inline int ffs(int word) #else #include <asm-generic/bitops/__ffs.h> +#include <asm-generic/bitops/__fls.h> #include <asm-generic/bitops/ffs.h> #include <asm-generic/bitops/fls.h> #include <asm-generic/bitops/fls64.h> diff --git a/include/asm-mips/compiler.h b/include/asm-mips/compiler.h index aa6b876bbd78..71f5c5cfc58a 100644 --- a/include/asm-mips/compiler.h +++ b/include/asm-mips/compiler.h @@ -9,10 +9,10 @@ #define _ASM_COMPILER_H #if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4) -#define GCC_IMM_ASM "n" +#define GCC_IMM_ASM() "n" #define GCC_REG_ACCUM "$0" #else -#define GCC_IMM_ASM "rn" +#define GCC_IMM_ASM() "rn" #define GCC_REG_ACCUM "accum" #endif diff --git a/include/asm-mips/mach-au1x00/au1000.h b/include/asm-mips/mach-au1x00/au1000.h index a05555165d05..363a14ee0ae5 100644 --- a/include/asm-mips/mach-au1x00/au1000.h +++ b/include/asm-mips/mach-au1x00/au1000.h @@ -40,8 +40,8 @@ #include <linux/delay.h> #include <linux/types.h> -#include <asm/io.h> -#include <asm/irq.h> +#include <linux/io.h> +#include <linux/irq.h> /* cpu pipeline flush */ void static inline au_sync(void) @@ -63,32 +63,32 @@ void static inline au_sync_delay(int ms) void static inline au_writeb(u8 val, unsigned long reg) { - *(volatile u8 *)(reg) = val; + *(volatile u8 *)reg = val; } void static inline au_writew(u16 val, unsigned long reg) { - *(volatile u16 *)(reg) = val; + *(volatile u16 *)reg = val; } void static inline au_writel(u32 val, unsigned long reg) { - *(volatile u32 *)(reg) = val; + *(volatile u32 *)reg = val; } static inline u8 au_readb(unsigned long reg) { - return (*(volatile u8 *)reg); + return *(volatile u8 *)reg; } static inline u16 au_readw(unsigned long reg) { - return (*(volatile u16 *)reg); + return *(volatile u16 *)reg; } static inline u32 au_readl(unsigned long reg) { - return (*(volatile u32 *)reg); + return *(volatile u32 *)reg; } @@ -117,76 +117,77 @@ extern struct au1xxx_irqmap au1xxx_irq_map[]; #endif /* !defined (_LANGUAGE_ASSEMBLY) */ /* - * SDRAM Register Offsets + * SDRAM register offsets */ -#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1100) -#define MEM_SDMODE0 (0x0000) -#define MEM_SDMODE1 (0x0004) -#define MEM_SDMODE2 (0x0008) -#define MEM_SDADDR0 (0x000C) -#define MEM_SDADDR1 (0x0010) -#define MEM_SDADDR2 (0x0014) -#define MEM_SDREFCFG (0x0018) -#define MEM_SDPRECMD (0x001C) -#define MEM_SDAUTOREF (0x0020) -#define MEM_SDWRMD0 (0x0024) -#define MEM_SDWRMD1 (0x0028) -#define MEM_SDWRMD2 (0x002C) -#define MEM_SDSLEEP (0x0030) -#define MEM_SDSMCKE (0x0034) +#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || \ + defined(CONFIG_SOC_AU1100) +#define MEM_SDMODE0 0x0000 +#define MEM_SDMODE1 0x0004 +#define MEM_SDMODE2 0x0008 +#define MEM_SDADDR0 0x000C +#define MEM_SDADDR1 0x0010 +#define MEM_SDADDR2 0x0014 +#define MEM_SDREFCFG 0x0018 +#define MEM_SDPRECMD 0x001C +#define MEM_SDAUTOREF 0x0020 +#define MEM_SDWRMD0 0x0024 +#define MEM_SDWRMD1 0x0028 +#define MEM_SDWRMD2 0x002C +#define MEM_SDSLEEP 0x0030 +#define MEM_SDSMCKE 0x0034 /* * MEM_SDMODE register content definitions */ -#define MEM_SDMODE_F (1<<22) -#define MEM_SDMODE_SR (1<<21) -#define MEM_SDMODE_BS (1<<20) -#define MEM_SDMODE_RS (3<<18) -#define MEM_SDMODE_CS (7<<15) -#define MEM_SDMODE_TRAS (15<<11) -#define MEM_SDMODE_TMRD (3<<9) -#define MEM_SDMODE_TWR (3<<7) -#define MEM_SDMODE_TRP (3<<5) -#define MEM_SDMODE_TRCD (3<<3) -#define MEM_SDMODE_TCL (7<<0) - -#define MEM_SDMODE_BS_2Bank (0<<20) -#define MEM_SDMODE_BS_4Bank (1<<20) -#define MEM_SDMODE_RS_11Row (0<<18) -#define MEM_SDMODE_RS_12Row (1<<18) -#define MEM_SDMODE_RS_13Row (2<<18) -#define MEM_SDMODE_RS_N(N) ((N)<<18) -#define MEM_SDMODE_CS_7Col (0<<15) -#define MEM_SDMODE_CS_8Col (1<<15) -#define MEM_SDMODE_CS_9Col (2<<15) -#define MEM_SDMODE_CS_10Col (3<<15) -#define MEM_SDMODE_CS_11Col (4<<15) -#define MEM_SDMODE_CS_N(N) ((N)<<15) -#define MEM_SDMODE_TRAS_N(N) ((N)<<11) -#define MEM_SDMODE_TMRD_N(N) ((N)<<9) -#define MEM_SDMODE_TWR_N(N) ((N)<<7) -#define MEM_SDMODE_TRP_N(N) ((N)<<5) -#define MEM_SDMODE_TRCD_N(N) ((N)<<3) -#define MEM_SDMODE_TCL_N(N) ((N)<<0) +#define MEM_SDMODE_F (1 << 22) +#define MEM_SDMODE_SR (1 << 21) +#define MEM_SDMODE_BS (1 << 20) +#define MEM_SDMODE_RS (3 << 18) +#define MEM_SDMODE_CS (7 << 15) +#define MEM_SDMODE_TRAS (15 << 11) +#define MEM_SDMODE_TMRD (3 << 9) +#define MEM_SDMODE_TWR (3 << 7) +#define MEM_SDMODE_TRP (3 << 5) +#define MEM_SDMODE_TRCD (3 << 3) +#define MEM_SDMODE_TCL (7 << 0) + +#define MEM_SDMODE_BS_2Bank (0 << 20) +#define MEM_SDMODE_BS_4Bank (1 << 20) +#define MEM_SDMODE_RS_11Row (0 << 18) +#define MEM_SDMODE_RS_12Row (1 << 18) +#define MEM_SDMODE_RS_13Row (2 << 18) +#define MEM_SDMODE_RS_N(N) ((N) << 18) +#define MEM_SDMODE_CS_7Col (0 << 15) +#define MEM_SDMODE_CS_8Col (1 << 15) +#define MEM_SDMODE_CS_9Col (2 << 15) +#define MEM_SDMODE_CS_10Col (3 << 15) +#define MEM_SDMODE_CS_11Col (4 << 15) +#define MEM_SDMODE_CS_N(N) ((N) << 15) +#define MEM_SDMODE_TRAS_N(N) ((N) << 11) +#define MEM_SDMODE_TMRD_N(N) ((N) << 9) +#define MEM_SDMODE_TWR_N(N) ((N) << 7) +#define MEM_SDMODE_TRP_N(N) ((N) << 5) +#define MEM_SDMODE_TRCD_N(N) ((N) << 3) +#define MEM_SDMODE_TCL_N(N) ((N) << 0) /* * MEM_SDADDR register contents definitions */ -#define MEM_SDADDR_E (1<<20) -#define MEM_SDADDR_CSBA (0x03FF<<10) -#define MEM_SDADDR_CSMASK (0x03FF<<0) -#define MEM_SDADDR_CSBA_N(N) ((N)&(0x03FF<<22)>>12) -#define MEM_SDADDR_CSMASK_N(N) ((N)&(0x03FF<<22)>>22) +#define MEM_SDADDR_E (1 << 20) +#define MEM_SDADDR_CSBA (0x03FF << 10) +#define MEM_SDADDR_CSMASK (0x03FF << 0) +#define MEM_SDADDR_CSBA_N(N) ((N) & (0x03FF << 22) >> 12) +#define MEM_SDADDR_CSMASK_N(N) ((N)&(0x03FF << 22) >> 22) /* * MEM_SDREFCFG register content definitions */ -#define MEM_SDREFCFG_TRC (15<<28) -#define MEM_SDREFCFG_TRPM (3<<26) -#define MEM_SDREFCFG_E (1<<25) -#define MEM_SDREFCFG_RE (0x1ffffff<<0) -#define MEM_SDREFCFG_TRC_N(N) ((N)<<MEM_SDREFCFG_TRC) -#define MEM_SDREFCFG_TRPM_N(N) ((N)<<MEM_SDREFCFG_TRPM) +#define MEM_SDREFCFG_TRC (15 << 28) +#define MEM_SDREFCFG_TRPM (3 << 26) +#define MEM_SDREFCFG_E (1 << 25) +#define MEM_SDREFCFG_RE (0x1ffffff << 0) +#define MEM_SDREFCFG_TRC_N(N) ((N) << MEM_SDREFCFG_TRC) +#define MEM_SDREFCFG_TRPM_N(N) ((N) << MEM_SDREFCFG_TRPM) #define MEM_SDREFCFG_REF_N(N) (N) #endif @@ -199,25 +200,25 @@ extern struct au1xxx_irqmap au1xxx_irq_map[]; /***********************************************************************/ #if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) -#define MEM_SDMODE0 (0x0800) -#define MEM_SDMODE1 (0x0808) -#define MEM_SDMODE2 (0x0810) -#define MEM_SDADDR0 (0x0820) -#define MEM_SDADDR1 (0x0828) -#define MEM_SDADDR2 (0x0830) -#define MEM_SDCONFIGA (0x0840) -#define MEM_SDCONFIGB (0x0848) -#define MEM_SDSTAT (0x0850) -#define MEM_SDERRADDR (0x0858) -#define MEM_SDSTRIDE0 (0x0860) -#define MEM_SDSTRIDE1 (0x0868) -#define MEM_SDSTRIDE2 (0x0870) -#define MEM_SDWRMD0 (0x0880) -#define MEM_SDWRMD1 (0x0888) -#define MEM_SDWRMD2 (0x0890) -#define MEM_SDPRECMD (0x08C0) -#define MEM_SDAUTOREF (0x08C8) -#define MEM_SDSREF (0x08D0) +#define MEM_SDMODE0 0x0800 +#define MEM_SDMODE1 0x0808 +#define MEM_SDMODE2 0x0810 +#define MEM_SDADDR0 0x0820 +#define MEM_SDADDR1 0x0828 +#define MEM_SDADDR2 0x0830 +#define MEM_SDCONFIGA 0x0840 +#define MEM_SDCONFIGB 0x0848 +#define MEM_SDSTAT 0x0850 +#define MEM_SDERRADDR 0x0858 +#define MEM_SDSTRIDE0 0x0860 +#define MEM_SDSTRIDE1 0x0868 +#define MEM_SDSTRIDE2 0x0870 +#define MEM_SDWRMD0 0x0880 +#define MEM_SDWRMD1 0x0888 +#define MEM_SDWRMD2 0x0890 +#define MEM_SDPRECMD 0x08C0 +#define MEM_SDAUTOREF 0x08C8 +#define MEM_SDSREF 0x08D0 #define MEM_SDSLEEP MEM_SDSREF #endif @@ -256,9 +257,9 @@ extern struct au1xxx_irqmap au1xxx_irq_map[]; #define SSI0_PHYS_ADDR 0x11600000 #define SSI1_PHYS_ADDR 0x11680000 #define SYS_PHYS_ADDR 0x11900000 -#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL -#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL -#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL +#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL +#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL +#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL #endif /********************************************************************/ @@ -290,13 +291,13 @@ extern struct au1xxx_irqmap au1xxx_irq_map[]; #define UART3_PHYS_ADDR 0x11400000 #define GPIO2_PHYS_ADDR 0x11700000 #define SYS_PHYS_ADDR 0x11900000 -#define PCI_MEM_PHYS_ADDR 0x400000000ULL -#define PCI_IO_PHYS_ADDR 0x500000000ULL -#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL -#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL -#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL -#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL -#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL +#define PCI_MEM_PHYS_ADDR 0x400000000ULL +#define PCI_IO_PHYS_ADDR 0x500000000ULL +#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL +#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL +#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL +#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL +#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL #endif /********************************************************************/ @@ -333,9 +334,9 @@ extern struct au1xxx_irqmap au1xxx_irq_map[]; #define GPIO2_PHYS_ADDR 0x11700000 #define SYS_PHYS_ADDR 0x11900000 #define LCD_PHYS_ADDR 0x15000000 -#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL -#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL -#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL +#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL +#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL +#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL #endif /***********************************************************************/ @@ -360,17 +361,17 @@ extern struct au1xxx_irqmap au1xxx_irq_map[]; #define SYS_PHYS_ADDR 0x11900000 #define DDMA_PHYS_ADDR 0x14002000 #define PE_PHYS_ADDR 0x14008000 -#define PSC0_PHYS_ADDR 0x11A00000 -#define PSC1_PHYS_ADDR 0x11B00000 -#define PSC2_PHYS_ADDR 0x10A00000 -#define PSC3_PHYS_ADDR 0x10B00000 -#define PCI_MEM_PHYS_ADDR 0x400000000ULL -#define PCI_IO_PHYS_ADDR 0x500000000ULL -#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL -#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL -#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL -#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL -#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL +#define PSC0_PHYS_ADDR 0x11A00000 +#define PSC1_PHYS_ADDR 0x11B00000 +#define PSC2_PHYS_ADDR 0x10A00000 +#define PSC3_PHYS_ADDR 0x10B00000 +#define PCI_MEM_PHYS_ADDR 0x400000000ULL +#define PCI_IO_PHYS_ADDR 0x500000000ULL +#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL +#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL +#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL +#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL +#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL #endif /***********************************************************************/ @@ -397,122 +398,121 @@ extern struct au1xxx_irqmap au1xxx_irq_map[]; #define SWCNT_PHYS_ADDR 0x1110010C #define MAEFE_PHYS_ADDR 0x14012000 #define MAEBE_PHYS_ADDR 0x14010000 -#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL -#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL -#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL +#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL +#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL +#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL #endif - /* Static Bus Controller */ -#define MEM_STCFG0 0xB4001000 -#define MEM_STTIME0 0xB4001004 -#define MEM_STADDR0 0xB4001008 +#define MEM_STCFG0 0xB4001000 +#define MEM_STTIME0 0xB4001004 +#define MEM_STADDR0 0xB4001008 -#define MEM_STCFG1 0xB4001010 -#define MEM_STTIME1 0xB4001014 -#define MEM_STADDR1 0xB4001018 +#define MEM_STCFG1 0xB4001010 +#define MEM_STTIME1 0xB4001014 +#define MEM_STADDR1 0xB4001018 -#define MEM_STCFG2 0xB4001020 -#define MEM_STTIME2 0xB4001024 -#define MEM_STADDR2 0xB4001028 +#define MEM_STCFG2 0xB4001020 +#define MEM_STTIME2 0xB4001024 +#define MEM_STADDR2 0xB4001028 -#define MEM_STCFG3 0xB4001030 -#define MEM_STTIME3 0xB4001034 -#define MEM_STADDR3 0xB4001038 +#define MEM_STCFG3 0xB4001030 +#define MEM_STTIME3 0xB4001034 +#define MEM_STADDR3 0xB4001038 #if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) -#define MEM_STNDCTL 0xB4001100 -#define MEM_STSTAT 0xB4001104 +#define MEM_STNDCTL 0xB4001100 +#define MEM_STSTAT 0xB4001104 -#define MEM_STNAND_CMD (0x0) -#define MEM_STNAND_ADDR (0x4) -#define MEM_STNAND_DATA (0x20) +#define MEM_STNAND_CMD 0x0 +#define MEM_STNAND_ADDR 0x4 +#define MEM_STNAND_DATA 0x20 #endif /* Interrupt Controller 0 */ -#define IC0_CFG0RD 0xB0400040 -#define IC0_CFG0SET 0xB0400040 -#define IC0_CFG0CLR 0xB0400044 +#define IC0_CFG0RD 0xB0400040 +#define IC0_CFG0SET 0xB0400040 +#define IC0_CFG0CLR 0xB0400044 -#define IC0_CFG1RD 0xB0400048 -#define IC0_CFG1SET 0xB0400048 -#define IC0_CFG1CLR 0xB040004C +#define IC0_CFG1RD 0xB0400048 +#define IC0_CFG1SET 0xB0400048 +#define IC0_CFG1CLR 0xB040004C -#define IC0_CFG2RD 0xB0400050 -#define IC0_CFG2SET 0xB0400050 -#define IC0_CFG2CLR 0xB0400054 +#define IC0_CFG2RD 0xB0400050 +#define IC0_CFG2SET 0xB0400050 +#define IC0_CFG2CLR 0xB0400054 -#define IC0_REQ0INT 0xB0400054 -#define IC0_SRCRD 0xB0400058 -#define IC0_SRCSET 0xB0400058 -#define IC0_SRCCLR 0xB040005C -#define IC0_REQ1INT 0xB040005C +#define IC0_REQ0INT 0xB0400054 +#define IC0_SRCRD 0xB0400058 +#define IC0_SRCSET 0xB0400058 +#define IC0_SRCCLR 0xB040005C +#define IC0_REQ1INT 0xB040005C -#define IC0_ASSIGNRD 0xB0400060 -#define IC0_ASSIGNSET 0xB0400060 -#define IC0_ASSIGNCLR 0xB0400064 +#define IC0_ASSIGNRD 0xB0400060 +#define IC0_ASSIGNSET 0xB0400060 +#define IC0_ASSIGNCLR 0xB0400064 -#define IC0_WAKERD 0xB0400068 -#define IC0_WAKESET 0xB0400068 -#define IC0_WAKECLR 0xB040006C +#define IC0_WAKERD 0xB0400068 +#define IC0_WAKESET 0xB0400068 +#define IC0_WAKECLR 0xB040006C -#define IC0_MASKRD 0xB0400070 -#define IC0_MASKSET 0xB0400070 -#define IC0_MASKCLR 0xB0400074 +#define IC0_MASKRD 0xB0400070 +#define IC0_MASKSET 0xB0400070 +#define IC0_MASKCLR 0xB0400074 -#define IC0_RISINGRD 0xB0400078 -#define IC0_RISINGCLR 0xB0400078 -#define IC0_FALLINGRD 0xB040007C -#define IC0_FALLINGCLR 0xB040007C +#define IC0_RISINGRD 0xB0400078 +#define IC0_RISINGCLR 0xB0400078 +#define IC0_FALLINGRD 0xB040007C +#define IC0_FALLINGCLR 0xB040007C -#define IC0_TESTBIT 0xB0400080 +#define IC0_TESTBIT 0xB0400080 /* Interrupt Controller 1 */ -#define IC1_CFG0RD 0xB1800040 -#define IC1_CFG0SET 0xB1800040 -#define IC1_CFG0CLR 0xB1800044 +#define IC1_CFG0RD 0xB1800040 +#define IC1_CFG0SET 0xB1800040 +#define IC1_CFG0CLR 0xB1800044 -#define IC1_CFG1RD 0xB1800048 -#define IC1_CFG1SET 0xB1800048 -#define IC1_CFG1CLR 0xB180004C +#define IC1_CFG1RD 0xB1800048 +#define IC1_CFG1SET 0xB1800048 +#define IC1_CFG1CLR 0xB180004C -#define IC1_CFG2RD 0xB1800050 -#define IC1_CFG2SET 0xB1800050 -#define IC1_CFG2CLR 0xB1800054 +#define IC1_CFG2RD 0xB1800050 +#define IC1_CFG2SET 0xB1800050 +#define IC1_CFG2CLR 0xB1800054 -#define IC1_REQ0INT 0xB1800054 -#define IC1_SRCRD 0xB1800058 -#define IC1_SRCSET 0xB1800058 -#define IC1_SRCCLR 0xB180005C -#define IC1_REQ1INT 0xB180005C +#define IC1_REQ0INT 0xB1800054 +#define IC1_SRCRD 0xB1800058 +#define IC1_SRCSET 0xB1800058 +#define IC1_SRCCLR 0xB180005C +#define IC1_REQ1INT 0xB180005C -#define IC1_ASSIGNRD 0xB1800060 -#define IC1_ASSIGNSET 0xB1800060 -#define IC1_ASSIGNCLR 0xB1800064 +#define IC1_ASSIGNRD 0xB1800060 +#define IC1_ASSIGNSET 0xB1800060 +#define IC1_ASSIGNCLR 0xB1800064 -#define IC1_WAKERD 0xB1800068 -#define IC1_WAKESET 0xB1800068 -#define IC1_WAKECLR 0xB180006C +#define IC1_WAKERD 0xB1800068 +#define IC1_WAKESET 0xB1800068 +#define IC1_WAKECLR 0xB180006C -#define IC1_MASKRD 0xB1800070 -#define IC1_MASKSET 0xB1800070 -#define IC1_MASKCLR 0xB1800074 +#define IC1_MASKRD 0xB1800070 +#define IC1_MASKSET 0xB1800070 +#define IC1_MASKCLR 0xB1800074 -#define IC1_RISINGRD 0xB1800078 -#define IC1_RISINGCLR 0xB1800078 -#define IC1_FALLINGRD 0xB180007C -#define IC1_FALLINGCLR 0xB180007C +#define IC1_RISINGRD 0xB1800078 +#define IC1_RISINGCLR 0xB1800078 +#define IC1_FALLINGRD 0xB180007C +#define IC1_FALLINGCLR 0xB180007C -#define IC1_TESTBIT 0xB1800080 +#define IC1_TESTBIT 0xB1800080 /* Interrupt Configuration Modes */ -#define INTC_INT_DISABLED 0 -#define INTC_INT_RISE_EDGE 0x1 -#define INTC_INT_FALL_EDGE 0x2 -#define INTC_INT_RISE_AND_FALL_EDGE 0x3 -#define INTC_INT_HIGH_LEVEL 0x5 -#define INTC_INT_LOW_LEVEL 0x6 -#define INTC_INT_HIGH_AND_LOW_LEVEL 0x7 +#define INTC_INT_DISABLED 0x0 +#define INTC_INT_RISE_EDGE 0x1 +#define INTC_INT_FALL_EDGE 0x2 +#define INTC_INT_RISE_AND_FALL_EDGE 0x3 +#define INTC_INT_HIGH_LEVEL 0x5 +#define INTC_INT_LOW_LEVEL 0x6 +#define INTC_INT_HIGH_AND_LOW_LEVEL 0x7 /* Interrupt Numbers */ /* Au1000 */ @@ -579,18 +579,18 @@ enum soc_au1000_ints { AU1000_GPIO_31, }; -#define UART0_ADDR 0xB1100000 -#define UART1_ADDR 0xB1200000 -#define UART2_ADDR 0xB1300000 -#define UART3_ADDR 0xB1400000 +#define UART0_ADDR 0xB1100000 +#define UART1_ADDR 0xB1200000 +#define UART2_ADDR 0xB1300000 +#define UART3_ADDR 0xB1400000 -#define USB_OHCI_BASE 0x10100000 // phys addr for ioremap -#define USB_HOST_CONFIG 0xB017fffc +#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */ +#define USB_HOST_CONFIG 0xB017FFFC -#define AU1000_ETH0_BASE 0xB0500000 -#define AU1000_ETH1_BASE 0xB0510000 -#define AU1000_MAC0_ENABLE 0xB0520000 -#define AU1000_MAC1_ENABLE 0xB0520004 +#define AU1000_ETH0_BASE 0xB0500000 +#define AU1000_ETH1_BASE 0xB0510000 +#define AU1000_MAC0_ENABLE 0xB0520000 +#define AU1000_MAC1_ENABLE 0xB0520004 #define NUM_ETH_INTERFACES 2 #endif /* CONFIG_SOC_AU1000 */ @@ -662,16 +662,16 @@ enum soc_au1500_ints { #define INTC AU1000_PCI_INTC #define INTD AU1000_PCI_INTD -#define UART0_ADDR 0xB1100000 -#define UART3_ADDR 0xB1400000 +#define UART0_ADDR 0xB1100000 +#define UART3_ADDR 0xB1400000 -#define USB_OHCI_BASE 0x10100000 // phys addr for ioremap -#define USB_HOST_CONFIG 0xB017fffc +#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */ +#define USB_HOST_CONFIG 0xB017fffc -#define AU1500_ETH0_BASE 0xB1500000 -#define AU1500_ETH1_BASE 0xB1510000 -#define AU1500_MAC0_ENABLE 0xB1520000 -#define AU1500_MAC1_ENABLE 0xB1520004 +#define AU1500_ETH0_BASE 0xB1500000 +#define AU1500_ETH1_BASE 0xB1510000 +#define AU1500_MAC0_ENABLE 0xB1520000 +#define AU1500_MAC1_ENABLE 0xB1520004 #define NUM_ETH_INTERFACES 2 #endif /* CONFIG_SOC_AU1500 */ @@ -739,15 +739,15 @@ enum soc_au1100_ints { AU1000_GPIO_31, }; -#define UART0_ADDR 0xB1100000 -#define UART1_ADDR 0xB1200000 -#define UART3_ADDR 0xB1400000 +#define UART0_ADDR 0xB1100000 +#define UART1_ADDR 0xB1200000 +#define UART3_ADDR 0xB1400000 -#define USB_OHCI_BASE 0x10100000 // phys addr for ioremap -#define USB_HOST_CONFIG 0xB017fffc +#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */ +#define USB_HOST_CONFIG 0xB017FFFC -#define AU1100_ETH0_BASE 0xB0500000 -#define AU1100_MAC0_ENABLE 0xB0520000 +#define AU1100_ETH0_BASE 0xB0500000 +#define AU1100_MAC0_ENABLE 0xB0520000 #define NUM_ETH_INTERFACES 1 #endif /* CONFIG_SOC_AU1100 */ @@ -826,18 +826,18 @@ enum soc_au1550_ints { #define INTC AU1550_PCI_INTC #define INTD AU1550_PCI_INTD -#define UART0_ADDR 0xB1100000 -#define UART1_ADDR 0xB1200000 -#define UART3_ADDR 0xB1400000 +#define UART0_ADDR 0xB1100000 +#define UART1_ADDR 0xB1200000 +#define UART3_ADDR 0xB1400000 -#define USB_OHCI_BASE 0x14020000 // phys addr for ioremap -#define USB_OHCI_LEN 0x00060000 -#define USB_HOST_CONFIG 0xB4027ffc +#define USB_OHCI_BASE 0x14020000 /* phys addr for ioremap */ +#define USB_OHCI_LEN 0x00060000 +#define USB_HOST_CONFIG 0xB4027ffc -#define AU1550_ETH0_BASE 0xB0500000 -#define AU1550_ETH1_BASE 0xB0510000 -#define AU1550_MAC0_ENABLE 0xB0520000 -#define AU1550_MAC1_ENABLE 0xB0520004 +#define AU1550_ETH0_BASE 0xB0500000 +#define AU1550_ETH1_BASE 0xB0510000 +#define AU1550_MAC0_ENABLE 0xB0520000 +#define AU1550_MAC1_ENABLE 0xB0520004 #define NUM_ETH_INTERFACES 2 #endif /* CONFIG_SOC_AU1550 */ @@ -911,32 +911,32 @@ enum soc_au1200_ints { AU1000_GPIO_31, }; -#define UART0_ADDR 0xB1100000 -#define UART1_ADDR 0xB1200000 - -#define USB_UOC_BASE 0x14020020 -#define USB_UOC_LEN 0x20 -#define USB_OHCI_BASE 0x14020100 -#define USB_OHCI_LEN 0x100 -#define USB_EHCI_BASE 0x14020200 -#define USB_EHCI_LEN 0x100 -#define USB_UDC_BASE 0x14022000 -#define USB_UDC_LEN 0x2000 -#define USB_MSR_BASE 0xB4020000 -#define USB_MSR_MCFG 4 -#define USBMSRMCFG_OMEMEN 0 -#define USBMSRMCFG_OBMEN 1 -#define USBMSRMCFG_EMEMEN 2 -#define USBMSRMCFG_EBMEN 3 -#define USBMSRMCFG_DMEMEN 4 -#define USBMSRMCFG_DBMEN 5 -#define USBMSRMCFG_GMEMEN 6 -#define USBMSRMCFG_OHCCLKEN 16 -#define USBMSRMCFG_EHCCLKEN 17 -#define USBMSRMCFG_UDCCLKEN 18 -#define USBMSRMCFG_PHYPLLEN 19 -#define USBMSRMCFG_RDCOMB 30 -#define USBMSRMCFG_PFEN 31 +#define UART0_ADDR 0xB1100000 +#define UART1_ADDR 0xB1200000 + +#define USB_UOC_BASE 0x14020020 +#define USB_UOC_LEN 0x20 +#define USB_OHCI_BASE 0x14020100 +#define USB_OHCI_LEN 0x100 +#define USB_EHCI_BASE 0x14020200 +#define USB_EHCI_LEN 0x100 +#define USB_UDC_BASE 0x14022000 +#define USB_UDC_LEN 0x2000 +#define USB_MSR_BASE 0xB4020000 +#define USB_MSR_MCFG 4 +#define USBMSRMCFG_OMEMEN 0 +#define USBMSRMCFG_OBMEN 1 +#define USBMSRMCFG_EMEMEN 2 +#define USBMSRMCFG_EBMEN 3 +#define USBMSRMCFG_DMEMEN 4 +#define USBMSRMCFG_DBMEN 5 +#define USBMSRMCFG_GMEMEN 6 +#define USBMSRMCFG_OHCCLKEN 16 +#define USBMSRMCFG_EHCCLKEN 17 +#define USBMSRMCFG_UDCCLKEN 18 +#define USBMSRMCFG_PHYPLLEN 19 +#define USBMSRMCFG_RDCOMB 30 +#define USBMSRMCFG_PFEN 31 #endif /* CONFIG_SOC_AU1200 */ @@ -949,259 +949,258 @@ enum soc_au1200_ints { #define INTX 0xFF /* not valid */ /* Programmable Counters 0 and 1 */ -#define SYS_BASE 0xB1900000 -#define SYS_COUNTER_CNTRL (SYS_BASE + 0x14) -# define SYS_CNTRL_E1S (1<<23) -# define SYS_CNTRL_T1S (1<<20) -# define SYS_CNTRL_M21 (1<<19) -# define SYS_CNTRL_M11 (1<<18) -# define SYS_CNTRL_M01 (1<<17) -# define SYS_CNTRL_C1S (1<<16) -# define SYS_CNTRL_BP (1<<14) -# define SYS_CNTRL_EN1 (1<<13) -# define SYS_CNTRL_BT1 (1<<12) -# define SYS_CNTRL_EN0 (1<<11) -# define SYS_CNTRL_BT0 (1<<10) -# define SYS_CNTRL_E0 (1<<8) -# define SYS_CNTRL_E0S (1<<7) -# define SYS_CNTRL_32S (1<<5) -# define SYS_CNTRL_T0S (1<<4) -# define SYS_CNTRL_M20 (1<<3) -# define SYS_CNTRL_M10 (1<<2) -# define SYS_CNTRL_M00 (1<<1) -# define SYS_CNTRL_C0S (1<<0) +#define SYS_BASE 0xB1900000 +#define SYS_COUNTER_CNTRL (SYS_BASE + 0x14) +# define SYS_CNTRL_E1S (1 << 23) +# define SYS_CNTRL_T1S (1 << 20) +# define SYS_CNTRL_M21 (1 << 19) +# define SYS_CNTRL_M11 (1 << 18) +# define SYS_CNTRL_M01 (1 << 17) +# define SYS_CNTRL_C1S (1 << 16) +# define SYS_CNTRL_BP (1 << 14) +# define SYS_CNTRL_EN1 (1 << 13) +# define SYS_CNTRL_BT1 (1 << 12) +# define SYS_CNTRL_EN0 (1 << 11) +# define SYS_CNTRL_BT0 (1 << 10) +# define SYS_CNTRL_E0 (1 << 8) +# define SYS_CNTRL_E0S (1 << 7) +# define SYS_CNTRL_32S (1 << 5) +# define SYS_CNTRL_T0S (1 << 4) +# define SYS_CNTRL_M20 (1 << 3) +# define SYS_CNTRL_M10 (1 << 2) +# define SYS_CNTRL_M00 (1 << 1) +# define SYS_CNTRL_C0S (1 << 0) /* Programmable Counter 0 Registers */ -#define SYS_TOYTRIM (SYS_BASE + 0) -#define SYS_TOYWRITE (SYS_BASE + 4) -#define SYS_TOYMATCH0 (SYS_BASE + 8) -#define SYS_TOYMATCH1 (SYS_BASE + 0xC) -#define SYS_TOYMATCH2 (SYS_BASE + 0x10) -#define SYS_TOYREAD (SYS_BASE + 0x40) +#define SYS_TOYTRIM (SYS_BASE + 0) +#define SYS_TOYWRITE (SYS_BASE + 4) +#define SYS_TOYMATCH0 (SYS_BASE + 8) +#define SYS_TOYMATCH1 (SYS_BASE + 0xC) +#define SYS_TOYMATCH2 (SYS_BASE + 0x10) +#define SYS_TOYREAD (SYS_BASE + 0x40) /* Programmable Counter 1 Registers */ -#define SYS_RTCTRIM (SYS_BASE + 0x44) -#define SYS_RTCWRITE (SYS_BASE + 0x48) -#define SYS_RTCMATCH0 (SYS_BASE + 0x4C) -#define SYS_RTCMATCH1 (SYS_BASE + 0x50) -#define SYS_RTCMATCH2 (SYS_BASE + 0x54) -#define SYS_RTCREAD (SYS_BASE + 0x58) +#define SYS_RTCTRIM (SYS_BASE + 0x44) +#define SYS_RTCWRITE (SYS_BASE + 0x48) +#define SYS_RTCMATCH0 (SYS_BASE + 0x4C) +#define SYS_RTCMATCH1 (SYS_BASE + 0x50) +#define SYS_RTCMATCH2 (SYS_BASE + 0x54) +#define SYS_RTCREAD (SYS_BASE + 0x58) /* I2S Controller */ -#define I2S_DATA 0xB1000000 -# define I2S_DATA_MASK (0xffffff) -#define I2S_CONFIG 0xB1000004 -# define I2S_CONFIG_XU (1<<25) -# define I2S_CONFIG_XO (1<<24) -# define I2S_CONFIG_RU (1<<23) -# define I2S_CONFIG_RO (1<<22) -# define I2S_CONFIG_TR (1<<21) -# define I2S_CONFIG_TE (1<<20) -# define I2S_CONFIG_TF (1<<19) -# define I2S_CONFIG_RR (1<<18) -# define I2S_CONFIG_RE (1<<17) -# define I2S_CONFIG_RF (1<<16) -# define I2S_CONFIG_PD (1<<11) -# define I2S_CONFIG_LB (1<<10) -# define I2S_CONFIG_IC (1<<9) -# define I2S_CONFIG_FM_BIT 7 -# define I2S_CONFIG_FM_MASK (0x3 << I2S_CONFIG_FM_BIT) -# define I2S_CONFIG_FM_I2S (0x0 << I2S_CONFIG_FM_BIT) -# define I2S_CONFIG_FM_LJ (0x1 << I2S_CONFIG_FM_BIT) -# define I2S_CONFIG_FM_RJ (0x2 << I2S_CONFIG_FM_BIT) -# define I2S_CONFIG_TN (1<<6) -# define I2S_CONFIG_RN (1<<5) -# define I2S_CONFIG_SZ_BIT 0 -# define I2S_CONFIG_SZ_MASK (0x1F << I2S_CONFIG_SZ_BIT) - -#define I2S_CONTROL 0xB1000008 -# define I2S_CONTROL_D (1<<1) -# define I2S_CONTROL_CE (1<<0) +#define I2S_DATA 0xB1000000 +# define I2S_DATA_MASK 0xffffff +#define I2S_CONFIG 0xB1000004 +# define I2S_CONFIG_XU (1 << 25) +# define I2S_CONFIG_XO (1 << 24) +# define I2S_CONFIG_RU (1 << 23) +# define I2S_CONFIG_RO (1 << 22) +# define I2S_CONFIG_TR (1 << 21) +# define I2S_CONFIG_TE (1 << 20) +# define I2S_CONFIG_TF (1 << 19) +# define I2S_CONFIG_RR (1 << 18) +# define I2S_CONFIG_RE (1 << 17) +# define I2S_CONFIG_RF (1 << 16) +# define I2S_CONFIG_PD (1 << 11) +# define I2S_CONFIG_LB (1 << 10) +# define I2S_CONFIG_IC (1 << 9) +# define I2S_CONFIG_FM_BIT 7 +# define I2S_CONFIG_FM_MASK (0x3 << I2S_CONFIG_FM_BIT) +# define I2S_CONFIG_FM_I2S (0x0 << I2S_CONFIG_FM_BIT) +# define I2S_CONFIG_FM_LJ (0x1 << I2S_CONFIG_FM_BIT) +# define I2S_CONFIG_FM_RJ (0x2 << I2S_CONFIG_FM_BIT) +# define I2S_CONFIG_TN (1 << 6) +# define I2S_CONFIG_RN (1 << 5) +# define I2S_CONFIG_SZ_BIT 0 +# define I2S_CONFIG_SZ_MASK (0x1F << I2S_CONFIG_SZ_BIT) + +#define I2S_CONTROL 0xB1000008 +# define I2S_CONTROL_D (1 << 1) +# define I2S_CONTROL_CE (1 << 0) /* USB Host Controller */ #ifndef USB_OHCI_LEN -#define USB_OHCI_LEN 0x00100000 +#define USB_OHCI_LEN 0x00100000 #endif #ifndef CONFIG_SOC_AU1200 /* USB Device Controller */ -#define USBD_EP0RD 0xB0200000 -#define USBD_EP0WR 0xB0200004 -#define USBD_EP2WR 0xB0200008 -#define USBD_EP3WR 0xB020000C -#define USBD_EP4RD 0xB0200010 -#define USBD_EP5RD 0xB0200014 -#define USBD_INTEN 0xB0200018 -#define USBD_INTSTAT 0xB020001C -# define USBDEV_INT_SOF (1<<12) -# define USBDEV_INT_HF_BIT 6 -# define USBDEV_INT_HF_MASK (0x3f << USBDEV_INT_HF_BIT) -# define USBDEV_INT_CMPLT_BIT 0 +#define USBD_EP0RD 0xB0200000 +#define USBD_EP0WR 0xB0200004 +#define USBD_EP2WR 0xB0200008 +#define USBD_EP3WR 0xB020000C +#define USBD_EP4RD 0xB0200010 +#define USBD_EP5RD 0xB0200014 +#define USBD_INTEN 0xB0200018 +#define USBD_INTSTAT 0xB020001C +# define USBDEV_INT_SOF (1 << 12) +# define USBDEV_INT_HF_BIT 6 +# define USBDEV_INT_HF_MASK 0x3f << USBDEV_INT_HF_BIT) +# define USBDEV_INT_CMPLT_BIT 0 # define USBDEV_INT_CMPLT_MASK (0x3f << USBDEV_INT_CMPLT_BIT) -#define USBD_CONFIG 0xB0200020 -#define USBD_EP0CS 0xB0200024 -#define USBD_EP2CS 0xB0200028 -#define USBD_EP3CS 0xB020002C -#define USBD_EP4CS 0xB0200030 -#define USBD_EP5CS 0xB0200034 -# define USBDEV_CS_SU (1<<14) -# define USBDEV_CS_NAK (1<<13) -# define USBDEV_CS_ACK (1<<12) -# define USBDEV_CS_BUSY (1<<11) -# define USBDEV_CS_TSIZE_BIT 1 -# define USBDEV_CS_TSIZE_MASK (0x3ff << USBDEV_CS_TSIZE_BIT) -# define USBDEV_CS_STALL (1<<0) -#define USBD_EP0RDSTAT 0xB0200040 -#define USBD_EP0WRSTAT 0xB0200044 -#define USBD_EP2WRSTAT 0xB0200048 -#define USBD_EP3WRSTAT 0xB020004C -#define USBD_EP4RDSTAT 0xB0200050 -#define USBD_EP5RDSTAT 0xB0200054 -# define USBDEV_FSTAT_FLUSH (1<<6) -# define USBDEV_FSTAT_UF (1<<5) -# define USBDEV_FSTAT_OF (1<<4) -# define USBDEV_FSTAT_FCNT_BIT 0 +#define USBD_CONFIG 0xB0200020 +#define USBD_EP0CS 0xB0200024 +#define USBD_EP2CS 0xB0200028 +#define USBD_EP3CS 0xB020002C +#define USBD_EP4CS 0xB0200030 +#define USBD_EP5CS 0xB0200034 +# define USBDEV_CS_SU (1 << 14) +# define USBDEV_CS_NAK (1 << 13) +# define USBDEV_CS_ACK (1 << 12) +# define USBDEV_CS_BUSY (1 << 11) +# define USBDEV_CS_TSIZE_BIT 1 +# define USBDEV_CS_TSIZE_MASK (0x3ff << USBDEV_CS_TSIZE_BIT) +# define USBDEV_CS_STALL (1 << 0) +#define USBD_EP0RDSTAT 0xB0200040 +#define USBD_EP0WRSTAT 0xB0200044 +#define USBD_EP2WRSTAT 0xB0200048 +#define USBD_EP3WRSTAT 0xB020004C +#define USBD_EP4RDSTAT 0xB0200050 +#define USBD_EP5RDSTAT 0xB0200054 +# define USBDEV_FSTAT_FLUSH (1 << 6) +# define USBDEV_FSTAT_UF (1 << 5) +# define USBDEV_FSTAT_OF (1 << 4) +# define USBDEV_FSTAT_FCNT_BIT 0 # define USBDEV_FSTAT_FCNT_MASK (0x0f << USBDEV_FSTAT_FCNT_BIT) -#define USBD_ENABLE 0xB0200058 -# define USBDEV_ENABLE (1<<1) -# define USBDEV_CE (1<<0) +#define USBD_ENABLE 0xB0200058 +# define USBDEV_ENABLE (1 << 1) +# define USBDEV_CE (1 << 0) #endif /* !CONFIG_SOC_AU1200 */ /* Ethernet Controllers */ /* 4 byte offsets from AU1000_ETH_BASE */ -#define MAC_CONTROL 0x0 -# define MAC_RX_ENABLE (1<<2) -# define MAC_TX_ENABLE (1<<3) -# define MAC_DEF_CHECK (1<<5) -# define MAC_SET_BL(X) (((X)&0x3)<<6) -# define MAC_AUTO_PAD (1<<8) -# define MAC_DISABLE_RETRY (1<<10) -# define MAC_DISABLE_BCAST (1<<11) -# define MAC_LATE_COL (1<<12) -# define MAC_HASH_MODE (1<<13) -# define MAC_HASH_ONLY (1<<15) -# define MAC_PASS_ALL (1<<16) -# define MAC_INVERSE_FILTER (1<<17) -# define MAC_PROMISCUOUS (1<<18) -# define MAC_PASS_ALL_MULTI (1<<19) -# define MAC_FULL_DUPLEX (1<<20) -# define MAC_NORMAL_MODE 0 -# define MAC_INT_LOOPBACK (1<<21) -# define MAC_EXT_LOOPBACK (1<<22) -# define MAC_DISABLE_RX_OWN (1<<23) -# define MAC_BIG_ENDIAN (1<<30) -# define MAC_RX_ALL (1<<31) -#define MAC_ADDRESS_HIGH 0x4 -#define MAC_ADDRESS_LOW 0x8 -#define MAC_MCAST_HIGH 0xC -#define MAC_MCAST_LOW 0x10 -#define MAC_MII_CNTRL 0x14 -# define MAC_MII_BUSY (1<<0) -# define MAC_MII_READ 0 -# define MAC_MII_WRITE (1<<1) -# define MAC_SET_MII_SELECT_REG(X) (((X)&0x1f)<<6) -# define MAC_SET_MII_SELECT_PHY(X) (((X)&0x1f)<<11) -#define MAC_MII_DATA 0x18 -#define MAC_FLOW_CNTRL 0x1C -# define MAC_FLOW_CNTRL_BUSY (1<<0) -# define MAC_FLOW_CNTRL_ENABLE (1<<1) -# define MAC_PASS_CONTROL (1<<2) -# define MAC_SET_PAUSE(X) (((X)&0xffff)<<16) -#define MAC_VLAN1_TAG 0x20 -#define MAC_VLAN2_TAG 0x24 +#define MAC_CONTROL 0x0 +# define MAC_RX_ENABLE (1 << 2) +# define MAC_TX_ENABLE (1 << 3) +# define MAC_DEF_CHECK (1 << 5) +# define MAC_SET_BL(X) (((X) & 0x3) << 6) +# define MAC_AUTO_PAD (1 << 8) +# define MAC_DISABLE_RETRY (1 << 10) +# define MAC_DISABLE_BCAST (1 << 11) +# define MAC_LATE_COL (1 << 12) +# define MAC_HASH_MODE (1 << 13) +# define MAC_HASH_ONLY (1 << 15) +# define MAC_PASS_ALL (1 << 16) +# define MAC_INVERSE_FILTER (1 << 17) +# define MAC_PROMISCUOUS (1 << 18) +# define MAC_PASS_ALL_MULTI (1 << 19) +# define MAC_FULL_DUPLEX (1 << 20) +# define MAC_NORMAL_MODE 0 +# define MAC_INT_LOOPBACK (1 << 21) +# define MAC_EXT_LOOPBACK (1 << 22) +# define MAC_DISABLE_RX_OWN (1 << 23) +# define MAC_BIG_ENDIAN (1 << 30) +# define MAC_RX_ALL (1 << 31) +#define MAC_ADDRESS_HIGH 0x4 +#define MAC_ADDRESS_LOW 0x8 +#define MAC_MCAST_HIGH 0xC +#define MAC_MCAST_LOW 0x10 +#define MAC_MII_CNTRL 0x14 +# define MAC_MII_BUSY (1 << 0) +# define MAC_MII_READ 0 +# define MAC_MII_WRITE (1 << 1) +# define MAC_SET_MII_SELECT_REG(X) (((X) & 0x1f) << 6) +# define MAC_SET_MII_SELECT_PHY(X) (((X) & 0x1f) << 11) +#define MAC_MII_DATA 0x18 +#define MAC_FLOW_CNTRL 0x1C +# define MAC_FLOW_CNTRL_BUSY (1 << 0) +# define MAC_FLOW_CNTRL_ENABLE (1 << 1) +# define MAC_PASS_CONTROL (1 << 2) +# define MAC_SET_PAUSE(X) (((X) & 0xffff) << 16) +#define MAC_VLAN1_TAG 0x20 +#define MAC_VLAN2_TAG 0x24 /* Ethernet Controller Enable */ -# define MAC_EN_CLOCK_ENABLE (1<<0) -# define MAC_EN_RESET0 (1<<1) -# define MAC_EN_TOSS (0<<2) -# define MAC_EN_CACHEABLE (1<<3) -# define MAC_EN_RESET1 (1<<4) -# define MAC_EN_RESET2 (1<<5) -# define MAC_DMA_RESET (1<<6) +# define MAC_EN_CLOCK_ENABLE (1 << 0) +# define MAC_EN_RESET0 (1 << 1) +# define MAC_EN_TOSS (0 << 2) +# define MAC_EN_CACHEABLE (1 << 3) +# define MAC_EN_RESET1 (1 << 4) +# define MAC_EN_RESET2 (1 << 5) +# define MAC_DMA_RESET (1 << 6) /* Ethernet Controller DMA Channels */ -#define MAC0_TX_DMA_ADDR 0xB4004000 -#define MAC1_TX_DMA_ADDR 0xB4004200 +#define MAC0_TX_DMA_ADDR 0xB4004000 +#define MAC1_TX_DMA_ADDR 0xB4004200 /* offsets from MAC_TX_RING_ADDR address */ -#define MAC_TX_BUFF0_STATUS 0x0 -# define TX_FRAME_ABORTED (1<<0) -# define TX_JAB_TIMEOUT (1<<1) -# define TX_NO_CARRIER (1<<2) -# define TX_LOSS_CARRIER (1<<3) -# define TX_EXC_DEF (1<<4) -# define TX_LATE_COLL_ABORT (1<<5) -# define TX_EXC_COLL (1<<6) -# define TX_UNDERRUN (1<<7) -# define TX_DEFERRED (1<<8) -# define TX_LATE_COLL (1<<9) -# define TX_COLL_CNT_MASK (0xF<<10) -# define TX_PKT_RETRY (1<<31) -#define MAC_TX_BUFF0_ADDR 0x4 -# define TX_DMA_ENABLE (1<<0) -# define TX_T_DONE (1<<1) -# define TX_GET_DMA_BUFFER(X) (((X)>>2)&0x3) -#define MAC_TX_BUFF0_LEN 0x8 -#define MAC_TX_BUFF1_STATUS 0x10 -#define MAC_TX_BUFF1_ADDR 0x14 -#define MAC_TX_BUFF1_LEN 0x18 -#define MAC_TX_BUFF2_STATUS 0x20 -#define MAC_TX_BUFF2_ADDR 0x24 -#define MAC_TX_BUFF2_LEN 0x28 -#define MAC_TX_BUFF3_STATUS 0x30 -#define MAC_TX_BUFF3_ADDR 0x34 -#define MAC_TX_BUFF3_LEN 0x38 - -#define MAC0_RX_DMA_ADDR 0xB4004100 -#define MAC1_RX_DMA_ADDR 0xB4004300 +#define MAC_TX_BUFF0_STATUS 0x0 +# define TX_FRAME_ABORTED (1 << 0) +# define TX_JAB_TIMEOUT (1 << 1) +# define TX_NO_CARRIER (1 << 2) +# define TX_LOSS_CARRIER (1 << 3) +# define TX_EXC_DEF (1 << 4) +# define TX_LATE_COLL_ABORT (1 << 5) +# define TX_EXC_COLL (1 << 6) +# define TX_UNDERRUN (1 << 7) +# define TX_DEFERRED (1 << 8) +# define TX_LATE_COLL (1 << 9) +# define TX_COLL_CNT_MASK (0xF << 10) +# define TX_PKT_RETRY (1 << 31) +#define MAC_TX_BUFF0_ADDR 0x4 +# define TX_DMA_ENABLE (1 << 0) +# define TX_T_DONE (1 << 1) +# define TX_GET_DMA_BUFFER(X) (((X) >> 2) & 0x3) +#define MAC_TX_BUFF0_LEN 0x8 +#define MAC_TX_BUFF1_STATUS 0x10 +#define MAC_TX_BUFF1_ADDR 0x14 +#define MAC_TX_BUFF1_LEN 0x18 +#define MAC_TX_BUFF2_STATUS 0x20 +#define MAC_TX_BUFF2_ADDR 0x24 +#define MAC_TX_BUFF2_LEN 0x28 +#define MAC_TX_BUFF3_STATUS 0x30 +#define MAC_TX_BUFF3_ADDR 0x34 +#define MAC_TX_BUFF3_LEN 0x38 + +#define MAC0_RX_DMA_ADDR 0xB4004100 +#define MAC1_RX_DMA_ADDR 0xB4004300 /* offsets from MAC_RX_RING_ADDR */ -#define MAC_RX_BUFF0_STATUS 0x0 -# define RX_FRAME_LEN_MASK 0x3fff -# define RX_WDOG_TIMER (1<<14) -# define RX_RUNT (1<<15) -# define RX_OVERLEN (1<<16) -# define RX_COLL (1<<17) -# define RX_ETHER (1<<18) -# define RX_MII_ERROR (1<<19) -# define RX_DRIBBLING (1<<20) -# define RX_CRC_ERROR (1<<21) -# define RX_VLAN1 (1<<22) -# define RX_VLAN2 (1<<23) -# define RX_LEN_ERROR (1<<24) -# define RX_CNTRL_FRAME (1<<25) -# define RX_U_CNTRL_FRAME (1<<26) -# define RX_MCAST_FRAME (1<<27) -# define RX_BCAST_FRAME (1<<28) -# define RX_FILTER_FAIL (1<<29) -# define RX_PACKET_FILTER (1<<30) -# define RX_MISSED_FRAME (1<<31) +#define MAC_RX_BUFF0_STATUS 0x0 +# define RX_FRAME_LEN_MASK 0x3fff +# define RX_WDOG_TIMER (1 << 14) +# define RX_RUNT (1 << 15) +# define RX_OVERLEN (1 << 16) +# define RX_COLL (1 << 17) +# define RX_ETHER (1 << 18) +# define RX_MII_ERROR (1 << 19) +# define RX_DRIBBLING (1 << 20) +# define RX_CRC_ERROR (1 << 21) +# define RX_VLAN1 (1 << 22) +# define RX_VLAN2 (1 << 23) +# define RX_LEN_ERROR (1 << 24) +# define RX_CNTRL_FRAME (1 << 25) +# define RX_U_CNTRL_FRAME (1 << 26) +# define RX_MCAST_FRAME (1 << 27) +# define RX_BCAST_FRAME (1 << 28) +# define RX_FILTER_FAIL (1 << 29) +# define RX_PACKET_FILTER (1 << 30) +# define RX_MISSED_FRAME (1 << 31) # define RX_ERROR (RX_WDOG_TIMER | RX_RUNT | RX_OVERLEN | \ - RX_COLL | RX_MII_ERROR | RX_CRC_ERROR | \ - RX_LEN_ERROR | RX_U_CNTRL_FRAME | RX_MISSED_FRAME) -#define MAC_RX_BUFF0_ADDR 0x4 -# define RX_DMA_ENABLE (1<<0) -# define RX_T_DONE (1<<1) -# define RX_GET_DMA_BUFFER(X) (((X)>>2)&0x3) -# define RX_SET_BUFF_ADDR(X) ((X)&0xffffffc0) -#define MAC_RX_BUFF1_STATUS 0x10 -#define MAC_RX_BUFF1_ADDR 0x14 -#define MAC_RX_BUFF2_STATUS 0x20 -#define MAC_RX_BUFF2_ADDR 0x24 -#define MAC_RX_BUFF3_STATUS 0x30 -#define MAC_RX_BUFF3_ADDR 0x34 - + RX_COLL | RX_MII_ERROR | RX_CRC_ERROR | \ + RX_LEN_ERROR | RX_U_CNTRL_FRAME | RX_MISSED_FRAME) +#define MAC_RX_BUFF0_ADDR 0x4 +# define RX_DMA_ENABLE (1 << 0) +# define RX_T_DONE (1 << 1) +# define RX_GET_DMA_BUFFER(X) (((X) >> 2) & 0x3) +# define RX_SET_BUFF_ADDR(X) ((X) & 0xffffffc0) +#define MAC_RX_BUFF1_STATUS 0x10 +#define MAC_RX_BUFF1_ADDR 0x14 +#define MAC_RX_BUFF2_STATUS 0x20 +#define MAC_RX_BUFF2_ADDR 0x24 +#define MAC_RX_BUFF3_STATUS 0x30 +#define MAC_RX_BUFF3_ADDR 0x34 /* UARTS 0-3 */ -#define UART_BASE UART0_ADDR +#define UART_BASE UART0_ADDR #ifdef CONFIG_SOC_AU1200 -#define UART_DEBUG_BASE UART1_ADDR +#define UART_DEBUG_BASE UART1_ADDR #else -#define UART_DEBUG_BASE UART3_ADDR +#define UART_DEBUG_BASE UART3_ADDR #endif #define UART_RX 0 /* Receive buffer */ @@ -1294,341 +1293,337 @@ enum soc_au1200_ints { #define UART_MSR_DCTS 0x01 /* Delta CTS */ #define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */ - - /* SSIO */ -#define SSI0_STATUS 0xB1600000 -# define SSI_STATUS_BF (1<<4) -# define SSI_STATUS_OF (1<<3) -# define SSI_STATUS_UF (1<<2) -# define SSI_STATUS_D (1<<1) -# define SSI_STATUS_B (1<<0) -#define SSI0_INT 0xB1600004 -# define SSI_INT_OI (1<<3) -# define SSI_INT_UI (1<<2) -# define SSI_INT_DI (1<<1) -#define SSI0_INT_ENABLE 0xB1600008 -# define SSI_INTE_OIE (1<<3) -# define SSI_INTE_UIE (1<<2) -# define SSI_INTE_DIE (1<<1) -#define SSI0_CONFIG 0xB1600020 -# define SSI_CONFIG_AO (1<<24) -# define SSI_CONFIG_DO (1<<23) -# define SSI_CONFIG_ALEN_BIT 20 -# define SSI_CONFIG_ALEN_MASK (0x7<<20) -# define SSI_CONFIG_DLEN_BIT 16 -# define SSI_CONFIG_DLEN_MASK (0x7<<16) -# define SSI_CONFIG_DD (1<<11) -# define SSI_CONFIG_AD (1<<10) -# define SSI_CONFIG_BM_BIT 8 -# define SSI_CONFIG_BM_MASK (0x3<<8) -# define SSI_CONFIG_CE (1<<7) -# define SSI_CONFIG_DP (1<<6) -# define SSI_CONFIG_DL (1<<5) -# define SSI_CONFIG_EP (1<<4) -#define SSI0_ADATA 0xB1600024 -# define SSI_AD_D (1<<24) -# define SSI_AD_ADDR_BIT 16 -# define SSI_AD_ADDR_MASK (0xff<<16) -# define SSI_AD_DATA_BIT 0 -# define SSI_AD_DATA_MASK (0xfff<<0) -#define SSI0_CLKDIV 0xB1600028 -#define SSI0_CONTROL 0xB1600100 -# define SSI_CONTROL_CD (1<<1) -# define SSI_CONTROL_E (1<<0) +#define SSI0_STATUS 0xB1600000 +# define SSI_STATUS_BF (1 << 4) +# define SSI_STATUS_OF (1 << 3) +# define SSI_STATUS_UF (1 << 2) +# define SSI_STATUS_D (1 << 1) +# define SSI_STATUS_B (1 << 0) +#define SSI0_INT 0xB1600004 +# define SSI_INT_OI (1 << 3) +# define SSI_INT_UI (1 << 2) +# define SSI_INT_DI (1 << 1) +#define SSI0_INT_ENABLE 0xB1600008 +# define SSI_INTE_OIE (1 << 3) +# define SSI_INTE_UIE (1 << 2) +# define SSI_INTE_DIE (1 << 1) +#define SSI0_CONFIG 0xB1600020 +# define SSI_CONFIG_AO (1 << 24) +# define SSI_CONFIG_DO (1 << 23) +# define SSI_CONFIG_ALEN_BIT 20 +# define SSI_CONFIG_ALEN_MASK (0x7 << 20) +# define SSI_CONFIG_DLEN_BIT 16 +# define SSI_CONFIG_DLEN_MASK (0x7 << 16) +# define SSI_CONFIG_DD (1 << 11) +# define SSI_CONFIG_AD (1 << 10) +# define SSI_CONFIG_BM_BIT 8 +# define SSI_CONFIG_BM_MASK (0x3 << 8) +# define SSI_CONFIG_CE (1 << 7) +# define SSI_CONFIG_DP (1 << 6) +# define SSI_CONFIG_DL (1 << 5) +# define SSI_CONFIG_EP (1 << 4) +#define SSI0_ADATA 0xB1600024 +# define SSI_AD_D (1 << 24) +# define SSI_AD_ADDR_BIT 16 +# define SSI_AD_ADDR_MASK (0xff << 16) +# define SSI_AD_DATA_BIT 0 +# define SSI_AD_DATA_MASK (0xfff << 0) +#define SSI0_CLKDIV 0xB1600028 +#define SSI0_CONTROL 0xB1600100 +# define SSI_CONTROL_CD (1 << 1) +# define SSI_CONTROL_E (1 << 0) /* SSI1 */ -#define SSI1_STATUS 0xB1680000 -#define SSI1_INT 0xB1680004 -#define SSI1_INT_ENABLE 0xB1680008 -#define SSI1_CONFIG 0xB1680020 -#define SSI1_ADATA 0xB1680024 -#define SSI1_CLKDIV 0xB1680028 -#define SSI1_ENABLE 0xB1680100 +#define SSI1_STATUS 0xB1680000 +#define SSI1_INT 0xB1680004 +#define SSI1_INT_ENABLE 0xB1680008 +#define SSI1_CONFIG 0xB1680020 +#define SSI1_ADATA 0xB1680024 +#define SSI1_CLKDIV 0xB1680028 +#define SSI1_ENABLE 0xB1680100 /* * Register content definitions */ -#define SSI_STATUS_BF (1<<4) -#define SSI_STATUS_OF (1<<3) -#define SSI_STATUS_UF (1<<2) -#define SSI_STATUS_D (1<<1) -#define SSI_STATUS_B (1<<0) +#define SSI_STATUS_BF (1 << 4) +#define SSI_STATUS_OF (1 << 3) +#define SSI_STATUS_UF (1 << 2) +#define SSI_STATUS_D (1 << 1) +#define SSI_STATUS_B (1 << 0) /* SSI_INT */ -#define SSI_INT_OI (1<<3) -#define SSI_INT_UI (1<<2) -#define SSI_INT_DI (1<<1) +#define SSI_INT_OI (1 << 3) +#define SSI_INT_UI (1 << 2) +#define SSI_INT_DI (1 << 1) /* SSI_INTEN */ -#define SSI_INTEN_OIE (1<<3) -#define SSI_INTEN_UIE (1<<2) -#define SSI_INTEN_DIE (1<<1) - -#define SSI_CONFIG_AO (1<<24) -#define SSI_CONFIG_DO (1<<23) -#define SSI_CONFIG_ALEN (7<<20) -#define SSI_CONFIG_DLEN (15<<16) -#define SSI_CONFIG_DD (1<<11) -#define SSI_CONFIG_AD (1<<10) -#define SSI_CONFIG_BM (3<<8) -#define SSI_CONFIG_CE (1<<7) -#define SSI_CONFIG_DP (1<<6) -#define SSI_CONFIG_DL (1<<5) -#define SSI_CONFIG_EP (1<<4) -#define SSI_CONFIG_ALEN_N(N) ((N-1)<<20) -#define SSI_CONFIG_DLEN_N(N) ((N-1)<<16) -#define SSI_CONFIG_BM_HI (0<<8) -#define SSI_CONFIG_BM_LO (1<<8) -#define SSI_CONFIG_BM_CY (2<<8) - -#define SSI_ADATA_D (1<<24) -#define SSI_ADATA_ADDR (0xFF<<16) -#define SSI_ADATA_DATA (0x0FFF) -#define SSI_ADATA_ADDR_N(N) (N<<16) - -#define SSI_ENABLE_CD (1<<1) -#define SSI_ENABLE_E (1<<0) - +#define SSI_INTEN_OIE (1 << 3) +#define SSI_INTEN_UIE (1 << 2) +#define SSI_INTEN_DIE (1 << 1) + +#define SSI_CONFIG_AO (1 << 24) +#define SSI_CONFIG_DO (1 << 23) +#define SSI_CONFIG_ALEN (7 << 20) +#define SSI_CONFIG_DLEN (15 << 16) +#define SSI_CONFIG_DD (1 << 11) +#define SSI_CONFIG_AD (1 << 10) +#define SSI_CONFIG_BM (3 << 8) +#define SSI_CONFIG_CE (1 << 7) +#define SSI_CONFIG_DP (1 << 6) +#define SSI_CONFIG_DL (1 << 5) +#define SSI_CONFIG_EP (1 << 4) +#define SSI_CONFIG_ALEN_N(N) ((N-1) << 20) +#define SSI_CONFIG_DLEN_N(N) ((N-1) << 16) +#define SSI_CONFIG_BM_HI (0 << 8) +#define SSI_CONFIG_BM_LO (1 << 8) +#define SSI_CONFIG_BM_CY (2 << 8) + +#define SSI_ADATA_D (1 << 24) +#define SSI_ADATA_ADDR (0xFF << 16) +#define SSI_ADATA_DATA 0x0FFF +#define SSI_ADATA_ADDR_N(N) (N << 16) + +#define SSI_ENABLE_CD (1 << 1) +#define SSI_ENABLE_E (1 << 0) /* IrDA Controller */ -#define IRDA_BASE 0xB0300000 -#define IR_RING_PTR_STATUS (IRDA_BASE+0x00) -#define IR_RING_BASE_ADDR_H (IRDA_BASE+0x04) -#define IR_RING_BASE_ADDR_L (IRDA_BASE+0x08) -#define IR_RING_SIZE (IRDA_BASE+0x0C) -#define IR_RING_PROMPT (IRDA_BASE+0x10) -#define IR_RING_ADDR_CMPR (IRDA_BASE+0x14) -#define IR_INT_CLEAR (IRDA_BASE+0x18) -#define IR_CONFIG_1 (IRDA_BASE+0x20) -# define IR_RX_INVERT_LED (1<<0) -# define IR_TX_INVERT_LED (1<<1) -# define IR_ST (1<<2) -# define IR_SF (1<<3) -# define IR_SIR (1<<4) -# define IR_MIR (1<<5) -# define IR_FIR (1<<6) -# define IR_16CRC (1<<7) -# define IR_TD (1<<8) -# define IR_RX_ALL (1<<9) -# define IR_DMA_ENABLE (1<<10) -# define IR_RX_ENABLE (1<<11) -# define IR_TX_ENABLE (1<<12) -# define IR_LOOPBACK (1<<14) -# define IR_SIR_MODE (IR_SIR | IR_DMA_ENABLE | \ - IR_RX_ALL | IR_RX_ENABLE | IR_SF | IR_16CRC) -#define IR_SIR_FLAGS (IRDA_BASE+0x24) -#define IR_ENABLE (IRDA_BASE+0x28) -# define IR_RX_STATUS (1<<9) -# define IR_TX_STATUS (1<<10) -#define IR_READ_PHY_CONFIG (IRDA_BASE+0x2C) -#define IR_WRITE_PHY_CONFIG (IRDA_BASE+0x30) -#define IR_MAX_PKT_LEN (IRDA_BASE+0x34) -#define IR_RX_BYTE_CNT (IRDA_BASE+0x38) -#define IR_CONFIG_2 (IRDA_BASE+0x3C) -# define IR_MODE_INV (1<<0) -# define IR_ONE_PIN (1<<1) -#define IR_INTERFACE_CONFIG (IRDA_BASE+0x40) +#define IRDA_BASE 0xB0300000 +#define IR_RING_PTR_STATUS (IRDA_BASE + 0x00) +#define IR_RING_BASE_ADDR_H (IRDA_BASE + 0x04) +#define IR_RING_BASE_ADDR_L (IRDA_BASE + 0x08) +#define IR_RING_SIZE (IRDA_BASE + 0x0C) +#define IR_RING_PROMPT (IRDA_BASE + 0x10) +#define IR_RING_ADDR_CMPR (IRDA_BASE + 0x14) +#define IR_INT_CLEAR (IRDA_BASE + 0x18) +#define IR_CONFIG_1 (IRDA_BASE + 0x20) +# define IR_RX_INVERT_LED (1 << 0) +# define IR_TX_INVERT_LED (1 << 1) +# define IR_ST (1 << 2) +# define IR_SF (1 << 3) +# define IR_SIR (1 << 4) +# define IR_MIR (1 << 5) +# define IR_FIR (1 << 6) +# define IR_16CRC (1 << 7) +# define IR_TD (1 << 8) +# define IR_RX_ALL (1 << 9) +# define IR_DMA_ENABLE (1 << 10) +# define IR_RX_ENABLE (1 << 11) +# define IR_TX_ENABLE (1 << 12) +# define IR_LOOPBACK (1 << 14) +# define IR_SIR_MODE (IR_SIR | IR_DMA_ENABLE | \ + IR_RX_ALL | IR_RX_ENABLE | IR_SF | IR_16CRC) +#define IR_SIR_FLAGS (IRDA_BASE + 0x24) +#define IR_ENABLE (IRDA_BASE + 0x28) +# define IR_RX_STATUS (1 << 9) +# define IR_TX_STATUS (1 << 10) +#define IR_READ_PHY_CONFIG (IRDA_BASE + 0x2C) +#define IR_WRITE_PHY_CONFIG (IRDA_BASE + 0x30) +#define IR_MAX_PKT_LEN (IRDA_BASE + 0x34) +#define IR_RX_BYTE_CNT (IRDA_BASE + 0x38) +#define IR_CONFIG_2 (IRDA_BASE + 0x3C) +# define IR_MODE_INV (1 << 0) +# define IR_ONE_PIN (1 << 1) +#define IR_INTERFACE_CONFIG (IRDA_BASE + 0x40) /* GPIO */ -#define SYS_PINFUNC 0xB190002C -# define SYS_PF_USB (1<<15) /* 2nd USB device/host */ -# define SYS_PF_U3 (1<<14) /* GPIO23/U3TXD */ -# define SYS_PF_U2 (1<<13) /* GPIO22/U2TXD */ -# define SYS_PF_U1 (1<<12) /* GPIO21/U1TXD */ -# define SYS_PF_SRC (1<<11) /* GPIO6/SROMCKE */ -# define SYS_PF_CK5 (1<<10) /* GPIO3/CLK5 */ -# define SYS_PF_CK4 (1<<9) /* GPIO2/CLK4 */ -# define SYS_PF_IRF (1<<8) /* GPIO15/IRFIRSEL */ -# define SYS_PF_UR3 (1<<7) /* GPIO[14:9]/UART3 */ -# define SYS_PF_I2D (1<<6) /* GPIO8/I2SDI */ -# define SYS_PF_I2S (1<<5) /* I2S/GPIO[29:31] */ -# define SYS_PF_NI2 (1<<4) /* NI2/GPIO[24:28] */ -# define SYS_PF_U0 (1<<3) /* U0TXD/GPIO20 */ -# define SYS_PF_RD (1<<2) /* IRTXD/GPIO19 */ -# define SYS_PF_A97 (1<<1) /* AC97/SSL1 */ -# define SYS_PF_S0 (1<<0) /* SSI_0/GPIO[16:18] */ - -/* Au1100 Only */ -# define SYS_PF_PC (1<<18) /* PCMCIA/GPIO[207:204] */ -# define SYS_PF_LCD (1<<17) /* extern lcd/GPIO[203:200] */ -# define SYS_PF_CS (1<<16) /* EXTCLK0/32khz to gpio2 */ -# define SYS_PF_EX0 (1<<9) /* gpio2/clock */ - -/* Au1550 Only. Redefines lots of pins */ -# define SYS_PF_PSC2_MASK (7 << 17) -# define SYS_PF_PSC2_AC97 (0) -# define SYS_PF_PSC2_SPI (0) -# define SYS_PF_PSC2_I2S (1 << 17) -# define SYS_PF_PSC2_SMBUS (3 << 17) -# define SYS_PF_PSC2_GPIO (7 << 17) -# define SYS_PF_PSC3_MASK (7 << 20) -# define SYS_PF_PSC3_AC97 (0) -# define SYS_PF_PSC3_SPI (0) -# define SYS_PF_PSC3_I2S (1 << 20) -# define SYS_PF_PSC3_SMBUS (3 << 20) -# define SYS_PF_PSC3_GPIO (7 << 20) -# define SYS_PF_PSC1_S1 (1 << 1) -# define SYS_PF_MUST_BE_SET ((1 << 5) | (1 << 2)) - -/* Au1200 Only */ +#define SYS_PINFUNC 0xB190002C +# define SYS_PF_USB (1 << 15) /* 2nd USB device/host */ +# define SYS_PF_U3 (1 << 14) /* GPIO23/U3TXD */ +# define SYS_PF_U2 (1 << 13) /* GPIO22/U2TXD */ +# define SYS_PF_U1 (1 << 12) /* GPIO21/U1TXD */ +# define SYS_PF_SRC (1 << 11) /* GPIO6/SROMCKE */ +# define SYS_PF_CK5 (1 << 10) /* GPIO3/CLK5 */ +# define SYS_PF_CK4 (1 << 9) /* GPIO2/CLK4 */ +# define SYS_PF_IRF (1 << 8) /* GPIO15/IRFIRSEL */ +# define SYS_PF_UR3 (1 << 7) /* GPIO[14:9]/UART3 */ +# define SYS_PF_I2D (1 << 6) /* GPIO8/I2SDI */ +# define SYS_PF_I2S (1 << 5) /* I2S/GPIO[29:31] */ +# define SYS_PF_NI2 (1 << 4) /* NI2/GPIO[24:28] */ +# define SYS_PF_U0 (1 << 3) /* U0TXD/GPIO20 */ +# define SYS_PF_RD (1 << 2) /* IRTXD/GPIO19 */ +# define SYS_PF_A97 (1 << 1) /* AC97/SSL1 */ +# define SYS_PF_S0 (1 << 0) /* SSI_0/GPIO[16:18] */ + +/* Au1100 only */ +# define SYS_PF_PC (1 << 18) /* PCMCIA/GPIO[207:204] */ +# define SYS_PF_LCD (1 << 17) /* extern lcd/GPIO[203:200] */ +# define SYS_PF_CS (1 << 16) /* EXTCLK0/32KHz to gpio2 */ +# define SYS_PF_EX0 (1 << 9) /* GPIO2/clock */ + +/* Au1550 only. Redefines lots of pins */ +# define SYS_PF_PSC2_MASK (7 << 17) +# define SYS_PF_PSC2_AC97 0 +# define SYS_PF_PSC2_SPI 0 +# define SYS_PF_PSC2_I2S (1 << 17) +# define SYS_PF_PSC2_SMBUS (3 << 17) +# define SYS_PF_PSC2_GPIO (7 << 17) +# define SYS_PF_PSC3_MASK (7 << 20) +# define SYS_PF_PSC3_AC97 0 +# define SYS_PF_PSC3_SPI 0 +# define SYS_PF_PSC3_I2S (1 << 20) +# define SYS_PF_PSC3_SMBUS (3 << 20) +# define SYS_PF_PSC3_GPIO (7 << 20) +# define SYS_PF_PSC1_S1 (1 << 1) +# define SYS_PF_MUST_BE_SET ((1 << 5) | (1 << 2)) + +/* Au1200 only */ #ifdef CONFIG_SOC_AU1200 -#define SYS_PINFUNC_DMA (1<<31) -#define SYS_PINFUNC_S0A (1<<30) -#define SYS_PINFUNC_S1A (1<<29) -#define SYS_PINFUNC_LP0 (1<<28) -#define SYS_PINFUNC_LP1 (1<<27) -#define SYS_PINFUNC_LD16 (1<<26) -#define SYS_PINFUNC_LD8 (1<<25) -#define SYS_PINFUNC_LD1 (1<<24) -#define SYS_PINFUNC_LD0 (1<<23) -#define SYS_PINFUNC_P1A (3<<21) -#define SYS_PINFUNC_P1B (1<<20) -#define SYS_PINFUNC_FS3 (1<<19) -#define SYS_PINFUNC_P0A (3<<17) -#define SYS_PINFUNC_CS (1<<16) -#define SYS_PINFUNC_CIM (1<<15) -#define SYS_PINFUNC_P1C (1<<14) -#define SYS_PINFUNC_U1T (1<<12) -#define SYS_PINFUNC_U1R (1<<11) -#define SYS_PINFUNC_EX1 (1<<10) -#define SYS_PINFUNC_EX0 (1<<9) -#define SYS_PINFUNC_U0R (1<<8) -#define SYS_PINFUNC_MC (1<<7) -#define SYS_PINFUNC_S0B (1<<6) -#define SYS_PINFUNC_S0C (1<<5) -#define SYS_PINFUNC_P0B (1<<4) -#define SYS_PINFUNC_U0T (1<<3) -#define SYS_PINFUNC_S1B (1<<2) +#define SYS_PINFUNC_DMA (1 << 31) +#define SYS_PINFUNC_S0A (1 << 30) +#define SYS_PINFUNC_S1A (1 << 29) +#define SYS_PINFUNC_LP0 (1 << 28) +#define SYS_PINFUNC_LP1 (1 << 27) +#define SYS_PINFUNC_LD16 (1 << 26) +#define SYS_PINFUNC_LD8 (1 << 25) +#define SYS_PINFUNC_LD1 (1 << 24) +#define SYS_PINFUNC_LD0 (1 << 23) +#define SYS_PINFUNC_P1A (3 << 21) +#define SYS_PINFUNC_P1B (1 << 20) +#define SYS_PINFUNC_FS3 (1 << 19) +#define SYS_PINFUNC_P0A (3 << 17) +#define SYS_PINFUNC_CS (1 << 16) +#define SYS_PINFUNC_CIM (1 << 15) +#define SYS_PINFUNC_P1C (1 << 14) +#define SYS_PINFUNC_U1T (1 << 12) +#define SYS_PINFUNC_U1R (1 << 11) +#define SYS_PINFUNC_EX1 (1 << 10) +#define SYS_PINFUNC_EX0 (1 << 9) +#define SYS_PINFUNC_U0R (1 << 8) +#define SYS_PINFUNC_MC (1 << 7) +#define SYS_PINFUNC_S0B (1 << 6) +#define SYS_PINFUNC_S0C (1 << 5) +#define SYS_PINFUNC_P0B (1 << 4) +#define SYS_PINFUNC_U0T (1 << 3) +#define SYS_PINFUNC_S1B (1 << 2) #endif -#define SYS_TRIOUTRD 0xB1900100 -#define SYS_TRIOUTCLR 0xB1900100 -#define SYS_OUTPUTRD 0xB1900108 -#define SYS_OUTPUTSET 0xB1900108 -#define SYS_OUTPUTCLR 0xB190010C -#define SYS_PINSTATERD 0xB1900110 -#define SYS_PININPUTEN 0xB1900110 +#define SYS_TRIOUTRD 0xB1900100 +#define SYS_TRIOUTCLR 0xB1900100 +#define SYS_OUTPUTRD 0xB1900108 +#define SYS_OUTPUTSET 0xB1900108 +#define SYS_OUTPUTCLR 0xB190010C +#define SYS_PINSTATERD 0xB1900110 +#define SYS_PININPUTEN 0xB1900110 /* GPIO2, Au1500, Au1550 only */ -#define GPIO2_BASE 0xB1700000 -#define GPIO2_DIR (GPIO2_BASE + 0) -#define GPIO2_OUTPUT (GPIO2_BASE + 8) -#define GPIO2_PINSTATE (GPIO2_BASE + 0xC) -#define GPIO2_INTENABLE (GPIO2_BASE + 0x10) -#define GPIO2_ENABLE (GPIO2_BASE + 0x14) +#define GPIO2_BASE 0xB1700000 +#define GPIO2_DIR (GPIO2_BASE + 0) +#define GPIO2_OUTPUT (GPIO2_BASE + 8) +#define GPIO2_PINSTATE (GPIO2_BASE + 0xC) +#define GPIO2_INTENABLE (GPIO2_BASE + 0x10) +#define GPIO2_ENABLE (GPIO2_BASE + 0x14) /* Power Management */ -#define SYS_SCRATCH0 0xB1900018 -#define SYS_SCRATCH1 0xB190001C -#define SYS_WAKEMSK 0xB1900034 -#define SYS_ENDIAN 0xB1900038 -#define SYS_POWERCTRL 0xB190003C -#define SYS_WAKESRC 0xB190005C -#define SYS_SLPPWR 0xB1900078 -#define SYS_SLEEP 0xB190007C +#define SYS_SCRATCH0 0xB1900018 +#define SYS_SCRATCH1 0xB190001C +#define SYS_WAKEMSK 0xB1900034 +#define SYS_ENDIAN 0xB1900038 +#define SYS_POWERCTRL 0xB190003C +#define SYS_WAKESRC 0xB190005C +#define SYS_SLPPWR 0xB1900078 +#define SYS_SLEEP 0xB190007C /* Clock Controller */ -#define SYS_FREQCTRL0 0xB1900020 -# define SYS_FC_FRDIV2_BIT 22 -# define SYS_FC_FRDIV2_MASK (0xff << SYS_FC_FRDIV2_BIT) -# define SYS_FC_FE2 (1<<21) -# define SYS_FC_FS2 (1<<20) -# define SYS_FC_FRDIV1_BIT 12 -# define SYS_FC_FRDIV1_MASK (0xff << SYS_FC_FRDIV1_BIT) -# define SYS_FC_FE1 (1<<11) -# define SYS_FC_FS1 (1<<10) -# define SYS_FC_FRDIV0_BIT 2 -# define SYS_FC_FRDIV0_MASK (0xff << SYS_FC_FRDIV0_BIT) -# define SYS_FC_FE0 (1<<1) -# define SYS_FC_FS0 (1<<0) -#define SYS_FREQCTRL1 0xB1900024 -# define SYS_FC_FRDIV5_BIT 22 -# define SYS_FC_FRDIV5_MASK (0xff << SYS_FC_FRDIV5_BIT) -# define SYS_FC_FE5 (1<<21) -# define SYS_FC_FS5 (1<<20) -# define SYS_FC_FRDIV4_BIT 12 -# define SYS_FC_FRDIV4_MASK (0xff << SYS_FC_FRDIV4_BIT) -# define SYS_FC_FE4 (1<<11) -# define SYS_FC_FS4 (1<<10) -# define SYS_FC_FRDIV3_BIT 2 -# define SYS_FC_FRDIV3_MASK (0xff << SYS_FC_FRDIV3_BIT) -# define SYS_FC_FE3 (1<<1) -# define SYS_FC_FS3 (1<<0) -#define SYS_CLKSRC 0xB1900028 -# define SYS_CS_ME1_BIT 27 -# define SYS_CS_ME1_MASK (0x7<<SYS_CS_ME1_BIT) -# define SYS_CS_DE1 (1<<26) -# define SYS_CS_CE1 (1<<25) -# define SYS_CS_ME0_BIT 22 -# define SYS_CS_ME0_MASK (0x7<<SYS_CS_ME0_BIT) -# define SYS_CS_DE0 (1<<21) -# define SYS_CS_CE0 (1<<20) -# define SYS_CS_MI2_BIT 17 -# define SYS_CS_MI2_MASK (0x7<<SYS_CS_MI2_BIT) -# define SYS_CS_DI2 (1<<16) -# define SYS_CS_CI2 (1<<15) +#define SYS_FREQCTRL0 0xB1900020 +# define SYS_FC_FRDIV2_BIT 22 +# define SYS_FC_FRDIV2_MASK (0xff << SYS_FC_FRDIV2_BIT) +# define SYS_FC_FE2 (1 << 21) +# define SYS_FC_FS2 (1 << 20) +# define SYS_FC_FRDIV1_BIT 12 +# define SYS_FC_FRDIV1_MASK (0xff << SYS_FC_FRDIV1_BIT) +# define SYS_FC_FE1 (1 << 11) +# define SYS_FC_FS1 (1 << 10) +# define SYS_FC_FRDIV0_BIT 2 +# define SYS_FC_FRDIV0_MASK (0xff << SYS_FC_FRDIV0_BIT) +# define SYS_FC_FE0 (1 << 1) +# define SYS_FC_FS0 (1 << 0) +#define SYS_FREQCTRL1 0xB1900024 +# define SYS_FC_FRDIV5_BIT 22 +# define SYS_FC_FRDIV5_MASK (0xff << SYS_FC_FRDIV5_BIT) +# define SYS_FC_FE5 (1 << 21) +# define SYS_FC_FS5 (1 << 20) +# define SYS_FC_FRDIV4_BIT 12 +# define SYS_FC_FRDIV4_MASK (0xff << SYS_FC_FRDIV4_BIT) +# define SYS_FC_FE4 (1 << 11) +# define SYS_FC_FS4 (1 << 10) +# define SYS_FC_FRDIV3_BIT 2 +# define SYS_FC_FRDIV3_MASK (0xff << SYS_FC_FRDIV3_BIT) +# define SYS_FC_FE3 (1 << 1) +# define SYS_FC_FS3 (1 << 0) +#define SYS_CLKSRC 0xB1900028 +# define SYS_CS_ME1_BIT 27 +# define SYS_CS_ME1_MASK (0x7 << SYS_CS_ME1_BIT) +# define SYS_CS_DE1 (1 << 26) +# define SYS_CS_CE1 (1 << 25) +# define SYS_CS_ME0_BIT 22 +# define SYS_CS_ME0_MASK (0x7 << SYS_CS_ME0_BIT) +# define SYS_CS_DE0 (1 << 21) +# define SYS_CS_CE0 (1 << 20) +# define SYS_CS_MI2_BIT 17 +# define SYS_CS_MI2_MASK (0x7 << SYS_CS_MI2_BIT) +# define SYS_CS_DI2 (1 << 16) +# define SYS_CS_CI2 (1 << 15) #ifdef CONFIG_SOC_AU1100 -# define SYS_CS_ML_BIT 7 -# define SYS_CS_ML_MASK (0x7<<SYS_CS_ML_BIT) -# define SYS_CS_DL (1<<6) -# define SYS_CS_CL (1<<5) +# define SYS_CS_ML_BIT 7 +# define SYS_CS_ML_MASK (0x7 << SYS_CS_ML_BIT) +# define SYS_CS_DL (1 << 6) +# define SYS_CS_CL (1 << 5) #else -# define SYS_CS_MUH_BIT 12 -# define SYS_CS_MUH_MASK (0x7<<SYS_CS_MUH_BIT) -# define SYS_CS_DUH (1<<11) -# define SYS_CS_CUH (1<<10) -# define SYS_CS_MUD_BIT 7 -# define SYS_CS_MUD_MASK (0x7<<SYS_CS_MUD_BIT) -# define SYS_CS_DUD (1<<6) -# define SYS_CS_CUD (1<<5) +# define SYS_CS_MUH_BIT 12 +# define SYS_CS_MUH_MASK (0x7 << SYS_CS_MUH_BIT) +# define SYS_CS_DUH (1 << 11) +# define SYS_CS_CUH (1 << 10) +# define SYS_CS_MUD_BIT 7 +# define SYS_CS_MUD_MASK (0x7 << SYS_CS_MUD_BIT) +# define SYS_CS_DUD (1 << 6) +# define SYS_CS_CUD (1 << 5) #endif -# define SYS_CS_MIR_BIT 2 -# define SYS_CS_MIR_MASK (0x7<<SYS_CS_MIR_BIT) -# define SYS_CS_DIR (1<<1) -# define SYS_CS_CIR (1<<0) - -# define SYS_CS_MUX_AUX 0x1 -# define SYS_CS_MUX_FQ0 0x2 -# define SYS_CS_MUX_FQ1 0x3 -# define SYS_CS_MUX_FQ2 0x4 -# define SYS_CS_MUX_FQ3 0x5 -# define SYS_CS_MUX_FQ4 0x6 -# define SYS_CS_MUX_FQ5 0x7 -#define SYS_CPUPLL 0xB1900060 -#define SYS_AUXPLL 0xB1900064 +# define SYS_CS_MIR_BIT 2 +# define SYS_CS_MIR_MASK (0x7 << SYS_CS_MIR_BIT) +# define SYS_CS_DIR (1 << 1) +# define SYS_CS_CIR (1 << 0) + +# define SYS_CS_MUX_AUX 0x1 +# define SYS_CS_MUX_FQ0 0x2 +# define SYS_CS_MUX_FQ1 0x3 +# define SYS_CS_MUX_FQ2 0x4 +# define SYS_CS_MUX_FQ3 0x5 +# define SYS_CS_MUX_FQ4 0x6 +# define SYS_CS_MUX_FQ5 0x7 +#define SYS_CPUPLL 0xB1900060 +#define SYS_AUXPLL 0xB1900064 /* AC97 Controller */ -#define AC97C_CONFIG 0xB0000000 -# define AC97C_RECV_SLOTS_BIT 13 +#define AC97C_CONFIG 0xB0000000 +# define AC97C_RECV_SLOTS_BIT 13 # define AC97C_RECV_SLOTS_MASK (0x3ff << AC97C_RECV_SLOTS_BIT) -# define AC97C_XMIT_SLOTS_BIT 3 +# define AC97C_XMIT_SLOTS_BIT 3 # define AC97C_XMIT_SLOTS_MASK (0x3ff << AC97C_XMIT_SLOTS_BIT) -# define AC97C_SG (1<<2) -# define AC97C_SYNC (1<<1) -# define AC97C_RESET (1<<0) -#define AC97C_STATUS 0xB0000004 -# define AC97C_XU (1<<11) -# define AC97C_XO (1<<10) -# define AC97C_RU (1<<9) -# define AC97C_RO (1<<8) -# define AC97C_READY (1<<7) -# define AC97C_CP (1<<6) -# define AC97C_TR (1<<5) -# define AC97C_TE (1<<4) -# define AC97C_TF (1<<3) -# define AC97C_RR (1<<2) -# define AC97C_RE (1<<1) -# define AC97C_RF (1<<0) -#define AC97C_DATA 0xB0000008 -#define AC97C_CMD 0xB000000C -# define AC97C_WD_BIT 16 -# define AC97C_READ (1<<7) -# define AC97C_INDEX_MASK 0x7f -#define AC97C_CNTRL 0xB0000010 -# define AC97C_RS (1<<1) -# define AC97C_CE (1<<0) - +# define AC97C_SG (1 << 2) +# define AC97C_SYNC (1 << 1) +# define AC97C_RESET (1 << 0) +#define AC97C_STATUS 0xB0000004 +# define AC97C_XU (1 << 11) +# define AC97C_XO (1 << 10) +# define AC97C_RU (1 << 9) +# define AC97C_RO (1 << 8) +# define AC97C_READY (1 << 7) +# define AC97C_CP (1 << 6) +# define AC97C_TR (1 << 5) +# define AC97C_TE (1 << 4) +# define AC97C_TF (1 << 3) +# define AC97C_RR (1 << 2) +# define AC97C_RE (1 << 1) +# define AC97C_RF (1 << 0) +#define AC97C_DATA 0xB0000008 +#define AC97C_CMD 0xB000000C +# define AC97C_WD_BIT 16 +# define AC97C_READ (1 << 7) +# define AC97C_INDEX_MASK 0x7f +#define AC97C_CNTRL 0xB0000010 +# define AC97C_RS (1 << 1) +# define AC97C_CE (1 << 0) /* Secure Digital (SD) Controller */ #define SD0_XMIT_FIFO 0xB0600000 @@ -1638,73 +1633,74 @@ enum soc_au1200_ints { #if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550) /* Au1500 PCI Controller */ -#define Au1500_CFG_BASE 0xB4005000 // virtual, kseg0 addr -#define Au1500_PCI_CMEM (Au1500_CFG_BASE + 0) -#define Au1500_PCI_CFG (Au1500_CFG_BASE + 4) -# define PCI_ERROR ((1<<22) | (1<<23) | (1<<24) | (1<<25) | (1<<26) | (1<<27)) -#define Au1500_PCI_B2BMASK_CCH (Au1500_CFG_BASE + 8) -#define Au1500_PCI_B2B0_VID (Au1500_CFG_BASE + 0xC) -#define Au1500_PCI_B2B1_ID (Au1500_CFG_BASE + 0x10) -#define Au1500_PCI_MWMASK_DEV (Au1500_CFG_BASE + 0x14) +#define Au1500_CFG_BASE 0xB4005000 /* virtual, KSEG1 addr */ +#define Au1500_PCI_CMEM (Au1500_CFG_BASE + 0) +#define Au1500_PCI_CFG (Au1500_CFG_BASE + 4) +# define PCI_ERROR ((1 << 22) | (1 << 23) | (1 << 24) | \ + (1 << 25) | (1 << 26) | (1 << 27)) +#define Au1500_PCI_B2BMASK_CCH (Au1500_CFG_BASE + 8) +#define Au1500_PCI_B2B0_VID (Au1500_CFG_BASE + 0xC) +#define Au1500_PCI_B2B1_ID (Au1500_CFG_BASE + 0x10) +#define Au1500_PCI_MWMASK_DEV (Au1500_CFG_BASE + 0x14) #define Au1500_PCI_MWBASE_REV_CCL (Au1500_CFG_BASE + 0x18) -#define Au1500_PCI_ERR_ADDR (Au1500_CFG_BASE + 0x1C) -#define Au1500_PCI_SPEC_INTACK (Au1500_CFG_BASE + 0x20) -#define Au1500_PCI_ID (Au1500_CFG_BASE + 0x100) -#define Au1500_PCI_STATCMD (Au1500_CFG_BASE + 0x104) -#define Au1500_PCI_CLASSREV (Au1500_CFG_BASE + 0x108) -#define Au1500_PCI_HDRTYPE (Au1500_CFG_BASE + 0x10C) -#define Au1500_PCI_MBAR (Au1500_CFG_BASE + 0x110) +#define Au1500_PCI_ERR_ADDR (Au1500_CFG_BASE + 0x1C) +#define Au1500_PCI_SPEC_INTACK (Au1500_CFG_BASE + 0x20) +#define Au1500_PCI_ID (Au1500_CFG_BASE + 0x100) +#define Au1500_PCI_STATCMD (Au1500_CFG_BASE + 0x104) +#define Au1500_PCI_CLASSREV (Au1500_CFG_BASE + 0x108) +#define Au1500_PCI_HDRTYPE (Au1500_CFG_BASE + 0x10C) +#define Au1500_PCI_MBAR (Au1500_CFG_BASE + 0x110) -#define Au1500_PCI_HDR 0xB4005100 // virtual, kseg0 addr +#define Au1500_PCI_HDR 0xB4005100 /* virtual, KSEG1 addr */ -/* All of our structures, like pci resource, have 32 bit members. +/* + * All of our structures, like PCI resource, have 32-bit members. * Drivers are expected to do an ioremap on the PCI MEM resource, but it's - * hard to store 0x4 0000 0000 in a 32 bit type. We require a small patch + * hard to store 0x4 0000 0000 in a 32-bit type. We require a small patch * to __ioremap to check for addresses between (u32)Au1500_PCI_MEM_START and - * (u32)Au1500_PCI_MEM_END and change those to the full 36 bit PCI MEM - * addresses. For PCI IO, it's simpler because we get to do the ioremap + * (u32)Au1500_PCI_MEM_END and change those to the full 36-bit PCI MEM + * addresses. For PCI I/O, it's simpler because we get to do the ioremap * ourselves and then adjust the device's resources. */ -#define Au1500_EXT_CFG 0x600000000ULL -#define Au1500_EXT_CFG_TYPE1 0x680000000ULL -#define Au1500_PCI_IO_START 0x500000000ULL -#define Au1500_PCI_IO_END 0x5000FFFFFULL -#define Au1500_PCI_MEM_START 0x440000000ULL -#define Au1500_PCI_MEM_END 0x44FFFFFFFULL +#define Au1500_EXT_CFG 0x600000000ULL +#define Au1500_EXT_CFG_TYPE1 0x680000000ULL +#define Au1500_PCI_IO_START 0x500000000ULL +#define Au1500_PCI_IO_END 0x5000FFFFFULL +#define Au1500_PCI_MEM_START 0x440000000ULL +#define Au1500_PCI_MEM_END 0x44FFFFFFFULL #define PCI_IO_START 0x00001000 #define PCI_IO_END 0x000FFFFF #define PCI_MEM_START 0x40000000 #define PCI_MEM_END 0x4FFFFFFF -#define PCI_FIRST_DEVFN (0<<3) -#define PCI_LAST_DEVFN (19<<3) +#define PCI_FIRST_DEVFN (0 << 3) +#define PCI_LAST_DEVFN (19 << 3) -#define IOPORT_RESOURCE_START 0x00001000 /* skip legacy probing */ -#define IOPORT_RESOURCE_END 0xffffffff -#define IOMEM_RESOURCE_START 0x10000000 -#define IOMEM_RESOURCE_END 0xffffffff +#define IOPORT_RESOURCE_START 0x00001000 /* skip legacy probing */ +#define IOPORT_RESOURCE_END 0xffffffff +#define IOMEM_RESOURCE_START 0x10000000 +#define IOMEM_RESOURCE_END 0xffffffff #else /* Au1000 and Au1100 and Au1200 */ -/* don't allow any legacy ports probing */ -#define IOPORT_RESOURCE_START 0x10000000 -#define IOPORT_RESOURCE_END 0xffffffff -#define IOMEM_RESOURCE_START 0x10000000 -#define IOMEM_RESOURCE_END 0xffffffff +/* Don't allow any legacy ports probing */ +#define IOPORT_RESOURCE_START 0x10000000 +#define IOPORT_RESOURCE_END 0xffffffff +#define IOMEM_RESOURCE_START 0x10000000 +#define IOMEM_RESOURCE_END 0xffffffff -#define PCI_IO_START 0 -#define PCI_IO_END 0 -#define PCI_MEM_START 0 -#define PCI_MEM_END 0 +#define PCI_IO_START 0 +#define PCI_IO_END 0 +#define PCI_MEM_START 0 +#define PCI_MEM_END 0 #define PCI_FIRST_DEVFN 0 -#define PCI_LAST_DEVFN 0 +#define PCI_LAST_DEVFN 0 #endif #ifndef _LANGUAGE_ASSEMBLY -typedef volatile struct -{ +typedef volatile struct { /* 0x0000 */ u32 toytrim; /* 0x0004 */ u32 toywrite; /* 0x0008 */ u32 toymatch0; @@ -1746,13 +1742,14 @@ typedef volatile struct /* 0x010C */ u32 outputclr; /* 0x0110 */ u32 pinstaterd; #define pininputen pinstaterd - } AU1X00_SYS; -static AU1X00_SYS* const sys = (AU1X00_SYS *)SYS_BASE; +static AU1X00_SYS * const sys = (AU1X00_SYS *)SYS_BASE; #endif -/* Processor information base on prid. + +/* + * Processor information based on PRID. * Copied from PowerPC. */ #ifndef _LANGUAGE_ASSEMBLY @@ -1767,9 +1764,8 @@ struct cpu_spec { unsigned char cpu_pll_wo; /* sys_cpupll reg. write-only */ }; -extern struct cpu_spec cpu_specs[]; -extern struct cpu_spec *cur_cpu_spec[]; +extern struct cpu_spec cpu_specs[]; +extern struct cpu_spec *cur_cpu_spec[]; #endif #endif - diff --git a/include/asm-mips/mach-au1x00/au1000_dma.h b/include/asm-mips/mach-au1x00/au1000_dma.h index 9f29520e8fb0..c333b4e1cd44 100644 --- a/include/asm-mips/mach-au1x00/au1000_dma.h +++ b/include/asm-mips/mach-au1x00/au1000_dma.h @@ -1,11 +1,10 @@ /* * BRIEF MODULE DESCRIPTION - * Defines for using and allocating dma channels on the Alchemy - * Au1000 mips processor. + * Defines for using and allocating DMA channels on the Alchemy + * Au1x00 MIPS processors. * - * Copyright 2000 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * stevel@mvista.com or source@mvista.com + * Copyright 2000, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -31,7 +30,7 @@ #ifndef __ASM_AU1000_DMA_H #define __ASM_AU1000_DMA_H -#include <asm/io.h> /* need byte IO */ +#include <linux/io.h> /* need byte IO */ #include <linux/spinlock.h> /* And spinlocks */ #include <linux/delay.h> #include <asm/system.h> @@ -50,36 +49,36 @@ #define DMA_DAH_MASK (0x0f << 20) #define DMA_DID_BIT 16 #define DMA_DID_MASK (0x0f << DMA_DID_BIT) -#define DMA_DS (1<<15) -#define DMA_BE (1<<13) -#define DMA_DR (1<<12) -#define DMA_TS8 (1<<11) +#define DMA_DS (1 << 15) +#define DMA_BE (1 << 13) +#define DMA_DR (1 << 12) +#define DMA_TS8 (1 << 11) #define DMA_DW_BIT 9 #define DMA_DW_MASK (0x03 << DMA_DW_BIT) #define DMA_DW8 (0 << DMA_DW_BIT) #define DMA_DW16 (1 << DMA_DW_BIT) #define DMA_DW32 (2 << DMA_DW_BIT) -#define DMA_NC (1<<8) -#define DMA_IE (1<<7) -#define DMA_HALT (1<<6) -#define DMA_GO (1<<5) -#define DMA_AB (1<<4) -#define DMA_D1 (1<<3) -#define DMA_BE1 (1<<2) -#define DMA_D0 (1<<1) -#define DMA_BE0 (1<<0) - -#define DMA_PERIPHERAL_ADDR 0x00000008 -#define DMA_BUFFER0_START 0x0000000C -#define DMA_BUFFER1_START 0x00000014 -#define DMA_BUFFER0_COUNT 0x00000010 -#define DMA_BUFFER1_COUNT 0x00000018 -#define DMA_BAH_BIT 16 -#define DMA_BAH_MASK (0x0f << DMA_BAH_BIT) -#define DMA_COUNT_BIT 0 -#define DMA_COUNT_MASK (0xffff << DMA_COUNT_BIT) - -/* DMA Device ID's follow */ +#define DMA_NC (1 << 8) +#define DMA_IE (1 << 7) +#define DMA_HALT (1 << 6) +#define DMA_GO (1 << 5) +#define DMA_AB (1 << 4) +#define DMA_D1 (1 << 3) +#define DMA_BE1 (1 << 2) +#define DMA_D0 (1 << 1) +#define DMA_BE0 (1 << 0) + +#define DMA_PERIPHERAL_ADDR 0x00000008 +#define DMA_BUFFER0_START 0x0000000C +#define DMA_BUFFER1_START 0x00000014 +#define DMA_BUFFER0_COUNT 0x00000010 +#define DMA_BUFFER1_COUNT 0x00000018 +#define DMA_BAH_BIT 16 +#define DMA_BAH_MASK (0x0f << DMA_BAH_BIT) +#define DMA_COUNT_BIT 0 +#define DMA_COUNT_MASK (0xffff << DMA_COUNT_BIT) + +/* DMA Device IDs follow */ enum { DMA_ID_UART0_TX = 0, DMA_ID_UART0_RX, @@ -110,7 +109,8 @@ enum { }; struct dma_chan { - int dev_id; // this channel is allocated if >=0, free otherwise + int dev_id; /* this channel is allocated if >= 0, */ + /* free otherwise */ unsigned int io; const char *dev_str; int irq; @@ -132,23 +132,23 @@ extern int au1000_dma_read_proc(char *buf, char **start, off_t fpos, extern void dump_au1000_dma_channel(unsigned int dmanr); extern spinlock_t au1000_dma_spin_lock; - -static __inline__ struct dma_chan *get_dma_chan(unsigned int dmanr) +static inline struct dma_chan *get_dma_chan(unsigned int dmanr) { - if (dmanr >= NUM_AU1000_DMA_CHANNELS - || au1000_dma_table[dmanr].dev_id < 0) + if (dmanr >= NUM_AU1000_DMA_CHANNELS || + au1000_dma_table[dmanr].dev_id < 0) return NULL; return &au1000_dma_table[dmanr]; } -static __inline__ unsigned long claim_dma_lock(void) +static inline unsigned long claim_dma_lock(void) { unsigned long flags; + spin_lock_irqsave(&au1000_dma_spin_lock, flags); return flags; } -static __inline__ void release_dma_lock(unsigned long flags) +static inline void release_dma_lock(unsigned long flags) { spin_unlock_irqrestore(&au1000_dma_spin_lock, flags); } @@ -156,48 +156,53 @@ static __inline__ void release_dma_lock(unsigned long flags) /* * Set the DMA buffer enable bits in the mode register. */ -static __inline__ void enable_dma_buffer0(unsigned int dmanr) +static inline void enable_dma_buffer0(unsigned int dmanr) { struct dma_chan *chan = get_dma_chan(dmanr); + if (!chan) return; au_writel(DMA_BE0, chan->io + DMA_MODE_SET); } -static __inline__ void enable_dma_buffer1(unsigned int dmanr) + +static inline void enable_dma_buffer1(unsigned int dmanr) { struct dma_chan *chan = get_dma_chan(dmanr); + if (!chan) return; au_writel(DMA_BE1, chan->io + DMA_MODE_SET); } -static __inline__ void enable_dma_buffers(unsigned int dmanr) +static inline void enable_dma_buffers(unsigned int dmanr) { struct dma_chan *chan = get_dma_chan(dmanr); + if (!chan) return; au_writel(DMA_BE0 | DMA_BE1, chan->io + DMA_MODE_SET); } -static __inline__ void start_dma(unsigned int dmanr) +static inline void start_dma(unsigned int dmanr) { struct dma_chan *chan = get_dma_chan(dmanr); + if (!chan) return; - au_writel(DMA_GO, chan->io + DMA_MODE_SET); } #define DMA_HALT_POLL 0x5000 -static __inline__ void halt_dma(unsigned int dmanr) +static inline void halt_dma(unsigned int dmanr) { struct dma_chan *chan = get_dma_chan(dmanr); int i; + if (!chan) return; - au_writel(DMA_GO, chan->io + DMA_MODE_CLEAR); - // poll the halt bit + + /* Poll the halt bit */ for (i = 0; i < DMA_HALT_POLL; i++) if (au_readl(chan->io + DMA_MODE_READ) & DMA_HALT) break; @@ -205,55 +210,57 @@ static __inline__ void halt_dma(unsigned int dmanr) printk(KERN_INFO "halt_dma: HALT poll expired!\n"); } - -static __inline__ void disable_dma(unsigned int dmanr) +static inline void disable_dma(unsigned int dmanr) { struct dma_chan *chan = get_dma_chan(dmanr); + if (!chan) return; halt_dma(dmanr); - // now we can disable the buffers + /* Now we can disable the buffers */ au_writel(~DMA_GO, chan->io + DMA_MODE_CLEAR); } -static __inline__ int dma_halted(unsigned int dmanr) +static inline int dma_halted(unsigned int dmanr) { struct dma_chan *chan = get_dma_chan(dmanr); + if (!chan) return 1; return (au_readl(chan->io + DMA_MODE_READ) & DMA_HALT) ? 1 : 0; } -/* initialize a DMA channel */ -static __inline__ void init_dma(unsigned int dmanr) +/* Initialize a DMA channel. */ +static inline void init_dma(unsigned int dmanr) { struct dma_chan *chan = get_dma_chan(dmanr); u32 mode; + if (!chan) return; disable_dma(dmanr); - // set device FIFO address - au_writel(CPHYSADDR(chan->fifo_addr), - chan->io + DMA_PERIPHERAL_ADDR); + /* Set device FIFO address */ + au_writel(CPHYSADDR(chan->fifo_addr), chan->io + DMA_PERIPHERAL_ADDR); mode = chan->mode | (chan->dev_id << DMA_DID_BIT); if (chan->irq) mode |= DMA_IE; au_writel(~mode, chan->io + DMA_MODE_CLEAR); - au_writel(mode, chan->io + DMA_MODE_SET); + au_writel(mode, chan->io + DMA_MODE_SET); } /* - * set mode for a specific DMA channel + * Set mode for a specific DMA channel */ -static __inline__ void set_dma_mode(unsigned int dmanr, unsigned int mode) +static inline void set_dma_mode(unsigned int dmanr, unsigned int mode) { struct dma_chan *chan = get_dma_chan(dmanr); + if (!chan) return; /* @@ -266,36 +273,37 @@ static __inline__ void set_dma_mode(unsigned int dmanr, unsigned int mode) chan->mode |= mode; } -static __inline__ unsigned int get_dma_mode(unsigned int dmanr) +static inline unsigned int get_dma_mode(unsigned int dmanr) { struct dma_chan *chan = get_dma_chan(dmanr); + if (!chan) return 0; return chan->mode; } -static __inline__ int get_dma_active_buffer(unsigned int dmanr) +static inline int get_dma_active_buffer(unsigned int dmanr) { struct dma_chan *chan = get_dma_chan(dmanr); + if (!chan) return -1; return (au_readl(chan->io + DMA_MODE_READ) & DMA_AB) ? 1 : 0; } - /* - * set the device FIFO address for a specific DMA channel - only + * Set the device FIFO address for a specific DMA channel - only * applicable to GPO4 and GPO5. All the other devices have fixed * FIFO addresses. */ -static __inline__ void set_dma_fifo_addr(unsigned int dmanr, - unsigned int a) +static inline void set_dma_fifo_addr(unsigned int dmanr, unsigned int a) { struct dma_chan *chan = get_dma_chan(dmanr); + if (!chan) return; - if (chan->mode & DMA_DS) /* second bank of device ids */ + if (chan->mode & DMA_DS) /* second bank of device IDs */ return; if (chan->dev_id != DMA_ID_GP04 && chan->dev_id != DMA_ID_GP05) @@ -307,16 +315,19 @@ static __inline__ void set_dma_fifo_addr(unsigned int dmanr, /* * Clear the DMA buffer done bits in the mode register. */ -static __inline__ void clear_dma_done0(unsigned int dmanr) +static inline void clear_dma_done0(unsigned int dmanr) { struct dma_chan *chan = get_dma_chan(dmanr); + if (!chan) return; au_writel(DMA_D0, chan->io + DMA_MODE_CLEAR); } -static __inline__ void clear_dma_done1(unsigned int dmanr) + +static inline void clear_dma_done1(unsigned int dmanr) { struct dma_chan *chan = get_dma_chan(dmanr); + if (!chan) return; au_writel(DMA_D1, chan->io + DMA_MODE_CLEAR); @@ -325,16 +336,17 @@ static __inline__ void clear_dma_done1(unsigned int dmanr) /* * This does nothing - not applicable to Au1000 DMA. */ -static __inline__ void set_dma_page(unsigned int dmanr, char pagenr) +static inline void set_dma_page(unsigned int dmanr, char pagenr) { } /* * Set Buffer 0 transfer address for specific DMA channel. */ -static __inline__ void set_dma_addr0(unsigned int dmanr, unsigned int a) +static inline void set_dma_addr0(unsigned int dmanr, unsigned int a) { struct dma_chan *chan = get_dma_chan(dmanr); + if (!chan) return; au_writel(a, chan->io + DMA_BUFFER0_START); @@ -343,9 +355,10 @@ static __inline__ void set_dma_addr0(unsigned int dmanr, unsigned int a) /* * Set Buffer 1 transfer address for specific DMA channel. */ -static __inline__ void set_dma_addr1(unsigned int dmanr, unsigned int a) +static inline void set_dma_addr1(unsigned int dmanr, unsigned int a) { struct dma_chan *chan = get_dma_chan(dmanr); + if (!chan) return; au_writel(a, chan->io + DMA_BUFFER1_START); @@ -355,10 +368,10 @@ static __inline__ void set_dma_addr1(unsigned int dmanr, unsigned int a) /* * Set Buffer 0 transfer size (max 64k) for a specific DMA channel. */ -static __inline__ void set_dma_count0(unsigned int dmanr, - unsigned int count) +static inline void set_dma_count0(unsigned int dmanr, unsigned int count) { struct dma_chan *chan = get_dma_chan(dmanr); + if (!chan) return; count &= DMA_COUNT_MASK; @@ -368,10 +381,10 @@ static __inline__ void set_dma_count0(unsigned int dmanr, /* * Set Buffer 1 transfer size (max 64k) for a specific DMA channel. */ -static __inline__ void set_dma_count1(unsigned int dmanr, - unsigned int count) +static inline void set_dma_count1(unsigned int dmanr, unsigned int count) { struct dma_chan *chan = get_dma_chan(dmanr); + if (!chan) return; count &= DMA_COUNT_MASK; @@ -381,10 +394,10 @@ static __inline__ void set_dma_count1(unsigned int dmanr, /* * Set both buffer transfer sizes (max 64k) for a specific DMA channel. */ -static __inline__ void set_dma_count(unsigned int dmanr, - unsigned int count) +static inline void set_dma_count(unsigned int dmanr, unsigned int count) { struct dma_chan *chan = get_dma_chan(dmanr); + if (!chan) return; count &= DMA_COUNT_MASK; @@ -396,35 +409,36 @@ static __inline__ void set_dma_count(unsigned int dmanr, * Returns which buffer has its done bit set in the mode register. * Returns -1 if neither or both done bits set. */ -static __inline__ unsigned int get_dma_buffer_done(unsigned int dmanr) +static inline unsigned int get_dma_buffer_done(unsigned int dmanr) { struct dma_chan *chan = get_dma_chan(dmanr); + if (!chan) return 0; - - return au_readl(chan->io + DMA_MODE_READ) & (DMA_D0 | DMA_D1); + return au_readl(chan->io + DMA_MODE_READ) & (DMA_D0 | DMA_D1); } /* * Returns the DMA channel's Buffer Done IRQ number. */ -static __inline__ int get_dma_done_irq(unsigned int dmanr) +static inline int get_dma_done_irq(unsigned int dmanr) { struct dma_chan *chan = get_dma_chan(dmanr); + if (!chan) return -1; - return chan->irq; } /* * Get DMA residue count. Returns the number of _bytes_ left to transfer. */ -static __inline__ int get_dma_residue(unsigned int dmanr) +static inline int get_dma_residue(unsigned int dmanr) { int curBufCntReg, count; struct dma_chan *chan = get_dma_chan(dmanr); + if (!chan) return 0; @@ -442,4 +456,3 @@ static __inline__ int get_dma_residue(unsigned int dmanr) } #endif /* __ASM_AU1000_DMA_H */ - diff --git a/include/asm-mips/mach-au1x00/au1000_gpio.h b/include/asm-mips/mach-au1x00/au1000_gpio.h index 298f92012e8e..d8c96fda5549 100644 --- a/include/asm-mips/mach-au1x00/au1000_gpio.h +++ b/include/asm-mips/mach-au1x00/au1000_gpio.h @@ -2,12 +2,12 @@ * FILE NAME au1000_gpio.h * * BRIEF MODULE DESCRIPTION - * API to Alchemy Au1000 GPIO device. + * API to Alchemy Au1xx0 GPIO device. * * Author: MontaVista Software, Inc. <source@mvista.com> - * Steve Longerbeam <stevel@mvista.com> + * Steve Longerbeam * - * Copyright 2001 MontaVista Software Inc. + * Copyright 2001, 2008 MontaVista Software Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -37,12 +37,12 @@ #define AU1000GPIO_IOC_MAGIC 'A' -#define AU1000GPIO_IN _IOR (AU1000GPIO_IOC_MAGIC, 0, int) -#define AU1000GPIO_SET _IOW (AU1000GPIO_IOC_MAGIC, 1, int) -#define AU1000GPIO_CLEAR _IOW (AU1000GPIO_IOC_MAGIC, 2, int) -#define AU1000GPIO_OUT _IOW (AU1000GPIO_IOC_MAGIC, 3, int) -#define AU1000GPIO_TRISTATE _IOW (AU1000GPIO_IOC_MAGIC, 4, int) -#define AU1000GPIO_AVAIL_MASK _IOR (AU1000GPIO_IOC_MAGIC, 5, int) +#define AU1000GPIO_IN _IOR(AU1000GPIO_IOC_MAGIC, 0, int) +#define AU1000GPIO_SET _IOW(AU1000GPIO_IOC_MAGIC, 1, int) +#define AU1000GPIO_CLEAR _IOW(AU1000GPIO_IOC_MAGIC, 2, int) +#define AU1000GPIO_OUT _IOW(AU1000GPIO_IOC_MAGIC, 3, int) +#define AU1000GPIO_TRISTATE _IOW(AU1000GPIO_IOC_MAGIC, 4, int) +#define AU1000GPIO_AVAIL_MASK _IOR(AU1000GPIO_IOC_MAGIC, 5, int) #ifdef __KERNEL__ extern u32 get_au1000_avail_gpio_mask(void); diff --git a/include/asm-mips/mach-au1x00/au1550_spi.h b/include/asm-mips/mach-au1x00/au1550_spi.h index c2f0466523ec..40e6c489833a 100644 --- a/include/asm-mips/mach-au1x00/au1550_spi.h +++ b/include/asm-mips/mach-au1x00/au1550_spi.h @@ -1,5 +1,5 @@ /* - * au1550_spi.h - au1550 psc spi controller driver - platform data struct + * au1550_spi.h - Au1550 PSC SPI controller driver - platform data structure */ #ifndef _AU1550_SPI_H_ diff --git a/include/asm-mips/mach-au1x00/au1xxx.h b/include/asm-mips/mach-au1x00/au1xxx.h index 947135941033..1b3655090ed3 100644 --- a/include/asm-mips/mach-au1x00/au1xxx.h +++ b/include/asm-mips/mach-au1x00/au1xxx.h @@ -23,10 +23,10 @@ #ifndef _AU1XXX_H_ #define _AU1XXX_H_ - #include <asm/mach-au1x00/au1000.h> -#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550) +#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || \ + defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550) #include <asm/mach-db1x00/db1x00.h> #elif defined(CONFIG_MIPS_PB1550) diff --git a/include/asm-mips/mach-au1x00/au1xxx_dbdma.h b/include/asm-mips/mach-au1x00/au1xxx_dbdma.h index 93d507cea518..ad17d7ce516a 100644 --- a/include/asm-mips/mach-au1x00/au1xxx_dbdma.h +++ b/include/asm-mips/mach-au1x00/au1xxx_dbdma.h @@ -28,17 +28,18 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ -/* Specifics for the Au1xxx Descriptor-Based DMA Controllers, first - * seen in the AU1550 part. +/* + * Specifics for the Au1xxx Descriptor-Based DMA Controller, + * first seen in the AU1550 part. */ #ifndef _AU1000_DBDMA_H_ #define _AU1000_DBDMA_H_ - #ifndef _LANGUAGE_ASSEMBLY -/* The DMA base addresses. - * The Channels are every 256 bytes (0x0100) from the channel 0 base. +/* + * The DMA base addresses. + * The channels are every 256 bytes (0x0100) from the channel 0 base. * Interrupt status/enable is bits 15:0 for channels 15 to zero. */ #define DDMA_GLOBAL_BASE 0xb4003000 @@ -51,16 +52,14 @@ typedef volatile struct dbdma_global { u32 ddma_inten; } dbdma_global_t; -/* General Configuration. -*/ +/* General Configuration. */ #define DDMA_CONFIG_AF (1 << 2) #define DDMA_CONFIG_AH (1 << 1) #define DDMA_CONFIG_AL (1 << 0) #define DDMA_THROTTLE_EN (1 << 31) -/* The structure of a DMA Channel. -*/ +/* The structure of a DMA Channel. */ typedef volatile struct au1xxx_dma_channel { u32 ddma_cfg; /* See below */ u32 ddma_desptr; /* 32-byte aligned pointer to descriptor */ @@ -69,8 +68,7 @@ typedef volatile struct au1xxx_dma_channel { u32 ddma_irq; /* If bit 0 set, interrupt pending */ u32 ddma_stat; /* See below */ u32 ddma_bytecnt; /* Byte count, valid only when chan idle */ - /* Remainder, up to the 256 byte boundary, is reserved. - */ + /* Remainder, up to the 256 byte boundary, is reserved. */ } au1x_dma_chan_t; #define DDMA_CFG_SED (1 << 9) /* source DMA level/edge detect */ @@ -84,7 +82,8 @@ typedef volatile struct au1xxx_dma_channel { #define DDMA_CFG_DBE (1 << 1) /* Destination big endian */ #define DDMA_CFG_EN (1 << 0) /* Channel enable */ -/* Always set when descriptor processing done, regardless of +/* + * Always set when descriptor processing done, regardless of * interrupt enable state. Reflected in global intstat, don't * clear this until global intstat is read/used. */ @@ -94,7 +93,8 @@ typedef volatile struct au1xxx_dma_channel { #define DDMA_STAT_V (1 << 1) /* Descriptor valid */ #define DDMA_STAT_H (1 << 0) /* Channel Halted */ -/* "Standard" DDMA Descriptor. +/* + * "Standard" DDMA Descriptor. * Must be 32-byte aligned. */ typedef volatile struct au1xxx_ddma_desc { @@ -106,8 +106,9 @@ typedef volatile struct au1xxx_ddma_desc { u32 dscr_dest1; /* See below */ u32 dscr_stat; /* completion status */ u32 dscr_nxtptr; /* Next descriptor pointer (mostly) */ - /* First 32bytes are HW specific!!! - Lets have some SW data following.. make sure its 32bytes + /* + * First 32 bytes are HW specific!!! + * Lets have some SW data following -- make sure it's 32 bytes. */ u32 sw_status; u32 sw_context; @@ -130,10 +131,9 @@ typedef volatile struct au1xxx_ddma_desc { #define DSCR_CMD0_CV (0x1 << 2) /* Clear Valid when done */ #define DSCR_CMD0_ST_MASK (0x3 << 0) /* Status instruction */ -#define SW_STATUS_INUSE (1<<0) +#define SW_STATUS_INUSE (1 << 0) -/* Command 0 device IDs. -*/ +/* Command 0 device IDs. */ #ifdef CONFIG_SOC_AU1550 #define DSCR_CMD0_UART0_TX 0 #define DSCR_CMD0_UART0_RX 1 @@ -198,16 +198,15 @@ typedef volatile struct au1xxx_ddma_desc { #define DSCR_CMD0_THROTTLE 30 #define DSCR_CMD0_ALWAYS 31 #define DSCR_NDEV_IDS 32 -/* THis macro is used to find/create custom device types */ -#define DSCR_DEV2CUSTOM_ID(x, d) (((((x)&0xFFFF)<<8)|0x32000000)|((d)&0xFF)) -#define DSCR_CUSTOM2DEV_ID(x) ((x)&0xFF) - +/* This macro is used to find/create custom device types */ +#define DSCR_DEV2CUSTOM_ID(x, d) (((((x) & 0xFFFF) << 8) | 0x32000000) | \ + ((d) & 0xFF)) +#define DSCR_CUSTOM2DEV_ID(x) ((x) & 0xFF) #define DSCR_CMD0_SID(x) (((x) & 0x1f) << 25) #define DSCR_CMD0_DID(x) (((x) & 0x1f) << 20) -/* Source/Destination transfer width. -*/ +/* Source/Destination transfer width. */ #define DSCR_CMD0_BYTE 0 #define DSCR_CMD0_HALFWORD 1 #define DSCR_CMD0_WORD 2 @@ -215,16 +214,14 @@ typedef volatile struct au1xxx_ddma_desc { #define DSCR_CMD0_SW(x) (((x) & 0x3) << 18) #define DSCR_CMD0_DW(x) (((x) & 0x3) << 16) -/* DDMA Descriptor Type. -*/ +/* DDMA Descriptor Type. */ #define DSCR_CMD0_STANDARD 0 #define DSCR_CMD0_LITERAL 1 #define DSCR_CMD0_CMP_BRANCH 2 #define DSCR_CMD0_DT(x) (((x) & 0x3) << 13) -/* Status Instruction. -*/ +/* Status Instruction. */ #define DSCR_CMD0_ST_NOCHANGE 0 /* Don't change */ #define DSCR_CMD0_ST_CURRENT 1 /* Write current status */ #define DSCR_CMD0_ST_CMD0 2 /* Write cmd0 with V cleared */ @@ -232,23 +229,20 @@ typedef volatile struct au1xxx_ddma_desc { #define DSCR_CMD0_ST(x) (((x) & 0x3) << 0) -/* Descriptor Command 1 -*/ +/* Descriptor Command 1. */ #define DSCR_CMD1_SUPTR_MASK (0xf << 28) /* upper 4 bits of src addr */ #define DSCR_CMD1_DUPTR_MASK (0xf << 24) /* upper 4 bits of dest addr */ #define DSCR_CMD1_FL_MASK (0x3 << 22) /* Flag bits */ #define DSCR_CMD1_BC_MASK (0x3fffff) /* Byte count */ -/* Flag description. -*/ +/* Flag description. */ #define DSCR_CMD1_FL_MEM_STRIDE0 0 #define DSCR_CMD1_FL_MEM_STRIDE1 1 #define DSCR_CMD1_FL_MEM_STRIDE2 2 #define DSCR_CMD1_FL(x) (((x) & 0x3) << 22) -/* Source1, 1-dimensional stride. -*/ +/* Source1, 1-dimensional stride. */ #define DSCR_SRC1_STS_MASK (3 << 30) /* Src xfer size */ #define DSCR_SRC1_SAM_MASK (3 << 28) /* Src xfer movement */ #define DSCR_SRC1_SB_MASK (0x3fff << 14) /* Block size */ @@ -256,8 +250,7 @@ typedef volatile struct au1xxx_ddma_desc { #define DSCR_SRC1_SS_MASK (0x3fff << 0) /* Stride */ #define DSCR_SRC1_SS(x) (((x) & 0x3fff) << 0) -/* Dest1, 1-dimensional stride. -*/ +/* Dest1, 1-dimensional stride. */ #define DSCR_DEST1_DTS_MASK (3 << 30) /* Dest xfer size */ #define DSCR_DEST1_DAM_MASK (3 << 28) /* Dest xfer movement */ #define DSCR_DEST1_DB_MASK (0x3fff << 14) /* Block size */ @@ -279,29 +272,27 @@ typedef volatile struct au1xxx_ddma_desc { #define DSCR_SRC1_SAM(x) (((x) & 3) << 28) #define DSCR_DEST1_DAM(x) (((x) & 3) << 28) -/* The next descriptor pointer. -*/ +/* The next descriptor pointer. */ #define DSCR_NXTPTR_MASK (0x07ffffff) #define DSCR_NXTPTR(x) ((x) >> 5) #define DSCR_GET_NXTPTR(x) ((x) << 5) #define DSCR_NXTPTR_MS (1 << 27) -/* The number of DBDMA channels. -*/ +/* The number of DBDMA channels. */ #define NUM_DBDMA_CHANS 16 /* - * Ddma API definitions + * DDMA API definitions * FIXME: may not fit to this header file */ typedef struct dbdma_device_table { - u32 dev_id; - u32 dev_flags; - u32 dev_tsize; - u32 dev_devwidth; - u32 dev_physaddr; /* If FIFO */ - u32 dev_intlevel; - u32 dev_intpolarity; + u32 dev_id; + u32 dev_flags; + u32 dev_tsize; + u32 dev_devwidth; + u32 dev_physaddr; /* If FIFO */ + u32 dev_intlevel; + u32 dev_intpolarity; } dbdev_tab_t; @@ -316,44 +307,41 @@ typedef struct dbdma_chan_config { au1x_ddma_desc_t *chan_desc_base; au1x_ddma_desc_t *get_ptr, *put_ptr, *cur_ptr; void *chan_callparam; - void (*chan_callback)(int, void *); + void (*chan_callback)(int, void *); } chan_tab_t; #define DEV_FLAGS_INUSE (1 << 0) #define DEV_FLAGS_ANYUSE (1 << 1) #define DEV_FLAGS_OUT (1 << 2) #define DEV_FLAGS_IN (1 << 3) -#define DEV_FLAGS_BURSTABLE (1 << 4) +#define DEV_FLAGS_BURSTABLE (1 << 4) #define DEV_FLAGS_SYNC (1 << 5) -/* end Ddma API definitions */ +/* end DDMA API definitions */ -/* External functions for drivers to use. -*/ -/* Use this to allocate a dbdma channel. The device ids are one of the - * DSCR_CMD0 devices IDs, which is usually redefined to a more - * meaningful name. The 'callback' is called during dma completion +/* + * External functions for drivers to use. + * Use this to allocate a DBDMA channel. The device IDs are one of + * the DSCR_CMD0 devices IDs, which is usually redefined to a more + * meaningful name. The 'callback' is called during DMA completion * interrupt. */ extern u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, - void (*callback)(int, void *), void *callparam); + void (*callback)(int, void *), + void *callparam); #define DBDMA_MEM_CHAN DSCR_CMD0_ALWAYS -/* Set the device width of a in/out fifo. -*/ +/* Set the device width of an in/out FIFO. */ u32 au1xxx_dbdma_set_devwidth(u32 chanid, int bits); -/* Allocate a ring of descriptors for dbdma. -*/ +/* Allocate a ring of descriptors for DBDMA. */ u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries); -/* Put buffers on source/destination descriptors. -*/ +/* Put buffers on source/destination descriptors. */ u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags); u32 _au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags); -/* Get a buffer from the destination descriptor. -*/ +/* Get a buffer from the destination descriptor. */ u32 au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes); void au1xxx_dbdma_stop(u32 chanid); @@ -364,29 +352,34 @@ u32 au1xxx_get_dma_residue(u32 chanid); void au1xxx_dbdma_chan_free(u32 chanid); void au1xxx_dbdma_dump(u32 chanid); -u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr ); +u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr); -u32 au1xxx_ddma_add_device( dbdev_tab_t *dev ); -void * au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp); +u32 au1xxx_ddma_add_device(dbdev_tab_t *dev); +void *au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp); /* - Some compatibilty macros -- - Needed to make changes to API without breaking existing drivers -*/ -#define au1xxx_dbdma_put_source(chanid, buf, nbytes)_au1xxx_dbdma_put_source(chanid, buf, nbytes, DDMA_FLAGS_IE) -#define au1xxx_dbdma_put_source_flags(chanid, buf, nbytes, flags) _au1xxx_dbdma_put_source(chanid, buf, nbytes, flags) -#define put_source_flags(chanid, buf, nbytes, flags) au1xxx_dbdma_put_source_flags(chanid, buf, nbytes, flags) - - -#define au1xxx_dbdma_put_dest(chanid, buf, nbytes) _au1xxx_dbdma_put_dest(chanid, buf, nbytes, DDMA_FLAGS_IE) -#define au1xxx_dbdma_put_dest_flags(chanid, buf, nbytes, flags) _au1xxx_dbdma_put_dest(chanid, buf, nbytes, flags) -#define put_dest_flags(chanid, buf, nbytes, flags) au1xxx_dbdma_put_dest_flags(chanid, buf, nbytes, flags) + * Some compatibilty macros -- needed to make changes to API + * without breaking existing drivers. + */ +#define au1xxx_dbdma_put_source(chanid, buf, nbytes) \ + _au1xxx_dbdma_put_source(chanid, buf, nbytes, DDMA_FLAGS_IE) +#define au1xxx_dbdma_put_source_flags(chanid, buf, nbytes, flags) \ + _au1xxx_dbdma_put_source(chanid, buf, nbytes, flags) +#define put_source_flags(chanid, buf, nbytes, flags) \ + au1xxx_dbdma_put_source_flags(chanid, buf, nbytes, flags) + +#define au1xxx_dbdma_put_dest(chanid, buf, nbytes) \ + _au1xxx_dbdma_put_dest(chanid, buf, nbytes, DDMA_FLAGS_IE) +#define au1xxx_dbdma_put_dest_flags(chanid, buf, nbytes, flags) \ + _au1xxx_dbdma_put_dest(chanid, buf, nbytes, flags) +#define put_dest_flags(chanid, buf, nbytes, flags) \ + au1xxx_dbdma_put_dest_flags(chanid, buf, nbytes, flags) /* * Flags for the put_source/put_dest functions. */ -#define DDMA_FLAGS_IE (1<<0) -#define DDMA_FLAGS_NOIE (1<<1) +#define DDMA_FLAGS_IE (1 << 0) +#define DDMA_FLAGS_NOIE (1 << 1) #endif /* _LANGUAGE_ASSEMBLY */ #endif /* _AU1000_DBDMA_H_ */ diff --git a/include/asm-mips/mach-au1x00/au1xxx_ide.h b/include/asm-mips/mach-au1x00/au1xxx_ide.h index b493a5e46c63..60638b8969ba 100644 --- a/include/asm-mips/mach-au1x00/au1xxx_ide.h +++ b/include/asm-mips/mach-au1x00/au1xxx_ide.h @@ -31,167 +31,164 @@ */ #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA - #define DMA_WAIT_TIMEOUT 100 - #define NUM_DESCRIPTORS PRD_ENTRIES +#define DMA_WAIT_TIMEOUT 100 +#define NUM_DESCRIPTORS PRD_ENTRIES #else /* CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA */ - #define NUM_DESCRIPTORS 2 +#define NUM_DESCRIPTORS 2 #endif #ifndef AU1XXX_ATA_RQSIZE - #define AU1XXX_ATA_RQSIZE 128 +#define AU1XXX_ATA_RQSIZE 128 #endif /* Disable Burstable-Support for DBDMA */ #ifndef CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON - #define CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON 0 +#define CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON 0 #endif #ifdef CONFIG_PM /* -* This will enable the device to be powered up when write() or read() -* is called. If this is not defined, the driver will return -EBUSY. -*/ + * This will enable the device to be powered up when write() or read() + * is called. If this is not defined, the driver will return -EBUSY. + */ #define WAKE_ON_ACCESS 1 -typedef struct -{ - spinlock_t lock; /* Used to block on state transitions */ - au1xxx_power_dev_t *dev; /* Power Managers device structure */ - unsigned stopped; /* USed to signaling device is stopped */ +typedef struct { + spinlock_t lock; /* Used to block on state transitions */ + au1xxx_power_dev_t *dev; /* Power Managers device structure */ + unsigned stopped; /* Used to signal device is stopped */ } pm_state; #endif - -typedef struct -{ - u32 tx_dev_id, rx_dev_id, target_dev_id; - u32 tx_chan, rx_chan; - void *tx_desc_head, *rx_desc_head; - ide_hwif_t *hwif; +typedef struct { + u32 tx_dev_id, rx_dev_id, target_dev_id; + u32 tx_chan, rx_chan; + void *tx_desc_head, *rx_desc_head; + ide_hwif_t *hwif; #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA - ide_drive_t *drive; - struct dbdma_cmd *dma_table_cpu; - dma_addr_t dma_table_dma; + ide_drive_t *drive; + struct dbdma_cmd *dma_table_cpu; + dma_addr_t dma_table_dma; #endif int irq; u32 regbase; #ifdef CONFIG_PM - pm_state pm; + pm_state pm; #endif } _auide_hwif; -/******************************************************************************* -* PIO Mode timing calculation : * -* * -* Static Bus Spec ATA Spec * -* Tcsoe = t1 * -* Toecs = t9 * -* Twcs = t9 * -* Tcsh = t2i | t2 * -* Tcsoff = t2i | t2 * -* Twp = t2 * -* Tcsw = t1 * -* Tpm = 0 * -* Ta = t1+t2 * -*******************************************************************************/ +/******************************************************************************/ +/* PIO Mode timing calculation : */ +/* */ +/* Static Bus Spec ATA Spec */ +/* Tcsoe = t1 */ +/* Toecs = t9 */ +/* Twcs = t9 */ +/* Tcsh = t2i | t2 */ +/* Tcsoff = t2i | t2 */ +/* Twp = t2 */ +/* Tcsw = t1 */ +/* Tpm = 0 */ +/* Ta = t1+t2 */ +/******************************************************************************/ -#define TCSOE_MASK (0x07<<29) -#define TOECS_MASK (0x07<<26) -#define TWCS_MASK (0x07<<28) -#define TCSH_MASK (0x0F<<24) -#define TCSOFF_MASK (0x07<<20) -#define TWP_MASK (0x3F<<14) -#define TCSW_MASK (0x0F<<10) -#define TPM_MASK (0x0F<<6) -#define TA_MASK (0x3F<<0) -#define TS_MASK (1<<8) +#define TCSOE_MASK (0x07 << 29) +#define TOECS_MASK (0x07 << 26) +#define TWCS_MASK (0x07 << 28) +#define TCSH_MASK (0x0F << 24) +#define TCSOFF_MASK (0x07 << 20) +#define TWP_MASK (0x3F << 14) +#define TCSW_MASK (0x0F << 10) +#define TPM_MASK (0x0F << 6) +#define TA_MASK (0x3F << 0) +#define TS_MASK (1 << 8) /* Timing parameters PIO mode 0 */ -#define SBC_IDE_PIO0_TCSOE (0x04<<29) -#define SBC_IDE_PIO0_TOECS (0x01<<26) -#define SBC_IDE_PIO0_TWCS (0x02<<28) -#define SBC_IDE_PIO0_TCSH (0x08<<24) -#define SBC_IDE_PIO0_TCSOFF (0x07<<20) -#define SBC_IDE_PIO0_TWP (0x10<<14) -#define SBC_IDE_PIO0_TCSW (0x04<<10) -#define SBC_IDE_PIO0_TPM (0x0<<6) -#define SBC_IDE_PIO0_TA (0x15<<0) +#define SBC_IDE_PIO0_TCSOE (0x04 << 29) +#define SBC_IDE_PIO0_TOECS (0x01 << 26) +#define SBC_IDE_PIO0_TWCS (0x02 << 28) +#define SBC_IDE_PIO0_TCSH (0x08 << 24) +#define SBC_IDE_PIO0_TCSOFF (0x07 << 20) +#define SBC_IDE_PIO0_TWP (0x10 << 14) +#define SBC_IDE_PIO0_TCSW (0x04 << 10) +#define SBC_IDE_PIO0_TPM (0x00 << 6) +#define SBC_IDE_PIO0_TA (0x15 << 0) /* Timing parameters PIO mode 1 */ -#define SBC_IDE_PIO1_TCSOE (0x03<<29) -#define SBC_IDE_PIO1_TOECS (0x01<<26) -#define SBC_IDE_PIO1_TWCS (0x01<<28) -#define SBC_IDE_PIO1_TCSH (0x06<<24) -#define SBC_IDE_PIO1_TCSOFF (0x06<<20) -#define SBC_IDE_PIO1_TWP (0x08<<14) -#define SBC_IDE_PIO1_TCSW (0x03<<10) -#define SBC_IDE_PIO1_TPM (0x00<<6) -#define SBC_IDE_PIO1_TA (0x0B<<0) +#define SBC_IDE_PIO1_TCSOE (0x03 << 29) +#define SBC_IDE_PIO1_TOECS (0x01 << 26) +#define SBC_IDE_PIO1_TWCS (0x01 << 28) +#define SBC_IDE_PIO1_TCSH (0x06 << 24) +#define SBC_IDE_PIO1_TCSOFF (0x06 << 20) +#define SBC_IDE_PIO1_TWP (0x08 << 14) +#define SBC_IDE_PIO1_TCSW (0x03 << 10) +#define SBC_IDE_PIO1_TPM (0x00 << 6) +#define SBC_IDE_PIO1_TA (0x0B << 0) /* Timing parameters PIO mode 2 */ -#define SBC_IDE_PIO2_TCSOE (0x05<<29) -#define SBC_IDE_PIO2_TOECS (0x01<<26) -#define SBC_IDE_PIO2_TWCS (0x01<<28) -#define SBC_IDE_PIO2_TCSH (0x07<<24) -#define SBC_IDE_PIO2_TCSOFF (0x07<<20) -#define SBC_IDE_PIO2_TWP (0x1F<<14) -#define SBC_IDE_PIO2_TCSW (0x05<<10) -#define SBC_IDE_PIO2_TPM (0x00<<6) -#define SBC_IDE_PIO2_TA (0x22<<0) +#define SBC_IDE_PIO2_TCSOE (0x05 << 29) +#define SBC_IDE_PIO2_TOECS (0x01 << 26) +#define SBC_IDE_PIO2_TWCS (0x01 << 28) +#define SBC_IDE_PIO2_TCSH (0x07 << 24) +#define SBC_IDE_PIO2_TCSOFF (0x07 << 20) +#define SBC_IDE_PIO2_TWP (0x1F << 14) +#define SBC_IDE_PIO2_TCSW (0x05 << 10) +#define SBC_IDE_PIO2_TPM (0x00 << 6) +#define SBC_IDE_PIO2_TA (0x22 << 0) /* Timing parameters PIO mode 3 */ -#define SBC_IDE_PIO3_TCSOE (0x05<<29) -#define SBC_IDE_PIO3_TOECS (0x01<<26) -#define SBC_IDE_PIO3_TWCS (0x01<<28) -#define SBC_IDE_PIO3_TCSH (0x0D<<24) -#define SBC_IDE_PIO3_TCSOFF (0x0D<<20) -#define SBC_IDE_PIO3_TWP (0x15<<14) -#define SBC_IDE_PIO3_TCSW (0x05<<10) -#define SBC_IDE_PIO3_TPM (0x00<<6) -#define SBC_IDE_PIO3_TA (0x1A<<0) +#define SBC_IDE_PIO3_TCSOE (0x05 << 29) +#define SBC_IDE_PIO3_TOECS (0x01 << 26) +#define SBC_IDE_PIO3_TWCS (0x01 << 28) +#define SBC_IDE_PIO3_TCSH (0x0D << 24) +#define SBC_IDE_PIO3_TCSOFF (0x0D << 20) +#define SBC_IDE_PIO3_TWP (0x15 << 14) +#define SBC_IDE_PIO3_TCSW (0x05 << 10) +#define SBC_IDE_PIO3_TPM (0x00 << 6) +#define SBC_IDE_PIO3_TA (0x1A << 0) /* Timing parameters PIO mode 4 */ -#define SBC_IDE_PIO4_TCSOE (0x04<<29) -#define SBC_IDE_PIO4_TOECS (0x01<<26) -#define SBC_IDE_PIO4_TWCS (0x01<<28) -#define SBC_IDE_PIO4_TCSH (0x04<<24) -#define SBC_IDE_PIO4_TCSOFF (0x04<<20) -#define SBC_IDE_PIO4_TWP (0x0D<<14) -#define SBC_IDE_PIO4_TCSW (0x03<<10) -#define SBC_IDE_PIO4_TPM (0x00<<6) -#define SBC_IDE_PIO4_TA (0x12<<0) +#define SBC_IDE_PIO4_TCSOE (0x04 << 29) +#define SBC_IDE_PIO4_TOECS (0x01 << 26) +#define SBC_IDE_PIO4_TWCS (0x01 << 28) +#define SBC_IDE_PIO4_TCSH (0x04 << 24) +#define SBC_IDE_PIO4_TCSOFF (0x04 << 20) +#define SBC_IDE_PIO4_TWP (0x0D << 14) +#define SBC_IDE_PIO4_TCSW (0x03 << 10) +#define SBC_IDE_PIO4_TPM (0x00 << 6) +#define SBC_IDE_PIO4_TA (0x12 << 0) /* Timing parameters MDMA mode 0 */ -#define SBC_IDE_MDMA0_TCSOE (0x03<<29) -#define SBC_IDE_MDMA0_TOECS (0x01<<26) -#define SBC_IDE_MDMA0_TWCS (0x01<<28) -#define SBC_IDE_MDMA0_TCSH (0x07<<24) -#define SBC_IDE_MDMA0_TCSOFF (0x07<<20) -#define SBC_IDE_MDMA0_TWP (0x0C<<14) -#define SBC_IDE_MDMA0_TCSW (0x03<<10) -#define SBC_IDE_MDMA0_TPM (0x00<<6) -#define SBC_IDE_MDMA0_TA (0x0F<<0) +#define SBC_IDE_MDMA0_TCSOE (0x03 << 29) +#define SBC_IDE_MDMA0_TOECS (0x01 << 26) +#define SBC_IDE_MDMA0_TWCS (0x01 << 28) +#define SBC_IDE_MDMA0_TCSH (0x07 << 24) +#define SBC_IDE_MDMA0_TCSOFF (0x07 << 20) +#define SBC_IDE_MDMA0_TWP (0x0C << 14) +#define SBC_IDE_MDMA0_TCSW (0x03 << 10) +#define SBC_IDE_MDMA0_TPM (0x00 << 6) +#define SBC_IDE_MDMA0_TA (0x0F << 0) /* Timing parameters MDMA mode 1 */ -#define SBC_IDE_MDMA1_TCSOE (0x05<<29) -#define SBC_IDE_MDMA1_TOECS (0x01<<26) -#define SBC_IDE_MDMA1_TWCS (0x01<<28) -#define SBC_IDE_MDMA1_TCSH (0x05<<24) -#define SBC_IDE_MDMA1_TCSOFF (0x05<<20) -#define SBC_IDE_MDMA1_TWP (0x0F<<14) -#define SBC_IDE_MDMA1_TCSW (0x05<<10) -#define SBC_IDE_MDMA1_TPM (0x00<<6) -#define SBC_IDE_MDMA1_TA (0x15<<0) +#define SBC_IDE_MDMA1_TCSOE (0x05 << 29) +#define SBC_IDE_MDMA1_TOECS (0x01 << 26) +#define SBC_IDE_MDMA1_TWCS (0x01 << 28) +#define SBC_IDE_MDMA1_TCSH (0x05 << 24) +#define SBC_IDE_MDMA1_TCSOFF (0x05 << 20) +#define SBC_IDE_MDMA1_TWP (0x0F << 14) +#define SBC_IDE_MDMA1_TCSW (0x05 << 10) +#define SBC_IDE_MDMA1_TPM (0x00 << 6) +#define SBC_IDE_MDMA1_TA (0x15 << 0) /* Timing parameters MDMA mode 2 */ -#define SBC_IDE_MDMA2_TCSOE (0x04<<29) -#define SBC_IDE_MDMA2_TOECS (0x01<<26) -#define SBC_IDE_MDMA2_TWCS (0x01<<28) -#define SBC_IDE_MDMA2_TCSH (0x04<<24) -#define SBC_IDE_MDMA2_TCSOFF (0x04<<20) -#define SBC_IDE_MDMA2_TWP (0x0D<<14) -#define SBC_IDE_MDMA2_TCSW (0x04<<10) -#define SBC_IDE_MDMA2_TPM (0x00<<6) -#define SBC_IDE_MDMA2_TA (0x12<<0) +#define SBC_IDE_MDMA2_TCSOE (0x04 << 29) +#define SBC_IDE_MDMA2_TOECS (0x01 << 26) +#define SBC_IDE_MDMA2_TWCS (0x01 << 28) +#define SBC_IDE_MDMA2_TCSH (0x04 << 24) +#define SBC_IDE_MDMA2_TCSOFF (0x04 << 20) +#define SBC_IDE_MDMA2_TWP (0x0D << 14) +#define SBC_IDE_MDMA2_TCSW (0x04 << 10) +#define SBC_IDE_MDMA2_TPM (0x00 << 6) +#define SBC_IDE_MDMA2_TA (0x12 << 0) #define SBC_IDE_TIMING(mode) \ - SBC_IDE_##mode##_TWCS | \ - SBC_IDE_##mode##_TCSH | \ - SBC_IDE_##mode##_TCSOFF | \ - SBC_IDE_##mode##_TWP | \ - SBC_IDE_##mode##_TCSW | \ - SBC_IDE_##mode##_TPM | \ - SBC_IDE_##mode##_TA + (SBC_IDE_##mode##_TWCS | \ + SBC_IDE_##mode##_TCSH | \ + SBC_IDE_##mode##_TCSOFF | \ + SBC_IDE_##mode##_TWP | \ + SBC_IDE_##mode##_TCSW | \ + SBC_IDE_##mode##_TPM | \ + SBC_IDE_##mode##_TA) diff --git a/include/asm-mips/mach-au1x00/au1xxx_psc.h b/include/asm-mips/mach-au1x00/au1xxx_psc.h index 1bd4e27caf6b..dae4eca2417e 100644 --- a/include/asm-mips/mach-au1x00/au1xxx_psc.h +++ b/include/asm-mips/mach-au1x00/au1xxx_psc.h @@ -33,7 +33,6 @@ #ifndef _AU1000_PSC_H_ #define _AU1000_PSC_H_ - /* The PSC base addresses. */ #ifdef CONFIG_SOC_AU1550 #define PSC0_BASE_ADDR 0xb1a00000 @@ -47,8 +46,8 @@ #define PSC1_BASE_ADDR 0xb1b00000 #endif -/* The PSC select and control registers are common to - * all protocols. +/* + * The PSC select and control registers are common to all protocols. */ #define PSC_SEL_OFFSET 0x00000000 #define PSC_CTRL_OFFSET 0x00000004 @@ -59,18 +58,17 @@ #define PSC_SEL_CLK_SERCLK (2 << 4) #define PSC_SEL_PS_MASK 0x00000007 -#define PSC_SEL_PS_DISABLED (0) -#define PSC_SEL_PS_SPIMODE (2) -#define PSC_SEL_PS_I2SMODE (3) -#define PSC_SEL_PS_AC97MODE (4) -#define PSC_SEL_PS_SMBUSMODE (5) - -#define PSC_CTRL_DISABLE (0) -#define PSC_CTRL_SUSPEND (2) -#define PSC_CTRL_ENABLE (3) - -/* AC97 Registers. -*/ +#define PSC_SEL_PS_DISABLED 0 +#define PSC_SEL_PS_SPIMODE 2 +#define PSC_SEL_PS_I2SMODE 3 +#define PSC_SEL_PS_AC97MODE 4 +#define PSC_SEL_PS_SMBUSMODE 5 + +#define PSC_CTRL_DISABLE 0 +#define PSC_CTRL_SUSPEND 2 +#define PSC_CTRL_ENABLE 3 + +/* AC97 Registers. */ #define PSC_AC97CFG_OFFSET 0x00000008 #define PSC_AC97MSK_OFFSET 0x0000000c #define PSC_AC97PCR_OFFSET 0x00000010 @@ -95,8 +93,7 @@ #define PSC_AC97GPO (AC97_PSC_BASE + PSC_AC97GPO_OFFSET) #define PSC_AC97GPI (AC97_PSC_BASE + PSC_AC97GPI_OFFSET) -/* AC97 Config Register. -*/ +/* AC97 Config Register. */ #define PSC_AC97CFG_RT_MASK (3 << 30) #define PSC_AC97CFG_RT_FIFO1 (0 << 30) #define PSC_AC97CFG_RT_FIFO2 (1 << 30) @@ -118,20 +115,19 @@ #define PSC_AC97CFG_RXSLOT_MASK (0x3ff << 1) #define PSC_AC97CFG_GE_ENABLE (1) -/* Enable slots 3-12. -*/ +/* Enable slots 3-12. */ #define PSC_AC97CFG_TXSLOT_ENA(x) (1 << (((x) - 3) + 11)) #define PSC_AC97CFG_RXSLOT_ENA(x) (1 << (((x) - 3) + 1)) -/* The word length equation is ((x) * 2) + 2, so choose 'x' appropriately. +/* + * The word length equation is ((x) * 2) + 2, so choose 'x' appropriately. * The only sensible numbers are 7, 9, or possibly 11. Nah, just do the * arithmetic in the macro. */ -#define PSC_AC97CFG_SET_LEN(x) (((((x)-2)/2) & 0xf) << 21) +#define PSC_AC97CFG_SET_LEN(x) (((((x) - 2) / 2) & 0xf) << 21) #define PSC_AC97CFG_GET_LEN(x) (((((x) >> 21) & 0xf) * 2) + 2) -/* AC97 Mask Register. -*/ +/* AC97 Mask Register. */ #define PSC_AC97MSK_GR (1 << 25) #define PSC_AC97MSK_CD (1 << 24) #define PSC_AC97MSK_RR (1 << 13) @@ -148,8 +144,7 @@ PSC_AC97MSK_TO | PSC_AC97MSK_TU | \ PSC_AC97MSK_RD | PSC_AC97MSK_TD) -/* AC97 Protocol Control Register. -*/ +/* AC97 Protocol Control Register. */ #define PSC_AC97PCR_RC (1 << 6) #define PSC_AC97PCR_RP (1 << 5) #define PSC_AC97PCR_RS (1 << 4) @@ -157,8 +152,7 @@ #define PSC_AC97PCR_TP (1 << 1) #define PSC_AC97PCR_TS (1 << 0) -/* AC97 Status register (read only). -*/ +/* AC97 Status register (read only). */ #define PSC_AC97STAT_CB (1 << 26) #define PSC_AC97STAT_CP (1 << 25) #define PSC_AC97STAT_CR (1 << 24) @@ -174,8 +168,7 @@ #define PSC_AC97STAT_DR (1 << 1) #define PSC_AC97STAT_SR (1 << 0) -/* AC97 Event Register. -*/ +/* AC97 Event Register. */ #define PSC_AC97EVNT_GR (1 << 25) #define PSC_AC97EVNT_CD (1 << 24) #define PSC_AC97EVNT_RR (1 << 13) @@ -187,22 +180,18 @@ #define PSC_AC97EVNT_RD (1 << 5) #define PSC_AC97EVNT_TD (1 << 4) -/* CODEC Command Register. -*/ +/* CODEC Command Register. */ #define PSC_AC97CDC_RD (1 << 25) #define PSC_AC97CDC_ID_MASK (3 << 23) #define PSC_AC97CDC_INDX_MASK (0x7f << 16) -#define PSC_AC97CDC_ID(x) (((x) & 0x3) << 23) +#define PSC_AC97CDC_ID(x) (((x) & 0x03) << 23) #define PSC_AC97CDC_INDX(x) (((x) & 0x7f) << 16) -/* AC97 Reset Control Register. -*/ +/* AC97 Reset Control Register. */ #define PSC_AC97RST_RST (1 << 1) #define PSC_AC97RST_SNC (1 << 0) - -/* PSC in I2S Mode. -*/ +/* PSC in I2S Mode. */ typedef struct psc_i2s { u32 psc_sel; u32 psc_ctrl; @@ -215,8 +204,7 @@ typedef struct psc_i2s { u32 psc_i2sudf; } psc_i2s_t; -/* I2S Config Register. -*/ +/* I2S Config Register. */ #define PSC_I2SCFG_RT_MASK (3 << 30) #define PSC_I2SCFG_RT_FIFO1 (0 << 30) #define PSC_I2SCFG_RT_FIFO2 (1 << 30) @@ -247,8 +235,7 @@ typedef struct psc_i2s { #define PSC_I2SCFG_MLJ (1 << 10) #define PSC_I2SCFG_XM (1 << 9) -/* The word length equation is simply LEN+1. - */ +/* The word length equation is simply LEN+1. */ #define PSC_I2SCFG_SET_LEN(x) ((((x) - 1) & 0x1f) << 4) #define PSC_I2SCFG_GET_LEN(x) ((((x) >> 4) & 0x1f) + 1) @@ -256,8 +243,7 @@ typedef struct psc_i2s { #define PSC_I2SCFG_MLF (1 << 1) #define PSC_I2SCFG_MS (1 << 0) -/* I2S Mask Register. -*/ +/* I2S Mask Register. */ #define PSC_I2SMSK_RR (1 << 13) #define PSC_I2SMSK_RO (1 << 12) #define PSC_I2SMSK_RU (1 << 11) @@ -271,8 +257,7 @@ typedef struct psc_i2s { PSC_I2SMSK_TO | PSC_I2SMSK_TU | \ PSC_I2SMSK_RD | PSC_I2SMSK_TD) -/* I2S Protocol Control Register. -*/ +/* I2S Protocol Control Register. */ #define PSC_I2SPCR_RC (1 << 6) #define PSC_I2SPCR_RP (1 << 5) #define PSC_I2SPCR_RS (1 << 4) @@ -280,8 +265,7 @@ typedef struct psc_i2s { #define PSC_I2SPCR_TP (1 << 1) #define PSC_I2SPCR_TS (1 << 0) -/* I2S Status register (read only). -*/ +/* I2S Status register (read only). */ #define PSC_I2SSTAT_RF (1 << 13) #define PSC_I2SSTAT_RE (1 << 12) #define PSC_I2SSTAT_RR (1 << 11) @@ -294,8 +278,7 @@ typedef struct psc_i2s { #define PSC_I2SSTAT_DR (1 << 1) #define PSC_I2SSTAT_SR (1 << 0) -/* I2S Event Register. -*/ +/* I2S Event Register. */ #define PSC_I2SEVNT_RR (1 << 13) #define PSC_I2SEVNT_RO (1 << 12) #define PSC_I2SEVNT_RU (1 << 11) @@ -305,8 +288,7 @@ typedef struct psc_i2s { #define PSC_I2SEVNT_RD (1 << 5) #define PSC_I2SEVNT_TD (1 << 4) -/* PSC in SPI Mode. -*/ +/* PSC in SPI Mode. */ typedef struct psc_spi { u32 psc_sel; u32 psc_ctrl; @@ -318,8 +300,7 @@ typedef struct psc_spi { u32 psc_spitxrx; } psc_spi_t; -/* SPI Config Register. -*/ +/* SPI Config Register. */ #define PSC_SPICFG_RT_MASK (3 << 30) #define PSC_SPICFG_RT_FIFO1 (0 << 30) #define PSC_SPICFG_RT_FIFO2 (1 << 30) @@ -355,8 +336,7 @@ typedef struct psc_spi { #define PSC_SPICFG_MLF (1 << 1) #define PSC_SPICFG_MO (1 << 0) -/* SPI Mask Register. -*/ +/* SPI Mask Register. */ #define PSC_SPIMSK_MM (1 << 16) #define PSC_SPIMSK_RR (1 << 13) #define PSC_SPIMSK_RO (1 << 12) @@ -371,16 +351,14 @@ typedef struct psc_spi { PSC_SPIMSK_TU | PSC_SPIMSK_SD | \ PSC_SPIMSK_MD) -/* SPI Protocol Control Register. -*/ +/* SPI Protocol Control Register. */ #define PSC_SPIPCR_RC (1 << 6) #define PSC_SPIPCR_SP (1 << 5) #define PSC_SPIPCR_SS (1 << 4) #define PSC_SPIPCR_TC (1 << 2) #define PSC_SPIPCR_MS (1 << 0) -/* SPI Status register (read only). -*/ +/* SPI Status register (read only). */ #define PSC_SPISTAT_RF (1 << 13) #define PSC_SPISTAT_RE (1 << 12) #define PSC_SPISTAT_RR (1 << 11) @@ -393,8 +371,7 @@ typedef struct psc_spi { #define PSC_SPISTAT_DR (1 << 1) #define PSC_SPISTAT_SR (1 << 0) -/* SPI Event Register. -*/ +/* SPI Event Register. */ #define PSC_SPIEVNT_MM (1 << 16) #define PSC_SPIEVNT_RR (1 << 13) #define PSC_SPIEVNT_RO (1 << 12) @@ -405,13 +382,11 @@ typedef struct psc_spi { #define PSC_SPIEVNT_SD (1 << 5) #define PSC_SPIEVNT_MD (1 << 4) -/* Transmit register control. -*/ +/* Transmit register control. */ #define PSC_SPITXRX_LC (1 << 29) #define PSC_SPITXRX_SR (1 << 28) -/* PSC in SMBus (I2C) Mode. -*/ +/* PSC in SMBus (I2C) Mode. */ typedef struct psc_smb { u32 psc_sel; u32 psc_ctrl; @@ -424,8 +399,7 @@ typedef struct psc_smb { u32 psc_smbtmr; } psc_smb_t; -/* SMBus Config Register. -*/ +/* SMBus Config Register. */ #define PSC_SMBCFG_RT_MASK (3 << 30) #define PSC_SMBCFG_RT_FIFO1 (0 << 30) #define PSC_SMBCFG_RT_FIFO2 (1 << 30) @@ -452,8 +426,7 @@ typedef struct psc_smb { #define PSC_SMBCFG_SET_SLV(x) (((x) & 0x7f) << 1) -/* SMBus Mask Register. -*/ +/* SMBus Mask Register. */ #define PSC_SMBMSK_DN (1 << 30) #define PSC_SMBMSK_AN (1 << 29) #define PSC_SMBMSK_AL (1 << 28) @@ -471,13 +444,11 @@ typedef struct psc_smb { PSC_SMBMSK_TU | PSC_SMBMSK_SD | \ PSC_SMBMSK_MD) -/* SMBus Protocol Control Register. -*/ +/* SMBus Protocol Control Register. */ #define PSC_SMBPCR_DC (1 << 2) #define PSC_SMBPCR_MS (1 << 0) -/* SMBus Status register (read only). -*/ +/* SMBus Status register (read only). */ #define PSC_SMBSTAT_BB (1 << 28) #define PSC_SMBSTAT_RF (1 << 13) #define PSC_SMBSTAT_RE (1 << 12) @@ -491,8 +462,7 @@ typedef struct psc_smb { #define PSC_SMBSTAT_DR (1 << 1) #define PSC_SMBSTAT_SR (1 << 0) -/* SMBus Event Register. -*/ +/* SMBus Event Register. */ #define PSC_SMBEVNT_DN (1 << 30) #define PSC_SMBEVNT_AN (1 << 29) #define PSC_SMBEVNT_AL (1 << 28) @@ -510,15 +480,13 @@ typedef struct psc_smb { PSC_SMBEVNT_TU | PSC_SMBEVNT_SD | \ PSC_SMBEVNT_MD) -/* Transmit register control. -*/ +/* Transmit register control. */ #define PSC_SMBTXRX_RSR (1 << 28) #define PSC_SMBTXRX_STP (1 << 29) -#define PSC_SMBTXRX_DATAMASK (0xff) +#define PSC_SMBTXRX_DATAMASK 0xff -/* SMBus protocol timers register. -*/ -#define PSC_SMBTMR_SET_TH(x) (((x) & 0x3) << 30) +/* SMBus protocol timers register. */ +#define PSC_SMBTMR_SET_TH(x) (((x) & 0x03) << 30) #define PSC_SMBTMR_SET_PS(x) (((x) & 0x1f) << 25) #define PSC_SMBTMR_SET_PU(x) (((x) & 0x1f) << 20) #define PSC_SMBTMR_SET_SH(x) (((x) & 0x1f) << 15) @@ -526,5 +494,4 @@ typedef struct psc_smb { #define PSC_SMBTMR_SET_CL(x) (((x) & 0x1f) << 5) #define PSC_SMBTMR_SET_CH(x) (((x) & 0x1f) << 0) - #endif /* _AU1000_PSC_H_ */ diff --git a/include/asm-mips/mach-db1x00/db1200.h b/include/asm-mips/mach-db1x00/db1200.h index eedd048a7261..27f26102b1bb 100644 --- a/include/asm-mips/mach-db1x00/db1200.h +++ b/include/asm-mips/mach-db1x00/db1200.h @@ -1,6 +1,6 @@ /* - * AMD Alchemy DB1200 Referrence Board - * Board Registers defines. + * AMD Alchemy DBAu1200 Reference Board + * Board register defines. * * ######################################################################## * @@ -27,26 +27,25 @@ #include <linux/types.h> #include <asm/mach-au1x00/au1xxx_psc.h> -// This is defined in au1000.h with bogus value -#undef AU1X00_EXTERNAL_INT +#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX +#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX +#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX +#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX -#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX -#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX -#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX -#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX - -/* SPI and SMB are muxed on the Pb1200 board. - Refer to board documentation. +/* + * SPI and SMB are muxed on the DBAu1200 board. + * Refer to board documentation. */ -#define SPI_PSC_BASE PSC0_BASE_ADDR -#define SMBUS_PSC_BASE PSC0_BASE_ADDR -/* AC97 and I2S are muxed on the Pb1200 board. - Refer to board documentation. +#define SPI_PSC_BASE PSC0_BASE_ADDR +#define SMBUS_PSC_BASE PSC0_BASE_ADDR +/* + * AC'97 and I2S are muxed on the DBAu1200 board. + * Refer to board documentation. */ -#define AC97_PSC_BASE PSC1_BASE_ADDR +#define AC97_PSC_BASE PSC1_BASE_ADDR #define I2S_PSC_BASE PSC1_BASE_ADDR -#define BCSR_KSEG1_ADDR 0xB9800000 +#define BCSR_KSEG1_ADDR 0xB9800000 typedef volatile struct { @@ -102,9 +101,9 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define BCSR_STATUS_SWAPBOOT 0x0040 #define BCSR_STATUS_FLASHBUSY 0x0100 #define BCSR_STATUS_IDECBLID 0x0200 -#define BCSR_STATUS_SD0WP 0x0400 -#define BCSR_STATUS_U0RXD 0x1000 -#define BCSR_STATUS_U1RXD 0x2000 +#define BCSR_STATUS_SD0WP 0x0400 +#define BCSR_STATUS_U0RXD 0x1000 +#define BCSR_STATUS_U1RXD 0x2000 #define BCSR_SWITCHES_OCTAL 0x00FF #define BCSR_SWITCHES_DIP_1 0x0080 @@ -122,8 +121,8 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define BCSR_RESETS_DC 0x0004 #define BCSR_RESETS_IDE 0x0008 #define BCSR_RESETS_TV 0x0010 -/* not resets but in the same register */ -#define BCSR_RESETS_PWMR1mUX 0x0800 +/* Not resets but in the same register */ +#define BCSR_RESETS_PWMR1MUX 0x0800 #define BCSR_RESETS_PCS0MUX 0x1000 #define BCSR_RESETS_PCS1MUX 0x2000 #define BCSR_RESETS_SPISEL 0x4000 @@ -160,7 +159,7 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define BCSR_INT_PC0STSCHG 0x0008 #define BCSR_INT_PC1 0x0010 #define BCSR_INT_PC1STSCHG 0x0020 -#define BCSR_INT_DC 0x0040 +#define BCSR_INT_DC 0x0040 #define BCSR_INT_FLASHBUSY 0x0080 #define BCSR_INT_PC0INSERT 0x0100 #define BCSR_INT_PC0EJECT 0x0200 @@ -179,10 +178,10 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define IDE_DDMA_REQ DSCR_CMD0_DMA_REQ1 #define IDE_RQSIZE 128 -#define NAND_PHYS_ADDR 0x20000000 +#define NAND_PHYS_ADDR 0x20000000 /* - * External Interrupts for Pb1200 as of 8/6/2004. + * External Interrupts for DBAu1200 as of 8/6/2004. * Bit positions in the CPLD registers can be calculated by taking * the interrupt define and subtracting the DB1200_INT_BEGIN value. * @@ -211,23 +210,21 @@ enum external_pb1200_ints { }; -/* For drivers/pcmcia/au1000_db1x00.c */ - -/* PCMCIA Db1x00 specific defines */ - -#define PCMCIA_MAX_SOCK 1 -#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1) +/* + * DBAu1200 specific PCMCIA defines for drivers/pcmcia/au1000_db1x00.c + */ +#define PCMCIA_MAX_SOCK 1 +#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) /* VPP/VCC */ -#define SET_VCC_VPP(VCC, VPP, SLOT)\ - ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8)) +#define SET_VCC_VPP(VCC, VPP, SLOT) \ + ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8)) -#define BOARD_PC0_INT DB1200_PC0_INT -#define BOARD_PC1_INT DB1200_PC1_INT -#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1<<(8+(2*SOCKET))) +#define BOARD_PC0_INT DB1200_PC0_INT +#define BOARD_PC1_INT DB1200_PC1_INT +#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1 << (8 + (2 * SOCKET))) -/* Nand chip select */ +/* NAND chip select */ #define NAND_CS 1 #endif /* __ASM_DB1200_H */ - diff --git a/include/asm-mips/mach-db1x00/db1x00.h b/include/asm-mips/mach-db1x00/db1x00.h index e7a88ba35833..612ae90dbcb8 100644 --- a/include/asm-mips/mach-db1x00/db1x00.h +++ b/include/asm-mips/mach-db1x00/db1x00.h @@ -1,9 +1,8 @@ /* - * AMD Alchemy DB1x00 Reference Boards + * AMD Alchemy DBAu1x00 Reference Boards * - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org) * * ######################################################################## @@ -32,26 +31,26 @@ #ifdef CONFIG_MIPS_DB1550 -#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX -#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX -#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX -#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX +#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX +#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX +#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX +#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX -#define SPI_PSC_BASE PSC0_BASE_ADDR -#define AC97_PSC_BASE PSC1_BASE_ADDR -#define SMBUS_PSC_BASE PSC2_BASE_ADDR -#define I2S_PSC_BASE PSC3_BASE_ADDR +#define SPI_PSC_BASE PSC0_BASE_ADDR +#define AC97_PSC_BASE PSC1_BASE_ADDR +#define SMBUS_PSC_BASE PSC2_BASE_ADDR +#define I2S_PSC_BASE PSC3_BASE_ADDR -#define BCSR_KSEG1_ADDR 0xAF000000 -#define NAND_PHYS_ADDR 0x20000000 +#define BCSR_KSEG1_ADDR 0xAF000000 +#define NAND_PHYS_ADDR 0x20000000 #else #define BCSR_KSEG1_ADDR 0xAE000000 #endif /* - * Overlay data structure of the Db1x00 board registers. - * Registers located at physical 0E0000xx, KSEG1 0xAE0000xx + * Overlay data structure of the DBAu1x00 board registers. + * Registers are located at physical 0E0000xx, KSEG1 0xAE0000xx. */ typedef volatile struct { @@ -138,18 +137,19 @@ typedef volatile struct #define BCSR_SWRESET_RESET 0x0080 -/* PCMCIA Db1x00 specific defines */ -#define PCMCIA_MAX_SOCK 1 -#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1) +/* PCMCIA DBAu1x00 specific defines */ +#define PCMCIA_MAX_SOCK 1 +#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) /* VPP/VCC */ #define SET_VCC_VPP(VCC, VPP, SLOT)\ - ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8)) + ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8)) -/* SD controller macros */ /* - * Detect card. + * SD controller macros */ + +/* Detect card. */ #define mmc_card_inserted(_n_, _res_) \ do { \ BCSR * const bcsr = (BCSR *)0xAE000000; \ @@ -176,10 +176,10 @@ typedef volatile struct unsigned long mmc_pwr, mmc_wp, board_specific; \ if ((_n_)) { \ mmc_pwr = BCSR_BOARD_SD1_PWR; \ - mmc_wp = BCSR_BOARD_SD1_WP; \ + mmc_wp = BCSR_BOARD_SD1_WP; \ } else { \ mmc_pwr = BCSR_BOARD_SD0_PWR; \ - mmc_wp = BCSR_BOARD_SD0_WP; \ + mmc_wp = BCSR_BOARD_SD0_WP; \ } \ board_specific = au_readl((unsigned long)(&bcsr->specific)); \ if (!(board_specific & mmc_wp)) {/* low means card present */ \ @@ -190,17 +190,19 @@ typedef volatile struct } while (0) -/* NAND defines */ -/* Timing values as described in databook, * ns value stripped of +/* + * NAND defines + * + * Timing values as described in databook, * ns value stripped of the * lower 2 bits. - * These defines are here rather than an SOC1550 generic file because + * These defines are here rather than an Au1550 generic file because * the parts chosen on another board may be different and may require * different timings. */ -#define NAND_T_H (18 >> 2) -#define NAND_T_PUL (30 >> 2) -#define NAND_T_SU (30 >> 2) -#define NAND_T_WH (30 >> 2) +#define NAND_T_H (18 >> 2) +#define NAND_T_PUL (30 >> 2) +#define NAND_T_SU (30 >> 2) +#define NAND_T_WH (30 >> 2) /* Bitfield shift amounts */ #define NAND_T_H_SHIFT 0 @@ -208,16 +210,15 @@ typedef volatile struct #define NAND_T_SU_SHIFT 8 #define NAND_T_WH_SHIFT 12 -#define NAND_TIMING ((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \ - ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \ - ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \ - ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT) -#define NAND_CS 1 +#define NAND_TIMING (((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \ + ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \ + ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \ + ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)) +#define NAND_CS 1 -/* should be done by yamon */ -#define NAND_STCFG 0x00400005 /* 8-bit NAND */ -#define NAND_STTIME 0x00007774 /* valid for 396MHz SD=2 only */ -#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */ +/* Should be done by YAMON */ +#define NAND_STCFG 0x00400005 /* 8-bit NAND */ +#define NAND_STTIME 0x00007774 /* valid for 396 MHz SD=2 only */ +#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */ #endif /* __ASM_DB1X00_H */ - diff --git a/include/asm-mips/mach-pb1x00/pb1000.h b/include/asm-mips/mach-pb1x00/pb1000.h index b52e0e7ee3fb..6d1ff9060e44 100644 --- a/include/asm-mips/mach-pb1x00/pb1000.h +++ b/include/asm-mips/mach-pb1x00/pb1000.h @@ -1,9 +1,8 @@ /* - * Alchemy Semi PB1000 Referrence Board + * Alchemy Semi Pb1000 Referrence Board * - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> * * ######################################################################## * @@ -28,145 +27,61 @@ #define __ASM_PB1000_H /* PCMCIA PB1000 specific defines */ -#define PCMCIA_MAX_SOCK 1 -#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1) - -#define PB1000_PCR 0xBE000000 -# define PCR_SLOT_0_VPP0 (1<<0) -# define PCR_SLOT_0_VPP1 (1<<1) -# define PCR_SLOT_0_VCC0 (1<<2) -# define PCR_SLOT_0_VCC1 (1<<3) -# define PCR_SLOT_0_RST (1<<4) - -# define PCR_SLOT_1_VPP0 (1<<8) -# define PCR_SLOT_1_VPP1 (1<<9) -# define PCR_SLOT_1_VCC0 (1<<10) -# define PCR_SLOT_1_VCC1 (1<<11) -# define PCR_SLOT_1_RST (1<<12) - -#define PB1000_MDR 0xBE000004 -# define MDR_PI (1<<5) /* pcmcia int latch */ -# define MDR_EPI (1<<14) /* enable pcmcia int */ -# define MDR_CPI (1<<15) /* clear pcmcia int */ - -#define PB1000_ACR1 0xBE000008 -# define ACR1_SLOT_0_CD1 (1<<0) /* card detect 1 */ -# define ACR1_SLOT_0_CD2 (1<<1) /* card detect 2 */ -# define ACR1_SLOT_0_READY (1<<2) /* ready */ -# define ACR1_SLOT_0_STATUS (1<<3) /* status change */ -# define ACR1_SLOT_0_VS1 (1<<4) /* voltage sense 1 */ -# define ACR1_SLOT_0_VS2 (1<<5) /* voltage sense 2 */ -# define ACR1_SLOT_0_INPACK (1<<6) /* inpack pin status */ -# define ACR1_SLOT_1_CD1 (1<<8) /* card detect 1 */ -# define ACR1_SLOT_1_CD2 (1<<9) /* card detect 2 */ -# define ACR1_SLOT_1_READY (1<<10) /* ready */ -# define ACR1_SLOT_1_STATUS (1<<11) /* status change */ -# define ACR1_SLOT_1_VS1 (1<<12) /* voltage sense 1 */ -# define ACR1_SLOT_1_VS2 (1<<13) /* voltage sense 2 */ -# define ACR1_SLOT_1_INPACK (1<<14) /* inpack pin status */ - -#define CPLD_AUX0 0xBE00000C -#define CPLD_AUX1 0xBE000010 -#define CPLD_AUX2 0xBE000014 +#define PCMCIA_MAX_SOCK 1 +#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) + +#define PB1000_PCR 0xBE000000 +# define PCR_SLOT_0_VPP0 (1 << 0) +# define PCR_SLOT_0_VPP1 (1 << 1) +# define PCR_SLOT_0_VCC0 (1 << 2) +# define PCR_SLOT_0_VCC1 (1 << 3) +# define PCR_SLOT_0_RST (1 << 4) +# define PCR_SLOT_1_VPP0 (1 << 8) +# define PCR_SLOT_1_VPP1 (1 << 9) +# define PCR_SLOT_1_VCC0 (1 << 10) +# define PCR_SLOT_1_VCC1 (1 << 11) +# define PCR_SLOT_1_RST (1 << 12) + +#define PB1000_MDR 0xBE000004 +# define MDR_PI (1 << 5) /* PCMCIA int latch */ +# define MDR_EPI (1 << 14) /* enable PCMCIA int */ +# define MDR_CPI (1 << 15) /* clear PCMCIA int */ + +#define PB1000_ACR1 0xBE000008 +# define ACR1_SLOT_0_CD1 (1 << 0) /* card detect 1 */ +# define ACR1_SLOT_0_CD2 (1 << 1) /* card detect 2 */ +# define ACR1_SLOT_0_READY (1 << 2) /* ready */ +# define ACR1_SLOT_0_STATUS (1 << 3) /* status change */ +# define ACR1_SLOT_0_VS1 (1 << 4) /* voltage sense 1 */ +# define ACR1_SLOT_0_VS2 (1 << 5) /* voltage sense 2 */ +# define ACR1_SLOT_0_INPACK (1 << 6) /* inpack pin status */ +# define ACR1_SLOT_1_CD1 (1 << 8) /* card detect 1 */ +# define ACR1_SLOT_1_CD2 (1 << 9) /* card detect 2 */ +# define ACR1_SLOT_1_READY (1 << 10) /* ready */ +# define ACR1_SLOT_1_STATUS (1 << 11) /* status change */ +# define ACR1_SLOT_1_VS1 (1 << 12) /* voltage sense 1 */ +# define ACR1_SLOT_1_VS2 (1 << 13) /* voltage sense 2 */ +# define ACR1_SLOT_1_INPACK (1 << 14) /* inpack pin status */ + +#define CPLD_AUX0 0xBE00000C +#define CPLD_AUX1 0xBE000010 +#define CPLD_AUX2 0xBE000014 /* Voltage levels */ /* VPPEN1 - VPPEN0 */ -#define VPP_GND ((0<<1) | (0<<0)) -#define VPP_5V ((1<<1) | (0<<0)) -#define VPP_3V ((0<<1) | (1<<0)) -#define VPP_12V ((0<<1) | (1<<0)) -#define VPP_HIZ ((1<<1) | (1<<0)) +#define VPP_GND ((0 << 1) | (0 << 0)) +#define VPP_5V ((1 << 1) | (0 << 0)) +#define VPP_3V ((0 << 1) | (1 << 0)) +#define VPP_12V ((0 << 1) | (1 << 0)) +#define VPP_HIZ ((1 << 1) | (1 << 0)) /* VCCEN1 - VCCEN0 */ -#define VCC_3V ((0<<1) | (1<<0)) -#define VCC_5V ((1<<1) | (0<<0)) -#define VCC_HIZ ((0<<1) | (0<<0)) +#define VCC_3V ((0 << 1) | (1 << 0)) +#define VCC_5V ((1 << 1) | (0 << 0)) +#define VCC_HIZ ((0 << 1) | (0 << 0)) /* VPP/VCC */ -#define SET_VCC_VPP(VCC, VPP, SLOT)\ - ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8)) - - -/* PCI PB1000 specific defines */ -/* The reason these defines are here instead of au1000.h is because - * the Au1000 does not have a PCI bus controller so the PCI implementation - * on the some of the older Pb1000 boards was very board specific. - */ -#define PCI_CONFIG_BASE 0xBA020000 /* the only external slot */ - -#define SDRAM_DEVID 0xBA010000 -#define SDRAM_CMD 0xBA010004 -#define SDRAM_CLASS 0xBA010008 -#define SDRAM_MISC 0xBA01000C -#define SDRAM_MBAR 0xBA010010 - -#define PCI_IO_DATA_PORT 0xBA800000 - -#define PCI_IO_ADDR 0xBE00001C -#define PCI_INT_ACK 0xBBC00000 -#define PCI_IO_READ 0xBBC00020 -#define PCI_IO_WRITE 0xBBC00030 - -#define PCI_BRIDGE_CONFIG 0xBE000018 - -#define PCI_IO_START 0x10000000 -#define PCI_IO_END 0x1000ffff -#define PCI_MEM_START 0x18000000 -#define PCI_MEM_END 0x18ffffff - -#define PCI_FIRST_DEVFN 0 -#define PCI_LAST_DEVFN 1 - -static inline u8 au_pci_io_readb(u32 addr) -{ - writel(addr, PCI_IO_ADDR); - writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<12), PCI_BRIDGE_CONFIG); - return (readl(PCI_IO_DATA_PORT) & 0xff); -} - -static inline u16 au_pci_io_readw(u32 addr) -{ - writel(addr, PCI_IO_ADDR); - writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<13), PCI_BRIDGE_CONFIG); - return (readl(PCI_IO_DATA_PORT) & 0xffff); -} - -static inline u32 au_pci_io_readl(u32 addr) -{ - writel(addr, PCI_IO_ADDR); - writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff), PCI_BRIDGE_CONFIG); - return readl(PCI_IO_DATA_PORT); -} - -static inline void au_pci_io_writeb(u8 val, u32 addr) -{ - writel(addr, PCI_IO_ADDR); - writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<12), PCI_BRIDGE_CONFIG); - writel(val, PCI_IO_DATA_PORT); -} - -static inline void au_pci_io_writew(u16 val, u32 addr) -{ - writel(addr, PCI_IO_ADDR); - writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<13), PCI_BRIDGE_CONFIG); - writel(val, PCI_IO_DATA_PORT); -} - -static inline void au_pci_io_writel(u32 val, u32 addr) -{ - writel(addr, PCI_IO_ADDR); - writel(readl(PCI_BRIDGE_CONFIG) & 0xffffcfff, PCI_BRIDGE_CONFIG); - writel(val, PCI_IO_DATA_PORT); -} - -static inline void set_sdram_extbyte(void) -{ - writel(readl(PCI_BRIDGE_CONFIG) & 0xffffff00, PCI_BRIDGE_CONFIG); -} - -static inline void set_slot_extbyte(void) -{ - writel((readl(PCI_BRIDGE_CONFIG) & 0xffffbf00) | 0x18, PCI_BRIDGE_CONFIG); -} +#define SET_VCC_VPP(VCC, VPP, SLOT) \ + ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8)) #endif /* __ASM_PB1000_H */ diff --git a/include/asm-mips/mach-pb1x00/pb1100.h b/include/asm-mips/mach-pb1x00/pb1100.h index 63aa3926b297..b1a60f1cbd02 100644 --- a/include/asm-mips/mach-pb1x00/pb1100.h +++ b/include/asm-mips/mach-pb1x00/pb1100.h @@ -1,9 +1,8 @@ /* - * Alchemy Semi PB1100 Referrence Board + * Alchemy Semi Pb1100 Referrence Board * - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> * * ######################################################################## * @@ -27,59 +26,60 @@ #ifndef __ASM_PB1100_H #define __ASM_PB1100_H -#define PB1100_IDENT 0xAE000000 -#define BOARD_STATUS_REG 0xAE000004 -# define PB1100_ROM_SEL (1<<15) -# define PB1100_ROM_SIZ (1<<14) -# define PB1100_SWAP_BOOT (1<<13) -# define PB1100_FLASH_WP (1<<12) -# define PB1100_ROM_H_STS (1<<11) -# define PB1100_ROM_L_STS (1<<10) -# define PB1100_FLASH_H_STS (1<<9) -# define PB1100_FLASH_L_STS (1<<8) -# define PB1100_SRAM_SIZ (1<<7) -# define PB1100_TSC_BUSY (1<<6) -# define PB1100_PCMCIA_VS_MASK (3<<4) -# define PB1100_RS232_CD (1<<3) -# define PB1100_RS232_CTS (1<<2) -# define PB1100_RS232_DSR (1<<1) -# define PB1100_RS232_RI (1<<0) +#define PB1100_IDENT 0xAE000000 +#define BOARD_STATUS_REG 0xAE000004 +# define PB1100_ROM_SEL (1 << 15) +# define PB1100_ROM_SIZ (1 << 14) +# define PB1100_SWAP_BOOT (1 << 13) +# define PB1100_FLASH_WP (1 << 12) +# define PB1100_ROM_H_STS (1 << 11) +# define PB1100_ROM_L_STS (1 << 10) +# define PB1100_FLASH_H_STS (1 << 9) +# define PB1100_FLASH_L_STS (1 << 8) +# define PB1100_SRAM_SIZ (1 << 7) +# define PB1100_TSC_BUSY (1 << 6) +# define PB1100_PCMCIA_VS_MASK (3 << 4) +# define PB1100_RS232_CD (1 << 3) +# define PB1100_RS232_CTS (1 << 2) +# define PB1100_RS232_DSR (1 << 1) +# define PB1100_RS232_RI (1 << 0) -#define PB1100_IRDA_RS232 0xAE00000C -# define PB1100_IRDA_FULL (0<<14) /* full power */ -# define PB1100_IRDA_SHUTDOWN (1<<14) -# define PB1100_IRDA_TT (2<<14) /* 2/3 power */ -# define PB1100_IRDA_OT (3<<14) /* 1/3 power */ -# define PB1100_IRDA_FIR (1<<13) +#define PB1100_IRDA_RS232 0xAE00000C +# define PB1100_IRDA_FULL (0 << 14) /* full power */ +# define PB1100_IRDA_SHUTDOWN (1 << 14) +# define PB1100_IRDA_TT (2 << 14) /* 2/3 power */ +# define PB1100_IRDA_OT (3 << 14) /* 1/3 power */ +# define PB1100_IRDA_FIR (1 << 13) -#define PCMCIA_BOARD_REG 0xAE000010 -# define PB1100_SD_WP1_RO (1<<15) /* read only */ -# define PB1100_SD_WP0_RO (1<<14) /* read only */ -# define PB1100_SD_PWR1 (1<<11) /* applies power to SD1 */ -# define PB1100_SD_PWR0 (1<<10) /* applies power to SD0 */ -# define PB1100_SEL_SD_CONN1 (1<<9) -# define PB1100_SEL_SD_CONN0 (1<<8) -# define PC_DEASSERT_RST (1<<7) -# define PC_DRV_EN (1<<4) +#define PCMCIA_BOARD_REG 0xAE000010 +# define PB1100_SD_WP1_RO (1 << 15) /* read only */ +# define PB1100_SD_WP0_RO (1 << 14) /* read only */ +# define PB1100_SD_PWR1 (1 << 11) /* applies power to SD1 */ +# define PB1100_SD_PWR0 (1 << 10) /* applies power to SD0 */ +# define PB1100_SEL_SD_CONN1 (1 << 9) +# define PB1100_SEL_SD_CONN0 (1 << 8) +# define PC_DEASSERT_RST (1 << 7) +# define PC_DRV_EN (1 << 4) -#define PB1100_G_CONTROL 0xAE000014 /* graphics control */ +#define PB1100_G_CONTROL 0xAE000014 /* graphics control */ -#define PB1100_RST_VDDI 0xAE00001C -# define PB1100_SOFT_RESET (1<<15) /* clear to reset the board */ -# define PB1100_VDDI_MASK (0x1F) +#define PB1100_RST_VDDI 0xAE00001C +# define PB1100_SOFT_RESET (1 << 15) /* clear to reset the board */ +# define PB1100_VDDI_MASK 0x1F -#define PB1100_LEDS 0xAE000018 +#define PB1100_LEDS 0xAE000018 -/* 11:8 is 4 discreet LEDs. Clearing a bit illuminates the LED. - * 7:0 is the LED Display's decimal points. +/* + * 11:8 is 4 discreet LEDs. Clearing a bit illuminates the LED. + * 7:0 is the LED Display's decimal points. */ -#define PB1100_HEX_LED 0xAE000018 +#define PB1100_HEX_LED 0xAE000018 -/* PCMCIA PB1100 specific defines */ -#define PCMCIA_MAX_SOCK 0 -#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1) +/* PCMCIA Pb1100 specific defines */ +#define PCMCIA_MAX_SOCK 0 +#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) /* VPP/VCC */ -#define SET_VCC_VPP(VCC, VPP) (((VCC)<<2) | ((VPP)<<0)) +#define SET_VCC_VPP(VCC, VPP) (((VCC) << 2) | ((VPP) << 0)) #endif /* __ASM_PB1100_H */ diff --git a/include/asm-mips/mach-pb1x00/pb1200.h b/include/asm-mips/mach-pb1x00/pb1200.h index e2c6bcac3b42..c8618df88cb5 100644 --- a/include/asm-mips/mach-pb1x00/pb1200.h +++ b/include/asm-mips/mach-pb1x00/pb1200.h @@ -1,5 +1,5 @@ /* - * AMD Alchemy PB1200 Referrence Board + * AMD Alchemy Pb1200 Referrence Board * Board Registers defines. * * ######################################################################## @@ -27,21 +27,20 @@ #include <linux/types.h> #include <asm/mach-au1x00/au1xxx_psc.h> -// This is defined in au1000.h with bogus value -#undef AU1X00_EXTERNAL_INT +#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX +#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX +#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX +#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX -#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX -#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX -#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX -#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX - -/* SPI and SMB are muxed on the Pb1200 board. - Refer to board documentation. +/* + * SPI and SMB are muxed on the Pb1200 board. + * Refer to board documentation. */ -#define SPI_PSC_BASE PSC0_BASE_ADDR -#define SMBUS_PSC_BASE PSC0_BASE_ADDR -/* AC97 and I2S are muxed on the Pb1200 board. - Refer to board documentation. +#define SPI_PSC_BASE PSC0_BASE_ADDR +#define SMBUS_PSC_BASE PSC0_BASE_ADDR +/* + * AC97 and I2S are muxed on the Pb1200 board. + * Refer to board documentation. */ #define AC97_PSC_BASE PSC1_BASE_ADDR #define I2S_PSC_BASE PSC1_BASE_ADDR @@ -102,10 +101,10 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define BCSR_STATUS_SWAPBOOT 0x0040 #define BCSR_STATUS_FLASHBUSY 0x0100 #define BCSR_STATUS_IDECBLID 0x0200 -#define BCSR_STATUS_SD0WP 0x0400 -#define BCSR_STATUS_SD1WP 0x0800 -#define BCSR_STATUS_U0RXD 0x1000 -#define BCSR_STATUS_U1RXD 0x2000 +#define BCSR_STATUS_SD0WP 0x0400 +#define BCSR_STATUS_SD1WP 0x0800 +#define BCSR_STATUS_U0RXD 0x1000 +#define BCSR_STATUS_U1RXD 0x2000 #define BCSR_SWITCHES_OCTAL 0x00FF #define BCSR_SWITCHES_DIP_1 0x0080 @@ -123,11 +122,11 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define BCSR_RESETS_DC 0x0004 #define BCSR_RESETS_IDE 0x0008 /* not resets but in the same register */ -#define BCSR_RESETS_WSCFSM 0x0800 +#define BCSR_RESETS_WSCFSM 0x0800 #define BCSR_RESETS_PCS0MUX 0x1000 #define BCSR_RESETS_PCS1MUX 0x2000 #define BCSR_RESETS_SPISEL 0x4000 -#define BCSR_RESETS_SD1MUX 0x8000 +#define BCSR_RESETS_SD1MUX 0x8000 #define BCSR_PCMCIA_PC0VPP 0x0003 #define BCSR_PCMCIA_PC0VCC 0x000C @@ -163,7 +162,7 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define BCSR_INT_PC0STSCHG 0x0008 #define BCSR_INT_PC1 0x0010 #define BCSR_INT_PC1STSCHG 0x0020 -#define BCSR_INT_DC 0x0040 +#define BCSR_INT_DC 0x0040 #define BCSR_INT_FLASHBUSY 0x0080 #define BCSR_INT_PC0INSERT 0x0100 #define BCSR_INT_PC0EJECT 0x0200 @@ -174,14 +173,6 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define BCSR_INT_SD1INSERT 0x4000 #define BCSR_INT_SD1EJECT 0x8000 -/* PCMCIA Db1x00 specific defines */ -#define PCMCIA_MAX_SOCK 1 -#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1) - -/* VPP/VCC */ -#define SET_VCC_VPP(VCC, VPP, SLOT)\ - ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8)) - #define SMC91C111_PHYS_ADDR 0x0D000300 #define SMC91C111_INT PB1200_ETH_INT @@ -192,18 +183,19 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define IDE_DDMA_REQ DSCR_CMD0_DMA_REQ1 #define IDE_RQSIZE 128 -#define NAND_PHYS_ADDR 0x1C000000 +#define NAND_PHYS_ADDR 0x1C000000 -/* Timing values as described in databook, * ns value stripped of +/* + * Timing values as described in databook, * ns value stripped of * lower 2 bits. - * These defines are here rather than an SOC1200 generic file because + * These defines are here rather than an Au1200 generic file because * the parts chosen on another board may be different and may require * different timings. */ -#define NAND_T_H (18 >> 2) -#define NAND_T_PUL (30 >> 2) -#define NAND_T_SU (30 >> 2) -#define NAND_T_WH (30 >> 2) +#define NAND_T_H (18 >> 2) +#define NAND_T_PUL (30 >> 2) +#define NAND_T_SU (30 >> 2) +#define NAND_T_WH (30 >> 2) /* Bitfield shift amounts */ #define NAND_T_H_SHIFT 0 @@ -211,11 +203,10 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define NAND_T_SU_SHIFT 8 #define NAND_T_WH_SHIFT 12 -#define NAND_TIMING ((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \ - ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \ - ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \ - ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT) - +#define NAND_TIMING (((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \ + ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \ + ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \ + ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)) /* * External Interrupts for Pb1200 as of 8/6/2004. @@ -248,13 +239,21 @@ enum external_pb1200_ints { PB1200_INT_END = PB1200_INT_BEGIN + 15 }; -/* For drivers/pcmcia/au1000_db1x00.c */ -#define BOARD_PC0_INT PB1200_PC0_INT -#define BOARD_PC1_INT PB1200_PC1_INT -#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1<<(8+(2*SOCKET))) +/* + * Pb1200 specific PCMCIA defines for drivers/pcmcia/au1000_db1x00.c + */ +#define PCMCIA_MAX_SOCK 1 +#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) -/* Nand chip select */ +/* VPP/VCC */ +#define SET_VCC_VPP(VCC, VPP, SLOT) \ + ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8)) + +#define BOARD_PC0_INT PB1200_PC0_INT +#define BOARD_PC1_INT PB1200_PC1_INT +#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1 << (8 + (2 * SOCKET))) + +/* NAND chip select */ #define NAND_CS 1 #endif /* __ASM_PB1200_H */ - diff --git a/include/asm-mips/mach-pb1x00/pb1500.h b/include/asm-mips/mach-pb1x00/pb1500.h index ff6d40c87a25..da51a2eb7b82 100644 --- a/include/asm-mips/mach-pb1x00/pb1500.h +++ b/include/asm-mips/mach-pb1x00/pb1500.h @@ -1,9 +1,8 @@ /* - * Alchemy Semi PB1500 Referrence Board + * Alchemy Semi Pb1500 Referrence Board * - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> * * ######################################################################## * @@ -27,25 +26,24 @@ #ifndef __ASM_PB1500_H #define __ASM_PB1500_H +#define IDENT_BOARD_REG 0xAE000000 +#define BOARD_STATUS_REG 0xAE000004 +#define PCI_BOARD_REG 0xAE000010 +#define PCMCIA_BOARD_REG 0xAE000010 +# define PC_DEASSERT_RST 0x80 +# define PC_DRV_EN 0x10 +#define PB1500_G_CONTROL 0xAE000014 +#define PB1500_RST_VDDI 0xAE00001C +#define PB1500_LEDS 0xAE000018 -#define IDENT_BOARD_REG 0xAE000000 -#define BOARD_STATUS_REG 0xAE000004 -#define PCI_BOARD_REG 0xAE000010 -#define PCMCIA_BOARD_REG 0xAE000010 - #define PC_DEASSERT_RST 0x80 - #define PC_DRV_EN 0x10 -#define PB1500_G_CONTROL 0xAE000014 -#define PB1500_RST_VDDI 0xAE00001C -#define PB1500_LEDS 0xAE000018 +#define PB1500_HEX_LED 0xAF000004 +#define PB1500_HEX_LED_BLANK 0xAF000008 -#define PB1500_HEX_LED 0xAF000004 -#define PB1500_HEX_LED_BLANK 0xAF000008 - -/* PCMCIA PB1500 specific defines */ -#define PCMCIA_MAX_SOCK 0 -#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1) +/* PCMCIA Pb1500 specific defines */ +#define PCMCIA_MAX_SOCK 0 +#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) /* VPP/VCC */ -#define SET_VCC_VPP(VCC, VPP) (((VCC)<<2) | ((VPP)<<0)) +#define SET_VCC_VPP(VCC, VPP) (((VCC) << 2) | ((VPP) << 0)) #endif /* __ASM_PB1500_H */ diff --git a/include/asm-mips/mach-pb1x00/pb1550.h b/include/asm-mips/mach-pb1x00/pb1550.h index c2ab0e2df4ae..6704a11497db 100644 --- a/include/asm-mips/mach-pb1x00/pb1550.h +++ b/include/asm-mips/mach-pb1x00/pb1550.h @@ -30,15 +30,15 @@ #include <linux/types.h> #include <asm/mach-au1x00/au1xxx_psc.h> -#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX -#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX -#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX -#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX +#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX +#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX +#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX +#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX -#define SPI_PSC_BASE PSC0_BASE_ADDR -#define AC97_PSC_BASE PSC1_BASE_ADDR -#define SMBUS_PSC_BASE PSC2_BASE_ADDR -#define I2S_PSC_BASE PSC3_BASE_ADDR +#define SPI_PSC_BASE PSC0_BASE_ADDR +#define AC97_PSC_BASE PSC1_BASE_ADDR +#define SMBUS_PSC_BASE PSC2_BASE_ADDR +#define I2S_PSC_BASE PSC3_BASE_ADDR #define BCSR_PHYS_ADDR 0xAF000000 @@ -129,12 +129,12 @@ static BCSR * const bcsr = (BCSR *)BCSR_PHYS_ADDR; #define BCSR_SYSTEM_POWEROFF 0x4000 #define BCSR_SYSTEM_RESET 0x8000 -#define PCMCIA_MAX_SOCK 1 -#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1) +#define PCMCIA_MAX_SOCK 1 +#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) /* VPP/VCC */ -#define SET_VCC_VPP(VCC, VPP, SLOT)\ - ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8)) +#define SET_VCC_VPP(VCC, VPP, SLOT) \ + ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8)) #if defined(CONFIG_MTD_PB1550_BOOT) && defined(CONFIG_MTD_PB1550_USER) #define PB1550_BOTH_BANKS @@ -144,16 +144,17 @@ static BCSR * const bcsr = (BCSR *)BCSR_PHYS_ADDR; #define PB1550_USER_ONLY #endif -/* Timing values as described in databook, * ns value stripped of +/* + * Timing values as described in databook, * ns value stripped of * lower 2 bits. * These defines are here rather than an SOC1550 generic file because * the parts chosen on another board may be different and may require * different timings. */ -#define NAND_T_H (18 >> 2) -#define NAND_T_PUL (30 >> 2) -#define NAND_T_SU (30 >> 2) -#define NAND_T_WH (30 >> 2) +#define NAND_T_H (18 >> 2) +#define NAND_T_PUL (30 >> 2) +#define NAND_T_SU (30 >> 2) +#define NAND_T_WH (30 >> 2) /* Bitfield shift amounts */ #define NAND_T_H_SHIFT 0 @@ -161,16 +162,16 @@ static BCSR * const bcsr = (BCSR *)BCSR_PHYS_ADDR; #define NAND_T_SU_SHIFT 8 #define NAND_T_WH_SHIFT 12 -#define NAND_TIMING ((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \ - ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \ - ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \ - ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT) +#define NAND_TIMING (((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \ + ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \ + ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \ + ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)) #define NAND_CS 1 -/* should be done by yamon */ -#define NAND_STCFG 0x00400005 /* 8-bit NAND */ -#define NAND_STTIME 0x00007774 /* valid for 396MHz SD=2 only */ -#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */ +/* Should be done by YAMON */ +#define NAND_STCFG 0x00400005 /* 8-bit NAND */ +#define NAND_STTIME 0x00007774 /* valid for 396 MHz SD=2 only */ +#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */ #endif /* __ASM_PB1550_H */ diff --git a/include/asm-mips/rtlx.h b/include/asm-mips/rtlx.h index 65778c890a62..20b666022dcb 100644 --- a/include/asm-mips/rtlx.h +++ b/include/asm-mips/rtlx.h @@ -29,13 +29,13 @@ extern unsigned int rtlx_read_poll(int index, int can_sleep); extern unsigned int rtlx_write_poll(int index); enum rtlx_state { - RTLX_STATE_UNUSED, + RTLX_STATE_UNUSED = 0, RTLX_STATE_INITIALISED, RTLX_STATE_REMOTE_READY, RTLX_STATE_OPENED }; -#define RTLX_BUFFER_SIZE 1024 +#define RTLX_BUFFER_SIZE 2048 /* each channel supports read and write. linux (vpe0) reads lx_buffer and writes rt_buffer |