summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-01-29 20:49:12 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2014-01-29 20:49:12 -0800
commit9b0cd304f26b9fca140de15deeac2bf357d1f388 (patch)
tree03a0d74614865a5b776b2a98a433232013b1d369 /Documentation
parentca2a650f3dfdc30d71d21bcbb04d2d057779f3f9 (diff)
parentef64cf9d06049e4e9df661f3be60b217e476bee1 (diff)
Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie: "Been a bit busy, first week of kids school, and waiting on other trees to go in before I could send this, so its a bit later than I'd normally like. Highlights: - core: timestamp fixes, lots of misc cleanups - new drivers: bochs virtual vga - vmwgfx: major overhaul for their nextgen virt gpu. - i915: runtime D3 on HSW, watermark fixes, power well work, fbc fixes, bdw is no longer prelim. - nouveau: gk110/208 acceleration, more pm groundwork, old overlay support - radeon: dpm rework and clockgating for CIK, pci config reset, big endian fixes - tegra: panel support and DSI support, build as module, prime. - armada, omap, gma500, rcar, exynos, mgag200, cirrus, ast: fixes - msm: hdmi support for mdp5" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (595 commits) drm/nouveau: resume display if any later suspend bits fail drm/nouveau: fix lock unbalance in nouveau_crtc_page_flip drm/nouveau: implement hooks for needed for drm vblank timestamping support drm/nouveau/disp: add a method to fetch info needed by drm vblank timestamping drm/nv50: fill in crtc mode struct members from crtc_mode_fixup drm/radeon/dce8: workaround for atom BlankCrtc table drm/radeon/DCE4+: clear bios scratch dpms bit (v2) drm/radeon: set si_notify_smc_display_change properly drm/radeon: fix DAC interrupt handling on DCE5+ drm/radeon: clean up active vram sizing drm/radeon: skip async dma init on r6xx drm/radeon/runpm: don't runtime suspend non-PX cards drm/radeon: add ring to fence trace functions drm/radeon: add missing trace point drm/radeon: fix VMID use tracking drm: ast,cirrus,mgag200: use drm_can_sleep drm/gma500: Lock struct_mutex around cursor updates drm/i915: Fix the offset issue for the stolen GEM objects DRM: armada: fix missing DRM_KMS_FB_HELPER select drm/i915: Decouple GPU error reporting from ring initialisation ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt19
-rw-r--r--Documentation/devicetree/bindings/mipi/dsi/mipi-dsi-bus.txt98
-rw-r--r--Documentation/devicetree/bindings/mipi/nvidia,tegra114-mipi.txt41
-rw-r--r--Documentation/devicetree/bindings/panel/auo,b101aw03.txt7
-rw-r--r--Documentation/devicetree/bindings/panel/chunghwa,claa101wa01a.txt7
-rw-r--r--Documentation/devicetree/bindings/panel/chunghwa,claa101wb03.txt7
-rw-r--r--Documentation/devicetree/bindings/panel/panasonic,vvx10f004b00.txt7
-rw-r--r--Documentation/devicetree/bindings/panel/samsung,ltn101nt05.txt7
-rw-r--r--Documentation/devicetree/bindings/panel/simple-panel.txt21
9 files changed, 212 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt
index ab45c02aa658..efaeec8961b6 100644
--- a/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt
+++ b/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt
@@ -118,6 +118,9 @@ of the following host1x client modules:
See ../reset/reset.txt for details.
- reset-names: Must include the following entries:
- dc
+ - nvidia,head: The number of the display controller head. This is used to
+ setup the various types of output to receive video data from the given
+ head.
Each display controller node has a child node, named "rgb", that represents
the RGB output associated with the controller. It can take the following
@@ -125,6 +128,7 @@ of the following host1x client modules:
- nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
- nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
- nvidia,edid: supplies a binary EDID blob
+ - nvidia,panel: phandle of a display panel
- hdmi: High Definition Multimedia Interface
@@ -149,6 +153,7 @@ of the following host1x client modules:
- nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
- nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
- nvidia,edid: supplies a binary EDID blob
+ - nvidia,panel: phandle of a display panel
- tvo: TV encoder output
@@ -169,11 +174,21 @@ of the following host1x client modules:
- clock-names: Must include the following entries:
- dsi
This MUST be the first entry.
+ - lp
- parent
- resets: Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names: Must include the following entries:
- dsi
+ - nvidia,mipi-calibrate: Should contain a phandle and a specifier specifying
+ which pads are used by this DSI output and need to be calibrated. See also
+ ../mipi/nvidia,tegra114-mipi.txt.
+
+ Optional properties:
+ - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
+ - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
+ - nvidia,edid: supplies a binary EDID blob
+ - nvidia,panel: phandle of a display panel
Example:
@@ -253,7 +268,7 @@ Example:
interrupts = <0 73 0x04>;
clocks = <&tegra_car TEGRA20_CLK_DISP1>,
<&tegra_car TEGRA20_CLK_PLL_P>;
- clock-names = "disp1", "parent";
+ clock-names = "dc", "parent";
resets = <&tegra_car 27>;
reset-names = "dc";
@@ -268,7 +283,7 @@ Example:
interrupts = <0 74 0x04>;
clocks = <&tegra_car TEGRA20_CLK_DISP2>,
<&tegra_car TEGRA20_CLK_PLL_P>;
- clock-names = "disp2", "parent";
+ clock-names = "dc", "parent";
resets = <&tegra_car 26>;
reset-names = "dc";
diff --git a/Documentation/devicetree/bindings/mipi/dsi/mipi-dsi-bus.txt b/Documentation/devicetree/bindings/mipi/dsi/mipi-dsi-bus.txt
new file mode 100644
index 000000000000..973c27273772
--- /dev/null
+++ b/Documentation/devicetree/bindings/mipi/dsi/mipi-dsi-bus.txt
@@ -0,0 +1,98 @@
+MIPI DSI (Display Serial Interface) busses
+==========================================
+
+The MIPI Display Serial Interface specifies a serial bus and a protocol for
+communication between a host and up to four peripherals. This document will
+define the syntax used to represent a DSI bus in a device tree.
+
+This document describes DSI bus-specific properties only or defines existing
+standard properties in the context of the DSI bus.
+
+Each DSI host provides a DSI bus. The DSI host controller's node contains a
+set of properties that characterize the bus. Child nodes describe individual
+peripherals on that bus.
+
+The following assumes that only a single peripheral is connected to a DSI
+host. Experience shows that this is true for the large majority of setups.
+
+DSI host
+--------
+
+In addition to the standard properties and those defined by the parent bus of
+a DSI host, the following properties apply to a node representing a DSI host.
+
+Required properties:
+- #address-cells: The number of cells required to represent an address on the
+ bus. DSI peripherals are addressed using a 2-bit virtual channel number, so
+ a maximum of 4 devices can be addressed on a single bus. Hence the value of
+ this property should be 1.
+- #size-cells: Should be 0. There are cases where it makes sense to use a
+ different value here. See below.
+
+DSI peripheral
+--------------
+
+Peripherals are represented as child nodes of the DSI host's node. Properties
+described here apply to all DSI peripherals, but individual bindings may want
+to define additional, device-specific properties.
+
+Required properties:
+- reg: The virtual channel number of a DSI peripheral. Must be in the range
+ from 0 to 3.
+
+Some DSI peripherals respond to more than a single virtual channel. In that
+case two alternative representations can be chosen:
+- The reg property can take multiple entries, one for each virtual channel
+ that the peripheral responds to.
+- If the virtual channels that a peripheral responds to are consecutive, the
+ #size-cells can be set to 1. The first cell of each entry in the reg
+ property is the number of the first virtual channel and the second cell is
+ the number of consecutive virtual channels.
+
+Example
+-------
+
+ dsi-host {
+ ...
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* peripheral responds to virtual channel 0 */
+ peripheral@0 {
+ compatible = "...";
+ reg = <0>;
+ };
+
+ ...
+ };
+
+ dsi-host {
+ ...
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* peripheral responds to virtual channels 0 and 2 */
+ peripheral@0 {
+ compatible = "...";
+ reg = <0, 2>;
+ };
+
+ ...
+ };
+
+ dsi-host {
+ ...
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* peripheral responds to virtual channels 1, 2 and 3 */
+ peripheral@1 {
+ compatible = "...";
+ reg = <1 3>;
+ };
+
+ ...
+ };
diff --git a/Documentation/devicetree/bindings/mipi/nvidia,tegra114-mipi.txt b/Documentation/devicetree/bindings/mipi/nvidia,tegra114-mipi.txt
new file mode 100644
index 000000000000..e4a25cedc5cf
--- /dev/null
+++ b/Documentation/devicetree/bindings/mipi/nvidia,tegra114-mipi.txt
@@ -0,0 +1,41 @@
+NVIDIA Tegra MIPI pad calibration controller
+
+Required properties:
+- compatible: "nvidia,tegra<chip>-mipi"
+- reg: Physical base address and length of the controller's registers.
+- clocks: Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+ - mipi-cal
+- #nvidia,mipi-calibrate-cells: Should be 1. The cell is a bitmask of the pads
+ that need to be calibrated for a given device.
+
+User nodes need to contain an nvidia,mipi-calibrate property that has a
+phandle to refer to the calibration controller node and a bitmask of the pads
+that need to be calibrated.
+
+Example:
+
+ mipi: mipi@700e3000 {
+ compatible = "nvidia,tegra114-mipi";
+ reg = <0x700e3000 0x100>;
+ clocks = <&tegra_car TEGRA114_CLK_MIPI_CAL>;
+ clock-names = "mipi-cal";
+ #nvidia,mipi-calibrate-cells = <1>;
+ };
+
+ ...
+
+ host1x@50000000 {
+ ...
+
+ dsi@54300000 {
+ ...
+
+ nvidia,mipi-calibrate = <&mipi 0x060>;
+
+ ...
+ };
+
+ ...
+ };
diff --git a/Documentation/devicetree/bindings/panel/auo,b101aw03.txt b/Documentation/devicetree/bindings/panel/auo,b101aw03.txt
new file mode 100644
index 000000000000..72e088a4fb3a
--- /dev/null
+++ b/Documentation/devicetree/bindings/panel/auo,b101aw03.txt
@@ -0,0 +1,7 @@
+AU Optronics Corporation 10.1" WSVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "auo,b101aw03"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/panel/chunghwa,claa101wa01a.txt b/Documentation/devicetree/bindings/panel/chunghwa,claa101wa01a.txt
new file mode 100644
index 000000000000..f24614e4d5ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/panel/chunghwa,claa101wa01a.txt
@@ -0,0 +1,7 @@
+Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "chunghwa,claa101wa01a"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/panel/chunghwa,claa101wb03.txt b/Documentation/devicetree/bindings/panel/chunghwa,claa101wb03.txt
new file mode 100644
index 000000000000..0ab2c05a4c22
--- /dev/null
+++ b/Documentation/devicetree/bindings/panel/chunghwa,claa101wb03.txt
@@ -0,0 +1,7 @@
+Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "chunghwa,claa101wb03"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/panel/panasonic,vvx10f004b00.txt b/Documentation/devicetree/bindings/panel/panasonic,vvx10f004b00.txt
new file mode 100644
index 000000000000..d328b0341bf4
--- /dev/null
+++ b/Documentation/devicetree/bindings/panel/panasonic,vvx10f004b00.txt
@@ -0,0 +1,7 @@
+Panasonic Corporation 10.1" WUXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "panasonic,vvx10f004b00"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/panel/samsung,ltn101nt05.txt b/Documentation/devicetree/bindings/panel/samsung,ltn101nt05.txt
new file mode 100644
index 000000000000..ef522c6bb85f
--- /dev/null
+++ b/Documentation/devicetree/bindings/panel/samsung,ltn101nt05.txt
@@ -0,0 +1,7 @@
+Samsung Electronics 10.1" WSVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "samsung,ltn101nt05"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/panel/simple-panel.txt b/Documentation/devicetree/bindings/panel/simple-panel.txt
new file mode 100644
index 000000000000..1341bbf4aa3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/panel/simple-panel.txt
@@ -0,0 +1,21 @@
+Simple display panel
+
+Required properties:
+- power-supply: regulator to provide the supply voltage
+
+Optional properties:
+- ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
+- enable-gpios: GPIO pin to enable or disable the panel
+- backlight: phandle of the backlight device attached to the panel
+
+Example:
+
+ panel: panel {
+ compatible = "cptt,claa101wb01";
+ ddc-i2c-bus = <&panelddc>;
+
+ power-supply = <&vdd_pnl_reg>;
+ enable-gpios = <&gpio 90 0>;
+
+ backlight = <&backlight>;
+ };