Merge tag 'libnvdimm-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm updates from Dan Williams:

 - Replace pcommit with ADR / directed-flushing.

   The pcommit instruction, which has not shipped on any product, is
   deprecated.  Instead, the requirement is that platforms implement
   either ADR, or provide one or more flush addresses per nvdimm.

   ADR (Asynchronous DRAM Refresh) flushes data in posted write buffers
   to the memory controller on a power-fail event.

   Flush addresses are defined in ACPI 6.x as an NVDIMM Firmware
   Interface Table (NFIT) sub-structure: "Flush Hint Address Structure".
   A flush hint is an mmio address that when written and fenced assures
   that all previous posted writes targeting a given dimm have been
   flushed to media.

 - On-demand ARS (address range scrub).

   Linux uses the results of the ACPI ARS commands to track bad blocks
   in pmem devices.  When latent errors are detected we re-scrub the
   media to refresh the bad block list, userspace can also request a
   re-scrub at any time.

 - Support for the Microsoft DSM (device specific method) command
   format.

 - Support for EDK2/OVMF virtual disk device memory ranges.

 - Various fixes and cleanups across the subsystem.

* tag 'libnvdimm-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (41 commits)
  libnvdimm-btt: Delete an unnecessary check before the function call "__nd_device_register"
  nfit: do an ARS scrub on hitting a latent media error
  nfit: move to nfit/ sub-directory
  nfit, libnvdimm: allow an ARS scrub to be triggered on demand
  libnvdimm: register nvdimm_bus devices with an nd_bus driver
  pmem: clarify a debug print in pmem_clear_poison
  x86/insn: remove pcommit
  Revert "KVM: x86: add pcommit support"
  nfit, tools/testing/nvdimm/: unify shutdown paths
  libnvdimm: move ->module to struct nvdimm_bus_descriptor
  nfit: cleanup acpi_nfit_init calling convention
  nfit: fix _FIT evaluation memory leak + use after free
  tools/testing/nvdimm: add manufacturing_{date|location} dimm properties
  tools/testing/nvdimm: add virtual ramdisk range
  acpi, nfit: treat virtual ramdisk SPA as pmem region
  pmem: kill __pmem address space
  pmem: kill wmb_pmem()
  libnvdimm, pmem: use nvdimm_flush() for namespace I/O writes
  fs/dax: remove wmb_pmem()
  libnvdimm, pmem: flush posted-write queues on shutdown
  ...

1 files changed, 4 insertions, 28 deletions

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 7758680db20b..df07a0a4611f 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -2707,8 +2707,7 @@ static void nested_vmx_setup_ctls_msrs(struct vcpu_vmx *vmx)
 		SECONDARY_EXEC_APIC_REGISTER_VIRT |
 		SECONDARY_EXEC_VIRTUAL_INTR_DELIVERY |
 		SECONDARY_EXEC_WBINVD_EXITING |
-		SECONDARY_EXEC_XSAVES |
-		SECONDARY_EXEC_PCOMMIT;
+		SECONDARY_EXEC_XSAVES;
 
 	if (enable_ept) {
 		/* nested EPT: emulate EPT also to L1 */
@@ -3270,7 +3269,6 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf)
 			SECONDARY_EXEC_SHADOW_VMCS |
 			SECONDARY_EXEC_XSAVES |
 			SECONDARY_EXEC_ENABLE_PML |
-			SECONDARY_EXEC_PCOMMIT |
 			SECONDARY_EXEC_TSC_SCALING;
 		if (adjust_vmx_controls(min2, opt2,
 					MSR_IA32_VMX_PROCBASED_CTLS2,
@@ -4858,9 +4856,6 @@ static u32 vmx_secondary_exec_control(struct vcpu_vmx *vmx)
 	if (!enable_pml)
 		exec_control &= ~SECONDARY_EXEC_ENABLE_PML;
 
-	/* Currently, we allow L1 guest to directly run pcommit instruction. */
-	exec_control &= ~SECONDARY_EXEC_PCOMMIT;
-
 	return exec_control;
 }
 
@@ -4904,9 +4899,10 @@ static int vmx_vcpu_setup(struct vcpu_vmx *vmx)
 
 	vmcs_write32(CPU_BASED_VM_EXEC_CONTROL, vmx_exec_control(vmx));
 
-	if (cpu_has_secondary_exec_ctrls())
+	if (cpu_has_secondary_exec_ctrls()) {
 		vmcs_write32(SECONDARY_VM_EXEC_CONTROL,
 				vmx_secondary_exec_control(vmx));
+	}
 
 	if (kvm_vcpu_apicv_active(&vmx->vcpu)) {
 		vmcs_write64(EOI_EXIT_BITMAP0, 0);
@@ -7564,13 +7560,6 @@ static int handle_pml_full(struct kvm_vcpu *vcpu)
 	return 1;
 }
 
-static int handle_pcommit(struct kvm_vcpu *vcpu)
-{
-	/* we never catch pcommit instruct for L1 guest. */
-	WARN_ON(1);
-	return 1;
-}
-
 /*
  * The exit handlers return 1 if the exit was handled fully and guest execution
  * may resume.  Otherwise they set the kvm_run parameter to indicate what needs
@@ -7621,7 +7610,6 @@ static int (*const kvm_vmx_exit_handlers[])(struct kvm_vcpu *vcpu) = {
 	[EXIT_REASON_XSAVES]                  = handle_xsaves,
 	[EXIT_REASON_XRSTORS]                 = handle_xrstors,
 	[EXIT_REASON_PML_FULL]		      = handle_pml_full,
-	[EXIT_REASON_PCOMMIT]                 = handle_pcommit,
 };
 
 static const int kvm_vmx_max_exit_handlers =
@@ -7930,8 +7918,6 @@ static bool nested_vmx_exit_handled(struct kvm_vcpu *vcpu)
 		 * the XSS exit bitmap in vmcs12.
 		 */
 		return nested_cpu_has2(vmcs12, SECONDARY_EXEC_XSAVES);
-	case EXIT_REASON_PCOMMIT:
-		return nested_cpu_has2(vmcs12, SECONDARY_EXEC_PCOMMIT);
 	default:
 		return true;
 	}
@@ -9094,15 +9080,6 @@ static void vmx_cpuid_update(struct kvm_vcpu *vcpu)
 
 	if (cpu_has_secondary_exec_ctrls())
 		vmcs_set_secondary_exec_control(secondary_exec_ctl);
-
-	if (static_cpu_has(X86_FEATURE_PCOMMIT) && nested) {
-		if (guest_cpuid_has_pcommit(vcpu))
-			vmx->nested.nested_vmx_secondary_ctls_high |=
-				SECONDARY_EXEC_PCOMMIT;
-		else
-			vmx->nested.nested_vmx_secondary_ctls_high &=
-				~SECONDARY_EXEC_PCOMMIT;
-	}
 }
 
 static void vmx_set_supported_cpuid(u32 func, struct kvm_cpuid_entry2 *entry)
@@ -9715,8 +9692,7 @@ static void prepare_vmcs02(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12)
 		exec_control &= ~(SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES |
 				  SECONDARY_EXEC_RDTSCP |
 				  SECONDARY_EXEC_VIRTUAL_INTR_DELIVERY |
-				  SECONDARY_EXEC_APIC_REGISTER_VIRT |
-				  SECONDARY_EXEC_PCOMMIT);
+				  SECONDARY_EXEC_APIC_REGISTER_VIRT);
 		if (nested_cpu_has(vmcs12,
 				CPU_BASED_ACTIVATE_SECONDARY_CONTROLS))
 			exec_control |= vmcs12->secondary_vm_exec_control;