summaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms/85xx/Kconfig
diff options
context:
space:
mode:
authorTimur Tabi <timur@freescale.com>2012-07-26 10:08:54 -0500
committerKumar Gala <galak@kernel.crashing.org>2012-09-12 14:57:07 -0500
commit4c30c143f02f1ab8d9740c61db1ce335a5f95095 (patch)
tree3ff0fd5e848e03e89436411e776cde6c404e1602 /arch/powerpc/platforms/85xx/Kconfig
parent7a4da6f70b28b3f66d5650e06fed90f7c608c0e1 (diff)
powerpc/85xx: Add support for P5040DS board
Add support for the Freescale P5040DS Reference Board ("Superhydra"), which is similar to the P5020DS. Features of the P5040 are listed below, but not all of these features (e.g. DPAA networking) are currently supported. Four P5040 single-threaded e5500 cores built Up to 2.4 GHz with 64-bit ISA support Three levels of instruction: user, supervisor, hypervisor CoreNet platform cache (CPC) 2.0 MB configures as dual 1 MB blocks hierarchical interconnect fabric Two 64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving support Up to 1600MT/s Memory pre-fetch engine DPAA incorporating acceleration for the following functions Packet parsing, classification, and distribution (FMAN) Queue management for scheduling, packet sequencing and congestion management (QMAN) Hardware buffer management for buffer allocation and de-allocation (BMAN) Cryptography acceleration (SEC 5.0) at up to 40 Gbps SerDes 20 lanes at up to 5 Gbps Supports SGMII, XAUI, PCIe rev1.1/2.0, SATA Ethernet interfaces Two 10 Gbps Ethernet MACs Ten 1 Gbps Ethernet MACs High-speed peripheral interfaces Two PCI Express 2.0/3.0 controllers Additional peripheral interfaces Two serial ATA (SATA 2.0) controllers Two high-speed USB 2.0 controllers with integrated PHY Enhanced secure digital host controller (SD/MMC/eMMC) Enhanced serial peripheral interface (eSPI) Two I2C controllers Four UARTs Integrated flash controller supporting NAND and NOR flash DMA Dual four channel Support for hardware virtualization and partitioning enforcement Extra privileged level for hypervisor support QorIQ Trust Architecture 1.1 Secure boot, secure debug, tamper detection, volatile key storage Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Diffstat (limited to 'arch/powerpc/platforms/85xx/Kconfig')
-rw-r--r--arch/powerpc/platforms/85xx/Kconfig14
1 files changed, 14 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 159c01e91463..31f0618ec677 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -254,6 +254,20 @@ config P5020_DS
help
This option enables support for the P5020 DS board
+config P5040_DS
+ bool "Freescale P5040 DS"
+ select DEFAULT_UIMAGE
+ select E500
+ select PPC_E500MC
+ select PHYS_64BIT
+ select SWIOTLB
+ select ARCH_REQUIRE_GPIOLIB
+ select GPIO_MPC8XXX
+ select HAS_RAPIDIO
+ select PPC_EPAPR_HV_PIC
+ help
+ This option enables support for the P5040 DS board
+
config PPC_QEMU_E500
bool "QEMU generic e500 platform"
depends on EXPERIMENTAL