summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorYong Wang <yong.y.wang@linux.intel.com>2009-12-16 12:58:46 +0800
committerGreg Kroah-Hartman <gregkh@suse.de>2009-12-18 14:05:43 -0800
commit21fc7b8d8c49b0f6ce7a45ae44361d31e93e629a (patch)
treefa2bb71faf5928a92fcedc357e4b4a8bf3b8e82b
parent2e20f8fadd921fa3d664bb120f99b380a1b05cbd (diff)
x86: Under BIOS control, restore AP's APIC_LVTTHMR to the BSP value
Upstream commit a2202aa29289db64ca7988b12343158b67b27f10. On platforms where bios handles the thermal monitor interrupt, APIC_LVTTHMR on each logical CPU is programmed to generate a SMI and OS can't touch it. Unfortunately AP bringup sequence using INIT-SIPI-SIPI clear all the LVT entries except the mask bit. Essentially this results in all LVT entries including the thermal monitoring interrupt set to masked (clearing the bios programmed value for APIC_LVTTHMR). And this leads to kernel take over the thermal monitoring interrupt on AP's but not on BSP (leaving the bios programmed value only on BSP). As a result of this, we have seen system hangs when the thermal monitoring interrupt is generated. Fix this by reading the initial value of thermal LVT entry on BSP and if bios has taken over the control, then program the same value on all AP's and leave the thermal monitoring interrupt control on all the logical cpu's to the bios. Signed-off-by: Yong Wang <yong.y.wang@intel.com> Reviewed-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Arjan van de Ven <arjan@infradead.org> LKML-Reference: <20091110013824.GA24940@ywang-moblin2.bj.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-rw-r--r--arch/x86/include/asm/mce.h6
-rw-r--r--arch/x86/kernel/cpu/mcheck/therm_throt.c29
-rw-r--r--arch/x86/kernel/setup.c3
3 files changed, 37 insertions, 1 deletions
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index f1363b72364f..a47902354261 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -214,5 +214,11 @@ void intel_init_thermal(struct cpuinfo_x86 *c);
void mce_log_therm_throt_event(__u64 status);
+#ifdef CONFIG_X86_THERMAL_VECTOR
+extern void mcheck_intel_therm_init(void);
+#else
+static inline void mcheck_intel_therm_init(void) { }
+#endif
+
#endif /* __KERNEL__ */
#endif /* _ASM_X86_MCE_H */
diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c
index b3a1dba75330..4fef985fc221 100644
--- a/arch/x86/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c
@@ -49,6 +49,8 @@ static DEFINE_PER_CPU(struct thermal_state, thermal_state);
static atomic_t therm_throt_en = ATOMIC_INIT(0);
+static u32 lvtthmr_init __read_mostly;
+
#ifdef CONFIG_SYSFS
#define define_therm_throt_sysdev_one_ro(_name) \
static SYSDEV_ATTR(_name, 0444, therm_throt_sysdev_show_##_name, NULL)
@@ -254,6 +256,18 @@ asmlinkage void smp_thermal_interrupt(struct pt_regs *regs)
ack_APIC_irq();
}
+void __init mcheck_intel_therm_init(void)
+{
+ /*
+ * This function is only called on boot CPU. Save the init thermal
+ * LVT value on BSP and use that value to restore APs' thermal LVT
+ * entry BIOS programmed later
+ */
+ if (cpu_has(&boot_cpu_data, X86_FEATURE_ACPI) &&
+ cpu_has(&boot_cpu_data, X86_FEATURE_ACC))
+ lvtthmr_init = apic_read(APIC_LVTTHMR);
+}
+
void intel_init_thermal(struct cpuinfo_x86 *c)
{
unsigned int cpu = smp_processor_id();
@@ -270,7 +284,20 @@ void intel_init_thermal(struct cpuinfo_x86 *c)
* since it might be delivered via SMI already:
*/
rdmsr(MSR_IA32_MISC_ENABLE, l, h);
- h = apic_read(APIC_LVTTHMR);
+
+ /*
+ * The initial value of thermal LVT entries on all APs always reads
+ * 0x10000 because APs are woken up by BSP issuing INIT-SIPI-SIPI
+ * sequence to them and LVT registers are reset to 0s except for
+ * the mask bits which are set to 1s when APs receive INIT IPI.
+ * Always restore the value that BIOS has programmed on AP based on
+ * BSP's info we saved since BIOS is always setting the same value
+ * for all threads/cores
+ */
+ apic_write(APIC_LVTTHMR, lvtthmr_init);
+
+ h = lvtthmr_init;
+
if ((l & MSR_IA32_MISC_ENABLE_TM1) && (h & APIC_DM_SMI)) {
printk(KERN_DEBUG
"CPU%d: Thermal monitoring handled by SMI\n", cpu);
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 2a34f9c5be21..51aa5b211c67 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -109,6 +109,7 @@
#ifdef CONFIG_X86_64
#include <asm/numa_64.h>
#endif
+#include <asm/mce.h>
/*
* end_pfn only includes RAM, while max_pfn_mapped includes all e820 entries.
@@ -1031,6 +1032,8 @@ void __init setup_arch(char **cmdline_p)
#endif
#endif
x86_init.oem.banner();
+
+ mcheck_intel_therm_init();
}
#ifdef CONFIG_X86_32