summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorHuang, Ying <ying.huang@intel.com>2007-10-24 10:18:49 +0800
committerThomas Gleixner <tglx@linutronix.de>2007-10-30 00:22:22 +0100
commitaa69432a68fb0aec49551fd69fe920a6df572573 (patch)
tree65e354e8025a594bd8197885cbc9c9f557c730d6 /Documentation
parent076e21a0142ac33d53bc0cca58c6170d4ad14f5d (diff)
x86 boot: document for 32 bit boot protocol
This patch documents the 32-bit boot protocol of x86. It has been used by Kexec and LinuxBIOS. This patch is based on the proposal of Peter Anvin. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/i386/boot.txt38
-rw-r--r--Documentation/i386/zero-page.txt122
2 files changed, 65 insertions, 95 deletions
diff --git a/Documentation/i386/boot.txt b/Documentation/i386/boot.txt
index 2f75e750e4f5..fc49b79bc1ab 100644
--- a/Documentation/i386/boot.txt
+++ b/Documentation/i386/boot.txt
@@ -785,3 +785,41 @@ IMPORTANT: All the hooks are required to preserve %esp, %ebp, %esi and
After completing your hook, you should jump to the address
that was in this field before your boot loader overwrote it
(relocated, if appropriate.)
+
+
+**** 32-bit BOOT PROTOCOL
+
+For machine with some new BIOS other than legacy BIOS, such as EFI,
+LinuxBIOS, etc, and kexec, the 16-bit real mode setup code in kernel
+based on legacy BIOS can not be used, so a 32-bit boot protocol needs
+to be defined.
+
+In 32-bit boot protocol, the first step in loading a Linux kernel
+should be to setup the boot parameters (struct boot_params,
+traditionally known as "zero page"). The memory for struct boot_params
+should be allocated and initialized to all zero. Then the setup header
+from offset 0x01f1 of kernel image on should be loaded into struct
+boot_params and examined. The end of setup header can be calculated as
+follow:
+
+ 0x0202 + byte value at offset 0x0201
+
+In addition to read/modify/write the setup header of the struct
+boot_params as that of 16-bit boot protocol, the boot loader should
+also fill the additional fields of the struct boot_params as that
+described in zero-page.txt.
+
+After setupping the struct boot_params, the boot loader can load the
+32/64-bit kernel in the same way as that of 16-bit boot protocol.
+
+In 32-bit boot protocol, the kernel is started by jumping to the
+32-bit kernel entry point, which is the start address of loaded
+32/64-bit kernel.
+
+At entry, the CPU must be in 32-bit protected mode with paging
+disabled; a GDT must be loaded with the descriptors for selectors
+__BOOT_CS(0x10) and __BOOT_DS(0x18); both descriptors must be 4G flat
+segment; __BOOS_CS must have execute/read permission, and __BOOT_DS
+must have read/write permission; CS must be __BOOT_CS and DS, ES, SS
+must be __BOOT_DS; interrupt must be disabled; %esi must hold the base
+address of the struct boot_params; %ebp, %edi and %ebx must be zero.
diff --git a/Documentation/i386/zero-page.txt b/Documentation/i386/zero-page.txt
index 6c0817c45683..169ad423a3d1 100644
--- a/Documentation/i386/zero-page.txt
+++ b/Documentation/i386/zero-page.txt
@@ -1,99 +1,31 @@
----------------------------------------------------------------------------
-!!!!!!!!!!!!!!!WARNING!!!!!!!!
-The zero page is a kernel internal data structure, not a stable ABI. It might change
-without warning and the kernel has no way to detect old version of it.
-If you're writing some external code like a boot loader you should only use
-the stable versioned real mode boot protocol described in boot.txt. Otherwise the kernel
-might break you at any time.
-!!!!!!!!!!!!!WARNING!!!!!!!!!!!
-----------------------------------------------------------------------------
+The additional fields in struct boot_params as a part of 32-bit boot
+protocol of kernel. These should be filled by bootloader or 16-bit
+real-mode setup code of the kernel. References/settings to it mainly
+are in:
-Summary of boot_params layout (kernel point of view)
- ( collected by Hans Lermen and Martin Mares )
-
-The contents of boot_params are used to pass parameters from the
-16-bit realmode code of the kernel to the 32-bit part. References/settings
-to it mainly are in:
+ include/asm-x86/bootparam.h
- arch/i386/boot/setup.S
- arch/i386/boot/video.S
- arch/i386/kernel/head.S
- arch/i386/kernel/setup.c
-
-Offset Type Description
------- ---- -----------
- 0 32 bytes struct screen_info, SCREEN_INFO
- ATTENTION, overlaps the following !!!
- 2 unsigned short EXT_MEM_K, extended memory size in Kb (from int 0x15)
- 0x20 unsigned short CL_MAGIC, commandline magic number (=0xA33F)
- 0x22 unsigned short CL_OFFSET, commandline offset
- Address of commandline is calculated:
- 0x90000 + contents of CL_OFFSET
- (only taken, when CL_MAGIC = 0xA33F)
- 0x40 20 bytes struct apm_bios_info, APM_BIOS_INFO
- 0x60 16 bytes Intel SpeedStep (IST) BIOS support information
- 0x80 16 bytes hd0-disk-parameter from intvector 0x41
- 0x90 16 bytes hd1-disk-parameter from intvector 0x46
+Offset Proto Name Meaning
+/Size
- 0xa0 16 bytes System description table truncated to 16 bytes.
- ( struct sys_desc_table_struct )
- 0xb0 - 0x13f Free. Add more parameters here if you really need them.
- 0x140- 0x1be EDID_INFO Video mode setup
-
-0x1c4 unsigned long EFI system table pointer
-0x1c8 unsigned long EFI memory descriptor size
-0x1cc unsigned long EFI memory descriptor version
-0x1d0 unsigned long EFI memory descriptor map pointer
-0x1d4 unsigned long EFI memory descriptor map size
-0x1e0 unsigned long ALT_MEM_K, alternative mem check, in Kb
-0x1e4 unsigned long Scratch field for the kernel setup code
-0x1e8 char number of entries in E820MAP (below)
-0x1e9 unsigned char number of entries in EDDBUF (below)
-0x1ea unsigned char number of entries in EDD_MBR_SIG_BUFFER (below)
-0x1f1 char size of setup.S, number of sectors
-0x1f2 unsigned short MOUNT_ROOT_RDONLY (if !=0)
-0x1f4 unsigned short size of compressed kernel-part in the
- (b)zImage-file (in 16 byte units, rounded up)
-0x1f6 unsigned short swap_dev (unused AFAIK)
-0x1f8 unsigned short RAMDISK_FLAGS
-0x1fa unsigned short VGA-Mode (old one)
-0x1fc unsigned short ORIG_ROOT_DEV (high=Major, low=minor)
-0x1ff char AUX_DEVICE_INFO
-
-0x200 short jump to start of setup code aka "reserved" field.
-0x202 4 bytes Signature for SETUP-header, ="HdrS"
-0x206 unsigned short Version number of header format
- Current version is 0x0201...
-0x208 8 bytes (used by setup.S for communication with boot loaders,
- look there)
-0x210 char LOADER_TYPE, = 0, old one
- else it is set by the loader:
- 0xTV: T=0 for LILO
- 1 for Loadlin
- 2 for bootsect-loader
- 3 for SYSLINUX
- 4 for ETHERBOOT
- 5 for ELILO
- 7 for GRuB
- 8 for U-BOOT
- 9 for Xen
- V = version
-0x211 char loadflags:
- bit0 = 1: kernel is loaded high (bzImage)
- bit7 = 1: Heap and pointer (see below) set by boot
- loader.
-0x212 unsigned short (setup.S)
-0x214 unsigned long KERNEL_START, where the loader started the kernel
-0x218 unsigned long INITRD_START, address of loaded ramdisk image
-0x21c unsigned long INITRD_SIZE, size in bytes of ramdisk image
-0x220 4 bytes (setup.S)
-0x224 unsigned short setup.S heap end pointer
-0x226 unsigned short zero_pad
-0x228 unsigned long cmd_line_ptr
-0x22c unsigned long ramdisk_max
-0x230 16 bytes trampoline
-0x290 - 0x2cf EDD_MBR_SIG_BUFFER (edd.S)
-0x2d0 - 0xd00 E820MAP
-0xd00 - 0xeff EDDBUF (edd.S) for disk signature read sector
-0xd00 - 0xeeb EDDBUF (edd.S) for edd data
+000/040 ALL screen_info Text mode or frame buffer information
+ (struct screen_info)
+040/014 ALL apm_bios_info APM BIOS information (struct apm_bios_info)
+060/010 ALL ist_info Intel SpeedStep (IST) BIOS support information
+ (struct ist_info)
+080/010 ALL hd0_info hd0 disk parameter, OBSOLETE!!
+090/010 ALL hd1_info hd1 disk parameter, OBSOLETE!!
+0A0/010 ALL sys_desc_table System description table (struct sys_desc_table)
+140/080 ALL edid_info Video mode setup (struct edid_info)
+1C0/020 ALL efi_info EFI 32 information (struct efi_info)
+1E0/004 ALL alk_mem_k Alternative mem check, in KB
+1E4/004 ALL scratch Scratch field for the kernel setup code
+1E8/001 ALL e820_entries Number of entries in e820_map (below)
+1E9/001 ALL eddbuf_entries Number of entries in eddbuf (below)
+1EA/001 ALL edd_mbr_sig_buf_entries Number of entries in edd_mbr_sig_buffer
+ (below)
+290/040 ALL edd_mbr_sig_buffer EDD MBR signatures
+2D0/A00 ALL e820_map E820 memory map table
+ (array of struct e820entry)
+D00/1EC ALL eddbuf EDD data (array of struct edd_info)