summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorDavid Brownell <dbrownell@users.sourceforge.net>2009-06-30 11:41:26 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2009-06-30 18:56:00 -0700
commitb55f627feeb9d48fdbde3835e18afbc76712e49b (patch)
tree1c6084d44f23c5e70040e5d62c93718f77ad09da
parentc49568235dd7b4a2ffad63aa950562f4ffb9455f (diff)
spi: new spi->mode bits
Add two new spi_device.mode bits to accomodate more protocol options, and pass them through to usermode drivers: * SPI_NO_CS ... a second 3-wire variant, where the chipselect line is removed instead of a data line; transfers are still full duplex. This obviously has STRONG protocol implications since the chipselect transitions can't be used to synchronize state transitions with the SPI master. * SPI_READY ... defines open drain signal that's pulled low to pause the clock. This defines a 5-wire variant (normal 4-wire SPI plus READY) and two 4-wire variants (READY plus each of the 3-wire flavors). Such hardware flow control can be a big win. There are ADC converters and flash chips that expose READY signals, but not many host controllers support it today. The spi_bitbang code should be changed to use SPI_NO_CS instead of its current nonportable hack. That's a mode most hardware can easily support (unlike SPI_READY). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: "Paulraj, Sandeep" <s-paulraj@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-rw-r--r--Documentation/spi/spidev_test.c10
-rw-r--r--drivers/spi/spidev.c17
-rw-r--r--include/linux/spi/spi.h2
-rw-r--r--include/linux/spi/spidev.h2
4 files changed, 24 insertions, 7 deletions
diff --git a/Documentation/spi/spidev_test.c b/Documentation/spi/spidev_test.c
index cf0e3ce0d526..c1a5aad3c75a 100644
--- a/Documentation/spi/spidev_test.c
+++ b/Documentation/spi/spidev_test.c
@@ -99,11 +99,13 @@ void parse_opts(int argc, char *argv[])
{ "lsb", 0, 0, 'L' },
{ "cs-high", 0, 0, 'C' },
{ "3wire", 0, 0, '3' },
+ { "no-cs", 0, 0, 'N' },
+ { "ready", 0, 0, 'R' },
{ NULL, 0, 0, 0 },
};
int c;
- c = getopt_long(argc, argv, "D:s:d:b:lHOLC3", lopts, NULL);
+ c = getopt_long(argc, argv, "D:s:d:b:lHOLC3NR", lopts, NULL);
if (c == -1)
break;
@@ -139,6 +141,12 @@ void parse_opts(int argc, char *argv[])
case '3':
mode |= SPI_3WIRE;
break;
+ case 'N':
+ mode |= SPI_NO_CS;
+ break;
+ case 'R':
+ mode |= SPI_READY;
+ break;
default:
print_usage(argv[0]);
break;
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index 5d869c4d3eb2..606e7a40a8da 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -58,15 +58,20 @@ static unsigned long minors[N_SPI_MINORS / BITS_PER_LONG];
/* Bit masks for spi_device.mode management. Note that incorrect
- * settings for CS_HIGH and 3WIRE can cause *lots* of trouble for other
- * devices on a shared bus: CS_HIGH, because this device will be
- * active when it shouldn't be; 3WIRE, because when active it won't
- * behave as it should.
+ * settings for some settings can cause *lots* of trouble for other
+ * devices on a shared bus:
*
- * REVISIT should changing those two modes be privileged?
+ * - CS_HIGH ... this device will be active when it shouldn't be
+ * - 3WIRE ... when active, it won't behave as it should
+ * - NO_CS ... there will be no explicit message boundaries; this
+ * is completely incompatible with the shared bus model
+ * - READY ... transfers may proceed when they shouldn't.
+ *
+ * REVISIT should changing those flags be privileged?
*/
#define SPI_MODE_MASK (SPI_CPHA | SPI_CPOL | SPI_CS_HIGH \
- | SPI_LSB_FIRST | SPI_3WIRE | SPI_LOOP)
+ | SPI_LSB_FIRST | SPI_3WIRE | SPI_LOOP \
+ | SPI_NO_CS | SPI_READY)
struct spidev_data {
dev_t devt;
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 9c4cd27f4685..743c933ac4e7 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -80,6 +80,8 @@ struct spi_device {
#define SPI_LSB_FIRST 0x08 /* per-word bits-on-wire */
#define SPI_3WIRE 0x10 /* SI/SO signals shared */
#define SPI_LOOP 0x20 /* loopback mode */
+#define SPI_NO_CS 0x40 /* 1 dev/bus, no chipselect */
+#define SPI_READY 0x80 /* slave pulls low to pause */
u8 bits_per_word;
int irq;
void *controller_state;
diff --git a/include/linux/spi/spidev.h b/include/linux/spi/spidev.h
index 95251ccd5a07..bf0570a84f7a 100644
--- a/include/linux/spi/spidev.h
+++ b/include/linux/spi/spidev.h
@@ -40,6 +40,8 @@
#define SPI_LSB_FIRST 0x08
#define SPI_3WIRE 0x10
#define SPI_LOOP 0x20
+#define SPI_NO_CS 0x40
+#define SPI_READY 0x80
/*---------------------------------------------------------------------------*/