ARM: ux500: move MMC/SD/SDIO pin control to the device tree

This moves the static, device-tied pin control configuration
out of the board file board-mop500-pins.c and into the device
tree. Add entries for SDI1 and SDI2 on the Snowball so that the
WLAN pins on SDI1 can be used further on, and the unused pins
on SDI2 can be put to sleep.

Cc: Lee Jones <lee.jones@linaro.org>
Cc: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

6 files changed, 314 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
index d2e63f3fb687..23583b0546d9 100644
--- a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
+++ b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
@@ -214,6 +214,217 @@
 					};
 				};
 			};
+
+			/* Settings for all MMC/SD/SDIO default and sleep states */
+			sdi0 {
+				/* This is the external SD card slot, 4 bits wide */
+				sdi0_default_mode: sdi0_default {
+					default_mux {
+						ste,function = "mc0";
+						ste,pins = "mc0_a_1";
+					};
+					default_cfg1 {
+						ste,pins =
+						"GPIO18_AC2", /* CMDDIR */
+						"GPIO19_AC1", /* DAT0DIR */
+						"GPIO20_AB4"; /* DAT2DIR */
+						ste,config = <&out_hi>;
+					};
+					default_cfg2 {
+						ste,pins = "GPIO22_AA3"; /* FBCLK */
+						ste,config = <&in_nopull>;
+					};
+					default_cfg3 {
+						ste,pins = "GPIO23_AA4"; /* CLK */
+						ste,config = <&out_lo>;
+					};
+					default_cfg4 {
+						ste,pins =
+						"GPIO24_AB2", /* CMD */
+						"GPIO25_Y4", /* DAT0 */
+						"GPIO26_Y2", /* DAT1 */
+						"GPIO27_AA2", /* DAT2 */
+						"GPIO28_AA1"; /* DAT3 */
+						ste,config = <&in_pu>;
+					};
+				};
+
+				sdi0_sleep_mode: sdi0_sleep {
+					sleep_cfg1 {
+						ste,pins =
+						"GPIO18_AC2", /* CMDDIR */
+						"GPIO19_AC1", /* DAT0DIR */
+						"GPIO20_AB4"; /* DAT2DIR */
+						ste,config = <&slpm_out_hi_wkup_pdis>;
+					};
+					sleep_cfg2 {
+						ste,pins =
+						"GPIO22_AA3", /* FBCLK */
+						"GPIO24_AB2", /* CMD */
+						"GPIO25_Y4", /* DAT0 */
+						"GPIO26_Y2", /* DAT1 */
+						"GPIO27_AA2", /* DAT2 */
+						"GPIO28_AA1"; /* DAT3 */
+						ste,config = <&slpm_in_wkup_pdis>;
+					};
+					sleep_cfg3 {
+						ste,pins = "GPIO23_AA4"; /* CLK */
+						ste,config = <&slpm_out_lo_wkup_pdis>;
+					};
+				};
+			};
+
+			sdi1 {
+				/* This is the WLAN SDIO 4 bits wide */
+				sdi1_default_mode: sdi1_default {
+					default_mux {
+						ste,function = "mc1";
+						ste,pins = "mc1_a_1";
+					};
+					default_cfg1 {
+						ste,pins = "GPIO208_AH16"; /* CLK */
+						ste,config = <&out_lo>;
+					};
+					default_cfg2 {
+						ste,pins = "GPIO209_AG15"; /* FBCLK */
+						ste,config = <&in_nopull>;
+					};
+					default_cfg3 {
+						ste,pins =
+						"GPIO210_AJ15", /* CMD */
+						"GPIO211_AG14", /* DAT0 */
+						"GPIO212_AF13", /* DAT1 */
+						"GPIO213_AG13", /* DAT2 */
+						"GPIO214_AH15"; /* DAT3 */
+						ste,config = <&in_pu>;
+					};
+				};
+
+				sdi1_sleep_mode: sdi1_sleep {
+					sleep_cfg1 {
+						ste,pins = "GPIO208_AH16"; /* CLK */
+						ste,config = <&slpm_out_lo_wkup_pdis>;
+					};
+					sleep_cfg2 {
+						ste,pins =
+						"GPIO209_AG15", /* FBCLK */
+						"GPIO210_AJ15", /* CMD */
+						"GPIO211_AG14", /* DAT0 */
+						"GPIO212_AF13", /* DAT1 */
+						"GPIO213_AG13", /* DAT2 */
+						"GPIO214_AH15"; /* DAT3 */
+						ste,config = <&slpm_in_wkup_pdis>;
+					};
+				};
+			};
+
+			sdi2 {
+				/* This is the eMMC 8 bits wide, usually PoP eMMC */
+				sdi2_default_mode: sdi2_default {
+					default_mux {
+						ste,function = "mc2";
+						ste,pins = "mc2_a_1";
+					};
+					default_cfg1 {
+						ste,pins = "GPIO128_A5"; /* CLK */
+						ste,config = <&out_lo>;
+					};
+					default_cfg2 {
+						ste,pins = "GPIO130_C8"; /* FBCLK */
+						ste,config = <&in_nopull>;
+					};
+					default_cfg3 {
+						ste,pins =
+						"GPIO129_B4", /* CMD */
+						"GPIO131_A12", /* DAT0 */
+						"GPIO132_C10", /* DAT1 */
+						"GPIO133_B10", /* DAT2 */
+						"GPIO134_B9", /* DAT3 */
+						"GPIO135_A9", /* DAT4 */
+						"GPIO136_C7", /* DAT5 */
+						"GPIO137_A7", /* DAT6 */
+						"GPIO138_C5"; /* DAT7 */
+						ste,config = <&in_pu>;
+					};
+				};
+
+				sdi2_sleep_mode: sdi2_sleep {
+					sleep_cfg1 {
+						ste,pins = "GPIO128_A5"; /* CLK */
+						ste,config = <&out_lo_wkup_pdis>;
+					};
+					sleep_cfg2 {
+						ste,pins =
+						"GPIO130_C8", /* FBCLK */
+						"GPIO129_B4"; /* CMD */
+						ste,config = <&in_wkup_pdis_en>;
+					};
+					sleep_cfg3 {
+						ste,pins =
+						"GPIO131_A12", /* DAT0 */
+						"GPIO132_C10", /* DAT1 */
+						"GPIO133_B10", /* DAT2 */
+						"GPIO134_B9", /* DAT3 */
+						"GPIO135_A9", /* DAT4 */
+						"GPIO136_C7", /* DAT5 */
+						"GPIO137_A7", /* DAT6 */
+						"GPIO138_C5"; /* DAT7 */
+						ste,config = <&in_wkup_pdis>;
+					};
+				};
+			};
+
+			sdi4 {
+				/* This is the eMMC 8 bits wide, usually PCB-mounted eMMC */
+				sdi4_default_mode: sdi4_default {
+					default_mux {
+						ste,function = "mc4";
+						ste,pins = "mc4_a_1";
+					};
+					default_cfg1 {
+						ste,pins = "GPIO203_AE23"; /* CLK */
+						ste,config = <&out_lo>;
+					};
+					default_cfg2 {
+						ste,pins = "GPIO202_AF25"; /* FBCLK */
+						ste,config = <&in_nopull>;
+					};
+					default_cfg3 {
+						ste,pins =
+						"GPIO201_AF24", /* CMD */
+						"GPIO200_AH26", /* DAT0 */
+						"GPIO199_AH23", /* DAT1 */
+						"GPIO198_AG25", /* DAT2 */
+						"GPIO197_AH24", /* DAT3 */
+						"GPIO207_AJ23", /* DAT4 */
+						"GPIO206_AG24", /* DAT5 */
+						"GPIO205_AG23", /* DAT6 */
+						"GPIO204_AF23"; /* DAT7 */
+						ste,config = <&in_pu>;
+					};
+				};
+
+				sdi4_sleep_mode: sdi4_sleep {
+					sleep_cfg1 {
+						ste,pins = "GPIO203_AE23"; /* CLK */
+						ste,config = <&out_lo_wkup_pdis>;
+					};
+					sleep_cfg2 {
+						ste,pins =
+						"GPIO202_AF25", /* FBCLK */
+						"GPIO201_AF24", /* CMD */
+						"GPIO200_AH26", /* DAT0 */
+						"GPIO199_AH23", /* DAT1 */
+						"GPIO198_AG25", /* DAT2 */
+						"GPIO197_AH24", /* DAT3 */
+						"GPIO207_AJ23", /* DAT4 */
+						"GPIO206_AG24", /* DAT5 */
+						"GPIO205_AG23", /* DAT6 */
+						"GPIO204_AF23"; /* DAT7 */
+						ste,config = <&slpm_in_wkup_pdis>;
+					};
+				};
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index 1863241c911e..845eb25f5d26 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -125,6 +125,9 @@
 			mmc-cap-mmc-highspeed;
 			vmmc-supply = <&ab8500_ldo_aux3_reg>;
 			vqmmc-supply = <&vmmci>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdi0_default_mode>;
+			pinctrl-1 = <&sdi0_sleep_mode>;
 
 			cd-gpios  = <&tc3589x_gpio 3 0x4>;
 
@@ -136,6 +139,9 @@
 			arm,primecell-periphid = <0x10480180>;
 			max-frequency = <100000000>;
 			bus-width = <4>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdi1_default_mode>;
+			pinctrl-1 = <&sdi1_sleep_mode>;
 
 			status = "okay";
 		};
@@ -146,6 +152,9 @@
 			max-frequency = <100000000>;
 			bus-width = <8>;
 			mmc-cap-mmc-highspeed;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdi2_default_mode>;
+			pinctrl-1 = <&sdi2_sleep_mode>;
 
 			status = "okay";
 		};
@@ -157,6 +166,9 @@
 			bus-width = <8>;
 			mmc-cap-mmc-highspeed;
 			vmmc-supply = <&ab8500_ldo_aux2_reg>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdi4_default_mode>;
+			pinctrl-1 = <&sdi4_sleep_mode>;
 
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi
index 6b271a410d03..cfd7ef306d49 100644
--- a/arch/arm/boot/dts/ste-hrefprev60.dtsi
+++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi
@@ -55,5 +55,22 @@
 
 			status = "okay";
 		};
+
+		pinctrl {
+			sdi0 {
+				/* This additional pin needed on early MOP500 and HREFs previous to v60 */
+				sdi0_default_mode: sdi0_default {
+					hrefprev60_mux {
+						ste,function = "mc0";
+						ste,pins = "mc0dat31dir_a_1";
+					};
+					hrefprev60_cfg1 {
+						ste,pins = "GPIO21_AB3"; /* DAT31DIR */
+						ste,config = <&out_hi>;
+					};
+
+				};
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
index aed511b47a9e..452f00c4f7c0 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi
+++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
@@ -66,5 +66,17 @@
 
 			status = "okay";
 		};
+
+		pinctrl {
+			sdi0 {
+				/* SD card detect GPIO pin, extend default state */
+				sdi0_default_mode: sdi0_default {
+					default_hrefv60_cfg1 {
+						ste,pins = "GPIO95_E8";
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi b/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi
index efddee9403c4..f213222cf220 100644
--- a/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi
@@ -68,6 +68,13 @@
 		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
 	};
 
+	slpm_out_lo_wkup_pdis: slpm_out_lo_wkup_pdis {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-output = <SLPM_OUTPUT_LOW>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+
 	slpm_out_wkup_pdis: slpm_out_wkup_pdis {
 		ste,sleep = <SLPM_ENABLED>;
 		ste,sleep-output = <SLPM_DIR_OUTPUT>;
@@ -81,6 +88,18 @@
 		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
 	};
 
+	in_wkup_pdis_en: in_wkup_pdis_en {
+		ste,sleep-input = <SLPM_DIR_INPUT>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_ENABLED>;
+	};
+
+	out_lo_wkup_pdis: out_lo_wkup_pdis {
+		ste,sleep-output = <SLPM_OUTPUT_LOW>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+
 	out_hi_wkup_pdis: out_hi_wkup_pdis {
 		ste,sleep-output = <SLPM_OUTPUT_HIGH>;
 		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index f8df43e0791d..c2cb3ea637dc 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -137,6 +137,9 @@
 			mmc-cap-mmc-highspeed;
 			vmmc-supply = <&ab8500_ldo_aux3_reg>;
 			vqmmc-supply = <&vmmci>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdi0_default_mode>;
+			pinctrl-1 = <&sdi0_sleep_mode>;
 
 			cd-gpios  = <&gpio6 26 0x4>; // 218
 			cd-inverted;
@@ -144,6 +147,27 @@
 			status = "okay";
 		};
 
+		// WLAN SDIO channel
+		sdi1_per2@80118000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <100000000>;
+			bus-width = <4>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdi1_default_mode>;
+			pinctrl-1 = <&sdi1_sleep_mode>;
+
+			status = "okay";
+		};
+
+		// Unused PoP eMMC - register and put it to sleep by default */
+		sdi2_per3@80005000 {
+			arm,primecell-periphid = <0x10480180>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&sdi2_sleep_mode>;
+
+			status = "okay";
+		};
+
 		// On-board eMMC
 		sdi4_per2@80114000 {
 			arm,primecell-periphid = <0x10480180>;
@@ -151,6 +175,9 @@
 			bus-width = <8>;
 			mmc-cap-mmc-highspeed;
 			vmmc-supply = <&ab8500_ldo_aux2_reg>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdi4_default_mode>;
+			pinctrl-1 = <&sdi4_sleep_mode>;
 
 			status = "okay";
 		};
@@ -300,5 +327,21 @@
 				};
 			};
 		};
+
+		pinctrl {
+			sdi0 {
+				sdi0_default_mode: sdi0_default {
+					snowball_mux {
+						ste,function = "mc0";
+						ste,pins = "mc0dat31dir_a_1";
+					};
+					snowball_cfg1 {
+						ste,pins = "GPIO21_AB3"; /* DAT31DIR */
+						ste,config = <&out_hi>;
+					};
+
+				};
+			};
+		};
 	};
 };