summaryrefslogtreecommitdiff
path: root/arch/x86/boot
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2009-06-10 15:30:41 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2009-06-10 15:30:41 -0700
commit82782ca77d1bfb32b0334cce40a25b91bd8ec016 (patch)
treed8c73212af80ed9aa314612e2b8b9e6cf74c47f7 /arch/x86/boot
parentf0d5e12bd42b7173ebbbf59279c867605f859814 (diff)
parent6799687a53a28536fd027ccb644833f66a778925 (diff)
Merge branch 'x86-kbuild-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-kbuild-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (46 commits) x86, boot: add new generated files to the appropriate .gitignore files x86, boot: correct the calculation of ZO_INIT_SIZE x86-64: align __PHYSICAL_START, remove __KERNEL_ALIGN x86, boot: correct sanity checks in boot/compressed/misc.c x86: add extension fields for bootloader type and version x86, defconfig: update kernel position parameters x86, defconfig: update to current, no material changes x86: make CONFIG_RELOCATABLE the default x86: default CONFIG_PHYSICAL_START and CONFIG_PHYSICAL_ALIGN to 16 MB x86: document new bzImage fields x86, boot: make kernel_alignment adjustable; new bzImage fields x86, boot: remove dead code from boot/compressed/head_*.S x86, boot: use LOAD_PHYSICAL_ADDR on 64 bits x86, boot: make symbols from the main vmlinux available x86, boot: determine compressed code offset at compile time x86, boot: use appropriate rep string for move and clear x86, boot: zero EFLAGS on 32 bits x86, boot: set up the decompression stack as early as possible x86, boot: straighten out ranges to copy/zero in compressed/head*.S x86, boot: stylistic cleanups for boot/compressed/head_64.S ... Fixed trivial conflict in arch/x86/configs/x86_64_defconfig manually
Diffstat (limited to 'arch/x86/boot')
-rw-r--r--arch/x86/boot/.gitignore2
-rw-r--r--arch/x86/boot/Makefile24
-rw-r--r--arch/x86/boot/compressed/.gitignore3
-rw-r--r--arch/x86/boot/compressed/Makefile54
-rw-r--r--arch/x86/boot/compressed/head_32.S194
-rw-r--r--arch/x86/boot/compressed/head_64.S169
-rw-r--r--arch/x86/boot/compressed/misc.c12
-rw-r--r--arch/x86/boot/compressed/mkpiggy.c97
-rw-r--r--arch/x86/boot/compressed/vmlinux.lds.S (renamed from arch/x86/boot/compressed/vmlinux_64.lds)29
-rw-r--r--arch/x86/boot/compressed/vmlinux.scr10
-rw-r--r--arch/x86/boot/compressed/vmlinux_32.lds43
-rw-r--r--arch/x86/boot/header.S28
12 files changed, 364 insertions, 301 deletions
diff --git a/arch/x86/boot/.gitignore b/arch/x86/boot/.gitignore
index 172cf8a98bdd..851fe936d242 100644
--- a/arch/x86/boot/.gitignore
+++ b/arch/x86/boot/.gitignore
@@ -3,6 +3,8 @@ bzImage
cpustr.h
mkcpustr
offsets.h
+voffset.h
+zoffset.h
setup
setup.bin
setup.elf
diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
index 6633b6e7505a..619d297aa2ba 100644
--- a/arch/x86/boot/Makefile
+++ b/arch/x86/boot/Makefile
@@ -86,19 +86,27 @@ $(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE
SETUP_OBJS = $(addprefix $(obj)/,$(setup-y))
-sed-offsets := -e 's/^00*/0/' \
- -e 's/^\([0-9a-fA-F]*\) . \(input_data\|input_data_end\)$$/\#define \2 0x\1/p'
+sed-voffset := -e 's/^\([0-9a-fA-F]*\) . \(_text\|_end\)$$/\#define VO_\2 0x\1/p'
-quiet_cmd_offsets = OFFSETS $@
- cmd_offsets = $(NM) $< | sed -n $(sed-offsets) > $@
+quiet_cmd_voffset = VOFFSET $@
+ cmd_voffset = $(NM) $< | sed -n $(sed-voffset) > $@
-$(obj)/offsets.h: $(obj)/compressed/vmlinux FORCE
- $(call if_changed,offsets)
+targets += voffset.h
+$(obj)/voffset.h: vmlinux FORCE
+ $(call if_changed,voffset)
+
+sed-zoffset := -e 's/^\([0-9a-fA-F]*\) . \(startup_32\|input_data\|_end\|z_.*\)$$/\#define ZO_\2 0x\1/p'
+
+quiet_cmd_zoffset = ZOFFSET $@
+ cmd_zoffset = $(NM) $< | sed -n $(sed-zoffset) > $@
+
+targets += zoffset.h
+$(obj)/zoffset.h: $(obj)/compressed/vmlinux FORCE
+ $(call if_changed,zoffset)
-targets += offsets.h
AFLAGS_header.o += -I$(obj)
-$(obj)/header.o: $(obj)/offsets.h
+$(obj)/header.o: $(obj)/voffset.h $(obj)/zoffset.h
LDFLAGS_setup.elf := -T
$(obj)/setup.elf: $(src)/setup.ld $(SETUP_OBJS) FORCE
diff --git a/arch/x86/boot/compressed/.gitignore b/arch/x86/boot/compressed/.gitignore
index 63eff3b04d01..4a46fab7162e 100644
--- a/arch/x86/boot/compressed/.gitignore
+++ b/arch/x86/boot/compressed/.gitignore
@@ -1,3 +1,6 @@
relocs
vmlinux.bin.all
vmlinux.relocs
+vmlinux.lds
+mkpiggy
+piggy.S
diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index 65551c9f8571..49c8a4c37d7c 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -19,7 +19,9 @@ KBUILD_AFLAGS := $(KBUILD_CFLAGS) -D__ASSEMBLY__
LDFLAGS := -m elf_$(UTS_MACHINE)
LDFLAGS_vmlinux := -T
-$(obj)/vmlinux: $(src)/vmlinux_$(BITS).lds $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/piggy.o FORCE
+hostprogs-y := mkpiggy
+
+$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/piggy.o FORCE
$(call if_changed,ld)
@:
@@ -29,7 +31,7 @@ $(obj)/vmlinux.bin: vmlinux FORCE
targets += vmlinux.bin.all vmlinux.relocs relocs
-hostprogs-$(CONFIG_X86_32) += relocs
+hostprogs-$(CONFIG_X86_NEED_RELOCS) += relocs
quiet_cmd_relocs = RELOCS $@
cmd_relocs = $(obj)/relocs $< > $@;$(obj)/relocs --abs-relocs $<
@@ -37,46 +39,22 @@ $(obj)/vmlinux.relocs: vmlinux $(obj)/relocs FORCE
$(call if_changed,relocs)
vmlinux.bin.all-y := $(obj)/vmlinux.bin
-vmlinux.bin.all-$(CONFIG_RELOCATABLE) += $(obj)/vmlinux.relocs
-quiet_cmd_relocbin = BUILD $@
- cmd_relocbin = cat $(filter-out FORCE,$^) > $@
-$(obj)/vmlinux.bin.all: $(vmlinux.bin.all-y) FORCE
- $(call if_changed,relocbin)
-
-ifeq ($(CONFIG_X86_32),y)
+vmlinux.bin.all-$(CONFIG_X86_NEED_RELOCS) += $(obj)/vmlinux.relocs
-ifdef CONFIG_RELOCATABLE
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin.all FORCE
- $(call if_changed,gzip)
-$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin.all FORCE
- $(call if_changed,bzip2)
-$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin.all FORCE
- $(call if_changed,lzma)
-else
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
+$(obj)/vmlinux.bin.gz: $(vmlinux.bin.all-y) FORCE
$(call if_changed,gzip)
-$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
+$(obj)/vmlinux.bin.bz2: $(vmlinux.bin.all-y) FORCE
$(call if_changed,bzip2)
-$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
+$(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y) FORCE
$(call if_changed,lzma)
-endif
-LDFLAGS_piggy.o := -r --format binary --oformat elf32-i386 -T
-else
+suffix-$(CONFIG_KERNEL_GZIP) := gz
+suffix-$(CONFIG_KERNEL_BZIP2) := bz2
+suffix-$(CONFIG_KERNEL_LZMA) := lzma
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
- $(call if_changed,gzip)
-$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
- $(call if_changed,bzip2)
-$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
- $(call if_changed,lzma)
-
-LDFLAGS_piggy.o := -r --format binary --oformat elf64-x86-64 -T
-endif
+quiet_cmd_mkpiggy = MKPIGGY $@
+ cmd_mkpiggy = $(obj)/mkpiggy $< > $@ || ( rm -f $@ ; false )
-suffix_$(CONFIG_KERNEL_GZIP) = gz
-suffix_$(CONFIG_KERNEL_BZIP2) = bz2
-suffix_$(CONFIG_KERNEL_LZMA) = lzma
-
-$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix_y) FORCE
- $(call if_changed,ld)
+targets += piggy.S
+$(obj)/piggy.S: $(obj)/vmlinux.bin.$(suffix-y) $(obj)/mkpiggy FORCE
+ $(call if_changed,mkpiggy)
diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S
index 3a8a866fb2e2..75e4f001e706 100644
--- a/arch/x86/boot/compressed/head_32.S
+++ b/arch/x86/boot/compressed/head_32.S
@@ -12,16 +12,16 @@
* the page directory. [According to comments etc elsewhere on a compressed
* kernel it will end up at 0x1000 + 1Mb I hope so as I assume this. - AC]
*
- * Page 0 is deliberately kept safe, since System Management Mode code in
+ * Page 0 is deliberately kept safe, since System Management Mode code in
* laptops may need to access the BIOS data stored there. This is also
- * useful for future device drivers that either access the BIOS via VM86
+ * useful for future device drivers that either access the BIOS via VM86
* mode.
*/
/*
* High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
*/
-.text
+ .text
#include <linux/linkage.h>
#include <asm/segment.h>
@@ -29,161 +29,151 @@
#include <asm/boot.h>
#include <asm/asm-offsets.h>
-.section ".text.head","ax",@progbits
+ .section ".text.head","ax",@progbits
ENTRY(startup_32)
cld
- /* test KEEP_SEGMENTS flag to see if the bootloader is asking
- * us to not reload segments */
- testb $(1<<6), BP_loadflags(%esi)
- jnz 1f
+ /*
+ * Test KEEP_SEGMENTS flag to see if the bootloader is asking
+ * us to not reload segments
+ */
+ testb $(1<<6), BP_loadflags(%esi)
+ jnz 1f
cli
- movl $(__BOOT_DS),%eax
- movl %eax,%ds
- movl %eax,%es
- movl %eax,%fs
- movl %eax,%gs
- movl %eax,%ss
+ movl $__BOOT_DS, %eax
+ movl %eax, %ds
+ movl %eax, %es
+ movl %eax, %fs
+ movl %eax, %gs
+ movl %eax, %ss
1:
-/* Calculate the delta between where we were compiled to run
+/*
+ * Calculate the delta between where we were compiled to run
* at and where we were actually loaded at. This can only be done
* with a short local call on x86. Nothing else will tell us what
* address we are running at. The reserved chunk of the real-mode
* data at 0x1e4 (defined as a scratch field) are used as the stack
* for this calculation. Only 4 bytes are needed.
*/
- leal (0x1e4+4)(%esi), %esp
- call 1f
-1: popl %ebp
- subl $1b, %ebp
+ leal (BP_scratch+4)(%esi), %esp
+ call 1f
+1: popl %ebp
+ subl $1b, %ebp
-/* %ebp contains the address we are loaded at by the boot loader and %ebx
+/*
+ * %ebp contains the address we are loaded at by the boot loader and %ebx
* contains the address where we should move the kernel image temporarily
* for safe in-place decompression.
*/
#ifdef CONFIG_RELOCATABLE
- movl %ebp, %ebx
- addl $(CONFIG_PHYSICAL_ALIGN - 1), %ebx
- andl $(~(CONFIG_PHYSICAL_ALIGN - 1)), %ebx
+ movl %ebp, %ebx
+ movl BP_kernel_alignment(%esi), %eax
+ decl %eax
+ addl %eax, %ebx
+ notl %eax
+ andl %eax, %ebx
#else
- movl $LOAD_PHYSICAL_ADDR, %ebx
+ movl $LOAD_PHYSICAL_ADDR, %ebx
#endif
- /* Replace the compressed data size with the uncompressed size */
- subl input_len(%ebp), %ebx
- movl output_len(%ebp), %eax
- addl %eax, %ebx
- /* Add 8 bytes for every 32K input block */
- shrl $12, %eax
- addl %eax, %ebx
- /* Add 32K + 18 bytes of extra slack */
- addl $(32768 + 18), %ebx
- /* Align on a 4K boundary */
- addl $4095, %ebx
- andl $~4095, %ebx
-
-/* Copy the compressed kernel to the end of our buffer
+ /* Target address to relocate to for decompression */
+ addl $z_extract_offset, %ebx
+
+ /* Set up the stack */
+ leal boot_stack_end(%ebx), %esp
+
+ /* Zero EFLAGS */
+ pushl $0
+ popfl
+
+/*
+ * Copy the compressed kernel to the end of our buffer
* where decompression in place becomes safe.
*/
- pushl %esi
- leal _end(%ebp), %esi
- leal _end(%ebx), %edi
- movl $(_end - startup_32), %ecx
+ pushl %esi
+ leal (_bss-4)(%ebp), %esi
+ leal (_bss-4)(%ebx), %edi
+ movl $(_bss - startup_32), %ecx
+ shrl $2, %ecx
std
- rep
- movsb
+ rep movsl
cld
- popl %esi
-
-/* Compute the kernel start address.
- */
-#ifdef CONFIG_RELOCATABLE
- addl $(CONFIG_PHYSICAL_ALIGN - 1), %ebp
- andl $(~(CONFIG_PHYSICAL_ALIGN - 1)), %ebp
-#else
- movl $LOAD_PHYSICAL_ADDR, %ebp
-#endif
+ popl %esi
/*
* Jump to the relocated address.
*/
- leal relocated(%ebx), %eax
- jmp *%eax
+ leal relocated(%ebx), %eax
+ jmp *%eax
ENDPROC(startup_32)
-.section ".text"
+ .text
relocated:
/*
- * Clear BSS
- */
- xorl %eax,%eax
- leal _edata(%ebx),%edi
- leal _end(%ebx), %ecx
- subl %edi,%ecx
- cld
- rep
- stosb
-
-/*
- * Setup the stack for the decompressor
+ * Clear BSS (stack is currently empty)
*/
- leal boot_stack_end(%ebx), %esp
+ xorl %eax, %eax
+ leal _bss(%ebx), %edi
+ leal _ebss(%ebx), %ecx
+ subl %edi, %ecx
+ shrl $2, %ecx
+ rep stosl
/*
* Do the decompression, and jump to the new kernel..
*/
- movl output_len(%ebx), %eax
- pushl %eax
- # push arguments for decompress_kernel:
- pushl %ebp # output address
- movl input_len(%ebx), %eax
- pushl %eax # input_len
- leal input_data(%ebx), %eax
- pushl %eax # input_data
- leal boot_heap(%ebx), %eax
- pushl %eax # heap area
- pushl %esi # real mode pointer
- call decompress_kernel
- addl $20, %esp
- popl %ecx
+ leal z_extract_offset_negative(%ebx), %ebp
+ /* push arguments for decompress_kernel: */
+ pushl %ebp /* output address */
+ pushl $z_input_len /* input_len */
+ leal input_data(%ebx), %eax
+ pushl %eax /* input_data */
+ leal boot_heap(%ebx), %eax
+ pushl %eax /* heap area */
+ pushl %esi /* real mode pointer */
+ call decompress_kernel
+ addl $20, %esp
#if CONFIG_RELOCATABLE
-/* Find the address of the relocations.
+/*
+ * Find the address of the relocations.
*/
- movl %ebp, %edi
- addl %ecx, %edi
+ leal z_output_len(%ebp), %edi
-/* Calculate the delta between where vmlinux was compiled to run
+/*
+ * Calculate the delta between where vmlinux was compiled to run
* and where it was actually loaded.
*/
- movl %ebp, %ebx
- subl $LOAD_PHYSICAL_ADDR, %ebx
- jz 2f /* Nothing to be done if loaded at compiled addr. */
+ movl %ebp, %ebx
+ subl $LOAD_PHYSICAL_ADDR, %ebx
+ jz 2f /* Nothing to be done if loaded at compiled addr. */
/*
* Process relocations.
*/
-1: subl $4, %edi
- movl 0(%edi), %ecx
- testl %ecx, %ecx
- jz 2f
- addl %ebx, -__PAGE_OFFSET(%ebx, %ecx)
- jmp 1b
+1: subl $4, %edi
+ movl (%edi), %ecx
+ testl %ecx, %ecx
+ jz 2f
+ addl %ebx, -__PAGE_OFFSET(%ebx, %ecx)
+ jmp 1b
2:
#endif
/*
* Jump to the decompressed kernel.
*/
- xorl %ebx,%ebx
- jmp *%ebp
+ xorl %ebx, %ebx
+ jmp *%ebp
-.bss
-/* Stack and heap for uncompression */
-.balign 4
+/*
+ * Stack and heap for uncompression
+ */
+ .bss
+ .balign 4
boot_heap:
.fill BOOT_HEAP_SIZE, 1, 0
boot_stack:
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index ed4a82948002..f62c284db9eb 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -21,8 +21,8 @@
/*
* High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
*/
-.code32
-.text
+ .code32
+ .text
#include <linux/linkage.h>
#include <asm/segment.h>
@@ -33,12 +33,14 @@
#include <asm/processor-flags.h>
#include <asm/asm-offsets.h>
-.section ".text.head"
+ .section ".text.head"
.code32
ENTRY(startup_32)
cld
- /* test KEEP_SEGMENTS flag to see if the bootloader is asking
- * us to not reload segments */
+ /*
+ * Test KEEP_SEGMENTS flag to see if the bootloader is asking
+ * us to not reload segments
+ */
testb $(1<<6), BP_loadflags(%esi)
jnz 1f
@@ -49,14 +51,15 @@ ENTRY(startup_32)
movl %eax, %ss
1:
-/* Calculate the delta between where we were compiled to run
+/*
+ * Calculate the delta between where we were compiled to run
* at and where we were actually loaded at. This can only be done
* with a short local call on x86. Nothing else will tell us what
* address we are running at. The reserved chunk of the real-mode
* data at 0x1e4 (defined as a scratch field) are used as the stack
* for this calculation. Only 4 bytes are needed.
*/
- leal (0x1e4+4)(%esi), %esp
+ leal (BP_scratch+4)(%esi), %esp
call 1f
1: popl %ebp
subl $1b, %ebp
@@ -70,32 +73,28 @@ ENTRY(startup_32)
testl %eax, %eax
jnz no_longmode
-/* Compute the delta between where we were compiled to run at
+/*
+ * Compute the delta between where we were compiled to run at
* and where the code will actually run at.
- */
-/* %ebp contains the address we are loaded at by the boot loader and %ebx
+ *
+ * %ebp contains the address we are loaded at by the boot loader and %ebx
* contains the address where we should move the kernel image temporarily
* for safe in-place decompression.
*/
#ifdef CONFIG_RELOCATABLE
movl %ebp, %ebx
- addl $(PMD_PAGE_SIZE -1), %ebx
- andl $PMD_PAGE_MASK, %ebx
+ movl BP_kernel_alignment(%esi), %eax
+ decl %eax
+ addl %eax, %ebx
+ notl %eax
+ andl %eax, %ebx
#else
- movl $CONFIG_PHYSICAL_START, %ebx
+ movl $LOAD_PHYSICAL_ADDR, %ebx
#endif
- /* Replace the compressed data size with the uncompressed size */
- subl input_len(%ebp), %ebx
- movl output_len(%ebp), %eax
- addl %eax, %ebx
- /* Add 8 bytes for every 32K input block */
- shrl $12, %eax
- addl %eax, %ebx
- /* Add 32K + 18 bytes of extra slack and align on a 4K boundary */
- addl $(32768 + 18 + 4095), %ebx
- andl $~4095, %ebx
+ /* Target address to relocate to for decompression */
+ addl $z_extract_offset, %ebx
/*
* Prepare for entering 64 bit mode
@@ -114,7 +113,7 @@ ENTRY(startup_32)
/*
* Build early 4G boot pagetable
*/
- /* Initialize Page tables to 0*/
+ /* Initialize Page tables to 0 */
leal pgtable(%ebx), %edi
xorl %eax, %eax
movl $((4096*6)/4), %ecx
@@ -155,7 +154,8 @@ ENTRY(startup_32)
btsl $_EFER_LME, %eax
wrmsr
- /* Setup for the jump to 64bit mode
+ /*
+ * Setup for the jump to 64bit mode
*
* When the jump is performend we will be in long mode but
* in 32bit compatibility mode with EFER.LME = 1, CS.L = 0, CS.D = 1
@@ -184,7 +184,8 @@ no_longmode:
#include "../../kernel/verify_cpu_64.S"
- /* Be careful here startup_64 needs to be at a predictable
+ /*
+ * Be careful here startup_64 needs to be at a predictable
* address so I can export it in an ELF header. Bootloaders
* should look at the ELF header to find this address, as
* it may change in the future.
@@ -192,7 +193,8 @@ no_longmode:
.code64
.org 0x200
ENTRY(startup_64)
- /* We come here either from startup_32 or directly from a
+ /*
+ * We come here either from startup_32 or directly from a
* 64bit bootloader. If we come here from a bootloader we depend on
* an identity mapped page table being provied that maps our
* entire text+data+bss and hopefully all of memory.
@@ -209,50 +211,54 @@ ENTRY(startup_64)
movl $0x20, %eax
ltr %ax
- /* Compute the decompressed kernel start address. It is where
+ /*
+ * Compute the decompressed kernel start address. It is where
* we were loaded at aligned to a 2M boundary. %rbp contains the
* decompressed kernel start address.
*
* If it is a relocatable kernel then decompress and run the kernel
* from load address aligned to 2MB addr, otherwise decompress and
- * run the kernel from CONFIG_PHYSICAL_START
+ * run the kernel from LOAD_PHYSICAL_ADDR
+ *
+ * We cannot rely on the calculation done in 32-bit mode, since we
+ * may have been invoked via the 64-bit entry point.
*/
/* Start with the delta to where the kernel will run at. */
#ifdef CONFIG_RELOCATABLE
leaq startup_32(%rip) /* - $startup_32 */, %rbp
- addq $(PMD_PAGE_SIZE - 1), %rbp
- andq $PMD_PAGE_MASK, %rbp
- movq %rbp, %rbx
+ movl BP_kernel_alignment(%rsi), %eax
+ decl %eax
+ addq %rax, %rbp
+ notq %rax
+ andq %rax, %rbp
#else
- movq $CONFIG_PHYSICAL_START, %rbp
- movq %rbp, %rbx
+ movq $LOAD_PHYSICAL_ADDR, %rbp
#endif
- /* Replace the compressed data size with the uncompressed size */
- movl input_len(%rip), %eax
- subq %rax, %rbx
- movl output_len(%rip), %eax
- addq %rax, %rbx
- /* Add 8 bytes for every 32K input block */
- shrq $12, %rax
- addq %rax, %rbx
- /* Add 32K + 18 bytes of extra slack and align on a 4K boundary */
- addq $(32768 + 18 + 4095), %rbx
- andq $~4095, %rbx
-
-/* Copy the compressed kernel to the end of our buffer
+ /* Target address to relocate to for decompression */
+ leaq z_extract_offset(%rbp), %rbx
+
+ /* Set up the stack */
+ leaq boot_stack_end(%rbx), %rsp
+
+ /* Zero EFLAGS */
+ pushq $0
+ popfq
+
+/*
+ * Copy the compressed kernel to the end of our buffer
* where decompression in place becomes safe.
*/
- leaq _end_before_pgt(%rip), %r8
- leaq _end_before_pgt(%rbx), %r9
- movq $_end_before_pgt /* - $startup_32 */, %rcx
-1: subq $8, %r8
- subq $8, %r9
- movq 0(%r8), %rax
- movq %rax, 0(%r9)
- subq $8, %rcx
- jnz 1b
+ pushq %rsi
+ leaq (_bss-8)(%rip), %rsi
+ leaq (_bss-8)(%rbx), %rdi
+ movq $_bss /* - $startup_32 */, %rcx
+ shrq $3, %rcx
+ std
+ rep movsq
+ cld
+ popq %rsi
/*
* Jump to the relocated address.
@@ -260,37 +266,28 @@ ENTRY(startup_64)
leaq relocated(%rbx), %rax
jmp *%rax
-.section ".text"
+ .text
relocated:
/*
- * Clear BSS
+ * Clear BSS (stack is currently empty)
*/
- xorq %rax, %rax
- leaq _edata(%rbx), %rdi
- leaq _end_before_pgt(%rbx), %rcx
+ xorl %eax, %eax
+ leaq _bss(%rip), %rdi
+ leaq _ebss(%rip), %rcx
subq %rdi, %rcx
- cld
- rep
- stosb
-
- /* Setup the stack */
- leaq boot_stack_end(%rip), %rsp
-
- /* zero EFLAGS after setting rsp */
- pushq $0
- popfq
+ shrq $3, %rcx
+ rep stosq
/*
* Do the decompression, and jump to the new kernel..
*/
- pushq %rsi # Save the real mode argument
- movq %rsi, %rdi # real mode address
- leaq boot_heap(%rip), %rsi # malloc area for uncompression
- leaq input_data(%rip), %rdx # input_data
- movl input_len(%rip), %eax
- movq %rax, %rcx # input_len
- movq %rbp, %r8 # output
+ pushq %rsi /* Save the real mode argument */
+ movq %rsi, %rdi /* real mode address */
+ leaq boot_heap(%rip), %rsi /* malloc area for uncompression */
+ leaq input_data(%rip), %rdx /* input_data */
+ movl $z_input_len, %ecx /* input_len */
+ movq %rbp, %r8 /* output target address */
call decompress_kernel
popq %rsi
@@ -311,11 +308,21 @@ gdt:
.quad 0x0000000000000000 /* TS continued */
gdt_end:
-.bss
-/* Stack and heap for uncompression */
-.balign 4
+/*
+ * Stack and heap for uncompression
+ */
+ .bss
+ .balign 4
boot_heap:
.fill BOOT_HEAP_SIZE, 1, 0
boot_stack:
.fill BOOT_STACK_SIZE, 1, 0
boot_stack_end:
+
+/*
+ * Space for page tables (not in .bss so not zeroed)
+ */
+ .section ".pgtable","a",@nobits
+ .balign 4096
+pgtable:
+ .fill 6*4096, 1, 0
diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c
index e45be73684ff..842b2a36174a 100644
--- a/arch/x86/boot/compressed/misc.c
+++ b/arch/x86/boot/compressed/misc.c
@@ -325,21 +325,19 @@ asmlinkage void decompress_kernel(void *rmode, memptr heap,
free_mem_ptr = heap; /* Heap */
free_mem_end_ptr = heap + BOOT_HEAP_SIZE;
+ if ((unsigned long)output & (MIN_KERNEL_ALIGN - 1))
+ error("Destination address inappropriately aligned");
#ifdef CONFIG_X86_64
- if ((unsigned long)output & (__KERNEL_ALIGN - 1))
- error("Destination address not 2M aligned");
- if ((unsigned long)output >= 0xffffffffffUL)
+ if (heap > 0x3fffffffffffUL)
error("Destination address too large");
#else
- if ((u32)output & (CONFIG_PHYSICAL_ALIGN - 1))
- error("Destination address not CONFIG_PHYSICAL_ALIGN aligned");
if (heap > ((-__PAGE_OFFSET-(512<<20)-1) & 0x7fffffff))
error("Destination address too large");
+#endif
#ifndef CONFIG_RELOCATABLE
- if ((u32)output != LOAD_PHYSICAL_ADDR)
+ if ((unsigned long)output != LOAD_PHYSICAL_ADDR)
error("Wrong destination address");
#endif
-#endif
if (!quiet)
putstr("\nDecompressing Linux... ");
diff --git a/arch/x86/boot/compressed/mkpiggy.c b/arch/x86/boot/compressed/mkpiggy.c
new file mode 100644
index 000000000000..bcbd36c41432
--- /dev/null
+++ b/arch/x86/boot/compressed/mkpiggy.c
@@ -0,0 +1,97 @@
+/* ----------------------------------------------------------------------- *
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ * H. Peter Anvin <hpa@linux.intel.com>
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * Compute the desired load offset from a compressed program; outputs
+ * a small assembly wrapper with the appropriate symbols defined.
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <inttypes.h>
+
+static uint32_t getle32(const void *p)
+{
+ const uint8_t *cp = p;
+
+ return (uint32_t)cp[0] + ((uint32_t)cp[1] << 8) +
+ ((uint32_t)cp[2] << 16) + ((uint32_t)cp[3] << 24);
+}
+
+int main(int argc, char *argv[])
+{
+ uint32_t olen;
+ long ilen;
+ unsigned long offs;
+ FILE *f;
+
+ if (argc < 2) {
+ fprintf(stderr, "Usage: %s compressed_file\n", argv[0]);
+ return 1;
+ }
+
+ /* Get the information for the compressed kernel image first */
+
+ f = fopen(argv[1], "r");
+ if (!f) {
+ perror(argv[1]);
+ return 1;
+ }
+
+
+ if (fseek(f, -4L, SEEK_END)) {
+ perror(argv[1]);
+ }
+ fread(&olen, sizeof olen, 1, f);
+ ilen = ftell(f);
+ olen = getle32(&olen);
+ fclose(f);
+
+ /*
+ * Now we have the input (compressed) and output (uncompressed)
+ * sizes, compute the necessary decompression offset...
+ */
+
+ offs = (olen > ilen) ? olen - ilen : 0;
+ offs += olen >> 12; /* Add 8 bytes for each 32K block */
+ offs += 32*1024 + 18; /* Add 32K + 18 bytes slack */
+ offs = (offs+4095) & ~4095; /* Round to a 4K boundary */
+
+ printf(".section \".rodata.compressed\",\"a\",@progbits\n");
+ printf(".globl z_input_len\n");
+ printf("z_input_len = %lu\n", ilen);
+ printf(".globl z_output_len\n");
+ printf("z_output_len = %lu\n", (unsigned long)olen);
+ printf(".globl z_extract_offset\n");
+ printf("z_extract_offset = 0x%lx\n", offs);
+ /* z_extract_offset_negative allows simplification of head_32.S */
+ printf(".globl z_extract_offset_negative\n");
+ printf("z_extract_offset_negative = -0x%lx\n", offs);
+
+ printf(".globl input_data, input_data_end\n");
+ printf("input_data:\n");
+ printf(".incbin \"%s\"\n", argv[1]);
+ printf("input_data_end:\n");
+
+ return 0;
+}
diff --git a/arch/x86/boot/compressed/vmlinux_64.lds b/arch/x86/boot/compressed/vmlinux.lds.S
index bef1ac891bce..cc353e1b3ffd 100644
--- a/arch/x86/boot/compressed/vmlinux_64.lds
+++ b/arch/x86/boot/compressed/vmlinux.lds.S
@@ -1,6 +1,17 @@
-OUTPUT_FORMAT("elf64-x86-64", "elf64-x86-64", "elf64-x86-64")
+OUTPUT_FORMAT(CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT)
+
+#undef i386
+
+#include <asm/page_types.h>
+
+#ifdef CONFIG_X86_64
OUTPUT_ARCH(i386:x86-64)
ENTRY(startup_64)
+#else
+OUTPUT_ARCH(i386)
+ENTRY(startup_32)
+#endif
+
SECTIONS
{
/* Be careful parts of head_64.S assume startup_32 is at
@@ -33,16 +44,22 @@ SECTIONS
*(.data.*)
_edata = . ;
}
+ . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
.bss : {
_bss = . ;
*(.bss)
*(.bss.*)
*(COMMON)
- . = ALIGN(8);
- _end_before_pgt = . ;
- . = ALIGN(4096);
- pgtable = . ;
- . = . + 4096 * 6;
+ . = ALIGN(8); /* For convenience during zeroing */
_ebss = .;
}
+#ifdef CONFIG_X86_64
+ . = ALIGN(PAGE_SIZE);
+ .pgtable : {
+ _pgtable = . ;
+ *(.pgtable)
+ _epgtable = . ;
+ }
+#endif
+ _end = .;
}
diff --git a/arch/x86/boot/compressed/vmlinux.scr b/arch/x86/boot/compressed/vmlinux.scr
deleted file mode 100644
index f02382ae5c48..000000000000
--- a/arch/x86/boot/compressed/vmlinux.scr
+++ /dev/null
@@ -1,10 +0,0 @@
-SECTIONS
-{
- .rodata.compressed : {
- input_len = .;
- LONG(input_data_end - input_data) input_data = .;
- *(.data)
- output_len = . - 4;
- input_data_end = .;
- }
-}
diff --git a/arch/x86/boot/compressed/vmlinux_32.lds b/arch/x86/boot/compressed/vmlinux_32.lds
deleted file mode 100644
index bb3c48379c40..000000000000
--- a/arch/x86/boot/compressed/vmlinux_32.lds
+++ /dev/null
@@ -1,43 +0,0 @@
-OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386")
-OUTPUT_ARCH(i386)
-ENTRY(startup_32)
-SECTIONS
-{
- /* Be careful parts of head_32.S assume startup_32 is at
- * address 0.
- */
- . = 0;
- .text.head : {
- _head = . ;
- *(.text.head)
- _ehead = . ;
- }
- .rodata.compressed : {
- *(.rodata.compressed)
- }
- .text : {
- _text = .; /* Text */
- *(.text)
- *(.text.*)
- _etext = . ;
- }
- .rodata : {
- _rodata = . ;
- *(.rodata) /* read-only data */
- *(.rodata.*)
- _erodata = . ;
- }
- .data : {
- _data = . ;
- *(.data)
- *(.data.*)
- _edata = . ;
- }
- .bss : {
- _bss = . ;
- *(.bss)
- *(.bss.*)
- *(COMMON)
- _end = . ;
- }
-}
diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S
index 5d84d1c74e4c..1040f6e8010c 100644
--- a/arch/x86/boot/header.S
+++ b/arch/x86/boot/header.S
@@ -22,7 +22,8 @@
#include <asm/page_types.h>
#include <asm/setup.h>
#include "boot.h"
-#include "offsets.h"
+#include "voffset.h"
+#include "zoffset.h"
BOOTSEG = 0x07C0 /* original address of boot-sector */
SYSSEG = 0x1000 /* historical load address >> 4 */
@@ -115,7 +116,7 @@ _start:
# Part 2 of the header, from the old setup.S
.ascii "HdrS" # header signature
- .word 0x0209 # header version number (>= 0x0105)
+ .word 0x020a # header version number (>= 0x0105)
# or else old loadlin-1.5 will fail)
.globl realmode_swtch
realmode_swtch: .word 0, 0 # default_switch, SETUPSEG
@@ -168,7 +169,11 @@ heap_end_ptr: .word _end+STACK_SIZE-512
# end of setup code can be used by setup
# for local heap purposes.
-pad1: .word 0
+ext_loader_ver:
+ .byte 0 # Extended boot loader version
+ext_loader_type:
+ .byte 0 # Extended boot loader type
+
cmd_line_ptr: .long 0 # (Header version 0x0202 or later)
# If nonzero, a 32-bit pointer
# to the kernel command line.
@@ -200,7 +205,7 @@ relocatable_kernel: .byte 1
#else
relocatable_kernel: .byte 0
#endif
-pad2: .byte 0
+min_alignment: .byte MIN_KERNEL_ALIGN_LG2 # minimum alignment
pad3: .word 0
cmdline_size: .long COMMAND_LINE_SIZE-1 #length of the command line,
@@ -212,13 +217,24 @@ hardware_subarch: .long 0 # subarchitecture, added with 2.07
hardware_subarch_data: .quad 0
-payload_offset: .long input_data
-payload_length: .long input_data_end-input_data
+payload_offset: .long ZO_input_data
+payload_length: .long ZO_z_input_len
setup_data: .quad 0 # 64-bit physical pointer to
# single linked list of
# struct setup_data
+pref_address: .quad LOAD_PHYSICAL_ADDR # preferred load addr
+
+#define ZO_INIT_SIZE (ZO__end - ZO_startup_32 + ZO_z_extract_offset)
+#define VO_INIT_SIZE (VO__end - VO__text)
+#if ZO_INIT_SIZE > VO_INIT_SIZE
+#define INIT_SIZE ZO_INIT_SIZE
+#else
+#define INIT_SIZE VO_INIT_SIZE
+#endif
+init_size: .long INIT_SIZE # kernel initialization size
+
# End of setup header #####################################################
.section ".inittext", "ax"