summaryrefslogtreecommitdiff
path: root/arch/x86/math-emu/fpu_entry.c
diff options
context:
space:
mode:
authorThomas Gleixner <tglx@linutronix.de>2007-10-11 11:16:31 +0200
committerThomas Gleixner <tglx@linutronix.de>2007-10-11 11:16:31 +0200
commitda957e111bb0c189a4a3bf8a00caaecb59ed94ca (patch)
tree6916075fdd3e28869dcd3dfa2cf160a74d1cb02e /arch/x86/math-emu/fpu_entry.c
parent2ec1df4130c60d1eb49dc0fa0ed15858fede6b05 (diff)
i386: move math-emu
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Diffstat (limited to 'arch/x86/math-emu/fpu_entry.c')
-rw-r--r--arch/x86/math-emu/fpu_entry.c761
1 files changed, 761 insertions, 0 deletions
diff --git a/arch/x86/math-emu/fpu_entry.c b/arch/x86/math-emu/fpu_entry.c
new file mode 100644
index 000000000000..1853524c8b57
--- /dev/null
+++ b/arch/x86/math-emu/fpu_entry.c
@@ -0,0 +1,761 @@
+/*---------------------------------------------------------------------------+
+ | fpu_entry.c |
+ | |
+ | The entry functions for wm-FPU-emu |
+ | |
+ | Copyright (C) 1992,1993,1994,1996,1997 |
+ | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, Australia |
+ | E-mail billm@suburbia.net |
+ | |
+ | See the files "README" and "COPYING" for further copyright and warranty |
+ | information. |
+ | |
+ +---------------------------------------------------------------------------*/
+
+/*---------------------------------------------------------------------------+
+ | Note: |
+ | The file contains code which accesses user memory. |
+ | Emulator static data may change when user memory is accessed, due to |
+ | other processes using the emulator while swapping is in progress. |
+ +---------------------------------------------------------------------------*/
+
+/*---------------------------------------------------------------------------+
+ | math_emulate(), restore_i387_soft() and save_i387_soft() are the only |
+ | entry points for wm-FPU-emu. |
+ +---------------------------------------------------------------------------*/
+
+#include <linux/signal.h>
+#include <linux/ptrace.h>
+
+#include <asm/uaccess.h>
+#include <asm/desc.h>
+
+#include "fpu_system.h"
+#include "fpu_emu.h"
+#include "exception.h"
+#include "control_w.h"
+#include "status_w.h"
+
+#define __BAD__ FPU_illegal /* Illegal on an 80486, causes SIGILL */
+
+#ifndef NO_UNDOC_CODE /* Un-documented FPU op-codes supported by default. */
+
+/* WARNING: These codes are not documented by Intel in their 80486 manual
+ and may not work on FPU clones or later Intel FPUs. */
+
+/* Changes to support the un-doc codes provided by Linus Torvalds. */
+
+#define _d9_d8_ fstp_i /* unofficial code (19) */
+#define _dc_d0_ fcom_st /* unofficial code (14) */
+#define _dc_d8_ fcompst /* unofficial code (1c) */
+#define _dd_c8_ fxch_i /* unofficial code (0d) */
+#define _de_d0_ fcompst /* unofficial code (16) */
+#define _df_c0_ ffreep /* unofficial code (07) ffree + pop */
+#define _df_c8_ fxch_i /* unofficial code (0f) */
+#define _df_d0_ fstp_i /* unofficial code (17) */
+#define _df_d8_ fstp_i /* unofficial code (1f) */
+
+static FUNC const st_instr_table[64] = {
+ fadd__, fld_i_, __BAD__, __BAD__, fadd_i, ffree_, faddp_, _df_c0_,
+ fmul__, fxch_i, __BAD__, __BAD__, fmul_i, _dd_c8_, fmulp_, _df_c8_,
+ fcom_st, fp_nop, __BAD__, __BAD__, _dc_d0_, fst_i_, _de_d0_, _df_d0_,
+ fcompst, _d9_d8_, __BAD__, __BAD__, _dc_d8_, fstp_i, fcompp, _df_d8_,
+ fsub__, FPU_etc, __BAD__, finit_, fsubri, fucom_, fsubrp, fstsw_,
+ fsubr_, fconst, fucompp, __BAD__, fsub_i, fucomp, fsubp_, __BAD__,
+ fdiv__, FPU_triga, __BAD__, __BAD__, fdivri, __BAD__, fdivrp, __BAD__,
+ fdivr_, FPU_trigb, __BAD__, __BAD__, fdiv_i, __BAD__, fdivp_, __BAD__,
+};
+
+#else /* Support only documented FPU op-codes */
+
+static FUNC const st_instr_table[64] = {
+ fadd__, fld_i_, __BAD__, __BAD__, fadd_i, ffree_, faddp_, __BAD__,
+ fmul__, fxch_i, __BAD__, __BAD__, fmul_i, __BAD__, fmulp_, __BAD__,
+ fcom_st, fp_nop, __BAD__, __BAD__, __BAD__, fst_i_, __BAD__, __BAD__,
+ fcompst, __BAD__, __BAD__, __BAD__, __BAD__, fstp_i, fcompp, __BAD__,
+ fsub__, FPU_etc, __BAD__, finit_, fsubri, fucom_, fsubrp, fstsw_,
+ fsubr_, fconst, fucompp, __BAD__, fsub_i, fucomp, fsubp_, __BAD__,
+ fdiv__, FPU_triga, __BAD__, __BAD__, fdivri, __BAD__, fdivrp, __BAD__,
+ fdivr_, FPU_trigb, __BAD__, __BAD__, fdiv_i, __BAD__, fdivp_, __BAD__,
+};
+
+#endif /* NO_UNDOC_CODE */
+
+
+#define _NONE_ 0 /* Take no special action */
+#define _REG0_ 1 /* Need to check for not empty st(0) */
+#define _REGI_ 2 /* Need to check for not empty st(0) and st(rm) */
+#define _REGi_ 0 /* Uses st(rm) */
+#define _PUSH_ 3 /* Need to check for space to push onto stack */
+#define _null_ 4 /* Function illegal or not implemented */
+#define _REGIi 5 /* Uses st(0) and st(rm), result to st(rm) */
+#define _REGIp 6 /* Uses st(0) and st(rm), result to st(rm) then pop */
+#define _REGIc 0 /* Compare st(0) and st(rm) */
+#define _REGIn 0 /* Uses st(0) and st(rm), but handle checks later */
+
+#ifndef NO_UNDOC_CODE
+
+/* Un-documented FPU op-codes supported by default. (see above) */
+
+static u_char const type_table[64] = {
+ _REGI_, _NONE_, _null_, _null_, _REGIi, _REGi_, _REGIp, _REGi_,
+ _REGI_, _REGIn, _null_, _null_, _REGIi, _REGI_, _REGIp, _REGI_,
+ _REGIc, _NONE_, _null_, _null_, _REGIc, _REG0_, _REGIc, _REG0_,
+ _REGIc, _REG0_, _null_, _null_, _REGIc, _REG0_, _REGIc, _REG0_,
+ _REGI_, _NONE_, _null_, _NONE_, _REGIi, _REGIc, _REGIp, _NONE_,
+ _REGI_, _NONE_, _REGIc, _null_, _REGIi, _REGIc, _REGIp, _null_,
+ _REGI_, _NONE_, _null_, _null_, _REGIi, _null_, _REGIp, _null_,
+ _REGI_, _NONE_, _null_, _null_, _REGIi, _null_, _REGIp, _null_
+};
+
+#else /* Support only documented FPU op-codes */
+
+static u_char const type_table[64] = {
+ _REGI_, _NONE_, _null_, _null_, _REGIi, _REGi_, _REGIp, _null_,
+ _REGI_, _REGIn, _null_, _null_, _REGIi, _null_, _REGIp, _null_,
+ _REGIc, _NONE_, _null_, _null_, _null_, _REG0_, _null_, _null_,
+ _REGIc, _null_, _null_, _null_, _null_, _REG0_, _REGIc, _null_,
+ _REGI_, _NONE_, _null_, _NONE_, _REGIi, _REGIc, _REGIp, _NONE_,
+ _REGI_, _NONE_, _REGIc, _null_, _REGIi, _REGIc, _REGIp, _null_,
+ _REGI_, _NONE_, _null_, _null_, _REGIi, _null_, _REGIp, _null_,
+ _REGI_, _NONE_, _null_, _null_, _REGIi, _null_, _REGIp, _null_
+};
+
+#endif /* NO_UNDOC_CODE */
+
+
+#ifdef RE_ENTRANT_CHECKING
+u_char emulating=0;
+#endif /* RE_ENTRANT_CHECKING */
+
+static int valid_prefix(u_char *Byte, u_char __user **fpu_eip,
+ overrides *override);
+
+asmlinkage void math_emulate(long arg)
+{
+ u_char FPU_modrm, byte1;
+ unsigned short code;
+ fpu_addr_modes addr_modes;
+ int unmasked;
+ FPU_REG loaded_data;
+ FPU_REG *st0_ptr;
+ u_char loaded_tag, st0_tag;
+ void __user *data_address;
+ struct address data_sel_off;
+ struct address entry_sel_off;
+ unsigned long code_base = 0;
+ unsigned long code_limit = 0; /* Initialized to stop compiler warnings */
+ struct desc_struct code_descriptor;
+
+#ifdef RE_ENTRANT_CHECKING
+ if ( emulating )
+ {
+ printk("ERROR: wm-FPU-emu is not RE-ENTRANT!\n");
+ }
+ RE_ENTRANT_CHECK_ON;
+#endif /* RE_ENTRANT_CHECKING */
+
+ if (!used_math())
+ {
+ finit();
+ set_used_math();
+ }
+
+ SETUP_DATA_AREA(arg);
+
+ FPU_ORIG_EIP = FPU_EIP;
+
+ if ( (FPU_EFLAGS & 0x00020000) != 0 )
+ {
+ /* Virtual 8086 mode */
+ addr_modes.default_mode = VM86;
+ FPU_EIP += code_base = FPU_CS << 4;
+ code_limit = code_base + 0xffff; /* Assumes code_base <= 0xffff0000 */
+ }
+ else if ( FPU_CS == __USER_CS && FPU_DS == __USER_DS )
+ {
+ addr_modes.default_mode = 0;
+ }
+ else if ( FPU_CS == __KERNEL_CS )
+ {
+ printk("math_emulate: %04x:%08lx\n",FPU_CS,FPU_EIP);
+ panic("Math emulation needed in kernel");
+ }
+ else
+ {
+
+ if ( (FPU_CS & 4) != 4 ) /* Must be in the LDT */
+ {
+ /* Can only handle segmented addressing via the LDT
+ for now, and it must be 16 bit */
+ printk("FPU emulator: Unsupported addressing mode\n");
+ math_abort(FPU_info, SIGILL);
+ }
+
+ code_descriptor = LDT_DESCRIPTOR(FPU_CS);
+ if ( SEG_D_SIZE(code_descriptor) )
+ {
+ /* The above test may be wrong, the book is not clear */
+ /* Segmented 32 bit protected mode */
+ addr_modes.default_mode = SEG32;
+ }
+ else
+ {
+ /* 16 bit protected mode */
+ addr_modes.default_mode = PM16;
+ }
+ FPU_EIP += code_base = SEG_BASE_ADDR(code_descriptor);
+ code_limit = code_base
+ + (SEG_LIMIT(code_descriptor)+1) * SEG_GRANULARITY(code_descriptor)
+ - 1;
+ if ( code_limit < code_base ) code_limit = 0xffffffff;
+ }
+
+ FPU_lookahead = 1;
+ if (current->ptrace & PT_PTRACED)
+ FPU_lookahead = 0;
+
+ if ( !valid_prefix(&byte1, (u_char __user **)&FPU_EIP,
+ &addr_modes.override) )
+ {
+ RE_ENTRANT_CHECK_OFF;
+ printk("FPU emulator: Unknown prefix byte 0x%02x, probably due to\n"
+ "FPU emulator: self-modifying code! (emulation impossible)\n",
+ byte1);
+ RE_ENTRANT_CHECK_ON;
+ EXCEPTION(EX_INTERNAL|0x126);
+ math_abort(FPU_info,SIGILL);
+ }
+
+do_another_FPU_instruction:
+
+ no_ip_update = 0;
+
+ FPU_EIP++; /* We have fetched the prefix and first code bytes. */
+
+ if ( addr_modes.default_mode )
+ {
+ /* This checks for the minimum instruction bytes.
+ We also need to check any extra (address mode) code access. */
+ if ( FPU_EIP > code_limit )
+ math_abort(FPU_info,SIGSEGV);
+ }
+
+ if ( (byte1 & 0xf8) != 0xd8 )
+ {
+ if ( byte1 == FWAIT_OPCODE )
+ {
+ if (partial_status & SW_Summary)
+ goto do_the_FPU_interrupt;
+ else
+ goto FPU_fwait_done;
+ }
+#ifdef PARANOID
+ EXCEPTION(EX_INTERNAL|0x128);
+ math_abort(FPU_info,SIGILL);
+#endif /* PARANOID */
+ }
+
+ RE_ENTRANT_CHECK_OFF;
+ FPU_code_access_ok(1);
+ FPU_get_user(FPU_modrm, (u_char __user *) FPU_EIP);
+ RE_ENTRANT_CHECK_ON;
+ FPU_EIP++;
+
+ if (partial_status & SW_Summary)
+ {
+ /* Ignore the error for now if the current instruction is a no-wait
+ control instruction */
+ /* The 80486 manual contradicts itself on this topic,
+ but a real 80486 uses the following instructions:
+ fninit, fnstenv, fnsave, fnstsw, fnstenv, fnclex.
+ */
+ code = (FPU_modrm << 8) | byte1;
+ if ( ! ( (((code & 0xf803) == 0xe003) || /* fnclex, fninit, fnstsw */
+ (((code & 0x3003) == 0x3001) && /* fnsave, fnstcw, fnstenv,
+ fnstsw */
+ ((code & 0xc000) != 0xc000))) ) )
+ {
+ /*
+ * We need to simulate the action of the kernel to FPU
+ * interrupts here.
+ */
+ do_the_FPU_interrupt:
+
+ FPU_EIP = FPU_ORIG_EIP; /* Point to current FPU instruction. */
+
+ RE_ENTRANT_CHECK_OFF;
+ current->thread.trap_no = 16;
+ current->thread.error_code = 0;
+ send_sig(SIGFPE, current, 1);
+ return;
+ }
+ }
+
+ entry_sel_off.offset = FPU_ORIG_EIP;
+ entry_sel_off.selector = FPU_CS;
+ entry_sel_off.opcode = (byte1 << 8) | FPU_modrm;
+
+ FPU_rm = FPU_modrm & 7;
+
+ if ( FPU_modrm < 0300 )
+ {
+ /* All of these instructions use the mod/rm byte to get a data address */
+
+ if ( (addr_modes.default_mode & SIXTEEN)
+ ^ (addr_modes.override.address_size == ADDR_SIZE_PREFIX) )
+ data_address = FPU_get_address_16(FPU_modrm, &FPU_EIP, &data_sel_off,
+ addr_modes);
+ else
+ data_address = FPU_get_address(FPU_modrm, &FPU_EIP, &data_sel_off,
+ addr_modes);
+
+ if ( addr_modes.default_mode )
+ {
+ if ( FPU_EIP-1 > code_limit )
+ math_abort(FPU_info,SIGSEGV);
+ }
+
+ if ( !(byte1 & 1) )
+ {
+ unsigned short status1 = partial_status;
+
+ st0_ptr = &st(0);
+ st0_tag = FPU_gettag0();
+
+ /* Stack underflow has priority */
+ if ( NOT_EMPTY_ST0 )
+ {
+ if ( addr_modes.default_mode & PROTECTED )
+ {
+ /* This table works for 16 and 32 bit protected mode */
+ if ( access_limit < data_sizes_16[(byte1 >> 1) & 3] )
+ math_abort(FPU_info,SIGSEGV);
+ }
+
+ unmasked = 0; /* Do this here to stop compiler warnings. */
+ switch ( (byte1 >> 1) & 3 )
+ {
+ case 0:
+ unmasked = FPU_load_single((float __user *)data_address,
+ &loaded_data);
+ loaded_tag = unmasked & 0xff;
+ unmasked &= ~0xff;
+ break;
+ case 1:
+ loaded_tag = FPU_load_int32((long __user *)data_address, &loaded_data);
+ break;
+ case 2:
+ unmasked = FPU_load_double((double __user *)data_address,
+ &loaded_data);
+ loaded_tag = unmasked & 0xff;
+ unmasked &= ~0xff;
+ break;
+ case 3:
+ default: /* Used here to suppress gcc warnings. */
+ loaded_tag = FPU_load_int16((short __user *)data_address, &loaded_data);
+ break;
+ }
+
+ /* No more access to user memory, it is safe
+ to use static data now */
+
+ /* NaN operands have the next priority. */
+ /* We have to delay looking at st(0) until after
+ loading the data, because that data might contain an SNaN */
+ if ( ((st0_tag == TAG_Special) && isNaN(st0_ptr)) ||
+ ((loaded_tag == TAG_Special) && isNaN(&loaded_data)) )
+ {
+ /* Restore the status word; we might have loaded a
+ denormal. */
+ partial_status = status1;
+ if ( (FPU_modrm & 0x30) == 0x10 )
+ {
+ /* fcom or fcomp */
+ EXCEPTION(EX_Invalid);
+ setcc(SW_C3 | SW_C2 | SW_C0);
+ if ( (FPU_modrm & 0x08) && (control_word & CW_Invalid) )
+ FPU_pop(); /* fcomp, masked, so we pop. */
+ }
+ else
+ {
+ if ( loaded_tag == TAG_Special )
+ loaded_tag = FPU_Special(&loaded_data);
+#ifdef PECULIAR_486
+ /* This is not really needed, but gives behaviour
+ identical to an 80486 */
+ if ( (FPU_modrm & 0x28) == 0x20 )
+ /* fdiv or fsub */
+ real_2op_NaN(&loaded_data, loaded_tag, 0, &loaded_data);
+ else
+#endif /* PECULIAR_486 */
+ /* fadd, fdivr, fmul, or fsubr */
+ real_2op_NaN(&loaded_data, loaded_tag, 0, st0_ptr);
+ }
+ goto reg_mem_instr_done;
+ }
+
+ if ( unmasked && !((FPU_modrm & 0x30) == 0x10) )
+ {
+ /* Is not a comparison instruction. */
+ if ( (FPU_modrm & 0x38) == 0x38 )
+ {
+ /* fdivr */
+ if ( (st0_tag == TAG_Zero) &&
+ ((loaded_tag == TAG_Valid)
+ || (loaded_tag == TAG_Special
+ && isdenormal(&loaded_data))) )
+ {
+ if ( FPU_divide_by_zero(0, getsign(&loaded_data))
+ < 0 )
+ {
+ /* We use the fact here that the unmasked
+ exception in the loaded data was for a
+ denormal operand */
+ /* Restore the state of the denormal op bit */
+ partial_status &= ~SW_Denorm_Op;
+ partial_status |= status1 & SW_Denorm_Op;
+ }
+ else
+ setsign(st0_ptr, getsign(&loaded_data));
+ }
+ }
+ goto reg_mem_instr_done;
+ }
+
+ switch ( (FPU_modrm >> 3) & 7 )
+ {
+ case 0: /* fadd */
+ clear_C1();
+ FPU_add(&loaded_data, loaded_tag, 0, control_word);
+ break;
+ case 1: /* fmul */
+ clear_C1();
+ FPU_mul(&loaded_data, loaded_tag, 0, control_word);
+ break;
+ case 2: /* fcom */
+ FPU_compare_st_data(&loaded_data, loaded_tag);
+ break;
+ case 3: /* fcomp */
+ if ( !FPU_compare_st_data(&loaded_data, loaded_tag)
+ && !unmasked )
+ FPU_pop();
+ break;
+ case 4: /* fsub */
+ clear_C1();
+ FPU_sub(LOADED|loaded_tag, (int)&loaded_data, control_word);
+ break;
+ case 5: /* fsubr */
+ clear_C1();
+ FPU_sub(REV|LOADED|loaded_tag, (int)&loaded_data, control_word);
+ break;
+ case 6: /* fdiv */
+ clear_C1();
+ FPU_div(LOADED|loaded_tag, (int)&loaded_data, control_word);
+ break;
+ case 7: /* fdivr */
+ clear_C1();
+ if ( st0_tag == TAG_Zero )
+ partial_status = status1; /* Undo any denorm tag,
+ zero-divide has priority. */
+ FPU_div(REV|LOADED|loaded_tag, (int)&loaded_data, control_word);
+ break;
+ }
+ }
+ else
+ {
+ if ( (FPU_modrm & 0x30) == 0x10 )
+ {
+ /* The instruction is fcom or fcomp */
+ EXCEPTION(EX_StackUnder);
+ setcc(SW_C3 | SW_C2 | SW_C0);
+ if ( (FPU_modrm & 0x08) && (control_word & CW_Invalid) )
+ FPU_pop(); /* fcomp */
+ }
+ else
+ FPU_stack_underflow();
+ }
+ reg_mem_instr_done:
+ operand_address = data_sel_off;
+ }
+ else
+ {
+ if ( !(no_ip_update =
+ FPU_load_store(((FPU_modrm & 0x38) | (byte1 & 6)) >> 1,
+ addr_modes, data_address)) )
+ {
+ operand_address = data_sel_off;
+ }
+ }
+
+ }
+ else
+ {
+ /* None of these instructions access user memory */
+ u_char instr_index = (FPU_modrm & 0x38) | (byte1 & 7);
+
+#ifdef PECULIAR_486
+ /* This is supposed to be undefined, but a real 80486 seems
+ to do this: */
+ operand_address.offset = 0;
+ operand_address.selector = FPU_DS;
+#endif /* PECULIAR_486 */
+
+ st0_ptr = &st(0);
+ st0_tag = FPU_gettag0();
+ switch ( type_table[(int) instr_index] )
+ {
+ case _NONE_: /* also _REGIc: _REGIn */
+ break;
+ case _REG0_:
+ if ( !NOT_EMPTY_ST0 )
+ {
+ FPU_stack_underflow();
+ goto FPU_instruction_done;
+ }
+ break;
+ case _REGIi:
+ if ( !NOT_EMPTY_ST0 || !NOT_EMPTY(FPU_rm) )
+ {
+ FPU_stack_underflow_i(FPU_rm);
+ goto FPU_instruction_done;
+ }
+ break;
+ case _REGIp:
+ if ( !NOT_EMPTY_ST0 || !NOT_EMPTY(FPU_rm) )
+ {
+ FPU_stack_underflow_pop(FPU_rm);
+ goto FPU_instruction_done;
+ }
+ break;
+ case _REGI_:
+ if ( !NOT_EMPTY_ST0 || !NOT_EMPTY(FPU_rm) )
+ {
+ FPU_stack_underflow();
+ goto FPU_instruction_done;
+ }
+ break;
+ case _PUSH_: /* Only used by the fld st(i) instruction */
+ break;
+ case _null_:
+ FPU_illegal();
+ goto FPU_instruction_done;
+ default:
+ EXCEPTION(EX_INTERNAL|0x111);
+ goto FPU_instruction_done;
+ }
+ (*st_instr_table[(int) instr_index])();
+
+FPU_instruction_done:
+ ;
+ }
+
+ if ( ! no_ip_update )
+ instruction_address = entry_sel_off;
+
+FPU_fwait_done:
+
+#ifdef DEBUG
+ RE_ENTRANT_CHECK_OFF;
+ FPU_printall();
+ RE_ENTRANT_CHECK_ON;
+#endif /* DEBUG */
+
+ if (FPU_lookahead && !need_resched())
+ {
+ FPU_ORIG_EIP = FPU_EIP - code_base;
+ if ( valid_prefix(&byte1, (u_char __user **)&FPU_EIP,
+ &addr_modes.override) )
+ goto do_another_FPU_instruction;
+ }
+
+ if ( addr_modes.default_mode )
+ FPU_EIP -= code_base;
+
+ RE_ENTRANT_CHECK_OFF;
+}
+
+
+/* Support for prefix bytes is not yet complete. To properly handle
+ all prefix bytes, further changes are needed in the emulator code
+ which accesses user address space. Access to separate segments is
+ important for msdos emulation. */
+static int valid_prefix(u_char *Byte, u_char __user **fpu_eip,
+ overrides *override)
+{
+ u_char byte;
+ u_char __user *ip = *fpu_eip;
+
+ *override = (overrides) { 0, 0, PREFIX_DEFAULT }; /* defaults */
+
+ RE_ENTRANT_CHECK_OFF;
+ FPU_code_access_ok(1);
+ FPU_get_user(byte, ip);
+ RE_ENTRANT_CHECK_ON;
+
+ while ( 1 )
+ {
+ switch ( byte )
+ {
+ case ADDR_SIZE_PREFIX:
+ override->address_size = ADDR_SIZE_PREFIX;
+ goto do_next_byte;
+
+ case OP_SIZE_PREFIX:
+ override->operand_size = OP_SIZE_PREFIX;
+ goto do_next_byte;
+
+ case PREFIX_CS:
+ override->segment = PREFIX_CS_;
+ goto do_next_byte;
+ case PREFIX_ES:
+ override->segment = PREFIX_ES_;
+ goto do_next_byte;
+ case PREFIX_SS:
+ override->segment = PREFIX_SS_;
+ goto do_next_byte;
+ case PREFIX_FS:
+ override->segment = PREFIX_FS_;
+ goto do_next_byte;
+ case PREFIX_GS:
+ override->segment = PREFIX_GS_;
+ goto do_next_byte;
+ case PREFIX_DS:
+ override->segment = PREFIX_DS_;
+ goto do_next_byte;
+
+/* lock is not a valid prefix for FPU instructions,
+ let the cpu handle it to generate a SIGILL. */
+/* case PREFIX_LOCK: */
+
+ /* rep.. prefixes have no meaning for FPU instructions */
+ case PREFIX_REPE:
+ case PREFIX_REPNE:
+
+ do_next_byte:
+ ip++;
+ RE_ENTRANT_CHECK_OFF;
+ FPU_code_access_ok(1);
+ FPU_get_user(byte, ip);
+ RE_ENTRANT_CHECK_ON;
+ break;
+ case FWAIT_OPCODE:
+ *Byte = byte;
+ return 1;
+ default:
+ if ( (byte & 0xf8) == 0xd8 )
+ {
+ *Byte = byte;
+ *fpu_eip = ip;
+ return 1;
+ }
+ else
+ {
+ /* Not a valid sequence of prefix bytes followed by
+ an FPU instruction. */
+ *Byte = byte; /* Needed for error message. */
+ return 0;
+ }
+ }
+ }
+}
+
+
+void math_abort(struct info * info, unsigned int signal)
+{
+ FPU_EIP = FPU_ORIG_EIP;
+ current->thread.trap_no = 16;
+ current->thread.error_code = 0;
+ send_sig(signal,current,1);
+ RE_ENTRANT_CHECK_OFF;
+ __asm__("movl %0,%%esp ; ret": :"g" (((long) info)-4));
+#ifdef PARANOID
+ printk("ERROR: wm-FPU-emu math_abort failed!\n");
+#endif /* PARANOID */
+}
+
+
+
+#define S387 ((struct i387_soft_struct *)s387)
+#define sstatus_word() \
+ ((S387->swd & ~SW_Top & 0xffff) | ((S387->ftop << SW_Top_Shift) & SW_Top))
+
+int restore_i387_soft(void *s387, struct _fpstate __user *buf)
+{
+ u_char __user *d = (u_char __user *)buf;
+ int offset, other, i, tags, regnr, tag, newtop;
+
+ RE_ENTRANT_CHECK_OFF;
+ FPU_access_ok(VERIFY_READ, d, 7*4 + 8*10);
+ if (__copy_from_user(&S387->cwd, d, 7*4))
+ return -1;
+ RE_ENTRANT_CHECK_ON;
+
+ d += 7*4;
+
+ S387->ftop = (S387->swd >> SW_Top_Shift) & 7;
+ offset = (S387->ftop & 7) * 10;
+ other = 80 - offset;
+
+ RE_ENTRANT_CHECK_OFF;
+ /* Copy all registers in stack order. */
+ if (__copy_from_user(((u_char *)&S387->st_space)+offset, d, other))
+ return -1;
+ if ( offset )
+ if (__copy_from_user((u_char *)&S387->st_space, d+other, offset))
+ return -1;
+ RE_ENTRANT_CHECK_ON;
+
+ /* The tags may need to be corrected now. */
+ tags = S387->twd;
+ newtop = S387->ftop;
+ for ( i = 0; i < 8; i++ )
+ {
+ regnr = (i+newtop) & 7;
+ if ( ((tags >> ((regnr & 7)*2)) & 3) != TAG_Empty )
+ {
+ /* The loaded data over-rides all other cases. */
+ tag = FPU_tagof((FPU_REG *)((u_char *)S387->st_space + 10*regnr));
+ tags &= ~(3 << (regnr*2));
+ tags |= (tag & 3) << (regnr*2);
+ }
+ }
+ S387->twd = tags;
+
+ return 0;
+}
+
+
+int save_i387_soft(void *s387, struct _fpstate __user * buf)
+{
+ u_char __user *d = (u_char __user *)buf;
+ int offset = (S387->ftop & 7) * 10, other = 80 - offset;
+
+ RE_ENTRANT_CHECK_OFF;
+ FPU_access_ok(VERIFY_WRITE, d, 7*4 + 8*10);
+#ifdef PECULIAR_486
+ S387->cwd &= ~0xe080;
+ /* An 80486 sets nearly all of the reserved bits to 1. */
+ S387->cwd |= 0xffff0040;
+ S387->swd = sstatus_word() | 0xffff0000;
+ S387->twd |= 0xffff0000;
+ S387->fcs &= ~0xf8000000;
+ S387->fos |= 0xffff0000;
+#endif /* PECULIAR_486 */
+ if (__copy_to_user(d, &S387->cwd, 7*4))
+ return -1;
+ RE_ENTRANT_CHECK_ON;
+
+ d += 7*4;
+
+ RE_ENTRANT_CHECK_OFF;
+ /* Copy all registers in stack order. */
+ if (__copy_to_user(d, ((u_char *)&S387->st_space)+offset, other))
+ return -1;
+ if ( offset )
+ if (__copy_to_user(d+other, (u_char *)&S387->st_space, offset))
+ return -1;
+ RE_ENTRANT_CHECK_ON;
+
+ return 1;
+}