Merge branch 'linux-3.4.35' into rel-17

Bug 1243631

Change-Id: I915826047b2e20f0ad0a7d75df295c6cbf6e5b0a

8 files changed, 18 insertions, 8 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-rbd b/Documentation/ABI/testing/sysfs-bus-rbd
index dbedafb095e2..eb781c624a78 100644
--- a/Documentation/ABI/testing/sysfs-bus-rbd
+++ b/Documentation/ABI/testing/sysfs-bus-rbd
@@ -51,12 +51,6 @@ current_snap
 
 	The current snapshot for which the device is mapped.
 
-create_snap
-
-	Create a snapshot:
-
-	 $ echo <snap-name> > /sys/bus/rbd/devices/<dev-id>/snap_create
-
 snap_*
 
 	A directory per each snapshot
diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt
index 9b1067afb224..68c5411d70a2 100644
--- a/Documentation/cgroups/memory.txt
+++ b/Documentation/cgroups/memory.txt
@@ -466,6 +466,10 @@ Note:
 5.3 swappiness
 
 Similar to /proc/sys/vm/swappiness, but affecting a hierarchy of groups only.
+Please note that unlike the global swappiness, memcg knob set to 0
+really prevents from any swapping even if there is a swap storage
+available. This might lead to memcg OOM killer if there are no file
+pages to reclaim.
 
 Following cgroups' swappiness can't be changed.
 - root cgroup (uses /proc/sys/vm/swappiness).
diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt
index ecc81e368715..d187e9f7cf1c 100644
--- a/Documentation/devicetree/bindings/arm/atmel-at91.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt
@@ -8,7 +8,7 @@ PIT Timer required properties:
   shared across all System Controller members.
 
 TC/TCLIB Timer required properties:
-- compatible: Should be "atmel,<chip>-pit".
+- compatible: Should be "atmel,<chip>-tcb".
   <chip> can be "at91rm9200" or "at91sam9x5"
 - reg: Should contain registers location and length
 - interrupts: Should contain all interrupts for the TC block
diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware
index d1d4a179a382..b361e08570f7 100755
--- a/Documentation/dvb/get_dvb_firmware
+++ b/Documentation/dvb/get_dvb_firmware
@@ -115,7 +115,7 @@ sub tda10045 {
 
 sub tda10046 {
 	my $sourcefile = "TT_PCI_2.19h_28_11_2006.zip";
-	my $url = "http://www.tt-download.com/download/updates/219/$sourcefile";
+	my $url = "http://technotrend.com.ua/download/software/219/$sourcefile";
 	my $hash = "6a7e1e2f2644b162ff0502367553c72d";
 	my $outfile = "dvb-fe-tda10046.fw";
 	my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
index 71f55bbcefc8..99d4e442b77d 100644
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -21,6 +21,7 @@ Supported adapters:
   * Intel DH89xxCC (PCH)
   * Intel Panther Point (PCH)
   * Intel Lynx Point (PCH)
+  * Intel Lynx Point-LP (PCH)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 22ce1007b775..c0d908c1d1bc 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -566,6 +566,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			UART at the specified I/O port or MMIO address,
 			switching to the matching ttyS device later.  The
 			options are the same as for ttyS, above.
+		hvc<n>	Use the hypervisor console device <n>. This is for
+			both Xen and PowerPC hypervisors.
 
                 If the device connected to the port is not a TTY but a braille
                 device, prepend "brl," before the device type, for instance
@@ -751,6 +753,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 	earlyprintk=	[X86,SH,BLACKFIN]
 			earlyprintk=vga
+			earlyprintk=xen
 			earlyprintk=serial[,ttySn[,baudrate]]
 			earlyprintk=ttySn[,baudrate]
 			earlyprintk=dbgp[debugController#]
@@ -768,6 +771,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			The VGA output is eventually overwritten by the real
 			console.
 
+			The xen output can only be used by Xen PV guests.
+
 	ekgdboc=	[X86,KGDB] Allow early kernel console debugging
 			ekgdboc=kbd
 
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index 1619a8c80873..797715397f43 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -537,6 +537,11 @@ tcp_thin_dupack - BOOLEAN
 	Documentation/networking/tcp-thin.txt
 	Default: 0
 
+tcp_challenge_ack_limit - INTEGER
+	Limits number of Challenge ACK sent per second, as recommended
+	in RFC 5961 (Improving TCP's Robustness to Blind In-Window Attacks)
+	Default: 100
+
 UDP variables:
 
 udp_mem - vector of 3 INTEGERs: min, pressure, max
diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index 286ec04d1383..82dd174396d1 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -47,6 +47,7 @@ ALC882/883/885/888/889
   acer-aspire-4930g	Acer Aspire 4930G/5930G/6530G/6930G/7730G
   acer-aspire-8930g	Acer Aspire 8330G/6935G
   acer-aspire		Acer Aspire others
+  no-primary-hp		VAIO Z workaround (for fixed speaker DAC)
 
 ALC861/660
 ==========