diff options
| author | Lothar Waßmann <LW@KARO-electronics.de> | 2013-09-19 08:59:48 +0200 |
|---|---|---|
| committer | Shawn Guo <shawn.guo@linaro.org> | 2013-09-26 13:01:36 +0800 |
| commit | bc3875f1a61e30dc56b00ffbd55daabce271e2ee (patch) | |
| tree | 178809cf8235854c22018bf4cb753494b9c3fde8 /arch/arm/boot/dts/imx28-cfa10037.dts | |
| parent | ff04b40152d04260f04664cecae4194f4c6d399d (diff) | |
ARM: dts: mxs: modify mx23/mx28 dts files to use pinctrl headers
Convert mx23/mx28 dts filed to use the pinctrl header files.
NOTE: During automatic conversion of these files to use the pinconfig
definitions an inconsistency has been found in:
arch/arm/boot/dts/imx28-apx4devkit.dts
According to the comment the function for pad SSP2_SS0 should have
been MX28_PAD_SSP2_SS0__GPIO_2_19, while the given value 0x2131
represents: MX28_PAD_SSP2_SS0__AUART3_TX
I used the later (though probably wrong) definition because that's
what is actually being used in the DTB.
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Diffstat (limited to 'arch/arm/boot/dts/imx28-cfa10037.dts')
| -rw-r--r-- | arch/arm/boot/dts/imx28-cfa10037.dts | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/arch/arm/boot/dts/imx28-cfa10037.dts b/arch/arm/boot/dts/imx28-cfa10037.dts index 182b99fe35f3..42a9a99880af 100644 --- a/arch/arm/boot/dts/imx28-cfa10037.dts +++ b/arch/arm/boot/dts/imx28-cfa10037.dts @@ -13,7 +13,7 @@ * The CFA-10049 is an expansion board for the CFA-10036 module, thus we * need to include the CFA-10036 DTS. */ -/include/ "imx28-cfa10036.dts" +#include "imx28-cfa10036.dts" / { model = "Crystalfontz CFA-10037 Board"; @@ -25,7 +25,7 @@ usb_pins_cfa10037: usb-10037@0 { reg = <0>; fsl,pinmux-ids = < - 0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */ + MX28_PAD_GPMI_D07__GPIO_0_7 >; fsl,drive-strength = <0>; fsl,voltage = <1>; @@ -35,7 +35,7 @@ mac0_pins_cfa10037: mac0-10037@0 { reg = <0>; fsl,pinmux-ids = < - 0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */ + MX28_PAD_SSP2_SS2__GPIO_2_21 >; fsl,drive-strength = <0>; fsl,voltage = <1>; |