Merge branch 'for-2.6.25' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc

* 'for-2.6.25' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (454 commits)
  [POWERPC] Cell IOMMU fixed mapping support
  [POWERPC] Split out the ioid fetching/checking logic
  [POWERPC] Add support to cell_iommu_setup_page_tables() for multiple windows
  [POWERPC] Split out the IOMMU logic from cell_dma_dev_setup()
  [POWERPC] Split cell_iommu_setup_hardware() into two parts
  [POWERPC] Split out the logic that allocates struct iommus
  [POWERPC] Allocate the hash table under 1G on cell
  [POWERPC] Add set_dma_ops() to match get_dma_ops()
  [POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
  [POWERPC] 85xx: Only invalidate TLB0 and TLB1
  [POWERPC] 83xx: Fix typo in mpc837x compatible entries
  [POWERPC] 85xx: convert sbc85* boards to use machine_device_initcall
  [POWERPC] 83xx: rework platform Kconfig
  [POWERPC] 85xx: rework platform Kconfig
  [POWERPC] 86xx: Remove unused IRQ defines
  [POWERPC] QE: Explicitly set address-cells and size cells for muram
  [POWERPC] Convert StorCenter DTS file to /dts-v1/ format.
  [POWERPC] 86xx: Convert all 86xx DTS files to /dts-v1/ format.
  [PPC] Remove 85xx from arch/ppc
  [PPC] Remove 83xx from arch/ppc
  ...

1 files changed, 0 insertions, 166 deletions

diff --git a/arch/ppc/platforms/85xx/sbc85xx.c b/arch/ppc/platforms/85xx/sbc85xx.c
deleted file mode 100644
index 2c587ca97bce..000000000000
--- a/arch/ppc/platforms/85xx/sbc85xx.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * WindRiver PowerQUICC III SBC85xx board common routines
- *
- * Copyright 2002, 2003 Motorola Inc.
- * Copyright 2004 Red Hat, Inc.
- * 
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/serial.h>
-#include <linux/module.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/atomic.h>
-#include <asm/time.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/open_pic.h>
-#include <asm/bootinfo.h>
-#include <asm/pci-bridge.h>
-#include <asm/mpc85xx.h>
-#include <asm/irq.h>
-#include <asm/immap_85xx.h>
-#include <asm/ppc_sys.h>
-
-#include <mm/mmu_decl.h>
-
-#include <platforms/85xx/sbc85xx.h>
-
-unsigned char __res[sizeof (bd_t)];
-
-#ifndef CONFIG_PCI
-unsigned long isa_io_base = 0;
-unsigned long isa_mem_base = 0;
-unsigned long pci_dram_offset = 0;
-#endif
-
-extern unsigned long total_memory;	/* in mm/init */
-
-/* Internal interrupts are all Level Sensitive, and Positive Polarity */
-static u_char sbc8560_openpic_initsenses[] __initdata = {
-	MPC85XX_INTERNAL_IRQ_SENSES,
-	0x0,				/* External  0: */
-	0x0,				/* External  1: */
-#if defined(CONFIG_PCI)
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External 2: PCI slot 0 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External 3: PCI slot 1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External 4: PCI slot 2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External 5: PCI slot 3 */
-#else
-	0x0,				/* External  2: */
-	0x0,				/* External  3: */
-	0x0,				/* External  4: */
-	0x0,				/* External  5: */
-#endif
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External 6: PHY */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External 7: PHY */
-	0x0,				/* External  8: */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* External 9: PHY */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* External 10: PHY */
-	0x0,				/* External 11: */
-};
-
-/* ************************************************************************ */
-int
-sbc8560_show_cpuinfo(struct seq_file *m)
-{
-	uint pvid, svid, phid1;
-	uint memsize = total_memory;
-	bd_t *binfo = (bd_t *) __res;
-	unsigned int freq;
-
-	/* get the core frequency */
-	freq = binfo->bi_intfreq;
-
-	pvid = mfspr(SPRN_PVR);
-	svid = mfspr(SPRN_SVR);
-
-	seq_printf(m, "Vendor\t\t: Wind River\n");
-	seq_printf(m, "Machine\t\t: SBC%s\n", cur_ppc_sys_spec->ppc_sys_name);
-	seq_printf(m, "clock\t\t: %dMHz\n", freq / 1000000);
-	seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
-	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
-
-	/* Display cpu Pll setting */
-	phid1 = mfspr(SPRN_HID1);
-	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
-
-	/* Display the amount of memory */
-	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
-
-	return 0;
-}
-
-void __init
-sbc8560_init_IRQ(void)
-{
-	bd_t *binfo = (bd_t *) __res;
-	/* Determine the Physical Address of the OpenPIC regs */
-	phys_addr_t OpenPIC_PAddr =
-	    binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET;
-	OpenPIC_Addr = ioremap(OpenPIC_PAddr, MPC85xx_OPENPIC_SIZE);
-	OpenPIC_InitSenses = sbc8560_openpic_initsenses;
-	OpenPIC_NumInitSenses = sizeof (sbc8560_openpic_initsenses);
-
-	/* Skip reserved space and internal sources */
-	openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200);
-	/* Map PIC IRQs 0-11 */
-	openpic_set_sources(48, 12, OpenPIC_Addr + 0x10000);
-
-	/* we let openpic interrupts starting from an offset, to 
-	 * leave space for cascading interrupts underneath.
-	 */
-	openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET);
-
-	return;
-}
-
-/*
- * interrupt routing
- */
-
-#ifdef CONFIG_PCI
-int mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel,
-		    unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	    /*
-	     *      PCI IDSEL/INTPIN->INTLINE
-	     *        A      B      C      D
-	     */
-	{
-		{PIRQA, PIRQB, PIRQC, PIRQD},
-		{PIRQD, PIRQA, PIRQB, PIRQC},
-		{PIRQC, PIRQD, PIRQA, PIRQB},
-		{PIRQB, PIRQC, PIRQD, PIRQA},
-	};
-
-	const long min_idsel = 12, max_idsel = 15, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-int mpc85xx_exclude_device(u_char bus, u_char devfn)
-{
-	if (bus == 0 && PCI_SLOT(devfn) == 0)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	else
-		return PCIBIOS_SUCCESSFUL;
-}
-#endif /* CONFIG_PCI */