diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2015-01-18 18:00:40 +1200 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2015-01-18 18:00:40 +1200 |
commit | d0ac5d8e673aa7317c0d132ba3092935dac53298 (patch) | |
tree | 458afa365611acc689c63be1d7c6a7ac64c10d92 /arch/arm/boot/dts/berlin2q.dtsi | |
parent | 12ba8571ab6b232f5facef6b1dd28c5ebc2b530a (diff) | |
parent | 966903a98fd80ae5f5c4a7ca121d36ea0ba23143 (diff) |
Merge tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"We've been sitting on our fixes branch for a while, so this batch is
unfortunately on the large side.
A lot of these are tweaks and fixes to device trees, fixing various
bugs around clocks, reg ranges, etc. There's also a few defconfig
updates (which are on the late side, no more of those).
All in all the diffstat is bigger than ideal at this time, but nothing
in here seems particularly risky"
* tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits)
reset: sunxi: fix spinlock initialization
ARM: dts: disable CCI on exynos5420 based arndale-octa
drivers: bus: check cci device tree node status
ARM: rockchip: disable jtag/sdmmc autoswitching on rk3288
ARM: nomadik: fix up leftover device tree pins
ARM: at91: board-dt-sama5: add phy_fixup to override NAND_Tree
ARM: at91/dt: sam9263: Add missing clocks to lcdc node
ARM: at91: sama5d3: dt: correct the sound route
ARM: at91/dt: sama5d4: fix the timer reg length
ARM: exynos_defconfig: Enable LM90 driver
ARM: exynos_defconfig: Enable options for display panel support
arm: dts: Use pmu_system_controller phandle for dp phy
ARM: shmobile: sh73a0 legacy: Set .control_parent for all irqpin instances
ARM: dts: berlin: correct BG2Q's SM GPIO location.
ARM: dts: berlin: add broken-cd and set bus width for eMMC in Marvell DMP DT
ARM: dts: berlin: fix io clk and add missing core clk for BG2Q sdhci2 host
ARM: dts: Revert disabling of smc91x for n900
ARM: dts: imx51-babbage: Fix ULPI PHY reset modelling
ARM: dts: dra7-evm: fix qspi device tree partition size
ARM: omap2plus_defconfig: use CONFIG_CPUFREQ_DT
...
Diffstat (limited to 'arch/arm/boot/dts/berlin2q.dtsi')
-rw-r--r-- | arch/arm/boot/dts/berlin2q.dtsi | 63 |
1 files changed, 32 insertions, 31 deletions
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index 35253c947a7c..e2f61f27944e 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -83,7 +83,8 @@ compatible = "mrvl,pxav3-mmc"; reg = <0xab1000 0x200>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&chip CLKID_SDIO1XIN>; + clocks = <&chip CLKID_NFC_ECC>, <&chip CLKID_NFC>; + clock-names = "io", "core"; status = "disabled"; }; @@ -348,36 +349,6 @@ interrupt-parent = <&gic>; interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; }; - - gpio4: gpio@5000 { - compatible = "snps,dw-apb-gpio"; - reg = <0x5000 0x400>; - #address-cells = <1>; - #size-cells = <0>; - - porte: gpio-port@4 { - compatible = "snps,dw-apb-gpio-port"; - gpio-controller; - #gpio-cells = <2>; - snps,nr-gpios = <32>; - reg = <0>; - }; - }; - - gpio5: gpio@c000 { - compatible = "snps,dw-apb-gpio"; - reg = <0xc000 0x400>; - #address-cells = <1>; - #size-cells = <0>; - - portf: gpio-port@5 { - compatible = "snps,dw-apb-gpio-port"; - gpio-controller; - #gpio-cells = <2>; - snps,nr-gpios = <32>; - reg = <0>; - }; - }; }; chip: chip-control@ea0000 { @@ -466,6 +437,21 @@ ranges = <0 0xfc0000 0x10000>; interrupt-parent = <&sic>; + sm_gpio1: gpio@5000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x5000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portf: gpio-port@5 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + }; + }; + i2c2: i2c@7000 { compatible = "snps,designware-i2c"; #address-cells = <1>; @@ -516,6 +502,21 @@ status = "disabled"; }; + sm_gpio0: gpio@c000 { + compatible = "snps,dw-apb-gpio"; + reg = <0xc000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + porte: gpio-port@4 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + }; + }; + sysctrl: pin-controller@d000 { compatible = "marvell,berlin2q-system-ctrl"; reg = <0xd000 0x100>; |