summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2008-05-09 10:34:00 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2008-05-09 10:34:00 -0700
commit3ed43c745d2ce0c4ca15ad406285d1cc7e8ceec3 (patch)
tree286decf836edc60ef70a0306a785ed497f7fed73
parent26c5e98e88a6126adef2ddce21899e5afe823a2b (diff)
parent45828b812ddb608ddf83eff11601f62b726d13ab (diff)
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (21 commits) Blackfin Serial Driver: abstract away DLAB differences into header Blackfin Serial Driver: macro away the IER differences between processors [Blackfin] arch: remove useless IRQ_SW_INT defines [Blackfin] arch: protect linux/usb/musb.h include until the driver gets mainlined [Blackfin] arch: protect linux/usb/isp1362.h include until the driver gets mainlined [Blackfin] arch: add EBIU supporting for BF54x EZKIT SMSC LAN911x/LAN921x families embedded ethernet driver [Blackfin] arch: Set spi flash partition on bf527 as like bf548. [Blackfin] arch: fix bug - Remove module will not free L1 memory used [Blackfin] arch: fix wrong header name in comment [Blackfin] arch: Fix BUG - spi flash on bf527 ezkit would fail at mount [Blackfin] arch: add twi_lcd and twi_keypad i2c board info to bf527-ezkit [Blackfin] arch: Add physmap partition for BF527-EZkit [Blackfin] arch: fix gdb testing regression [Blackfin] arch: disable single stepping when delivering a signal [Blackfin] arch: Delete unused (copied from m68k) entries in asm-offsets.c. [Blackfin] arch: In the double fault handler, set up the PT_RETI slot [Blackfin] arch: Support for CPU_FREQ and NOHZ [Blackfin] arch: Functional power management support: Add CPU and platform voltage scaling support [Blackfin] arch: fix bug - breaking the atomic sections code. [Blackfin] arch: Equalize include files: Add VR_CTL masks ...
-rw-r--r--arch/blackfin/Kconfig18
-rw-r--r--arch/blackfin/kernel/asm-offsets.c3
-rw-r--r--arch/blackfin/kernel/fixed_code.S2
-rw-r--r--arch/blackfin/kernel/module.c37
-rw-r--r--arch/blackfin/kernel/process.c2
-rw-r--r--arch/blackfin/kernel/ptrace.c4
-rw-r--r--arch/blackfin/kernel/signal.c13
-rw-r--r--arch/blackfin/kernel/time-ts.c10
-rw-r--r--arch/blackfin/mach-bf527/boards/ezkit.c104
-rw-r--r--arch/blackfin/mach-bf533/boards/cm_bf533.c33
-rw-r--r--arch/blackfin/mach-bf533/boards/ezkit.c31
-rw-r--r--arch/blackfin/mach-bf533/boards/stamp.c31
-rw-r--r--arch/blackfin/mach-bf537/boards/cm_bf537.c33
-rw-r--r--arch/blackfin/mach-bf537/boards/stamp.c31
-rw-r--r--arch/blackfin/mach-bf548/boards/cm_bf548.c34
-rw-r--r--arch/blackfin/mach-bf548/boards/ezkit.c32
-rw-r--r--arch/blackfin/mach-bf561/boards/cm_bf561.c32
-rw-r--r--arch/blackfin/mach-bf561/boards/ezkit.c31
-rw-r--r--arch/blackfin/mach-common/Makefile5
-rw-r--r--arch/blackfin/mach-common/cpufreq.c26
-rw-r--r--arch/blackfin/mach-common/dpmc.c137
-rw-r--r--arch/blackfin/mach-common/dpmc_modes.S (renamed from arch/blackfin/mach-common/dpmc.S)27
-rw-r--r--arch/blackfin/mach-common/entry.S113
-rw-r--r--drivers/serial/bfin_5xx.c98
-rw-r--r--include/asm-blackfin/dpmc.h10
-rw-r--r--include/asm-blackfin/entry.h5
-rw-r--r--include/asm-blackfin/mach-bf527/bfin_serial_5xx.h5
-rw-r--r--include/asm-blackfin/mach-bf533/bfin_serial_5xx.h5
-rw-r--r--include/asm-blackfin/mach-bf533/defBF532.h2
-rw-r--r--include/asm-blackfin/mach-bf533/irq.h14
-rw-r--r--include/asm-blackfin/mach-bf537/bfin_serial_5xx.h5
-rw-r--r--include/asm-blackfin/mach-bf537/irq.h35
-rw-r--r--include/asm-blackfin/mach-bf548/bfin_serial_5xx.h3
-rw-r--r--include/asm-blackfin/mach-bf548/defBF54x_base.h20
-rw-r--r--include/asm-blackfin/mach-bf561/bfin_serial_5xx.h5
-rw-r--r--include/asm-blackfin/mach-bf561/defBF561.h28
-rw-r--r--include/asm-blackfin/mach-bf561/irq.h13
-rw-r--r--include/asm-blackfin/mach-common/context.S5
-rw-r--r--include/asm-blackfin/time.h4
39 files changed, 817 insertions, 229 deletions
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 795d0ac67c21..fd5708523f2e 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -832,6 +832,7 @@ config BANK_0
config BANK_1
hex "Bank 1"
default 0x7BB0
+ default 0x5558 if BF54x
config BANK_2
hex "Bank 2"
@@ -963,21 +964,22 @@ endchoice
endmenu
-if (BF537 || BF533 || BF54x)
-
menu "CPU Frequency scaling"
source "drivers/cpufreq/Kconfig"
-config CPU_FREQ
- bool
+config CPU_VOLTAGE
+ bool "CPU Voltage scaling"
+ depends on EXPERIMENTAL
+ depends on CPU_FREQ
default n
help
- If you want to enable this option, you should select the
- DPMC driver from Character Devices.
-endmenu
+ Say Y here if you want CPU voltage scaling according to the CPU frequency.
+ This option violates the PLL BYPASS recommendation in the Blackfin Processor
+ manuals. There is a theoretical risk that during VDDINT transitions
+ the PLL may unlock.
-endif
+endmenu
source "net/Kconfig"
diff --git a/arch/blackfin/kernel/asm-offsets.c b/arch/blackfin/kernel/asm-offsets.c
index 721f15f3cebf..881afe9082c7 100644
--- a/arch/blackfin/kernel/asm-offsets.c
+++ b/arch/blackfin/kernel/asm-offsets.c
@@ -56,9 +56,6 @@ int main(void)
/* offsets into the thread struct */
DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp));
DEFINE(THREAD_USP, offsetof(struct thread_struct, usp));
- DEFINE(THREAD_SR, offsetof(struct thread_struct, seqstat));
- DEFINE(PT_SR, offsetof(struct thread_struct, seqstat));
- DEFINE(THREAD_ESP0, offsetof(struct thread_struct, esp0));
DEFINE(THREAD_PC, offsetof(struct thread_struct, pc));
DEFINE(KERNEL_STACK_SIZE, THREAD_SIZE);
diff --git a/arch/blackfin/kernel/fixed_code.S b/arch/blackfin/kernel/fixed_code.S
index 5ed47228a390..4b03ba025488 100644
--- a/arch/blackfin/kernel/fixed_code.S
+++ b/arch/blackfin/kernel/fixed_code.S
@@ -1,6 +1,6 @@
/*
* This file contains sequences of code that will be copied to a
- * fixed location, defined in <asm/atomic_seq.h>. The interrupt
+ * fixed location, defined in <asm/fixed_code.h>. The interrupt
* handlers ensure that these sequences appear to be atomic when
* executed from userspace.
* These are aligned to 16 bytes, so that we have some space to replace
diff --git a/arch/blackfin/kernel/module.c b/arch/blackfin/kernel/module.c
index 8b9fe29d03f4..14a42848f37f 100644
--- a/arch/blackfin/kernel/module.c
+++ b/arch/blackfin/kernel/module.c
@@ -160,6 +160,13 @@ int
module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
char *secstrings, struct module *mod)
{
+ /*
+ * XXX: sechdrs are vmalloced in kernel/module.c
+ * and would be vfreed just after module is loaded,
+ * so we hack to keep the only information we needed
+ * in mod->arch to correctly free L1 I/D sram later.
+ * NOTE: this breaks the semantic of mod->arch structure.
+ */
Elf_Shdr *s, *sechdrs_end = sechdrs + hdr->e_shnum;
void *dest = NULL;
@@ -167,8 +174,8 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
if ((strcmp(".l1.text", secstrings + s->sh_name) == 0) ||
((strcmp(".text", secstrings + s->sh_name) == 0) &&
(hdr->e_flags & FLG_CODE_IN_L1) && (s->sh_size > 0))) {
- mod->arch.text_l1 = s;
dest = l1_inst_sram_alloc(s->sh_size);
+ mod->arch.text_l1 = dest;
if (dest == NULL) {
printk(KERN_ERR
"module %s: L1 instruction memory allocation failed\n",
@@ -182,8 +189,8 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
if ((strcmp(".l1.data", secstrings + s->sh_name) == 0) ||
((strcmp(".data", secstrings + s->sh_name) == 0) &&
(hdr->e_flags & FLG_DATA_IN_L1) && (s->sh_size > 0))) {
- mod->arch.data_a_l1 = s;
dest = l1_data_sram_alloc(s->sh_size);
+ mod->arch.data_a_l1 = dest;
if (dest == NULL) {
printk(KERN_ERR
"module %s: L1 data memory allocation failed\n",
@@ -197,8 +204,8 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
if (strcmp(".l1.bss", secstrings + s->sh_name) == 0 ||
((strcmp(".bss", secstrings + s->sh_name) == 0) &&
(hdr->e_flags & FLG_DATA_IN_L1) && (s->sh_size > 0))) {
- mod->arch.bss_a_l1 = s;
dest = l1_data_sram_alloc(s->sh_size);
+ mod->arch.bss_a_l1 = dest;
if (dest == NULL) {
printk(KERN_ERR
"module %s: L1 data memory allocation failed\n",
@@ -210,8 +217,8 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
s->sh_addr = (unsigned long)dest;
}
if (strcmp(".l1.data.B", secstrings + s->sh_name) == 0) {
- mod->arch.data_b_l1 = s;
dest = l1_data_B_sram_alloc(s->sh_size);
+ mod->arch.data_b_l1 = dest;
if (dest == NULL) {
printk(KERN_ERR
"module %s: L1 data memory allocation failed\n",
@@ -223,8 +230,8 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
s->sh_addr = (unsigned long)dest;
}
if (strcmp(".l1.bss.B", secstrings + s->sh_name) == 0) {
- mod->arch.bss_b_l1 = s;
dest = l1_data_B_sram_alloc(s->sh_size);
+ mod->arch.bss_b_l1 = dest;
if (dest == NULL) {
printk(KERN_ERR
"module %s: L1 data memory allocation failed\n",
@@ -416,14 +423,14 @@ module_finalize(const Elf_Ehdr * hdr,
void module_arch_cleanup(struct module *mod)
{
- if ((mod->arch.text_l1) && (mod->arch.text_l1->sh_addr))
- l1_inst_sram_free((void *)mod->arch.text_l1->sh_addr);
- if ((mod->arch.data_a_l1) && (mod->arch.data_a_l1->sh_addr))
- l1_data_sram_free((void *)mod->arch.data_a_l1->sh_addr);
- if ((mod->arch.bss_a_l1) && (mod->arch.bss_a_l1->sh_addr))
- l1_data_sram_free((void *)mod->arch.bss_a_l1->sh_addr);
- if ((mod->arch.data_b_l1) && (mod->arch.data_b_l1->sh_addr))
- l1_data_B_sram_free((void *)mod->arch.data_b_l1->sh_addr);
- if ((mod->arch.bss_b_l1) && (mod->arch.bss_b_l1->sh_addr))
- l1_data_B_sram_free((void *)mod->arch.bss_b_l1->sh_addr);
+ if (mod->arch.text_l1)
+ l1_inst_sram_free((void *)mod->arch.text_l1);
+ if (mod->arch.data_a_l1)
+ l1_data_sram_free((void *)mod->arch.data_a_l1);
+ if (mod->arch.bss_a_l1)
+ l1_data_sram_free((void *)mod->arch.bss_a_l1);
+ if (mod->arch.data_b_l1)
+ l1_data_B_sram_free((void *)mod->arch.data_b_l1);
+ if (mod->arch.bss_b_l1)
+ l1_data_B_sram_free((void *)mod->arch.bss_b_l1);
}
diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
index be9fdd00d7cb..53c2cd255441 100644
--- a/arch/blackfin/kernel/process.c
+++ b/arch/blackfin/kernel/process.c
@@ -245,7 +245,7 @@ unsigned long get_wchan(struct task_struct *p)
void finish_atomic_sections (struct pt_regs *regs)
{
- int __user *up0 = (int __user *)&regs->p0;
+ int __user *up0 = (int __user *)regs->p0;
if (regs->pc < ATOMIC_SEQS_START || regs->pc >= ATOMIC_SEQS_END)
return;
diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c
index b4f062c172c6..f51ab088098e 100644
--- a/arch/blackfin/kernel/ptrace.c
+++ b/arch/blackfin/kernel/ptrace.c
@@ -185,8 +185,8 @@ void ptrace_disable(struct task_struct *child)
{
unsigned long tmp;
/* make sure the single step bit is not set. */
- tmp = get_reg(child, PT_SR) & ~(TRACE_BITS << 16);
- put_reg(child, PT_SR, tmp);
+ tmp = get_reg(child, PT_SYSCFG) & ~TRACE_BITS;
+ put_reg(child, PT_SYSCFG, tmp);
}
long arch_ptrace(struct task_struct *child, long request, long addr, long data)
diff --git a/arch/blackfin/kernel/signal.c b/arch/blackfin/kernel/signal.c
index cb9d883d493c..dbc3bbf846be 100644
--- a/arch/blackfin/kernel/signal.c
+++ b/arch/blackfin/kernel/signal.c
@@ -42,6 +42,9 @@
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
+/* Location of the trace bit in SYSCFG. */
+#define TRACE_BITS 0x0001
+
struct fdpic_func_descriptor {
unsigned long text;
unsigned long GOT;
@@ -225,6 +228,16 @@ setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t * info,
regs->r1 = (unsigned long)(&frame->info);
regs->r2 = (unsigned long)(&frame->uc);
+ /*
+ * Clear the trace flag when entering the signal handler, but
+ * notify any tracer that was single-stepping it. The tracer
+ * may want to single-step inside the handler too.
+ */
+ if (regs->syscfg & TRACE_BITS) {
+ regs->syscfg &= ~TRACE_BITS;
+ ptrace_notify(SIGTRAP);
+ }
+
return 0;
give_sigsegv:
diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c
index 4482c47c09e5..e887efc86c29 100644
--- a/arch/blackfin/kernel/time-ts.c
+++ b/arch/blackfin/kernel/time-ts.c
@@ -60,7 +60,7 @@ static inline unsigned long long cycles_2_ns(cycle_t cyc)
static cycle_t read_cycles(void)
{
- return get_cycles();
+ return __bfin_cycles_off + (get_cycles() << __bfin_cycles_mod);
}
unsigned long long sched_clock(void)
@@ -117,7 +117,7 @@ static void bfin_timer_set_mode(enum clock_event_mode mode,
break;
}
case CLOCK_EVT_MODE_ONESHOT:
- bfin_write_TSCALE(0);
+ bfin_write_TSCALE(TIME_SCALE - 1);
bfin_write_TCOUNT(0);
bfin_write_TCNTL(TMPWR | TMREN);
CSYNC();
@@ -183,10 +183,14 @@ irqreturn_t timer_interrupt(int irq, void *dev_id)
static int __init bfin_clockevent_init(void)
{
+ unsigned long timer_clk;
+
+ timer_clk = get_cclk() / TIME_SCALE;
+
setup_irq(IRQ_CORETMR, &bfin_timer_irq);
bfin_timer_init();
- clockevent_bfin.mult = div_sc(get_cclk(), NSEC_PER_SEC, clockevent_bfin.shift);
+ clockevent_bfin.mult = div_sc(timer_clk, NSEC_PER_SEC, clockevent_bfin.shift);
clockevent_bfin.max_delta_ns = clockevent_delta2ns(-1, &clockevent_bfin);
clockevent_bfin.min_delta_ns = clockevent_delta2ns(100, &clockevent_bfin);
clockevents_register_device(&clockevent_bfin);
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 583d53811f03..8aa49f804228 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -32,12 +32,14 @@
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/usb/isp1362.h>
#endif
#include <linux/ata_platform.h>
+#include <linux/i2c.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/usb/sl811.h>
@@ -50,6 +52,7 @@
#include <asm/reboot.h>
#include <asm/nand.h>
#include <asm/portmux.h>
+#include <asm/dpmc.h>
#include <linux/spi/ad7877.h>
/*
@@ -171,6 +174,46 @@ static struct platform_device bf52x_t350mcqb_device = {
};
#endif
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition ezkit_partitions[] = {
+ {
+ .name = "Bootloader",
+ .size = 0x40000,
+ .offset = 0,
+ }, {
+ .name = "Kernel",
+ .size = 0x1C0000,
+ .offset = MTDPART_OFS_APPEND,
+ }, {
+ .name = "RootFS",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND,
+ }
+};
+
+static struct physmap_flash_data ezkit_flash_data = {
+ .width = 2,
+ .parts = ezkit_partitions,
+ .nr_parts = ARRAY_SIZE(ezkit_partitions),
+};
+
+static struct resource ezkit_flash_resource = {
+ .start = 0x20000000,
+ .end = 0x203fffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ezkit_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &ezkit_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &ezkit_flash_resource,
+};
+#endif
+
#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
static struct mtd_partition partition_info[] = {
{
@@ -420,11 +463,7 @@ static struct mtd_partition bfin_spi_flash_partitions[] = {
.offset = 0,
.mask_flags = MTD_CAP_ROM
}, {
- .name = "kernel",
- .size = 0xe0000,
- .offset = MTDPART_OFS_APPEND,
- }, {
- .name = "file system",
+ .name = "linux kernel",
.size = MTDPART_SIZ_FULL,
.offset = MTDPART_OFS_APPEND,
}
@@ -434,7 +473,7 @@ static struct flash_platform_data bfin_spi_flash_data = {
.name = "m25p80",
.parts = bfin_spi_flash_partitions,
.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
- .type = "m25p64",
+ .type = "m25p16",
};
/* SPI flash chip (m25p64) */
@@ -755,6 +794,24 @@ static struct platform_device i2c_bfin_twi_device = {
};
#endif
+#ifdef CONFIG_I2C_BOARDINFO
+static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+ {
+ I2C_BOARD_INFO("pcf8574_lcd", 0x22),
+ .type = "pcf8574_lcd",
+ },
+#endif
+#if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE)
+ {
+ I2C_BOARD_INFO("pcf8574_keypad", 0x27),
+ .type = "pcf8574_keypad",
+ .irq = IRQ_PF8,
+ },
+#endif
+};
+#endif
+
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
static struct platform_device bfin_sport0_uart_device = {
.name = "bfin-sport-uart",
@@ -839,7 +896,32 @@ static struct platform_device bfin_gpios_device = {
.resource = &bfin_gpios_resources,
};
+static const unsigned int cclk_vlev_datasheet[] =
+{
+ VRPAIR(VLEV_100, 400000000),
+ VRPAIR(VLEV_105, 426000000),
+ VRPAIR(VLEV_110, 500000000),
+ VRPAIR(VLEV_115, 533000000),
+ VRPAIR(VLEV_120, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+ .tuple_tab = cclk_vlev_datasheet,
+ .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+ .vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+ .name = "bfin dpmc",
+ .dev = {
+ .platform_data = &bfin_dmpc_vreg_data,
+ },
+};
+
static struct platform_device *stamp_devices[] __initdata = {
+
+ &bfin_dpmc,
+
#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
&bf5xx_nand_device,
#endif
@@ -921,12 +1003,22 @@ static struct platform_device *stamp_devices[] __initdata = {
&bfin_device_gpiokeys,
#endif
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+ &ezkit_flash_device,
+#endif
+
&bfin_gpios_device,
};
static int __init stamp_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
+
+#ifdef CONFIG_I2C_BOARDINFO
+ i2c_register_board_info(0, bfin_i2c_board_info,
+ ARRAY_SIZE(bfin_i2c_board_info));
+#endif
+
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
spi_register_board_info(bfin_spi_board_info,
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index a03149c72681..ed2b0b8f5dc9 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -33,12 +33,15 @@
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/usb/isp1362.h>
+#endif
#include <linux/ata_platform.h>
#include <linux/irq.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/portmux.h>
+#include <asm/dpmc.h>
/*
* Name the Board for the /proc/cpuinfo
@@ -341,7 +344,37 @@ static struct platform_device bfin_pata_device = {
};
#endif
+static const unsigned int cclk_vlev_datasheet[] =
+{
+ VRPAIR(VLEV_085, 250000000),
+ VRPAIR(VLEV_090, 376000000),
+ VRPAIR(VLEV_095, 426000000),
+ VRPAIR(VLEV_100, 426000000),
+ VRPAIR(VLEV_105, 476000000),
+ VRPAIR(VLEV_110, 476000000),
+ VRPAIR(VLEV_115, 476000000),
+ VRPAIR(VLEV_120, 600000000),
+ VRPAIR(VLEV_125, 600000000),
+ VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+ .tuple_tab = cclk_vlev_datasheet,
+ .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+ .vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+ .name = "bfin dpmc",
+ .dev = {
+ .platform_data = &bfin_dmpc_vreg_data,
+ },
+};
+
static struct platform_device *cm_bf533_devices[] __initdata = {
+
+ &bfin_dpmc,
+
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
&bfin_uart_device,
#endif
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index 08a7943949ae..9d28415163ea 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -42,6 +42,7 @@
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/portmux.h>
+#include <asm/dpmc.h>
/*
* Name the Board for the /proc/cpuinfo
@@ -350,7 +351,37 @@ static struct platform_device i2c_gpio_device = {
};
#endif
+static const unsigned int cclk_vlev_datasheet[] =
+{
+ VRPAIR(VLEV_085, 250000000),
+ VRPAIR(VLEV_090, 376000000),
+ VRPAIR(VLEV_095, 426000000),
+ VRPAIR(VLEV_100, 426000000),
+ VRPAIR(VLEV_105, 476000000),
+ VRPAIR(VLEV_110, 476000000),
+ VRPAIR(VLEV_115, 476000000),
+ VRPAIR(VLEV_120, 600000000),
+ VRPAIR(VLEV_125, 600000000),
+ VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+ .tuple_tab = cclk_vlev_datasheet,
+ .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+ .vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+ .name = "bfin dpmc",
+ .dev = {
+ .platform_data = &bfin_dmpc_vreg_data,
+ },
+};
+
static struct platform_device *ezkit_devices[] __initdata = {
+
+ &bfin_dpmc,
+
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
&smc91x_device,
#endif
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index 024f418ae543..7fd35fb32fd5 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -45,6 +45,7 @@
#include <asm/bfin5xx_spi.h>
#include <asm/reboot.h>
#include <asm/portmux.h>
+#include <asm/dpmc.h>
/*
* Name the Board for the /proc/cpuinfo
@@ -516,7 +517,37 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
};
#endif
+static const unsigned int cclk_vlev_datasheet[] =
+{
+ VRPAIR(VLEV_085, 250000000),
+ VRPAIR(VLEV_090, 376000000),
+ VRPAIR(VLEV_095, 426000000),
+ VRPAIR(VLEV_100, 426000000),
+ VRPAIR(VLEV_105, 476000000),
+ VRPAIR(VLEV_110, 476000000),
+ VRPAIR(VLEV_115, 476000000),
+ VRPAIR(VLEV_120, 600000000),
+ VRPAIR(VLEV_125, 600000000),
+ VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+ .tuple_tab = cclk_vlev_datasheet,
+ .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+ .vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+ .name = "bfin dpmc",
+ .dev = {
+ .platform_data = &bfin_dmpc_vreg_data,
+ },
+};
+
static struct platform_device *stamp_devices[] __initdata = {
+
+ &bfin_dpmc,
+
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
&rtc_device,
#endif
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c
index d8a23cd9b9ed..73f2142875e2 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c
@@ -35,12 +35,15 @@
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/usb/isp1362.h>
+#endif
#include <linux/ata_platform.h>
#include <linux/irq.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/portmux.h>
+#include <asm/dpmc.h>
/*
* Name the Board for the /proc/cpuinfo
@@ -428,7 +431,37 @@ static struct platform_device bfin_pata_device = {
};
#endif
+static const unsigned int cclk_vlev_datasheet[] =
+{
+ VRPAIR(VLEV_085, 250000000),
+ VRPAIR(VLEV_090, 376000000),
+ VRPAIR(VLEV_095, 426000000),
+ VRPAIR(VLEV_100, 426000000),
+ VRPAIR(VLEV_105, 476000000),
+ VRPAIR(VLEV_110, 476000000),
+ VRPAIR(VLEV_115, 476000000),
+ VRPAIR(VLEV_120, 500000000),
+ VRPAIR(VLEV_125, 533000000),
+ VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+ .tuple_tab = cclk_vlev_datasheet,
+ .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+ .vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+ .name = "bfin dpmc",
+ .dev = {
+ .platform_data = &bfin_dmpc_vreg_data,
+ },
+};
+
static struct platform_device *cm_bf537_devices[] __initdata = {
+
+ &bfin_dpmc,
+
#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
&hitachi_fb_device,
#endif
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index d3727b7c2d7d..9a756d1f3d73 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -47,6 +47,7 @@
#include <asm/bfin5xx_spi.h>
#include <asm/reboot.h>
#include <asm/portmux.h>
+#include <asm/dpmc.h>
#include <linux/spi/ad7877.h>
/*
@@ -817,7 +818,37 @@ static struct platform_device bfin_pata_device = {
};
#endif
+static const unsigned int cclk_vlev_datasheet[] =
+{
+ VRPAIR(VLEV_085, 250000000),
+ VRPAIR(VLEV_090, 376000000),
+ VRPAIR(VLEV_095, 426000000),
+ VRPAIR(VLEV_100, 426000000),
+ VRPAIR(VLEV_105, 476000000),
+ VRPAIR(VLEV_110, 476000000),
+ VRPAIR(VLEV_115, 476000000),
+ VRPAIR(VLEV_120, 500000000),
+ VRPAIR(VLEV_125, 533000000),
+ VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+ .tuple_tab = cclk_vlev_datasheet,
+ .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+ .vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+ .name = "bfin dpmc",
+ .dev = {
+ .platform_data = &bfin_dmpc_vreg_data,
+ },
+};
+
static struct platform_device *stamp_devices[] __initdata = {
+
+ &bfin_dpmc,
+
#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
&bfin_pcmcia_cf_device,
#endif
diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c
index e3e8479fffb5..3b74f96d3590 100644
--- a/arch/blackfin/mach-bf548/boards/cm_bf548.c
+++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c
@@ -36,7 +36,9 @@
#include <linux/spi/flash.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
+#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
#include <linux/usb/musb.h>
+#endif
#include <asm/bfin5xx_spi.h>
#include <asm/cplb.h>
#include <asm/dma.h>
@@ -44,6 +46,7 @@
#include <asm/nand.h>
#include <asm/portmux.h>
#include <asm/mach/bf54x_keys.h>
+#include <asm/dpmc.h>
#include <linux/input.h>
#include <linux/spi/ad7877.h>
@@ -590,7 +593,38 @@ static struct platform_device bfin_device_gpiokeys = {
};
#endif
+static const unsigned int cclk_vlev_datasheet[] =
+{
+/*
+ * Internal VLEV BF54XSBBC1533
+ ****temporarily using these values until data sheet is updated
+ */
+ VRPAIR(VLEV_085, 150000000),
+ VRPAIR(VLEV_090, 250000000),
+ VRPAIR(VLEV_110, 276000000),
+ VRPAIR(VLEV_115, 301000000),
+ VRPAIR(VLEV_120, 525000000),
+ VRPAIR(VLEV_125, 550000000),
+ VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+ .tuple_tab = cclk_vlev_datasheet,
+ .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+ .vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+ .name = "bfin dpmc",
+ .dev = {
+ .platform_data = &bfin_dmpc_vreg_data,
+ },
+};
+
static struct platform_device *cm_bf548_devices[] __initdata = {
+
+ &bfin_dpmc,
+
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
&rtc_device,
#endif
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index b00f68ac6bc9..d1682bb37509 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -46,6 +46,7 @@
#include <asm/dma.h>
#include <asm/gpio.h>
#include <asm/nand.h>
+#include <asm/dpmc.h>
#include <asm/portmux.h>
#include <asm/mach/bf54x_keys.h>
#include <linux/input.h>
@@ -689,7 +690,38 @@ static struct platform_device bfin_gpios_device = {
.resource = &bfin_gpios_resources,
};
+static const unsigned int cclk_vlev_datasheet[] =
+{
+/*
+ * Internal VLEV BF54XSBBC1533
+ ****temporarily using these values until data sheet is updated
+ */
+ VRPAIR(VLEV_085, 150000000),
+ VRPAIR(VLEV_090, 250000000),
+ VRPAIR(VLEV_110, 276000000),
+ VRPAIR(VLEV_115, 301000000),
+ VRPAIR(VLEV_120, 525000000),
+ VRPAIR(VLEV_125, 550000000),
+ VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+ .tuple_tab = cclk_vlev_datasheet,
+ .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+ .vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+ .name = "bfin dpmc",
+ .dev = {
+ .platform_data = &bfin_dmpc_vreg_data,
+ },
+};
+
static struct platform_device *ezkit_devices[] __initdata = {
+
+ &bfin_dpmc,
+
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
&rtc_device,
#endif
diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
index 9fd580952fd8..466ef5929a25 100644
--- a/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -33,12 +33,15 @@
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/usb/isp1362.h>
+#endif
#include <linux/ata_platform.h>
#include <linux/irq.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/portmux.h>
+#include <asm/dpmc.h>
/*
* Name the Board for the /proc/cpuinfo
@@ -339,8 +342,37 @@ static struct platform_device bfin_pata_device = {
};
#endif
+static const unsigned int cclk_vlev_datasheet[] =
+{
+ VRPAIR(VLEV_085, 250000000),
+ VRPAIR(VLEV_090, 300000000),
+ VRPAIR(VLEV_095, 313000000),
+ VRPAIR(VLEV_100, 350000000),
+ VRPAIR(VLEV_105, 400000000),
+ VRPAIR(VLEV_110, 444000000),
+ VRPAIR(VLEV_115, 450000000),
+ VRPAIR(VLEV_120, 475000000),
+ VRPAIR(VLEV_125, 500000000),
+ VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+ .tuple_tab = cclk_vlev_datasheet,
+ .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+ .vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+ .name = "bfin dpmc",
+ .dev = {
+ .platform_data = &bfin_dmpc_vreg_data,
+ },
+};
+
static struct platform_device *cm_bf561_devices[] __initdata = {
+ &bfin_dpmc,
+
#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
&hitachi_fb_device,
#endif
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index 0d74b7d99209..61d8f7648b24 100644
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -39,6 +39,7 @@
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/portmux.h>
+#include <asm/dpmc.h>
/*
* Name the Board for the /proc/cpuinfo
@@ -443,7 +444,37 @@ static struct platform_device i2c_gpio_device = {
};
#endif
+static const unsigned int cclk_vlev_datasheet[] =
+{
+ VRPAIR(VLEV_085, 250000000),
+ VRPAIR(VLEV_090, 300000000),
+ VRPAIR(VLEV_095, 313000000),
+ VRPAIR(VLEV_100, 350000000),
+ VRPAIR(VLEV_105, 400000000),
+ VRPAIR(VLEV_110, 444000000),
+ VRPAIR(VLEV_115, 450000000),
+ VRPAIR(VLEV_120, 475000000),
+ VRPAIR(VLEV_125, 500000000),
+ VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+ .tuple_tab = cclk_vlev_datasheet,
+ .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+ .vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+ .name = "bfin dpmc",
+ .dev = {
+ .platform_data = &bfin_dmpc_vreg_data,
+ },
+};
+
static struct platform_device *ezkit_devices[] __initdata = {
+
+ &bfin_dpmc,
+
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
&smc91x_device,
#endif
diff --git a/arch/blackfin/mach-common/Makefile b/arch/blackfin/mach-common/Makefile
index 393081e9b680..422bfee34adc 100644
--- a/arch/blackfin/mach-common/Makefile
+++ b/arch/blackfin/mach-common/Makefile
@@ -6,5 +6,6 @@ obj-y := \
cache.o cacheinit.o entry.o \
interrupt.o lock.o irqpanic.o arch_checks.o ints-priority.o
-obj-$(CONFIG_PM) += pm.o dpmc.o
-obj-$(CONFIG_CPU_FREQ) += cpufreq.o
+obj-$(CONFIG_PM) += pm.o dpmc_modes.o
+obj-$(CONFIG_CPU_FREQ) += cpufreq.o
+obj-$(CONFIG_CPU_VOLTAGE) += dpmc.o
diff --git a/arch/blackfin/mach-common/cpufreq.c b/arch/blackfin/mach-common/cpufreq.c
index ed81e00d20e1..75cdad291e88 100644
--- a/arch/blackfin/mach-common/cpufreq.c
+++ b/arch/blackfin/mach-common/cpufreq.c
@@ -62,6 +62,14 @@ static struct bfin_dpm_state {
unsigned int tscale; /* change the divider on the core timer interrupt */
} dpm_state_table[3];
+/*
+ normalized to maximum frequncy offset for CYCLES,
+ used in time-ts cycles clock source, but could be used
+ somewhere also.
+ */
+unsigned long long __bfin_cycles_off;
+unsigned int __bfin_cycles_mod;
+
/**************************************************************************/
static unsigned int bfin_getfreq(unsigned int cpu)
@@ -80,6 +88,7 @@ static int bfin_target(struct cpufreq_policy *policy,
unsigned int index, plldiv, tscale;
unsigned long flags, cclk_hz;
struct cpufreq_freqs freqs;
+ cycles_t cycles;
if (cpufreq_frequency_table_target(policy, bfin_freq_table,
target_freq, relation, &index))
@@ -101,8 +110,14 @@ static int bfin_target(struct cpufreq_policy *policy,
bfin_write_PLL_DIV(plldiv);
/* we have to adjust the core timer, because it is using cclk */
bfin_write_TSCALE(tscale);
+ cycles = get_cycles();
SSYNC();
+ cycles += 10; /* ~10 cycles we loose after get_cycles() */
+ __bfin_cycles_off += (cycles << __bfin_cycles_mod) - (cycles << index);
+ __bfin_cycles_mod = index;
local_irq_restore(flags);
+ /* TODO: just test case for cycles clock source, remove later */
+ pr_debug("cpufreq: done\n");
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
return 0;
@@ -119,22 +134,13 @@ static int __init __bfin_cpu_init(struct cpufreq_policy *policy)
unsigned long cclk, sclk, csel, min_cclk;
int index;
-#ifdef CONFIG_CYCLES_CLOCKSOURCE
-/*
- * Clocksource CYCLES is still CONTINUOUS but not longer MONOTONIC in case we enable
- * CPU frequency scaling, since CYCLES runs off Core Clock.
- */
- printk(KERN_WARNING "CPU frequency scaling not supported: Clocksource not suitable\n"
- return -ENODEV;
-#endif
-
if (policy->cpu != 0)
return -EINVAL;
cclk = get_cclk();
sclk = get_sclk();
-#if ANOMALY_05000273
+#if ANOMALY_05000273 || (!defined(CONFIG_BF54x) && defined(CONFIG_BFIN_DCACHE))
min_cclk = sclk * 2;
#else
min_cclk = sclk;
diff --git a/arch/blackfin/mach-common/dpmc.c b/arch/blackfin/mach-common/dpmc.c
new file mode 100644
index 000000000000..02c7efd1bcf4
--- /dev/null
+++ b/arch/blackfin/mach-common/dpmc.c
@@ -0,0 +1,137 @@
+/*
+ * Copyright 2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/cdev.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/cpufreq.h>
+
+#include <asm/delay.h>
+#include <asm/dpmc.h>
+
+#define DRIVER_NAME "bfin dpmc"
+
+#define dprintk(msg...) \
+ cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, DRIVER_NAME, msg)
+
+struct bfin_dpmc_platform_data *pdata;
+
+/**
+ * bfin_set_vlev - Update VLEV field in VR_CTL Reg.
+ * Avoid BYPASS sequence
+ */
+static void bfin_set_vlev(unsigned int vlev)
+{
+ unsigned pll_lcnt;
+
+ pll_lcnt = bfin_read_PLL_LOCKCNT();
+
+ bfin_write_PLL_LOCKCNT(1);
+ bfin_write_VR_CTL((bfin_read_VR_CTL() & ~VLEV) | vlev);
+ bfin_write_PLL_LOCKCNT(pll_lcnt);
+}
+
+/**
+ * bfin_get_vlev - Get CPU specific VLEV from platform device data
+ */
+static unsigned int bfin_get_vlev(unsigned int freq)
+{
+ int i;
+
+ if (!pdata)
+ goto err_out;
+
+ freq >>= 16;
+
+ for (i = 0; i < pdata->tabsize; i++)
+ if (freq <= (pdata->tuple_tab[i] & 0xFFFF))
+ return pdata->tuple_tab[i] >> 16;
+
+err_out:
+ printk(KERN_WARNING "DPMC: No suitable CCLK VDDINT voltage pair found\n");
+ return VLEV_120;
+}
+
+#ifdef CONFIG_CPU_FREQ
+static int
+vreg_cpufreq_notifier(struct notifier_block *nb, unsigned long val, void *data)
+{
+ struct cpufreq_freqs *freq = data;
+
+ if (val == CPUFREQ_PRECHANGE && freq->old < freq->new) {
+ bfin_set_vlev(bfin_get_vlev(freq->new));
+ udelay(pdata->vr_settling_time); /* Wait until Volatge settled */
+
+ } else if (val == CPUFREQ_POSTCHANGE && freq->old > freq->new)
+ bfin_set_vlev(bfin_get_vlev(freq->new));
+
+ return 0;
+}
+
+static struct notifier_block vreg_cpufreq_notifier_block = {
+ .notifier_call = vreg_cpufreq_notifier
+};
+#endif /* CONFIG_CPU_FREQ */
+
+/**
+ * bfin_dpmc_probe -
+ *
+ */
+static int __devinit bfin_dpmc_probe(struct platform_device *pdev)
+{
+ if (pdev->dev.platform_data)
+ pdata = pdev->dev.platform_data;
+ else
+ return -EINVAL;
+
+ return cpufreq_register_notifier(&vreg_cpufreq_notifier_block,
+ CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+/**
+ * bfin_dpmc_remove -
+ */
+static int __devexit bfin_dpmc_remove(struct platform_device *pdev)
+{
+ pdata = NULL;
+ return cpufreq_unregister_notifier(&vreg_cpufreq_notifier_block,
+ CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+struct platform_driver bfin_dpmc_device_driver = {
+ .probe = bfin_dpmc_probe,
+ .remove = __devexit_p(bfin_dpmc_remove),
+ .driver = {
+ .name = DRIVER_NAME,
+ }
+};
+
+/**
+ * bfin_dpmc_init - Init driver
+ */
+static int __init bfin_dpmc_init(void)
+{
+ return platform_driver_register(&bfin_dpmc_device_driver);
+}
+module_init(bfin_dpmc_init);
+
+/**
+ * bfin_dpmc_exit - break down driver
+ */
+static void __exit bfin_dpmc_exit(void)
+{
+ platform_driver_unregister(&bfin_dpmc_device_driver);
+}
+module_exit(bfin_dpmc_exit);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("cpu power management driver for Blackfin");
+MODULE_LICENSE("GPL");
diff --git a/arch/blackfin/mach-common/dpmc.S b/arch/blackfin/mach-common/dpmc_modes.S
index 9d45aa3265b1..b7981d31c392 100644
--- a/arch/blackfin/mach-common/dpmc.S
+++ b/arch/blackfin/mach-common/dpmc_modes.S
@@ -1,30 +1,7 @@
/*
- * File: arch/blackfin/mach-common/dpmc.S
- * Based on:
- * Author: LG Soft India
+ * Copyright 2004-2008 Analog Devices Inc.
*
- * Created: ?
- * Description: Watchdog Timer APIs
- *
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include <linux/linkage.h>
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index f2fb87e9a46e..038f70e0be65 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -151,26 +151,62 @@ ENTRY(_ex_soft_bp)
ENDPROC(_ex_soft_bp)
ENTRY(_ex_single_step)
+ /* If we just returned from an interrupt, the single step event is
+ for the RTI instruction. */
r7 = retx;
r6 = reti;
cc = r7 == r6;
- if cc jump _bfin_return_from_exception
- r7 = syscfg;
- bitclr (r7, 0);
- syscfg = R7;
+ if cc jump _bfin_return_from_exception;
+ /* If we were in user mode, do the single step normally. */
p5.l = lo(IPEND);
p5.h = hi(IPEND);
r6 = [p5];
- cc = bittst(r6, 5);
- if !cc jump _ex_trap_c;
- p4.l = lo(EVT5);
- p4.h = hi(EVT5);
- r6.h = _exception_to_level5;
- r6.l = _exception_to_level5;
- r7 = [p4];
- cc = r6 == r7;
- if !cc jump _ex_trap_c;
+ r7 = 0xffe0 (z);
+ r7 = r7 & r6;
+ cc = r7 == 0;
+ if !cc jump 1f;
+
+ /* Single stepping only a single instruction, so clear the trace
+ * bit here. */
+ r7 = syscfg;
+ bitclr (r7, 0);
+ syscfg = R7;
+ jump _ex_trap_c;
+
+1:
+ /*
+ * We were in an interrupt handler. By convention, all of them save
+ * SYSCFG with their first instruction, so by checking whether our
+ * RETX points at the entry point, we can determine whether to allow
+ * a single step, or whether to clear SYSCFG.
+ *
+ * First, find out the interrupt level and the event vector for it.
+ */
+ p5.l = lo(EVT0);
+ p5.h = hi(EVT0);
+ p5 += -4;
+2:
+ r7 = rot r7 by -1;
+ p5 += 4;
+ if !cc jump 2b;
+
+ /* What we actually do is test for the _second_ instruction in the
+ * IRQ handler. That way, if there are insns following the restore
+ * of SYSCFG after leaving the handler, we will not turn off SYSCFG
+ * for them. */
+
+ r7 = [p5];
+ r7 += 2;
+ r6 = RETX;
+ cc = R7 == R6;
+ if !cc jump _bfin_return_from_exception;
+
+ r7 = syscfg;
+ bitclr (r7, 0);
+ syscfg = R7;
+
+ /* Fall through to _bfin_return_from_exception. */
ENDPROC(_ex_single_step)
ENTRY(_bfin_return_from_exception)
@@ -234,20 +270,26 @@ ENTRY(_ex_trap_c)
p5.l = _saved_icplb_fault_addr;
[p5] = r7;
- p4.l = __retx;
- p4.h = __retx;
+ p4.l = _excpt_saved_stuff;
+ p4.h = _excpt_saved_stuff;
+
r6 = retx;
[p4] = r6;
- p4.l = lo(SAFE_USER_INSTRUCTION);
- p4.h = hi(SAFE_USER_INSTRUCTION);
- retx = p4;
+
+ r6 = SYSCFG;
+ [p4 + 4] = r6;
+ BITCLR(r6, 0);
+ SYSCFG = r6;
/* Disable all interrupts, but make sure level 5 is enabled so
* we can switch to that level. Save the old mask. */
cli r6;
- p4.l = _excpt_saved_imask;
- p4.h = _excpt_saved_imask;
- [p4] = r6;
+ [p4 + 8] = r6;
+
+ p4.l = lo(SAFE_USER_INSTRUCTION);
+ p4.h = hi(SAFE_USER_INSTRUCTION);
+ retx = p4;
+
r6 = 0x3f;
sti r6;
@@ -295,6 +337,11 @@ ENTRY(_double_fault)
*/
SAVE_ALL_SYS
+ /* The dumping functions expect the return address in the RETI
+ * slot. */
+ r6 = retx;
+ [sp + PT_PC] = r6;
+
r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */
SP += -12;
call _double_fault_c;
@@ -307,16 +354,17 @@ ENDPROC(_double_fault)
ENTRY(_exception_to_level5)
SAVE_ALL_SYS
- p4.l = __retx;
- p4.h = __retx;
+ p4.l = _excpt_saved_stuff;
+ p4.h = _excpt_saved_stuff;
r6 = [p4];
[sp + PT_PC] = r6;
+ r6 = [p4 + 4];
+ [sp + PT_SYSCFG] = r6;
+
/* Restore interrupt mask. We haven't pushed RETI, so this
* doesn't enable interrupts until we return from this handler. */
- p4.l = _excpt_saved_imask;
- p4.h = _excpt_saved_imask;
- r6 = [p4];
+ r6 = [p4 + 8];
sti r6;
/* Restore the hardware error vector. */
@@ -1344,7 +1392,14 @@ ENTRY(_sys_call_table)
.rept NR_syscalls-(.-_sys_call_table)/4
.long _sys_ni_syscall
.endr
-_excpt_saved_imask:
+
+ /*
+ * Used to save the real RETX, IMASK and SYSCFG when temporarily
+ * storing safe values across the transition from exception to IRQ5.
+ */
+_excpt_saved_stuff:
+ .long 0;
+ .long 0;
.long 0;
_exception_stack:
@@ -1358,7 +1413,3 @@ _exception_stack_top:
_last_cplb_fault_retx:
.long 0;
#endif
- /* Used to save the real RETX when temporarily storing a safe
- * return address. */
-__retx:
- .long 0;
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 8a2f6a1baa74..d6b4ead693b7 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -65,9 +65,6 @@ static void bfin_serial_stop_tx(struct uart_port *port)
{
struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
struct circ_buf *xmit = &uart->port.info->xmit;
-#if !defined(CONFIG_BF54x) && !defined(CONFIG_SERIAL_BFIN_DMA)
- unsigned short ier;
-#endif
while (!(UART_GET_LSR(uart) & TEMT))
cpu_relax();
@@ -82,12 +79,8 @@ static void bfin_serial_stop_tx(struct uart_port *port)
#ifdef CONFIG_BF54x
/* Clear TFI bit */
UART_PUT_LSR(uart, TFI);
- UART_CLEAR_IER(uart, ETBEI);
-#else
- ier = UART_GET_IER(uart);
- ier &= ~ETBEI;
- UART_PUT_IER(uart, ier);
#endif
+ UART_CLEAR_IER(uart, ETBEI);
#endif
}
@@ -102,14 +95,7 @@ static void bfin_serial_start_tx(struct uart_port *port)
if (uart->tx_done)
bfin_serial_dma_tx_chars(uart);
#else
-#ifdef CONFIG_BF54x
UART_SET_IER(uart, ETBEI);
-#else
- unsigned short ier;
- ier = UART_GET_IER(uart);
- ier |= ETBEI;
- UART_PUT_IER(uart, ier);
-#endif
bfin_serial_tx_chars(uart);
#endif
}
@@ -120,21 +106,10 @@ static void bfin_serial_start_tx(struct uart_port *port)
static void bfin_serial_stop_rx(struct uart_port *port)
{
struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
-#ifdef CONFIG_KGDB_UART
- if (uart->port.line != CONFIG_KGDB_UART_PORT) {
+#ifdef CONFIG_KGDB_UART
+ if (uart->port.line != CONFIG_KGDB_UART_PORT)
#endif
-#ifdef CONFIG_BF54x
UART_CLEAR_IER(uart, ERBFI);
-#else
- unsigned short ier;
-
- ier = UART_GET_IER(uart);
- ier &= ~ERBFI;
- UART_PUT_IER(uart, ier);
-#endif
-#ifdef CONFIG_KGDB_UART
- }
-#endif
}
/*
@@ -161,10 +136,7 @@ void kgdb_put_debug_char(int chr)
SSYNC();
}
-#ifndef CONFIG_BF54x
- UART_PUT_LCR(uart, UART_GET_LCR(uart)&(~DLAB));
- SSYNC();
-#endif
+ UART_CLEAR_DLAB(uart);
UART_PUT_CHAR(uart, (unsigned char)chr);
SSYNC();
}
@@ -183,10 +155,7 @@ int kgdb_get_debug_char(void)
while(!(UART_GET_LSR(uart) & DR)) {
SSYNC();
}
-#ifndef CONFIG_BF54x
- UART_PUT_LCR(uart, UART_GET_LCR(uart)&(~DLAB));
- SSYNC();
-#endif
+ UART_CLEAR_DLAB(uart);
chr = UART_GET_CHAR(uart);
SSYNC();
@@ -208,9 +177,6 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
struct tty_struct *tty = uart->port.info->tty;
unsigned int status, ch, flg;
static struct timeval anomaly_start = { .tv_sec = 0 };
-#ifdef CONFIG_KGDB_UART
- struct pt_regs *regs = get_irq_regs();
-#endif
status = UART_GET_LSR(uart);
UART_CLEAR_LSR(uart);
@@ -220,6 +186,7 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
#ifdef CONFIG_KGDB_UART
if (uart->port.line == CONFIG_KGDB_UART_PORT) {
+ struct pt_regs *regs = get_irq_regs();
if (uart->port.cons->index == CONFIG_KGDB_UART_PORT && ch == 0x1) { /* Ctrl + A */
kgdb_breakkey_pressed(regs);
return;
@@ -391,7 +358,6 @@ static void bfin_serial_do_work(struct work_struct *work)
static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
{
struct circ_buf *xmit = &uart->port.info->xmit;
- unsigned short ier;
uart->tx_done = 0;
@@ -429,13 +395,7 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
set_dma_x_modify(uart->tx_dma_channel, 1);
enable_dma(uart->tx_dma_channel);
-#ifdef CONFIG_BF54x
UART_SET_IER(uart, ETBEI);
-#else
- ier = UART_GET_IER(uart);
- ier |= ETBEI;
- UART_PUT_IER(uart, ier);
-#endif
}
static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart)
@@ -513,19 +473,12 @@ static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id)
{
struct bfin_serial_port *uart = dev_id;
struct circ_buf *xmit = &uart->port.info->xmit;
- unsigned short ier;
spin_lock(&uart->port.lock);
if (!(get_dma_curr_irqstat(uart->tx_dma_channel)&DMA_RUN)) {
disable_dma(uart->tx_dma_channel);
clear_dma_irqstat(uart->tx_dma_channel);
-#ifdef CONFIG_BF54x
UART_CLEAR_IER(uart, ETBEI);
-#else
- ier = UART_GET_IER(uart);
- ier &= ~ETBEI;
- UART_PUT_IER(uart, ier);
-#endif
xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1);
uart->port.icount.tx += uart->tx_count;
@@ -701,7 +654,6 @@ static int bfin_serial_startup(struct uart_port *port)
# endif
}
-
if (request_irq
(uart->port.irq+1, bfin_serial_tx_int, IRQF_DISABLED,
"BFIN_UART_TX", uart)) {
@@ -710,11 +662,7 @@ static int bfin_serial_startup(struct uart_port *port)
return -EBUSY;
}
#endif
-#ifdef CONFIG_BF54x
UART_SET_IER(uart, ERBFI);
-#else
- UART_PUT_IER(uart, UART_GET_IER(uart) | ERBFI);
-#endif
return 0;
}
@@ -810,26 +758,15 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
UART_PUT_IER(uart, 0);
#endif
-#ifndef CONFIG_BF54x
/* Set DLAB in LCR to Access DLL and DLH */
- val = UART_GET_LCR(uart);
- val |= DLAB;
- UART_PUT_LCR(uart, val);
- SSYNC();
-#endif
+ UART_SET_DLAB(uart);
UART_PUT_DLL(uart, quot & 0xFF);
- SSYNC();
UART_PUT_DLH(uart, (quot >> 8) & 0xFF);
SSYNC();
-#ifndef CONFIG_BF54x
/* Clear DLAB in LCR to Access THR RBR IER */
- val = UART_GET_LCR(uart);
- val &= ~DLAB;
- UART_PUT_LCR(uart, val);
- SSYNC();
-#endif
+ UART_CLEAR_DLAB(uart);
UART_PUT_LCR(uart, lcr);
@@ -992,8 +929,7 @@ bfin_serial_console_get_options(struct bfin_serial_port *uart, int *baud,
status = UART_GET_IER(uart) & (ERBFI | ETBEI);
if (status == (ERBFI | ETBEI)) {
/* ok, the port was enabled */
- unsigned short lcr, val;
- unsigned short dlh, dll;
+ u16 lcr, dlh, dll;
lcr = UART_GET_LCR(uart);
@@ -1010,22 +946,14 @@ bfin_serial_console_get_options(struct bfin_serial_port *uart, int *baud,
case 2: *bits = 7; break;
case 3: *bits = 8; break;
}
-#ifndef CONFIG_BF54x
/* Set DLAB in LCR to Access DLL and DLH */
- val = UART_GET_LCR(uart);
- val |= DLAB;
- UART_PUT_LCR(uart, val);
-#endif
+ UART_SET_DLAB(uart);
dll = UART_GET_DLL(uart);
dlh = UART_GET_DLH(uart);
-#ifndef CONFIG_BF54x
/* Clear DLAB in LCR to Access THR RBR IER */
- val = UART_GET_LCR(uart);
- val &= ~DLAB;
- UART_PUT_LCR(uart, val);
-#endif
+ UART_CLEAR_DLAB(uart);
*baud = get_sclk() / (16*(dll | dlh << 8));
}
@@ -1290,11 +1218,7 @@ static int __init bfin_serial_init(void)
request_irq(uart->port.irq, bfin_serial_rx_int,
IRQF_DISABLED, "BFIN_UART_RX", uart);
pr_info("Request irq for kgdb uart port\n");
-#ifdef CONFIG_BF54x
UART_SET_IER(uart, ERBFI);
-#else
- UART_PUT_IER(uart, UART_GET_IER(uart) | ERBFI);
-#endif
SSYNC();
t.c_cflag = CS8|B57600;
t.c_iflag = 0;
diff --git a/include/asm-blackfin/dpmc.h b/include/asm-blackfin/dpmc.h
index 686cf83a5269..7f34cd384f12 100644
--- a/include/asm-blackfin/dpmc.h
+++ b/include/asm-blackfin/dpmc.h
@@ -1,7 +1,7 @@
/*
* include/asm-blackfin/dpmc.h - Miscellaneous IOCTL commands for Dynamic Power
* Management Controller Driver.
- * Copyright (C) 2004 Analog Device Inc.
+ * Copyright (C) 2004-2008 Analog Device Inc.
*
*/
#ifndef _BLACKFIN_DPMC_H_
@@ -65,6 +65,14 @@ void disable_wdog_timer(void);
extern unsigned long get_cclk(void);
extern unsigned long get_sclk(void);
+struct bfin_dpmc_platform_data {
+ const unsigned int *tuple_tab;
+ unsigned short tabsize;
+ unsigned short vr_settling_time; /* in us */
+};
+
+#define VRPAIR(vlev, freq) (((vlev) << 16) | ((freq) >> 16))
+
#endif /* __KERNEL__ */
#endif /*_BLACKFIN_DPMC_H_*/
diff --git a/include/asm-blackfin/entry.h b/include/asm-blackfin/entry.h
index 562c6d3a3232..c4f721e0d00d 100644
--- a/include/asm-blackfin/entry.h
+++ b/include/asm-blackfin/entry.h
@@ -17,6 +17,11 @@
#define PF_DTRACE_OFF 1
#define PF_DTRACE_BIT 5
+/*
+ * NOTE! The single-stepping code assumes that all interrupt handlers
+ * start by saving SYSCFG on the stack with their first instruction.
+ */
+
/* This one is used for exceptions, emulation, and NMI. It doesn't push
RETI and doesn't do cli. */
#define SAVE_ALL_SYS save_context_no_interrupts
diff --git a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
index f0ab2736a680..26e3c8076b4e 100644
--- a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
@@ -44,10 +44,15 @@
#define UART_PUT_CHAR(uart, v) bfin_write16(((uart)->port.membase + OFFSET_THR), v)
#define UART_PUT_DLL(uart, v) bfin_write16(((uart)->port.membase + OFFSET_DLL), v)
#define UART_PUT_IER(uart, v) bfin_write16(((uart)->port.membase + OFFSET_IER), v)
+#define UART_SET_IER(uart, v) UART_PUT_IER(uart, UART_GET_IER(uart) | (v))
+#define UART_CLEAR_IER(uart, v) UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v))
#define UART_PUT_DLH(uart, v) bfin_write16(((uart)->port.membase + OFFSET_DLH), v)
#define UART_PUT_LCR(uart, v) bfin_write16(((uart)->port.membase + OFFSET_LCR), v)
#define UART_PUT_GCTL(uart, v) bfin_write16(((uart)->port.membase + OFFSET_GCTL), v)
+#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
+#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
+
#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
# define CONFIG_SERIAL_BFIN_CTSRTS
diff --git a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
index fbe88dee3e2d..d016603b6615 100644
--- a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
@@ -44,10 +44,15 @@
#define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v)
#define UART_PUT_DLL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLL),v)
#define UART_PUT_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER),v)
+#define UART_SET_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) | (v))
+#define UART_CLEAR_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v))
#define UART_PUT_DLH(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLH),v)
#define UART_PUT_LCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LCR),v)
#define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v)
+#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
+#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
+
#ifdef CONFIG_BFIN_UART0_CTSRTS
# define CONFIG_SERIAL_BFIN_CTSRTS
# ifndef CONFIG_UART0_CTS_PIN
diff --git a/include/asm-blackfin/mach-bf533/defBF532.h b/include/asm-blackfin/mach-bf533/defBF532.h
index 17e1548cec08..0ab4dd7494cf 100644
--- a/include/asm-blackfin/mach-bf533/defBF532.h
+++ b/include/asm-blackfin/mach-bf533/defBF532.h
@@ -468,6 +468,8 @@
#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */
#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */
#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */
+#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */
+#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */
#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */
#define SCKELOW 0x8000 /* Do Not Drive SCKE High During Reset After Hibernate */
diff --git a/include/asm-blackfin/mach-bf533/irq.h b/include/asm-blackfin/mach-bf533/irq.h
index 832e6f6122da..5aa38e5da6b7 100644
--- a/include/asm-blackfin/mach-bf533/irq.h
+++ b/include/asm-blackfin/mach-bf533/irq.h
@@ -66,12 +66,13 @@ Core Emulation **
DMA8/9 Interrupt IVG13 28
DMA10/11 Interrupt IVG13 29
Watchdog Timer IVG13 30
- Software Interrupt 1 IVG14 31
- Software Interrupt 2 --
+
+ Softirq IVG14 31
+ System Call --
(lowest priority) IVG15 32 *
*/
-#define SYS_IRQS 32
-#define NR_PERI_INTS 24
+#define SYS_IRQS 31
+#define NR_PERI_INTS 24
/* The ABSTRACT IRQ definitions */
/** the first seven of the following are fixed, the rest you change if you need to **/
@@ -96,7 +97,7 @@ Core Emulation **
#define IRQ_SPORT0_TX 17 /*DMA2 Interrupt (SPORT0 TX) */
#define IRQ_SPORT1_RX 18 /*DMA3 Interrupt (SPORT1 RX) */
#define IRQ_SPORT1_TX 19 /*DMA4 Interrupt (SPORT1 TX) */
-#define IRQ_SPI 20 /*DMA5 Interrupt (SPI) */
+#define IRQ_SPI 20 /*DMA5 Interrupt (SPI) */
#define IRQ_UART_RX 21 /*DMA6 Interrupt (UART RX) */
#define IRQ_UART_TX 22 /*DMA7 Interrupt (UART TX) */
#define IRQ_TMR0 23 /*Timer 0 */
@@ -108,9 +109,6 @@ Core Emulation **
#define IRQ_MEM_DMA1 29 /*DMA10/11 Interrupt (Memory DMA Stream 1) */
#define IRQ_WATCH 30 /*Watch Dog Timer */
-#define IRQ_SW_INT1 31 /*Software Int 1 */
-#define IRQ_SW_INT2 32 /*Software Int 2 (reserved for SYSCALL) */
-
#define IRQ_PF0 33
#define IRQ_PF1 34
#define IRQ_PF2 35
diff --git a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
index fd100a415b98..f79d1a0e9129 100644
--- a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
@@ -44,10 +44,15 @@
#define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v)
#define UART_PUT_DLL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLL),v)
#define UART_PUT_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER),v)
+#define UART_SET_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) | (v))
+#define UART_CLEAR_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v))
#define UART_PUT_DLH(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLH),v)
#define UART_PUT_LCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LCR),v)
#define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v)
+#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
+#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
+
#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
# define CONFIG_SERIAL_BFIN_CTSRTS
diff --git a/include/asm-blackfin/mach-bf537/irq.h b/include/asm-blackfin/mach-bf537/irq.h
index be6f2ff77f31..2e68a8a1e730 100644
--- a/include/asm-blackfin/mach-bf537/irq.h
+++ b/include/asm-blackfin/mach-bf537/irq.h
@@ -34,24 +34,23 @@
/*
* Interrupt source definitions
- Event Source Core Event Name
-Core Emulation **
- Events (highest priority) EMU 0
- Reset RST 1
- NMI NMI 2
- Exception EVX 3
- Reserved -- 4
- Hardware Error IVHW 5
- Core Timer IVTMR 6 *
-
-.....
-
- Software Interrupt 1 IVG14 31
- Software Interrupt 2 --
- (lowest priority) IVG15 32 *
+ * Event Source Core Event Name
+ * Core Emulation **
+ * Events (highest priority) EMU 0
+ * Reset RST 1
+ * NMI NMI 2
+ * Exception EVX 3
+ * Reserved -- 4
+ * Hardware Error IVHW 5
+ * Core Timer IVTMR 6
+ * .....
+ *
+ * Softirq IVG14
+ * System Call --
+ * (lowest priority) IVG15
*/
-#define SYS_IRQS 41
+#define SYS_IRQS 39
#define NR_PERI_INTS 32
/* The ABSTRACT IRQ definitions */
@@ -95,10 +94,8 @@ Core Emulation **
#define IRQ_PORTG_INTB 35 /* PF Port G (PF15:0) Interrupt B */
#define IRQ_MEM_DMA0 36 /*(Memory DMA Stream 0) */
#define IRQ_MEM_DMA1 37 /*(Memory DMA Stream 1) */
-#define IRQ_PROG_INTB 38 /* PF Ports F (PF15:0) Interrupt B */
+#define IRQ_PROG_INTB 38 /* PF Ports F (PF15:0) Interrupt B */
#define IRQ_WATCH 38 /*Watch Dog Timer */
-#define IRQ_SW_INT1 40 /*Software Int 1 */
-#define IRQ_SW_INT2 41 /*Software Int 2 (reserved for SYSCALL) */
#define IRQ_PPI_ERROR 42 /*PPI Error Interrupt */
#define IRQ_CAN_ERROR 43 /*CAN Error Interrupt */
diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
index 6547027cd3e6..5eb46a77d919 100644
--- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
@@ -54,6 +54,9 @@
#define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v)
#define UART_PUT_MCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_MCR),v)
+#define UART_SET_DLAB(uart) /* MMRs not muxed on BF54x */
+#define UART_CLEAR_DLAB(uart) /* MMRs not muxed on BF54x */
+
#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
# define CONFIG_SERIAL_BFIN_CTSRTS
diff --git a/include/asm-blackfin/mach-bf548/defBF54x_base.h b/include/asm-blackfin/mach-bf548/defBF54x_base.h
index 08f90c21fe8a..e022e896cb18 100644
--- a/include/asm-blackfin/mach-bf548/defBF54x_base.h
+++ b/include/asm-blackfin/mach-bf548/defBF54x_base.h
@@ -2329,6 +2329,26 @@
#define KPADWE 0x1000 /* Keypad Wake-Up Enable */
#define ROTWE 0x2000 /* Rotary Wake-Up Enable */
+#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */
+#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */
+#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */
+
+#define GAIN_5 0x0000 /* GAIN = 5*/
+#define GAIN_10 0x0004 /* GAIN = 1*/
+#define GAIN_20 0x0008 /* GAIN = 2*/
+#define GAIN_50 0x000C /* GAIN = 5*/
+
+#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */
+#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */
+#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */
+#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */
+#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */
+#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */
+#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */
+#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */
+#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */
+#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */
+
/* Bit masks for NFC_CTL */
#define WR_DLY 0xf /* Write Strobe Delay */
diff --git a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
index 8a4e66d1db37..7a9628769296 100644
--- a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
@@ -44,10 +44,15 @@
#define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v)
#define UART_PUT_DLL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLL),v)
#define UART_PUT_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER),v)
+#define UART_SET_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) | (v))
+#define UART_CLEAR_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v))
#define UART_PUT_DLH(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLH),v)
#define UART_PUT_LCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LCR),v)
#define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v)
+#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
+#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
+
#ifdef CONFIG_BFIN_UART0_CTSRTS
# define CONFIG_SERIAL_BFIN_CTSRTS
# ifndef CONFIG_UART0_CTS_PIN
diff --git a/include/asm-blackfin/mach-bf561/defBF561.h b/include/asm-blackfin/mach-bf561/defBF561.h
index 366c9b9a0cb7..1ab50e906fe7 100644
--- a/include/asm-blackfin/mach-bf561/defBF561.h
+++ b/include/asm-blackfin/mach-bf561/defBF561.h
@@ -868,6 +868,34 @@
#define CHIPID_FAMILY 0x0FFFF000
#define CHIPID_MANUFACTURE 0x00000FFE
+/* VR_CTL Masks */
+#define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */
+#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */
+#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */
+#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */
+#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */
+
+#define GAIN 0x000C /* Voltage Level Gain */
+#define GAIN_5 0x0000 /* GAIN = 5*/
+#define GAIN_10 0x0004 /* GAIN = 1*/
+#define GAIN_20 0x0008 /* GAIN = 2*/
+#define GAIN_50 0x000C /* GAIN = 5*/
+
+#define VLEV 0x00F0 /* Internal Voltage Level */
+#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */
+#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */
+#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */
+#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */
+#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */
+#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */
+#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */
+#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */
+#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */
+#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */
+
+#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */
+#define SCKELOW 0x8000 /* Do Not Drive SCKE High During Reset After Hibernate */
+
/* PLL_DIV Masks */
#define SCLK_DIV(x) (x) /* SCLK = VCO / x */
diff --git a/include/asm-blackfin/mach-bf561/irq.h b/include/asm-blackfin/mach-bf561/irq.h
index 83f0383957d2..6698389c5564 100644
--- a/include/asm-blackfin/mach-bf561/irq.h
+++ b/include/asm-blackfin/mach-bf561/irq.h
@@ -118,12 +118,13 @@
Supplemental interrupt 0 IVG7 69
supplemental interrupt 1 IVG7 70
- Software Interrupt 1 IVG14 71
- Software Interrupt 2 IVG15 72 *
- (lowest priority)
+ Softirq IVG14
+ System Call --
+ (lowest priority) IVG15
+
**********************************************************************/
-#define SYS_IRQS 72
+#define SYS_IRQS 71
#define NR_PERI_INTS 64
/*
@@ -237,9 +238,7 @@
#define IRQ_RESERVED_2 (IVG_BASE + 61) /* Reserved interrupt */
#define IRQ_SUPPLE_0 (IVG_BASE + 62) /* Supplemental interrupt 0 */
#define IRQ_SUPPLE_1 (IVG_BASE + 63) /* supplemental interrupt 1 */
-#define IRQ_SW_INT1 71 /* Software Interrupt 1 */
-#define IRQ_SW_INT2 72 /* Software Interrupt 2 */
- /* reserved for SYSCALL */
+
#define IRQ_PF0 73
#define IRQ_PF1 74
#define IRQ_PF2 75
diff --git a/include/asm-blackfin/mach-common/context.S b/include/asm-blackfin/mach-common/context.S
index fd0ebe1862b8..c0e630edfb9a 100644
--- a/include/asm-blackfin/mach-common/context.S
+++ b/include/asm-blackfin/mach-common/context.S
@@ -28,6 +28,11 @@
*/
/*
+ * NOTE! The single-stepping code assumes that all interrupt handlers
+ * start by saving SYSCFG on the stack with their first instruction.
+ */
+
+/*
* Code to save processor context.
* We even save the register which are preserved by a function call
* - r4, r5, r6, r7, p3, p4, p5
diff --git a/include/asm-blackfin/time.h b/include/asm-blackfin/time.h
index 6e5859b6ea32..ddc43ce38533 100644
--- a/include/asm-blackfin/time.h
+++ b/include/asm-blackfin/time.h
@@ -24,6 +24,8 @@
#ifndef CONFIG_CPU_FREQ
#define TIME_SCALE 1
+#define __bfin_cycles_off (0)
+#define __bfin_cycles_mod (0)
#else
/*
* Blackfin CPU frequency scaling supports max Core Clock 1, 1/2 and 1/4 .
@@ -31,6 +33,8 @@
* adjust the Core Timer Presale Register. This way we don't lose time.
*/
#define TIME_SCALE 4
+extern unsigned long long __bfin_cycles_off;
+extern unsigned int __bfin_cycles_mod;
#endif
#endif