diff options
| author | Max Krummenacher <max.krummenacher@toradex.com> | 2024-02-05 16:35:46 +0100 |
|---|---|---|
| committer | Max Krummenacher <max.krummenacher@toradex.com> | 2024-02-05 16:36:18 +0100 |
| commit | 340d0000d1e277a5ec64e5bd903dab8ed1df1860 (patch) | |
| tree | b785c59256937102b9f0011ef143b1cb40471b48 /arch/arm/boot/dts | |
| parent | 4f79a6f97a8b85a7f887723616825b2427e38059 (diff) | |
| parent | 16e6e107a688046df37976fb6d7310e886c8115d (diff) | |
Merge tag 'v5.4.264' into toradex_5.4.y
This is the 5.4.264 stable release
Conflicts:
drivers/pci/controller/dwc/pci-imx6.c
commit 0f31993721f92 ("PCI: imx6: Install the fault
handler only on compatible match") overlaps with our
not mainlined THUMB work.
Keep both additions
sound/soc/codecs/sgtl5000.c
commit c062676528865 (ASoC: sgtl5000: Reset the
CHIP_CLK_CTRL reg on remove") with a backport of a
"fixes" commit.
Diffstat (limited to 'arch/arm/boot/dts')
96 files changed, 547 insertions, 364 deletions
diff --git a/arch/arm/boot/dts/am335x-pcm-953.dtsi b/arch/arm/boot/dts/am335x-pcm-953.dtsi index 9bfa032bcada..f2d9145b3c6a 100644 --- a/arch/arm/boot/dts/am335x-pcm-953.dtsi +++ b/arch/arm/boot/dts/am335x-pcm-953.dtsi @@ -12,22 +12,20 @@ compatible = "phytec,am335x-pcm-953", "phytec,am335x-phycore-som", "ti,am33xx"; /* Power */ - regulators { - vcc3v3: fixedregulator@1 { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - }; + vcc3v3: fixedregulator1 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; - vcc1v8: fixedregulator@2 { - compatible = "regulator-fixed"; - regulator-name = "vcc1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - }; + vcc1v8: fixedregulator2 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; }; /* User IO */ diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi index 7a9eb2b0d45b..8ec6c4500fd5 100644 --- a/arch/arm/boot/dts/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -1337,8 +1337,7 @@ ti,dual-volt; ti,needs-special-reset; ti,needs-special-hs-handling; - dmas = <&edma_xbar 24 0 0 - &edma_xbar 25 0 0>; + dmas = <&edma 24 0>, <&edma 25 0>; dma-names = "tx", "rx"; interrupts = <64>; reg = <0x0 0x1000>; diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts index e86d4795e024..e542a9f59e93 100644 --- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts +++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts @@ -527,7 +527,7 @@ interrupt-parent = <&gpio1>; interrupts = <31 0>; - pendown-gpio = <&gpio1 31 0>; + pendown-gpio = <&gpio1 31 GPIO_ACTIVE_LOW>; ti,x-min = /bits/ 16 <0x0>; diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 46e6d3ed8f35..c042c416a94a 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -74,7 +74,7 @@ pcie2: pcie@2,0 { device_type = "pci"; - assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; + assigned-addresses = <0x82001000 0 0x80000 0 0x2000>; reg = <0x1000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi index 2932a29ae272..230f6dd876a2 100644 --- a/arch/arm/boot/dts/armada-375.dtsi +++ b/arch/arm/boot/dts/armada-375.dtsi @@ -584,7 +584,7 @@ pcie1: pcie@2,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; + assigned-addresses = <0x82001000 0 0x44000 0 0x2000>; reg = <0x1000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi index cff1269f3fbf..7146cc8f082a 100644 --- a/arch/arm/boot/dts/armada-380.dtsi +++ b/arch/arm/boot/dts/armada-380.dtsi @@ -79,7 +79,7 @@ /* x1 port */ pcie@2,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + assigned-addresses = <0x82001000 0 0x40000 0 0x2000>; reg = <0x1000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -98,7 +98,7 @@ /* x1 port */ pcie@3,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; + assigned-addresses = <0x82001800 0 0x44000 0 0x2000>; reg = <0x1800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts index fde4c302f08e..320c759b4090 100644 --- a/arch/arm/boot/dts/armada-385-turris-omnia.dts +++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts @@ -22,6 +22,12 @@ stdout-path = &uart0; }; + aliases { + ethernet0 = ð0; + ethernet1 = ð1; + ethernet2 = ð2; + }; + memory { device_type = "memory"; reg = <0x00000000 0x40000000>; /* 1024 MB */ @@ -291,7 +297,17 @@ }; }; - /* port 6 is connected to eth0 */ + ports@6 { + reg = <6>; + label = "cpu"; + ethernet = <ð0>; + phy-mode = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; }; }; }; @@ -307,7 +323,7 @@ marvell,function = "spi0"; }; - spi0cs1_pins: spi0cs1-pins { + spi0cs2_pins: spi0cs2-pins { marvell,pins = "mpp26"; marvell,function = "spi0"; }; @@ -342,7 +358,7 @@ }; }; - /* MISO, MOSI, SCLK and CS1 are routed to pin header CN11 */ + /* MISO, MOSI, SCLK and CS2 are routed to pin header CN11 */ }; &uart0 { diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi index f0022d10c715..f081f7cb66e5 100644 --- a/arch/arm/boot/dts/armada-385.dtsi +++ b/arch/arm/boot/dts/armada-385.dtsi @@ -84,7 +84,7 @@ /* x1 port */ pcie2: pcie@2,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + assigned-addresses = <0x82001000 0 0x40000 0 0x2000>; reg = <0x1000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -103,7 +103,7 @@ /* x1 port */ pcie3: pcie@3,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; + assigned-addresses = <0x82001800 0 0x44000 0 0x2000>; reg = <0x1800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -125,7 +125,7 @@ */ pcie4: pcie@4,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; + assigned-addresses = <0x82002000 0 0x48000 0 0x2000>; reg = <0x2000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi index b1b86934c688..cd7a46c48d19 100644 --- a/arch/arm/boot/dts/armada-39x.dtsi +++ b/arch/arm/boot/dts/armada-39x.dtsi @@ -457,7 +457,7 @@ /* x1 port */ pcie@2,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + assigned-addresses = <0x82001000 0 0x40000 0 0x2000>; reg = <0x1000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -476,7 +476,7 @@ /* x1 port */ pcie@3,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; + assigned-addresses = <0x82001800 0 0x44000 0 0x2000>; reg = <0x1800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -498,7 +498,7 @@ */ pcie@4,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; + assigned-addresses = <0x82002000 0 0x48000 0 0x2000>; reg = <0x2000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index 8558bf6bb54c..d55fe162fc7f 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -97,7 +97,7 @@ pcie2: pcie@2,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; + assigned-addresses = <0x82001000 0 0x44000 0 0x2000>; reg = <0x1000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -115,7 +115,7 @@ pcie3: pcie@3,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; + assigned-addresses = <0x82001800 0 0x48000 0 0x2000>; reg = <0x1800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -133,7 +133,7 @@ pcie4: pcie@4,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; + assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>; reg = <0x2000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -151,7 +151,7 @@ pcie5: pcie@5,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; + assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; reg = <0x2800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 2d85fe8ac327..fdcc81819940 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -112,7 +112,7 @@ pcie2: pcie@2,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; + assigned-addresses = <0x82001000 0 0x44000 0 0x2000>; reg = <0x1000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -130,7 +130,7 @@ pcie3: pcie@3,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; + assigned-addresses = <0x82001800 0 0x48000 0 0x2000>; reg = <0x1800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -148,7 +148,7 @@ pcie4: pcie@4,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; + assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>; reg = <0x2000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -166,7 +166,7 @@ pcie5: pcie@5,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; + assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; reg = <0x2800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -184,7 +184,7 @@ pcie6: pcie@6,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x84000 0 0x2000>; + assigned-addresses = <0x82003000 0 0x84000 0 0x2000>; reg = <0x3000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -202,7 +202,7 @@ pcie7: pcie@7,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x88000 0 0x2000>; + assigned-addresses = <0x82003800 0 0x88000 0 0x2000>; reg = <0x3800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -220,7 +220,7 @@ pcie8: pcie@8,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>; + assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>; reg = <0x4000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -238,7 +238,7 @@ pcie9: pcie@9,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; + assigned-addresses = <0x82004800 0 0x42000 0 0x2000>; reg = <0x4800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts index c9d88c90135e..9db4d42d0deb 100644 --- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts +++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts @@ -5,7 +5,7 @@ / { model = "AST2500 EVB"; - compatible = "aspeed,ast2500"; + compatible = "aspeed,ast2500-evb", "aspeed,ast2500"; aliases { serial4 = &uart5; diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts index 9870553919b7..f00b19ad4fa6 100644 --- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts +++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts @@ -7,7 +7,7 @@ / { model = "AST2600 EVB"; - compatible = "aspeed,ast2600"; + compatible = "aspeed,ast2600-evb-a1", "aspeed,ast2600"; aliases { serial4 = &uart5; diff --git a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi index f310f4d3bcc7..ac723fe898c7 100644 --- a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi +++ b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi @@ -117,11 +117,6 @@ groups = "FWSPID"; }; - pinctrl_fwqspid_default: fwqspid_default { - function = "FWSPID"; - groups = "FWQSPID"; - }; - pinctrl_fwspiwp_default: fwspiwp_default { function = "FWSPIWP"; groups = "FWSPIWP"; @@ -653,12 +648,12 @@ }; pinctrl_qspi1_default: qspi1_default { - function = "QSPI1"; + function = "SPI1"; groups = "QSPI1"; }; pinctrl_qspi2_default: qspi2_default { - function = "QSPI2"; + function = "SPI2"; groups = "QSPI2"; }; diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts index c4ef74fea97c..ee90ea09e781 100644 --- a/arch/arm/boot/dts/at91sam9261ek.dts +++ b/arch/arm/boot/dts/at91sam9261ek.dts @@ -156,7 +156,7 @@ compatible = "ti,ads7843"; interrupts-extended = <&pioC 2 IRQ_TYPE_EDGE_BOTH>; spi-max-frequency = <3000000>; - pendown-gpio = <&pioC 2 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&pioC 2 GPIO_ACTIVE_LOW>; ti,x-min = /bits/ 16 <150>; ti,x-max = /bits/ 16 <3830>; diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index 287566e09a67..3d694b60d452 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -38,6 +38,13 @@ }; + usb1 { + pinctrl_usb1_vbus_gpio: usb1_vbus_gpio { + atmel,pins = + <AT91_PIOC 5 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PC5 GPIO */ + }; + }; + mmc0_slot1 { pinctrl_board_mmc0_slot1: mmc0_slot1-board { atmel,pins = @@ -83,6 +90,8 @@ }; usb1: gadget@fffa4000 { + pinctrl-0 = <&pinctrl_usb1_vbus_gpio>; + pinctrl-names = "default"; atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts index 2b69957e0113..1838e0fa0ff5 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts @@ -53,18 +53,17 @@ "GPIO18", "NC", /* GPIO19 */ "NC", /* GPIO20 */ - "GPIO21", + "CAM_GPIO0", "GPIO22", "GPIO23", "GPIO24", "GPIO25", "NC", /* GPIO26 */ - "CAM_GPIO0", - /* Binary number representing build/revision */ - "CONFIG0", - "CONFIG1", - "CONFIG2", - "CONFIG3", + "GPIO27", + "GPIO28", + "GPIO29", + "GPIO30", + "GPIO31", "NC", /* GPIO32 */ "NC", /* GPIO33 */ "NC", /* GPIO34 */ diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts index f65448c01e31..34a85ad9f03c 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts @@ -74,16 +74,18 @@ "GPIO27", "SDA0", "SCL0", - "NC", /* GPIO30 */ - "NC", /* GPIO31 */ - "NC", /* GPIO32 */ - "NC", /* GPIO33 */ - "NC", /* GPIO34 */ - "NC", /* GPIO35 */ - "NC", /* GPIO36 */ - "NC", /* GPIO37 */ - "NC", /* GPIO38 */ - "NC", /* GPIO39 */ + /* Used by BT module */ + "CTS0", + "RTS0", + "TXD0", + "RXD0", + /* Used by Wifi */ + "SD1_CLK", + "SD1_CMD", + "SD1_DATA0", + "SD1_DATA1", + "SD1_DATA2", + "SD1_DATA3", "CAM_GPIO1", /* GPIO40 */ "WL_ON", /* GPIO41 */ "NC", /* GPIO42 */ diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts index 74ed6d047807..d9f63fc59f16 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts @@ -43,7 +43,7 @@ #gpio-cells = <2>; gpio-line-names = "BT_ON", "WL_ON", - "STATUS_LED_R", + "PWR_LED_R", "LAN_RUN", "", "CAM_GPIO0", diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts b/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts index 588d9411ceb6..3dfce4312dfc 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts @@ -63,8 +63,8 @@ "GPIO43", "GPIO44", "GPIO45", - "GPIO46", - "GPIO47", + "SMPS_SCL", + "SMPS_SDA", /* Used by eMMC */ "SD_CLK_R", "SD_CMD_R", diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts index cd797b4202ad..01c48faabfad 100644 --- a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts +++ b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts @@ -19,7 +19,8 @@ memory@0 { device_type = "memory"; - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; }; gpio-keys { diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts index 57ca1cfaecd8..5901160919dc 100644 --- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts +++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts @@ -26,7 +26,6 @@ wlan { label = "bcm53xx:blue:wlan"; gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; system { @@ -46,3 +45,16 @@ }; }; }; + +&gmac0 { + phy-mode = "rgmii"; + phy-handle = <&bcm54210e>; + + mdio { + /delete-node/ switch@1e; + + bcm54210e: ethernet-phy@0 { + reg = <0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts index 2e1a7e382cb7..8e7483272d47 100644 --- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts +++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts @@ -26,7 +26,6 @@ 5ghz { label = "bcm53xx:blue:5ghz"; gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; system { @@ -42,7 +41,6 @@ 2ghz { label = "bcm53xx:blue:2ghz"; gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; }; @@ -83,3 +81,16 @@ }; }; }; + +&gmac0 { + phy-mode = "rgmii"; + phy-handle = <&bcm54210e>; + + mdio { + /delete-node/ switch@1e; + + bcm54210e: ethernet-phy@0 { + reg = <0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 05d67f976911..bf8154aa203a 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -511,7 +511,6 @@ "spi_lr_session_done", "spi_lr_overread"; clocks = <&iprocmed>; - clock-names = "iprocmed"; num-cs = <2>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi index 4af8e3293cff..34bd72b5c9cd 100644 --- a/arch/arm/boot/dts/bcm53573.dtsi +++ b/arch/arm/boot/dts/bcm53573.dtsi @@ -127,6 +127,9 @@ pcie0: pcie@2000 { reg = <0x00002000 0x1000>; + + #address-cells = <3>; + #size-cells = <2>; }; usb2: usb2@4000 { diff --git a/arch/arm/boot/dts/bcm947189acdbmr.dts b/arch/arm/boot/dts/bcm947189acdbmr.dts index b0b8c774a37f..1f0be30e5443 100644 --- a/arch/arm/boot/dts/bcm947189acdbmr.dts +++ b/arch/arm/boot/dts/bcm947189acdbmr.dts @@ -60,9 +60,9 @@ spi { compatible = "spi-gpio"; num-chipselects = <1>; - gpio-sck = <&chipcommon 21 0>; - gpio-miso = <&chipcommon 22 0>; - gpio-mosi = <&chipcommon 23 0>; + sck-gpios = <&chipcommon 21 0>; + miso-gpios = <&chipcommon 22 0>; + mosi-gpios = <&chipcommon 23 0>; cs-gpios = <&chipcommon 24 0>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 2e8a3977219f..347624ea96cd 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -129,7 +129,7 @@ pcie1: pcie@2 { device_type = "pci"; status = "disabled"; - assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; + assigned-addresses = <0x82001000 0 0x80000 0 0x2000>; reg = <0x1000 0 0 0 0>; clocks = <&gate_clk 5>; marvell,pcie-port = <1>; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index 468932f45289..72d6b7c27151 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -239,7 +239,7 @@ i80-if-timings { cs-setup = <0>; wr-setup = <0>; - wr-act = <1>; + wr-active = <1>; wr-hold = <0>; }; }; diff --git a/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi b/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi index 021d9fc1b492..27a1a8952665 100644 --- a/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi +++ b/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi @@ -10,7 +10,7 @@ / { thermal-zones { cpu_thermal: cpu-thermal { - thermal-sensors = <&tmu 0>; + thermal-sensors = <&tmu>; polling-delay-passive = <0>; polling-delay = <0>; trips { diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 433f109d97ca..1dd009c4dc91 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -605,7 +605,7 @@ status = "disabled"; hdmi_i2c_phy: hdmiphy@38 { - compatible = "exynos4210-hdmiphy"; + compatible = "samsung,exynos4210-hdmiphy"; reg = <0x38>; }; }; diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts index f6d0a5f5d339..9a2a49420d4d 100644 --- a/arch/arm/boot/dts/exynos4412-itop-elite.dts +++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts @@ -179,7 +179,7 @@ compatible = "wlf,wm8960"; reg = <0x1a>; clocks = <&pmu_system_controller 0>; - clock-names = "MCLK1"; + clock-names = "mclk"; wlf,shared-lrclk; #sound-dai-cells = <0>; }; diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi index fedb21377c66..3538739c7901 100644 --- a/arch/arm/boot/dts/exynos4412-midas.dtsi +++ b/arch/arm/boot/dts/exynos4412-midas.dtsi @@ -534,7 +534,7 @@ clocks = <&camera 1>; clock-names = "extclk"; samsung,camclk-out = <1>; - gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>; + gpios = <&gpm1 6 GPIO_ACTIVE_LOW>; port { is_s5k6a3_ep: endpoint { diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index ecd14b283a6b..c6678c120cbd 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -86,7 +86,7 @@ }; &ehci { - samsung,vbus-gpio = <&gpx3 5 1>; + samsung,vbus-gpio = <&gpx3 5 GPIO_ACTIVE_HIGH>; status = "okay"; phys = <&exynos_usbphy 2>, <&exynos_usbphy 3>; phy-names = "hsic0", "hsic1"; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index fa5dd992e327..c7e350ea03fe 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -128,7 +128,7 @@ samsung,i2c-max-bus-freq = <20000>; eeprom@50 { - compatible = "samsung,s524ad0xd1"; + compatible = "samsung,s524ad0xd1", "atmel,24c128"; reg = <0x50>; }; @@ -287,7 +287,7 @@ samsung,i2c-max-bus-freq = <20000>; eeprom@51 { - compatible = "samsung,s524ad0xd1"; + compatible = "samsung,s524ad0xd1", "atmel,24c128"; reg = <0x51>; }; diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts index f68baaf58f9e..51b1a7f19471 100644 --- a/arch/arm/boot/dts/exynos5410-odroidxu.dts +++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts @@ -116,7 +116,6 @@ }; &cpu0_thermal { - thermal-sensors = <&tmu_cpu0 0>; polling-delay-passive = <0>; polling-delay = <0>; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 7d51e0f4ab79..5da434ccf12a 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -539,7 +539,7 @@ }; mipi_phy: mipi-video-phy { - compatible = "samsung,s5pv210-mipi-video-phy"; + compatible = "samsung,exynos5420-mipi-video-phy"; syscon = <&pmu_system_controller>; #phy-cells = <1>; }; diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 8257630f7a49..42700d7f8bf7 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -59,7 +59,7 @@ reg = <0x80000000 0x2000>; }; - dma_apbh: dma-apbh@80004000 { + dma_apbh: dma-controller@80004000 { compatible = "fsl,imx23-dma-apbh"; reg = <0x80004000 0x2000>; interrupts = <0 14 20 0 diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index e14d8ef0158b..235c69bd181f 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -78,7 +78,7 @@ status = "disabled"; }; - dma_apbh: dma-apbh@80004000 { + dma_apbh: dma-controller@80004000 { compatible = "fsl,imx28-dma-apbh"; reg = <0x80004000 0x2000>; interrupts = <82 83 84 85 diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index 9cbdc1a15cda..d326b18333d1 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -59,7 +59,7 @@ interrupt-parent = <&avic>; ranges; - L2: l2-cache@30000000 { + L2: cache-controller@30000000 { compatible = "arm,l210-cache"; reg = <0x30000000 0x1000>; cache-unified; diff --git a/arch/arm/boot/dts/imx53-ppd.dts b/arch/arm/boot/dts/imx53-ppd.dts index c80d1700e094..c01dc571b55c 100644 --- a/arch/arm/boot/dts/imx53-ppd.dts +++ b/arch/arm/boot/dts/imx53-ppd.dts @@ -461,7 +461,7 @@ scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; status = "okay"; - i2c-switch@70 { + i2c-mux@70 { compatible = "nxp,pca9547"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index 2ed10310a7b7..4bde98033ff4 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -81,6 +81,9 @@ ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x20000>; + ranges = <0 0x00900000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; clocks = <&clks IMX6QDL_CLK_OCRAM>; }; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index d038f4117024..013080e709f8 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -158,6 +158,9 @@ ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x40000>; + ranges = <0 0x00900000 0x40000>; + #address-cells = <1>; + #size-cells = <1>; clocks = <&clks IMX6QDL_CLK_OCRAM>; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi index e8e36dfd0a6b..c951834f4984 100644 --- a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi @@ -464,7 +464,6 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - uart-has-rtscts; rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi index eea317b41020..5e454a694b78 100644 --- a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi @@ -51,16 +51,6 @@ vin-supply = <®_3p3v_s5>; }; - reg_3p3v_s0: regulator-3p3v-s0 { - compatible = "regulator-fixed"; - regulator-name = "V_3V3_S0"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <®_3p3v_s5>; - }; - reg_3p3v_s5: regulator-3p3v-s5 { compatible = "regulator-fixed"; regulator-name = "V_3V3_S5"; diff --git a/arch/arm/boot/dts/imx6qdl-ts7970.dtsi b/arch/arm/boot/dts/imx6qdl-ts7970.dtsi index f0be516dc28e..9181fbeb833d 100644 --- a/arch/arm/boot/dts/imx6qdl-ts7970.dtsi +++ b/arch/arm/boot/dts/imx6qdl-ts7970.dtsi @@ -226,7 +226,7 @@ reg = <0x28>; #gpio-cells = <2>; gpio-controller; - ngpio = <32>; + ngpios = <62>; }; sgtl5000: codec@a { diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index bc488df31511..0150b2d5c534 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -45,6 +45,10 @@ spi1 = &ecspi2; spi2 = &ecspi3; spi3 = &ecspi4; + usb0 = &usbotg; + usb1 = &usbh1; + usb2 = &usbh2; + usb3 = &usbh3; usbphy0 = &usbphy1; usbphy1 = &usbphy2; }; @@ -156,7 +160,7 @@ interrupt-parent = <&gpc>; ranges; - dma_apbh: dma-apbh@110000 { + dma_apbh: dma-controller@110000 { compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh"; reg = <0x00110000 0x2000>; interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>, @@ -255,7 +259,7 @@ interrupt-parent = <&intc>; }; - L2: l2-cache@a02000 { + L2: cache-controller@a02000 { compatible = "arm,pl310-cache"; reg = <0x00a02000 0x1000>; interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>; @@ -574,7 +578,7 @@ status = "disabled"; }; - gpt: gpt@2098000 { + gpt: timer@2098000 { compatible = "fsl,imx6q-gpt", "fsl,imx31-gpt"; reg = <0x02098000 0x4000>; interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>; @@ -766,7 +770,7 @@ regulator-name = "vddpu"; regulator-min-microvolt = <725000>; regulator-max-microvolt = <1450000>; - regulator-enable-ramp-delay = <150>; + regulator-enable-ramp-delay = <380>; anatop-reg-offset = <0x140>; anatop-vol-bit-shift = <9>; anatop-vol-bit-width = <5>; diff --git a/arch/arm/boot/dts/imx6qp.dtsi b/arch/arm/boot/dts/imx6qp.dtsi index d91f92f944c5..3633383db706 100644 --- a/arch/arm/boot/dts/imx6qp.dtsi +++ b/arch/arm/boot/dts/imx6qp.dtsi @@ -9,12 +9,18 @@ ocram2: sram@940000 { compatible = "mmio-sram"; reg = <0x00940000 0x20000>; + ranges = <0 0x00940000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; clocks = <&clks IMX6QDL_CLK_OCRAM>; }; ocram3: sram@960000 { compatible = "mmio-sram"; reg = <0x00960000 0x20000>; + ranges = <0 0x00960000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; clocks = <&clks IMX6QDL_CLK_OCRAM>; }; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 540880f0413f..fbbae0004e62 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -39,6 +39,9 @@ spi1 = &ecspi2; spi2 = &ecspi3; spi3 = &ecspi4; + usb0 = &usbotg1; + usb1 = &usbotg2; + usb2 = &usbh; usbphy0 = &usbphy1; usbphy1 = &usbphy2; }; @@ -121,6 +124,9 @@ ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x20000>; + ranges = <0 0x00900000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; clocks = <&clks IMX6SL_CLK_OCRAM>; }; @@ -133,7 +139,7 @@ interrupt-parent = <&intc>; }; - L2: l2-cache@a02000 { + L2: cache-controller@a02000 { compatible = "arm,pl310-cache"; reg = <0x00a02000 0x1000>; interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>; @@ -380,7 +386,7 @@ clock-names = "ipg", "per"; }; - gpt: gpt@2098000 { + gpt: timer@2098000 { compatible = "fsl,imx6sl-gpt"; reg = <0x02098000 0x4000>; interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi index 13c7ba7fa6bc..ad3deb82a50a 100644 --- a/arch/arm/boot/dts/imx6sll.dtsi +++ b/arch/arm/boot/dts/imx6sll.dtsi @@ -36,6 +36,8 @@ spi1 = &ecspi2; spi3 = &ecspi3; spi4 = &ecspi4; + usb0 = &usbotg1; + usb1 = &usbotg2; usbphy0 = &usbphy1; usbphy1 = &usbphy2; }; @@ -49,20 +51,18 @@ device_type = "cpu"; reg = <0>; next-level-cache = <&L2>; - operating-points = < + operating-points = /* kHz uV */ - 996000 1275000 - 792000 1175000 - 396000 1075000 - 198000 975000 - >; - fsl,soc-operating-points = < + <996000 1275000>, + <792000 1175000>, + <396000 1075000>, + <198000 975000>; + fsl,soc-operating-points = /* ARM kHz SOC-PU uV */ - 996000 1175000 - 792000 1175000 - 396000 1175000 - 198000 1175000 - >; + <996000 1175000>, + <792000 1175000>, + <396000 1175000>, + <198000 1175000>; clock-latency = <61036>; /* two CLK32 periods */ #cooling-cells = <2>; clocks = <&clks IMX6SLL_CLK_ARM>, @@ -123,6 +123,9 @@ ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x20000>; + ranges = <0 0x00900000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; }; intc: interrupt-controller@a01000 { @@ -134,7 +137,7 @@ interrupt-parent = <&intc>; }; - L2: l2-cache@a02000 { + L2: cache-controller@a02000 { compatible = "arm,pl310-cache"; reg = <0x00a02000 0x1000>; interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; @@ -269,7 +272,7 @@ status = "disabled"; }; - ssi1: ssi-controller@2028000 { + ssi1: ssi@2028000 { compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; reg = <0x02028000 0x4000>; interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; @@ -282,7 +285,7 @@ status = "disabled"; }; - ssi2: ssi-controller@202c000 { + ssi2: ssi@202c000 { compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; reg = <0x0202c000 0x4000>; interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; @@ -295,7 +298,7 @@ status = "disabled"; }; - ssi3: ssi-controller@2030000 { + ssi3: ssi@2030000 { compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; reg = <0x02030000 0x4000>; interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; @@ -547,7 +550,7 @@ reg = <0x020ca000 0x1000>; interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SLL_CLK_USBPHY2>; - phy-reg_3p0-supply = <®_3p0>; + phy-3p0-supply = <®_3p0>; fsl,anatop = <&anatop>; }; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 531a52c1e987..1afeae14560a 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -49,6 +49,9 @@ spi2 = &ecspi3; spi3 = &ecspi4; spi4 = &ecspi5; + usb0 = &usbotg1; + usb1 = &usbotg2; + usb2 = &usbh; usbphy0 = &usbphy1; usbphy1 = &usbphy2; }; @@ -163,12 +166,18 @@ ocram_s: sram@8f8000 { compatible = "mmio-sram"; reg = <0x008f8000 0x4000>; + ranges = <0 0x008f8000 0x4000>; + #address-cells = <1>; + #size-cells = <1>; clocks = <&clks IMX6SX_CLK_OCRAM_S>; }; ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x20000>; + ranges = <0 0x00900000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; clocks = <&clks IMX6SX_CLK_OCRAM>; }; @@ -181,7 +190,7 @@ interrupt-parent = <&intc>; }; - L2: l2-cache@a02000 { + L2: cache-controller@a02000 { compatible = "arm,pl310-cache"; reg = <0x00a02000 0x1000>; interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; @@ -202,7 +211,7 @@ power-domains = <&pd_pu>; }; - dma_apbh: dma-apbh@1804000 { + dma_apbh: dma-controller@1804000 { compatible = "fsl,imx6sx-dma-apbh", "fsl,imx28-dma-apbh"; reg = <0x01804000 0x2000>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, @@ -466,7 +475,7 @@ status = "disabled"; }; - gpt: gpt@2098000 { + gpt: timer@2098000 { compatible = "fsl,imx6sx-gpt", "fsl,imx6dl-gpt"; reg = <0x02098000 0x4000>; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; @@ -949,6 +958,8 @@ <&clks IMX6SX_CLK_USDHC1>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; status = "disabled"; }; @@ -961,6 +972,8 @@ <&clks IMX6SX_CLK_USDHC2>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; status = "disabled"; }; @@ -973,6 +986,8 @@ <&clks IMX6SX_CLK_USDHC3>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index f008036e9294..7037d2a45e60 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -47,6 +47,8 @@ spi1 = &ecspi2; spi2 = &ecspi3; spi3 = &ecspi4; + usb0 = &usbotg1; + usb1 = &usbotg2; usbphy0 = &usbphy1; usbphy1 = &usbphy2; }; @@ -62,20 +64,18 @@ clock-frequency = <696000000>; clock-latency = <61036>; /* two CLK32 periods */ #cooling-cells = <2>; - operating-points = < + operating-points = /* kHz uV */ - 696000 1275000 - 528000 1175000 - 396000 1025000 - 198000 950000 - >; - fsl,soc-operating-points = < + <696000 1275000>, + <528000 1175000>, + <396000 1025000>, + <198000 950000>; + fsl,soc-operating-points = /* KHz uV */ - 696000 1275000 - 528000 1175000 - 396000 1175000 - 198000 1175000 - >; + <696000 1275000>, + <528000 1175000>, + <396000 1175000>, + <198000 1175000>; clocks = <&clks IMX6UL_CLK_ARM>, <&clks IMX6UL_CLK_PLL2_BUS>, <&clks IMX6UL_CLK_PLL2_PFD2>, @@ -157,6 +157,9 @@ ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x20000>; + ranges = <0 0x00900000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; }; intc: interrupt-controller@a01000 { @@ -171,7 +174,7 @@ <0x00a06000 0x2000>; }; - dma_apbh: dma-apbh@1804000 { + dma_apbh: dma-controller@1804000 { compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh"; reg = <0x01804000 0x2000>; interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>, @@ -430,7 +433,7 @@ status = "disabled"; }; - gpt1: gpt@2098000 { + gpt1: timer@2098000 { compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt"; reg = <0x02098000 0x4000>; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; @@ -704,7 +707,7 @@ reg = <0x020e4000 0x4000>; }; - gpt2: gpt@20e8000 { + gpt2: timer@20e8000 { compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt"; reg = <0x020e8000 0x4000>; interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; @@ -966,7 +969,7 @@ }; csi: csi@21c4000 { - compatible = "fsl,imx6ul-csi", "fsl,imx7-csi"; + compatible = "fsl,imx6ul-csi"; reg = <0x021c4000 0x4000>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6UL_CLK_CSI>; @@ -975,7 +978,7 @@ }; lcdif: lcdif@21c8000 { - compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif"; + compatible = "fsl,imx6ul-lcdif", "fsl,imx6sx-lcdif"; reg = <0x021c8000 0x4000>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6UL_CLK_LCDIF_PIX>, @@ -996,7 +999,7 @@ qspi: spi@21e0000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,imx6ul-qspi", "fsl,imx6sx-qspi"; + compatible = "fsl,imx6ul-qspi"; reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>; reg-names = "QuadSPI", "QuadSPI-memory"; interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/imx7d-pico-hobbit.dts b/arch/arm/boot/dts/imx7d-pico-hobbit.dts index d917dc4f2f22..6ad39dca7009 100644 --- a/arch/arm/boot/dts/imx7d-pico-hobbit.dts +++ b/arch/arm/boot/dts/imx7d-pico-hobbit.dts @@ -64,7 +64,7 @@ interrupt-parent = <&gpio2>; interrupts = <7 0>; spi-max-frequency = <1000000>; - pendown-gpio = <&gpio2 7 0>; + pendown-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>; vcc-supply = <®_3p3v>; ti,x-min = /bits/ 16 <0>; ti,x-max = /bits/ 16 <4095>; diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index a97cda17e484..88e62801b82e 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -176,13 +176,8 @@ pinctrl-0 = <&pinctrl_tsc2046_pendown>; interrupt-parent = <&gpio2>; interrupts = <29 0>; - pendown-gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>; - ti,x-min = /bits/ 16 <0>; - ti,x-max = /bits/ 16 <0>; - ti,y-min = /bits/ 16 <0>; - ti,y-max = /bits/ 16 <0>; - ti,pressure-max = /bits/ 16 <0>; - ti,x-plate-ohms = /bits/ 16 <400>; + pendown-gpio = <&gpio2 29 GPIO_ACTIVE_LOW>; + touchscreen-max-pressure = <255>; wakeup-source; }; }; diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index 9c8dd32cc035..8b65ca8b5f30 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -7,6 +7,12 @@ #include <dt-bindings/reset/imx7-reset.h> / { + aliases { + usb0 = &usbotg1; + usb1 = &usbotg2; + usb2 = &usbh; + }; + cpus { cpu0: cpu@0 { clock-frequency = <996000000>; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 8e7f13f807e7..67d6d9b1e5d2 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -47,6 +47,8 @@ spi1 = &ecspi2; spi2 = &ecspi3; spi3 = &ecspi4; + usb0 = &usbotg1; + usb1 = &usbh; }; cpus { @@ -460,8 +462,8 @@ fsl,input-sel = <&iomuxc>; }; - gpt1: gpt@302d0000 { - compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; + gpt1: timer@302d0000 { + compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt"; reg = <0x302d0000 0x10000>; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX7D_GPT1_ROOT_CLK>, @@ -469,8 +471,8 @@ clock-names = "ipg", "per"; }; - gpt2: gpt@302e0000 { - compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; + gpt2: timer@302e0000 { + compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt"; reg = <0x302e0000 0x10000>; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX7D_GPT2_ROOT_CLK>, @@ -479,8 +481,8 @@ status = "disabled"; }; - gpt3: gpt@302f0000 { - compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; + gpt3: timer@302f0000 { + compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt"; reg = <0x302f0000 0x10000>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX7D_GPT3_ROOT_CLK>, @@ -489,8 +491,8 @@ status = "disabled"; }; - gpt4: gpt@30300000 { - compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; + gpt4: timer@30300000 { + compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt"; reg = <0x30300000 0x10000>; interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX7D_GPT4_ROOT_CLK>, @@ -520,7 +522,7 @@ mux: mux-controller { compatible = "mmio-mux"; - #mux-control-cells = <0>; + #mux-control-cells = <1>; mux-reg-masks = <0x14 0x00000010>; }; @@ -1155,6 +1157,8 @@ <&clks IMX7D_USDHC1_ROOT_CLK>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; + fsl,tuning-step = <2>; + fsl,tuning-start-tap = <20>; status = "disabled"; }; @@ -1167,6 +1171,8 @@ <&clks IMX7D_USDHC2_ROOT_CLK>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; + fsl,tuning-step = <2>; + fsl,tuning-start-tap = <20>; status = "disabled"; }; @@ -1179,6 +1185,8 @@ <&clks IMX7D_USDHC3_ROOT_CLK>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; + fsl,tuning-step = <2>; + fsl,tuning-start-tap = <20>; status = "disabled"; }; @@ -1214,14 +1222,13 @@ }; }; - dma_apbh: dma-apbh@33000000 { + dma_apbh: dma-controller@33000000 { compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh"; reg = <0x33000000 0x2000>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3"; #dma-cells = <1>; dma-channels = <4>; clocks = <&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>; diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts index 94d2ff9836d0..e6c5a99e0741 100644 --- a/arch/arm/boot/dts/integratorap.dts +++ b/arch/arm/boot/dts/integratorap.dts @@ -155,6 +155,7 @@ pci: pciv3@62000000 { compatible = "arm,integrator-ap-pci", "v3,v360epc-pci"; + device_type = "pci"; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi index 7b151acb9984..88b70ba1c8fe 100644 --- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi +++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi @@ -10,6 +10,11 @@ ocp@f1000000 { pinctrl: pin-controller@10000 { + /* Non-default UART pins */ + pmx_uart0: pmx-uart0 { + marvell,pins = "mpp4", "mpp5"; + }; + pmx_power_hdd: pmx-power-hdd { marvell,pins = "mpp10"; marvell,function = "gpo"; @@ -213,22 +218,11 @@ &mdio { status = "okay"; - ethphy0: ethernet-phy@0 { - reg = <0>; - }; - ethphy1: ethernet-phy@8 { reg = <8>; }; }; -ð0 { - status = "okay"; - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; - ð1 { status = "okay"; ethernet1-port@0 { diff --git a/arch/arm/boot/dts/moxart-uc7112lx.dts b/arch/arm/boot/dts/moxart-uc7112lx.dts index eb5291b0ee3a..e07b807b4cec 100644 --- a/arch/arm/boot/dts/moxart-uc7112lx.dts +++ b/arch/arm/boot/dts/moxart-uc7112lx.dts @@ -79,7 +79,7 @@ clocks = <&ref12>; }; -&sdhci { +&mmc { status = "okay"; }; diff --git a/arch/arm/boot/dts/moxart.dtsi b/arch/arm/boot/dts/moxart.dtsi index f5f070a87482..764832ddfa78 100644 --- a/arch/arm/boot/dts/moxart.dtsi +++ b/arch/arm/boot/dts/moxart.dtsi @@ -93,8 +93,8 @@ clock-names = "PCLK"; }; - sdhci: sdhci@98e00000 { - compatible = "moxa,moxart-sdhci"; + mmc: mmc@98e00000 { + compatible = "moxa,moxart-mmc"; reg = <0x98e00000 0x5C>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_apb>; diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi index cdb632df152a..11ae18944195 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi @@ -227,7 +227,7 @@ interrupt-parent = <&gpio2>; interrupts = <25 0>; /* gpio_57 */ - pendown-gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio2 25 GPIO_ACTIVE_LOW>; ti,x-min = /bits/ 16 <0x0>; ti,x-max = /bits/ 16 <0x0fff>; diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi index 3decc2d78a6c..a7f99ae0c1fe 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi +++ b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi @@ -54,7 +54,7 @@ interrupt-parent = <&gpio1>; interrupts = <27 0>; /* gpio_27 */ - pendown-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio1 27 GPIO_ACTIVE_LOW>; ti,x-min = /bits/ 16 <0x0>; ti,x-max = /bits/ 16 <0x0fff>; diff --git a/arch/arm/boot/dts/omap3-gta04a5one.dts b/arch/arm/boot/dts/omap3-gta04a5one.dts index 9db9fe67cd63..95df45cc70c0 100644 --- a/arch/arm/boot/dts/omap3-gta04a5one.dts +++ b/arch/arm/boot/dts/omap3-gta04a5one.dts @@ -5,9 +5,11 @@ #include "omap3-gta04a5.dts" -&omap3_pmx_core { +/ { model = "Goldelico GTA04A5/Letux 2804 with OneNAND"; +}; +&omap3_pmx_core { gpmc_pins: pinmux_gpmc_pins { pinctrl-single,pins = < diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi index c22833d4e568..fba69b3f79c2 100644 --- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi +++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi @@ -311,7 +311,7 @@ interrupt-parent = <&gpio1>; interrupts = <8 0>; /* boot6 / gpio_8 */ spi-max-frequency = <1000000>; - pendown-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>; vcc-supply = <®_vcc3>; pinctrl-names = "default"; pinctrl-0 = <&tsc2048_pins>; diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi index 185ce53de0ec..0523a369a4d7 100644 --- a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi @@ -149,7 +149,7 @@ interrupt-parent = <&gpio4>; interrupts = <18 0>; /* gpio_114 */ - pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio4 18 GPIO_ACTIVE_LOW>; ti,x-min = /bits/ 16 <0x0>; ti,x-max = /bits/ 16 <0x0fff>; diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi index 7fe0f9148232..d340eb722f12 100644 --- a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi @@ -160,7 +160,7 @@ interrupt-parent = <&gpio4>; interrupts = <18 0>; /* gpio_114 */ - pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio4 18 GPIO_ACTIVE_LOW>; ti,x-min = /bits/ 16 <0x0>; ti,x-max = /bits/ 16 <0x0fff>; diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi index 150d5be42d27..4ea5656825de 100644 --- a/arch/arm/boot/dts/omap3-pandora-common.dtsi +++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi @@ -651,7 +651,7 @@ pinctrl-0 = <&penirq_pins>; interrupt-parent = <&gpio3>; interrupts = <30 IRQ_TYPE_NONE>; /* GPIO_94 */ - pendown-gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio3 30 GPIO_ACTIVE_LOW>; vcc-supply = <&vaux4>; ti,x-min = /bits/ 16 <0>; diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts index a40fe8d49da6..73425f692774 100644 --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts @@ -656,12 +656,12 @@ /* Configure pwm clock source for timers 8 & 9 */ &timer8 { assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>; - assigned-clock-parents = <&sys_clkin_ck>; + assigned-clock-parents = <&sys_32k_ck>; }; &timer9 { assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>; - assigned-clock-parents = <&sys_clkin_ck>; + assigned-clock-parents = <&sys_32k_ck>; }; /* @@ -678,6 +678,7 @@ &uart3 { interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH &omap4_pmx_core 0x17c>; + overrun-throttle-ms = <500>; }; &uart4 { diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts index e78d3718f145..d38781025eef 100644 --- a/arch/arm/boot/dts/omap5-cm-t54.dts +++ b/arch/arm/boot/dts/omap5-cm-t54.dts @@ -354,7 +354,7 @@ interrupt-parent = <&gpio1>; interrupts = <15 0>; /* gpio1_wk15 */ - pendown-gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio1 15 GPIO_ACTIVE_LOW>; ti,x-min = /bits/ 16 <0x0>; diff --git a/arch/arm/boot/dts/ox820.dtsi b/arch/arm/boot/dts/ox820.dtsi index 90846a7655b4..dde4364892bf 100644 --- a/arch/arm/boot/dts/ox820.dtsi +++ b/arch/arm/boot/dts/ox820.dtsi @@ -287,7 +287,7 @@ clocks = <&armclk>; }; - gic: gic@1000 { + gic: interrupt-controller@1000 { compatible = "arm,arm11mp-gic"; interrupt-controller; #interrupt-cells = <3>; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 764984c95c68..8c8a576ab9c0 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -1570,7 +1570,7 @@ }; etb@1a01000 { - compatible = "coresight-etb10", "arm,primecell"; + compatible = "arm,coresight-etb10", "arm,primecell"; reg = <0x1a01000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>; diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index 338256c59ca5..fc31ee980639 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -393,8 +393,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000>, - <0x82000000 0 0x40300000 0x40300000 0 0x00d00000>; + ranges = <0x81000000 0x0 0x00000000 0x40200000 0x0 0x00100000>, + <0x82000000 0x0 0x40300000 0x40300000 0x0 0x00d00000>; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index 16c0da97932c..976a8a1fa953 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -451,8 +451,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00100000 /* downstream I/O */ - 0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */ + ranges = <0x81000000 0x0 0x00000000 0x0fe00000 0x0 0x00010000 /* I/O */ + 0x82000000 0x0 0x08000000 0x08000000 0x0 0x07e00000>; /* MEM */ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; @@ -502,8 +502,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00100000 /* downstream I/O */ - 0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */ + ranges = <0x81000000 0x0 0x00000000 0x31e00000 0x0 0x00010000 /* I/O */ + 0x82000000 0x0 0x2e000000 0x2e000000 0x0 0x03e00000>; /* MEM */ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; @@ -553,8 +553,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00100000 /* downstream I/O */ - 0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */ + ranges = <0x81000000 0x0 0x00000000 0x35e00000 0x0 0x00010000 /* I/O */ + 0x82000000 0x0 0x32000000 0x32000000 0x0 0x03e00000>; /* MEM */ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi index 356e9535f7a6..8b3eb93ec451 100644 --- a/arch/arm/boot/dts/qcom-mdm9615.dtsi +++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi @@ -82,14 +82,12 @@ }; }; - regulators { - vsdcc_fixed: vsdcc-regulator { - compatible = "regulator-fixed"; - regulator-name = "SDCC Power"; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - regulator-always-on; - }; + vsdcc_fixed: vsdcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "SDCC Power"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + regulator-always-on; }; soc: soc { @@ -323,6 +321,7 @@ pmicgpio: gpio@150 { compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio"; + reg = <0x150>; interrupt-controller; #interrupt-cells = <2>; gpio-controller; diff --git a/arch/arm/boot/dts/qcom-pm8841.dtsi b/arch/arm/boot/dts/qcom-pm8841.dtsi index 2fd59c440903..c73e5b149ac5 100644 --- a/arch/arm/boot/dts/qcom-pm8841.dtsi +++ b/arch/arm/boot/dts/qcom-pm8841.dtsi @@ -25,6 +25,7 @@ compatible = "qcom,spmi-temp-alarm"; reg = <0x2400>; interrupts = <4 0x24 0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts index 2a7e6624efb9..ea23ba98625e 100644 --- a/arch/arm/boot/dts/rk3036-evb.dts +++ b/arch/arm/boot/dts/rk3036-evb.dts @@ -31,7 +31,7 @@ &i2c1 { status = "okay"; - hym8563: hym8563@51 { + hym8563: rtc@51 { compatible = "haoyu,hym8563"; reg = <0x51>; #clock-cells = <0>; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index c9a7f5409960..f8e51ca3ee00 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -67,7 +67,7 @@ #sound-dai-cells = <0>; }; - ir_recv: gpio-ir-receiver { + ir_recv: ir-receiver { compatible = "gpio-ir-receiver"; gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index ee8a24a0e3cb..5e8ba80d7b4f 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -404,7 +404,7 @@ rockchip,pins = <2 RK_PD3 1 &pcfg_pull_none>; }; - lcdc1_rgb24: ldcd1-rgb24 { + lcdc1_rgb24: lcdc1-rgb24 { rockchip,pins = <2 RK_PA0 1 &pcfg_pull_none>, <2 RK_PA1 1 &pcfg_pull_none>, <2 RK_PA2 1 &pcfg_pull_none>, @@ -632,7 +632,6 @@ &global_timer { interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; - status = "disabled"; }; &local_timer { diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts index 80080767c365..9ac40c100e3f 100644 --- a/arch/arm/boot/dts/rk3288-evb-act8846.dts +++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts @@ -53,7 +53,7 @@ vin-supply = <&vcc_sys>; }; - hym8563@51 { + rtc@51 { compatible = "haoyu,hym8563"; reg = <0x51>; diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi index 5e0a19004e46..8d418881166f 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -233,7 +233,7 @@ vin-supply = <&vcc_sys>; }; - hym8563: hym8563@51 { + hym8563: rtc@51 { compatible = "haoyu,hym8563"; reg = <0x51>; #clock-cells = <0>; diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts index c41d012c8850..bf8f3f9bb4d5 100644 --- a/arch/arm/boot/dts/rk3288-miqi.dts +++ b/arch/arm/boot/dts/rk3288-miqi.dts @@ -145,7 +145,7 @@ vin-supply = <&vcc_sys>; }; - hym8563: hym8563@51 { + hym8563: rtc@51 { compatible = "haoyu,hym8563"; reg = <0x51>; #clock-cells = <0>; diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts index cdcdc921ee09..7220de126635 100644 --- a/arch/arm/boot/dts/rk3288-rock2-square.dts +++ b/arch/arm/boot/dts/rk3288-rock2-square.dts @@ -165,7 +165,7 @@ }; &i2c0 { - hym8563: hym8563@51 { + hym8563: rtc@51 { compatible = "haoyu,hym8563"; reg = <0x51>; #clock-cells = <0>; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 7dcafd0833ba..36f943a3f3ad 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -942,7 +942,7 @@ status = "disabled"; }; - spdif: sound@ff88b0000 { + spdif: sound@ff8b0000 { compatible = "rockchip,rk3288-spdif", "rockchip,rk3066-spdif"; reg = <0x0 0xff8b0000 0x0 0x10000>; #sound-dai-cells = <0>; @@ -1188,6 +1188,7 @@ clock-names = "dp", "pclk"; phys = <&edp_phy>; phy-names = "dp"; + power-domains = <&power RK3288_PD_VIO>; resets = <&cru SRST_EDP>; reset-names = "dp"; rockchip,grf = <&grf>; diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index bce0b05ef7bf..0580eea90fbc 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -108,6 +108,13 @@ reg = <0x1013c200 0x20>; interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>; clocks = <&cru CORE_PERI>; + status = "disabled"; + /* The clock source and the sched_clock provided by the arm_global_timer + * on Rockchip rk3066a/rk3188 are quite unstable because their rates + * depend on the CPU frequency. + * Keep the arm_global_timer disabled in order to have the + * DW_APB_TIMER (rk3066a) or ROCKCHIP_TIMER (rk3188) selected by default. + */ }; local_timer: local-timer@1013c600 { diff --git a/arch/arm/boot/dts/s3c6410-mini6410.dts b/arch/arm/boot/dts/s3c6410-mini6410.dts index 1aeac33b0d34..0b07b3c31960 100644 --- a/arch/arm/boot/dts/s3c6410-mini6410.dts +++ b/arch/arm/boot/dts/s3c6410-mini6410.dts @@ -28,29 +28,21 @@ bootargs = "console=ttySAC0,115200n8 earlyprintk rootwait root=/dev/mmcblk0p1"; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - fin_pll: oscillator@0 { - compatible = "fixed-clock"; - reg = <0>; - clock-frequency = <12000000>; - clock-output-names = "fin_pll"; - #clock-cells = <0>; - }; + fin_pll: oscillator-0 { + compatible = "fixed-clock"; + clock-frequency = <12000000>; + clock-output-names = "fin_pll"; + #clock-cells = <0>; + }; - xusbxti: oscillator@1 { - compatible = "fixed-clock"; - reg = <1>; - clock-output-names = "xusbxti"; - clock-frequency = <48000000>; - #clock-cells = <0>; - }; + xusbxti: oscillator-1 { + compatible = "fixed-clock"; + clock-output-names = "xusbxti"; + clock-frequency = <48000000>; + #clock-cells = <0>; }; - srom-cs1@18000000 { + srom-cs1-bus@18000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -59,7 +51,7 @@ ethernet@18000000 { compatible = "davicom,dm9000"; - reg = <0x18000000 0x2 0x18000004 0x2>; + reg = <0x18000000 0x2>, <0x18000004 0x2>; interrupt-parent = <&gpn>; interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; davicom,no-eeprom; @@ -201,12 +193,12 @@ }; &pinctrl0 { - gpio_leds: gpio-leds { + gpio_leds: gpio-leds-pins { samsung,pins = "gpk-4", "gpk-5", "gpk-6", "gpk-7"; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - gpio_keys: gpio-keys { + gpio_keys: gpio-keys-pins { samsung,pins = "gpn-0", "gpn-1", "gpn-2", "gpn-3", "gpn-4", "gpn-5", "gpl-11", "gpl-12"; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; diff --git a/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi index 8e9594d64b57..0a3186d57cb5 100644 --- a/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi +++ b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi @@ -16,111 +16,111 @@ * Pin banks */ - gpa: gpa { + gpa: gpa-gpio-bank { gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; - gpb: gpb { + gpb: gpb-gpio-bank { gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; - gpc: gpc { + gpc: gpc-gpio-bank { gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; - gpd: gpd { + gpd: gpd-gpio-bank { gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; - gpe: gpe { + gpe: gpe-gpio-bank { gpio-controller; #gpio-cells = <2>; }; - gpf: gpf { + gpf: gpf-gpio-bank { gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; - gpg: gpg { + gpg: gpg-gpio-bank { gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; - gph: gph { + gph: gph-gpio-bank { gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; - gpi: gpi { + gpi: gpi-gpio-bank { gpio-controller; #gpio-cells = <2>; }; - gpj: gpj { + gpj: gpj-gpio-bank { gpio-controller; #gpio-cells = <2>; }; - gpk: gpk { + gpk: gpk-gpio-bank { gpio-controller; #gpio-cells = <2>; }; - gpl: gpl { + gpl: gpl-gpio-bank { gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; - gpm: gpm { + gpm: gpm-gpio-bank { gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; - gpn: gpn { + gpn: gpn-gpio-bank { gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; - gpo: gpo { + gpo: gpo-gpio-bank { gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; - gpp: gpp { + gpp: gpp-gpio-bank { gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; - gpq: gpq { + gpq: gpq-gpio-bank { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -131,225 +131,225 @@ * Pin groups */ - uart0_data: uart0-data { + uart0_data: uart0-data-pins { samsung,pins = "gpa-0", "gpa-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - uart0_fctl: uart0-fctl { + uart0_fctl: uart0-fctl-pins { samsung,pins = "gpa-2", "gpa-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - uart1_data: uart1-data { + uart1_data: uart1-data-pins { samsung,pins = "gpa-4", "gpa-5"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - uart1_fctl: uart1-fctl { + uart1_fctl: uart1-fctl-pins { samsung,pins = "gpa-6", "gpa-7"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - uart2_data: uart2-data { + uart2_data: uart2-data-pins { samsung,pins = "gpb-0", "gpb-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - uart3_data: uart3-data { + uart3_data: uart3-data-pins { samsung,pins = "gpb-2", "gpb-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - ext_dma_0: ext-dma-0 { + ext_dma_0: ext-dma-0-pins { samsung,pins = "gpb-0", "gpb-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - ext_dma_1: ext-dma-1 { + ext_dma_1: ext-dma-1-pins { samsung,pins = "gpb-2", "gpb-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_4>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - irda_data_0: irda-data-0 { + irda_data_0: irda-data-0-pins { samsung,pins = "gpb-0", "gpb-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_4>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - irda_data_1: irda-data-1 { + irda_data_1: irda-data-1-pins { samsung,pins = "gpb-2", "gpb-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - irda_sdbw: irda-sdbw { + irda_sdbw: irda-sdbw-pins { samsung,pins = "gpb-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - i2c0_bus: i2c0-bus { + i2c0_bus: i2c0-bus-pins { samsung,pins = "gpb-5", "gpb-6"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_UP>; }; - i2c1_bus: i2c1-bus { + i2c1_bus: i2c1-bus-pins { /* S3C6410-only */ samsung,pins = "gpb-2", "gpb-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_6>; samsung,pin-pud = <S3C64XX_PIN_PULL_UP>; }; - spi0_bus: spi0-bus { + spi0_bus: spi0-bus-pins { samsung,pins = "gpc-0", "gpc-1", "gpc-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_UP>; }; - spi0_cs: spi0-cs { + spi0_cs: spi0-cs-pins { samsung,pins = "gpc-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - spi1_bus: spi1-bus { + spi1_bus: spi1-bus-pins { samsung,pins = "gpc-4", "gpc-5", "gpc-6"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_UP>; }; - spi1_cs: spi1-cs { + spi1_cs: spi1-cs-pins { samsung,pins = "gpc-7"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - sd0_cmd: sd0-cmd { + sd0_cmd: sd0-cmd-pins { samsung,pins = "gpg-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - sd0_clk: sd0-clk { + sd0_clk: sd0-clk-pins { samsung,pins = "gpg-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - sd0_bus1: sd0-bus1 { + sd0_bus1: sd0-bus1-pins { samsung,pins = "gpg-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - sd0_bus4: sd0-bus4 { + sd0_bus4: sd0-bus4-pins { samsung,pins = "gpg-2", "gpg-3", "gpg-4", "gpg-5"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - sd0_cd: sd0-cd { + sd0_cd: sd0-cd-pins { samsung,pins = "gpg-6"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_UP>; }; - sd1_cmd: sd1-cmd { + sd1_cmd: sd1-cmd-pins { samsung,pins = "gph-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - sd1_clk: sd1-clk { + sd1_clk: sd1-clk-pins { samsung,pins = "gph-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - sd1_bus1: sd1-bus1 { + sd1_bus1: sd1-bus1-pins { samsung,pins = "gph-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - sd1_bus4: sd1-bus4 { + sd1_bus4: sd1-bus4-pins { samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - sd1_bus8: sd1-bus8 { + sd1_bus8: sd1-bus8-pins { samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5", "gph-6", "gph-7", "gph-8", "gph-9"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - sd1_cd: sd1-cd { + sd1_cd: sd1-cd-pins { samsung,pins = "gpg-6"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_UP>; }; - sd2_cmd: sd2-cmd { + sd2_cmd: sd2-cmd-pins { samsung,pins = "gpc-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - sd2_clk: sd2-clk { + sd2_clk: sd2-clk-pins { samsung,pins = "gpc-5"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - sd2_bus1: sd2-bus1 { + sd2_bus1: sd2-bus1-pins { samsung,pins = "gph-6"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - sd2_bus4: sd2-bus4 { + sd2_bus4: sd2-bus4-pins { samsung,pins = "gph-6", "gph-7", "gph-8", "gph-9"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - i2s0_bus: i2s0-bus { + i2s0_bus: i2s0-bus-pins { samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - i2s0_cdclk: i2s0-cdclk { + i2s0_cdclk: i2s0-cdclk-pins { samsung,pins = "gpd-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - i2s1_bus: i2s1-bus { + i2s1_bus: i2s1-bus-pins { samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - i2s1_cdclk: i2s1-cdclk { + i2s1_cdclk: i2s1-cdclk-pins { samsung,pins = "gpe-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - i2s2_bus: i2s2-bus { + i2s2_bus: i2s2-bus-pins { /* S3C6410-only */ samsung,pins = "gpc-4", "gpc-5", "gpc-6", "gph-6", "gph-8", "gph-9"; @@ -357,50 +357,50 @@ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - i2s2_cdclk: i2s2-cdclk { + i2s2_cdclk: i2s2-cdclk-pins { /* S3C6410-only */ samsung,pins = "gph-7"; samsung,pin-function = <EXYNOS_PIN_FUNC_5>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - pcm0_bus: pcm0-bus { + pcm0_bus: pcm0-bus-pins { samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - pcm0_extclk: pcm0-extclk { + pcm0_extclk: pcm0-extclk-pins { samsung,pins = "gpd-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - pcm1_bus: pcm1-bus { + pcm1_bus: pcm1-bus-pins { samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - pcm1_extclk: pcm1-extclk { + pcm1_extclk: pcm1-extclk-pins { samsung,pins = "gpe-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - ac97_bus_0: ac97-bus-0 { + ac97_bus_0: ac97-bus-0-pins { samsung,pins = "gpd-0", "gpd-1", "gpd-2", "gpd-3", "gpd-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_4>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - ac97_bus_1: ac97-bus-1 { + ac97_bus_1: ac97-bus-1-pins { samsung,pins = "gpe-0", "gpe-1", "gpe-2", "gpe-3", "gpe-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_4>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - cam_port: cam-port { + cam_port: cam-port-pins { samsung,pins = "gpf-0", "gpf-1", "gpf-2", "gpf-4", "gpf-5", "gpf-6", "gpf-7", "gpf-8", "gpf-9", "gpf-10", "gpf-11", "gpf-12"; @@ -408,242 +408,242 @@ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - cam_rst: cam-rst { + cam_rst: cam-rst-pins { samsung,pins = "gpf-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - cam_field: cam-field { + cam_field: cam-field-pins { /* S3C6410-only */ samsung,pins = "gpb-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - pwm_extclk: pwm-extclk { + pwm_extclk: pwm-extclk-pins { samsung,pins = "gpf-13"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - pwm0_out: pwm0-out { + pwm0_out: pwm0-out-pins { samsung,pins = "gpf-14"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - pwm1_out: pwm1-out { + pwm1_out: pwm1-out-pins { samsung,pins = "gpf-15"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - clkout0: clkout-0 { + clkout0: clkout-0-pins { samsung,pins = "gpf-14"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_col0_0: keypad-col0-0 { + keypad_col0_0: keypad-col0-0-pins { samsung,pins = "gph-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_4>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_col1_0: keypad-col1-0 { + keypad_col1_0: keypad-col1-0-pins { samsung,pins = "gph-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_4>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_col2_0: keypad-col2-0 { + keypad_col2_0: keypad-col2-0-pins { samsung,pins = "gph-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_4>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_col3_0: keypad-col3-0 { + keypad_col3_0: keypad-col3-0-pins { samsung,pins = "gph-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_4>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_col4_0: keypad-col4-0 { + keypad_col4_0: keypad-col4-0-pins { samsung,pins = "gph-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_4>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_col5_0: keypad-col5-0 { + keypad_col5_0: keypad-col5-0-pins { samsung,pins = "gph-5"; samsung,pin-function = <EXYNOS_PIN_FUNC_4>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_col6_0: keypad-col6-0 { + keypad_col6_0: keypad-col6-0-pins { samsung,pins = "gph-6"; samsung,pin-function = <EXYNOS_PIN_FUNC_4>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_col7_0: keypad-col7-0 { + keypad_col7_0: keypad-col7-0-pins { samsung,pins = "gph-7"; samsung,pin-function = <EXYNOS_PIN_FUNC_4>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_col0_1: keypad-col0-1 { + keypad_col0_1: keypad-col0-1-pins { samsung,pins = "gpl-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_col1_1: keypad-col1-1 { + keypad_col1_1: keypad-col1-1-pins { samsung,pins = "gpl-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_col2_1: keypad-col2-1 { + keypad_col2_1: keypad-col2-1-pins { samsung,pins = "gpl-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_col3_1: keypad-col3-1 { + keypad_col3_1: keypad-col3-1-pins { samsung,pins = "gpl-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_col4_1: keypad-col4-1 { + keypad_col4_1: keypad-col4-1-pins { samsung,pins = "gpl-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_col5_1: keypad-col5-1 { + keypad_col5_1: keypad-col5-1-pins { samsung,pins = "gpl-5"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_col6_1: keypad-col6-1 { + keypad_col6_1: keypad-col6-1-pins { samsung,pins = "gpl-6"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_col7_1: keypad-col7-1 { + keypad_col7_1: keypad-col7-1-pins { samsung,pins = "gpl-7"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_row0_0: keypad-row0-0 { + keypad_row0_0: keypad-row0-0-pins { samsung,pins = "gpk-8"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_row1_0: keypad-row1-0 { + keypad_row1_0: keypad-row1-0-pins { samsung,pins = "gpk-9"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_row2_0: keypad-row2-0 { + keypad_row2_0: keypad-row2-0-pins { samsung,pins = "gpk-10"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_row3_0: keypad-row3-0 { + keypad_row3_0: keypad-row3-0-pins { samsung,pins = "gpk-11"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_row4_0: keypad-row4-0 { + keypad_row4_0: keypad-row4-0-pins { samsung,pins = "gpk-12"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_row5_0: keypad-row5-0 { + keypad_row5_0: keypad-row5-0-pins { samsung,pins = "gpk-13"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_row6_0: keypad-row6-0 { + keypad_row6_0: keypad-row6-0-pins { samsung,pins = "gpk-14"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_row7_0: keypad-row7-0 { + keypad_row7_0: keypad-row7-0-pins { samsung,pins = "gpk-15"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_row0_1: keypad-row0-1 { + keypad_row0_1: keypad-row0-1-pins { samsung,pins = "gpn-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_row1_1: keypad-row1-1 { + keypad_row1_1: keypad-row1-1-pins { samsung,pins = "gpn-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_row2_1: keypad-row2-1 { + keypad_row2_1: keypad-row2-1-pins { samsung,pins = "gpn-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_row3_1: keypad-row3-1 { + keypad_row3_1: keypad-row3-1-pins { samsung,pins = "gpn-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_row4_1: keypad-row4-1 { + keypad_row4_1: keypad-row4-1-pins { samsung,pins = "gpn-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_row5_1: keypad-row5-1 { + keypad_row5_1: keypad-row5-1-pins { samsung,pins = "gpn-5"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_row6_1: keypad-row6-1 { + keypad_row6_1: keypad-row6-1-pins { samsung,pins = "gpn-6"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - keypad_row7_1: keypad-row7-1 { + keypad_row7_1: keypad-row7-1-pins { samsung,pins = "gpn-7"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - lcd_ctrl: lcd-ctrl { + lcd_ctrl: lcd-ctrl-pins { samsung,pins = "gpj-8", "gpj-9", "gpj-10", "gpj-11"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - lcd_data16: lcd-data-width16 { + lcd_data16: lcd-data-width16-pins { samsung,pins = "gpi-3", "gpi-4", "gpi-5", "gpi-6", "gpi-7", "gpi-10", "gpi-11", "gpi-12", "gpi-13", "gpi-14", "gpi-15", "gpj-3", @@ -652,7 +652,7 @@ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - lcd_data18: lcd-data-width18 { + lcd_data18: lcd-data-width18-pins { samsung,pins = "gpi-2", "gpi-3", "gpi-4", "gpi-5", "gpi-6", "gpi-7", "gpi-10", "gpi-11", "gpi-12", "gpi-13", "gpi-14", "gpi-15", @@ -662,7 +662,7 @@ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - lcd_data24: lcd-data-width24 { + lcd_data24: lcd-data-width24-pins { samsung,pins = "gpi-0", "gpi-1", "gpi-2", "gpi-3", "gpi-4", "gpi-5", "gpi-6", "gpi-7", "gpi-8", "gpi-9", "gpi-10", "gpi-11", @@ -673,7 +673,7 @@ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; - hsi_bus: hsi-bus { + hsi_bus: hsi-bus-pins { samsung,pins = "gpk-0", "gpk-1", "gpk-2", "gpk-3", "gpk-4", "gpk-5", "gpk-6", "gpk-7"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; diff --git a/arch/arm/boot/dts/s5pv210-smdkv210.dts b/arch/arm/boot/dts/s5pv210-smdkv210.dts index 84b38f185199..53a841ecf7a4 100644 --- a/arch/arm/boot/dts/s5pv210-smdkv210.dts +++ b/arch/arm/boot/dts/s5pv210-smdkv210.dts @@ -15,6 +15,7 @@ */ /dts-v1/; +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/input.h> #include "s5pv210.dtsi" @@ -31,11 +32,18 @@ reg = <0x20000000 0x40000000>; }; - ethernet@18000000 { + pmic_ap_clk: clock-0 { + /* Workaround for missing PMIC and its clock */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + ethernet@a8000000 { compatible = "davicom,dm9000"; - reg = <0xA8000000 0x2 0xA8000002 0x2>; + reg = <0xa8000000 0x2>, <0xa8000002 0x2>; interrupt-parent = <&gph1>; - interrupts = <1 4>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; local-mac-address = [00 00 de ad be ef]; davicom,no-eeprom; }; @@ -47,6 +55,14 @@ default-brightness-level = <6>; pinctrl-names = "default"; pinctrl-0 = <&pwm3_out>; + power-supply = <&dc5v_reg>; + }; + + dc5v_reg: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "DC5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; }; }; @@ -147,6 +163,8 @@ &rtc { status = "okay"; + clocks = <&clocks CLK_RTC>, <&pmic_ap_clk>; + clock-names = "rtc", "rtc_src"; }; &sdhci0 { diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi index 61822afa30ab..cd8f6e7a7f7f 100644 --- a/arch/arm/boot/dts/s5pv210.dtsi +++ b/arch/arm/boot/dts/s5pv210.dtsi @@ -571,7 +571,7 @@ interrupts = <29>; clocks = <&clocks CLK_CSIS>, <&clocks SCLK_CSIS>; - clock-names = "clk_csis", + clock-names = "csis", "sclk_csis"; bus-width = <4>; status = "disabled"; diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index 09816a2ee367..dbfdffd54003 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -933,7 +933,7 @@ clocks = <&pmc PMC_TYPE_PERIPHERAL 55>, <&pmc PMC_TYPE_GCK 55>; clock-names = "pclk", "gclk"; assigned-clocks = <&pmc PMC_TYPE_CORE PMC_I2S1_MUX>; - assigned-parrents = <&pmc PMC_TYPE_GCK 55>; + assigned-clock-parents = <&pmc PMC_TYPE_GCK 55>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/spear320-hmi.dts b/arch/arm/boot/dts/spear320-hmi.dts index 367ba48aac3e..5c562fb4886f 100644 --- a/arch/arm/boot/dts/spear320-hmi.dts +++ b/arch/arm/boot/dts/spear320-hmi.dts @@ -242,7 +242,7 @@ irq-trigger = <0x1>; stmpegpio: stmpe-gpio { - compatible = "stmpe,gpio"; + compatible = "st,stmpe-gpio"; reg = <0>; gpio-controller; #gpio-cells = <2>; diff --git a/arch/arm/boot/dts/spear600.dtsi b/arch/arm/boot/dts/spear600.dtsi index fd41243a0b2c..9d5a04a46b14 100644 --- a/arch/arm/boot/dts/spear600.dtsi +++ b/arch/arm/boot/dts/spear600.dtsi @@ -47,7 +47,7 @@ compatible = "arm,pl110", "arm,primecell"; reg = <0xfc200000 0x1000>; interrupt-parent = <&vic1>; - interrupts = <12>; + interrupts = <13>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi index 9314128df185..639a6b65749f 100644 --- a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi @@ -284,6 +284,88 @@ slew-rate = <2>; }; }; + + can1_pins_a: can1-0 { + pins1 { + pinmux = <STM32_PINMUX('A', 12, AF9)>; /* CAN1_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('A', 11, AF9)>; /* CAN1_RX */ + bias-pull-up; + }; + }; + + can1_pins_b: can1-1 { + pins1 { + pinmux = <STM32_PINMUX('B', 9, AF9)>; /* CAN1_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('B', 8, AF9)>; /* CAN1_RX */ + bias-pull-up; + }; + }; + + can1_pins_c: can1-2 { + pins1 { + pinmux = <STM32_PINMUX('D', 1, AF9)>; /* CAN1_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('D', 0, AF9)>; /* CAN1_RX */ + bias-pull-up; + + }; + }; + + can1_pins_d: can1-3 { + pins1 { + pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('H', 14, AF9)>; /* CAN1_RX */ + bias-pull-up; + + }; + }; + + can2_pins_a: can2-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 6, AF9)>; /* CAN2_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('B', 5, AF9)>; /* CAN2_RX */ + bias-pull-up; + }; + }; + + can2_pins_b: can2-1 { + pins1 { + pinmux = <STM32_PINMUX('B', 13, AF9)>; /* CAN2_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('B', 12, AF9)>; /* CAN2_RX */ + bias-pull-up; + }; + }; + + can3_pins_a: can3-0 { + pins1 { + pinmux = <STM32_PINMUX('A', 15, AF11)>; /* CAN3_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('A', 8, AF11)>; /* CAN3_RX */ + bias-pull-up; + }; + }; + + can3_pins_b: can3-1 { + pins1 { + pinmux = <STM32_PINMUX('B', 4, AF11)>; /* CAN3_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('B', 3, AF11)>; /* CAN3_RX */ + bias-pull-up; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi index a687c024daa9..0e9e930c60f0 100644 --- a/arch/arm/boot/dts/stm32mp157c.dtsi +++ b/arch/arm/boot/dts/stm32mp157c.dtsi @@ -515,7 +515,7 @@ compatible = "st,stm32-cec"; reg = <0x40016000 0x400>; interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc CEC_K>, <&clk_lse>; + clocks = <&rcc CEC_K>, <&rcc CEC>; clock-names = "cec", "hdmi-cec"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts index f19ed981da9d..3706216ffb40 100644 --- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts +++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts @@ -169,7 +169,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "mxicy,mx25l1606e", "winbond,w25q128"; + compatible = "mxicy,mx25l1606e", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <40000000>; }; diff --git a/arch/arm/boot/dts/suniv-f1c100s.dtsi b/arch/arm/boot/dts/suniv-f1c100s.dtsi index 6100d3b75f61..def830101448 100644 --- a/arch/arm/boot/dts/suniv-f1c100s.dtsi +++ b/arch/arm/boot/dts/suniv-f1c100s.dtsi @@ -104,8 +104,10 @@ wdt: watchdog@1c20ca0 { compatible = "allwinner,suniv-f1c100s-wdt", - "allwinner,sun4i-a10-wdt"; + "allwinner,sun6i-a31-wdt"; reg = <0x01c20ca0 0x20>; + interrupts = <16>; + clocks = <&osc32k>; }; uart0: serial@1c25000 { diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi index 60a588ce45e1..049ca941b479 100644 --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi @@ -585,8 +585,8 @@ compatible = "socionext,uniphier-dwc3", "snps,dwc3"; status = "disabled"; reg = <0x65a00000 0xcd00>; - interrupt-names = "host", "peripheral"; - interrupts = <0 134 4>, <0 135 4>; + interrupt-names = "dwc_usb3"; + interrupts = <0 134 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>; clock-names = "ref", "bus_early", "suspend"; @@ -681,8 +681,8 @@ compatible = "socionext,uniphier-dwc3", "snps,dwc3"; status = "disabled"; reg = <0x65c00000 0xcd00>; - interrupt-names = "host", "peripheral"; - interrupts = <0 137 4>, <0 138 4>; + interrupt-names = "dwc_usb3"; + interrupts = <0 137 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>; clock-names = "ref", "bus_early", "suspend"; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts index d5b47d526f9e..7f1edc3ba6a1 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts @@ -132,6 +132,7 @@ reg = <0x2c0f0000 0x1000>; interrupts = <0 84 4>; cache-level = <2>; + cache-unified; }; pmu { |