MIPS: Alchemy: rename directory

It's more than the au1000 these days.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 0 insertions, 160 deletions

diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c
deleted file mode 100644
index 1ac6b06f42a3..000000000000
--- a/arch/mips/au1000/common/setup.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * Copyright 2000, 2007-2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com
- *
- * Updates to 2.6, Pete Popov, Embedded Alley Solutions, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/module.h>
-#include <linux/pm.h>
-
-#include <asm/mipsregs.h>
-#include <asm/reboot.h>
-#include <asm/time.h>
-
-#include <au1000.h>
-#include <prom.h>
-
-extern void __init board_setup(void);
-extern void au1000_restart(char *);
-extern void au1000_halt(void);
-extern void au1000_power_off(void);
-extern void set_cpuspec(void);
-
-void __init plat_mem_setup(void)
-{
-	struct	cpu_spec *sp;
-	char *argptr;
-	unsigned long prid, cpufreq, bclk;
-
-	set_cpuspec();
-	sp = cur_cpu_spec[0];
-
-	board_setup();  /* board specific setup */
-
-	prid = read_c0_prid();
-	if (sp->cpu_pll_wo)
-#ifdef CONFIG_SOC_AU1000_FREQUENCY
-		cpufreq = CONFIG_SOC_AU1000_FREQUENCY / 1000000;
-#else
-		cpufreq = 396;
-#endif
-	else
-		cpufreq = (au_readl(SYS_CPUPLL) & 0x3F) * 12;
-	printk(KERN_INFO "(PRID %08lx) @ %ld MHz\n", prid, cpufreq);
-
-	if (sp->cpu_bclk) {
-		/* Enable BCLK switching */
-		bclk = au_readl(SYS_POWERCTRL);
-		au_writel(bclk | 0x60, SYS_POWERCTRL);
-		printk(KERN_INFO "BCLK switching enabled!\n");
-	}
-
-	if (sp->cpu_od)
-		/* Various early Au1xx0 errata corrected by this */
-		set_c0_config(1 << 19); /* Set Config[OD] */
-	else
-		/* Clear to obtain best system bus performance */
-		clear_c0_config(1 << 19); /* Clear Config[OD] */
-
-	argptr = prom_getcmdline();
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-	argptr = strstr(argptr, "console=");
-	if (argptr == NULL) {
-		argptr = prom_getcmdline();
-		strcat(argptr, " console=ttyS0,115200");
-	}
-#endif
-
-#ifdef CONFIG_FB_AU1100
-	argptr = strstr(argptr, "video=");
-	if (argptr == NULL) {
-		argptr = prom_getcmdline();
-		/* default panel */
-		/*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
-	}
-#endif
-
-#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
-	/* au1000 does not support vra, au1500 and au1100 do */
-	strcat(argptr, " au1000_audio=vra");
-	argptr = prom_getcmdline();
-#endif
-	_machine_restart = au1000_restart;
-	_machine_halt = au1000_halt;
-	pm_power_off = au1000_power_off;
-
-	/* IO/MEM resources. */
-	set_io_port_base(0);
-	ioport_resource.start = IOPORT_RESOURCE_START;
-	ioport_resource.end = IOPORT_RESOURCE_END;
-	iomem_resource.start = IOMEM_RESOURCE_START;
-	iomem_resource.end = IOMEM_RESOURCE_END;
-
-	while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_E0S);
-	au_writel(SYS_CNTRL_E0 | SYS_CNTRL_EN0, SYS_COUNTER_CNTRL);
-	au_sync();
-	while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T0S);
-	au_writel(0, SYS_TOYTRIM);
-}
-
-#if defined(CONFIG_64BIT_PHYS_ADDR)
-/* This routine should be valid for all Au1x based boards */
-phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size)
-{
-	/* Don't fixup 36-bit addresses */
-	if ((phys_addr >> 32) != 0)
-		return phys_addr;
-
-#ifdef CONFIG_PCI
-	{
-		u32 start = (u32)Au1500_PCI_MEM_START;
-		u32 end   = (u32)Au1500_PCI_MEM_END;
-
-		/* Check for PCI memory window */
-		if (phys_addr >= start && (phys_addr + size - 1) <= end)
-			return (phys_t)
-			       ((phys_addr - start) + Au1500_PCI_MEM_START);
-	}
-#endif
-
-	/*
-	 * All Au1xx0 SOCs have a PCMCIA controller.
-	 * We setup our 32-bit pseudo addresses to be equal to the
-	 * 36-bit addr >> 4, to make it easier to check the address
-	 * and fix it.
-	 * The PCMCIA socket 0 physical attribute address is 0xF 4000 0000.
-	 * The pseudo address we use is 0xF400 0000. Any address over
-	 * 0xF400 0000 is a PCMCIA pseudo address.
-	 */
-	if ((phys_addr >= 0xF4000000) && (phys_addr < 0xFFFFFFFF))
-		return (phys_t)(phys_addr << 4);
-
-	/* default nop */
-	return phys_addr;
-}
-EXPORT_SYMBOL(__fixup_bigphys_addr);
-#endif