diff options
author | Stefan Agner <stefan.agner@toradex.com> | 2016-06-03 18:31:48 -0700 |
---|---|---|
committer | Marcel Ziswiler <marcel.ziswiler@toradex.com> | 2017-01-10 23:09:50 +0100 |
commit | bf37100e154e248fbbb0cf6f2f4bcd75e98bf302 (patch) | |
tree | 8ace9aafb65531765e2675cfcd1ace5ddb8ba834 /arch/arm/boot/dts/imx7-colibri.dtsi | |
parent | c4933f18783b47bf1842a228da0c105d0dff74f0 (diff) |
ARM: dts: imx7-colibri: introduce carrier board level dts
Split up the colibri device tree into two device tree files for
COM and Carrier Board. Use the usual SoC/COM/Board tripplet and
follow including scheme used for Vybrid.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
(cherry picked from commit ac23876a1c36a702019c44f299195afa7b875393)
Diffstat (limited to 'arch/arm/boot/dts/imx7-colibri.dtsi')
-rw-r--r-- | arch/arm/boot/dts/imx7-colibri.dtsi | 180 |
1 files changed, 1 insertions, 179 deletions
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi index 03547b63024e..813b5983edfc 100644 --- a/arch/arm/boot/dts/imx7-colibri.dtsi +++ b/arch/arm/boot/dts/imx7-colibri.dtsi @@ -11,12 +11,9 @@ /* #define USE_ENET_OUT */ / { - backlight { + bl: backlight { compatible = "pwm-backlight"; pwms = <&pwm1 0 5000000>; - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <6>; - status = "okay"; }; pxp_v4l2_out { @@ -93,36 +90,22 @@ &adc1 { vref-supply = <®_vref_1v8>; - status = "okay"; }; &adc2 { vref-supply = <®_vref_1v8>; - status = "okay"; }; &cpu0 { arm-supply = <®_DCDC2>; }; -&epxp { - status = "okay"; -}; - /* Colibri SPI */ &ecspi3 { fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio4 11 0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs>; - - status = "okay"; - - spidev0: spidev@1 { - compatible = "spidev"; - reg = <0>; - spi-max-frequency = <50000000>; - }; }; &fec1 { @@ -149,7 +132,6 @@ phy-handle = <ðphy>; phy-supply = <®_LDO1>; fsl,magic-packet; - status = "okay"; mdio { #address-cells = <1>; @@ -282,13 +264,6 @@ clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c4>; - status = "okay"; - - /* M41T0M6 real time clock on carrier board */ - rtc: m41t0m6@68 { - compatible = "st,m41t00"; - reg = <0x68>; - }; }; &lcdif { @@ -296,123 +271,6 @@ pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>; //pinctrl-assert-gpios = <&gpio_spi 7 GPIO_ACTIVE_HIGH>; - display = <&display0>; - status = "okay"; - - display0: display { - bits-per-pixel = <16>; - bus-width = <18>; - - display-timings { -/* not working, it takes the last element currently - native-mode = <&timing_vga>; -*/ - /* Standard VGA timing */ - timing_vga: 640x480 { - clock-frequency = <25175000>; - hactive = <640>; - vactive = <480>; - hback-porch = <40>; - hfront-porch = <24>; - vback-porch = <32>; - vfront-porch = <11>; - hsync-len = <96>; - vsync-len = <2>; - - de-active = <1>; - hsync-active = <0>; - vsync-active = <0>; - pixelclk-active = <0>; - }; -#if 0 - /* WVGA Timing, e.g. EDT ET070080DH6 */ - timing_wvga: 800x480 { - clock-frequency = <33260000>; - hactive = <800>; - vactive = <480>; - hback-porch = <216>; - hfront-porch = <40>; - vback-porch = <35>; - vfront-porch = <10>; - hsync-len = <128>; - vsync-len = <2>; - - de-active = <1>; - hsync-active = <0>; - vsync-active = <0>; - pixelclk-active = <0>; - }; - /* WVGA Timing, TouchRevolution Fusion 7" */ - timing_wvga2: 800x480pixclkact { - clock-frequency = <33260000>; - hactive = <800>; - vactive = <480>; - hback-porch = <216>; - hfront-porch = <40>; - vback-porch = <35>; - vfront-porch = <10>; - hsync-len = <128>; - vsync-len = <2>; - - de-active = <1>; - hsync-active = <0>; - vsync-active = <0>; - pixelclk-active = <1>; - }; - /* Standard SVGA timing */ - timing_svga: 800x600 { - clock-frequency = <40000000>; - hactive = <800>; - vactive = <600>; - hback-porch = <88>; - hfront-porch = <40>; - vback-porch = <23>; - vfront-porch = <1>; - hsync-len = <128>; - vsync-len = <4>; - - de-active = <1>; - hsync-active = <1>; - vsync-active = <1>; - pixelclk-active = <0>; - }; - /* TouchRevolution Fusion 10"/CLAA101NC05 10.1 inch */ - timing_wsvga: 1024x600 { - clock-frequency = <48000000>; - hactive = <1024>; - vactive = <600>; - hback-porch = <104>; - hfront-porch = <43>; - vback-porch = <24>; - vfront-porch = <20>; - hsync-len = <5>; - vsync-len = <5>; - - de-active = <1>; - hsync-active = <0>; - vsync-active = <0>; - pixelclk-active = <0>; - }; - /* Standard XGA timing */ - timing_xga: 1024x768 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <160>; - hfront-porch = <24>; - vback-porch = <29>; - vfront-porch = <3>; - hsync-len = <136>; - vsync-len = <6>; - - de-active = <1>; - hsync-active = <0>; - vsync-active = <0>; - pixelclk-active = <0>; - }; -#endif - }; - }; }; &ocram { @@ -426,25 +284,21 @@ &pwm1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; - status = "okay"; }; &pwm2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm2>; - status = "okay"; }; &pwm3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; - status = "okay"; }; &pwm4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; - status = "okay"; }; &iomuxc { @@ -841,7 +695,6 @@ assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; fsl,uart-has-rtscts; fsl,dte-mode; - status = "okay"; }; &uart2 { @@ -851,7 +704,6 @@ assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; fsl,uart-has-rtscts; fsl,dte-mode; - status = "okay"; }; &uart3 { @@ -860,38 +712,8 @@ assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>; assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; fsl,dte-mode; - status = "okay"; }; &usbotg1 { dr_mode = "host"; - status = "okay"; -}; - -/* The define SD_1_8 allows to use the SD interface at a higher speed mode - * if the card supports it. For this the signaling voltage is switched from - * 3.3V to 1.8V under the usdhc1's drivers control. - * All pins supplied with NVCC_SD1 must be able to cope with this - * and must (MUST!!!) not be driven with a voltage higher than 1.8V or - * the interface will not work. - */ -/* #define SD_1_8 */ -&usdhc1 { -#ifdef SD_1_8 - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>; - pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_cd_usdhc1>; - pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_cd_usdhc1>; - vmmc-supply = <®_3p3v>; - vqmmc-supply = <®_LDO2>; -#else - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>; - no-1-8-v; -#endif - cd-gpios = <&gpio1 0 0>; - enable-sdio-wakeup; - keep-power-in-suspend; - status = "okay"; - tuning-step = <2>; }; |