ENGR00117735-1 MX28: SLC/MLC NAND

Port the i.MX23 NAND Flash driver to i.MX28.

Signed-off-by: Patrick Turley <patrick.turley@freescale.com>
Signed-off-by: Alejandro Gonzalez <alex.gonzalez@digi.com>

2 files changed, 381 insertions, 114 deletions

diff --git a/arch/arm/mach-mx28/device.c b/arch/arm/mach-mx28/device.c
index d8cbba1b9621..d63055ae916c 100644
--- a/arch/arm/mach-mx28/device.c
+++ b/arch/arm/mach-mx28/device.c
@@ -295,6 +295,76 @@ static void __init mx28_init_i2c(void)
 }
 #endif
 
+
+#if defined(CONFIG_MTD_NAND_GPMI1)
+
+extern int enable_gpmi;
+
+static int gpmi_pinmux_handler(void)
+{
+	return !enable_gpmi;
+}
+
+static const char *gpmi_partition_source_types[] = { "cmdlinepart", 0 };
+
+static struct gpmi_platform_data  gpmi_platform_data = {
+	.io_uA                   = 70000,
+	.min_prop_delay_in_ns    = 5,
+	.max_prop_delay_in_ns    = 9,
+	.pinmux_handler          = gpmi_pinmux_handler,
+	.boot_area_size_in_bytes = 20 * SZ_1M,
+	.partitions              = 0,
+	.partition_count         = 0,
+	.partition_source_types  = gpmi_partition_source_types,
+};
+
+static struct resource gpmi_resources[] = {
+	{
+	 .flags = IORESOURCE_MEM,
+	 .start = GPMI_PHYS_ADDR,
+	 .end   = GPMI_PHYS_ADDR + SZ_8K - 1,
+	 },
+	{
+	 .flags = IORESOURCE_IRQ,
+	 .start = IRQ_GPMI_DMA,
+	 .end   = IRQ_GPMI_DMA,
+	 },
+	{
+	 .flags = IORESOURCE_DMA,
+	 .start	= MXS_DMA_CHANNEL_AHB_APBH_GPMI0,
+	 .end	= MXS_DMA_CHANNEL_AHB_APBH_GPMI7,
+	 },
+	{
+	 .flags = IORESOURCE_MEM,
+	 .start = BCH_PHYS_ADDR,
+	 .end   = BCH_PHYS_ADDR + SZ_8K - 1,
+	 },
+	{
+	 .flags = IORESOURCE_IRQ,
+	 .start = IRQ_BCH,
+	 .end   = IRQ_BCH,
+	 },
+};
+
+static void __init mx28_init_gpmi(void)
+{
+	struct platform_device  *pdev;
+
+	pdev = mxs_get_device("gpmi", 0);
+	if (pdev == NULL || IS_ERR(pdev))
+		return;
+	pdev->dev.platform_data = &gpmi_platform_data;
+	pdev->resource          = gpmi_resources;
+	pdev->num_resources     = ARRAY_SIZE(gpmi_resources);
+	mxs_add_device(pdev, 1);
+}
+#else
+static void mx28_init_gpmi(void)
+{
+}
+#endif
+
+
 #if defined(CONFIG_MMC_MXS) || defined(CONFIG_MMC_MXS_MODULE)
 #if defined(CONFIG_MACH_MX28EVK)
 #define MMC0_POWER	MXS_PIN_TO_GPIO(PINID_PWM3)
@@ -1102,6 +1172,7 @@ int __init mx28_device_init(void)
 	mx28_init_lradc();
 	mx28_init_auart();
 	mx28_init_mmc();
+	mx28_init_gpmi();
 	mx28_init_wdt();
 	mx28_init_rtc();
 	mx28_init_fec();
diff --git a/arch/arm/mach-mx28/mx28evk_pins.c b/arch/arm/mach-mx28/mx28evk_pins.c
index e8ac2d2b5328..2bb8c5826c2f 100644
--- a/arch/arm/mach-mx28/mx28evk_pins.c
+++ b/arch/arm/mach-mx28/mx28evk_pins.c
@@ -521,117 +521,6 @@ static struct pin_desc mx28evk_fixed_pins[] = {
 	 .drive 	= 1,
 	 .pull 		= 0,
 	 },
-	/* Configurations of SSP1 SD/MMC port pins */
-	{
-	 .name	= "SSP1_DATA0",
-	 .id	= PINID_GPMI_D00,
-	 .fun	= PIN_FUN2,
-	 .strength	= PAD_8MA,
-	 .voltage	= PAD_3_3V,
-	 .pullup	= 1,
-	 .drive 	= 1,
-	 .pull 		= 1,
-	 },
-	{
-	 .name	= "SSP1_DATA1",
-	 .id	= PINID_GPMI_D01,
-	 .fun	= PIN_FUN2,
-	 .strength	= PAD_8MA,
-	 .voltage	= PAD_3_3V,
-	 .pullup	= 1,
-	 .drive 	= 1,
-	 .pull 		= 1,
-	 },
-	{
-	 .name	= "SSP1_DATA2",
-	 .id	= PINID_GPMI_D02,
-	 .fun	= PIN_FUN2,
-	 .strength	= PAD_8MA,
-	 .voltage	= PAD_3_3V,
-	 .pullup	= 1,
-	 .drive 	= 1,
-	 .pull 		= 1,
-	 },
-	{
-	 .name	= "SSP1_DATA3",
-	 .id	= PINID_GPMI_D03,
-	 .fun	= PIN_FUN2,
-	 .strength	= PAD_8MA,
-	 .voltage	= PAD_3_3V,
-	 .pullup	= 1,
-	 .drive 	= 1,
-	 .pull 		= 1,
-	 },
-	{
-	 .name	= "SSP1_DATA4",
-	 .id	= PINID_GPMI_D04,
-	 .fun	= PIN_FUN2,
-	 .strength	= PAD_8MA,
-	 .voltage	= PAD_3_3V,
-	 .pullup	= 1,
-	 .drive 	= 1,
-	 .pull 		= 1,
-	 },
-	{
-	 .name	= "SSP1_DATA5",
-	 .id	= PINID_GPMI_D05,
-	 .fun	= PIN_FUN2,
-	 .strength	= PAD_8MA,
-	 .voltage	= PAD_3_3V,
-	 .pullup	= 1,
-	 .drive 	= 1,
-	 .pull 		= 1,
-	 },
-	{
-	 .name	= "SSP1_DATA6",
-	 .id	= PINID_GPMI_D06,
-	 .fun	= PIN_FUN2,
-	 .strength	= PAD_8MA,
-	 .voltage	= PAD_3_3V,
-	 .pullup	= 1,
-	 .drive 	= 1,
-	 .pull 		= 1,
-	 },
-	{
-	 .name	= "SSP1_DATA7",
-	 .id	= PINID_GPMI_D07,
-	 .fun	= PIN_FUN2,
-	 .strength	= PAD_8MA,
-	 .voltage	= PAD_3_3V,
-	 .pullup	= 1,
-	 .drive 	= 1,
-	 .pull 		= 1,
-	 },
-	{
-	 .name	= "SSP1_CMD",
-	 .id	= PINID_GPMI_RDY1,
-	 .fun	= PIN_FUN2,
-	 .strength	= PAD_8MA,
-	 .voltage	= PAD_3_3V,
-	 .pullup	= 1,
-	 .drive 	= 1,
-	 .pull 		= 1,
-	 },
-	{
-	 .name	= "SSP1_DETECT",
-	 .id	= PINID_GPMI_RDY0,
-	 .fun	= PIN_FUN1,
-	 .strength	= PAD_8MA,
-	 .voltage	= PAD_3_3V,
-	 .pullup	= 0,
-	 .drive 	= 1,
-	 .pull 		= 0,
-	 },
-	{
-	 .name	= "SSP1_SCK",
-	 .id	= PINID_GPMI_WRN,
-	 .fun	= PIN_FUN2,
-	 .strength	= PAD_8MA,
-	 .voltage	= PAD_3_3V,
-	 .pullup	= 0,
-	 .drive 	= 1,
-	 .pull 		= 0,
-	 },
 #endif
 
 #if defined(CONFIG_FEC) || defined(CONFIG_FEC_MODULE)
@@ -806,6 +695,295 @@ static struct pin_desc mx28evk_fixed_pins[] = {
 #endif
 };
 
+
+static int __initdata enable_ssp1 = { 0 };
+static int __init ssp1_setup(char *__unused)
+{
+	enable_ssp1 = 1;
+	return 1;
+}
+
+__setup("ssp1", ssp1_setup);
+
+static struct pin_desc mx28evk_ssp1_pins[] = {
+	{
+	 .name	= "SSP1_DATA0",
+	 .id	= PINID_GPMI_D00,
+	 .fun	= PIN_FUN2,
+	 .strength	= PAD_8MA,
+	 .voltage	= PAD_3_3V,
+	 .pullup	= 1,
+	 .drive 	= 1,
+	 .pull 		= 1,
+	 },
+	{
+	 .name	= "SSP1_DATA1",
+	 .id	= PINID_GPMI_D01,
+	 .fun	= PIN_FUN2,
+	 .strength	= PAD_8MA,
+	 .voltage	= PAD_3_3V,
+	 .pullup	= 1,
+	 .drive 	= 1,
+	 .pull 		= 1,
+	 },
+	{
+	 .name	= "SSP1_DATA2",
+	 .id	= PINID_GPMI_D02,
+	 .fun	= PIN_FUN2,
+	 .strength	= PAD_8MA,
+	 .voltage	= PAD_3_3V,
+	 .pullup	= 1,
+	 .drive 	= 1,
+	 .pull 		= 1,
+	 },
+	{
+	 .name	= "SSP1_DATA3",
+	 .id	= PINID_GPMI_D03,
+	 .fun	= PIN_FUN2,
+	 .strength	= PAD_8MA,
+	 .voltage	= PAD_3_3V,
+	 .pullup	= 1,
+	 .drive 	= 1,
+	 .pull 		= 1,
+	 },
+	{
+	 .name	= "SSP1_DATA4",
+	 .id	= PINID_GPMI_D04,
+	 .fun	= PIN_FUN2,
+	 .strength	= PAD_8MA,
+	 .voltage	= PAD_3_3V,
+	 .pullup	= 1,
+	 .drive 	= 1,
+	 .pull 		= 1,
+	 },
+	{
+	 .name	= "SSP1_DATA5",
+	 .id	= PINID_GPMI_D05,
+	 .fun	= PIN_FUN2,
+	 .strength	= PAD_8MA,
+	 .voltage	= PAD_3_3V,
+	 .pullup	= 1,
+	 .drive 	= 1,
+	 .pull 		= 1,
+	 },
+	{
+	 .name	= "SSP1_DATA6",
+	 .id	= PINID_GPMI_D06,
+	 .fun	= PIN_FUN2,
+	 .strength	= PAD_8MA,
+	 .voltage	= PAD_3_3V,
+	 .pullup	= 1,
+	 .drive 	= 1,
+	 .pull 		= 1,
+	 },
+	{
+	 .name	= "SSP1_DATA7",
+	 .id	= PINID_GPMI_D07,
+	 .fun	= PIN_FUN2,
+	 .strength	= PAD_8MA,
+	 .voltage	= PAD_3_3V,
+	 .pullup	= 1,
+	 .drive 	= 1,
+	 .pull 		= 1,
+	 },
+	{
+	 .name	= "SSP1_CMD",
+	 .id	= PINID_GPMI_RDY1,
+	 .fun	= PIN_FUN2,
+	 .strength	= PAD_8MA,
+	 .voltage	= PAD_3_3V,
+	 .pullup	= 1,
+	 .drive 	= 1,
+	 .pull 		= 1,
+	 },
+	{
+	 .name	= "SSP1_DETECT",
+	 .id	= PINID_GPMI_RDY0,
+	 .fun	= PIN_FUN1,
+	 .strength	= PAD_8MA,
+	 .voltage	= PAD_3_3V,
+	 .pullup	= 0,
+	 .drive 	= 1,
+	 .pull 		= 0,
+	 },
+	{
+	 .name	= "SSP1_SCK",
+	 .id	= PINID_GPMI_WRN,
+	 .fun	= PIN_FUN2,
+	 .strength	= PAD_8MA,
+	 .voltage	= PAD_3_3V,
+	 .pullup	= 0,
+	 .drive 	= 1,
+	 .pull 		= 0,
+	 },
+};
+
+
+int __initdata enable_gpmi = { 0 };
+static int __init gpmi_setup(char *__unused)
+{
+	enable_gpmi = 1;
+	return 1;
+}
+
+__setup("gpmi", gpmi_setup);
+
+static struct pin_desc mx28evk_gpmi_pins[] = {
+	{
+	 .name     = "GPMI D0",
+	 .id       = PINID_GPMI_D00,
+	 .fun      = PIN_FUN1,
+	 .strength = PAD_4MA,
+	 .voltage  = PAD_3_3V,
+	 .pullup   = 0,
+	 .drive    = !0
+	 },
+	{
+	.name     = "GPMI D1",
+	.id       = PINID_GPMI_D01,
+	.fun      = PIN_FUN1,
+	.strength = PAD_4MA,
+	.voltage  = PAD_3_3V,
+	.pullup   = 0,
+	.drive    = !0
+	 },
+	{
+	 .name     = "GPMI D2",
+	 .id       = PINID_GPMI_D02,
+	 .fun      = PIN_FUN1,
+	 .strength = PAD_4MA,
+	 .voltage  = PAD_3_3V,
+	 .pullup   = 0,
+	 .drive    = !0
+	 },
+	{
+	 .name     = "GPMI D3",
+	 .id       = PINID_GPMI_D03,
+	 .fun      = PIN_FUN1,
+	 .strength = PAD_4MA,
+	 .voltage  = PAD_3_3V,
+	 .pullup   = 0,
+	 .drive    = !0
+	 },
+	{
+	 .name     = "GPMI D4",
+	 .id       = PINID_GPMI_D04,
+	 .fun      = PIN_FUN1,
+	 .strength = PAD_4MA,
+	 .voltage  = PAD_3_3V,
+	 .pullup   = 0,
+	 .drive    = !0
+	 },
+	{
+	 .name     = "GPMI D5",
+	 .id       = PINID_GPMI_D05,
+	 .fun      = PIN_FUN1,
+	 .strength = PAD_4MA,
+	 .voltage  = PAD_3_3V,
+	 .pullup   = 0,
+	 .drive    = !0
+	 },
+	{
+	 .name     = "GPMI D6",
+	 .id       = PINID_GPMI_D06,
+	 .fun      = PIN_FUN1,
+	 .strength = PAD_4MA,
+	 .voltage  = PAD_3_3V,
+	 .pullup   = 0,
+	 .drive    = !0
+	 },
+	{
+	 .name     = "GPMI D7",
+	 .id       = PINID_GPMI_D07,
+	 .fun      = PIN_FUN1,
+	 .strength = PAD_4MA,
+	 .voltage  = PAD_3_3V,
+	 .pullup   = 0,
+	 .drive    = !0
+	 },
+	{
+	 .name     = "GPMI CE0-",
+	 .id       = PINID_GPMI_CE0N,
+	 .fun      = PIN_FUN1,
+	 .strength = PAD_4MA,
+	 .voltage  = PAD_3_3V,
+	 .pullup   = 0,
+	 .drive    = !0
+	 },
+	{
+	 .name     = "GPMI CE1-",
+	 .id       = PINID_GPMI_CE1N,
+	 .fun      = PIN_FUN1,
+	 .strength = PAD_4MA,
+	 .voltage  = PAD_3_3V,
+	 .pullup   = 0,
+	 .drive    = !0
+	 },
+	{
+	 .name     = "GPMI RDY0",
+	 .id       = PINID_GPMI_RDY0,
+	 .fun      = PIN_FUN1,
+	 .strength = PAD_4MA,
+	 .voltage  = PAD_3_3V,
+	 .pullup   = 0,
+	 .drive    = !0
+	 },
+	{
+	 .name     = "GPMI RDY1",
+	 .id       = PINID_GPMI_RDY1,
+	 .fun      = PIN_FUN1,
+	 .strength = PAD_4MA,
+	 .voltage  = PAD_3_3V,
+	 .pullup   = 0,
+	 .drive    = !0
+	 },
+	{
+	 .name     = "GPMI RD-",
+	 .id       = PINID_GPMI_RDN,
+	 .fun      = PIN_FUN1,
+	 .strength = PAD_12MA,
+	 .voltage  = PAD_3_3V,
+	 .pullup   = 0,
+	 .drive    = !0
+	 },
+	{
+	 .name     = "GPMI WR-",
+	 .id       = PINID_GPMI_WRN,
+	 .fun      = PIN_FUN1,
+	 .strength = PAD_12MA,
+	 .voltage  = PAD_3_3V,
+	 .pullup   = 0,
+	 .drive    = !0
+	 },
+	{
+	 .name     = "GPMI ALE",
+	 .id       = PINID_GPMI_ALE,
+	 .fun      = PIN_FUN1,
+	 .strength = PAD_4MA,
+	 .voltage  = PAD_3_3V,
+	 .pullup   = 0,
+	 .drive    = !0
+	 },
+	{
+	 .name     = "GPMI CLE",
+	 .id       = PINID_GPMI_CLE,
+	 .fun      = PIN_FUN1,
+	 .strength = PAD_4MA,
+	 .voltage  = PAD_3_3V,
+	 .pullup   = 0,
+	 .drive    = !0
+	 },
+	{
+	 .name     = "GPMI RST-",
+	 .id       = PINID_GPMI_RESETN,
+	 .fun      = PIN_FUN1,
+	 .strength = PAD_12MA,
+	 .voltage  = PAD_3_3V,
+	 .pullup   = 0,
+	 .drive    = !0
+	 },
+};
+
 #if defined(CONFIG_FEC) || defined(CONFIG_FEC_MODULE)
 int mx28evk_enet_gpio_init(void)
 {
@@ -827,12 +1005,12 @@ int mx28evk_enet_gpio_init(void)
 }
 #endif
 
-void __init mx28evk_pins_init(void)
+void __init mx28evk_init_pin_group(struct pin_desc *pins, unsigned count)
 {
 	int i;
 	struct pin_desc *pin;
-	for (i = 0; i < ARRAY_SIZE(mx28evk_fixed_pins); i++) {
-		pin = &mx28evk_fixed_pins[i];
+	for (i = 0; i < count; i++) {
+		pin = pins + i;
 		if (pin->fun == PIN_GPIO)
 			gpio_request(MXS_PIN_TO_GPIO(pin->id), pin->name);
 		else
@@ -852,3 +1030,21 @@ void __init mx28evk_pins_init(void)
 		}
 	}
 }
+
+void __init mx28evk_pins_init(void)
+{
+
+	mx28evk_init_pin_group(mx28evk_fixed_pins,
+						ARRAY_SIZE(mx28evk_fixed_pins));
+
+	if (enable_ssp1) {
+		pr_info("Initializing SSP1 pins\n");
+		mx28evk_init_pin_group(mx28evk_ssp1_pins,
+						ARRAY_SIZE(mx28evk_ssp1_pins));
+	} else if (enable_gpmi) {
+		pr_info("Initializing GPMI pins\n");
+		mx28evk_init_pin_group(mx28evk_gpmi_pins,
+						ARRAY_SIZE(mx28evk_gpmi_pins));
+	}
+
+}