summaryrefslogtreecommitdiff
path: root/arch/ppc/kernel/setup.c
diff options
context:
space:
mode:
authorPaul Mackerras <paulus@samba.org>2006-03-28 10:22:10 +1100
committerPaul Mackerras <paulus@samba.org>2006-03-28 10:22:10 +1100
commit0a26b1364f14852bc9a51db0ca63c5250c775627 (patch)
tree83422473cb4bf4c450012cded06288a0dc6abedf /arch/ppc/kernel/setup.c
parentff2e6d7e27cf1f757ab0d97e1a9e46de47152a0e (diff)
ppc: Remove CHRP, POWER3 and POWER4 support from arch/ppc
32-bit CHRP machines are now supported only in arch/powerpc, as are all 64-bit PowerPC processors. This means that we don't use Open Firmware on any platform in arch/ppc any more. This makes PReP support a single-platform option like every other platform support option in arch/ppc now, thus CONFIG_PPC_MULTIPLATFORM is gone from arch/ppc. CONFIG_PPC_PREP is the option that selects PReP support and is generally what has replaced CONFIG_PPC_MULTIPLATFORM within arch/ppc. _machine is all but dead now, being #defined to 0. Updated Makefiles, comments and Kconfig options generally to reflect these changes. Signed-off-by: Paul Mackerras <paulus@samba.org>
Diffstat (limited to 'arch/ppc/kernel/setup.c')
-rw-r--r--arch/ppc/kernel/setup.c254
1 files changed, 7 insertions, 247 deletions
diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c
index 53e9deacee82..7eb91a2e818a 100644
--- a/arch/ppc/kernel/setup.c
+++ b/arch/ppc/kernel/setup.c
@@ -1,5 +1,5 @@
/*
- * Common prep/chrp boot and setup code.
+ * Common prep boot and setup code.
*/
#include <linux/config.h>
@@ -72,17 +72,12 @@ unsigned long ISA_DMA_THRESHOLD;
unsigned int DMA_MODE_READ;
unsigned int DMA_MODE_WRITE;
-#ifdef CONFIG_PPC_MULTIPLATFORM
-int _machine = 0;
-EXPORT_SYMBOL(_machine);
-
+#ifdef CONFIG_PPC_PREP
extern void prep_init(unsigned long r3, unsigned long r4,
unsigned long r5, unsigned long r6, unsigned long r7);
-extern void chrp_init(unsigned long r3, unsigned long r4,
- unsigned long r5, unsigned long r6, unsigned long r7);
dev_t boot_dev;
-#endif /* CONFIG_PPC_MULTIPLATFORM */
+#endif /* CONFIG_PPC_PREP */
int have_of;
EXPORT_SYMBOL(have_of);
@@ -319,72 +314,12 @@ early_init(int r3, int r4, int r5)
identify_cpu(offset, 0);
do_cpu_ftr_fixups(offset);
-#if defined(CONFIG_PPC_OF)
- reloc_got2(offset);
-
- /*
- * don't do anything on prep
- * for now, don't use bootinfo because it breaks yaboot 0.5
- * and assume that if we didn't find a magic number, we have OF
- */
- if (*(unsigned long *)(0) != 0xdeadc0de)
- phys = prom_init(r3, r4, (prom_entry)r5);
-
- reloc_got2(-offset);
-#endif
-
return phys;
}
-#ifdef CONFIG_PPC_OF
-/*
- * Assume here that all clock rates are the same in a
- * smp system. -- Cort
- */
-int
-of_show_percpuinfo(struct seq_file *m, int i)
-{
- struct device_node *cpu_node;
- u32 *fp;
- int s;
-
- cpu_node = find_type_devices("cpu");
- if (!cpu_node)
- return 0;
- for (s = 0; s < i && cpu_node->next; s++)
- cpu_node = cpu_node->next;
- fp = (u32 *)get_property(cpu_node, "clock-frequency", NULL);
- if (fp)
- seq_printf(m, "clock\t\t: %dMHz\n", *fp / 1000000);
- return 0;
-}
-
-void __init
-intuit_machine_type(void)
-{
- char *model;
- struct device_node *root;
-
- /* ask the OF info if we're a chrp or pmac */
- root = find_path_device("/");
- if (root != 0) {
- /* assume pmac unless proven to be chrp -- Cort */
- _machine = _MACH_Pmac;
- model = get_property(root, "device_type", NULL);
- if (model && !strncmp("chrp", model, 4))
- _machine = _MACH_chrp;
- else {
- model = get_property(root, "model", NULL);
- if (model && !strncmp(model, "IBM", 3))
- _machine = _MACH_chrp;
- }
- }
-}
-#endif
-
-#ifdef CONFIG_PPC_MULTIPLATFORM
+#ifdef CONFIG_PPC_PREP
/*
- * The PPC_MULTIPLATFORM version of platform_init...
+ * The PPC_PREP version of platform_init...
*/
void __init
platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
@@ -399,161 +334,9 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
parse_bootinfo(find_bootinfo());
- /* if we didn't get any bootinfo telling us what we are... */
- if (_machine == 0) {
- /* prep boot loader tells us if we're prep or not */
- if ( *(unsigned long *)(KERNELBASE) == (0xdeadc0de) )
- _machine = _MACH_prep;
- }
-
-#ifdef CONFIG_PPC_PREP
- /* not much more to do here, if prep */
- if (_machine == _MACH_prep) {
- prep_init(r3, r4, r5, r6, r7);
- return;
- }
-#endif
-
-#ifdef CONFIG_PPC_OF
- have_of = 1;
-
- /* prom_init has already been called from __start */
- if (boot_infos)
- relocate_nodes();
-
- /* If we aren't PReP, we can find out if we're Pmac
- * or CHRP with this. */
- if (_machine == 0)
- intuit_machine_type();
-
- /* finish_device_tree may need _machine defined. */
- finish_device_tree();
-
- /*
- * If we were booted via quik, r3 points to the physical
- * address of the command-line parameters.
- * If we were booted from an xcoff image (i.e. netbooted or
- * booted from floppy), we get the command line from the
- * bootargs property of the /chosen node.
- * If an initial ramdisk is present, r3 and r4
- * are used for initrd_start and initrd_size,
- * otherwise they contain 0xdeadbeef.
- */
- if (r3 >= 0x4000 && r3 < 0x800000 && r4 == 0) {
- strlcpy(cmd_line, (char *)r3 + KERNELBASE,
- sizeof(cmd_line));
- } else if (boot_infos != 0) {
- /* booted by BootX - check for ramdisk */
- if (boot_infos->kernelParamsOffset != 0)
- strlcpy(cmd_line, (char *) boot_infos
- + boot_infos->kernelParamsOffset,
- sizeof(cmd_line));
-#ifdef CONFIG_BLK_DEV_INITRD
- if (boot_infos->ramDisk) {
- initrd_start = (unsigned long) boot_infos
- + boot_infos->ramDisk;
- initrd_end = initrd_start + boot_infos->ramDiskSize;
- initrd_below_start_ok = 1;
- }
-#endif
- } else {
- struct device_node *chosen;
- char *p;
-
-#ifdef CONFIG_BLK_DEV_INITRD
- if (r3 && r4 && r4 != 0xdeadbeef) {
- if (r3 < KERNELBASE)
- r3 += KERNELBASE;
- initrd_start = r3;
- initrd_end = r3 + r4;
- ROOT_DEV = Root_RAM0;
- initrd_below_start_ok = 1;
- }
-#endif
- chosen = find_devices("chosen");
- if (chosen != NULL) {
- p = get_property(chosen, "bootargs", NULL);
- if (p && *p) {
- strlcpy(cmd_line, p, sizeof(cmd_line));
- }
- }
- }
-#ifdef CONFIG_ADB
- if (strstr(cmd_line, "adb_sync")) {
- extern int __adb_probe_sync;
- __adb_probe_sync = 1;
- }
-#endif /* CONFIG_ADB */
-
- switch (_machine) {
-#ifdef CONFIG_PPC_CHRP
- case _MACH_chrp:
- chrp_init(r3, r4, r5, r6, r7);
- break;
-#endif
- }
-#endif /* CONFIG_PPC_OF */
+ prep_init(r3, r4, r5, r6, r7);
}
-#endif /* CONFIG_PPC_MULTIPLATFORM */
-
-#ifdef CONFIG_PPC_OF
-#ifdef CONFIG_SERIAL_CORE_CONSOLE
-extern char *of_stdout_device;
-
-static int __init set_preferred_console(void)
-{
- struct device_node *prom_stdout;
- char *name;
- int offset = 0;
-
- if (of_stdout_device == NULL)
- return -ENODEV;
-
- /* The user has requested a console so this is already set up. */
- if (strstr(saved_command_line, "console="))
- return -EBUSY;
-
- prom_stdout = find_path_device(of_stdout_device);
- if (!prom_stdout)
- return -ENODEV;
-
- name = (char *)get_property(prom_stdout, "name", NULL);
- if (!name)
- return -ENODEV;
-
- if (strcmp(name, "serial") == 0) {
- int i;
- u32 *reg = (u32 *)get_property(prom_stdout, "reg", &i);
- if (i > 8) {
- switch (reg[1]) {
- case 0x3f8:
- offset = 0;
- break;
- case 0x2f8:
- offset = 1;
- break;
- case 0x898:
- offset = 2;
- break;
- case 0x890:
- offset = 3;
- break;
- default:
- /* We dont recognise the serial port */
- return -ENODEV;
- }
- }
- } else if (strcmp(name, "ch-a") == 0)
- offset = 0;
- else if (strcmp(name, "ch-b") == 0)
- offset = 1;
- else
- return -ENODEV;
- return add_preferred_console("ttyS", offset, NULL);
-}
-console_initcall(set_preferred_console);
-#endif /* CONFIG_SERIAL_CORE_CONSOLE */
-#endif /* CONFIG_PPC_OF */
+#endif /* CONFIG_PPC_PREP */
struct bi_record *find_bootinfo(void)
{
@@ -589,23 +372,6 @@ void parse_bootinfo(struct bi_record *rec)
initrd_end = data[0] + data[1] + KERNELBASE;
break;
#endif /* CONFIG_BLK_DEV_INITRD */
-#ifdef CONFIG_PPC_MULTIPLATFORM
- case BI_MACHTYPE:
- /* Machine types changed with the merge. Since the
- * bootinfo are now deprecated, we can just hard code
- * the appropriate conversion here for when we are
- * called with yaboot which passes us a machine type
- * this way.
- */
- switch(data[0]) {
- case 1: _machine = _MACH_prep; break;
- case 2: _machine = _MACH_Pmac; break;
- case 4: _machine = _MACH_chrp; break;
- default:
- _machine = data[0];
- }
- break;
-#endif
case BI_MEMSIZE:
boot_mem_size = data[0];
break;
@@ -631,9 +397,6 @@ machine_init(unsigned long r3, unsigned long r4, unsigned long r5,
#ifdef CONFIG_6xx
ppc_md.power_save = ppc6xx_idle;
#endif
-#ifdef CONFIG_POWER4
- ppc_md.power_save = power4_idle;
-#endif
platform_init(r3, r4, r5, r6, r7);
@@ -799,7 +562,4 @@ void __init setup_arch(char **cmdline_p)
if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab);
paging_init();
-
- /* this is for modules since _machine can be a define -- Cort */
- ppc_md.ppc_machine = _machine;
}