MIPS: Alchemy: rename directory

It's more than the au1000 these days.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 0 insertions, 108 deletions

diff --git a/arch/mips/au1000/db1x00/board_setup.c b/arch/mips/au1000/db1x00/board_setup.c
deleted file mode 100644
index 9e5ccbbfcedd..000000000000
--- a/arch/mips/au1000/db1x00/board_setup.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *	Alchemy Db1x00 board setup.
- *
- * Copyright 2000, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-
-#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-db1x00/db1x00.h>
-
-static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
-
-void board_reset(void)
-{
-	/* Hit BCSR.SW_RESET[RESET] */
-	bcsr->swreset = 0x0000;
-}
-
-void __init board_setup(void)
-{
-	u32 pin_func = 0;
-
-	/* Not valid for Au1550 */
-#if defined(CONFIG_IRDA) && \
-   (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100))
-	/* Set IRFIRSEL instead of GPIO15 */
-	pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF;
-	au_writel(pin_func, SYS_PINFUNC);
-	/* Power off until the driver is in use */
-	bcsr->resets &= ~BCSR_RESETS_IRDA_MODE_MASK;
-	bcsr->resets |=  BCSR_RESETS_IRDA_MODE_OFF;
-	au_sync();
-#endif
-	bcsr->pcmcia = 0x0000; /* turn off PCMCIA power */
-
-#ifdef CONFIG_MIPS_MIRAGE
-	/* Enable GPIO[31:0] inputs */
-	au_writel(0, SYS_PININPUTEN);
-
-	/* GPIO[20] is output, tristate the other input primary GPIOs */
-	au_writel(~(1 << 20), SYS_TRIOUTCLR);
-
-	/* Set GPIO[210:208] instead of SSI_0 */
-	pin_func = au_readl(SYS_PINFUNC) | SYS_PF_S0;
-
-	/* Set GPIO[215:211] for LEDs */
-	pin_func |= 5 << 2;
-
-	/* Set GPIO[214:213] for more LEDs */
-	pin_func |= 5 << 12;
-
-	/* Set GPIO[207:200] instead of PCMCIA/LCD */
-	pin_func |= SYS_PF_LCD | SYS_PF_PC;
-	au_writel(pin_func, SYS_PINFUNC);
-
-	/*
-	 * Enable speaker amplifier.  This should
-	 * be part of the audio driver.
-	 */
-	au_writel(au_readl(GPIO2_DIR) | 0x200, GPIO2_DIR);
-	au_writel(0x02000200, GPIO2_OUTPUT);
-#endif
-
-	au_sync();
-
-#ifdef CONFIG_MIPS_DB1000
-	printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n");
-#endif
-#ifdef CONFIG_MIPS_DB1500
-	printk(KERN_INFO "AMD Alchemy Au1500/Db1500 Board\n");
-#endif
-#ifdef CONFIG_MIPS_DB1100
-	printk(KERN_INFO "AMD Alchemy Au1100/Db1100 Board\n");
-#endif
-#ifdef CONFIG_MIPS_BOSPORUS
-	printk(KERN_INFO "AMD Alchemy Bosporus Board\n");
-#endif
-#ifdef CONFIG_MIPS_MIRAGE
-	printk(KERN_INFO "AMD Alchemy Mirage Board\n");
-#endif
-#ifdef CONFIG_MIPS_DB1550
-	printk(KERN_INFO "AMD Alchemy Au1550/Db1550 Board\n");
-#endif
-}