summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorJames Bottomley <James.Bottomley@HansenPartnership.com>2007-12-28 16:35:17 -0600
committerJames Bottomley <James.Bottomley@HansenPartnership.com>2008-01-11 18:29:11 -0600
commitb98e66fa0b687149dc3b26179096dc542c7d5001 (patch)
treed08e0192f53ef4fc0655b38835f2beb9e3c826cb
parent38b3167f75c9508156b974d19692c19b78292e2e (diff)
[SCSI] libsas: add host SMP processing
This adds support for host side SMP processing, via a separate SMP interpreter file. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-rw-r--r--drivers/scsi/libsas/Kconfig9
-rw-r--r--drivers/scsi/libsas/Makefile1
-rw-r--r--drivers/scsi/libsas/sas_expander.c8
-rw-r--r--drivers/scsi/libsas/sas_host_smp.c274
-rw-r--r--drivers/scsi/libsas/sas_internal.h14
-rw-r--r--include/scsi/scsi_transport_sas.h8
6 files changed, 305 insertions, 9 deletions
diff --git a/drivers/scsi/libsas/Kconfig b/drivers/scsi/libsas/Kconfig
index c01a40d321d4..18f33cd54411 100644
--- a/drivers/scsi/libsas/Kconfig
+++ b/drivers/scsi/libsas/Kconfig
@@ -38,6 +38,15 @@ config SCSI_SAS_ATA
Builds in ATA support into libsas. Will necessitate
the loading of libata along with libsas.
+config SCSI_SAS_HOST_SMP
+ bool "Support for SMP interpretation for SAS hosts"
+ default y
+ depends on SCSI_SAS_LIBSAS
+ help
+ Allows sas hosts to receive SMP frames. Selecting this
+ option builds an SMP interpreter into libsas. Say
+ N here if you want to save the few kb this consumes.
+
config SCSI_SAS_LIBSAS_DEBUG
bool "Compile the SAS Domain Transport Attributes in debug mode"
default y
diff --git a/drivers/scsi/libsas/Makefile b/drivers/scsi/libsas/Makefile
index fd387b91856e..60d6e93dd949 100644
--- a/drivers/scsi/libsas/Makefile
+++ b/drivers/scsi/libsas/Makefile
@@ -35,3 +35,4 @@ libsas-y += sas_init.o \
sas_expander.o \
sas_scsi_host.o
libsas-$(CONFIG_SCSI_SAS_ATA) += sas_ata.o
+libsas-$(CONFIG_SCSI_SAS_HOST_SMP) += sas_host_smp.o \ No newline at end of file
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index 27674fe468f5..76555b1ddfd5 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -1896,11 +1896,9 @@ int sas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
}
/* no rphy means no smp target support (ie aic94xx host) */
- if (!rphy) {
- printk("%s: can we send a smp request to a host?\n",
- __FUNCTION__);
- return -EINVAL;
- }
+ if (!rphy)
+ return sas_smp_host_handler(shost, req, rsp);
+
type = rphy->identify.device_type;
if (type != SAS_EDGE_EXPANDER_DEVICE &&
diff --git a/drivers/scsi/libsas/sas_host_smp.c b/drivers/scsi/libsas/sas_host_smp.c
new file mode 100644
index 000000000000..16f93123271e
--- /dev/null
+++ b/drivers/scsi/libsas/sas_host_smp.c
@@ -0,0 +1,274 @@
+/*
+ * Serial Attached SCSI (SAS) Expander discovery and configuration
+ *
+ * Copyright (C) 2007 James E.J. Bottomley
+ * <James.Bottomley@HansenPartnership.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 only.
+ */
+#include <linux/scatterlist.h>
+#include <linux/blkdev.h>
+
+#include "sas_internal.h"
+
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_sas.h>
+#include "../scsi_sas_internal.h"
+
+static void sas_host_smp_discover(struct sas_ha_struct *sas_ha, u8 *resp_data,
+ u8 phy_id)
+{
+ struct sas_phy *phy;
+ struct sas_rphy *rphy;
+
+ if (phy_id >= sas_ha->num_phys) {
+ resp_data[2] = SMP_RESP_NO_PHY;
+ return;
+ }
+ resp_data[2] = SMP_RESP_FUNC_ACC;
+
+ phy = sas_ha->sas_phy[phy_id]->phy;
+ resp_data[9] = phy_id;
+ resp_data[13] = phy->negotiated_linkrate;
+ memcpy(resp_data + 16, sas_ha->sas_addr, SAS_ADDR_SIZE);
+ memcpy(resp_data + 24, sas_ha->sas_phy[phy_id]->attached_sas_addr,
+ SAS_ADDR_SIZE);
+ resp_data[40] = (phy->minimum_linkrate << 4) |
+ phy->minimum_linkrate_hw;
+ resp_data[41] = (phy->maximum_linkrate << 4) |
+ phy->maximum_linkrate_hw;
+
+ if (!sas_ha->sas_phy[phy_id]->port ||
+ !sas_ha->sas_phy[phy_id]->port->port_dev)
+ return;
+
+ rphy = sas_ha->sas_phy[phy_id]->port->port_dev->rphy;
+ resp_data[12] = rphy->identify.device_type << 4;
+ resp_data[14] = rphy->identify.initiator_port_protocols;
+ resp_data[15] = rphy->identify.target_port_protocols;
+}
+
+static void sas_report_phy_sata(struct sas_ha_struct *sas_ha, u8 *resp_data,
+ u8 phy_id)
+{
+ struct sas_rphy *rphy;
+ struct dev_to_host_fis *fis;
+ int i;
+
+ if (phy_id >= sas_ha->num_phys) {
+ resp_data[2] = SMP_RESP_NO_PHY;
+ return;
+ }
+
+ resp_data[2] = SMP_RESP_PHY_NO_SATA;
+
+ if (!sas_ha->sas_phy[phy_id]->port)
+ return;
+
+ rphy = sas_ha->sas_phy[phy_id]->port->port_dev->rphy;
+ fis = (struct dev_to_host_fis *)
+ sas_ha->sas_phy[phy_id]->port->port_dev->frame_rcvd;
+ if (rphy->identify.target_port_protocols != SAS_PROTOCOL_SATA)
+ return;
+
+ resp_data[2] = SMP_RESP_FUNC_ACC;
+ resp_data[9] = phy_id;
+ memcpy(resp_data + 16, sas_ha->sas_phy[phy_id]->attached_sas_addr,
+ SAS_ADDR_SIZE);
+
+ /* check to see if we have a valid d2h fis */
+ if (fis->fis_type != 0x34)
+ return;
+
+ /* the d2h fis is required by the standard to be in LE format */
+ for (i = 0; i < 20; i += 4) {
+ u8 *dst = resp_data + 24 + i, *src =
+ &sas_ha->sas_phy[phy_id]->port->port_dev->frame_rcvd[i];
+ dst[0] = src[3];
+ dst[1] = src[2];
+ dst[2] = src[1];
+ dst[3] = src[0];
+ }
+}
+
+static void sas_phy_control(struct sas_ha_struct *sas_ha, u8 phy_id,
+ u8 phy_op, enum sas_linkrate min,
+ enum sas_linkrate max, u8 *resp_data)
+{
+ struct sas_internal *i =
+ to_sas_internal(sas_ha->core.shost->transportt);
+ struct sas_phy_linkrates rates;
+
+ if (phy_id >= sas_ha->num_phys) {
+ resp_data[2] = SMP_RESP_NO_PHY;
+ return;
+ }
+ switch (phy_op) {
+ case PHY_FUNC_NOP:
+ case PHY_FUNC_LINK_RESET:
+ case PHY_FUNC_HARD_RESET:
+ case PHY_FUNC_DISABLE:
+ case PHY_FUNC_CLEAR_ERROR_LOG:
+ case PHY_FUNC_CLEAR_AFFIL:
+ case PHY_FUNC_TX_SATA_PS_SIGNAL:
+ break;
+
+ default:
+ resp_data[2] = SMP_RESP_PHY_UNK_OP;
+ return;
+ }
+
+ rates.minimum_linkrate = min;
+ rates.maximum_linkrate = max;
+
+ if (i->dft->lldd_control_phy(sas_ha->sas_phy[phy_id], phy_op, &rates))
+ resp_data[2] = SMP_RESP_FUNC_FAILED;
+ else
+ resp_data[2] = SMP_RESP_FUNC_ACC;
+}
+
+int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req,
+ struct request *rsp)
+{
+ u8 *req_data = NULL, *resp_data = NULL, *buf;
+ struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
+ int error = -EINVAL, resp_data_len = rsp->data_len;
+
+ /* eight is the minimum size for request and response frames */
+ if (req->data_len < 8 || rsp->data_len < 8)
+ goto out;
+
+ if (bio_offset(req->bio) + req->data_len > PAGE_SIZE ||
+ bio_offset(rsp->bio) + rsp->data_len > PAGE_SIZE) {
+ shost_printk(KERN_ERR, shost,
+ "SMP request/response frame crosses page boundary");
+ goto out;
+ }
+
+ req_data = kzalloc(req->data_len, GFP_KERNEL);
+
+ /* make sure frame can always be built ... we copy
+ * back only the requested length */
+ resp_data = kzalloc(max(rsp->data_len, 128U), GFP_KERNEL);
+
+ if (!req_data || !resp_data) {
+ error = -ENOMEM;
+ goto out;
+ }
+
+ local_irq_disable();
+ buf = kmap_atomic(bio_page(req->bio), KM_USER0) + bio_offset(req->bio);
+ memcpy(req_data, buf, req->data_len);
+ kunmap_atomic(buf - bio_offset(req->bio), KM_USER0);
+ local_irq_enable();
+
+ if (req_data[0] != SMP_REQUEST)
+ goto out;
+
+ /* always succeeds ... even if we can't process the request
+ * the result is in the response frame */
+ error = 0;
+
+ /* set up default don't know response */
+ resp_data[0] = SMP_RESPONSE;
+ resp_data[1] = req_data[1];
+ resp_data[2] = SMP_RESP_FUNC_UNK;
+
+ switch (req_data[1]) {
+ case SMP_REPORT_GENERAL:
+ req->data_len -= 8;
+ resp_data_len -= 32;
+ resp_data[2] = SMP_RESP_FUNC_ACC;
+ resp_data[9] = sas_ha->num_phys;
+ break;
+
+ case SMP_REPORT_MANUF_INFO:
+ req->data_len -= 8;
+ resp_data_len -= 64;
+ resp_data[2] = SMP_RESP_FUNC_ACC;
+ memcpy(resp_data + 12, shost->hostt->name,
+ SAS_EXPANDER_VENDOR_ID_LEN);
+ memcpy(resp_data + 20, "libsas virt phy",
+ SAS_EXPANDER_PRODUCT_ID_LEN);
+ break;
+
+ case SMP_READ_GPIO_REG:
+ /* FIXME: need GPIO support in the transport class */
+ break;
+
+ case SMP_DISCOVER:
+ req->data_len =- 16;
+ if (req->data_len < 0) {
+ req->data_len = 0;
+ error = -EINVAL;
+ goto out;
+ }
+ resp_data_len -= 56;
+ sas_host_smp_discover(sas_ha, resp_data, req_data[9]);
+ break;
+
+ case SMP_REPORT_PHY_ERR_LOG:
+ /* FIXME: could implement this with additional
+ * libsas callbacks providing the HW supports it */
+ break;
+
+ case SMP_REPORT_PHY_SATA:
+ req->data_len =- 16;
+ if (req->data_len < 0) {
+ req->data_len = 0;
+ error = -EINVAL;
+ goto out;
+ }
+ resp_data_len -= 60;
+ sas_report_phy_sata(sas_ha, resp_data, req_data[9]);
+ break;
+
+ case SMP_REPORT_ROUTE_INFO:
+ /* Can't implement; hosts have no routes */
+ break;
+
+ case SMP_WRITE_GPIO_REG:
+ /* FIXME: need GPIO support in the transport class */
+ break;
+
+ case SMP_CONF_ROUTE_INFO:
+ /* Can't implement; hosts have no routes */
+ break;
+
+ case SMP_PHY_CONTROL:
+ req->data_len =- 44;
+ if (req->data_len < 0) {
+ req->data_len = 0;
+ error = -EINVAL;
+ goto out;
+ }
+ resp_data_len -= 8;
+ sas_phy_control(sas_ha, req_data[9], req_data[10],
+ req_data[32] >> 4, req_data[33] >> 4,
+ resp_data);
+ break;
+
+ case SMP_PHY_TEST_FUNCTION:
+ /* FIXME: should this be implemented? */
+ break;
+
+ default:
+ /* probably a 2.0 function */
+ break;
+ }
+
+ local_irq_disable();
+ buf = kmap_atomic(bio_page(rsp->bio), KM_USER0) + bio_offset(rsp->bio);
+ memcpy(buf, resp_data, rsp->data_len);
+ flush_kernel_dcache_page(bio_page(rsp->bio));
+ kunmap_atomic(buf - bio_offset(rsp->bio), KM_USER0);
+ local_irq_enable();
+ rsp->data_len = resp_data_len;
+
+ out:
+ kfree(req_data);
+ kfree(resp_data);
+ return error;
+}
diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h
index baa0666ffa80..b4f9368f116a 100644
--- a/drivers/scsi/libsas/sas_internal.h
+++ b/drivers/scsi/libsas/sas_internal.h
@@ -80,6 +80,20 @@ struct domain_device *sas_find_dev_by_rphy(struct sas_rphy *rphy);
void sas_hae_reset(struct work_struct *work);
+#ifdef CONFIG_SCSI_SAS_HOST_SMP
+extern int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req,
+ struct request *rsp);
+#else
+static inline int sas_smp_host_handler(struct Scsi_Host *shost,
+ struct request *req,
+ struct request *rsp)
+{
+ shost_printk(KERN_ERR, shost,
+ "Cannot send SMP to a sas host (not enabled in CONFIG)\n");
+ return -EINVAL;
+}
+#endif
+
static inline void sas_queue_event(int event, spinlock_t *lock,
unsigned long *pending,
struct work_struct *work,
diff --git a/include/scsi/scsi_transport_sas.h b/include/scsi/scsi_transport_sas.h
index 007d92904207..09125fa95b93 100644
--- a/include/scsi/scsi_transport_sas.h
+++ b/include/scsi/scsi_transport_sas.h
@@ -11,10 +11,10 @@ struct sas_rphy;
struct request;
enum sas_device_type {
- SAS_PHY_UNUSED,
- SAS_END_DEVICE,
- SAS_EDGE_EXPANDER_DEVICE,
- SAS_FANOUT_EXPANDER_DEVICE,
+ SAS_PHY_UNUSED = 0,
+ SAS_END_DEVICE = 1,
+ SAS_EDGE_EXPANDER_DEVICE = 2,
+ SAS_FANOUT_EXPANDER_DEVICE = 3,
};
static inline int sas_protocol_ata(enum sas_protocol proto)