summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/imx28-m28evk.dts
diff options
context:
space:
mode:
authorMarek Vasut <marex@denx.de>2012-08-26 14:59:31 +0200
committerShawn Guo <shawn.guo@linaro.org>2012-08-28 04:45:11 +0800
commit91ed4938ced262e3356a377b08e1f367da941a85 (patch)
tree5bf544c5e3eea3a4ad97b44c15c01c28ce510712 /arch/arm/boot/dts/imx28-m28evk.dts
parentbb2f1261c2ededd168d774e84e456bdad25ffdbf (diff)
ARM: mxs: Update DENX M28 machine and dts file
Update the mach-mxs machine by removing the enet_clkout(). The new revision of the board doesn't need that. Also, update the DTS file with all the new drivers pulled in the mainline recently, that is, SPI, LRADC, USB. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Diffstat (limited to 'arch/arm/boot/dts/imx28-m28evk.dts')
-rw-r--r--arch/arm/boot/dts/imx28-m28evk.dts79
1 files changed, 73 insertions, 6 deletions
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
index ac3eff96a70c..8118b64362b6 100644
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -23,6 +23,8 @@
apb@80000000 {
apbh@80000000 {
gpmi-nand@8000c000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
pinctrl-names = "default";
pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
status = "okay";
@@ -62,9 +64,27 @@
&mmc0_sck_cfg>;
bus-width = <8>;
wp-gpios = <&gpio3 10 1>;
+ vmmc-supply = <&reg_vddio_sd0>;
status = "okay";
};
+ ssp2: ssp@80014000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx28-spi";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_pins_a>;
+ status = "okay";
+
+ flash: m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "m25p80";
+ spi-max-frequency = <40000000>;
+ reg = <0>;
+ };
+ };
+
pinctrl@80018000 {
pinctrl-names = "default";
pinctrl-0 = <&hog_pins_a>;
@@ -72,8 +92,11 @@
hog_pins_a: hog@0 {
reg = <0>;
fsl,pinmux-ids = <
+ 0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
0x30a3 /* MX28_PAD_AUART2_CTS__GPIO_3_10 */
0x30b3 /* MX28_PAD_AUART2_RTS__GPIO_3_11 */
+ 0x30c3 /* MX28_PAD_AUART3_RX__GPIO_3_12 */
+ 0x30d3 /* MX28_PAD_AUART3_TX__GPIO_3_13 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
@@ -129,6 +152,7 @@
i2c0: i2c@80058000 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
+ clock-frequency = <400000>;
status = "okay";
sgtl5000: codec@0a {
@@ -151,32 +175,51 @@
};
};
+ lradc@80050000 {
+ status = "okay";
+ };
+
duart: serial@80074000 {
pinctrl-names = "default";
pinctrl-0 = <&duart_pins_a>;
status = "okay";
};
- auart0: serial@8006a000 {
- pinctrl-names = "default";
- pinctrl-0 = <&auart0_2pins_a>;
+ usbphy0: usbphy@8007c000 {
status = "okay";
};
- auart3: serial@80070000 {
+ usbphy1: usbphy@8007e000 {
+ status = "okay";
+ };
+
+ auart0: serial@8006a000 {
pinctrl-names = "default";
- pinctrl-0 = <&auart3_pins_a>;
+ pinctrl-0 = <&auart0_2pins_a>;
status = "okay";
};
};
};
ahb@80080000 {
+ usb0: usb@80080000 {
+ vbus-supply = <&reg_usb0_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usbphy0_pins_a>;
+ status = "okay";
+ };
+
+ usb1: usb@80090000 {
+ vbus-supply = <&reg_usb1_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usbphy1_pins_a>;
+ status = "okay";
+ };
+
mac0: ethernet@800f0000 {
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&mac0_pins_a>;
- phy-reset-gpios = <&gpio3 11 0>;
status = "okay";
};
@@ -198,6 +241,30 @@
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
+
+ reg_vddio_sd0: vddio-sd0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vddio-sd0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 28 0>;
+ };
+
+ reg_usb0_vbus: usb0_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb0_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 12 0>;
+ };
+
+ reg_usb1_vbus: usb1_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 13 0>;
+ };
};
sound {