summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap1
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@woody.linux-foundation.org>2007-10-15 16:08:50 -0700
committerLinus Torvalds <torvalds@woody.linux-foundation.org>2007-10-15 16:08:50 -0700
commit65a6ec0d72a07f16719e9b7a96e1c4bae044b591 (patch)
tree344e03a5039a44982c1b78d6113633b21b434820 /arch/arm/mach-omap1
parent541010e4b8921cd781ff02ae68028501457045b6 (diff)
parent0181b61a988424b5cc44fe09e6968142359c815e (diff)
Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (95 commits) [ARM] 4578/1: CM-x270: PCMCIA support [ARM] 4577/1: ITE 8152 PCI bridge support [ARM] 4576/1: CM-X270 machine support [ARM] pxa: Avoid pxa_gpio_mode() in gpio_direction_{in,out}put() [ARM] pxa: move pxa_set_mode() from pxa2xx_mainstone.c to mainstone.c [ARM] pxa: move pxa_set_mode() from pxa2xx_lubbock.c to lubbock.c [ARM] pxa: Make cpu_is_pxaXXX dependent on configuration symbols [ARM] pxa: PXA3xx base support [NET] smc91x: fix PXA DMA support code [SERIAL] Fix console initialisation ordering [ARM] pxa: tidy up arch/arm/mach-pxa/Makefile [ARM] Update arch/arm/Kconfig for drivers/Kconfig changes [ARM] 4600/1: fix kernel build failure with build-id-supporting binutils [ARM] 4599/1: Preserve ATAG list for use with kexec (2.6.23) [ARM] Rename consistent_sync() as dma_cache_maint() [ARM] 4572/1: ep93xx: add cirrus logic edb9307 support [ARM] 4596/1: S3C2412: Correct IRQs for SDI+CF and add decoding support [ARM] 4595/1: ns9xxx: define registers as void __iomem * instead of volatile u32 [ARM] 4594/1: ns9xxx: use the new gpio functions [ARM] 4593/1: ns9xxx: implement generic clockevents ...
Diffstat (limited to 'arch/arm/mach-omap1')
-rw-r--r--arch/arm/mach-omap1/Kconfig38
-rw-r--r--arch/arm/mach-omap1/Makefile3
-rw-r--r--arch/arm/mach-omap1/board-ams-delta.c120
-rw-r--r--arch/arm/mach-omap1/board-h2.c79
-rw-r--r--arch/arm/mach-omap1/board-h3.c41
-rw-r--r--arch/arm/mach-omap1/board-nokia770.c98
-rw-r--r--arch/arm/mach-omap1/board-osk.c55
-rw-r--r--arch/arm/mach-omap1/board-palmte.c377
-rw-r--r--arch/arm/mach-omap1/board-palmtt.c357
-rw-r--r--arch/arm/mach-omap1/board-palmz71.c383
-rw-r--r--arch/arm/mach-omap1/board-sx1.c494
-rw-r--r--arch/arm/mach-omap1/board-voiceblue.c2
-rw-r--r--arch/arm/mach-omap1/clock.c34
-rw-r--r--arch/arm/mach-omap1/clock.h35
-rw-r--r--arch/arm/mach-omap1/leds-innovator.c3
-rw-r--r--arch/arm/mach-omap1/mux.c24
-rw-r--r--arch/arm/mach-omap1/pm.c5
17 files changed, 2099 insertions, 49 deletions
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index f6ecdd3a2478..79f0b1f8497b 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -84,11 +84,39 @@ config MACH_OMAP_PALMTE
bool "Palm Tungsten E"
depends on ARCH_OMAP1 && ARCH_OMAP15XX
help
- Support for the Palm Tungsten E PDA. Currently only the LCD panel
- is supported. To boot the kernel, you'll need a PalmOS compatible
- bootloader; check out http://palmtelinux.sourceforge.net for more
- information.
- Say Y here if you have such a PDA, say NO otherwise.
+ Support for the Palm Tungsten E PDA. To boot the kernel, you'll
+ need a PalmOS compatible bootloader; check out
+ http://palmtelinux.sourceforge.net/ for more information.
+ Say Y here if you have this PDA model, say N otherwise.
+
+config MACH_OMAP_PALMZ71
+ bool "Palm Zire71"
+ depends on ARCH_OMAP1 && ARCH_OMAP15XX
+ help
+ Support for the Palm Zire71 PDA. To boot the kernel,
+ you'll need a PalmOS compatible bootloader; check out
+ http://hackndev.com/palm/z71 for more informations.
+ Say Y here if you have such a PDA, say N otherwise.
+
+config MACH_OMAP_PALMTT
+ bool "Palm Tungsten|T"
+ depends on ARCH_OMAP1 && ARCH_OMAP15XX
+ help
+ Support for the Palm Tungsten|T PDA. To boot the kernel, you'll
+ need a PalmOS compatible bootloader (Garux); check out
+ http://www.hackndev.com/palm/tt/ for more information.
+ Say Y here if you have this PDA model, say N otherwise.
+
+config MACH_SX1
+ bool "Siemens SX1"
+ depends on ARCH_OMAP1 && ARCH_OMAP15XX
+ help
+ Support for the Siemens SX1 phone. To boot the kernel,
+ you'll need a SX1 compatible bootloader; check out
+ http://forum.oslik.ru and
+ http://www.handhelds.org/moin/moin.cgi/SiemensSX1
+ for more information.
+ Say Y here if you have such a phone, say NO otherwise.
config MACH_NOKIA770
bool "Nokia 770"
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index a8b9a00cea22..391b6f4827f6 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -22,8 +22,11 @@ obj-$(CONFIG_MACH_OMAP_OSK) += board-osk.o
obj-$(CONFIG_MACH_OMAP_H3) += board-h3.o
obj-$(CONFIG_MACH_VOICEBLUE) += board-voiceblue.o
obj-$(CONFIG_MACH_OMAP_PALMTE) += board-palmte.o
+obj-$(CONFIG_MACH_OMAP_PALMZ71) += board-palmz71.o
+obj-$(CONFIG_MACH_OMAP_PALMTT) += board-palmtt.o
obj-$(CONFIG_MACH_NOKIA770) += board-nokia770.o
obj-$(CONFIG_MACH_AMS_DELTA) += board-ams-delta.o
+obj-$(CONFIG_MACH_SX1) += board-sx1.o
ifeq ($(CONFIG_ARCH_OMAP15XX),y)
# Innovator-1510 FPGA
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 8437d065ada5..c73ca61e585e 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -14,6 +14,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/input.h>
#include <linux/platform_device.h>
#include <asm/hardware.h>
@@ -23,6 +24,7 @@
#include <asm/arch/board-ams-delta.h>
#include <asm/arch/gpio.h>
+#include <asm/arch/keypad.h>
#include <asm/arch/mux.h>
#include <asm/arch/usb.h>
#include <asm/arch/board.h>
@@ -31,6 +33,86 @@
static u8 ams_delta_latch1_reg;
static u16 ams_delta_latch2_reg;
+static int ams_delta_keymap[] = {
+ KEY(0, 0, KEY_F1), /* Advert */
+
+ KEY(3, 0, KEY_COFFEE), /* Games */
+ KEY(2, 0, KEY_QUESTION), /* Directory */
+ KEY(3, 2, KEY_CONNECT), /* Internet */
+ KEY(2, 1, KEY_SHOP), /* Services */
+ KEY(1, 1, KEY_PHONE), /* VoiceMail */
+
+ KEY(1, 0, KEY_DELETE), /* Delete */
+ KEY(2, 2, KEY_PLAY), /* Play */
+ KEY(0, 1, KEY_PAGEUP), /* Up */
+ KEY(3, 1, KEY_PAGEDOWN), /* Down */
+ KEY(0, 2, KEY_EMAIL), /* ReadEmail */
+ KEY(1, 2, KEY_STOP), /* Stop */
+
+ /* Numeric keypad portion */
+ KEY(7, 0, KEY_KP1),
+ KEY(6, 0, KEY_KP2),
+ KEY(5, 0, KEY_KP3),
+ KEY(7, 1, KEY_KP4),
+ KEY(6, 1, KEY_KP5),
+ KEY(5, 1, KEY_KP6),
+ KEY(7, 2, KEY_KP7),
+ KEY(6, 2, KEY_KP8),
+ KEY(5, 2, KEY_KP9),
+ KEY(6, 3, KEY_KP0),
+ KEY(7, 3, KEY_KPASTERISK),
+ KEY(5, 3, KEY_KPDOT), /* # key */
+ KEY(2, 7, KEY_NUMLOCK), /* Mute */
+ KEY(1, 7, KEY_KPMINUS), /* Recall */
+ KEY(1, 6, KEY_KPPLUS), /* Redial */
+ KEY(6, 7, KEY_KPSLASH), /* Handsfree */
+ KEY(0, 6, KEY_ENTER), /* Video */
+
+ KEY(4, 7, KEY_CAMERA), /* Photo */
+
+ KEY(4, 0, KEY_F2), /* Home */
+ KEY(4, 1, KEY_F3), /* Office */
+ KEY(4, 2, KEY_F4), /* Mobile */
+ KEY(7, 7, KEY_F5), /* SMS */
+ KEY(5, 7, KEY_F6), /* Email */
+
+ /* QWERTY portion of keypad */
+ KEY(4, 3, KEY_Q),
+ KEY(3, 3, KEY_W),
+ KEY(2, 3, KEY_E),
+ KEY(1, 3, KEY_R),
+ KEY(0, 3, KEY_T),
+ KEY(7, 4, KEY_Y),
+ KEY(6, 4, KEY_U),
+ KEY(5, 4, KEY_I),
+ KEY(4, 4, KEY_O),
+ KEY(3, 4, KEY_P),
+
+ KEY(2, 4, KEY_A),
+ KEY(1, 4, KEY_S),
+ KEY(0, 4, KEY_D),
+ KEY(7, 5, KEY_F),
+ KEY(6, 5, KEY_G),
+ KEY(5, 5, KEY_H),
+ KEY(4, 5, KEY_J),
+ KEY(3, 5, KEY_K),
+ KEY(2, 5, KEY_L),
+
+ KEY(1, 5, KEY_Z),
+ KEY(0, 5, KEY_X),
+ KEY(7, 6, KEY_C),
+ KEY(6, 6, KEY_V),
+ KEY(5, 6, KEY_B),
+ KEY(4, 6, KEY_N),
+ KEY(3, 6, KEY_M),
+ KEY(2, 6, KEY_SPACE),
+
+ KEY(0, 7, KEY_LEFTSHIFT), /* Vol up */
+ KEY(3, 7, KEY_LEFTCTRL), /* Vol down */
+
+ 0
+};
+
void ams_delta_latch1_write(u8 mask, u8 value)
{
ams_delta_latch1_reg &= ~mask;
@@ -76,6 +158,10 @@ static struct map_desc ams_delta_io_desc[] __initdata = {
}
};
+static struct omap_lcd_config ams_delta_lcd_config __initdata = {
+ .ctrl_name = "internal",
+};
+
static struct omap_uart_config ams_delta_uart_config __initdata = {
.enabled_uarts = 1,
};
@@ -87,16 +173,50 @@ static struct omap_usb_config ams_delta_usb_config __initdata = {
};
static struct omap_board_config_kernel ams_delta_config[] = {
+ { OMAP_TAG_LCD, &ams_delta_lcd_config },
{ OMAP_TAG_UART, &ams_delta_uart_config },
{ OMAP_TAG_USB, &ams_delta_usb_config },
};
+static struct resource ams_delta_kp_resources[] = {
+ [0] = {
+ .start = INT_KEYBOARD,
+ .end = INT_KEYBOARD,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct omap_kp_platform_data ams_delta_kp_data = {
+ .rows = 8,
+ .cols = 8,
+ .keymap = ams_delta_keymap,
+ .keymapsize = ARRAY_SIZE(ams_delta_keymap),
+ .delay = 9,
+};
+
+static struct platform_device ams_delta_kp_device = {
+ .name = "omap-keypad",
+ .id = -1,
+ .dev = {
+ .platform_data = &ams_delta_kp_data,
+ },
+ .num_resources = ARRAY_SIZE(ams_delta_kp_resources),
+ .resource = ams_delta_kp_resources,
+};
+
+static struct platform_device ams_delta_lcd_device = {
+ .name = "lcd_ams_delta",
+ .id = -1,
+};
+
static struct platform_device ams_delta_led_device = {
.name = "ams-delta-led",
.id = -1
};
static struct platform_device *ams_delta_devices[] __initdata = {
+ &ams_delta_kp_device,
+ &ams_delta_lcd_device,
&ams_delta_led_device,
};
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 2f8f6ecf111f..b0921622566f 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -140,6 +140,66 @@ static struct platform_device h2_nor_device = {
.resource = &h2_nor_resource,
};
+#if 0 /* REVISIT: Enable when nand_platform_data is applied */
+
+static struct mtd_partition h2_nand_partitions[] = {
+#if 0
+ /* REVISIT: enable these partitions if you make NAND BOOT
+ * work on your H2 (rev C or newer); published versions of
+ * x-load only support P2 and H3.
+ */
+ {
+ .name = "xloader",
+ .offset = 0,
+ .size = 64 * 1024,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ {
+ .name = "bootloader",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 256 * 1024,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ {
+ .name = "params",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 192 * 1024,
+ },
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 2 * SZ_1M,
+ },
+#endif
+ {
+ .name = "filesystem",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND,
+ },
+};
+
+/* dip switches control NAND chip access: 8 bit, 16 bit, or neither */
+static struct nand_platform_data h2_nand_data = {
+ .options = NAND_SAMSUNG_LP_OPTIONS,
+ .parts = h2_nand_partitions,
+ .nr_parts = ARRAY_SIZE(h2_nand_partitions),
+};
+
+static struct resource h2_nand_resource = {
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device h2_nand_device = {
+ .name = "omapnand",
+ .id = 0,
+ .dev = {
+ .platform_data = &h2_nand_data,
+ },
+ .num_resources = 1,
+ .resource = &h2_nand_resource,
+};
+#endif
+
static struct resource h2_smc91x_resources[] = {
[0] = {
.start = OMAP1610_ETHR_START, /* Physical */
@@ -219,11 +279,15 @@ static struct resource h2_irda_resources[] = {
.flags = IORESOURCE_IRQ,
},
};
+
+static u64 irda_dmamask = 0xffffffff;
+
static struct platform_device h2_irda_device = {
.name = "omapirda",
.id = 0,
.dev = {
.platform_data = &h2_irda_data,
+ .dma_mask = &irda_dmamask,
},
.num_resources = ARRAY_SIZE(h2_irda_resources),
.resource = h2_irda_resources,
@@ -271,6 +335,7 @@ static struct platform_device h2_mcbsp1_device = {
static struct platform_device *h2_devices[] __initdata = {
&h2_nor_device,
+ //&h2_nand_device,
&h2_smc91x_device,
&h2_irda_device,
&h2_kp_device,
@@ -348,6 +413,13 @@ static struct omap_board_config_kernel h2_config[] __initdata = {
{ OMAP_TAG_LCD, &h2_lcd_config },
};
+#define H2_NAND_RB_GPIO_PIN 62
+
+static int h2_nand_dev_ready(struct nand_platform_data *data)
+{
+ return omap_get_gpio_datain(H2_NAND_RB_GPIO_PIN);
+}
+
static void __init h2_init(void)
{
/* Here we assume the NOR boot config: NOR on CS3 (possibly swapped
@@ -362,6 +434,13 @@ static void __init h2_init(void)
h2_nor_resource.end = h2_nor_resource.start = omap_cs3_phys();
h2_nor_resource.end += SZ_32M - 1;
+#if 0 /* REVISIT: Enable when nand_platform_data is applied */
+ h2_nand_resource.end = h2_nand_resource.start = OMAP_CS2B_PHYS;
+ h2_nand_resource.end += SZ_4K - 1;
+ if (!(omap_request_gpio(H2_NAND_RB_GPIO_PIN)))
+ h2_nand_data.dev_ready = h2_nand_dev_ready;
+#endif
+
omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index add2f703204f..4f84ae273a1f 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -47,6 +47,8 @@
#include <asm/arch/keypad.h>
#include <asm/arch/dma.h>
#include <asm/arch/common.h>
+#include <asm/arch/mcbsp.h>
+#include <asm/arch/omap-alsa.h>
extern int omap_gpio_init(void);
@@ -354,11 +356,14 @@ static struct resource h3_irda_resources[] = {
},
};
+static u64 irda_dmamask = 0xffffffff;
+
static struct platform_device h3_irda_device = {
.name = "omapirda",
.id = 0,
.dev = {
.platform_data = &h3_irda_data,
+ .dma_mask = &irda_dmamask,
},
.num_resources = ARRAY_SIZE(h3_irda_resources),
.resource = h3_irda_resources,
@@ -369,6 +374,41 @@ static struct platform_device h3_lcd_device = {
.id = -1,
};
+static struct omap_mcbsp_reg_cfg mcbsp_regs = {
+ .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
+ .spcr1 = RINTM(3) | RRST,
+ .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
+ RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(1),
+ .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
+ .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
+ XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(1) | XFIG,
+ .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
+ .srgr1 = FWID(15),
+ .srgr2 = GSYNC | CLKSP | FSGM | FPER(31),
+
+ .pcr0 = CLKRM | SCLKME | FSXP | FSRP | CLKXP | CLKRP,
+ //.pcr0 = CLKXP | CLKRP, /* mcbsp: slave */
+};
+
+static struct omap_alsa_codec_config alsa_config = {
+ .name = "H3 TSC2101",
+ .mcbsp_regs_alsa = &mcbsp_regs,
+ .codec_configure_dev = NULL, // tsc2101_configure,
+ .codec_set_samplerate = NULL, // tsc2101_set_samplerate,
+ .codec_clock_setup = NULL, // tsc2101_clock_setup,
+ .codec_clock_on = NULL, // tsc2101_clock_on,
+ .codec_clock_off = NULL, // tsc2101_clock_off,
+ .get_default_samplerate = NULL, // tsc2101_get_default_samplerate,
+};
+
+static struct platform_device h3_mcbsp1_device = {
+ .name = "omap_alsa_mcbsp",
+ .id = 1,
+ .dev = {
+ .platform_data = &alsa_config,
+ },
+};
+
static struct platform_device *devices[] __initdata = {
&nor_device,
&nand_device,
@@ -377,6 +417,7 @@ static struct platform_device *devices[] __initdata = {
&h3_irda_device,
&h3_kp_device,
&h3_lcd_device,
+ &h3_mcbsp1_device,
};
static struct omap_usb_config h3_usb_config __initdata = {
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 70014f751bc4..22db19a53647 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -33,6 +33,12 @@
#include <asm/arch/dsp_common.h>
#include <asm/arch/aic23.h>
#include <asm/arch/gpio.h>
+#include <asm/arch/omapfb.h>
+#include <asm/arch/lcd_mipid.h>
+
+#include "../plat-omap/dsp/dsp_common.h"
+
+#define ADS7846_PENDOWN_GPIO 15
static void __init omap_nokia770_init_irq(void)
{
@@ -91,9 +97,44 @@ static struct platform_device nokia770_kp_device = {
};
static struct platform_device *nokia770_devices[] __initdata = {
- &nokia770_kp_device,
+ &nokia770_kp_device,
+};
+
+static void mipid_shutdown(struct mipid_platform_data *pdata)
+{
+ if (pdata->nreset_gpio != -1) {
+ printk(KERN_INFO "shutdown LCD\n");
+ omap_set_gpio_dataout(pdata->nreset_gpio, 0);
+ msleep(120);
+ }
+}
+
+static struct mipid_platform_data nokia770_mipid_platform_data = {
+ .shutdown = mipid_shutdown,
};
+static void mipid_dev_init(void)
+{
+ const struct omap_lcd_config *conf;
+
+ conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config);
+ if (conf != NULL) {
+ nokia770_mipid_platform_data.nreset_gpio = conf->nreset_gpio;
+ nokia770_mipid_platform_data.data_lines = conf->data_lines;
+ }
+}
+
+static void ads7846_dev_init(void)
+{
+ if (omap_request_gpio(ADS7846_PENDOWN_GPIO) < 0)
+ printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
+}
+
+static int ads7846_get_pendown_state(void)
+{
+ return !omap_get_gpio_datain(ADS7846_PENDOWN_GPIO);
+}
+
static struct ads7846_platform_data nokia770_ads7846_platform_data __initdata = {
.x_max = 0x0fff,
.y_max = 0x0fff,
@@ -101,14 +142,17 @@ static struct ads7846_platform_data nokia770_ads7846_platform_data __initdata =
.pressure_max = 255,
.debounce_max = 10,
.debounce_tol = 3,
+ .debounce_rep = 1,
+ .get_pendown_state = ads7846_get_pendown_state,
};
static struct spi_board_info nokia770_spi_board_info[] __initdata = {
[0] = {
- .modalias = "lcd_mipid",
+ .modalias = "lcd_mipid",
.bus_num = 2,
.chip_select = 3,
.max_speed_hz = 12000000,
+ .platform_data = &nokia770_mipid_platform_data,
},
[1] = {
.modalias = "ads7846",
@@ -153,6 +197,7 @@ static struct omap_board_config_kernel nokia770_config[] = {
{ OMAP_TAG_MMC, &nokia770_mmc_config },
};
+#if defined(CONFIG_OMAP_DSP)
/*
* audio power control
*/
@@ -183,7 +228,7 @@ static void nokia770_audio_pwr_up(void)
clk_enable(dspxor_ck);
/* Turn on codec */
- tlv320aic23_power_up();
+ aic23_power_up();
if (omap_get_gpio_datain(HEADPHONE_GPIO))
/* HP not connected, turn on amplifier */
@@ -197,7 +242,7 @@ static void codec_delayed_power_down(struct work_struct *work)
{
down(&audio_pwr_sem);
if (audio_pwr_state == -1)
- tlv320aic23_power_down();
+ aic23_power_down();
clk_disable(dspxor_ck);
up(&audio_pwr_sem);
}
@@ -213,7 +258,8 @@ static void nokia770_audio_pwr_down(void)
schedule_delayed_work(&codec_power_down_work, HZ / 20); /* 50ms */
}
-void nokia770_audio_pwr_up_request(int stage)
+static int
+nokia770_audio_pwr_up_request(struct dsp_kfunc_device *kdev, int stage)
{
down(&audio_pwr_sem);
if (audio_pwr_state == -1)
@@ -221,9 +267,11 @@ void nokia770_audio_pwr_up_request(int stage)
/* force audio_pwr_state = 0, even if it was 1. */
audio_pwr_state = 0;
up(&audio_pwr_sem);
+ return 0;
}
-void nokia770_audio_pwr_down_request(int stage)
+static int
+nokia770_audio_pwr_down_request(struct dsp_kfunc_device *kdev, int stage)
{
down(&audio_pwr_sem);
switch (stage) {
@@ -239,8 +287,39 @@ void nokia770_audio_pwr_down_request(int stage)
break;
}
up(&audio_pwr_sem);
+ return 0;
}
+static struct dsp_kfunc_device nokia770_audio_device = {
+ .name = "audio",
+ .type = DSP_KFUNC_DEV_TYPE_AUDIO,
+ .enable = nokia770_audio_pwr_up_request,
+ .disable = nokia770_audio_pwr_down_request,
+};
+
+static __init int omap_dsp_init(void)
+{
+ int ret;
+
+ dspxor_ck = clk_get(0, "dspxor_ck");
+ if (IS_ERR(dspxor_ck)) {
+ printk(KERN_ERR "couldn't acquire dspxor_ck\n");
+ return PTR_ERR(dspxor_ck);
+ }
+
+ ret = dsp_kfunc_device_register(&nokia770_audio_device);
+ if (ret) {
+ printk(KERN_ERR
+ "KFUNC device registration faild: %s\n",
+ nokia770_audio_device.name);
+ goto out;
+ }
+ return 0;
+ out:
+ return ret;
+}
+#endif /* CONFIG_OMAP_DSP */
+
static void __init omap_nokia770_init(void)
{
nokia770_config[0].data = &nokia770_usb_config;
@@ -250,10 +329,11 @@ static void __init omap_nokia770_init(void)
ARRAY_SIZE(nokia770_spi_board_info));
omap_board_config = nokia770_config;
omap_board_config_size = ARRAY_SIZE(nokia770_config);
+ omap_gpio_init();
omap_serial_init();
- omap_dsp_audio_pwr_up_request = nokia770_audio_pwr_up_request;
- omap_dsp_audio_pwr_down_request = nokia770_audio_pwr_down_request;
- dspxor_ck = clk_get(0, "dspxor_ck");
+ omap_dsp_init();
+ ads7846_dev_init();
+ mipid_dev_init();
}
static void __init omap_nokia770_map_io(void)
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index a61bf455ee02..5db182da322b 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -29,6 +29,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
@@ -308,6 +309,18 @@ static struct platform_device osk5912_kp_device = {
.resource = osk5912_kp_resources,
};
+static struct omap_backlight_config mistral_bl_data = {
+ .default_intensity = 0xa0,
+};
+
+static struct platform_device mistral_bl_device = {
+ .name = "omap-bl",
+ .id = -1,
+ .dev = {
+ .platform_data = &mistral_bl_data,
+ },
+};
+
static struct platform_device osk5912_lcd_device = {
.name = "lcd_osk",
.id = -1,
@@ -315,6 +328,7 @@ static struct platform_device osk5912_lcd_device = {
static struct platform_device *mistral_devices[] __initdata = {
&osk5912_kp_device,
+ &mistral_bl_device,
&osk5912_lcd_device,
};
@@ -358,6 +372,38 @@ static void __init osk_mistral_init(void)
* can't talk to the ads or even the i2c eeprom.
*/
+ /* parallel camera interface */
+ omap_cfg_reg(J15_1610_CAM_LCLK);
+ omap_cfg_reg(J18_1610_CAM_D7);
+ omap_cfg_reg(J19_1610_CAM_D6);
+ omap_cfg_reg(J14_1610_CAM_D5);
+ omap_cfg_reg(K18_1610_CAM_D4);
+ omap_cfg_reg(K19_1610_CAM_D3);
+ omap_cfg_reg(K15_1610_CAM_D2);
+ omap_cfg_reg(K14_1610_CAM_D1);
+ omap_cfg_reg(L19_1610_CAM_D0);
+ omap_cfg_reg(L18_1610_CAM_VS);
+ omap_cfg_reg(L15_1610_CAM_HS);
+ omap_cfg_reg(M19_1610_CAM_RSTZ);
+ omap_cfg_reg(Y15_1610_CAM_OUTCLK);
+
+ /* serial camera interface */
+ omap_cfg_reg(H19_1610_CAM_EXCLK);
+ omap_cfg_reg(W13_1610_CCP_CLKM);
+ omap_cfg_reg(Y12_1610_CCP_CLKP);
+ /* CCP_DATAM CONFLICTS WITH UART1.TX (and serial console) */
+ // omap_cfg_reg(Y14_1610_CCP_DATAM);
+ omap_cfg_reg(W14_1610_CCP_DATAP);
+
+ /* CAM_PWDN */
+ if (omap_request_gpio(11) == 0) {
+ omap_cfg_reg(N20_1610_GPIO11);
+ omap_set_gpio_direction(11, 0 /* out */);
+ omap_set_gpio_dataout(11, 0 /* off */);
+ } else
+ pr_debug("OSK+Mistral: CAM_PWDN is awol\n");
+
+
// omap_cfg_reg(P19_1610_GPIO6); // BUSY
omap_cfg_reg(P20_1610_GPIO4); // PENIRQ
set_irq_type(OMAP_GPIO_IRQ(4), IRQT_FALLING);
@@ -388,6 +434,15 @@ static void __init osk_mistral_init(void)
} else
printk(KERN_ERR "OSK+Mistral: wakeup button is awol\n");
+ /* LCD: backlight, and power; power controls other devices on the
+ * board, like the touchscreen, EEPROM, and wakeup (!) switch.
+ */
+ omap_cfg_reg(PWL);
+ if (omap_request_gpio(2) == 0) {
+ omap_set_gpio_direction(2, 0 /* out */);
+ omap_set_gpio_dataout(2, 1 /* on */);
+ }
+
platform_add_devices(mistral_devices, ARRAY_SIZE(mistral_devices));
}
#else
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 015824185629..2f9d00a00135 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -17,49 +17,189 @@
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/input.h>
#include <linux/platform_device.h>
-#include <linux/notifier.h>
-#include <linux/clk.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/tsc2102.h>
+#include <linux/interrupt.h>
+#include <asm/apm.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mux.h>
#include <asm/arch/usb.h>
+#include <asm/arch/tc.h>
+#include <asm/arch/dma.h>
#include <asm/arch/board.h>
+#include <asm/arch/irda.h>
+#include <asm/arch/keypad.h>
#include <asm/arch/common.h>
+#include <asm/arch/mcbsp.h>
+#include <asm/arch/omap-alsa.h>
-static void __init omap_generic_init_irq(void)
+static void __init omap_palmte_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
+ omap_gpio_init();
}
+static int palmte_keymap[] = {
+ KEY(0, 0, KEY_F1),
+ KEY(0, 1, KEY_F2),
+ KEY(0, 2, KEY_F3),
+ KEY(0, 3, KEY_F4),
+ KEY(0, 4, KEY_POWER),
+ KEY(1, 0, KEY_LEFT),
+ KEY(1, 1, KEY_DOWN),
+ KEY(1, 2, KEY_UP),
+ KEY(1, 3, KEY_RIGHT),
+ KEY(1, 4, KEY_CENTER),
+ 0,
+};
+
+static struct omap_kp_platform_data palmte_kp_data = {
+ .rows = 8,
+ .cols = 8,
+ .keymap = palmte_keymap,
+ .rep = 1,
+ .delay = 12,
+};
+
+static struct resource palmte_kp_resources[] = {
+ [0] = {
+ .start = INT_KEYBOARD,
+ .end = INT_KEYBOARD,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device palmte_kp_device = {
+ .name = "omap-keypad",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmte_kp_data,
+ },
+ .num_resources = ARRAY_SIZE(palmte_kp_resources),
+ .resource = palmte_kp_resources,
+};
+
+static struct mtd_partition palmte_rom_partitions[] = {
+ /* PalmOS "Small ROM", contains the bootloader and the debugger */
+ {
+ .name = "smallrom",
+ .offset = 0,
+ .size = 0xa000,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ /* PalmOS "Big ROM", a filesystem with all the OS code and data */
+ {
+ .name = "bigrom",
+ .offset = SZ_128K,
+ /*
+ * 0x5f0000 bytes big in the multi-language ("EFIGS") version,
+ * 0x7b0000 bytes in the English-only ("enUS") version.
+ */
+ .size = 0x7b0000,
+ .mask_flags = MTD_WRITEABLE,
+ },
+};
+
+static struct flash_platform_data palmte_rom_data = {
+ .map_name = "map_rom",
+ .width = 2,
+ .parts = palmte_rom_partitions,
+ .nr_parts = ARRAY_SIZE(palmte_rom_partitions),
+};
+
+static struct resource palmte_rom_resource = {
+ .start = OMAP_CS0_PHYS,
+ .end = OMAP_CS0_PHYS + SZ_8M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device palmte_rom_device = {
+ .name = "omapflash",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmte_rom_data,
+ },
+ .num_resources = 1,
+ .resource = &palmte_rom_resource,
+};
+
static struct platform_device palmte_lcd_device = {
.name = "lcd_palmte",
.id = -1,
};
+static struct omap_backlight_config palmte_backlight_config = {
+ .default_intensity = 0xa0,
+};
+
+static struct platform_device palmte_backlight_device = {
+ .name = "omap-bl",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmte_backlight_config,
+ },
+};
+
+static struct omap_irda_config palmte_irda_config = {
+ .transceiver_cap = IR_SIRMODE,
+ .rx_channel = OMAP_DMA_UART3_RX,
+ .tx_channel = OMAP_DMA_UART3_TX,
+ .dest_start = UART3_THR,
+ .src_start = UART3_RHR,
+ .tx_trigger = 0,
+ .rx_trigger = 0,
+};
+
+static struct resource palmte_irda_resources[] = {
+ [0] = {
+ .start = INT_UART3,
+ .end = INT_UART3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device palmte_irda_device = {
+ .name = "omapirda",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmte_irda_config,
+ },
+ .num_resources = ARRAY_SIZE(palmte_irda_resources),
+ .resource = palmte_irda_resources,
+};
+
static struct platform_device *devices[] __initdata = {
+ &palmte_rom_device,
+ &palmte_kp_device,
&palmte_lcd_device,
+ &palmte_backlight_device,
+ &palmte_irda_device,
};
static struct omap_usb_config palmte_usb_config __initdata = {
- .register_dev = 1,
+ .register_dev = 1, /* Mini-B only receptacle */
.hmc_mode = 0,
- .pins[0] = 3,
+ .pins[0] = 2,
};
static struct omap_mmc_config palmte_mmc_config __initdata = {
- .mmc [0] = {
+ .mmc[0] = {
.enabled = 1,
- .wire4 = 1,
- .wp_pin = OMAP_MPUIO(3),
- .power_pin = -1,
- .switch_pin = -1,
+ .wp_pin = PALMTE_MMC_WP_GPIO,
+ .power_pin = PALMTE_MMC_POWER_GPIO,
+ .switch_pin = PALMTE_MMC_SWITCH_GPIO,
},
};
@@ -67,21 +207,222 @@ static struct omap_lcd_config palmte_lcd_config __initdata = {
.ctrl_name = "internal",
};
+static struct omap_uart_config palmte_uart_config __initdata = {
+ .enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
+};
+
+static struct omap_mcbsp_reg_cfg palmte_mcbsp1_regs = {
+ .spcr2 = FRST | GRST | XRST | XINTM(3),
+ .xcr2 = XDATDLY(1) | XFIG,
+ .xcr1 = XWDLEN1(OMAP_MCBSP_WORD_32),
+ .pcr0 = SCLKME | FSXP | CLKXP,
+};
+
+static struct omap_alsa_codec_config palmte_alsa_config = {
+ .name = "TSC2102 audio",
+ .mcbsp_regs_alsa = &palmte_mcbsp1_regs,
+ .codec_configure_dev = NULL, /* tsc2102_configure, */
+ .codec_set_samplerate = NULL, /* tsc2102_set_samplerate, */
+ .codec_clock_setup = NULL, /* tsc2102_clock_setup, */
+ .codec_clock_on = NULL, /* tsc2102_clock_on, */
+ .codec_clock_off = NULL, /* tsc2102_clock_off, */
+ .get_default_samplerate = NULL, /* tsc2102_get_default_samplerate, */
+};
+
+#ifdef CONFIG_APM
+/*
+ * Values measured in 10 minute intervals averaged over 10 samples.
+ * May differ slightly from device to device but should be accurate
+ * enough to give basic idea of battery life left and trigger
+ * potential alerts.
+ */
+static const int palmte_battery_sample[] = {
+ 2194, 2157, 2138, 2120,
+ 2104, 2089, 2075, 2061,
+ 2048, 2038, 2026, 2016,
+ 2008, 1998, 1989, 1980,
+ 1970, 1958, 1945, 1928,
+ 1910, 1888, 1860, 1827,
+ 1791, 1751, 1709, 1656,
+};
+
+#define INTERVAL 10
+#define BATTERY_HIGH_TRESHOLD 66
+#define BATTERY_LOW_TRESHOLD 33
+
+static void palmte_get_power_status(struct apm_power_info *info, int *battery)
+{
+ int charging, batt, hi, lo, mid;
+
+ charging = !omap_get_gpio_datain(PALMTE_DC_GPIO);
+ batt = battery[0];
+ if (charging)
+ batt -= 60;
+
+ hi = ARRAY_SIZE(palmte_battery_sample);
+ lo = 0;
+
+ info->battery_flag = 0;
+ info->units = APM_UNITS_MINS;
+
+ if (batt > palmte_battery_sample[lo]) {
+ info->battery_life = 100;
+ info->time = INTERVAL * ARRAY_SIZE(palmte_battery_sample);
+ } else if (batt <= palmte_battery_sample[hi - 1]) {
+ info->battery_life = 0;
+ info->time = 0;
+ } else {
+ while (hi > lo + 1) {
+ mid = (hi + lo) >> 2;
+ if (batt <= palmte_battery_sample[mid])
+ lo = mid;
+ else
+ hi = mid;
+ }
+
+ mid = palmte_battery_sample[lo] - palmte_battery_sample[hi];
+ hi = palmte_battery_sample[lo] - batt;
+ info->battery_life = 100 - (100 * lo + 100 * hi / mid) /
+ ARRAY_SIZE(palmte_battery_sample);
+ info->time = INTERVAL * (ARRAY_SIZE(palmte_battery_sample) -
+ lo) - INTERVAL * hi / mid;
+ }
+
+ if (charging) {
+ info->ac_line_status = APM_AC_ONLINE;
+ info->battery_status = APM_BATTERY_STATUS_CHARGING;
+ info->battery_flag |= APM_BATTERY_FLAG_CHARGING;
+ } else {
+ info->ac_line_status = APM_AC_OFFLINE;
+ if (info->battery_life > BATTERY_HIGH_TRESHOLD)
+ info->battery_status = APM_BATTERY_STATUS_HIGH;
+ else if (info->battery_life > BATTERY_LOW_TRESHOLD)
+ info->battery_status = APM_BATTERY_STATUS_LOW;
+ else
+ info->battery_status = APM_BATTERY_STATUS_CRITICAL;
+ }
+
+ if (info->battery_life > BATTERY_HIGH_TRESHOLD)
+ info->battery_flag |= APM_BATTERY_FLAG_HIGH;
+ else if (info->battery_life > BATTERY_LOW_TRESHOLD)
+ info->battery_flag |= APM_BATTERY_FLAG_LOW;
+ else
+ info->battery_flag |= APM_BATTERY_FLAG_CRITICAL;
+}
+#else
+#define palmte_get_power_status NULL
+#endif
+
+static struct tsc2102_config palmte_tsc2102_config = {
+ .use_internal = 0,
+ .monitor = TSC_BAT1 | TSC_AUX | TSC_TEMP,
+ .temp_at25c = { 2200, 2615 },
+ .apm_report = palmte_get_power_status,
+ .alsa_config = &palmte_alsa_config,
+};
+
static struct omap_board_config_kernel palmte_config[] = {
- { OMAP_TAG_USB, &palmte_usb_config },
- { OMAP_TAG_MMC, &palmte_mmc_config },
- { OMAP_TAG_LCD, &palmte_lcd_config },
+ { OMAP_TAG_USB, &palmte_usb_config },
+ { OMAP_TAG_MMC, &palmte_mmc_config },
+ { OMAP_TAG_LCD, &palmte_lcd_config },
+ { OMAP_TAG_UART, &palmte_uart_config },
};
-static void __init omap_generic_init(void)
+static struct spi_board_info palmte_spi_info[] __initdata = {
+ {
+ .modalias = "tsc2102",
+ .bus_num = 2, /* uWire (officially) */
+ .chip_select = 0, /* As opposed to 3 */
+ .irq = OMAP_GPIO_IRQ(PALMTE_PINTDAV_GPIO),
+ .platform_data = &palmte_tsc2102_config,
+ .max_speed_hz = 8000000,
+ },
+};
+
+/* Periodically check for changes on important input pins */
+struct timer_list palmte_pin_timer;
+int prev_power, prev_headphones;
+
+static void palmte_pin_handler(unsigned long data) {
+ int power, headphones;
+
+ power = !omap_get_gpio_datain(PALMTE_DC_GPIO);
+ headphones = omap_get_gpio_datain(PALMTE_HEADPHONES_GPIO);
+
+ if (power && !prev_power)
+ printk(KERN_INFO "PM: cable connected\n");
+ else if (!power && prev_power)
+ printk(KERN_INFO "PM: cable disconnected\n");
+
+ if (headphones && !prev_headphones) {
+ /* Headphones connected, disable speaker */
+ omap_set_gpio_dataout(PALMTE_SPEAKER_GPIO, 0);
+ printk(KERN_INFO "PM: speaker off\n");
+ } else if (!headphones && prev_headphones) {
+ /* Headphones unplugged, re-enable speaker */
+ omap_set_gpio_dataout(PALMTE_SPEAKER_GPIO, 1);
+ printk(KERN_INFO "PM: speaker on\n");
+ }
+
+ prev_power = power;
+ prev_headphones = headphones;
+ mod_timer(&palmte_pin_timer, jiffies + msecs_to_jiffies(500));
+}
+
+static void __init palmte_gpio_setup(void)
+{
+ /* Set TSC2102 PINTDAV pin as input */
+ if (omap_request_gpio(PALMTE_PINTDAV_GPIO)) {
+ printk(KERN_ERR "Could not reserve PINTDAV GPIO!\n");
+ return;
+ }
+ omap_set_gpio_direction(PALMTE_PINTDAV_GPIO, 1);
+
+ /* Monitor cable-connected signals */
+ if (omap_request_gpio(PALMTE_DC_GPIO) ||
+ omap_request_gpio(PALMTE_USB_OR_DC_GPIO) ||
+ omap_request_gpio(PALMTE_USBDETECT_GPIO)) {
+ printk(KERN_ERR "Could not reserve cable signal GPIO!\n");
+ return;
+ }
+ omap_set_gpio_direction(PALMTE_DC_GPIO, 1);
+ omap_set_gpio_direction(PALMTE_USB_OR_DC_GPIO, 1);
+ omap_set_gpio_direction(PALMTE_USBDETECT_GPIO, 1);
+
+ /* Set speaker-enable pin as output */
+ if (omap_request_gpio(PALMTE_SPEAKER_GPIO)) {
+ printk(KERN_ERR "Could not reserve speaker GPIO!\n");
+ return;
+ }
+ omap_set_gpio_direction(PALMTE_SPEAKER_GPIO, 0);
+
+ /* Monitor the headphones-connected signal */
+ if (omap_request_gpio(PALMTE_HEADPHONES_GPIO)) {
+ printk(KERN_ERR "Could not reserve headphones signal GPIO!\n");
+ return;
+ }
+ omap_set_gpio_direction(PALMTE_HEADPHONES_GPIO, 1);
+
+ prev_power = omap_get_gpio_datain(PALMTE_DC_GPIO);
+ prev_headphones = !omap_get_gpio_datain(PALMTE_HEADPHONES_GPIO);
+ setup_timer(&palmte_pin_timer, palmte_pin_handler, 0);
+ palmte_pin_handler(0);
+}
+
+static void __init omap_palmte_init(void)
{
omap_board_config = palmte_config;
omap_board_config_size = ARRAY_SIZE(palmte_config);
platform_add_devices(devices, ARRAY_SIZE(devices));
+
+ spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info));
+
+ omap_serial_init();
+ palmte_gpio_setup();
}
-static void __init omap_generic_map_io(void)
+static void __init omap_palmte_map_io(void)
{
omap1_map_common_io();
}
@@ -90,8 +431,8 @@ MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
.phys_io = 0xfff00000,
.io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
.boot_params = 0x10000100,
- .map_io = omap_generic_map_io,
- .init_irq = omap_generic_init_irq,
- .init_machine = omap_generic_init,
+ .map_io = omap_palmte_map_io,
+ .init_irq = omap_palmte_init_irq,
+ .init_machine = omap_palmte_init,
.timer = &omap_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
new file mode 100644
index 000000000000..e47010fec275
--- /dev/null
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -0,0 +1,357 @@
+/*
+ * linux/arch/arm/mach-omap1/board-palmtt.c
+ *
+ * Modified from board-palmtt2.c
+ *
+ * Modified and amended for Palm Tungsten|T
+ * by Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/notifier.h>
+#include <linux/clk.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/leds.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <asm/arch/led.h>
+#include <asm/arch/mcbsp.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/usb.h>
+#include <asm/arch/dma.h>
+#include <asm/arch/tc.h>
+#include <asm/arch/board.h>
+#include <asm/arch/irda.h>
+#include <asm/arch/keypad.h>
+#include <asm/arch/common.h>
+#include <asm/arch/omap-alsa.h>
+
+#include <linux/input.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+static int palmtt_keymap[] = {
+ KEY(0, 0, KEY_ESC),
+ KEY(0, 1, KEY_SPACE),
+ KEY(0, 2, KEY_LEFTCTRL),
+ KEY(0, 3, KEY_TAB),
+ KEY(0, 4, KEY_ENTER),
+ KEY(1, 0, KEY_LEFT),
+ KEY(1, 1, KEY_DOWN),
+ KEY(1, 2, KEY_UP),
+ KEY(1, 3, KEY_RIGHT),
+ KEY(2, 0, KEY_SLEEP),
+ KEY(2, 4, KEY_Y),
+ 0
+};
+
+static struct mtd_partition palmtt_partitions[] = {
+ {
+ .name = "write8k",
+ .offset = 0,
+ .size = SZ_8K,
+ .mask_flags = 0,
+ },
+ {
+ .name = "PalmOS-BootLoader(ro)",
+ .offset = SZ_8K,
+ .size = 7 * SZ_8K,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ {
+ .name = "u-boot",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 8 * SZ_8K,
+ .mask_flags = 0,
+ },
+ {
+ .name = "PalmOS-FS(ro)",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 7 * SZ_1M + 4 * SZ_64K - 16 * SZ_8K,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ {
+ .name = "u-boot(rez)",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_128K,
+ .mask_flags = 0
+ },
+ {
+ .name = "empty",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0
+ }
+};
+
+static struct flash_platform_data palmtt_flash_data = {
+ .map_name = "cfi_probe",
+ .width = 2,
+ .parts = palmtt_partitions,
+ .nr_parts = ARRAY_SIZE(palmtt_partitions),
+};
+
+static struct resource palmtt_flash_resource = {
+ .start = OMAP_CS0_PHYS,
+ .end = OMAP_CS0_PHYS + SZ_8M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device palmtt_flash_device = {
+ .name = "omapflash",
+ .id = 0,
+ .dev = {
+ .platform_data = &palmtt_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &palmtt_flash_resource,
+};
+
+#define DEFAULT_BITPERSAMPLE 16
+
+static struct omap_mcbsp_reg_cfg mcbsp_regs = {
+ .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
+ .spcr1 = RINTM(3) | RRST,
+ .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
+ RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
+ .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) |
+ RWDLEN1(OMAP_MCBSP_WORD_16),
+ .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
+ XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
+ .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) |
+ XWDLEN1(OMAP_MCBSP_WORD_16),
+ .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
+ .srgr2 = GSYNC | CLKSP | FSGM |
+ FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
+ .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */
+};
+
+static struct omap_alsa_codec_config alsa_config = {
+ .name = "PalmTT AIC23",
+ .mcbsp_regs_alsa = &mcbsp_regs,
+ .codec_configure_dev = NULL, // aic23_configure,
+ .codec_set_samplerate = NULL, // aic23_set_samplerate,
+ .codec_clock_setup = NULL, // aic23_clock_setup,
+ .codec_clock_on = NULL, // aic23_clock_on,
+ .codec_clock_off = NULL, // aic23_clock_off,
+ .get_default_samplerate = NULL, // aic23_get_default_samplerate,
+};
+
+static struct platform_device palmtt_mcbsp1_device = {
+ .name = "omap_alsa_mcbsp",
+ .id = 1,
+ .dev = {
+ .platform_data = &alsa_config,
+ },
+};
+
+static struct resource palmtt_kp_resources[] = {
+ [0] = {
+ .start = INT_KEYBOARD,
+ .end = INT_KEYBOARD,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct omap_kp_platform_data palmtt_kp_data = {
+ .rows = 6,
+ .cols = 3,
+ .keymap = palmtt_keymap,
+};
+
+static struct platform_device palmtt_kp_device = {
+ .name = "omap-keypad",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmtt_kp_data,
+ },
+ .num_resources = ARRAY_SIZE(palmtt_kp_resources),
+ .resource = palmtt_kp_resources,
+};
+
+static struct platform_device palmtt_lcd_device = {
+ .name = "lcd_palmtt",
+ .id = -1,
+};
+static struct omap_irda_config palmtt_irda_config = {
+ .transceiver_cap = IR_SIRMODE,
+ .rx_channel = OMAP_DMA_UART3_RX,
+ .tx_channel = OMAP_DMA_UART3_TX,
+ .dest_start = UART3_THR,
+ .src_start = UART3_RHR,
+ .tx_trigger = 0,
+ .rx_trigger = 0,
+};
+
+static struct resource palmtt_irda_resources[] = {
+ [0] = {
+ .start = INT_UART3,
+ .end = INT_UART3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device palmtt_irda_device = {
+ .name = "omapirda",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmtt_irda_config,
+ },
+ .num_resources = ARRAY_SIZE(palmtt_irda_resources),
+ .resource = palmtt_irda_resources,
+};
+
+static struct platform_device palmtt_spi_device = {
+ .name = "spi_palmtt",
+ .id = -1,
+};
+
+static struct omap_backlight_config palmtt_backlight_config = {
+ .default_intensity = 0xa0,
+};
+
+static struct platform_device palmtt_backlight_device = {
+ .name = "omap-bl",
+ .id = -1,
+ .dev = {
+ .platform_data= &palmtt_backlight_config,
+ },
+};
+
+static struct omap_led_config palmtt_led_config[] = {
+ {
+ .cdev = {
+ .name = "palmtt:led0",
+ },
+ .gpio = PALMTT_LED_GPIO,
+ },
+};
+
+static struct omap_led_platform_data palmtt_led_data = {
+ .nr_leds = ARRAY_SIZE(palmtt_led_config),
+ .leds = palmtt_led_config,
+};
+
+static struct platform_device palmtt_led_device = {
+ .name = "omap-led",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmtt_led_data,
+ },
+};
+
+static struct platform_device *palmtt_devices[] __initdata = {
+ &palmtt_flash_device,
+ &palmtt_mcbsp1_device,
+ &palmtt_kp_device,
+ &palmtt_lcd_device,
+ &palmtt_irda_device,
+ &palmtt_spi_device,
+ &palmtt_backlight_device,
+ &palmtt_led_device,
+};
+
+static int palmtt_get_pendown_state(void)
+{
+ return !omap_get_gpio_datain(6);
+}
+
+static const struct ads7846_platform_data palmtt_ts_info = {
+ .model = 7846,
+ .vref_delay_usecs = 100, /* internal, no capacitor */
+ .x_plate_ohms = 419,
+ .y_plate_ohms = 486,
+ .get_pendown_state = palmtt_get_pendown_state,
+};
+
+static struct spi_board_info __initdata palmtt_boardinfo[] = {
+ {
+ /* MicroWire (bus 2) CS0 has an ads7846e */
+ .modalias = "ads7846",
+ .platform_data = &palmtt_ts_info,
+ .irq = OMAP_GPIO_IRQ(6),
+ .max_speed_hz = 120000 /* max sample rate at 3V */
+ * 26 /* command + data + overhead */,
+ .bus_num = 2,
+ .chip_select = 0,
+ }
+};
+
+static void __init omap_palmtt_init_irq(void)
+{
+ omap1_init_common_hw();
+ omap_init_irq();
+}
+
+static struct omap_usb_config palmtt_usb_config __initdata = {
+ .register_dev = 1,
+ .hmc_mode = 0,
+ .pins[0] = 2,
+};
+
+static struct omap_lcd_config palmtt_lcd_config __initdata = {
+ .ctrl_name = "internal",
+};
+
+static struct omap_uart_config palmtt_uart_config __initdata = {
+ .enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
+};
+
+static struct omap_board_config_kernel palmtt_config[] = {
+ { OMAP_TAG_USB, &palmtt_usb_config },
+ { OMAP_TAG_LCD, &palmtt_lcd_config },
+ { OMAP_TAG_UART, &palmtt_uart_config },
+};
+
+static void __init omap_mpu_wdt_mode(int mode) {
+ if (mode)
+ omap_writew(0x8000, OMAP_WDT_TIMER_MODE);
+ else {
+ omap_writew(0x00f5, OMAP_WDT_TIMER_MODE);
+ omap_writew(0x00a0, OMAP_WDT_TIMER_MODE);
+ }
+}
+
+static void __init omap_palmtt_init(void)
+{
+ omap_mpu_wdt_mode(0);
+
+ omap_board_config = palmtt_config;
+ omap_board_config_size = ARRAY_SIZE(palmtt_config);
+
+ platform_add_devices(palmtt_devices, ARRAY_SIZE(palmtt_devices));
+
+ spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo));
+ omap_serial_init();
+}
+
+static void __init omap_palmtt_map_io(void)
+{
+ omap1_map_common_io();
+}
+
+MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
+ .phys_io = 0xfff00000,
+ .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
+ .boot_params = 0x10000100,
+ .map_io = omap_palmtt_map_io,
+ .init_irq = omap_palmtt_init_irq,
+ .init_machine = omap_palmtt_init,
+ .timer = &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
new file mode 100644
index 000000000000..c275d517764a
--- /dev/null
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -0,0 +1,383 @@
+/*
+ * linux/arch/arm/mach-omap1/board-palmz71.c
+ *
+ * Modified from board-generic.c
+ *
+ * Support for the Palm Zire71 PDA.
+ *
+ * Original version : Laurent Gonzalez
+ *
+ * Modified for zire71 : Marek Vasut
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/notifier.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <asm/arch/mcbsp.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/usb.h>
+#include <asm/arch/dma.h>
+#include <asm/arch/tc.h>
+#include <asm/arch/board.h>
+#include <asm/arch/irda.h>
+#include <asm/arch/keypad.h>
+#include <asm/arch/common.h>
+#include <asm/arch/omap-alsa.h>
+
+#include <linux/input.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+static void __init
+omap_palmz71_init_irq(void)
+{
+ omap1_init_common_hw();
+ omap_init_irq();
+ omap_gpio_init();
+}
+
+static int palmz71_keymap[] = {
+ KEY(0, 0, KEY_F1),
+ KEY(0, 1, KEY_F2),
+ KEY(0, 2, KEY_F3),
+ KEY(0, 3, KEY_F4),
+ KEY(0, 4, KEY_POWER),
+ KEY(1, 0, KEY_LEFT),
+ KEY(1, 1, KEY_DOWN),
+ KEY(1, 2, KEY_UP),
+ KEY(1, 3, KEY_RIGHT),
+ KEY(1, 4, KEY_CENTER),
+ KEY(2, 0, KEY_CAMERA),
+ 0,
+};
+
+static struct omap_kp_platform_data palmz71_kp_data = {
+ .rows = 8,
+ .cols = 8,
+ .keymap = palmz71_keymap,
+ .rep = 1,
+ .delay = 80,
+};
+
+static struct resource palmz71_kp_resources[] = {
+ [0] = {
+ .start = INT_KEYBOARD,
+ .end = INT_KEYBOARD,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device palmz71_kp_device = {
+ .name = "omap-keypad",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmz71_kp_data,
+ },
+ .num_resources = ARRAY_SIZE(palmz71_kp_resources),
+ .resource = palmz71_kp_resources,
+};
+
+static struct mtd_partition palmz71_rom_partitions[] = {
+ /* PalmOS "Small ROM", contains the bootloader and the debugger */
+ {
+ .name = "smallrom",
+ .offset = 0,
+ .size = 0xa000,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ /* PalmOS "Big ROM", a filesystem with all the OS code and data */
+ {
+ .name = "bigrom",
+ .offset = SZ_128K,
+ /*
+ * 0x5f0000 bytes big in the multi-language ("EFIGS") version,
+ * 0x7b0000 bytes in the English-only ("enUS") version.
+ */
+ .size = 0x7b0000,
+ .mask_flags = MTD_WRITEABLE,
+ },
+};
+
+static struct flash_platform_data palmz71_rom_data = {
+ .map_name = "map_rom",
+ .name = "onboardrom",
+ .width = 2,
+ .parts = palmz71_rom_partitions,
+ .nr_parts = ARRAY_SIZE(palmz71_rom_partitions),
+};
+
+static struct resource palmz71_rom_resource = {
+ .start = OMAP_CS0_PHYS,
+ .end = OMAP_CS0_PHYS + SZ_8M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device palmz71_rom_device = {
+ .name = "omapflash",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmz71_rom_data,
+ },
+ .num_resources = 1,
+ .resource = &palmz71_rom_resource,
+};
+
+static struct platform_device palmz71_lcd_device = {
+ .name = "lcd_palmz71",
+ .id = -1,
+};
+
+static struct omap_irda_config palmz71_irda_config = {
+ .transceiver_cap = IR_SIRMODE,
+ .rx_channel = OMAP_DMA_UART3_RX,
+ .tx_channel = OMAP_DMA_UART3_TX,
+ .dest_start = UART3_THR,
+ .src_start = UART3_RHR,
+ .tx_trigger = 0,
+ .rx_trigger = 0,
+};
+
+static struct resource palmz71_irda_resources[] = {
+ [0] = {
+ .start = INT_UART3,
+ .end = INT_UART3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device palmz71_irda_device = {
+ .name = "omapirda",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmz71_irda_config,
+ },
+ .num_resources = ARRAY_SIZE(palmz71_irda_resources),
+ .resource = palmz71_irda_resources,
+};
+
+static struct platform_device palmz71_spi_device = {
+ .name = "spi_palmz71",
+ .id = -1,
+};
+
+#define DEFAULT_BITPERSAMPLE 16
+
+static struct omap_mcbsp_reg_cfg mcbsp_regs = {
+ .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
+ .spcr1 = RINTM(3) | RRST,
+ .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
+ RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
+ .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
+ .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
+ XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
+ .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
+ .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
+ .srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
+ .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */
+};
+
+static struct omap_alsa_codec_config alsa_config = {
+ .name = "PalmZ71 AIC23",
+ .mcbsp_regs_alsa = &mcbsp_regs,
+ .codec_configure_dev = NULL, /* aic23_configure */
+ .codec_set_samplerate = NULL, /* aic23_set_samplerate */
+ .codec_clock_setup = NULL, /* aic23_clock_setup */
+ .codec_clock_on = NULL, /* aic23_clock_on */
+ .codec_clock_off = NULL, /* aic23_clock_off */
+ .get_default_samplerate = NULL, /* aic23_get_default_samplerate */
+};
+
+static struct platform_device palmz71_mcbsp1_device = {
+ .name = "omap_alsa_mcbsp",
+ .id = 1,
+ .dev = {
+ .platform_data = &alsa_config,
+ },
+};
+
+static struct omap_backlight_config palmz71_backlight_config = {
+ .default_intensity = 0xa0,
+};
+
+static struct platform_device palmz71_backlight_device = {
+ .name = "omap-bl",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmz71_backlight_config,
+ },
+};
+
+static struct platform_device *devices[] __initdata = {
+ &palmz71_rom_device,
+ &palmz71_kp_device,
+ &palmz71_mcbsp1_device,
+ &palmz71_lcd_device,
+ &palmz71_irda_device,
+ &palmz71_spi_device,
+ &palmz71_backlight_device,
+};
+
+static int
+palmz71_get_pendown_state(void)
+{
+ return !omap_get_gpio_datain(PALMZ71_PENIRQ_GPIO);
+}
+
+static const struct ads7846_platform_data palmz71_ts_info = {
+ .model = 7846,
+ .vref_delay_usecs = 100, /* internal, no capacitor */
+ .x_plate_ohms = 419,
+ .y_plate_ohms = 486,
+ .get_pendown_state = palmz71_get_pendown_state,
+};
+
+static struct spi_board_info __initdata palmz71_boardinfo[] = { {
+ /* MicroWire (bus 2) CS0 has an ads7846e */
+ .modalias = "ads7846",
+ .platform_data = &palmz71_ts_info,
+ .irq = OMAP_GPIO_IRQ(PALMZ71_PENIRQ_GPIO),
+ .max_speed_hz = 120000 /* max sample rate at 3V */
+ * 26 /* command + data + overhead */,
+ .bus_num = 2,
+ .chip_select = 0,
+} };
+
+static struct omap_usb_config palmz71_usb_config __initdata = {
+ .register_dev = 1, /* Mini-B only receptacle */
+ .hmc_mode = 0,
+ .pins[0] = 2,
+};
+
+static struct omap_mmc_config palmz71_mmc_config __initdata = {
+ .mmc[0] = {
+ .enabled = 1,
+ .wire4 = 0,
+ .wp_pin = PALMZ71_MMC_WP_GPIO,
+ .power_pin = -1,
+ .switch_pin = PALMZ71_MMC_IN_GPIO,
+ },
+};
+
+static struct omap_lcd_config palmz71_lcd_config __initdata = {
+ .ctrl_name = "internal",
+};
+
+static struct omap_uart_config palmz71_uart_config __initdata = {
+ .enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
+};
+
+static struct omap_board_config_kernel palmz71_config[] = {
+ {OMAP_TAG_USB, &palmz71_usb_config},
+ {OMAP_TAG_MMC, &palmz71_mmc_config},
+ {OMAP_TAG_LCD, &palmz71_lcd_config},
+ {OMAP_TAG_UART, &palmz71_uart_config},
+};
+
+static irqreturn_t
+palmz71_powercable(int irq, void *dev_id)
+{
+ if (omap_get_gpio_datain(PALMZ71_USBDETECT_GPIO)) {
+ printk(KERN_INFO "PM: Power cable connected\n");
+ set_irq_type(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO),
+ IRQT_FALLING);
+ } else {
+ printk(KERN_INFO "PM: Power cable disconnected\n");
+ set_irq_type(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO),
+ IRQT_RISING);
+ }
+ return IRQ_HANDLED;
+}
+
+static void __init
+omap_mpu_wdt_mode(int mode)
+{
+ if (mode)
+ omap_writew(0x8000, OMAP_WDT_TIMER_MODE);
+ else {
+ omap_writew(0x00f5, OMAP_WDT_TIMER_MODE);
+ omap_writew(0x00a0, OMAP_WDT_TIMER_MODE);
+ }
+}
+
+static void __init
+palmz71_gpio_setup(int early)
+{
+ if (early) {
+ /* Only set GPIO1 so we have a working serial */
+ omap_set_gpio_dataout(1, 1);
+ omap_set_gpio_direction(1, 0);
+ } else {
+ /* Set MMC/SD host WP pin as input */
+ if (omap_request_gpio(PALMZ71_MMC_WP_GPIO)) {
+ printk(KERN_ERR "Could not reserve WP GPIO!\n");
+ return;
+ }
+ omap_set_gpio_direction(PALMZ71_MMC_WP_GPIO, 1);
+
+ /* Monitor the Power-cable-connected signal */
+ if (omap_request_gpio(PALMZ71_USBDETECT_GPIO)) {
+ printk(KERN_ERR
+ "Could not reserve cable signal GPIO!\n");
+ return;
+ }
+ omap_set_gpio_direction(PALMZ71_USBDETECT_GPIO, 1);
+ if (request_irq(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO),
+ palmz71_powercable, IRQF_SAMPLE_RANDOM,
+ "palmz71-cable", 0))
+ printk(KERN_ERR
+ "IRQ request for power cable failed!\n");
+ palmz71_powercable(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO), 0);
+ }
+}
+
+static void __init
+omap_palmz71_init(void)
+{
+ palmz71_gpio_setup(1);
+ omap_mpu_wdt_mode(0);
+
+ omap_board_config = palmz71_config;
+ omap_board_config_size = ARRAY_SIZE(palmz71_config);
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+
+ spi_register_board_info(palmz71_boardinfo,
+ ARRAY_SIZE(palmz71_boardinfo));
+ omap_serial_init();
+ palmz71_gpio_setup(0);
+}
+
+static void __init
+omap_palmz71_map_io(void)
+{
+ omap1_map_common_io();
+}
+
+MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
+ .phys_io = 0xfff00000,
+ .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
+ .boot_params = 0x10000100,.map_io = omap_palmz71_map_io,
+ .init_irq = omap_palmz71_init_irq,
+ .init_machine = omap_palmz71_init,
+ .timer = &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
new file mode 100644
index 000000000000..2743d639aa05
--- /dev/null
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -0,0 +1,494 @@
+/*
+* linux/arch/arm/mach-omap1/board-sx1.c
+*
+* Modified from board-generic.c
+*
+* Support for the Siemens SX1 mobile phone.
+*
+* Original version : Vladimir Ananiev (Vovan888-at-gmail com)
+*
+* Maintainters : Vladimir Ananiev (aka Vovan888), Sergge
+* oslik.ru
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License version 2 as
+* published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/notifier.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/types.h>
+#include <linux/i2c.h>
+#include <linux/errno.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/irda.h>
+#include <asm/arch/usb.h>
+#include <asm/arch/tc.h>
+#include <asm/arch/board.h>
+#include <asm/arch/common.h>
+#include <asm/arch/mcbsp.h>
+#include <asm/arch/omap-alsa.h>
+#include <asm/arch/keypad.h>
+
+/* Write to I2C device */
+int i2c_write_byte(u8 devaddr, u8 regoffset, u8 value)
+{
+ struct i2c_adapter *adap;
+ int err;
+ struct i2c_msg msg[1];
+ unsigned char data[2];
+
+ adap = i2c_get_adapter(0);
+ if (!adap)
+ return -ENODEV;
+ msg->addr = devaddr; /* I2C address of chip */
+ msg->flags = 0;
+ msg->len = 2;
+ msg->buf = data;
+ data[0] = regoffset; /* register num */
+ data[1] = value; /* register data */
+ err = i2c_transfer(adap, msg, 1);
+ if (err >= 0)
+ return 0;
+ return err;
+}
+
+/* Read from I2C device */
+int i2c_read_byte(u8 devaddr, u8 regoffset, u8 * value)
+{
+ struct i2c_adapter *adap;
+ int err;
+ struct i2c_msg msg[1];
+ unsigned char data[2];
+
+ adap = i2c_get_adapter(0);
+ if (!adap)
+ return -ENODEV;
+
+ msg->addr = devaddr; /* I2C address of chip */
+ msg->flags = 0;
+ msg->len = 1;
+ msg->buf = data;
+ data[0] = regoffset; /* register num */
+ err = i2c_transfer(adap, msg, 1);
+
+ msg->addr = devaddr; /* I2C address */
+ msg->flags = I2C_M_RD;
+ msg->len = 1;
+ msg->buf = data;
+ err = i2c_transfer(adap, msg, 1);
+ *value = data[0];
+
+ if (err >= 0)
+ return 0;
+ return err;
+}
+/* set keyboard backlight intensity */
+int sx1_setkeylight(u8 keylight)
+{
+ if (keylight > SOFIA_MAX_LIGHT_VAL)
+ keylight = SOFIA_MAX_LIGHT_VAL;
+ return i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_KEYLIGHT_REG, keylight);
+}
+/* get current keylight intensity */
+int sx1_getkeylight(u8 * keylight)
+{
+ return i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_KEYLIGHT_REG, keylight);
+}
+/* set LCD backlight intensity */
+int sx1_setbacklight(u8 backlight)
+{
+ if (backlight > SOFIA_MAX_LIGHT_VAL)
+ backlight = SOFIA_MAX_LIGHT_VAL;
+ return i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_BACKLIGHT_REG, backlight);
+}
+/* get current LCD backlight intensity */
+int sx1_getbacklight (u8 * backlight)
+{
+ return i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_BACKLIGHT_REG, backlight);
+}
+/* set LCD backlight power on/off */
+int sx1_setmmipower(u8 onoff)
+{
+ int err;
+ u8 dat = 0;
+ err = i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, &dat);
+ if (err < 0)
+ return err;
+ if (onoff)
+ dat |= SOFIA_MMILIGHT_POWER;
+ else
+ dat &= ~SOFIA_MMILIGHT_POWER;
+ return i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, dat);
+}
+/* set MMC power on/off */
+int sx1_setmmcpower(u8 onoff)
+{
+ int err;
+ u8 dat = 0;
+ err = i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, &dat);
+ if (err < 0)
+ return err;
+ if (onoff)
+ dat |= SOFIA_MMC_POWER;
+ else
+ dat &= ~SOFIA_MMC_POWER;
+ return i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, dat);
+}
+/* set USB power on/off */
+int sx1_setusbpower(u8 onoff)
+{
+ int err;
+ u8 dat = 0;
+ err = i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, &dat);
+ if (err < 0)
+ return err;
+ if (onoff)
+ dat |= SOFIA_USB_POWER;
+ else
+ dat &= ~SOFIA_USB_POWER;
+ return i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, dat);
+}
+
+EXPORT_SYMBOL(sx1_setkeylight);
+EXPORT_SYMBOL(sx1_getkeylight);
+EXPORT_SYMBOL(sx1_setbacklight);
+EXPORT_SYMBOL(sx1_getbacklight);
+EXPORT_SYMBOL(sx1_setmmipower);
+EXPORT_SYMBOL(sx1_setmmcpower);
+EXPORT_SYMBOL(sx1_setusbpower);
+
+/*----------- Keypad -------------------------*/
+
+static int sx1_keymap[] = {
+ KEY(5, 3, GROUP_0 | 117), /* camera Qt::Key_F17 */
+ KEY(0, 4, GROUP_0 | 114), /* voice memo Qt::Key_F14 */
+ KEY(1, 4, GROUP_2 | 114), /* voice memo */
+ KEY(2, 4, GROUP_3 | 114), /* voice memo */
+ KEY(0, 0, GROUP_1 | KEY_F12), /* red button Qt::Key_Hangup */
+ KEY(4, 3, GROUP_1 | KEY_LEFT),
+ KEY(2, 3, GROUP_1 | KEY_DOWN),
+ KEY(1, 3, GROUP_1 | KEY_RIGHT),
+ KEY(0, 3, GROUP_1 | KEY_UP),
+ KEY(3, 3, GROUP_1 | KEY_POWER), /* joystick press or Qt::Key_Select */
+ KEY(5, 0, GROUP_1 | KEY_1),
+ KEY(4, 0, GROUP_1 | KEY_2),
+ KEY(3, 0, GROUP_1 | KEY_3),
+ KEY(3, 4, GROUP_1 | KEY_4),
+ KEY(4, 4, GROUP_1 | KEY_5),
+ KEY(5, 4, GROUP_1 | KEY_KPASTERISK),/* "*" */
+ KEY(4, 1, GROUP_1 | KEY_6),
+ KEY(5, 1, GROUP_1 | KEY_7),
+ KEY(3, 1, GROUP_1 | KEY_8),
+ KEY(3, 2, GROUP_1 | KEY_9),
+ KEY(5, 2, GROUP_1 | KEY_0),
+ KEY(4, 2, GROUP_1 | 113), /* # F13 Toggle input method Qt::Key_F13 */
+ KEY(0, 1, GROUP_1 | KEY_F11), /* green button Qt::Key_Call */
+ KEY(1, 2, GROUP_1 | KEY_YEN), /* left soft Qt::Key_Context1 */
+ KEY(2, 2, GROUP_1 | KEY_F8), /* right soft Qt::Key_Back */
+ KEY(2, 1, GROUP_1 | KEY_LEFTSHIFT), /* shift */
+ KEY(1, 1, GROUP_1 | KEY_BACKSPACE), /* C (clear) */
+ KEY(0, 2, GROUP_1 | KEY_F7), /* menu Qt::Key_Menu */
+ 0
+};
+
+static struct resource sx1_kp_resources[] = {
+ [0] = {
+ .start = INT_KEYBOARD,
+ .end = INT_KEYBOARD,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct omap_kp_platform_data sx1_kp_data = {
+ .rows = 6,
+ .cols = 6,
+ .keymap = sx1_keymap,
+ .keymapsize = ARRAY_SIZE(sx1_keymap),
+ .delay = 80,
+};
+
+static struct platform_device sx1_kp_device = {
+ .name = "omap-keypad",
+ .id = -1,
+ .dev = {
+ .platform_data = &sx1_kp_data,
+ },
+ .num_resources = ARRAY_SIZE(sx1_kp_resources),
+ .resource = sx1_kp_resources,
+};
+
+/*----------- IRDA -------------------------*/
+
+static struct omap_irda_config sx1_irda_data = {
+ .transceiver_cap = IR_SIRMODE,
+ .rx_channel = OMAP_DMA_UART3_RX,
+ .tx_channel = OMAP_DMA_UART3_TX,
+ .dest_start = UART3_THR,
+ .src_start = UART3_RHR,
+ .tx_trigger = 0,
+ .rx_trigger = 0,
+};
+
+static struct resource sx1_irda_resources[] = {
+ [0] = {
+ .start = INT_UART3,
+ .end = INT_UART3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 irda_dmamask = 0xffffffff;
+
+static struct platform_device sx1_irda_device = {
+ .name = "omapirda",
+ .id = 0,
+ .dev = {
+ .platform_data = &sx1_irda_data,
+ .dma_mask = &irda_dmamask,
+ },
+ .num_resources = ARRAY_SIZE(sx1_irda_resources),
+ .resource = sx1_irda_resources,
+};
+
+/*----------- McBSP & Sound -------------------------*/
+
+/* Playback interface - McBSP1 */
+static struct omap_mcbsp_reg_cfg mcbsp1_regs = {
+ .spcr2 = XINTM(3), /* SPCR2=30 */
+ .spcr1 = RINTM(3), /* SPCR1=30 */
+ .rcr2 = 0, /* RCR2 =00 */
+ .rcr1 = RFRLEN1(1) | RWDLEN1(OMAP_MCBSP_WORD_16), /* RCR1=140 */
+ .xcr2 = 0, /* XCR2 = 0 */
+ .xcr1 = XFRLEN1(1) | XWDLEN1(OMAP_MCBSP_WORD_16), /* XCR1 = 140 */
+ .srgr1 = FWID(15) | CLKGDV(12), /* SRGR1=0f0c */
+ .srgr2 = FSGM | FPER(31), /* SRGR2=101f */
+ .pcr0 = FSXM | FSRM | CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP,
+ /* PCR0 =0f0f */
+};
+
+/* TODO: PCM interface - McBSP2 */
+static struct omap_mcbsp_reg_cfg mcbsp2_regs = {
+ .spcr2 = FRST | GRST | XRST | XINTM(3), /* SPCR2=F1 */
+ .spcr1 = RINTM(3) | RRST, /* SPCR1=30 */
+ .rcr2 = 0, /* RCR2 =00 */
+ .rcr1 = RFRLEN1(1) | RWDLEN1(OMAP_MCBSP_WORD_16), /* RCR1 = 140 */
+ .xcr2 = 0, /* XCR2 = 0 */
+ .xcr1 = XFRLEN1(1) | XWDLEN1(OMAP_MCBSP_WORD_16), /* XCR1 = 140 */
+ .srgr1 = FWID(15) | CLKGDV(12), /* SRGR1=0f0c */
+ .srgr2 = FSGM | FPER(31), /* SRGR2=101f */
+ .pcr0 = FSXM | FSRM | CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP,
+ /* PCR0=0f0f */
+ /* mcbsp: slave */
+};
+
+static struct omap_alsa_codec_config sx1_alsa_config = {
+ .name = "SX1 EGold",
+ .mcbsp_regs_alsa = &mcbsp1_regs,
+};
+
+static struct platform_device sx1_mcbsp1_device = {
+ .name = "omap_alsa_mcbsp",
+ .id = 1,
+ .dev = {
+ .platform_data = &sx1_alsa_config,
+ },
+};
+
+/*----------- MTD -------------------------*/
+
+static struct mtd_partition sx1_partitions[] = {
+ /* bootloader (U-Boot, etc) in first sector */
+ {
+ .name = "bootloader",
+ .offset = 0x01800000,
+ .size = SZ_128K,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ /* bootloader params in the next sector */
+ {
+ .name = "params",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_128K,
+ .mask_flags = 0,
+ },
+ /* kernel */
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_2M - 2 * SZ_128K,
+ .mask_flags = 0
+ },
+ /* file system */
+ {
+ .name = "filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0
+ }
+};
+
+static struct flash_platform_data sx1_flash_data = {
+ .map_name = "cfi_probe",
+ .width = 2,
+ .parts = sx1_partitions,
+ .nr_parts = ARRAY_SIZE(sx1_partitions),
+};
+
+#ifdef CONFIG_SX1_OLD_FLASH
+/* MTD Intel StrataFlash - old flashes */
+static struct resource sx1_old_flash_resource[] = {
+ [0] = {
+ .start = OMAP_CS0_PHYS, /* Physical */
+ .end = OMAP_CS0_PHYS + SZ_16M - 1,,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = OMAP_CS1_PHYS,
+ .end = OMAP_CS1_PHYS + SZ_8M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device sx1_flash_device = {
+ .name = "omapflash",
+ .id = 0,
+ .dev = {
+ .platform_data = &sx1_flash_data,
+ },
+ .num_resources = 2,
+ .resource = &sx1_old_flash_resource,
+};
+#else
+/* MTD Intel 4000 flash - new flashes */
+static struct resource sx1_new_flash_resource = {
+ .start = OMAP_CS0_PHYS,
+ .end = OMAP_CS0_PHYS + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device sx1_flash_device = {
+ .name = "omapflash",
+ .id = 0,
+ .dev = {
+ .platform_data = &sx1_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &sx1_new_flash_resource,
+};
+#endif
+
+/*----------- USB -------------------------*/
+
+static struct omap_usb_config sx1_usb_config __initdata = {
+ .otg = 0,
+ .register_dev = 1,
+ .register_host = 0,
+ .hmc_mode = 0,
+ .pins[0] = 2,
+ .pins[1] = 0,
+ .pins[2] = 0,
+};
+
+/*----------- MMC -------------------------*/
+
+static struct omap_mmc_config sx1_mmc_config __initdata = {
+ .mmc [0] = {
+ .enabled = 1,
+ .wire4 = 0,
+ .wp_pin = -1,
+ .power_pin = -1, /* power is in Sofia */
+ .switch_pin = OMAP_MPUIO(3),
+ },
+};
+
+/*----------- LCD -------------------------*/
+
+static struct platform_device sx1_lcd_device = {
+ .name = "lcd_sx1",
+ .id = -1,
+};
+
+static struct omap_lcd_config sx1_lcd_config __initdata = {
+ .ctrl_name = "internal",
+};
+
+/*-----------------------------------------*/
+static struct platform_device *sx1_devices[] __initdata = {
+ &sx1_flash_device,
+ &sx1_kp_device,
+ &sx1_lcd_device,
+ &sx1_mcbsp1_device,
+ &sx1_irda_device,
+};
+/*-----------------------------------------*/
+
+static struct omap_uart_config sx1_uart_config __initdata = {
+ .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct omap_board_config_kernel sx1_config[] = {
+ { OMAP_TAG_USB, &sx1_usb_config },
+ { OMAP_TAG_MMC, &sx1_mmc_config },
+ { OMAP_TAG_LCD, &sx1_lcd_config },
+ { OMAP_TAG_UART, &sx1_uart_config },
+};
+/*-----------------------------------------*/
+static void __init omap_sx1_init(void)
+{
+ platform_add_devices(sx1_devices, ARRAY_SIZE(sx1_devices));
+
+ omap_board_config = sx1_config;
+ omap_board_config_size = ARRAY_SIZE(sx1_config);
+ omap_serial_init();
+
+ /* turn on USB power */
+ /* sx1_setusbpower(1); cant do it here because i2c is not ready */
+ omap_request_gpio(1); /* A_IRDA_OFF */
+ omap_request_gpio(11); /* A_SWITCH */
+ omap_request_gpio(15); /* A_USB_ON */
+ omap_set_gpio_direction(1, 0);/* gpio1 -> output */
+ omap_set_gpio_direction(11, 0);/* gpio11 -> output */
+ omap_set_gpio_direction(15, 0);/* gpio15 -> output */
+ /* set GPIO data */
+ omap_set_gpio_dataout(1, 1);/*A_IRDA_OFF = 1 */
+ omap_set_gpio_dataout(11, 0);/*A_SWITCH = 0 */
+ omap_set_gpio_dataout(15, 0);/*A_USB_ON = 0 */
+
+}
+/*----------------------------------------*/
+static void __init omap_sx1_init_irq(void)
+{
+ omap1_init_common_hw();
+ omap_init_irq();
+ omap_gpio_init();
+}
+/*----------------------------------------*/
+
+static void __init omap_sx1_map_io(void)
+{
+ omap1_map_common_io();
+}
+
+MACHINE_START(SX1, "OMAP310 based Siemens SX1")
+ .phys_io = 0xfff00000,
+ .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
+ .boot_params = 0x10000100,
+ .map_io = omap_sx1_map_io,
+ .init_irq = omap_sx1_init_irq,
+ .init_machine = omap_sx1_init,
+ .timer = &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 447a586eb334..214dd19889ac 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -235,7 +235,7 @@ static struct notifier_block panic_block = {
static int __init voiceblue_setup(void)
{
/* Setup panic notifier */
- notifier_chain_register(&panic_notifier_list, &panic_block);
+ atomic_notifier_chain_register(&panic_notifier_list, &panic_block);
return 0;
}
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index f625f6dd228a..5d9faa68d2ec 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -49,6 +49,15 @@ static void omap1_uart_recalc(struct clk * clk)
clk->rate = 12000000;
}
+static void omap1_sossi_recalc(struct clk *clk)
+{
+ u32 div = omap_readl(MOD_CONF_CTRL_1);
+
+ div = (div >> 17) & 0x7;
+ div++;
+ clk->rate = clk->parent->rate / div;
+}
+
static int omap1_clk_enable_dsp_domain(struct clk *clk)
{
int retval;
@@ -396,6 +405,31 @@ static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate)
return 0;
}
+static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate)
+{
+ u32 l;
+ int div;
+ unsigned long p_rate;
+
+ p_rate = clk->parent->rate;
+ /* Round towards slower frequency */
+ div = (p_rate + rate - 1) / rate;
+ div--;
+ if (div < 0 || div > 7)
+ return -EINVAL;
+
+ l = omap_readl(MOD_CONF_CTRL_1);
+ l &= ~(7 << 17);
+ l |= div << 17;
+ omap_writel(l, MOD_CONF_CTRL_1);
+
+ clk->rate = p_rate / (div + 1);
+ if (unlikely(clk->flags & RATE_PROPAGATES))
+ propagate_rate(clk);
+
+ return 0;
+}
+
static long omap1_round_ext_clk_rate(struct clk * clk, unsigned long rate)
{
return 96000000 / calc_ext_dsor(rate);
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
index f7df00205c4a..6eadf72828d8 100644
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -17,6 +17,8 @@ static int omap1_clk_enable_generic(struct clk * clk);
static void omap1_clk_disable_generic(struct clk * clk);
static void omap1_ckctl_recalc(struct clk * clk);
static void omap1_watchdog_recalc(struct clk * clk);
+static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate);
+static void omap1_sossi_recalc(struct clk *clk);
static void omap1_ckctl_recalc_dsp_domain(struct clk * clk);
static int omap1_clk_enable_dsp_domain(struct clk * clk);
static int omap1_clk_set_rate_dsp_domain(struct clk * clk, unsigned long rate);
@@ -168,9 +170,10 @@ static struct clk ck_dpll1 = {
static struct arm_idlect1_clk ck_dpll1out = {
.clk = {
- .name = "ck_dpll1out",
+ .name = "ck_dpll1out",
.parent = &ck_dpll1,
- .flags = CLOCK_IN_OMAP16XX | CLOCK_IDLE_CONTROL,
+ .flags = CLOCK_IN_OMAP16XX | CLOCK_IDLE_CONTROL |
+ ENABLE_REG_32BIT | RATE_PROPAGATES,
.enable_reg = (void __iomem *)ARM_IDLECT2,
.enable_bit = EN_CKOUT_ARM,
.recalc = &followparent_recalc,
@@ -180,6 +183,19 @@ static struct arm_idlect1_clk ck_dpll1out = {
.idlect_shift = 12,
};
+static struct clk sossi_ck = {
+ .name = "ck_sossi",
+ .parent = &ck_dpll1out.clk,
+ .flags = CLOCK_IN_OMAP16XX | CLOCK_NO_IDLE_PARENT |
+ ENABLE_REG_32BIT,
+ .enable_reg = (void __iomem *)MOD_CONF_CTRL_1,
+ .enable_bit = 16,
+ .recalc = &omap1_sossi_recalc,
+ .set_rate = &omap1_set_sossi_rate,
+ .enable = &omap1_clk_enable_generic,
+ .disable = &omap1_clk_disable_generic,
+};
+
static struct clk arm_ck = {
.name = "arm_ck",
.parent = &ck_dpll1,
@@ -282,7 +298,7 @@ static struct clk arminth_ck16xx = {
static struct clk dsp_ck = {
.name = "dsp_ck",
.parent = &ck_dpll1,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+ .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
RATE_CKCTL,
.enable_reg = (void __iomem *)ARM_CKCTL,
.enable_bit = EN_DSPCK,
@@ -295,7 +311,7 @@ static struct clk dsp_ck = {
static struct clk dspmmu_ck = {
.name = "dspmmu_ck",
.parent = &ck_dpll1,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+ .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
RATE_CKCTL | ALWAYS_ENABLED,
.rate_offset = CKCTL_DSPMMUDIV_OFFSET,
.recalc = &omap1_ckctl_recalc,
@@ -306,7 +322,7 @@ static struct clk dspmmu_ck = {
static struct clk dspper_ck = {
.name = "dspper_ck",
.parent = &ck_dpll1,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+ .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
RATE_CKCTL | VIRTUAL_IO_ADDRESS,
.enable_reg = (void __iomem *)DSP_IDLECT2,
.enable_bit = EN_PERCK,
@@ -320,7 +336,7 @@ static struct clk dspper_ck = {
static struct clk dspxor_ck = {
.name = "dspxor_ck",
.parent = &ck_ref,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+ .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
VIRTUAL_IO_ADDRESS,
.enable_reg = (void __iomem *)DSP_IDLECT2,
.enable_bit = EN_XORPCK,
@@ -332,7 +348,7 @@ static struct clk dspxor_ck = {
static struct clk dsptim_ck = {
.name = "dsptim_ck",
.parent = &ck_ref,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+ .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
VIRTUAL_IO_ADDRESS,
.enable_reg = (void __iomem *)DSP_IDLECT2,
.enable_bit = EN_DSPTIMCK,
@@ -374,7 +390,7 @@ static struct clk arminth_ck1510 = {
static struct clk tipb_ck = {
/* No-idle controlled by "tc_ck" */
- .name = "tibp_ck",
+ .name = "tipb_ck",
.parent = &tc_ck.clk,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
ALWAYS_ENABLED,
@@ -733,7 +749,7 @@ remains active during MPU idle whenever this is enabled */
static struct clk i2c_fck = {
.name = "i2c_fck",
.id = 1,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+ .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
VIRTUAL_CLOCK | CLOCK_NO_IDLE_PARENT |
ALWAYS_ENABLED,
.parent = &armxor_ck.clk,
@@ -760,6 +776,7 @@ static struct clk * onchip_clks[] = {
&ck_dpll1,
/* CK_GEN1 clocks */
&ck_dpll1out.clk,
+ &sossi_ck,
&arm_ck,
&armper_ck.clk,
&arm_gpio_ck,
diff --git a/arch/arm/mach-omap1/leds-innovator.c b/arch/arm/mach-omap1/leds-innovator.c
index a0cd001ac39a..e7835d6f53a0 100644
--- a/arch/arm/mach-omap1/leds-innovator.c
+++ b/arch/arm/mach-omap1/leds-innovator.c
@@ -95,8 +95,5 @@ void innovator_leds_event(led_event_t evt)
break;
}
- if (led_state & LED_STATE_ENABLED)
- ;
-
local_irq_restore(flags);
}
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
index 5432335bc493..52c70e5fcf65 100644
--- a/arch/arm/mach-omap1/mux.c
+++ b/arch/arm/mach-omap1/mux.c
@@ -283,6 +283,30 @@ MUX_CFG("R11_1610_CF_IOIS16", B, 0, 3, 2, 16, 1, 2, 1, 1)
MUX_CFG("V10_1610_CF_IREQ", A, 24, 3, 2, 14, 0, 2, 0, 1)
MUX_CFG("W10_1610_CF_RESET", A, 18, 3, 2, 12, 1, 2, 1, 1)
MUX_CFG("W11_1610_CF_CD1", 10, 15, 3, 3, 8, 1, 3, 1, 1)
+
+/* parallel camera */
+MUX_CFG("J15_1610_CAM_LCLK", 4, 24, 0, 0, 18, 1, 0, 0, 0)
+MUX_CFG("J18_1610_CAM_D7", 4, 27, 0, 0, 19, 1, 0, 0, 0)
+MUX_CFG("J19_1610_CAM_D6", 5, 0, 0, 0, 20, 1, 0, 0, 0)
+MUX_CFG("J14_1610_CAM_D5", 5, 3, 0, 0, 21, 1, 0, 0, 0)
+MUX_CFG("K18_1610_CAM_D4", 5, 6, 0, 0, 22, 1, 0, 0, 0)
+MUX_CFG("K19_1610_CAM_D3", 5, 9, 0, 0, 23, 1, 0, 0, 0)
+MUX_CFG("K15_1610_CAM_D2", 5, 12, 0, 0, 24, 1, 0, 0, 0)
+MUX_CFG("K14_1610_CAM_D1", 5, 15, 0, 0, 25, 1, 0, 0, 0)
+MUX_CFG("L19_1610_CAM_D0", 5, 18, 0, 0, 26, 1, 0, 0, 0)
+MUX_CFG("L18_1610_CAM_VS", 5, 21, 0, 0, 27, 1, 0, 0, 0)
+MUX_CFG("L15_1610_CAM_HS", 5, 24, 0, 0, 28, 1, 0, 0, 0)
+MUX_CFG("M19_1610_CAM_RSTZ", 5, 27, 0, 0, 29, 0, 0, 0, 0)
+MUX_CFG("Y15_1610_CAM_OUTCLK", A, 0, 6, 2, 6, 0, 2, 0, 0)
+
+/* serial camera */
+MUX_CFG("H19_1610_CAM_EXCLK", 4, 21, 0, 0, 17, 0, 0, 0, 0)
+ /* REVISIT 5912 spec sez CCP_* can't pullup or pulldown ... ? */
+MUX_CFG("Y12_1610_CCP_CLKP", 8, 18, 6, 1, 24, 1, 1, 0, 0)
+MUX_CFG("W13_1610_CCP_CLKM", 9, 0, 6, 1, 28, 1, 1, 0, 0)
+MUX_CFG("W14_1610_CCP_DATAP", 9, 24, 6, 2, 4, 1, 2, 0, 0)
+MUX_CFG("Y14_1610_CCP_DATAM", 9, 21, 6, 2, 3, 1, 2, 0, 0)
+
};
#endif /* CONFIG_ARCH_OMAP15XX || CONFIG_ARCH_OMAP16XX */
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 2e68be607295..089b8208de0e 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -153,11 +153,8 @@ void omap_pm_idle(void)
use_idlect1 = omap_dm_timer_modify_idlect_mask(use_idlect1);
#endif
- if (omap_dma_running()) {
+ if (omap_dma_running())
use_idlect1 &= ~(1 << 6);
- if (omap_lcd_dma_ext_running())
- use_idlect1 &= ~(1 << 12);
- }
/* We should be able to remove the do_sleep variable and multiple
* tests above as soon as drivers, timer and DMA code have been fixed.