summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@g5.osdl.org>2006-04-02 13:08:49 -0700
committerLinus Torvalds <torvalds@g5.osdl.org>2006-04-02 13:08:49 -0700
commitf27f0a045b79de5729d064497e21a70871f1d6fe (patch)
tree078416852de43b76e297224b57a9c5b9f67dfb56 /Documentation
parent6e0dd741a89be35defa05bd79f4211c5a2762825 (diff)
parentc2f60c523aa34cf6d4913d6efc670890bd456fd5 (diff)
Merge master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa
* master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa: (28 commits) [ALSA] Kconfig SND_SEQUENCER_OSS help text fix [ALSA] Add Aux input switch control for Aureon Universe [ALSA] pcxhr - Fix the crash with REV01 board [ALSA] sound/pci/hda: use create_singlethread_workqueue() [ALSA] hda-intel - Add support of ATI SB600 [ALSA] cs4281 - Fix the check of timeout in probe [ALSA] cs4281 - Fix the check of right channel [ALSA] Test volume resolution of usb audio at initialization [ALSA] maestro3.c: fix BUG, optimization [ALSA] HDA/Realtek: multiple input mux definitions and pin mode additions [ALSA] AdLib FM card driver [ALSA] Fix / clean up PCM-OSS setup hooks [ALSA] Clean up PCM codes (take 2) [ALSA] Tiny clean up of PCM codes [ALSA] ISA drivers bailing on first !enable[i] [ALSA] Remove obsolete kfree_nocheck call [ALSA] Remove obsolete kfree_nocheck call [ALSA] Add snd-als300 driver for Avance Logic ALS300/ALS300+ soundcards [ALSA] Add snd-riptide driver for Conexant Riptide chip [ALSA] hda-codec - Fix noisy output wtih AD1986A 3stack model ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/sound/alsa/ALSA-Configuration.txt69
1 files changed, 69 insertions, 0 deletions
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 1def6049784c..0ee2c7dfc482 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -120,6 +120,34 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
enable - enable card
- Default: enabled, for PCI and ISA PnP cards
+ Module snd-adlib
+ ----------------
+
+ Module for AdLib FM cards.
+
+ port - port # for OPL chip
+
+ This module supports multiple cards. It does not support autoprobe, so
+ the port must be specified. For actual AdLib FM cards it will be 0x388.
+ Note that this card does not have PCM support and no mixer; only FM
+ synthesis.
+
+ Make sure you have "sbiload" from the alsa-tools package available and,
+ after loading the module, find out the assigned ALSA sequencer port
+ number through "sbiload -l". Example output:
+
+ Port Client name Port name
+ 64:0 OPL2 FM synth OPL2 FM Port
+
+ Load the std.sb and drums.sb patches also supplied by sbiload:
+
+ sbiload -p 64:0 std.sb drums.sb
+
+ If you use this driver to drive an OPL3, you can use std.o3 and drums.o3
+ instead. To have the card produce sound, use aplaymidi from alsa-utils:
+
+ aplaymidi -p 64:0 foo.mid
+
Module snd-ad1816a
------------------
@@ -190,6 +218,15 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
The power-management is supported.
+ Module snd-als300
+ -----------------
+
+ Module for Avance Logic ALS300 and ALS300+
+
+ This module supports multiple cards.
+
+ The power-management is supported.
+
Module snd-als4000
------------------
@@ -701,6 +738,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
uniwill 3-jack
F1734 2-jack
lg LG laptop (m1 express dual)
+ lg-lw LG LW20 laptop
test for testing/debugging purpose, almost all controls can be
adjusted. Appearing only when compiled with
$CONFIG_SND_DEBUG=y
@@ -1013,6 +1051,23 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
The power-management is supported.
+ Module snd-miro
+ ---------------
+
+ Module for Miro soundcards: miroSOUND PCM 1 pro,
+ miroSOUND PCM 12,
+ miroSOUND PCM 20 Radio.
+
+ port - Port # (0x530,0x604,0xe80,0xf40)
+ irq - IRQ # (5,7,9,10,11)
+ dma1 - 1st dma # (0,1,3)
+ dma2 - 2nd dma # (0,1)
+ mpu_port - MPU-401 port # (0x300,0x310,0x320,0x330)
+ mpu_irq - MPU-401 irq # (5,7,9,10)
+ fm_port - FM Port # (0x388)
+ wss - enable WSS mode
+ ide - enable onboard ide support
+
Module snd-mixart
-----------------
@@ -1202,6 +1257,20 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
The power-management is supported.
+ Module snd-riptide
+ ------------------
+
+ Module for Conexant Riptide chip
+
+ joystick_port - Joystick port # (default: 0x200)
+ mpu_port - MPU401 port # (default: 0x330)
+ opl3_port - OPL3 port # (default: 0x388)
+
+ This module supports multiple cards.
+ The driver requires the firmware loader support on kernel.
+ You need to install the firmware file "riptide.hex" to the standard
+ firmware path (e.g. /lib/firmware).
+
Module snd-rme32
----------------