summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/aks-cdu.dts
diff options
context:
space:
mode:
authorJiri Prchal <jiri.prchal@aksignal.cz>2012-07-09 10:05:18 +0200
committerNicolas Ferre <nicolas.ferre@atmel.com>2012-07-09 20:45:31 +0200
commit3c68bb48214f87562b6956195178d991403d66d4 (patch)
treeac794b9a18d6d49935b6f56688f58558d0474674 /arch/arm/boot/dts/aks-cdu.dts
parent2e8e4711fed439fc5642e80ee5797d285c11c7d3 (diff)
ARM: at91: Add support for board aks-cdu
Add support for our "aks-cdu" board based up on Telit's module GE863 Pro3. It has more uarts, leds, another nand partitioning. Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz> [nicolas.ferre@atmel.com: correction of the dts file] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Diffstat (limited to 'arch/arm/boot/dts/aks-cdu.dts')
-rw-r--r--arch/arm/boot/dts/aks-cdu.dts113
1 files changed, 113 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/aks-cdu.dts b/arch/arm/boot/dts/aks-cdu.dts
new file mode 100644
index 000000000000..29b9f15e7599
--- /dev/null
+++ b/arch/arm/boot/dts/aks-cdu.dts
@@ -0,0 +1,113 @@
+/*
+ * aks-cdu.dts - Device Tree file for AK signal CDU
+ *
+ * Copyright (C) 2012 AK signal Brno a.s.
+ * 2012 Jiri Prchal <jiri.prchal@aksignal.cz>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/dts-v1/;
+
+/include/ "ge863-pro3.dtsi"
+
+/ {
+ chosen {
+ bootargs = "console=ttyS0,115200 ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs";
+ };
+
+ ahb {
+ apb {
+ usart0: serial@fffb0000 {
+ status = "okay";
+ };
+
+ usart1: serial@fffb4000 {
+ status = "okay";
+ linux,rs485-enabled-at-boot-time;
+ rs485-rts-delay = <0 0>;
+ };
+
+ usart2: serial@fffb8000 {
+ status = "okay";
+ linux,rs485-enabled-at-boot-time;
+ rs485-rts-delay = <0 0>;
+ };
+
+ usart3: serial@fffd0000 {
+ status = "okay";
+ linux,rs485-enabled-at-boot-time;
+ rs485-rts-delay = <0 0>;
+ };
+
+ macb0: ethernet@fffc4000 {
+ phy-mode = "rmii";
+ status = "okay";
+ };
+
+ usb1: gadget@fffa4000 {
+ atmel,vbus-gpio = <&pioC 15 0>;
+ status = "okay";
+ };
+ };
+
+ usb0: ohci@00500000 {
+ num-ports = <2>;
+ status = "okay";
+ };
+
+ nand0: nand@40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "soft";
+ nand-on-flash-bbt;
+ status = "okay";
+
+ bootstrap@0 {
+ label = "bootstrap";
+ reg = <0x0 0x40000>;
+ };
+
+ uboot@40000 {
+ label = "uboot";
+ reg = <0x40000 0x80000>;
+ };
+ ubootenv@c0000 {
+ label = "ubootenv";
+ reg = <0xc0000 0x40000>;
+ };
+ kernel@100000 {
+ label = "kernel";
+ reg = <0x100000 0x400000>;
+ };
+ rootfs@500000 {
+ label = "rootfs";
+ reg = <0x500000 0x7b00000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ red {
+ gpios = <&pioC 10 0>;
+ linux,default-trigger = "none";
+ };
+
+ green {
+ gpios = <&pioA 5 1>;
+ linux,default-trigger = "none";
+ default-state = "on";
+ };
+
+ yellow {
+ gpios = <&pioB 20 1>;
+ linux,default-trigger = "none";
+ };
+
+ blue {
+ gpios = <&pioB 21 1>;
+ linux,default-trigger = "none";
+ };
+ };
+};