summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
authorThomas Gleixner <tglx@linutronix.de>2008-05-18 11:54:43 +0200
committerThomas Gleixner <tglx@linutronix.de>2008-05-18 11:54:43 +0200
commitb4ef290d7c3abd1bf8cefcf8def359537fda7f31 (patch)
treef3e270923fa36c773eee3bb1f9981aab1711d938 /arch
parent77b52b4c5c66175553ee59eb43f74366f1e54bde (diff)
parentf26a3988917913b3d11b2bd741601a2c64ab9204 (diff)
Merge branch 'linus' into x86/pat
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/mach-at91/at91sam9261_devices.c4
-rw-r--r--arch/arm/mach-at91/at91sam9rl_devices.c21
-rw-r--r--arch/ia64/Kconfig13
-rw-r--r--arch/ia64/Makefile2
-rw-r--r--arch/ia64/ia32/ia32_support.c10
-rw-r--r--arch/ia64/kernel/acpi.c10
-rw-r--r--arch/ia64/kernel/entry.S26
-rw-r--r--arch/ia64/kernel/palinfo.c6
-rw-r--r--arch/ia64/kernel/perfmon.c16
-rw-r--r--arch/ia64/kernel/process.c25
-rw-r--r--arch/ia64/kernel/sal.c11
-rw-r--r--arch/ia64/kernel/setup.c29
-rw-r--r--arch/ia64/mm/init.c25
-rw-r--r--arch/ia64/uv/Makefile12
-rw-r--r--arch/ia64/uv/kernel/Makefile13
-rw-r--r--arch/ia64/uv/kernel/machvec.c11
-rw-r--r--arch/ia64/uv/kernel/setup.c98
-rw-r--r--arch/m68knommu/Kconfig3
-rw-r--r--arch/m68knommu/kernel/vmlinux.lds.S10
-rw-r--r--arch/mips/au1000/common/Makefile7
-rw-r--r--arch/mips/au1000/common/au1xxx_irqmap.c145
-rw-r--r--arch/mips/au1000/common/clocks.c24
-rw-r--r--arch/mips/au1000/common/cputable.c5
-rw-r--r--arch/mips/au1000/common/dbdma.c389
-rw-r--r--arch/mips/au1000/common/dbg_io.c32
-rw-r--r--arch/mips/au1000/common/dma.c56
-rw-r--r--arch/mips/au1000/common/gpio.c6
-rw-r--r--arch/mips/au1000/common/irq.c6
-rw-r--r--arch/mips/au1000/common/pci.c11
-rw-r--r--arch/mips/au1000/common/platform.c11
-rw-r--r--arch/mips/au1000/common/power.c157
-rw-r--r--arch/mips/au1000/common/prom.c21
-rw-r--r--arch/mips/au1000/common/puts.c35
-rw-r--r--arch/mips/au1000/common/reset.c33
-rw-r--r--arch/mips/au1000/common/setup.c60
-rw-r--r--arch/mips/au1000/common/time.c78
-rw-r--r--arch/mips/au1000/db1x00/Makefile8
-rw-r--r--arch/mips/au1000/db1x00/board_setup.c61
-rw-r--r--arch/mips/au1000/db1x00/init.c11
-rw-r--r--arch/mips/au1000/db1x00/irqmap.c22
-rw-r--r--arch/mips/au1000/mtx-1/Makefile3
-rw-r--r--arch/mips/au1000/mtx-1/board_setup.c63
-rw-r--r--arch/mips/au1000/mtx-1/init.c11
-rw-r--r--arch/mips/au1000/mtx-1/irqmap.c18
-rw-r--r--arch/mips/au1000/mtx-1/platform.c3
-rw-r--r--arch/mips/au1000/pb1000/Makefile8
-rw-r--r--arch/mips/au1000/pb1000/board_setup.c117
-rw-r--r--arch/mips/au1000/pb1000/init.c20
-rw-r--r--arch/mips/au1000/pb1100/Makefile6
-rw-r--r--arch/mips/au1000/pb1100/board_setup.c50
-rw-r--r--arch/mips/au1000/pb1100/init.c11
-rw-r--r--arch/mips/au1000/pb1100/irqmap.c10
-rw-r--r--arch/mips/au1000/pb1200/Makefile2
-rw-r--r--arch/mips/au1000/pb1200/board_setup.c139
-rw-r--r--arch/mips/au1000/pb1200/init.c18
-rw-r--r--arch/mips/au1000/pb1200/irqmap.c66
-rw-r--r--arch/mips/au1000/pb1500/Makefile6
-rw-r--r--arch/mips/au1000/pb1500/board_setup.c46
-rw-r--r--arch/mips/au1000/pb1500/init.c20
-rw-r--r--arch/mips/au1000/pb1500/irqmap.c6
-rw-r--r--arch/mips/au1000/pb1550/Makefile7
-rw-r--r--arch/mips/au1000/pb1550/board_setup.c16
-rw-r--r--arch/mips/au1000/pb1550/init.c20
-rw-r--r--arch/mips/au1000/pb1550/irqmap.c6
-rw-r--r--arch/mips/au1000/xxs1500/Makefile3
-rw-r--r--arch/mips/au1000/xxs1500/board_setup.c39
-rw-r--r--arch/mips/au1000/xxs1500/init.c11
-rw-r--r--arch/mips/au1000/xxs1500/irqmap.c2
-rw-r--r--arch/mips/emma2rh/markeins/setup.c7
-rw-r--r--arch/mips/kernel/Makefile2
-rw-r--r--arch/mips/kernel/cpu-bugs64.c2
-rw-r--r--arch/mips/kernel/irixelf.c11
-rw-r--r--arch/mips/kernel/kspd.c5
-rw-r--r--arch/mips/kernel/rtlx.c65
-rw-r--r--arch/mips/kernel/setup.c1
-rw-r--r--arch/mips/kernel/smp.c4
-rw-r--r--arch/mips/kernel/vpe.c29
-rw-r--r--arch/mips/mm/highmem.c1
-rw-r--r--arch/mips/oprofile/op_model_mipsxx.c6
-rw-r--r--arch/mips/pci/fixup-au1000.c7
-rw-r--r--arch/mips/pci/ops-au1000.c115
-rw-r--r--arch/mips/pmc-sierra/msp71xx/msp_hwbutton.c5
-rw-r--r--arch/mips/sgi-ip27/ip27-timer.c4
-rw-r--r--arch/mn10300/boot/install.sh16
-rw-r--r--arch/parisc/hpux/gate.S3
-rw-r--r--arch/parisc/hpux/wrappers.S3
-rw-r--r--arch/parisc/kernel/Makefile3
-rw-r--r--arch/parisc/kernel/entry.S49
-rw-r--r--arch/parisc/kernel/head.S2
-rw-r--r--arch/parisc/kernel/hpmc.S3
-rw-r--r--arch/parisc/kernel/inventory.c2
-rw-r--r--arch/parisc/kernel/pacache.S73
-rw-r--r--arch/parisc/kernel/perf_asm.S4
-rw-r--r--arch/parisc/kernel/real2.S13
-rw-r--r--arch/parisc/kernel/syscall.S5
-rw-r--r--arch/parisc/kernel/traps.c2
-rw-r--r--arch/parisc/kernel/unaligned.c5
-rw-r--r--arch/parisc/lib/fixup.S3
-rw-r--r--arch/parisc/lib/lusercopy.S5
-rw-r--r--arch/parisc/lib/memcpy.c2
-rw-r--r--arch/parisc/mm/init.c4
-rw-r--r--arch/powerpc/boot/dts/mpc8377_mds.dts27
-rw-r--r--arch/powerpc/boot/dts/mpc8610_hpcd.dts60
-rw-r--r--arch/powerpc/boot/dts/sbc8548.dts94
-rw-r--r--arch/powerpc/configs/mpc8610_hpcd_defconfig95
-rw-r--r--arch/powerpc/kernel/Makefile6
-rw-r--r--arch/powerpc/kernel/cputable.c2
-rw-r--r--arch/powerpc/lib/Makefile2
-rw-r--r--arch/powerpc/mm/hash_utils_64.c28
-rw-r--r--arch/powerpc/mm/init_64.c10
-rw-r--r--arch/powerpc/mm/slb.c16
-rw-r--r--arch/powerpc/mm/slb_low.S16
-rw-r--r--arch/powerpc/platforms/85xx/mpc85xx_mds.c121
-rw-r--r--arch/powerpc/platforms/85xx/sbc8548.c30
-rw-r--r--arch/powerpc/platforms/86xx/mpc8610_hpcd.c15
-rw-r--r--arch/powerpc/platforms/cell/io-workarounds.c6
-rw-r--r--arch/powerpc/platforms/cell/io-workarounds.h6
-rw-r--r--arch/powerpc/platforms/cell/spufs/file.c1
-rw-r--r--arch/powerpc/platforms/cell/spufs/sched.c2
-rw-r--r--arch/ppc/Makefile2
-rw-r--r--arch/ppc/kernel/ppc_ksyms.c1
-rw-r--r--arch/ppc/kernel/setup.c1
-rw-r--r--arch/ppc/platforms/residual.c1
-rw-r--r--arch/s390/kernel/debug.c20
-rw-r--r--arch/s390/kernel/irq.c3
-rw-r--r--arch/s390/kernel/smp.c16
-rw-r--r--arch/s390/mm/vmem.c19
-rw-r--r--arch/sh/kernel/kgdb_stub.c8
-rw-r--r--arch/sparc/kernel/rtrap.S2
-rw-r--r--arch/sparc/kernel/sys_sparc.c48
-rw-r--r--arch/sparc64/kernel/rtrap.S6
-rw-r--r--arch/sparc64/kernel/signal.c21
-rw-r--r--arch/sparc64/kernel/signal32.c13
-rw-r--r--arch/sparc64/kernel/sys_sparc.c36
-rw-r--r--arch/sparc64/kernel/sys_sparc32.c33
-rw-r--r--arch/sparc64/mm/init.c16
-rw-r--r--arch/um/Kconfig.char6
-rw-r--r--arch/um/drivers/chan_user.c1
-rw-r--r--arch/um/drivers/cow_sys.h2
-rw-r--r--arch/um/drivers/daemon_user.c4
-rw-r--r--arch/um/drivers/fd.c2
-rw-r--r--arch/um/drivers/hostaudio_kern.c2
-rw-r--r--arch/um/drivers/mcast_user.c3
-rw-r--r--arch/um/drivers/net_user.c2
-rw-r--r--arch/um/drivers/port_user.c2
-rw-r--r--arch/um/drivers/pty.c2
-rw-r--r--arch/um/drivers/random.c122
-rw-r--r--arch/um/drivers/slip_user.c2
-rw-r--r--arch/um/drivers/tty.c2
-rw-r--r--arch/um/drivers/ubd_kern.c4
-rw-r--r--arch/um/drivers/xterm.c2
-rw-r--r--arch/um/include/as-layout.h14
-rw-r--r--arch/um/include/line.h4
-rw-r--r--arch/um/include/os.h1
-rw-r--r--arch/um/include/process.h20
-rw-r--r--arch/um/include/skas_ptrace.h13
-rw-r--r--arch/um/include/sysdep-i386/ptrace_user.h30
-rw-r--r--arch/um/include/sysdep-i386/sigcontext.h2
-rw-r--r--arch/um/include/sysdep-x86_64/ptrace_user.h17
-rw-r--r--arch/um/include/um_malloc.h9
-rw-r--r--arch/um/kernel/dyn.lds.S7
-rw-r--r--arch/um/kernel/mem.c5
-rw-r--r--arch/um/kernel/time.c4
-rw-r--r--arch/um/kernel/um_arch.c7
-rw-r--r--arch/um/kernel/uml.lds.S7
-rw-r--r--arch/um/os-Linux/drivers/ethertap_user.c4
-rw-r--r--arch/um/os-Linux/helper.c4
-rw-r--r--arch/um/os-Linux/main.c2
-rw-r--r--arch/um/os-Linux/sigio.c39
-rw-r--r--arch/um/os-Linux/signal.c1
-rw-r--r--arch/um/os-Linux/skas/process.c2
-rw-r--r--arch/um/os-Linux/start_up.c81
-rw-r--r--arch/um/os-Linux/sys-i386/registers.c5
-rw-r--r--arch/um/os-Linux/time.c54
-rw-r--r--arch/um/sys-i386/ptrace.c30
-rw-r--r--arch/um/sys-i386/user-offsets.c2
-rw-r--r--arch/um/sys-x86_64/user-offsets.c1
-rw-r--r--arch/x86/kernel/acpi/realmode/wakeup.lds.S10
-rw-r--r--arch/x86/kernel/pci-dma.c8
-rw-r--r--arch/x86/kernel/ptrace.c7
-rw-r--r--arch/x86/kernel/setup.c4
-rw-r--r--arch/x86/kernel/setup_64.c2
-rw-r--r--arch/x86/kernel/smp.c3
-rw-r--r--arch/x86/kernel/smpboot.c24
-rw-r--r--arch/x86/kernel/x8664_ksyms_64.c3
-rw-r--r--arch/x86/lib/csum-partial_64.c2
-rw-r--r--arch/x86/mm/init_32.c12
-rw-r--r--arch/x86/mm/pat.c4
-rw-r--r--arch/x86/pci/i386.c4
189 files changed, 2330 insertions, 1770 deletions
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 728bb8f39441..0babb645b83c 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -544,10 +544,10 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
struct resource *fb_res = &lcdc_resources[2];
size_t fb_len = fb_res->end - fb_res->start + 1;
- fb = ioremap_writecombine(fb_res->start, fb_len);
+ fb = ioremap(fb_res->start, fb_len);
if (fb) {
memset(fb, 0, fb_len);
- iounmap(fb, fb_len);
+ iounmap(fb);
}
}
lcdc_data = *data;
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 054689804e77..450db304936f 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -332,13 +332,6 @@ static struct resource lcdc_resources[] = {
.end = AT91SAM9RL_ID_LCDC,
.flags = IORESOURCE_IRQ,
},
-#if defined(CONFIG_FB_INTSRAM)
- [2] = {
- .start = AT91SAM9RL_SRAM_BASE,
- .end = AT91SAM9RL_SRAM_BASE + AT91SAM9RL_SRAM_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
-#endif
};
static struct platform_device at91_lcdc_device = {
@@ -381,20 +374,6 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
at91_set_B_periph(AT91_PIN_PC24, 0); /* LCDD22 */
at91_set_B_periph(AT91_PIN_PC25, 0); /* LCDD23 */
-#ifdef CONFIG_FB_INTSRAM
- {
- void __iomem *fb;
- struct resource *fb_res = &lcdc_resources[2];
- size_t fb_len = fb_res->end - fb_res->start + 1;
-
- fb = ioremap_writecombine(fb_res->start, fb_len);
- if (fb) {
- memset(fb, 0, fb_len);
- iounmap(fb, fb_len);
- }
- }
-#endif
-
lcdc_data = *data;
platform_device_register(&at91_lcdc_device);
}
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 0df5f6f75edf..16be41446b5b 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -135,6 +135,7 @@ config IA64_GENERIC
HP-zx1/sx1000 For HP systems
HP-zx1/sx1000+swiotlb For HP systems with (broken) DMA-constrained devices.
SGI-SN2 For SGI Altix systems
+ SGI-UV For SGI UV systems
Ski-simulator For the HP simulator <http://www.hpl.hp.com/research/linux/ski/>
If you don't know what to do, choose "generic".
@@ -170,6 +171,18 @@ config IA64_SGI_SN2
to select this option. If in doubt, select ia64 generic support
instead.
+config IA64_SGI_UV`
+ bool "SGI-UV`"
+ select NUMA
+ select ACPI_NUMA
+ select SWIOTLB
+ help
+ Selecting this option will optimize the kernel for use on UV based
+ systems, but the resulting kernel binary will not run on other
+ types of ia64 systems. If you have an SGI UV system, it's safe
+ to select this option. If in doubt, select ia64 generic support
+ instead.
+
config IA64_HP_SIM
bool "Ski-simulator"
select SWIOTLB
diff --git a/arch/ia64/Makefile b/arch/ia64/Makefile
index ec4cca477f49..88f1a55c6c94 100644
--- a/arch/ia64/Makefile
+++ b/arch/ia64/Makefile
@@ -63,7 +63,7 @@ drivers-$(CONFIG_PCI) += arch/ia64/pci/
drivers-$(CONFIG_IA64_HP_SIM) += arch/ia64/hp/sim/
drivers-$(CONFIG_IA64_HP_ZX1) += arch/ia64/hp/common/ arch/ia64/hp/zx1/
drivers-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += arch/ia64/hp/common/ arch/ia64/hp/zx1/
-drivers-$(CONFIG_IA64_GENERIC) += arch/ia64/hp/common/ arch/ia64/hp/zx1/ arch/ia64/hp/sim/ arch/ia64/sn/
+drivers-$(CONFIG_IA64_GENERIC) += arch/ia64/hp/common/ arch/ia64/hp/zx1/ arch/ia64/hp/sim/ arch/ia64/sn/ arch/ia64/uv/
drivers-$(CONFIG_OPROFILE) += arch/ia64/oprofile/
boot := arch/ia64/hp/sim/boot
diff --git a/arch/ia64/ia32/ia32_support.c b/arch/ia64/ia32/ia32_support.c
index 896b1ebbfb26..a6965ddafc46 100644
--- a/arch/ia64/ia32/ia32_support.c
+++ b/arch/ia64/ia32/ia32_support.c
@@ -15,7 +15,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mm.h>
-#include <linux/personality.h>
#include <linux/sched.h>
#include <asm/intrinsics.h>
@@ -29,7 +28,6 @@
extern int die_if_kernel (char *str, struct pt_regs *regs, long err);
-struct exec_domain ia32_exec_domain;
struct page *ia32_shared_page[NR_CPUS];
unsigned long *ia32_boot_gdt;
unsigned long *cpu_gdt_table[NR_CPUS];
@@ -240,14 +238,6 @@ ia32_cpu_init (void)
static int __init
ia32_init (void)
{
- ia32_exec_domain.name = "Linux/x86";
- ia32_exec_domain.handler = NULL;
- ia32_exec_domain.pers_low = PER_LINUX32;
- ia32_exec_domain.pers_high = PER_LINUX32;
- ia32_exec_domain.signal_map = default_exec_domain.signal_map;
- ia32_exec_domain.signal_invmap = default_exec_domain.signal_invmap;
- register_exec_domain(&ia32_exec_domain);
-
#if PAGE_SHIFT > IA32_PAGE_SHIFT
{
extern struct kmem_cache *ia64_partial_page_cachep;
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index 19709a079635..853d1f11be00 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -117,7 +117,10 @@ acpi_get_sysname(void)
if (!strcmp(hdr->oem_id, "HP")) {
return "hpzx1";
} else if (!strcmp(hdr->oem_id, "SGI")) {
- return "sn2";
+ if (!strcmp(hdr->oem_table_id + 4, "UV"))
+ return "uv";
+ else
+ return "sn2";
}
return "dig";
@@ -130,6 +133,8 @@ acpi_get_sysname(void)
return "hpzx1_swiotlb";
# elif defined (CONFIG_IA64_SGI_SN2)
return "sn2";
+# elif defined (CONFIG_IA64_SGI_UV)
+ return "uv";
# elif defined (CONFIG_IA64_DIG)
return "dig";
# else
@@ -622,6 +627,9 @@ void acpi_unregister_gsi(u32 gsi)
if (acpi_irq_model == ACPI_IRQ_MODEL_PLATFORM)
return;
+ if (has_8259 && gsi < 16)
+ return;
+
iosapic_unregister_intr(gsi);
}
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index e49ad8c5dc69..ca2bb95726de 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -1156,6 +1156,9 @@ skip_rbs_switch:
* r31 = current->thread_info->flags
* On exit:
* p6 = TRUE if work-pending-check needs to be redone
+ *
+ * Interrupts are disabled on entry, reenabled depend on work, and
+ * disabled on exit.
*/
.work_pending_syscall:
add r2=-8,r2
@@ -1164,16 +1167,16 @@ skip_rbs_switch:
st8 [r2]=r8
st8 [r3]=r10
.work_pending:
- tbit.z p6,p0=r31,TIF_NEED_RESCHED // current_thread_info()->need_resched==0?
+ tbit.z p6,p0=r31,TIF_NEED_RESCHED // is resched not needed?
(p6) br.cond.sptk.few .notify
#ifdef CONFIG_PREEMPT
(pKStk) dep r21=-1,r0,PREEMPT_ACTIVE_BIT,1
;;
(pKStk) st4 [r20]=r21
- ssm psr.i // enable interrupts
#endif
+ ssm psr.i // enable interrupts
br.call.spnt.many rp=schedule
-.ret9: cmp.eq p6,p0=r0,r0 // p6 <- 1
+.ret9: cmp.eq p6,p0=r0,r0 // p6 <- 1 (re-check)
rsm psr.i // disable interrupts
;;
#ifdef CONFIG_PREEMPT
@@ -1182,13 +1185,13 @@ skip_rbs_switch:
(pKStk) st4 [r20]=r0 // preempt_count() <- 0
#endif
(pLvSys)br.cond.sptk.few .work_pending_syscall_end
- br.cond.sptk.many .work_processed_kernel // re-check
+ br.cond.sptk.many .work_processed_kernel
.notify:
(pUStk) br.call.spnt.many rp=notify_resume_user
-.ret10: cmp.ne p6,p0=r0,r0 // p6 <- 0
+.ret10: cmp.ne p6,p0=r0,r0 // p6 <- 0 (don't re-check)
(pLvSys)br.cond.sptk.few .work_pending_syscall_end
- br.cond.sptk.many .work_processed_kernel // don't re-check
+ br.cond.sptk.many .work_processed_kernel
.work_pending_syscall_end:
adds r2=PT(R8)+16,r12
@@ -1196,7 +1199,7 @@ skip_rbs_switch:
;;
ld8 r8=[r2]
ld8 r10=[r3]
- br.cond.sptk.many .work_processed_syscall // re-check
+ br.cond.sptk.many .work_processed_syscall
END(ia64_leave_kernel)
@@ -1234,9 +1237,12 @@ GLOBAL_ENTRY(ia64_invoke_schedule_tail)
END(ia64_invoke_schedule_tail)
/*
- * Setup stack and call do_notify_resume_user(). Note that pSys and pNonSys need to
- * be set up by the caller. We declare 8 input registers so the system call
- * args get preserved, in case we need to restart a system call.
+ * Setup stack and call do_notify_resume_user(), keeping interrupts
+ * disabled.
+ *
+ * Note that pSys and pNonSys need to be set up by the caller.
+ * We declare 8 input registers so the system call args get preserved,
+ * in case we need to restart a system call.
*/
ENTRY(notify_resume_user)
.prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(8)
diff --git a/arch/ia64/kernel/palinfo.c b/arch/ia64/kernel/palinfo.c
index 4547a2092af9..9dc00f7fe10e 100644
--- a/arch/ia64/kernel/palinfo.c
+++ b/arch/ia64/kernel/palinfo.c
@@ -900,12 +900,6 @@ static void
palinfo_smp_call(void *info)
{
palinfo_smp_data_t *data = (palinfo_smp_data_t *)info;
- if (data == NULL) {
- printk(KERN_ERR "palinfo: data pointer is NULL\n");
- data->ret = 0; /* no output */
- return;
- }
- /* does this actual call */
data->ret = (*data->func)(data->page);
}
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index c1ad27de2dd2..71d05133f556 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -5013,12 +5013,13 @@ pfm_context_force_terminate(pfm_context_t *ctx, struct pt_regs *regs)
}
static int pfm_ovfl_notify_user(pfm_context_t *ctx, unsigned long ovfl_pmds);
+
/*
* pfm_handle_work() can be called with interrupts enabled
* (TIF_NEED_RESCHED) or disabled. The down_interruptible
* call may sleep, therefore we must re-enable interrupts
* to avoid deadlocks. It is safe to do so because this function
- * is called ONLY when returning to user level (PUStk=1), in which case
+ * is called ONLY when returning to user level (pUStk=1), in which case
* there is no risk of kernel stack overflow due to deep
* interrupt nesting.
*/
@@ -5034,7 +5035,8 @@ pfm_handle_work(void)
ctx = PFM_GET_CTX(current);
if (ctx == NULL) {
- printk(KERN_ERR "perfmon: [%d] has no PFM context\n", task_pid_nr(current));
+ printk(KERN_ERR "perfmon: [%d] has no PFM context\n",
+ task_pid_nr(current));
return;
}
@@ -5058,11 +5060,12 @@ pfm_handle_work(void)
/*
* must be done before we check for simple-reset mode
*/
- if (ctx->ctx_fl_going_zombie || ctx->ctx_state == PFM_CTX_ZOMBIE) goto do_zombie;
-
+ if (ctx->ctx_fl_going_zombie || ctx->ctx_state == PFM_CTX_ZOMBIE)
+ goto do_zombie;
//if (CTX_OVFL_NOBLOCK(ctx)) goto skip_blocking;
- if (reason == PFM_TRAP_REASON_RESET) goto skip_blocking;
+ if (reason == PFM_TRAP_REASON_RESET)
+ goto skip_blocking;
/*
* restore interrupt mask to what it was on entry.
@@ -5110,7 +5113,8 @@ do_zombie:
/*
* in case of interruption of down() we don't restart anything
*/
- if (ret < 0) goto nothing_to_do;
+ if (ret < 0)
+ goto nothing_to_do;
skip_blocking:
pfm_resume_after_ovfl(ctx, ovfl_regs, regs);
diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c
index 58dcfac5ea88..a3a34b4eb038 100644
--- a/arch/ia64/kernel/process.c
+++ b/arch/ia64/kernel/process.c
@@ -167,11 +167,18 @@ void tsk_clear_notify_resume(struct task_struct *tsk)
clear_ti_thread_flag(task_thread_info(tsk), TIF_NOTIFY_RESUME);
}
+/*
+ * do_notify_resume_user():
+ * Called from notify_resume_user at entry.S, with interrupts disabled.
+ */
void
-do_notify_resume_user (sigset_t *unused, struct sigscratch *scr, long in_syscall)
+do_notify_resume_user(sigset_t *unused, struct sigscratch *scr, long in_syscall)
{
if (fsys_mode(current, &scr->pt)) {
- /* defer signal-handling etc. until we return to privilege-level 0. */
+ /*
+ * defer signal-handling etc. until we return to
+ * privilege-level 0.
+ */
if (!ia64_psr(&scr->pt)->lp)
ia64_psr(&scr->pt)->lp = 1;
return;
@@ -179,16 +186,26 @@ do_notify_resume_user (sigset_t *unused, struct sigscratch *scr, long in_syscall
#ifdef CONFIG_PERFMON
if (current->thread.pfm_needs_checking)
+ /*
+ * Note: pfm_handle_work() allow us to call it with interrupts
+ * disabled, and may enable interrupts within the function.
+ */
pfm_handle_work();
#endif
/* deal with pending signal delivery */
- if (test_thread_flag(TIF_SIGPENDING))
+ if (test_thread_flag(TIF_SIGPENDING)) {
+ local_irq_enable(); /* force interrupt enable */
ia64_do_signal(scr, in_syscall);
+ }
/* copy user rbs to kernel rbs */
- if (unlikely(test_thread_flag(TIF_RESTORE_RSE)))
+ if (unlikely(test_thread_flag(TIF_RESTORE_RSE))) {
+ local_irq_enable(); /* force interrupt enable */
ia64_sync_krbs();
+ }
+
+ local_irq_disable(); /* force interrupt disable */
}
static int pal_halt = 1;
diff --git a/arch/ia64/kernel/sal.c b/arch/ia64/kernel/sal.c
index a3022dc48ef8..7e0259709c04 100644
--- a/arch/ia64/kernel/sal.c
+++ b/arch/ia64/kernel/sal.c
@@ -229,6 +229,14 @@ static void __init sal_desc_ap_wakeup(void *p) { }
*/
static int sal_cache_flush_drops_interrupts;
+static int __init
+force_pal_cache_flush(char *str)
+{
+ sal_cache_flush_drops_interrupts = 1;
+ return 0;
+}
+early_param("force_pal_cache_flush", force_pal_cache_flush);
+
void __init
check_sal_cache_flush (void)
{
@@ -237,6 +245,9 @@ check_sal_cache_flush (void)
u64 vector, cache_type = 3;
struct ia64_sal_retval isrv;
+ if (sal_cache_flush_drops_interrupts)
+ return;
+
cpu = get_cpu();
local_irq_save(flags);
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index 5015ca1275ca..e9596cd0cdab 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -239,6 +239,25 @@ __initcall(register_memory);
#ifdef CONFIG_KEXEC
+
+/*
+ * This function checks if the reserved crashkernel is allowed on the specific
+ * IA64 machine flavour. Machines without an IO TLB use swiotlb and require
+ * some memory below 4 GB (i.e. in 32 bit area), see the implementation of
+ * lib/swiotlb.c. The hpzx1 architecture has an IO TLB but cannot use that
+ * in kdump case. See the comment in sba_init() in sba_iommu.c.
+ *
+ * So, the only machvec that really supports loading the kdump kernel
+ * over 4 GB is "sn2".
+ */
+static int __init check_crashkernel_memory(unsigned long pbase, size_t size)
+{
+ if (ia64_platform_is("sn2") || ia64_platform_is("uv"))
+ return 1;
+ else
+ return pbase < (1UL << 32);
+}
+
static void __init setup_crashkernel(unsigned long total, int *n)
{
unsigned long long base = 0, size = 0;
@@ -252,6 +271,16 @@ static void __init setup_crashkernel(unsigned long total, int *n)
base = kdump_find_rsvd_region(size,
rsvd_region, *n);
}
+
+ if (!check_crashkernel_memory(base, size)) {
+ pr_warning("crashkernel: There would be kdump memory "
+ "at %ld GB but this is unusable because it "
+ "must\nbe below 4 GB. Change the memory "
+ "configuration of the machine.\n",
+ (unsigned long)(base >> 30));
+ return;
+ }
+
if (base != ~0UL) {
printk(KERN_INFO "Reserving %ldMB of memory at %ldMB "
"for crashkernel (System RAM: %ldMB)\n",
diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c
index fc6c6636ffda..200100ea7610 100644
--- a/arch/ia64/mm/init.c
+++ b/arch/ia64/mm/init.c
@@ -719,3 +719,28 @@ out:
EXPORT_SYMBOL_GPL(remove_memory);
#endif /* CONFIG_MEMORY_HOTREMOVE */
#endif
+
+/*
+ * Even when CONFIG_IA32_SUPPORT is not enabled it is
+ * useful to have the Linux/x86 domain registered to
+ * avoid an attempted module load when emulators call
+ * personality(PER_LINUX32). This saves several milliseconds
+ * on each such call.
+ */
+static struct exec_domain ia32_exec_domain;
+
+static int __init
+per_linux32_init(void)
+{
+ ia32_exec_domain.name = "Linux/x86";
+ ia32_exec_domain.handler = NULL;
+ ia32_exec_domain.pers_low = PER_LINUX32;
+ ia32_exec_domain.pers_high = PER_LINUX32;
+ ia32_exec_domain.signal_map = default_exec_domain.signal_map;
+ ia32_exec_domain.signal_invmap = default_exec_domain.signal_invmap;
+ register_exec_domain(&ia32_exec_domain);
+
+ return 0;
+}
+
+__initcall(per_linux32_init);
diff --git a/arch/ia64/uv/Makefile b/arch/ia64/uv/Makefile
new file mode 100644
index 000000000000..aa9f91947c49
--- /dev/null
+++ b/arch/ia64/uv/Makefile
@@ -0,0 +1,12 @@
+# arch/ia64/uv/Makefile
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2008 Silicon Graphics, Inc. All Rights Reserved.
+#
+# Makefile for the sn uv subplatform
+#
+
+obj-y += kernel/
diff --git a/arch/ia64/uv/kernel/Makefile b/arch/ia64/uv/kernel/Makefile
new file mode 100644
index 000000000000..8d92b4684d8e
--- /dev/null
+++ b/arch/ia64/uv/kernel/Makefile
@@ -0,0 +1,13 @@
+# arch/ia64/uv/kernel/Makefile
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2008 Silicon Graphics, Inc. All Rights Reserved.
+#
+
+EXTRA_CFLAGS += -Iarch/ia64/sn/include
+
+obj-y += setup.o
+obj-$(CONFIG_IA64_GENERIC) += machvec.o
diff --git a/arch/ia64/uv/kernel/machvec.c b/arch/ia64/uv/kernel/machvec.c
new file mode 100644
index 000000000000..50737a9dca74
--- /dev/null
+++ b/arch/ia64/uv/kernel/machvec.c
@@ -0,0 +1,11 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved.
+ */
+
+#define MACHVEC_PLATFORM_NAME uv
+#define MACHVEC_PLATFORM_HEADER <asm/machvec_uv.h>
+#include <asm/machvec_init.h>
diff --git a/arch/ia64/uv/kernel/setup.c b/arch/ia64/uv/kernel/setup.c
new file mode 100644
index 000000000000..9aa743203c3c
--- /dev/null
+++ b/arch/ia64/uv/kernel/setup.c
@@ -0,0 +1,98 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI UV Core Functions
+ *
+ * Copyright (C) 2008 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#include <linux/module.h>
+#include <linux/percpu.h>
+#include <asm/sn/simulator.h>
+#include <asm/uv/uv_mmrs.h>
+#include <asm/uv/uv_hub.h>
+
+DEFINE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
+EXPORT_PER_CPU_SYMBOL_GPL(__uv_hub_info);
+
+
+struct redir_addr {
+ unsigned long redirect;
+ unsigned long alias;
+};
+
+#define DEST_SHIFT UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_SHFT
+
+static __initdata struct redir_addr redir_addrs[] = {
+ {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR, UVH_SI_ALIAS0_OVERLAY_CONFIG},
+ {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR, UVH_SI_ALIAS1_OVERLAY_CONFIG},
+ {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR, UVH_SI_ALIAS2_OVERLAY_CONFIG},
+};
+
+static __init void get_lowmem_redirect(unsigned long *base, unsigned long *size)
+{
+ union uvh_si_alias0_overlay_config_u alias;
+ union uvh_rh_gam_alias210_redirect_config_2_mmr_u redirect;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(redir_addrs); i++) {
+ alias.v = uv_read_local_mmr(redir_addrs[i].alias);
+ if (alias.s.base == 0) {
+ *size = (1UL << alias.s.m_alias);
+ redirect.v = uv_read_local_mmr(redir_addrs[i].redirect);
+ *base = (unsigned long)redirect.s.dest_base << DEST_SHIFT;
+ return;
+ }
+ }
+ BUG();
+}
+
+void __init uv_setup(char **cmdline_p)
+{
+ union uvh_si_addr_map_config_u m_n_config;
+ union uvh_node_id_u node_id;
+ unsigned long gnode_upper;
+ int nid, cpu, m_val, n_val;
+ unsigned long mmr_base, lowmem_redir_base, lowmem_redir_size;
+
+ if (IS_MEDUSA()) {
+ lowmem_redir_base = 0;
+ lowmem_redir_size = 0;
+ node_id.v = 0;
+ m_n_config.s.m_skt = 37;
+ m_n_config.s.n_skt = 0;
+ mmr_base = 0;
+ } else {
+ get_lowmem_redirect(&lowmem_redir_base, &lowmem_redir_size);
+ node_id.v = uv_read_local_mmr(UVH_NODE_ID);
+ m_n_config.v = uv_read_local_mmr(UVH_SI_ADDR_MAP_CONFIG);
+ mmr_base =
+ uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR) &
+ ~UV_MMR_ENABLE;
+ }
+
+ m_val = m_n_config.s.m_skt;
+ n_val = m_n_config.s.n_skt;
+ printk(KERN_DEBUG "UV: global MMR base 0x%lx\n", mmr_base);
+
+ gnode_upper = (((unsigned long)node_id.s.node_id) &
+ ~((1 << n_val) - 1)) << m_val;
+
+ for_each_present_cpu(cpu) {
+ nid = cpu_to_node(cpu);
+ uv_cpu_hub_info(cpu)->lowmem_remap_base = lowmem_redir_base;
+ uv_cpu_hub_info(cpu)->lowmem_remap_top =
+ lowmem_redir_base + lowmem_redir_size;
+ uv_cpu_hub_info(cpu)->m_val = m_val;
+ uv_cpu_hub_info(cpu)->n_val = m_val;
+ uv_cpu_hub_info(cpu)->pnode_mask = (1 << n_val) -1;
+ uv_cpu_hub_info(cpu)->gpa_mask = (1 << (m_val + n_val)) - 1;
+ uv_cpu_hub_info(cpu)->gnode_upper = gnode_upper;
+ uv_cpu_hub_info(cpu)->global_mmr_base = mmr_base;
+ uv_cpu_hub_info(cpu)->coherency_domain_number = 0;/* ZZZ */
+ printk(KERN_DEBUG "UV cpu %d, nid %d\n", cpu, nid);
+ }
+}
+
diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig
index 07eb4c4bab82..8e8441587c22 100644
--- a/arch/m68knommu/Kconfig
+++ b/arch/m68knommu/Kconfig
@@ -671,6 +671,9 @@ config ROMKERNEL
endchoice
+if COLDFIRE
+source "kernel/Kconfig.preempt"
+endif
source "mm/Kconfig"
endmenu
diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S
index 5592e0bf951f..93e69236ed6f 100644
--- a/arch/m68knommu/kernel/vmlinux.lds.S
+++ b/arch/m68knommu/kernel/vmlinux.lds.S
@@ -114,6 +114,16 @@ SECTIONS {
*(__kcrctab_gpl)
__stop___kcrctab_gpl = .;
+ /* Kernel symbol table: Normal unused symbols */
+ __start___kcrctab_unused = .;
+ *(__kcrctab_unused)
+ __stop___kcrctab_unused = .;
+
+ /* Kernel symbol table: GPL-only unused symbols */
+ __start___kcrctab_unused_gpl = .;
+ *(__kcrctab_unused_gpl)
+ __stop___kcrctab_unused_gpl = .;
+
/* Kernel symbol table: GPL-future symbols */
__start___kcrctab_gpl_future = .;
*(__kcrctab_gpl_future)
diff --git a/arch/mips/au1000/common/Makefile b/arch/mips/au1000/common/Makefile
index 90e2d7a46e8e..dd0e19dacfcf 100644
--- a/arch/mips/au1000/common/Makefile
+++ b/arch/mips/au1000/common/Makefile
@@ -1,9 +1,8 @@
#
-# Copyright 2000 MontaVista Software Inc.
-# Author: MontaVista Software, Inc.
-# ppopov@mvista.com or source@mvista.com
+# Copyright 2000, 2008 MontaVista Software Inc.
+# Author: MontaVista Software, Inc. <source@mvista.com>
#
-# Makefile for the Alchemy Au1000 CPU, generic files.
+# Makefile for the Alchemy Au1xx0 CPUs, generic files.
#
obj-y += prom.o irq.o puts.o time.o reset.o \
diff --git a/arch/mips/au1000/common/au1xxx_irqmap.c b/arch/mips/au1000/common/au1xxx_irqmap.c
index 37a10a01de9d..c7ca1596394c 100644
--- a/arch/mips/au1000/common/au1xxx_irqmap.c
+++ b/arch/mips/au1000/common/au1xxx_irqmap.c
@@ -40,20 +40,20 @@
struct au1xxx_irqmap __initdata au1xxx_ic0_map[] = {
#if defined(CONFIG_SOC_AU1000)
- { AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_UART1_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_UART2_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0},
+ { AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_UART1_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_UART2_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_UART3_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
@@ -62,32 +62,32 @@ struct au1xxx_irqmap __initdata au1xxx_ic0_map[] = {
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
#elif defined(CONFIG_SOC_AU1500)
- { AU1500_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1500_UART0_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_PCI_INTA, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTB, INTC_INT_LOW_LEVEL, 0 },
- { AU1500_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1500_UART3_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_PCI_INTC, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTD, INTC_INT_LOW_LEVEL, 0 },
- { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0},
+ { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
@@ -100,26 +100,26 @@ struct au1xxx_irqmap __initdata au1xxx_ic0_map[] = {
{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1500_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1500_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1500_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1500_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
#elif defined(CONFIG_SOC_AU1100)
- { AU1100_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1100_UART1_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1100_SD_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1100_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0},
+ { AU1100_UART0_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1100_UART1_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1100_SD_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1100_UART3_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
@@ -128,33 +128,33 @@ struct au1xxx_irqmap __initdata au1xxx_ic0_map[] = {
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1100_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
- /*{ AU1000_GPIO215_208_INT, INTC_INT_HIGH_LEVEL, 0},*/
- { AU1100_LCD_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1100_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
+ /* { AU1000_GPIO215_208_INT, INTC_INT_HIGH_LEVEL, 0 }, */
+ { AU1100_LCD_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
#elif defined(CONFIG_SOC_AU1550)
- { AU1550_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1550_UART0_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1550_PCI_INTA, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_PCI_INTB, INTC_INT_LOW_LEVEL, 0 },
- { AU1550_DDMA_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1550_CRYPTO_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1550_DDMA_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1550_CRYPTO_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1550_PCI_INTC, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_PCI_INTD, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_PCI_RST_INT, INTC_INT_LOW_LEVEL, 0 },
- { AU1550_UART1_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1550_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1550_PSC0_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1550_PSC1_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1550_PSC2_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1550_PSC3_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1550_UART1_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1550_UART3_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1550_PSC0_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1550_PSC1_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1550_PSC2_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1550_PSC3_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
@@ -163,26 +163,26 @@ struct au1xxx_irqmap __initdata au1xxx_ic0_map[] = {
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1550_NAND_INT, INTC_INT_RISE_EDGE, 0},
+ { AU1550_NAND_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1550_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
- { AU1550_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1550_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1550_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1550_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
#elif defined(CONFIG_SOC_AU1200)
- { AU1200_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1200_UART0_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1200_SWT_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1200_SD_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1200_DDMA_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1200_SD_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1200_DDMA_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1200_MAE_BE_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1200_UART1_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1200_UART1_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1200_MAE_FE_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1200_PSC0_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1200_PSC1_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1200_AES_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1200_CAMERA_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1200_PSC0_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1200_PSC1_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1200_AES_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1200_CAMERA_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
@@ -191,10 +191,10 @@ struct au1xxx_irqmap __initdata au1xxx_ic0_map[] = {
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1200_NAND_INT, INTC_INT_RISE_EDGE, 0},
+ { AU1200_NAND_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1200_USB_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1200_LCD_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1200_MAE_BOTH_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1200_LCD_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1200_MAE_BOTH_INT, INTC_INT_HIGH_LEVEL, 0 },
#else
#error "Error: Unknown Alchemy SOC"
@@ -203,4 +203,3 @@ struct au1xxx_irqmap __initdata au1xxx_ic0_map[] = {
};
int __initdata au1xxx_ic0_nr_irqs = ARRAY_SIZE(au1xxx_ic0_map);
-
diff --git a/arch/mips/au1000/common/clocks.c b/arch/mips/au1000/common/clocks.c
index 3ce6cace0eb0..46f8ee0e2657 100644
--- a/arch/mips/au1000/common/clocks.c
+++ b/arch/mips/au1000/common/clocks.c
@@ -1,10 +1,9 @@
/*
* BRIEF MODULE DESCRIPTION
- * Simple Au1000 clocks routines.
+ * Simple Au1xx0 clocks routines.
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -30,8 +29,8 @@
#include <linux/module.h>
#include <asm/mach-au1x00/au1000.h>
-static unsigned int au1x00_clock; // Hz
-static unsigned int lcd_clock; // KHz
+static unsigned int au1x00_clock; /* Hz */
+static unsigned int lcd_clock; /* KHz */
static unsigned long uart_baud_base;
/*
@@ -47,8 +46,6 @@ unsigned int get_au1x00_speed(void)
return au1x00_clock;
}
-
-
/*
* The UART baud base is not known at compile time ... if
* we want to be able to use the same code on different
@@ -73,24 +70,23 @@ void set_au1x00_uart_baud_base(unsigned long new_baud_base)
void set_au1x00_lcd_clock(void)
{
unsigned int static_cfg0;
- unsigned int sys_busclk =
- (get_au1x00_speed()/1000) /
- ((int)(au_readl(SYS_POWERCTRL)&0x03) + 2);
+ unsigned int sys_busclk = (get_au1x00_speed() / 1000) /
+ ((int)(au_readl(SYS_POWERCTRL) & 0x03) + 2);
static_cfg0 = au_readl(MEM_STCFG0);
- if (static_cfg0 & (1<<11))
+ if (static_cfg0 & (1 << 11))
lcd_clock = sys_busclk / 5; /* note: BCLK switching fails with D5 */
else
lcd_clock = sys_busclk / 4;
if (lcd_clock > 50000) /* Epson MAX */
- printk("warning: LCD clock too high (%d KHz)\n", lcd_clock);
+ printk(KERN_WARNING "warning: LCD clock too high (%u KHz)\n",
+ lcd_clock);
}
unsigned int get_au1x00_lcd_clock(void)
{
return lcd_clock;
}
-
EXPORT_SYMBOL(get_au1x00_lcd_clock);
diff --git a/arch/mips/au1000/common/cputable.c b/arch/mips/au1000/common/cputable.c
index 8c93a05d7382..ba6430bc2d03 100644
--- a/arch/mips/au1000/common/cputable.c
+++ b/arch/mips/au1000/common/cputable.c
@@ -14,7 +14,7 @@
#include <asm/mach-au1x00/au1000.h>
-struct cpu_spec* cur_cpu_spec[NR_CPUS];
+struct cpu_spec *cur_cpu_spec[NR_CPUS];
/* With some thought, we can probably use the mask to reduce the
* size of the table.
@@ -39,8 +39,7 @@ struct cpu_spec cpu_specs[] = {
{ 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0, 0 }
};
-void
-set_cpuspec(void)
+void set_cpuspec(void)
{
struct cpu_spec *sp;
u32 prid;
diff --git a/arch/mips/au1000/common/dbdma.c b/arch/mips/au1000/common/dbdma.c
index 53377dfc0640..42d555236de1 100644
--- a/arch/mips/au1000/common/dbdma.c
+++ b/arch/mips/au1000/common/dbdma.c
@@ -53,12 +53,11 @@
*/
static DEFINE_SPINLOCK(au1xxx_dbdma_spin_lock);
-/* I couldn't find a macro that did this......
-*/
+/* I couldn't find a macro that did this... */
#define ALIGN_ADDR(x, a) ((((u32)(x)) + (a-1)) & ~(a-1))
static dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE;
-static int dbdma_initialized=0;
+static int dbdma_initialized;
static void au1xxx_dbdma_init(void);
static dbdev_tab_t dbdev_tab[] = {
@@ -149,7 +148,7 @@ static dbdev_tab_t dbdev_tab[] = {
{ DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
-#endif // CONFIG_SOC_AU1200
+#endif /* CONFIG_SOC_AU1200 */
{ DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
{ DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
@@ -177,8 +176,7 @@ static dbdev_tab_t dbdev_tab[] = {
static chan_tab_t *chan_tab_ptr[NUM_DBDMA_CHANS];
-static dbdev_tab_t *
-find_dbdev_id(u32 id)
+static dbdev_tab_t *find_dbdev_id(u32 id)
{
int i;
dbdev_tab_t *p;
@@ -190,29 +188,27 @@ find_dbdev_id(u32 id)
return NULL;
}
-void * au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp)
+void *au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp)
{
- return phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
+ return phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
}
EXPORT_SYMBOL(au1xxx_ddma_get_nextptr_virt);
-u32
-au1xxx_ddma_add_device(dbdev_tab_t *dev)
+u32 au1xxx_ddma_add_device(dbdev_tab_t *dev)
{
u32 ret = 0;
- dbdev_tab_t *p=NULL;
- static u16 new_id=0x1000;
+ dbdev_tab_t *p;
+ static u16 new_id = 0x1000;
p = find_dbdev_id(~0);
- if ( NULL != p )
- {
+ if (NULL != p) {
memcpy(p, dev, sizeof(dbdev_tab_t));
p->dev_id = DSCR_DEV2CUSTOM_ID(new_id, dev->dev_id);
ret = p->dev_id;
new_id++;
#if 0
- printk("add_device: id:%x flags:%x padd:%x\n",
- p->dev_id, p->dev_flags, p->dev_physaddr );
+ printk(KERN_DEBUG "add_device: id:%x flags:%x padd:%x\n",
+ p->dev_id, p->dev_flags, p->dev_physaddr);
#endif
}
@@ -220,10 +216,8 @@ au1xxx_ddma_add_device(dbdev_tab_t *dev)
}
EXPORT_SYMBOL(au1xxx_ddma_add_device);
-/* Allocate a channel and return a non-zero descriptor if successful.
-*/
-u32
-au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
+/* Allocate a channel and return a non-zero descriptor if successful. */
+u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
void (*callback)(int, void *), void *callparam)
{
unsigned long flags;
@@ -234,7 +228,8 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
chan_tab_t *ctp;
au1x_dma_chan_t *cp;
- /* We do the intialization on the first channel allocation.
+ /*
+ * We do the intialization on the first channel allocation.
* We have to wait because of the interrupt handler initialization
* which can't be done successfully during board set up.
*/
@@ -242,16 +237,17 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
au1xxx_dbdma_init();
dbdma_initialized = 1;
- if ((stp = find_dbdev_id(srcid)) == NULL)
+ stp = find_dbdev_id(srcid);
+ if (stp == NULL)
return 0;
- if ((dtp = find_dbdev_id(destid)) == NULL)
+ dtp = find_dbdev_id(destid);
+ if (dtp == NULL)
return 0;
used = 0;
rv = 0;
- /* Check to see if we can get both channels.
- */
+ /* Check to see if we can get both channels. */
spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags);
if (!(stp->dev_flags & DEV_FLAGS_INUSE) ||
(stp->dev_flags & DEV_FLAGS_ANYUSE)) {
@@ -261,35 +257,30 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
(dtp->dev_flags & DEV_FLAGS_ANYUSE)) {
/* Got destination */
dtp->dev_flags |= DEV_FLAGS_INUSE;
- }
- else {
- /* Can't get dest. Release src.
- */
+ } else {
+ /* Can't get dest. Release src. */
stp->dev_flags &= ~DEV_FLAGS_INUSE;
used++;
}
- }
- else {
+ } else
used++;
- }
spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags);
if (!used) {
- /* Let's see if we can allocate a channel for it.
- */
+ /* Let's see if we can allocate a channel for it. */
ctp = NULL;
chan = 0;
spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags);
- for (i=0; i<NUM_DBDMA_CHANS; i++) {
+ for (i = 0; i < NUM_DBDMA_CHANS; i++)
if (chan_tab_ptr[i] == NULL) {
- /* If kmalloc fails, it is caught below same
+ /*
+ * If kmalloc fails, it is caught below same
* as a channel not available.
*/
ctp = kmalloc(sizeof(chan_tab_t), GFP_ATOMIC);
chan_tab_ptr[i] = ctp;
break;
}
- }
spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags);
if (ctp != NULL) {
@@ -304,8 +295,7 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
ctp->chan_callback = callback;
ctp->chan_callparam = callparam;
- /* Initialize channel configuration.
- */
+ /* Initialize channel configuration. */
i = 0;
if (stp->dev_intlevel)
i |= DDMA_CFG_SED;
@@ -326,8 +316,7 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
* operations.
*/
rv = (u32)(&chan_tab_ptr[chan]);
- }
- else {
+ } else {
/* Release devices */
stp->dev_flags &= ~DEV_FLAGS_INUSE;
dtp->dev_flags &= ~DEV_FLAGS_INUSE;
@@ -337,11 +326,11 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
}
EXPORT_SYMBOL(au1xxx_dbdma_chan_alloc);
-/* Set the device width if source or destination is a FIFO.
+/*
+ * Set the device width if source or destination is a FIFO.
* Should be 8, 16, or 32 bits.
*/
-u32
-au1xxx_dbdma_set_devwidth(u32 chanid, int bits)
+u32 au1xxx_dbdma_set_devwidth(u32 chanid, int bits)
{
u32 rv;
chan_tab_t *ctp;
@@ -365,10 +354,8 @@ au1xxx_dbdma_set_devwidth(u32 chanid, int bits)
}
EXPORT_SYMBOL(au1xxx_dbdma_set_devwidth);
-/* Allocate a descriptor ring, initializing as much as possible.
-*/
-u32
-au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
+/* Allocate a descriptor ring, initializing as much as possible. */
+u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
{
int i;
u32 desc_base, srcid, destid;
@@ -378,43 +365,45 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
dbdev_tab_t *stp, *dtp;
au1x_ddma_desc_t *dp;
- /* I guess we could check this to be within the
+ /*
+ * I guess we could check this to be within the
* range of the table......
*/
ctp = *((chan_tab_t **)chanid);
stp = ctp->chan_src;
dtp = ctp->chan_dest;
- /* The descriptors must be 32-byte aligned. There is a
+ /*
+ * The descriptors must be 32-byte aligned. There is a
* possibility the allocation will give us such an address,
* and if we try that first we are likely to not waste larger
* slabs of memory.
*/
desc_base = (u32)kmalloc(entries * sizeof(au1x_ddma_desc_t),
- GFP_KERNEL|GFP_DMA);
+ GFP_KERNEL|GFP_DMA);
if (desc_base == 0)
return 0;
if (desc_base & 0x1f) {
- /* Lost....do it again, allocate extra, and round
+ /*
+ * Lost....do it again, allocate extra, and round
* the address base.
*/
kfree((const void *)desc_base);
i = entries * sizeof(au1x_ddma_desc_t);
i += (sizeof(au1x_ddma_desc_t) - 1);
- if ((desc_base = (u32)kmalloc(i, GFP_KERNEL|GFP_DMA)) == 0)
+ desc_base = (u32)kmalloc(i, GFP_KERNEL|GFP_DMA);
+ if (desc_base == 0)
return 0;
desc_base = ALIGN_ADDR(desc_base, sizeof(au1x_ddma_desc_t));
}
dp = (au1x_ddma_desc_t *)desc_base;
- /* Keep track of the base descriptor.
- */
+ /* Keep track of the base descriptor. */
ctp->chan_desc_base = dp;
- /* Initialize the rings with as much information as we know.
- */
+ /* Initialize the rings with as much information as we know. */
srcid = stp->dev_id;
destid = dtp->dev_id;
@@ -426,11 +415,12 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
cmd0 |= DSCR_CMD0_IE | DSCR_CMD0_CV;
cmd0 |= DSCR_CMD0_ST(DSCR_CMD0_ST_NOCHANGE);
- /* is it mem to mem transfer? */
- if(((DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_THROTTLE) || (DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_ALWAYS)) &&
- ((DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_THROTTLE) || (DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_ALWAYS))) {
- cmd0 |= DSCR_CMD0_MEM;
- }
+ /* Is it mem to mem transfer? */
+ if (((DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_THROTTLE) ||
+ (DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_ALWAYS)) &&
+ ((DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_THROTTLE) ||
+ (DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_ALWAYS)))
+ cmd0 |= DSCR_CMD0_MEM;
switch (stp->dev_devwidth) {
case 8:
@@ -458,15 +448,17 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
break;
}
- /* If the device is marked as an in/out FIFO, ensure it is
+ /*
+ * If the device is marked as an in/out FIFO, ensure it is
* set non-coherent.
*/
if (stp->dev_flags & DEV_FLAGS_IN)
- cmd0 |= DSCR_CMD0_SN; /* Source in fifo */
+ cmd0 |= DSCR_CMD0_SN; /* Source in FIFO */
if (dtp->dev_flags & DEV_FLAGS_OUT)
- cmd0 |= DSCR_CMD0_DN; /* Destination out fifo */
+ cmd0 |= DSCR_CMD0_DN; /* Destination out FIFO */
- /* Set up source1. For now, assume no stride and increment.
+ /*
+ * Set up source1. For now, assume no stride and increment.
* A channel attribute update can change this later.
*/
switch (stp->dev_tsize) {
@@ -485,19 +477,19 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
break;
}
- /* If source input is fifo, set static address.
- */
+ /* If source input is FIFO, set static address. */
if (stp->dev_flags & DEV_FLAGS_IN) {
- if ( stp->dev_flags & DEV_FLAGS_BURSTABLE )
+ if (stp->dev_flags & DEV_FLAGS_BURSTABLE)
src1 |= DSCR_SRC1_SAM(DSCR_xAM_BURST);
else
- src1 |= DSCR_SRC1_SAM(DSCR_xAM_STATIC);
-
+ src1 |= DSCR_SRC1_SAM(DSCR_xAM_STATIC);
}
+
if (stp->dev_physaddr)
src0 = stp->dev_physaddr;
- /* Set up dest1. For now, assume no stride and increment.
+ /*
+ * Set up dest1. For now, assume no stride and increment.
* A channel attribute update can change this later.
*/
switch (dtp->dev_tsize) {
@@ -516,22 +508,24 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
break;
}
- /* If destination output is fifo, set static address.
- */
+ /* If destination output is FIFO, set static address. */
if (dtp->dev_flags & DEV_FLAGS_OUT) {
- if ( dtp->dev_flags & DEV_FLAGS_BURSTABLE )
- dest1 |= DSCR_DEST1_DAM(DSCR_xAM_BURST);
- else
- dest1 |= DSCR_DEST1_DAM(DSCR_xAM_STATIC);
+ if (dtp->dev_flags & DEV_FLAGS_BURSTABLE)
+ dest1 |= DSCR_DEST1_DAM(DSCR_xAM_BURST);
+ else
+ dest1 |= DSCR_DEST1_DAM(DSCR_xAM_STATIC);
}
+
if (dtp->dev_physaddr)
dest0 = dtp->dev_physaddr;
#if 0
- printk("did:%x sid:%x cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n",
- dtp->dev_id, stp->dev_id, cmd0, cmd1, src0, src1, dest0, dest1 );
+ printk(KERN_DEBUG "did:%x sid:%x cmd0:%x cmd1:%x source0:%x "
+ "source1:%x dest0:%x dest1:%x\n",
+ dtp->dev_id, stp->dev_id, cmd0, cmd1, src0,
+ src1, dest0, dest1);
#endif
- for (i=0; i<entries; i++) {
+ for (i = 0; i < entries; i++) {
dp->dscr_cmd0 = cmd0;
dp->dscr_cmd1 = cmd1;
dp->dscr_source0 = src0;
@@ -545,49 +539,49 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
dp++;
}
- /* Make last descrptor point to the first.
- */
+ /* Make last descrptor point to the first. */
dp--;
dp->dscr_nxtptr = DSCR_NXTPTR(virt_to_phys(ctp->chan_desc_base));
ctp->get_ptr = ctp->put_ptr = ctp->cur_ptr = ctp->chan_desc_base;
- return (u32)(ctp->chan_desc_base);
+ return (u32)ctp->chan_desc_base;
}
EXPORT_SYMBOL(au1xxx_dbdma_ring_alloc);
-/* Put a source buffer into the DMA ring.
+/*
+ * Put a source buffer into the DMA ring.
* This updates the source pointer and byte count. Normally used
* for memory to fifo transfers.
*/
-u32
-_au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags)
+u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags)
{
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
- /* I guess we could check this to be within the
+ /*
+ * I guess we could check this to be within the
* range of the table......
*/
- ctp = *((chan_tab_t **)chanid);
+ ctp = *(chan_tab_t **)chanid;
- /* We should have multiple callers for a particular channel,
+ /*
+ * We should have multiple callers for a particular channel,
* an interrupt doesn't affect this pointer nor the descriptor,
* so no locking should be needed.
*/
dp = ctp->put_ptr;
- /* If the descriptor is valid, we are way ahead of the DMA
+ /*
+ * If the descriptor is valid, we are way ahead of the DMA
* engine, so just return an error condition.
*/
- if (dp->dscr_cmd0 & DSCR_CMD0_V) {
+ if (dp->dscr_cmd0 & DSCR_CMD0_V)
return 0;
- }
- /* Load up buffer address and byte count.
- */
+ /* Load up buffer address and byte count. */
dp->dscr_source0 = virt_to_phys(buf);
dp->dscr_cmd1 = nbytes;
- /* Check flags */
+ /* Check flags */
if (flags & DDMA_FLAGS_IE)
dp->dscr_cmd0 |= DSCR_CMD0_IE;
if (flags & DDMA_FLAGS_NOIE)
@@ -595,23 +589,21 @@ _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags)
/*
* There is an errata on the Au1200/Au1550 parts that could result
- * in "stale" data being DMA'd. It has to do with the snoop logic on
- * the dache eviction buffer. NONCOHERENT_IO is on by default for
- * these parts. If it is fixedin the future, these dma_cache_inv will
+ * in "stale" data being DMA'ed. It has to do with the snoop logic on
+ * the cache eviction buffer. DMA_NONCOHERENT is on by default for
+ * these parts. If it is fixed in the future, these dma_cache_inv will
* just be nothing more than empty macros. See io.h.
- * */
+ */
dma_cache_wback_inv((unsigned long)buf, nbytes);
- dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */
+ dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */
au_sync();
dma_cache_wback_inv((unsigned long)dp, sizeof(dp));
- ctp->chan_ptr->ddma_dbell = 0;
+ ctp->chan_ptr->ddma_dbell = 0;
- /* Get next descriptor pointer.
- */
+ /* Get next descriptor pointer. */
ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
- /* return something not zero.
- */
+ /* Return something non-zero. */
return nbytes;
}
EXPORT_SYMBOL(_au1xxx_dbdma_put_source);
@@ -654,81 +646,77 @@ _au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags)
dp->dscr_dest0 = virt_to_phys(buf);
dp->dscr_cmd1 = nbytes;
#if 0
- printk("cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n",
- dp->dscr_cmd0, dp->dscr_cmd1, dp->dscr_source0,
- dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1 );
+ printk(KERN_DEBUG "cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n",
+ dp->dscr_cmd0, dp->dscr_cmd1, dp->dscr_source0,
+ dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1);
#endif
/*
* There is an errata on the Au1200/Au1550 parts that could result in
- * "stale" data being DMA'd. It has to do with the snoop logic on the
- * dache eviction buffer. NONCOHERENT_IO is on by default for these
- * parts. If it is fixedin the future, these dma_cache_inv will just
+ * "stale" data being DMA'ed. It has to do with the snoop logic on the
+ * cache eviction buffer. DMA_NONCOHERENT is on by default for these
+ * parts. If it is fixed in the future, these dma_cache_inv will just
* be nothing more than empty macros. See io.h.
- * */
+ */
dma_cache_inv((unsigned long)buf, nbytes);
dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */
au_sync();
dma_cache_wback_inv((unsigned long)dp, sizeof(dp));
- ctp->chan_ptr->ddma_dbell = 0;
+ ctp->chan_ptr->ddma_dbell = 0;
- /* Get next descriptor pointer.
- */
+ /* Get next descriptor pointer. */
ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
- /* return something not zero.
- */
+ /* Return something non-zero. */
return nbytes;
}
EXPORT_SYMBOL(_au1xxx_dbdma_put_dest);
-/* Get a destination buffer into the DMA ring.
+/*
+ * Get a destination buffer into the DMA ring.
* Normally used to get a full buffer from the ring during fifo
* to memory transfers. This does not set the valid bit, you will
* have to put another destination buffer to keep the DMA going.
*/
-u32
-au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes)
+u32 au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes)
{
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
u32 rv;
- /* I guess we could check this to be within the
+ /*
+ * I guess we could check this to be within the
* range of the table......
*/
ctp = *((chan_tab_t **)chanid);
- /* We should have multiple callers for a particular channel,
+ /*
+ * We should have multiple callers for a particular channel,
* an interrupt doesn't affect this pointer nor the descriptor,
* so no locking should be needed.
*/
dp = ctp->get_ptr;
- /* If the descriptor is valid, we are way ahead of the DMA
+ /*
+ * If the descriptor is valid, we are way ahead of the DMA
* engine, so just return an error condition.
*/
if (dp->dscr_cmd0 & DSCR_CMD0_V)
return 0;
- /* Return buffer address and byte count.
- */
+ /* Return buffer address and byte count. */
*buf = (void *)(phys_to_virt(dp->dscr_dest0));
*nbytes = dp->dscr_cmd1;
rv = dp->dscr_stat;
- /* Get next descriptor pointer.
- */
+ /* Get next descriptor pointer. */
ctp->get_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
- /* return something not zero.
- */
+ /* Return something non-zero. */
return rv;
}
-
EXPORT_SYMBOL_GPL(au1xxx_dbdma_get_dest);
-void
-au1xxx_dbdma_stop(u32 chanid)
+void au1xxx_dbdma_stop(u32 chanid)
{
chan_tab_t *ctp;
au1x_dma_chan_t *cp;
@@ -743,7 +731,7 @@ au1xxx_dbdma_stop(u32 chanid)
udelay(1);
halt_timeout++;
if (halt_timeout > 100) {
- printk("warning: DMA channel won't halt\n");
+ printk(KERN_WARNING "warning: DMA channel won't halt\n");
break;
}
}
@@ -753,12 +741,12 @@ au1xxx_dbdma_stop(u32 chanid)
}
EXPORT_SYMBOL(au1xxx_dbdma_stop);
-/* Start using the current descriptor pointer. If the dbdma encounters
- * a not valid descriptor, it will stop. In this case, we can just
+/*
+ * Start using the current descriptor pointer. If the DBDMA encounters
+ * a non-valid descriptor, it will stop. In this case, we can just
* continue by adding a buffer to the list and starting again.
*/
-void
-au1xxx_dbdma_start(u32 chanid)
+void au1xxx_dbdma_start(u32 chanid)
{
chan_tab_t *ctp;
au1x_dma_chan_t *cp;
@@ -773,8 +761,7 @@ au1xxx_dbdma_start(u32 chanid)
}
EXPORT_SYMBOL(au1xxx_dbdma_start);
-void
-au1xxx_dbdma_reset(u32 chanid)
+void au1xxx_dbdma_reset(u32 chanid)
{
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
@@ -784,14 +771,14 @@ au1xxx_dbdma_reset(u32 chanid)
ctp = *((chan_tab_t **)chanid);
ctp->get_ptr = ctp->put_ptr = ctp->cur_ptr = ctp->chan_desc_base;
- /* Run through the descriptors and reset the valid indicator.
- */
+ /* Run through the descriptors and reset the valid indicator. */
dp = ctp->chan_desc_base;
do {
dp->dscr_cmd0 &= ~DSCR_CMD0_V;
- /* reset our SW status -- this is used to determine
- * if a descriptor is in use by upper level SW. Since
+ /*
+ * Reset our software status -- this is used to determine
+ * if a descriptor is in use by upper level software. Since
* posting can reset 'V' bit.
*/
dp->sw_status = 0;
@@ -800,8 +787,7 @@ au1xxx_dbdma_reset(u32 chanid)
}
EXPORT_SYMBOL(au1xxx_dbdma_reset);
-u32
-au1xxx_get_dma_residue(u32 chanid)
+u32 au1xxx_get_dma_residue(u32 chanid)
{
chan_tab_t *ctp;
au1x_dma_chan_t *cp;
@@ -810,18 +796,15 @@ au1xxx_get_dma_residue(u32 chanid)
ctp = *((chan_tab_t **)chanid);
cp = ctp->chan_ptr;
- /* This is only valid if the channel is stopped.
- */
+ /* This is only valid if the channel is stopped. */
rv = cp->ddma_bytecnt;
au_sync();
return rv;
}
-
EXPORT_SYMBOL_GPL(au1xxx_get_dma_residue);
-void
-au1xxx_dbdma_chan_free(u32 chanid)
+void au1xxx_dbdma_chan_free(u32 chanid)
{
chan_tab_t *ctp;
dbdev_tab_t *stp, *dtp;
@@ -842,8 +825,7 @@ au1xxx_dbdma_chan_free(u32 chanid)
}
EXPORT_SYMBOL(au1xxx_dbdma_chan_free);
-static irqreturn_t
-dbdma_interrupt(int irq, void *dev_id)
+static irqreturn_t dbdma_interrupt(int irq, void *dev_id)
{
u32 intstat;
u32 chan_index;
@@ -859,13 +841,12 @@ dbdma_interrupt(int irq, void *dev_id)
cp = ctp->chan_ptr;
dp = ctp->cur_ptr;
- /* Reset interrupt.
- */
+ /* Reset interrupt. */
cp->ddma_irq = 0;
au_sync();
if (ctp->chan_callback)
- (ctp->chan_callback)(irq, ctp->chan_callparam);
+ ctp->chan_callback(irq, ctp->chan_callparam);
ctp->cur_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
return IRQ_RETVAL(1);
@@ -890,47 +871,47 @@ static void au1xxx_dbdma_init(void)
if (request_irq(irq_nr, dbdma_interrupt, IRQF_DISABLED,
"Au1xxx dbdma", (void *)dbdma_gptr))
- printk("Can't get 1550 dbdma irq");
+ printk(KERN_ERR "Can't get 1550 dbdma irq");
}
-void
-au1xxx_dbdma_dump(u32 chanid)
+void au1xxx_dbdma_dump(u32 chanid)
{
- chan_tab_t *ctp;
- au1x_ddma_desc_t *dp;
- dbdev_tab_t *stp, *dtp;
- au1x_dma_chan_t *cp;
- u32 i = 0;
+ chan_tab_t *ctp;
+ au1x_ddma_desc_t *dp;
+ dbdev_tab_t *stp, *dtp;
+ au1x_dma_chan_t *cp;
+ u32 i = 0;
ctp = *((chan_tab_t **)chanid);
stp = ctp->chan_src;
dtp = ctp->chan_dest;
cp = ctp->chan_ptr;
- printk("Chan %x, stp %x (dev %d) dtp %x (dev %d) \n",
- (u32)ctp, (u32)stp, stp - dbdev_tab, (u32)dtp, dtp - dbdev_tab);
- printk("desc base %x, get %x, put %x, cur %x\n",
- (u32)(ctp->chan_desc_base), (u32)(ctp->get_ptr),
- (u32)(ctp->put_ptr), (u32)(ctp->cur_ptr));
-
- printk("dbdma chan %x\n", (u32)cp);
- printk("cfg %08x, desptr %08x, statptr %08x\n",
- cp->ddma_cfg, cp->ddma_desptr, cp->ddma_statptr);
- printk("dbell %08x, irq %08x, stat %08x, bytecnt %08x\n",
- cp->ddma_dbell, cp->ddma_irq, cp->ddma_stat, cp->ddma_bytecnt);
-
-
- /* Run through the descriptors
- */
+ printk(KERN_DEBUG "Chan %x, stp %x (dev %d) dtp %x (dev %d) \n",
+ (u32)ctp, (u32)stp, stp - dbdev_tab, (u32)dtp,
+ dtp - dbdev_tab);
+ printk(KERN_DEBUG "desc base %x, get %x, put %x, cur %x\n",
+ (u32)(ctp->chan_desc_base), (u32)(ctp->get_ptr),
+ (u32)(ctp->put_ptr), (u32)(ctp->cur_ptr));
+
+ printk(KERN_DEBUG "dbdma chan %x\n", (u32)cp);
+ printk(KERN_DEBUG "cfg %08x, desptr %08x, statptr %08x\n",
+ cp->ddma_cfg, cp->ddma_desptr, cp->ddma_statptr);
+ printk(KERN_DEBUG "dbell %08x, irq %08x, stat %08x, bytecnt %08x\n",
+ cp->ddma_dbell, cp->ddma_irq, cp->ddma_stat,
+ cp->ddma_bytecnt);
+
+ /* Run through the descriptors */
dp = ctp->chan_desc_base;
do {
- printk("Dp[%d]= %08x, cmd0 %08x, cmd1 %08x\n",
- i++, (u32)dp, dp->dscr_cmd0, dp->dscr_cmd1);
- printk("src0 %08x, src1 %08x, dest0 %08x, dest1 %08x\n",
- dp->dscr_source0, dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1);
- printk("stat %08x, nxtptr %08x\n",
- dp->dscr_stat, dp->dscr_nxtptr);
+ printk(KERN_DEBUG "Dp[%d]= %08x, cmd0 %08x, cmd1 %08x\n",
+ i++, (u32)dp, dp->dscr_cmd0, dp->dscr_cmd1);
+ printk(KERN_DEBUG "src0 %08x, src1 %08x, dest0 %08x, dest1 %08x\n",
+ dp->dscr_source0, dp->dscr_source1,
+ dp->dscr_dest0, dp->dscr_dest1);
+ printk(KERN_DEBUG "stat %08x, nxtptr %08x\n",
+ dp->dscr_stat, dp->dscr_nxtptr);
dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
} while (dp != ctp->chan_desc_base);
}
@@ -938,32 +919,33 @@ au1xxx_dbdma_dump(u32 chanid)
/* Put a descriptor into the DMA ring.
* This updates the source/destination pointers and byte count.
*/
-u32
-au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr )
+u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr)
{
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
- u32 nbytes=0;
+ u32 nbytes = 0;
- /* I guess we could check this to be within the
- * range of the table......
- */
+ /*
+ * I guess we could check this to be within the
+ * range of the table......
+ */
ctp = *((chan_tab_t **)chanid);
- /* We should have multiple callers for a particular channel,
- * an interrupt doesn't affect this pointer nor the descriptor,
- * so no locking should be needed.
- */
+ /*
+ * We should have multiple callers for a particular channel,
+ * an interrupt doesn't affect this pointer nor the descriptor,
+ * so no locking should be needed.
+ */
dp = ctp->put_ptr;
- /* If the descriptor is valid, we are way ahead of the DMA
- * engine, so just return an error condition.
- */
+ /*
+ * If the descriptor is valid, we are way ahead of the DMA
+ * engine, so just return an error condition.
+ */
if (dp->dscr_cmd0 & DSCR_CMD0_V)
return 0;
- /* Load up buffer addresses and byte count.
- */
+ /* Load up buffer addresses and byte count. */
dp->dscr_dest0 = dscr->dscr_dest0;
dp->dscr_source0 = dscr->dscr_source0;
dp->dscr_dest1 = dscr->dscr_dest1;
@@ -975,14 +957,11 @@ au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr )
dp->dscr_cmd0 |= dscr->dscr_cmd0 | DSCR_CMD0_V;
ctp->chan_ptr->ddma_dbell = 0;
- /* Get next descriptor pointer.
- */
+ /* Get next descriptor pointer. */
ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
- /* return something not zero.
- */
+ /* Return something non-zero. */
return nbytes;
}
#endif /* defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) */
-
diff --git a/arch/mips/au1000/common/dbg_io.c b/arch/mips/au1000/common/dbg_io.c
index eae1bb2ca26e..af5be7df2f2a 100644
--- a/arch/mips/au1000/common/dbg_io.c
+++ b/arch/mips/au1000/common/dbg_io.c
@@ -1,3 +1,4 @@
+#include <linux/types.h>
#include <asm/mach-au1x00/au1000.h>
@@ -8,12 +9,6 @@
* uart to be used for debugging.
*/
#define DEBUG_BASE UART_DEBUG_BASE
-/**/
-
-/* we need uint32 uint8 */
-/* #include "types.h" */
-typedef unsigned char uint8;
-typedef unsigned int uint32;
#define UART16550_BAUD_2400 2400
#define UART16550_BAUD_4800 4800
@@ -51,17 +46,15 @@ typedef unsigned int uint32;
#define UART_MOD_CNTRL 0x100 /* Module Control */
/* memory-mapped read/write of the port */
-#define UART16550_READ(y) (au_readl(DEBUG_BASE + y) & 0xff)
-#define UART16550_WRITE(y, z) (au_writel(z&0xff, DEBUG_BASE + y))
+#define UART16550_READ(y) (au_readl(DEBUG_BASE + y) & 0xff)
+#define UART16550_WRITE(y, z) (au_writel(z & 0xff, DEBUG_BASE + y))
extern unsigned long calc_clock(void);
-void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
+void debugInit(u32 baud, u8 data, u8 parity, u8 stop)
{
-
- if (UART16550_READ(UART_MOD_CNTRL) != 0x3) {
+ if (UART16550_READ(UART_MOD_CNTRL) != 0x3)
UART16550_WRITE(UART_MOD_CNTRL, 3);
- }
calc_clock();
/* disable interrupts */
@@ -69,7 +62,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
/* set up baud rate */
{
- uint32 divisor;
+ u32 divisor;
/* set divisor */
divisor = get_au1x00_uart_baud_base() / baud;
@@ -80,9 +73,9 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
UART16550_WRITE(UART_LCR, (data | parity | stop));
}
-static int remoteDebugInitialized = 0;
+static int remoteDebugInitialized;
-uint8 getDebugChar(void)
+u8 getDebugChar(void)
{
if (!remoteDebugInitialized) {
remoteDebugInitialized = 1;
@@ -92,15 +85,13 @@ uint8 getDebugChar(void)
UART16550_STOP_1BIT);
}
- while((UART16550_READ(UART_LSR) & 0x1) == 0);
+ while ((UART16550_READ(UART_LSR) & 0x1) == 0);
return UART16550_READ(UART_RX);
}
-int putDebugChar(uint8 byte)
+int putDebugChar(u8 byte)
{
-// int i;
-
if (!remoteDebugInitialized) {
remoteDebugInitialized = 1;
debugInit(UART16550_BAUD_115200,
@@ -109,9 +100,8 @@ int putDebugChar(uint8 byte)
UART16550_STOP_1BIT);
}
- while ((UART16550_READ(UART_LSR)&0x40) == 0);
+ while ((UART16550_READ(UART_LSR) & 0x40) == 0);
UART16550_WRITE(UART_TX, byte);
- //for (i=0;i<0xfff;i++);
return 1;
}
diff --git a/arch/mips/au1000/common/dma.c b/arch/mips/au1000/common/dma.c
index 95f69ea146e9..d6fbda232e6a 100644
--- a/arch/mips/au1000/common/dma.c
+++ b/arch/mips/au1000/common/dma.c
@@ -1,12 +1,11 @@
/*
*
* BRIEF MODULE DESCRIPTION
- * A DMA channel allocator for Au1000. API is modeled loosely off of
+ * A DMA channel allocator for Au1x00. API is modeled loosely off of
* linux/kernel/dma.c.
*
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * stevel@mvista.com or source@mvista.com
+ * Copyright 2000, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
* Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
*
* This program is free software; you can redistribute it and/or modify it
@@ -39,7 +38,8 @@
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/au1000_dma.h>
-#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1100)
+#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || \
+ defined(CONFIG_SOC_AU1100)
/*
* A note on resource allocation:
*
@@ -56,7 +56,6 @@
* returned from request_dma.
*/
-
DEFINE_SPINLOCK(au1000_dma_spin_lock);
struct dma_chan au1000_dma_table[NUM_AU1000_DMA_CHANNELS] = {
@@ -71,7 +70,7 @@ struct dma_chan au1000_dma_table[NUM_AU1000_DMA_CHANNELS] = {
};
EXPORT_SYMBOL(au1000_dma_table);
-// Device FIFO addresses and default DMA modes
+/* Device FIFO addresses and default DMA modes */
static const struct dma_dev {
unsigned int fifo_addr;
unsigned int dma_mode;
@@ -80,8 +79,8 @@ static const struct dma_dev {
{UART0_ADDR + UART_RX, 0},
{0, 0},
{0, 0},
- {AC97C_DATA, DMA_DW16 }, // coherent
- {AC97C_DATA, DMA_DR | DMA_DW16 }, // coherent
+ {AC97C_DATA, DMA_DW16 }, /* coherent */
+ {AC97C_DATA, DMA_DR | DMA_DW16 }, /* coherent */
{UART3_ADDR + UART_TX, DMA_DW8 | DMA_NC},
{UART3_ADDR + UART_RX, DMA_DR | DMA_DW8 | DMA_NC},
{USBD_EP0RD, DMA_DR | DMA_DW8 | DMA_NC},
@@ -101,10 +100,10 @@ int au1000_dma_read_proc(char *buf, char **start, off_t fpos,
struct dma_chan *chan;
for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++) {
- if ((chan = get_dma_chan(i)) != NULL) {
+ chan = get_dma_chan(i);
+ if (chan != NULL)
len += sprintf(buf + len, "%2d: %s\n",
i, chan->dev_str);
- }
}
if (fpos >= len) {
@@ -113,18 +112,19 @@ int au1000_dma_read_proc(char *buf, char **start, off_t fpos,
return 0;
}
*start = buf + fpos;
- if ((len -= fpos) > length)
+ len -= fpos;
+ if (len > length)
return length;
*eof = 1;
return len;
}
-// Device FIFO addresses and default DMA modes - 2nd bank
+/* Device FIFO addresses and default DMA modes - 2nd bank */
static const struct dma_dev dma_dev_table_bank2[DMA_NUM_DEV_BANK2] = {
- {SD0_XMIT_FIFO, DMA_DS | DMA_DW8}, // coherent
- {SD0_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8}, // coherent
- {SD1_XMIT_FIFO, DMA_DS | DMA_DW8}, // coherent
- {SD1_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8} // coherent
+ { SD0_XMIT_FIFO, DMA_DS | DMA_DW8 }, /* coherent */
+ { SD0_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8 }, /* coherent */
+ { SD1_XMIT_FIFO, DMA_DS | DMA_DW8 }, /* coherent */
+ { SD1_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8 } /* coherent */
};
void dump_au1000_dma_channel(unsigned int dmanr)
@@ -150,7 +150,6 @@ void dump_au1000_dma_channel(unsigned int dmanr)
au_readl(chan->io + DMA_BUFFER1_COUNT));
}
-
/*
* Finds a free channel, and binds the requested device to it.
* Returns the allocated channel number, or negative on error.
@@ -169,14 +168,14 @@ int request_au1000_dma(int dev_id, const char *dev_str,
if (dev_id < 0 || dev_id >= (DMA_NUM_DEV + DMA_NUM_DEV_BANK2))
return -EINVAL;
#else
- if (dev_id < 0 || dev_id >= DMA_NUM_DEV)
+ if (dev_id < 0 || dev_id >= DMA_NUM_DEV)
return -EINVAL;
#endif
- for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++) {
+ for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++)
if (au1000_dma_table[i].dev_id < 0)
break;
- }
+
if (i == NUM_AU1000_DMA_CHANNELS)
return -ENODEV;
@@ -185,15 +184,15 @@ int request_au1000_dma(int dev_id, const char *dev_str,
if (dev_id >= DMA_NUM_DEV) {
dev_id -= DMA_NUM_DEV;
dev = &dma_dev_table_bank2[dev_id];
- } else {
+ } else
dev = &dma_dev_table[dev_id];
- }
if (irqhandler) {
chan->irq = AU1000_DMA_INT_BASE + i;
chan->irq_dev = irq_dev_id;
- if ((ret = request_irq(chan->irq, irqhandler, irqflags,
- dev_str, chan->irq_dev))) {
+ ret = request_irq(chan->irq, irqhandler, irqflags, dev_str,
+ chan->irq_dev);
+ if (ret) {
chan->irq = 0;
chan->irq_dev = NULL;
return ret;
@@ -203,7 +202,7 @@ int request_au1000_dma(int dev_id, const char *dev_str,
chan->irq_dev = NULL;
}
- // fill it in
+ /* fill it in */
chan->io = DMA_CHANNEL_BASE + i * DMA_CHANNEL_LEN;
chan->dev_id = dev_id;
chan->dev_str = dev_str;
@@ -220,8 +219,9 @@ EXPORT_SYMBOL(request_au1000_dma);
void free_au1000_dma(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan) {
- printk("Trying to free DMA%d\n", dmanr);
+ printk(KERN_ERR "Error trying to free DMA%d\n", dmanr);
return;
}
@@ -235,4 +235,4 @@ void free_au1000_dma(unsigned int dmanr)
}
EXPORT_SYMBOL(free_au1000_dma);
-#endif // AU1000 AU1500 AU1100
+#endif /* AU1000 AU1500 AU1100 */
diff --git a/arch/mips/au1000/common/gpio.c b/arch/mips/au1000/common/gpio.c
index 525452589971..b485d94ce8a5 100644
--- a/arch/mips/au1000/common/gpio.c
+++ b/arch/mips/au1000/common/gpio.c
@@ -69,7 +69,7 @@ static int au1xxx_gpio2_direction_output(unsigned gpio, int value)
static int au1xxx_gpio1_read(unsigned gpio)
{
- return ((gpio1->pinstaterd >> gpio) & 0x01);
+ return (gpio1->pinstaterd >> gpio) & 0x01;
}
static void au1xxx_gpio1_write(unsigned gpio, int value)
@@ -104,7 +104,6 @@ int au1xxx_gpio_get_value(unsigned gpio)
else
return au1xxx_gpio1_read(gpio);
}
-
EXPORT_SYMBOL(au1xxx_gpio_get_value);
void au1xxx_gpio_set_value(unsigned gpio, int value)
@@ -118,7 +117,6 @@ void au1xxx_gpio_set_value(unsigned gpio, int value)
else
au1xxx_gpio1_write(gpio, value);
}
-
EXPORT_SYMBOL(au1xxx_gpio_set_value);
int au1xxx_gpio_direction_input(unsigned gpio)
@@ -132,7 +130,6 @@ int au1xxx_gpio_direction_input(unsigned gpio)
return au1xxx_gpio1_direction_input(gpio);
}
-
EXPORT_SYMBOL(au1xxx_gpio_direction_input);
int au1xxx_gpio_direction_output(unsigned gpio, int value)
@@ -146,5 +143,4 @@ int au1xxx_gpio_direction_output(unsigned gpio, int value)
return au1xxx_gpio1_direction_output(gpio, value);
}
-
EXPORT_SYMBOL(au1xxx_gpio_direction_output);
diff --git a/arch/mips/au1000/common/irq.c b/arch/mips/au1000/common/irq.c
index f0626992fd75..40c6ceceb5f9 100644
--- a/arch/mips/au1000/common/irq.c
+++ b/arch/mips/au1000/common/irq.c
@@ -210,10 +210,8 @@ static inline void mask_and_ack_either_edge_irq(unsigned int irq_nr)
au_sync();
}
-
static inline void mask_and_ack_level_irq(unsigned int irq_nr)
{
-
local_disable_irq(irq_nr);
au_sync();
#if defined(CONFIG_MIPS_PB1000)
@@ -263,14 +261,14 @@ void restore_local_and_enable(int controller, unsigned long mask)
unsigned long flags, new_mask;
spin_lock_irqsave(&irq_lock, flags);
- for (i = 0; i < 32; i++) {
+ for (i = 0; i < 32; i++)
if (mask & (1 << i)) {
if (controller)
local_enable_irq(i + 32);
else
local_enable_irq(i);
}
- }
+
if (controller)
new_mask = au_readl(IC1_MASKSET);
else
diff --git a/arch/mips/au1000/common/pci.c b/arch/mips/au1000/common/pci.c
index 7e966b31e3e1..7866cf50cf99 100644
--- a/arch/mips/au1000/common/pci.c
+++ b/arch/mips/au1000/common/pci.c
@@ -2,9 +2,8 @@
* BRIEF MODULE DESCRIPTION
* Alchemy/AMD Au1x00 PCI support.
*
- * Copyright 2001-2003, 2007 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001-2003, 2007-2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
*
@@ -86,9 +85,9 @@ static int __init au1x_pci_setup(void)
u32 prid = read_c0_prid();
if ((prid & 0xFF000000) == 0x01000000 && prid < 0x01030202) {
- au_writel((1 << 16) | au_readl(Au1500_PCI_CFG),
- Au1500_PCI_CFG);
- printk("Non-coherent PCI accesses enabled\n");
+ au_writel((1 << 16) | au_readl(Au1500_PCI_CFG),
+ Au1500_PCI_CFG);
+ printk(KERN_INFO "Non-coherent PCI accesses enabled\n");
}
}
#endif
diff --git a/arch/mips/au1000/common/platform.c b/arch/mips/au1000/common/platform.c
index 31d2a2270878..8cae7753ef79 100644
--- a/arch/mips/au1000/common/platform.c
+++ b/arch/mips/au1000/common/platform.c
@@ -269,8 +269,8 @@ static struct platform_device au1x00_pcmcia_device = {
#ifdef SMBUS_PSC_BASE
static struct resource pbdb_smbus_resources[] = {
{
- .start = SMBUS_PSC_BASE,
- .end = SMBUS_PSC_BASE + 0x24 - 1,
+ .start = CPHYSADDR(SMBUS_PSC_BASE),
+ .end = CPHYSADDR(SMBUS_PSC_BASE + 0xfffff),
.flags = IORESOURCE_MEM,
},
};
@@ -302,16 +302,17 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = {
#endif
};
-int __init au1xxx_platform_init(void)
+static int __init au1xxx_platform_init(void)
{
unsigned int uartclk = get_au1x00_uart_baud_base() * 16;
int i;
/* Fill up uartclk. */
- for (i = 0; au1x00_uart_data[i].flags ; i++)
+ for (i = 0; au1x00_uart_data[i].flags; i++)
au1x00_uart_data[i].uartclk = uartclk;
- return platform_add_devices(au1xxx_platform_devices, ARRAY_SIZE(au1xxx_platform_devices));
+ return platform_add_devices(au1xxx_platform_devices,
+ ARRAY_SIZE(au1xxx_platform_devices));
}
arch_initcall(au1xxx_platform_init);
diff --git a/arch/mips/au1000/common/power.c b/arch/mips/au1000/common/power.c
index a8cd2c1b9e1b..2166b9e1e80c 100644
--- a/arch/mips/au1000/common/power.c
+++ b/arch/mips/au1000/common/power.c
@@ -1,10 +1,9 @@
/*
* BRIEF MODULE DESCRIPTION
- * Au1000 Power Management routines.
+ * Au1xx0 Power Management routines.
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* Some of the routines are right out of init/main.c, whose
* copyrights apply here.
@@ -43,10 +42,10 @@
#ifdef CONFIG_PM
#define DEBUG 1
-#ifdef DEBUG
-# define DPRINTK(fmt, args...) printk("%s: " fmt, __func__, ## args)
+#ifdef DEBUG
+#define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __func__, ## args)
#else
-# define DPRINTK(fmt, args...)
+#define DPRINTK(fmt, args...)
#endif
static void au1000_calibrate_delay(void);
@@ -57,7 +56,8 @@ extern void local_enable_irq(unsigned int irq_nr);
static DEFINE_SPINLOCK(pm_lock);
-/* We need to save/restore a bunch of core registers that are
+/*
+ * We need to save/restore a bunch of core registers that are
* either volatile or reset to some state across a processor sleep.
* If reading a register doesn't provide a proper result for a
* later restore, we have to provide a function for loading that
@@ -78,24 +78,25 @@ static unsigned int sleep_usbhost_enable;
static unsigned int sleep_usbdev_enable;
static unsigned int sleep_static_memctlr[4][3];
-/* Define this to cause the value you write to /proc/sys/pm/sleep to
+/*
+ * Define this to cause the value you write to /proc/sys/pm/sleep to
* set the TOY timer for the amount of time you want to sleep.
* This is done mainly for testing, but may be useful in other cases.
* The value is number of 32KHz ticks to sleep.
*/
#define SLEEP_TEST_TIMEOUT 1
-#ifdef SLEEP_TEST_TIMEOUT
-static int sleep_ticks;
+#ifdef SLEEP_TEST_TIMEOUT
+static int sleep_ticks;
void wakeup_counter0_set(int ticks);
#endif
-static void
-save_core_regs(void)
+static void save_core_regs(void)
{
extern void save_au1xxx_intctl(void);
extern void pm_eth0_shutdown(void);
- /* Do the serial ports.....these really should be a pm_*
+ /*
+ * Do the serial ports.....these really should be a pm_*
* registered function by the driver......but of course the
* standard serial driver doesn't understand our Au1xxx
* unique registers.
@@ -106,27 +107,24 @@ save_core_regs(void)
sleep_uart0_clkdiv = au_readl(UART0_ADDR + UART_CLK);
sleep_uart0_enable = au_readl(UART0_ADDR + UART_MOD_CNTRL);
- /* Shutdown USB host/device.
- */
+ /* Shutdown USB host/device. */
sleep_usbhost_enable = au_readl(USB_HOST_CONFIG);
- /* There appears to be some undocumented reset register....
- */
+ /* There appears to be some undocumented reset register.... */
au_writel(0, 0xb0100004); au_sync();
au_writel(0, USB_HOST_CONFIG); au_sync();
sleep_usbdev_enable = au_readl(USBD_ENABLE);
au_writel(0, USBD_ENABLE); au_sync();
- /* Save interrupt controller state.
- */
+ /* Save interrupt controller state. */
save_au1xxx_intctl();
- /* Clocks and PLLs.
- */
+ /* Clocks and PLLs. */
sleep_aux_pll_cntrl = au_readl(SYS_AUXPLL);
- /* We don't really need to do this one, but unless we
+ /*
+ * We don't really need to do this one, but unless we
* write it again it won't have a valid value if we
* happen to read it.
*/
@@ -134,8 +132,7 @@ save_core_regs(void)
sleep_pin_function = au_readl(SYS_PINFUNC);
- /* Save the static memory controller configuration.
- */
+ /* Save the static memory controller configuration. */
sleep_static_memctlr[0][0] = au_readl(MEM_STCFG0);
sleep_static_memctlr[0][1] = au_readl(MEM_STTIME0);
sleep_static_memctlr[0][2] = au_readl(MEM_STADDR0);
@@ -150,8 +147,7 @@ save_core_regs(void)
sleep_static_memctlr[3][2] = au_readl(MEM_STADDR3);
}
-static void
-restore_core_regs(void)
+static void restore_core_regs(void)
{
extern void restore_au1xxx_intctl(void);
extern void wakeup_counter0_adjust(void);
@@ -160,8 +156,7 @@ restore_core_regs(void)
au_writel(sleep_cpu_pll_cntrl, SYS_CPUPLL); au_sync();
au_writel(sleep_pin_function, SYS_PINFUNC); au_sync();
- /* Restore the static memory controller configuration.
- */
+ /* Restore the static memory controller configuration. */
au_writel(sleep_static_memctlr[0][0], MEM_STCFG0);
au_writel(sleep_static_memctlr[0][1], MEM_STTIME0);
au_writel(sleep_static_memctlr[0][2], MEM_STADDR0);
@@ -175,7 +170,8 @@ restore_core_regs(void)
au_writel(sleep_static_memctlr[3][1], MEM_STTIME3);
au_writel(sleep_static_memctlr[3][2], MEM_STADDR3);
- /* Enable the UART if it was enabled before sleep.
+ /*
+ * Enable the UART if it was enabled before sleep.
* I guess I should define module control bits........
*/
if (sleep_uart0_enable & 0x02) {
@@ -202,7 +198,7 @@ void wakeup_from_suspend(void)
int au_sleep(void)
{
unsigned long wakeup, flags;
- extern void save_and_sleep(void);
+ extern void save_and_sleep(void);
spin_lock_irqsave(&pm_lock, flags);
@@ -210,23 +206,22 @@ int au_sleep(void)
flush_cache_all();
- /** The code below is all system dependent and we should probably
+ /**
+ ** The code below is all system dependent and we should probably
** have a function call out of here to set this up. You need
** to configure the GPIO or timer interrupts that will bring
** you out of sleep.
** For testing, the TOY counter wakeup is useful.
**/
-
#if 0
au_writel(au_readl(SYS_PINSTATERD) & ~(1 << 11), SYS_PINSTATERD);
- /* gpio 6 can cause a wake up event */
+ /* GPIO 6 can cause a wake up event */
wakeup = au_readl(SYS_WAKEMSK);
wakeup &= ~(1 << 8); /* turn off match20 wakeup */
- wakeup |= 1 << 6; /* turn on gpio 6 wakeup */
+ wakeup |= 1 << 6; /* turn on GPIO 6 wakeup */
#else
- /* For testing, allow match20 to wake us up.
- */
+ /* For testing, allow match20 to wake us up. */
#ifdef SLEEP_TEST_TIMEOUT
wakeup_counter0_set(sleep_ticks);
#endif
@@ -240,7 +235,8 @@ int au_sleep(void)
save_and_sleep();
- /* after a wakeup, the cpu vectors back to 0x1fc00000 so
+ /*
+ * After a wakeup, the cpu vectors back to 0x1fc00000, so
* it's up to the boot code to get us back here.
*/
restore_core_regs();
@@ -248,24 +244,22 @@ int au_sleep(void)
return 0;
}
-static int pm_do_sleep(ctl_table * ctl, int write, struct file *file,
- void __user *buffer, size_t * len, loff_t *ppos)
+static int pm_do_sleep(ctl_table *ctl, int write, struct file *file,
+ void __user *buffer, size_t *len, loff_t *ppos)
{
#ifdef SLEEP_TEST_TIMEOUT
#define TMPBUFLEN2 16
char buf[TMPBUFLEN2], *p;
#endif
- if (!write) {
+ if (!write)
*len = 0;
- } else {
+ else {
#ifdef SLEEP_TEST_TIMEOUT
- if (*len > TMPBUFLEN2 - 1) {
+ if (*len > TMPBUFLEN2 - 1)
return -EFAULT;
- }
- if (copy_from_user(buf, buffer, *len)) {
+ if (copy_from_user(buf, buffer, *len))
return -EFAULT;
- }
buf[*len] = 0;
p = buf;
sleep_ticks = simple_strtoul(p, &p, 0);
@@ -276,8 +270,8 @@ static int pm_do_sleep(ctl_table * ctl, int write, struct file *file,
return 0;
}
-static int pm_do_freq(ctl_table * ctl, int write, struct file *file,
- void __user *buffer, size_t * len, loff_t *ppos)
+static int pm_do_freq(ctl_table *ctl, int write, struct file *file,
+ void __user *buffer, size_t *len, loff_t *ppos)
{
int retval = 0, i;
unsigned long val, pll;
@@ -285,14 +279,14 @@ static int pm_do_freq(ctl_table * ctl, int write, struct file *file,
#define MAX_CPU_FREQ 396
char buf[TMPBUFLEN], *p;
unsigned long flags, intc0_mask, intc1_mask;
- unsigned long old_baud_base, old_cpu_freq, baud_rate, old_clk,
- old_refresh;
+ unsigned long old_baud_base, old_cpu_freq, old_clk, old_refresh;
unsigned long new_baud_base, new_cpu_freq, new_clk, new_refresh;
+ unsigned long baud_rate;
spin_lock_irqsave(&pm_lock, flags);
- if (!write) {
+ if (!write)
*len = 0;
- } else {
+ else {
/* Parse the new frequency */
if (*len > TMPBUFLEN - 1) {
spin_unlock_irqrestore(&pm_lock, flags);
@@ -312,7 +306,7 @@ static int pm_do_freq(ctl_table * ctl, int write, struct file *file,
pll = val / 12;
if ((pll > 33) || (pll < 7)) { /* 396 MHz max, 84 MHz min */
- /* revisit this for higher speed cpus */
+ /* Revisit this for higher speed CPUs */
spin_unlock_irqrestore(&pm_lock, flags);
return -EFAULT;
}
@@ -321,30 +315,28 @@ static int pm_do_freq(ctl_table * ctl, int write, struct file *file,
old_cpu_freq = get_au1x00_speed();
new_cpu_freq = pll * 12 * 1000000;
- new_baud_base = (new_cpu_freq / (2 * ((int)(au_readl(SYS_POWERCTRL)&0x03) + 2) * 16));
+ new_baud_base = (new_cpu_freq / (2 * ((int)(au_readl(SYS_POWERCTRL)
+ & 0x03) + 2) * 16));
set_au1x00_speed(new_cpu_freq);
set_au1x00_uart_baud_base(new_baud_base);
old_refresh = au_readl(MEM_SDREFCFG) & 0x1ffffff;
- new_refresh =
- ((old_refresh * new_cpu_freq) /
- old_cpu_freq) | (au_readl(MEM_SDREFCFG) & ~0x1ffffff);
+ new_refresh = ((old_refresh * new_cpu_freq) / old_cpu_freq) |
+ (au_readl(MEM_SDREFCFG) & ~0x1ffffff);
au_writel(pll, SYS_CPUPLL);
au_sync_delay(1);
au_writel(new_refresh, MEM_SDREFCFG);
au_sync_delay(1);
- for (i = 0; i < 4; i++) {
- if (au_readl
- (UART_BASE + UART_MOD_CNTRL +
- i * 0x00100000) == 3) {
- old_clk =
- au_readl(UART_BASE + UART_CLK +
- i * 0x00100000);
- // baud_rate = baud_base/clk
+ for (i = 0; i < 4; i++)
+ if (au_readl(UART_BASE + UART_MOD_CNTRL +
+ i * 0x00100000) == 3) {
+ old_clk = au_readl(UART_BASE + UART_CLK +
+ i * 0x00100000);
baud_rate = old_baud_base / old_clk;
- /* we won't get an exact baud rate and the error
+ /*
+ * We won't get an exact baud rate and the error
* could be significant enough that our new
* calculation will result in a clock that will
* give us a baud rate that's too far off from
@@ -359,18 +351,14 @@ static int pm_do_freq(ctl_table * ctl, int write, struct file *file,
else if (baud_rate > 17000)
baud_rate = 19200;
else
- (baud_rate = 9600);
- // new_clk = new_baud_base/baud_rate
+ baud_rate = 9600;
new_clk = new_baud_base / baud_rate;
- au_writel(new_clk,
- UART_BASE + UART_CLK +
- i * 0x00100000);
+ au_writel(new_clk, UART_BASE + UART_CLK +
+ i * 0x00100000);
au_sync_delay(10);
}
- }
}
-
/*
* We don't want _any_ interrupts other than match20. Otherwise our
* au1000_calibrate_delay() calculation will be off, potentially a lot.
@@ -428,14 +416,15 @@ static int __init pm_init(void)
__initcall(pm_init);
-
/*
* This is right out of init/main.c
*/
-/* This is the number of bits of precision for the loops_per_jiffy. Each
- bit takes on average 1.5/HZ seconds. This (like the original) is a little
- better than 1% */
+/*
+ * This is the number of bits of precision for the loops_per_jiffy.
+ * Each bit takes on average 1.5/HZ seconds. This (like the original)
+ * is a little better than 1%.
+ */
#define LPS_PREC 8
static void au1000_calibrate_delay(void)
@@ -443,14 +432,14 @@ static void au1000_calibrate_delay(void)
unsigned long ticks, loopbit;
int lps_precision = LPS_PREC;
- loops_per_jiffy = (1 << 12);
+ loops_per_jiffy = 1 << 12;
while (loops_per_jiffy <<= 1) {
- /* wait for "start of" clock tick */
+ /* Wait for "start of" clock tick */
ticks = jiffies;
while (ticks == jiffies)
/* nothing */ ;
- /* Go .. */
+ /* Go ... */
ticks = jiffies;
__delay(loops_per_jiffy);
ticks = jiffies - ticks;
@@ -458,8 +447,10 @@ static void au1000_calibrate_delay(void)
break;
}
-/* Do a binary approximation to get loops_per_jiffy set to equal one clock
- (up to lps_precision bits) */
+ /*
+ * Do a binary approximation to get loops_per_jiffy set to be equal
+ * one clock (up to lps_precision bits)
+ */
loops_per_jiffy >>= 1;
loopbit = loops_per_jiffy;
while (lps_precision-- && (loopbit >>= 1)) {
@@ -472,4 +463,4 @@ static void au1000_calibrate_delay(void)
loops_per_jiffy &= ~loopbit;
}
}
-#endif /* CONFIG_PM */
+#endif /* CONFIG_PM */
diff --git a/arch/mips/au1000/common/prom.c b/arch/mips/au1000/common/prom.c
index f10af829e4ec..18b310b475ca 100644
--- a/arch/mips/au1000/common/prom.c
+++ b/arch/mips/au1000/common/prom.c
@@ -3,9 +3,8 @@
* BRIEF MODULE DESCRIPTION
* PROM library initialisation code, supports YAMON and U-Boot.
*
- * Copyright 2000, 2001, 2006 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2000-2001, 2006, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This file was derived from Carsten Langgaard's
* arch/mips/mips-boards/xx files.
@@ -57,7 +56,7 @@ void prom_init_cmdline(void)
actr = 1; /* Always ignore argv[0] */
cp = &(arcs_cmdline[0]);
- while(actr < prom_argc) {
+ while (actr < prom_argc) {
strcpy(cp, prom_argv[actr]);
cp += strlen(prom_argv[actr]);
*cp++ = ' ';
@@ -84,10 +83,8 @@ char *prom_getenv(char *envname)
if (yamon) {
if (strcmp(envname, *env++) == 0)
return *env;
- } else {
- if (strncmp(envname, *env, i) == 0 && (*env)[i] == '=')
- return *env + i + 1;
- }
+ } else if (strncmp(envname, *env, i) == 0 && (*env)[i] == '=')
+ return *env + i + 1;
env++;
}
@@ -110,13 +107,13 @@ static inline void str2eaddr(unsigned char *ea, unsigned char *str)
{
int i;
- for(i = 0; i < 6; i++) {
+ for (i = 0; i < 6; i++) {
unsigned char num;
- if((*str == '.') || (*str == ':'))
+ if ((*str == '.') || (*str == ':'))
str++;
- num = str2hexnum(*str++) << 4;
- num |= (str2hexnum(*str++));
+ num = str2hexnum(*str++) << 4;
+ num |= str2hexnum(*str++);
ea[i] = num;
}
}
diff --git a/arch/mips/au1000/common/puts.c b/arch/mips/au1000/common/puts.c
index e34c67e89293..55bbe24d45b6 100644
--- a/arch/mips/au1000/common/puts.c
+++ b/arch/mips/au1000/common/puts.c
@@ -1,11 +1,10 @@
/*
*
* BRIEF MODULE DESCRIPTION
- * Low level uart routines to directly access a 16550 uart.
+ * Low level UART routines to directly access Alchemy UART.
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -40,12 +39,12 @@
static volatile unsigned long * const com1 = (unsigned long *)SERIAL_BASE;
-
#ifdef SLOW_DOWN
static inline void slow_down(void)
{
- int k;
- for (k=0; k<10000; k++);
+ int k;
+
+ for (k = 0; k < 10000; k++);
}
#else
#define slow_down()
@@ -54,16 +53,16 @@ static inline void slow_down(void)
void
prom_putchar(const unsigned char c)
{
- unsigned char ch;
- int i = 0;
+ unsigned char ch;
+ int i = 0;
+
+ do {
+ ch = com1[SER_CMD];
+ slow_down();
+ i++;
+ if (i > TIMEOUT)
+ break;
+ } while (0 == (ch & TX_BUSY));
- do {
- ch = com1[SER_CMD];
- slow_down();
- i++;
- if (i>TIMEOUT) {
- break;
- }
- } while (0 == (ch & TX_BUSY));
- com1[SER_DATA] = c;
+ com1[SER_DATA] = c;
}
diff --git a/arch/mips/au1000/common/reset.c b/arch/mips/au1000/common/reset.c
index 60cec537c745..d555429c8d6f 100644
--- a/arch/mips/au1000/common/reset.c
+++ b/arch/mips/au1000/common/reset.c
@@ -1,11 +1,10 @@
/*
*
* BRIEF MODULE DESCRIPTION
- * Au1000 reset routines.
+ * Au1xx0 reset routines.
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2006, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -28,10 +27,11 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <asm/cacheflush.h>
+
#include <asm/mach-au1x00/au1000.h>
extern int au_sleep(void);
-extern void (*flush_cache_all)(void);
void au1000_restart(char *command)
{
@@ -40,8 +40,8 @@ void au1000_restart(char *command)
u32 prid = read_c0_prid();
printk(KERN_NOTICE "\n** Resetting Integrated Peripherals\n");
- switch (prid & 0xFF000000)
- {
+
+ switch (prid & 0xFF000000) {
case 0x00000000: /* Au1000 */
au_writel(0x02, 0xb0000010); /* ac97_enable */
au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */
@@ -138,9 +138,6 @@ void au1000_restart(char *command)
au_writel(0x00, 0xb1900064); /* sys_auxpll */
au_writel(0x00, 0xb1900100); /* sys_pininputen */
break;
-
- default:
- break;
}
set_c0_status(ST0_BEV | ST0_ERL);
@@ -158,25 +155,25 @@ void au1000_restart(char *command)
void au1000_halt(void)
{
#if defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550)
- /* power off system */
- printk("\n** Powering off...\n");
- au_writew(au_readw(0xAF00001C) | (3<<14), 0xAF00001C);
+ /* Power off system */
+ printk(KERN_NOTICE "\n** Powering off...\n");
+ au_writew(au_readw(0xAF00001C) | (3 << 14), 0xAF00001C);
au_sync();
- while(1); /* should not get here */
+ while (1); /* should not get here */
#else
printk(KERN_NOTICE "\n** You can safely turn off the power\n");
#ifdef CONFIG_MIPS_MIRAGE
au_writel((1 << 26) | (1 << 10), GPIO2_OUTPUT);
#endif
#ifdef CONFIG_MIPS_DB1200
- au_writew(au_readw(0xB980001C) | (1<<14), 0xB980001C);
+ au_writew(au_readw(0xB980001C) | (1 << 14), 0xB980001C);
#endif
#ifdef CONFIG_PM
au_sleep();
- /* should not get here */
- printk(KERN_ERR "Unable to put cpu in sleep mode\n");
- while(1);
+ /* Should not get here */
+ printk(KERN_ERR "Unable to put CPU in sleep mode\n");
+ while (1);
#else
while (1)
__asm__(".set\tmips3\n\t"
diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c
index 0e86f7a6b4a7..1ac6b06f42a3 100644
--- a/arch/mips/au1000/common/setup.c
+++ b/arch/mips/au1000/common/setup.c
@@ -1,7 +1,6 @@
/*
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2000, 2007-2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com
*
* Updates to 2.6, Pete Popov, Embedded Alley Solutions, Inc.
*
@@ -48,7 +47,7 @@ void __init plat_mem_setup(void)
{
struct cpu_spec *sp;
char *argptr;
- unsigned long prid, cpufreq, bclk = 1;
+ unsigned long prid, cpufreq, bclk;
set_cpuspec();
sp = cur_cpu_spec[0];
@@ -66,42 +65,39 @@ void __init plat_mem_setup(void)
cpufreq = (au_readl(SYS_CPUPLL) & 0x3F) * 12;
printk(KERN_INFO "(PRID %08lx) @ %ld MHz\n", prid, cpufreq);
- bclk = sp->cpu_bclk;
- if (bclk)
- {
+ if (sp->cpu_bclk) {
/* Enable BCLK switching */
- bclk = au_readl(0xB190003C);
- au_writel(bclk | 0x60, 0xB190003C);
- printk("BCLK switching enabled!\n");
+ bclk = au_readl(SYS_POWERCTRL);
+ au_writel(bclk | 0x60, SYS_POWERCTRL);
+ printk(KERN_INFO "BCLK switching enabled!\n");
}
- if (sp->cpu_od) {
- /* Various early Au1000 Errata corrected by this */
- set_c0_config(1<<19); /* Set Config[OD] */
- }
- else {
+ if (sp->cpu_od)
+ /* Various early Au1xx0 errata corrected by this */
+ set_c0_config(1 << 19); /* Set Config[OD] */
+ else
/* Clear to obtain best system bus performance */
- clear_c0_config(1<<19); /* Clear Config[OD] */
- }
+ clear_c0_config(1 << 19); /* Clear Config[OD] */
argptr = prom_getcmdline();
#ifdef CONFIG_SERIAL_8250_CONSOLE
- if ((argptr = strstr(argptr, "console=")) == NULL) {
+ argptr = strstr(argptr, "console=");
+ if (argptr == NULL) {
argptr = prom_getcmdline();
strcat(argptr, " console=ttyS0,115200");
}
#endif
#ifdef CONFIG_FB_AU1100
- if ((argptr = strstr(argptr, "video=")) == NULL) {
- argptr = prom_getcmdline();
- /* default panel */
- /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
- }
+ argptr = strstr(argptr, "video=");
+ if (argptr == NULL) {
+ argptr = prom_getcmdline();
+ /* default panel */
+ /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
+ }
#endif
-
#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
/* au1000 does not support vra, au1500 and au1100 do */
strcat(argptr, " au1000_audio=vra");
@@ -129,7 +125,7 @@ void __init plat_mem_setup(void)
/* This routine should be valid for all Au1x based boards */
phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size)
{
- /* Don't fixup 36 bit addresses */
+ /* Don't fixup 36-bit addresses */
if ((phys_addr >> 32) != 0)
return phys_addr;
@@ -145,17 +141,17 @@ phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size)
}
#endif
- /* All Au1x SOCs have a pcmcia controller */
- /* We setup our 32 bit pseudo addresses to be equal to the
- * 36 bit addr >> 4, to make it easier to check the address
+ /*
+ * All Au1xx0 SOCs have a PCMCIA controller.
+ * We setup our 32-bit pseudo addresses to be equal to the
+ * 36-bit addr >> 4, to make it easier to check the address
* and fix it.
- * The Au1x socket 0 phys attribute address is 0xF 4000 0000.
+ * The PCMCIA socket 0 physical attribute address is 0xF 4000 0000.
* The pseudo address we use is 0xF400 0000. Any address over
- * 0xF400 0000 is a pcmcia pseudo address.
+ * 0xF400 0000 is a PCMCIA pseudo address.
*/
- if ((phys_addr >= 0xF4000000) && (phys_addr < 0xFFFFFFFF)) {
+ if ((phys_addr >= 0xF4000000) && (phys_addr < 0xFFFFFFFF))
return (phys_t)(phys_addr << 4);
- }
/* default nop */
return phys_addr;
diff --git a/arch/mips/au1000/common/time.c b/arch/mips/au1000/common/time.c
index bdb6d73b26fb..563d9390a872 100644
--- a/arch/mips/au1000/common/time.c
+++ b/arch/mips/au1000/common/time.c
@@ -25,11 +25,9 @@
*
* Setting up the clock on the MIPS boards.
*
- * Update. Always configure the kernel with CONFIG_NEW_TIME_C. This
- * will use the user interface gettimeofday() functions from the
- * arch/mips/kernel/time.c, and we provide the clock interrupt processing
- * and the timer offset compute functions. If CONFIG_PM is selected,
- * we also ensure the 32KHz timer is available. -- Dan
+ * We provide the clock interrupt processing and the timer offset compute
+ * functions. If CONFIG_PM is selected, we also ensure the 32KHz timer is
+ * available. -- Dan
*/
#include <linux/types.h>
@@ -47,8 +45,7 @@ extern int allow_au1k_wait; /* default off for CP0 Counter */
#if HZ < 100 || HZ > 1000
#error "unsupported HZ value! Must be in [100,1000]"
#endif
-#define MATCH20_INC (328*100/HZ) /* magic number 328 is for HZ=100... */
-extern void startup_match20_interrupt(irq_handler_t handler);
+#define MATCH20_INC (328 * 100 / HZ) /* magic number 328 is for HZ=100... */
static unsigned long last_pc0, last_match20;
#endif
@@ -61,7 +58,7 @@ static irqreturn_t counter0_irq(int irq, void *dev_id)
{
unsigned long pc0;
int time_elapsed;
- static int jiffie_drift = 0;
+ static int jiffie_drift;
if (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20) {
/* should never happen! */
@@ -70,13 +67,11 @@ static irqreturn_t counter0_irq(int irq, void *dev_id)
}
pc0 = au_readl(SYS_TOYREAD);
- if (pc0 < last_match20) {
+ if (pc0 < last_match20)
/* counter overflowed */
time_elapsed = (0xffffffff - last_match20) + pc0;
- }
- else {
+ else
time_elapsed = pc0 - last_match20;
- }
while (time_elapsed > 0) {
do_timer(1);
@@ -92,8 +87,9 @@ static irqreturn_t counter0_irq(int irq, void *dev_id)
au_writel(last_match20 + MATCH20_INC, SYS_TOYMATCH2);
au_sync();
- /* our counter ticks at 10.009765625 ms/tick, we we're running
- * almost 10uS too slow per tick.
+ /*
+ * Our counter ticks at 10.009765625 ms/tick, we we're running
+ * almost 10 uS too slow per tick.
*/
if (jiffie_drift >= 999) {
@@ -117,20 +113,17 @@ struct irqaction counter0_action = {
/* When we wakeup from sleep, we have to "catch up" on all of the
* timer ticks we have missed.
*/
-void
-wakeup_counter0_adjust(void)
+void wakeup_counter0_adjust(void)
{
unsigned long pc0;
int time_elapsed;
pc0 = au_readl(SYS_TOYREAD);
- if (pc0 < last_match20) {
+ if (pc0 < last_match20)
/* counter overflowed */
time_elapsed = (0xffffffff - last_match20) + pc0;
- }
- else {
+ else
time_elapsed = pc0 - last_match20;
- }
while (time_elapsed > 0) {
time_elapsed -= MATCH20_INC;
@@ -143,10 +136,8 @@ wakeup_counter0_adjust(void)
}
-/* This is just for debugging to set the timer for a sleep delay.
-*/
-void
-wakeup_counter0_set(int ticks)
+/* This is just for debugging to set the timer for a sleep delay. */
+void wakeup_counter0_set(int ticks)
{
unsigned long pc0;
@@ -157,21 +148,22 @@ wakeup_counter0_set(int ticks)
}
#endif
-/* I haven't found anyone that doesn't use a 12 MHz source clock,
+/*
+ * I haven't found anyone that doesn't use a 12 MHz source clock,
* but just in case.....
*/
#define AU1000_SRC_CLK 12000000
/*
* We read the real processor speed from the PLL. This is important
- * because it is more accurate than computing it from the 32KHz
+ * because it is more accurate than computing it from the 32 KHz
* counter, if it exists. If we don't have an accurate processor
* speed, all of the peripherals that derive their clocks based on
* this advertised speed will introduce error and sometimes not work
* properly. This function is futher convoluted to still allow configurations
* to do that in case they have really, really old silicon with a
- * write-only PLL register, that we need the 32KHz when power management
- * "wait" is enabled, and we need to detect if the 32KHz isn't present
+ * write-only PLL register, that we need the 32 KHz when power management
+ * "wait" is enabled, and we need to detect if the 32 KHz isn't present
* but requested......got it? :-) -- Dan
*/
unsigned long calc_clock(void)
@@ -182,8 +174,7 @@ unsigned long calc_clock(void)
spin_lock_irqsave(&time_lock, flags);
- /* Power management cares if we don't have a 32KHz counter.
- */
+ /* Power management cares if we don't have a 32 KHz counter. */
no_au1xxx_32khz = 0;
counter = au_readl(SYS_COUNTER_CNTRL);
if (counter & SYS_CNTRL_E0) {
@@ -193,7 +184,7 @@ unsigned long calc_clock(void)
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S);
/* RTC now ticks at 32.768/16 kHz */
- au_writel(trim_divide-1, SYS_RTCTRIM);
+ au_writel(trim_divide - 1, SYS_RTCTRIM);
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S);
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S);
@@ -215,9 +206,11 @@ unsigned long calc_clock(void)
#endif
else
cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * AU1000_SRC_CLK;
+ /* On Alchemy CPU:counter ratio is 1:1 */
mips_hpt_frequency = cpu_speed;
- // Equation: Baudrate = CPU / (SD * 2 * CLKDIV * 16)
- set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL)&0x03) + 2) * 16));
+ /* Equation: Baudrate = CPU / (SD * 2 * CLKDIV * 16) */
+ set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL)
+ & 0x03) + 2) * 16));
spin_unlock_irqrestore(&time_lock, flags);
return cpu_speed;
}
@@ -228,10 +221,10 @@ void __init plat_time_init(void)
est_freq += 5000; /* round */
est_freq -= est_freq%10000;
- printk("CPU frequency %d.%02d MHz\n", est_freq/1000000,
- (est_freq%1000000)*100/1000000);
- set_au1x00_speed(est_freq);
- set_au1x00_lcd_clock(); // program the LCD clock
+ printk(KERN_INFO "CPU frequency %u.%02u MHz\n",
+ est_freq / 1000000, ((est_freq % 1000000) * 100) / 1000000);
+ set_au1x00_speed(est_freq);
+ set_au1x00_lcd_clock(); /* program the LCD clock */
#ifdef CONFIG_PM
/*
@@ -243,30 +236,29 @@ void __init plat_time_init(void)
* counter 0 interrupt as a special irq and it doesn't show
* up under /proc/interrupts.
*
- * Check to ensure we really have a 32KHz oscillator before
+ * Check to ensure we really have a 32 KHz oscillator before
* we do this.
*/
if (no_au1xxx_32khz)
- printk("WARNING: no 32KHz clock found.\n");
+ printk(KERN_WARNING "WARNING: no 32KHz clock found.\n");
else {
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C0S);
au_writel(0, SYS_TOYWRITE);
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C0S);
- au_writel(au_readl(SYS_WAKEMSK) | (1<<8), SYS_WAKEMSK);
+ au_writel(au_readl(SYS_WAKEMSK) | (1 << 8), SYS_WAKEMSK);
au_writel(~0, SYS_WAKESRC);
au_sync();
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20);
- /* setup match20 to interrupt once every HZ */
+ /* Setup match20 to interrupt once every HZ */
last_pc0 = last_match20 = au_readl(SYS_TOYREAD);
au_writel(last_match20 + MATCH20_INC, SYS_TOYMATCH2);
au_sync();
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20);
setup_irq(AU1000_TOY_MATCH2_INT, &counter0_action);
- /* We can use the real 'wait' instruction.
- */
+ /* We can use the real 'wait' instruction. */
allow_au1k_wait = 1;
}
diff --git a/arch/mips/au1000/db1x00/Makefile b/arch/mips/au1000/db1x00/Makefile
index 51d62bd5d900..274db3b55d82 100644
--- a/arch/mips/au1000/db1x00/Makefile
+++ b/arch/mips/au1000/db1x00/Makefile
@@ -1,8 +1,8 @@
#
-# Copyright 2000 MontaVista Software Inc.
-# Author: MontaVista Software, Inc.
-# ppopov@mvista.com or source@mvista.com
+# Copyright 2000, 2008 MontaVista Software Inc.
+# Author: MontaVista Software, Inc. <source@mvista.com>
+#
+# Makefile for the Alchemy Semiconductor DBAu1xx0 boards.
#
-# Makefile for the Alchemy Semiconductor Db1x00 board.
lib-y := init.o board_setup.o irqmap.o
diff --git a/arch/mips/au1000/db1x00/board_setup.c b/arch/mips/au1000/db1x00/board_setup.c
index b7dcbad5c586..9e5ccbbfcedd 100644
--- a/arch/mips/au1000/db1x00/board_setup.c
+++ b/arch/mips/au1000/db1x00/board_setup.c
@@ -3,9 +3,8 @@
* BRIEF MODULE DESCRIPTION
* Alchemy Db1x00 board setup.
*
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2000, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -37,49 +36,49 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
void board_reset(void)
{
- /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
+ /* Hit BCSR.SW_RESET[RESET] */
bcsr->swreset = 0x0000;
}
void __init board_setup(void)
{
- u32 pin_func;
+ u32 pin_func = 0;
- pin_func = 0;
- /* not valid for 1550 */
-
-#if defined(CONFIG_IRDA) && (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100))
- /* set IRFIRSEL instead of GPIO15 */
- pin_func = au_readl(SYS_PINFUNC) | (u32)((1<<8));
+ /* Not valid for Au1550 */
+#if defined(CONFIG_IRDA) && \
+ (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100))
+ /* Set IRFIRSEL instead of GPIO15 */
+ pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF;
au_writel(pin_func, SYS_PINFUNC);
- /* power off until the driver is in use */
+ /* Power off until the driver is in use */
bcsr->resets &= ~BCSR_RESETS_IRDA_MODE_MASK;
- bcsr->resets |= BCSR_RESETS_IRDA_MODE_OFF;
+ bcsr->resets |= BCSR_RESETS_IRDA_MODE_OFF;
au_sync();
#endif
bcsr->pcmcia = 0x0000; /* turn off PCMCIA power */
#ifdef CONFIG_MIPS_MIRAGE
- /* enable GPIO[31:0] inputs */
+ /* Enable GPIO[31:0] inputs */
au_writel(0, SYS_PININPUTEN);
- /* GPIO[20] is output, tristate the other input primary GPIO's */
- au_writel((u32)(~(1<<20)), SYS_TRIOUTCLR);
+ /* GPIO[20] is output, tristate the other input primary GPIOs */
+ au_writel(~(1 << 20), SYS_TRIOUTCLR);
- /* set GPIO[210:208] instead of SSI_0 */
- pin_func = au_readl(SYS_PINFUNC) | (u32)(1);
+ /* Set GPIO[210:208] instead of SSI_0 */
+ pin_func = au_readl(SYS_PINFUNC) | SYS_PF_S0;
- /* set GPIO[215:211] for LED's */
- pin_func |= (u32)((5<<2));
+ /* Set GPIO[215:211] for LEDs */
+ pin_func |= 5 << 2;
- /* set GPIO[214:213] for more LED's */
- pin_func |= (u32)((5<<12));
+ /* Set GPIO[214:213] for more LEDs */
+ pin_func |= 5 << 12;
- /* set GPIO[207:200] instead of PCMCIA/LCD */
- pin_func |= (u32)((3<<17));
+ /* Set GPIO[207:200] instead of PCMCIA/LCD */
+ pin_func |= SYS_PF_LCD | SYS_PF_PC;
au_writel(pin_func, SYS_PINFUNC);
- /* Enable speaker amplifier. This should
+ /*
+ * Enable speaker amplifier. This should
* be part of the audio driver.
*/
au_writel(au_readl(GPIO2_DIR) | 0x200, GPIO2_DIR);
@@ -89,21 +88,21 @@ void __init board_setup(void)
au_sync();
#ifdef CONFIG_MIPS_DB1000
- printk("AMD Alchemy Au1000/Db1000 Board\n");
+ printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n");
#endif
#ifdef CONFIG_MIPS_DB1500
- printk("AMD Alchemy Au1500/Db1500 Board\n");
+ printk(KERN_INFO "AMD Alchemy Au1500/Db1500 Board\n");
#endif
#ifdef CONFIG_MIPS_DB1100
- printk("AMD Alchemy Au1100/Db1100 Board\n");
+ printk(KERN_INFO "AMD Alchemy Au1100/Db1100 Board\n");
#endif
#ifdef CONFIG_MIPS_BOSPORUS
- printk("AMD Alchemy Bosporus Board\n");
+ printk(KERN_INFO "AMD Alchemy Bosporus Board\n");
#endif
#ifdef CONFIG_MIPS_MIRAGE
- printk("AMD Alchemy Mirage Board\n");
+ printk(KERN_INFO "AMD Alchemy Mirage Board\n");
#endif
#ifdef CONFIG_MIPS_DB1550
- printk("AMD Alchemy Au1550/Db1550 Board\n");
+ printk(KERN_INFO "AMD Alchemy Au1550/Db1550 Board\n");
#endif
}
diff --git a/arch/mips/au1000/db1x00/init.c b/arch/mips/au1000/db1x00/init.c
index d3b967caf70c..5ebe0de5e459 100644
--- a/arch/mips/au1000/db1x00/init.c
+++ b/arch/mips/au1000/db1x00/init.c
@@ -2,9 +2,8 @@
* BRIEF MODULE DESCRIPTION
* PB1000 board setup
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -49,8 +48,8 @@ void __init prom_init(void)
unsigned long memsize;
prom_argc = fw_arg0;
- prom_argv = (char **) fw_arg1;
- prom_envp = (char **) fw_arg2;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg2;
prom_init_cmdline();
@@ -58,6 +57,6 @@ void __init prom_init(void)
if (!memsize_str)
memsize = 0x04000000;
else
- memsize = simple_strtol(memsize_str, NULL, 0);
+ memsize = strict_strtol(memsize_str, 0, NULL);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
diff --git a/arch/mips/au1000/db1x00/irqmap.c b/arch/mips/au1000/db1x00/irqmap.c
index eaa50c7b6341..94c090e8bf7a 100644
--- a/arch/mips/au1000/db1x00/irqmap.c
+++ b/arch/mips/au1000/db1x00/irqmap.c
@@ -32,32 +32,32 @@
#ifdef CONFIG_MIPS_DB1500
char irq_tab_alchemy[][5] __initdata = {
- [12] = { -1, INTA, INTX, INTX, INTX}, /* IDSEL 12 - HPT371 */
- [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */
+ [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT371 */
+ [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
};
#endif
#ifdef CONFIG_MIPS_BOSPORUS
char irq_tab_alchemy[][5] __initdata = {
- [11] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 11 - miniPCI */
- [12] = { -1, INTA, INTX, INTX, INTX}, /* IDSEL 12 - SN1741 */
- [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */
+ [11] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 11 - miniPCI */
+ [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - SN1741 */
+ [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
};
#endif
#ifdef CONFIG_MIPS_MIRAGE
char irq_tab_alchemy[][5] __initdata = {
- [11] = { -1, INTD, INTX, INTX, INTX}, /* IDSEL 11 - SMI VGX */
- [12] = { -1, INTX, INTX, INTC, INTX}, /* IDSEL 12 - PNX1300 */
- [13] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 13 - miniPCI */
+ [11] = { -1, INTD, INTX, INTX, INTX }, /* IDSEL 11 - SMI VGX */
+ [12] = { -1, INTX, INTX, INTC, INTX }, /* IDSEL 12 - PNX1300 */
+ [13] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 13 - miniPCI */
};
#endif
#ifdef CONFIG_MIPS_DB1550
char irq_tab_alchemy[][5] __initdata = {
- [11] = { -1, INTC, INTX, INTX, INTX}, /* IDSEL 11 - on-board HPT371 */
- [12] = { -1, INTB, INTC, INTD, INTA}, /* IDSEL 12 - PCI slot 2 (left) */
- [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot 1 (right) */
+ [11] = { -1, INTC, INTX, INTX, INTX }, /* IDSEL 11 - on-board HPT371 */
+ [12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */
+ [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */
};
#endif
diff --git a/arch/mips/au1000/mtx-1/Makefile b/arch/mips/au1000/mtx-1/Makefile
index 85a90941de4f..7c67b3d33bec 100644
--- a/arch/mips/au1000/mtx-1/Makefile
+++ b/arch/mips/au1000/mtx-1/Makefile
@@ -1,7 +1,6 @@
#
# Copyright 2003 MontaVista Software Inc.
-# Author: MontaVista Software, Inc.
-# ppopov@mvista.com or source@mvista.com
+# Author: MontaVista Software, Inc. <source@mvista.com>
# Bruno Randolf <bruno.randolf@4g-systems.biz>
#
# Makefile for 4G Systems MTX-1 board.
diff --git a/arch/mips/au1000/mtx-1/board_setup.c b/arch/mips/au1000/mtx-1/board_setup.c
index 5736354829c6..3f8079186cf2 100644
--- a/arch/mips/au1000/mtx-1/board_setup.c
+++ b/arch/mips/au1000/mtx-1/board_setup.c
@@ -3,9 +3,8 @@
* BRIEF MODULE DESCRIPTION
* 4G Systems MTX-1 board setup.
*
- * Copyright 2003 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2003, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
* Bruno Randolf <bruno.randolf@4g-systems.biz>
*
* This program is free software; you can redistribute it and/or modify it
@@ -34,7 +33,7 @@
#include <asm/mach-au1x00/au1000.h>
extern int (*board_pci_idsel)(unsigned int devsel, int assert);
-int mtx1_pci_idsel(unsigned int devsel, int assert);
+int mtx1_pci_idsel(unsigned int devsel, int assert);
void board_reset(void)
{
@@ -45,36 +44,36 @@ void board_reset(void)
void __init board_setup(void)
{
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
- // enable USB power switch
- au_writel( au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR );
- au_writel( 0x100000, GPIO2_OUTPUT );
+ /* Enable USB power switch */
+ au_writel(au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR);
+ au_writel(0x100000, GPIO2_OUTPUT);
#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
#ifdef CONFIG_PCI
#if defined(__MIPSEB__)
- au_writel(0xf | (2<<6) | (1<<4), Au1500_PCI_CFG);
+ au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG);
#else
au_writel(0xf, Au1500_PCI_CFG);
#endif
#endif
- // initialize sys_pinfunc:
- au_writel( SYS_PF_NI2, SYS_PINFUNC );
+ /* Initialize sys_pinfunc */
+ au_writel(SYS_PF_NI2, SYS_PINFUNC);
- // initialize GPIO
- au_writel( 0xFFFFFFFF, SYS_TRIOUTCLR );
- au_writel( 0x00000001, SYS_OUTPUTCLR ); // set M66EN (PCI 66MHz) to OFF
- au_writel( 0x00000008, SYS_OUTPUTSET ); // set PCI CLKRUN# to OFF
- au_writel( 0x00000002, SYS_OUTPUTSET ); // set EXT_IO3 ON
- au_writel( 0x00000020, SYS_OUTPUTCLR ); // set eth PHY TX_ER to OFF
+ /* Initialize GPIO */
+ au_writel(0xFFFFFFFF, SYS_TRIOUTCLR);
+ au_writel(0x00000001, SYS_OUTPUTCLR); /* set M66EN (PCI 66MHz) to OFF */
+ au_writel(0x00000008, SYS_OUTPUTSET); /* set PCI CLKRUN# to OFF */
+ au_writel(0x00000002, SYS_OUTPUTSET); /* set EXT_IO3 ON */
+ au_writel(0x00000020, SYS_OUTPUTCLR); /* set eth PHY TX_ER to OFF */
- // enable LED and set it to green
- au_writel( au_readl(GPIO2_DIR) | 0x1800, GPIO2_DIR );
- au_writel( 0x18000800, GPIO2_OUTPUT );
+ /* Enable LED and set it to green */
+ au_writel(au_readl(GPIO2_DIR) | 0x1800, GPIO2_DIR);
+ au_writel(0x18000800, GPIO2_OUTPUT);
board_pci_idsel = mtx1_pci_idsel;
- printk("4G Systems MTX-1 Board\n");
+ printk(KERN_INFO "4G Systems MTX-1 Board\n");
}
int
@@ -82,20 +81,18 @@ mtx1_pci_idsel(unsigned int devsel, int assert)
{
#define MTX_IDSEL_ONLY_0_AND_3 0
#if MTX_IDSEL_ONLY_0_AND_3
- if (devsel != 0 && devsel != 3) {
- printk("*** not 0 or 3\n");
- return 0;
- }
+ if (devsel != 0 && devsel != 3) {
+ printk(KERN_ERR "*** not 0 or 3\n");
+ return 0;
+ }
#endif
- if (assert && devsel != 0) {
- // suppress signal to cardbus
- au_writel( 0x00000002, SYS_OUTPUTCLR ); // set EXT_IO3 OFF
- }
- else {
- au_writel( 0x00000002, SYS_OUTPUTSET ); // set EXT_IO3 ON
- }
- au_sync_udelay(1);
- return 1;
+ if (assert && devsel != 0)
+ /* Suppress signal to Cardbus */
+ au_writel(0x00000002, SYS_OUTPUTCLR); /* set EXT_IO3 OFF */
+ else
+ au_writel(0x00000002, SYS_OUTPUTSET); /* set EXT_IO3 ON */
+ au_sync_udelay(1);
+ return 1;
}
diff --git a/arch/mips/au1000/mtx-1/init.c b/arch/mips/au1000/mtx-1/init.c
index c015cbce1cca..33a4aebe0cba 100644
--- a/arch/mips/au1000/mtx-1/init.c
+++ b/arch/mips/au1000/mtx-1/init.c
@@ -3,9 +3,8 @@
* BRIEF MODULE DESCRIPTION
* 4G Systems MTX-1 board setup
*
- * Copyright 2003 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2003, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
* Bruno Randolf <bruno.randolf@4g-systems.biz>
*
* This program is free software; you can redistribute it and/or modify it
@@ -47,8 +46,8 @@ void __init prom_init(void)
unsigned long memsize;
prom_argc = fw_arg0;
- prom_argv = (char **) fw_arg1;
- prom_envp = (char **) fw_arg2;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg2;
prom_init_cmdline();
@@ -56,6 +55,6 @@ void __init prom_init(void)
if (!memsize_str)
memsize = 0x04000000;
else
- memsize = simple_strtol(memsize_str, NULL, 0);
+ memsize = strict_strtol(memsize_str, 0, NULL);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
diff --git a/arch/mips/au1000/mtx-1/irqmap.c b/arch/mips/au1000/mtx-1/irqmap.c
index 78d70c42c9db..f2bf02951e9c 100644
--- a/arch/mips/au1000/mtx-1/irqmap.c
+++ b/arch/mips/au1000/mtx-1/irqmap.c
@@ -31,18 +31,18 @@
#include <asm/mach-au1x00/au1000.h>
char irq_tab_alchemy[][5] __initdata = {
- [0] = { -1, INTA, INTA, INTX, INTX}, /* IDSEL 00 - AdapterA-Slot0 (top) */
- [1] = { -1, INTB, INTA, INTX, INTX}, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
- [2] = { -1, INTC, INTD, INTX, INTX}, /* IDSEL 02 - AdapterB-Slot0 (top) */
- [3] = { -1, INTD, INTC, INTX, INTX}, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
- [4] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 04 - AdapterC-Slot0 (top) */
- [5] = { -1, INTB, INTA, INTX, INTX}, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
- [6] = { -1, INTC, INTD, INTX, INTX}, /* IDSEL 06 - AdapterD-Slot0 (top) */
- [7] = { -1, INTD, INTC, INTX, INTX}, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
+ [0] = { -1, INTA, INTA, INTX, INTX }, /* IDSEL 00 - AdapterA-Slot0 (top) */
+ [1] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
+ [2] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 02 - AdapterB-Slot0 (top) */
+ [3] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
+ [4] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 04 - AdapterC-Slot0 (top) */
+ [5] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
+ [6] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 06 - AdapterD-Slot0 (top) */
+ [7] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
};
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
- { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
+ { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 },
{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
diff --git a/arch/mips/au1000/mtx-1/platform.c b/arch/mips/au1000/mtx-1/platform.c
index a7edbf0829ac..9807be37c32f 100644
--- a/arch/mips/au1000/mtx-1/platform.c
+++ b/arch/mips/au1000/mtx-1/platform.c
@@ -21,11 +21,10 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
+#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
-#include <asm/gpio.h>
-
static struct gpio_keys_button mtx1_gpio_button[] = {
{
.gpio = 207,
diff --git a/arch/mips/au1000/pb1000/Makefile b/arch/mips/au1000/pb1000/Makefile
index daa1a507e72f..99bbec0ca41b 100644
--- a/arch/mips/au1000/pb1000/Makefile
+++ b/arch/mips/au1000/pb1000/Makefile
@@ -1,8 +1,8 @@
#
-# Copyright 2000 MontaVista Software Inc.
-# Author: MontaVista Software, Inc.
-# ppopov@mvista.com or source@mvista.com
+# Copyright 2000, 2008 MontaVista Software Inc.
+# Author: MontaVista Software, Inc. <source@mvista.com>
+#
+# Makefile for the Alchemy Semiconductor Pb1000 board.
#
-# Makefile for the Alchemy Semiconductor PB1000 board.
lib-y := init.o board_setup.o irqmap.o
diff --git a/arch/mips/au1000/pb1000/board_setup.c b/arch/mips/au1000/pb1000/board_setup.c
index 33f15acc1b17..25df167a95b3 100644
--- a/arch/mips/au1000/pb1000/board_setup.c
+++ b/arch/mips/au1000/pb1000/board_setup.c
@@ -1,7 +1,6 @@
/*
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2000, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -40,128 +39,126 @@ void __init board_setup(void)
u32 sys_freqctrl, sys_clksrc;
u32 prid = read_c0_prid();
- // set AUX clock to 12MHz * 8 = 96 MHz
+ /* Set AUX clock to 12 MHz * 8 = 96 MHz */
au_writel(8, SYS_AUXPLL);
au_writel(0, SYS_PINSTATERD);
udelay(100);
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
- /* zero and disable FREQ2 */
+ /* Zero and disable FREQ2 */
sys_freqctrl = au_readl(SYS_FREQCTRL0);
sys_freqctrl &= ~0xFFF00000;
au_writel(sys_freqctrl, SYS_FREQCTRL0);
- /* zero and disable USBH/USBD clocks */
+ /* Zero and disable USBH/USBD clocks */
sys_clksrc = au_readl(SYS_CLKSRC);
- sys_clksrc &= ~0x00007FE0;
+ sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK |
+ SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK);
au_writel(sys_clksrc, SYS_CLKSRC);
sys_freqctrl = au_readl(SYS_FREQCTRL0);
sys_freqctrl &= ~0xFFF00000;
sys_clksrc = au_readl(SYS_CLKSRC);
- sys_clksrc &= ~0x00007FE0;
+ sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK |
+ SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK);
- switch (prid & 0x000000FF)
- {
+ switch (prid & 0x000000FF) {
case 0x00: /* DA */
case 0x01: /* HA */
case 0x02: /* HB */
- /* CPU core freq to 48MHz to slow it way down... */
- au_writel(4, SYS_CPUPLL);
+ /* CPU core freq to 48 MHz to slow it way down... */
+ au_writel(4, SYS_CPUPLL);
- /*
- * Setup 48MHz FREQ2 from CPUPLL for USB Host
- */
- /* FRDIV2=3 -> div by 8 of 384MHz -> 48MHz */
- sys_freqctrl |= ((3<<22) | (1<<21) | (0<<20));
- au_writel(sys_freqctrl, SYS_FREQCTRL0);
+ /*
+ * Setup 48 MHz FREQ2 from CPUPLL for USB Host
+ * FRDIV2 = 3 -> div by 8 of 384 MHz -> 48 MHz
+ */
+ sys_freqctrl |= (3 << SYS_FC_FRDIV2_BIT) | SYS_FC_FE2;
+ au_writel(sys_freqctrl, SYS_FREQCTRL0);
- /* CPU core freq to 384MHz */
- au_writel(0x20, SYS_CPUPLL);
+ /* CPU core freq to 384 MHz */
+ au_writel(0x20, SYS_CPUPLL);
- printk("Au1000: 48MHz OHCI workaround enabled\n");
+ printk(KERN_INFO "Au1000: 48 MHz OHCI workaround enabled\n");
break;
- default: /* HC and newer */
- // FREQ2 = aux/2 = 48 MHz
- sys_freqctrl |= ((0<<22) | (1<<21) | (1<<20));
- au_writel(sys_freqctrl, SYS_FREQCTRL0);
+ default: /* HC and newer */
+ /* FREQ2 = aux / 2 = 48 MHz */
+ sys_freqctrl |= (0 << SYS_FC_FRDIV2_BIT) |
+ SYS_FC_FE2 | SYS_FC_FS2;
+ au_writel(sys_freqctrl, SYS_FREQCTRL0);
break;
}
/*
- * Route 48MHz FREQ2 into USB Host and/or Device
+ * Route 48 MHz FREQ2 into USB Host and/or Device
*/
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
- sys_clksrc |= ((4<<12) | (0<<11) | (0<<10));
-#endif
+ sys_clksrc |= SYS_CS_MUX_FQ2 << SYS_CS_MUH_BIT;
au_writel(sys_clksrc, SYS_CLKSRC);
- // configure pins GPIO[14:9] as GPIO
- pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8080);
+ /* Configure pins GPIO[14:9] as GPIO */
+ pin_func = au_readl(SYS_PINFUNC) & ~(SYS_PF_UR3 | SYS_PF_USB);
- // 2nd USB port is USB host
- pin_func |= 0x8000;
+ /* 2nd USB port is USB host */
+ pin_func |= SYS_PF_USB;
au_writel(pin_func, SYS_PINFUNC);
au_writel(0x2800, SYS_TRIOUTCLR);
au_writel(0x0030, SYS_OUTPUTCLR);
#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
- // make gpio 15 an input (for interrupt line)
- pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x100);
- // we don't need I2S, so make it available for GPIO[31:29]
- pin_func |= (1<<5);
+ /* Make GPIO 15 an input (for interrupt line) */
+ pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_IRF;
+ /* We don't need I2S, so make it available for GPIO[31:29] */
+ pin_func |= SYS_PF_I2S;
au_writel(pin_func, SYS_PINFUNC);
au_writel(0x8000, SYS_TRIOUTCLR);
- static_cfg0 = au_readl(MEM_STCFG0) & (u32)(~0xc00);
+ static_cfg0 = au_readl(MEM_STCFG0) & ~0xc00;
au_writel(static_cfg0, MEM_STCFG0);
- // configure RCE2* for LCD
+ /* configure RCE2* for LCD */
au_writel(0x00000004, MEM_STCFG2);
- // MEM_STTIME2
+ /* MEM_STTIME2 */
au_writel(0x09000000, MEM_STTIME2);
- // Set 32-bit base address decoding for RCE2*
+ /* Set 32-bit base address decoding for RCE2* */
au_writel(0x10003ff0, MEM_STADDR2);
- // PCI CPLD setup
- // expand CE0 to cover PCI
+ /*
+ * PCI CPLD setup
+ * Expand CE0 to cover PCI
+ */
au_writel(0x11803e40, MEM_STADDR1);
- // burst visibility on
+ /* Burst visibility on */
au_writel(au_readl(MEM_STCFG0) | 0x1000, MEM_STCFG0);
- au_writel(0x83, MEM_STCFG1); // ewait enabled, flash timing
- au_writel(0x33030a10, MEM_STTIME1); // slower timing for FPGA
+ au_writel(0x83, MEM_STCFG1); /* ewait enabled, flash timing */
+ au_writel(0x33030a10, MEM_STTIME1); /* slower timing for FPGA */
- /* setup the static bus controller */
+ /* Setup the static bus controller */
au_writel(0x00000002, MEM_STCFG3); /* type = PCMCIA */
au_writel(0x280E3D07, MEM_STTIME3); /* 250ns cycle time */
au_writel(0x10000000, MEM_STADDR3); /* any PCMCIA select */
-#ifdef CONFIG_PCI
- au_writel(0, PCI_BRIDGE_CONFIG); // set extend byte to 0
- au_writel(0, SDRAM_MBAR); // set mbar to 0
- au_writel(0x2, SDRAM_CMD); // enable memory accesses
- au_sync_delay(1);
-#endif
-
- /* Enable Au1000 BCLK switching - note: sed1356 must not use
- * its BCLK (Au1000 LCLK) for any timings */
- switch (prid & 0x000000FF)
- {
+ /*
+ * Enable Au1000 BCLK switching - note: sed1356 must not use
+ * its BCLK (Au1000 LCLK) for any timings
+ */
+ switch (prid & 0x000000FF) {
case 0x00: /* DA */
case 0x01: /* HA */
case 0x02: /* HB */
break;
default: /* HC and newer */
- /* Enable sys bus clock divider when IDLE state or no bus
- activity. */
+ /*
+ * Enable sys bus clock divider when IDLE state or no bus
+ * activity.
+ */
au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL);
break;
}
diff --git a/arch/mips/au1000/pb1000/init.c b/arch/mips/au1000/pb1000/init.c
index 549447df71d6..3837365d613d 100644
--- a/arch/mips/au1000/pb1000/init.c
+++ b/arch/mips/au1000/pb1000/init.c
@@ -1,10 +1,9 @@
/*
* BRIEF MODULE DESCRIPTION
- * PB1000 board setup
+ * Pb1000 board setup
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -44,16 +43,15 @@ void __init prom_init(void)
unsigned char *memsize_str;
unsigned long memsize;
- prom_argc = (int) fw_arg0;
- prom_argv = (char **) fw_arg1;
- prom_envp = (char **) fw_arg2;
+ prom_argc = (int)fw_arg0;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg2;
prom_init_cmdline();
memsize_str = prom_getenv("memsize");
- if (!memsize_str) {
+ if (!memsize_str)
memsize = 0x04000000;
- } else {
- memsize = simple_strtol(memsize_str, NULL, 0);
- }
+ else
+ memsize = strict_strtol(memsize_str, 0, NULL);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
diff --git a/arch/mips/au1000/pb1100/Makefile b/arch/mips/au1000/pb1100/Makefile
index 996236df6375..793e97c49e46 100644
--- a/arch/mips/au1000/pb1100/Makefile
+++ b/arch/mips/au1000/pb1100/Makefile
@@ -1,8 +1,8 @@
#
-# Copyright 2000,2001 MontaVista Software Inc.
-# Author: MontaVista Software, Inc.
-# ppopov@mvista.com or source@mvista.com
+# Copyright 2000, 2001, 2008 MontaVista Software Inc.
+# Author: MontaVista Software, Inc. <source@mvista.com>
#
# Makefile for the Alchemy Semiconductor Pb1100 board.
+#
lib-y := init.o board_setup.o irqmap.o
diff --git a/arch/mips/au1000/pb1100/board_setup.c b/arch/mips/au1000/pb1100/board_setup.c
index 656164c8e9ca..c0bfd59a7a36 100644
--- a/arch/mips/au1000/pb1100/board_setup.c
+++ b/arch/mips/au1000/pb1100/board_setup.c
@@ -1,7 +1,6 @@
/*
- * Copyright 2002 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2002, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -32,15 +31,15 @@
void board_reset(void)
{
- /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
- au_writel(0x00000000, 0xAE00001C);
+ /* Hit BCSR.RST_VDDI[SOFT_RESET] */
+ au_writel(0x00000000, PB1100_RST_VDDI);
}
void __init board_setup(void)
{
- volatile void __iomem * base = (volatile void __iomem *) 0xac000000UL;
+ volatile void __iomem *base = (volatile void __iomem *)0xac000000UL;
- // set AUX clock to 12MHz * 8 = 96 MHz
+ /* Set AUX clock to 12 MHz * 8 = 96 MHz */
au_writel(8, SYS_AUXPLL);
au_writel(0, SYS_PININPUTEN);
udelay(100);
@@ -49,44 +48,47 @@ void __init board_setup(void)
{
u32 pin_func, sys_freqctrl, sys_clksrc;
- // configure pins GPIO[14:9] as GPIO
- pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x80);
+ /* Configure pins GPIO[14:9] as GPIO */
+ pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_UR3;
- /* zero and disable FREQ2 */
+ /* Zero and disable FREQ2 */
sys_freqctrl = au_readl(SYS_FREQCTRL0);
sys_freqctrl &= ~0xFFF00000;
au_writel(sys_freqctrl, SYS_FREQCTRL0);
- /* zero and disable USBH/USBD/IrDA clock */
+ /* Zero and disable USBH/USBD/IrDA clock */
sys_clksrc = au_readl(SYS_CLKSRC);
- sys_clksrc &= ~0x0000001F;
+ sys_clksrc &= ~(SYS_CS_CIR | SYS_CS_DIR | SYS_CS_MIR_MASK);
au_writel(sys_clksrc, SYS_CLKSRC);
sys_freqctrl = au_readl(SYS_FREQCTRL0);
sys_freqctrl &= ~0xFFF00000;
sys_clksrc = au_readl(SYS_CLKSRC);
- sys_clksrc &= ~0x0000001F;
+ sys_clksrc &= ~(SYS_CS_CIR | SYS_CS_DIR | SYS_CS_MIR_MASK);
- // FREQ2 = aux/2 = 48 MHz
- sys_freqctrl |= ((0<<22) | (1<<21) | (1<<20));
+ /* FREQ2 = aux / 2 = 48 MHz */
+ sys_freqctrl |= (0 << SYS_FC_FRDIV2_BIT) |
+ SYS_FC_FE2 | SYS_FC_FS2;
au_writel(sys_freqctrl, SYS_FREQCTRL0);
/*
- * Route 48MHz FREQ2 into USBH/USBD/IrDA
+ * Route 48 MHz FREQ2 into USBH/USBD/IrDA
*/
- sys_clksrc |= ((4<<2) | (0<<1) | 0 );
+ sys_clksrc |= SYS_CS_MUX_FQ2 << SYS_CS_MIR_BIT;
au_writel(sys_clksrc, SYS_CLKSRC);
- /* setup the static bus controller */
+ /* Setup the static bus controller */
au_writel(0x00000002, MEM_STCFG3); /* type = PCMCIA */
au_writel(0x280E3D07, MEM_STTIME3); /* 250ns cycle time */
au_writel(0x10000000, MEM_STADDR3); /* any PCMCIA select */
- // get USB Functionality pin state (device vs host drive pins)
- pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000);
- // 2nd USB port is USB host
- pin_func |= 0x8000;
+ /*
+ * Get USB Functionality pin state (device vs host drive pins).
+ */
+ pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_USB;
+ /* 2nd USB port is USB host. */
+ pin_func |= SYS_PF_USB;
au_writel(pin_func, SYS_PINFUNC);
}
#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
@@ -94,12 +96,12 @@ void __init board_setup(void)
/* Enable sys bus clock divider when IDLE state or no bus activity. */
au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL);
- // Enable the RTC if not already enabled
+ /* Enable the RTC if not already enabled. */
if (!(readb(base + 0x28) & 0x20)) {
writeb(readb(base + 0x28) | 0x20, base + 0x28);
au_sync();
}
- // Put the clock in BCD mode
+ /* Put the clock in BCD mode. */
if (readb(base + 0x2C) & 0x4) { /* reg B */
writeb(readb(base + 0x2c) & ~0x4, base + 0x2c);
au_sync();
diff --git a/arch/mips/au1000/pb1100/init.c b/arch/mips/au1000/pb1100/init.c
index c91344648ed3..8355483f3de2 100644
--- a/arch/mips/au1000/pb1100/init.c
+++ b/arch/mips/au1000/pb1100/init.c
@@ -3,9 +3,8 @@
* BRIEF MODULE DESCRIPTION
* Pb1100 board setup
*
- * Copyright 2002 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2002, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -46,8 +45,8 @@ void __init prom_init(void)
unsigned long memsize;
prom_argc = fw_arg0;
- prom_argv = (char **) fw_arg1;
- prom_envp = (char **) fw_arg3;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg3;
prom_init_cmdline();
@@ -55,7 +54,7 @@ void __init prom_init(void)
if (!memsize_str)
memsize = 0x04000000;
else
- memsize = simple_strtol(memsize_str, NULL, 0);
+ memsize = strict_strtol(memsize_str, 0, NULL);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
diff --git a/arch/mips/au1000/pb1100/irqmap.c b/arch/mips/au1000/pb1100/irqmap.c
index b5021e3d477f..9b7dd8b41283 100644
--- a/arch/mips/au1000/pb1100/irqmap.c
+++ b/arch/mips/au1000/pb1100/irqmap.c
@@ -1,6 +1,6 @@
/*
* BRIEF MODULE DESCRIPTION
- * Au1xxx irq map table
+ * Au1xx0 IRQ map table
*
* Copyright 2003 Embedded Edge, LLC
* dan@embeddededge.com
@@ -31,10 +31,10 @@
#include <asm/mach-au1x00/au1000.h>
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
- { AU1000_GPIO_9, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card Fully_Interted#
- { AU1000_GPIO_10, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card STSCHG#
- { AU1000_GPIO_11, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card IRQ#
- { AU1000_GPIO_13, INTC_INT_LOW_LEVEL, 0 }, // DC_IRQ#
+ { AU1000_GPIO_9, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card Fully_Inserted# */
+ { AU1000_GPIO_10, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card STSCHG# */
+ { AU1000_GPIO_11, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card IRQ# */
+ { AU1000_GPIO_13, INTC_INT_LOW_LEVEL, 0 }, /* DC_IRQ# */
};
int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
diff --git a/arch/mips/au1000/pb1200/Makefile b/arch/mips/au1000/pb1200/Makefile
index 4fe02ea65a60..d678adf7ce85 100644
--- a/arch/mips/au1000/pb1200/Makefile
+++ b/arch/mips/au1000/pb1200/Makefile
@@ -1,5 +1,5 @@
#
-# Makefile for the Alchemy Semiconductor PB1200 board.
+# Makefile for the Alchemy Semiconductor Pb1200/DBAu1200 boards.
#
lib-y := init.o board_setup.o irqmap.o
diff --git a/arch/mips/au1000/pb1200/board_setup.c b/arch/mips/au1000/pb1200/board_setup.c
index 4493a792cc4c..6cb2115059ad 100644
--- a/arch/mips/au1000/pb1200/board_setup.c
+++ b/arch/mips/au1000/pb1200/board_setup.c
@@ -27,16 +27,8 @@
#include <linux/init.h>
#include <linux/sched.h>
-#include <au1000.h>
#include <prom.h>
-
-#ifdef CONFIG_MIPS_PB1200
-#include <asm/mach-pb1x00/pb1200.h>
-#endif
-
-#ifdef CONFIG_MIPS_DB1200
-#include <asm/mach-db1x00/db1200.h>
-#endif
+#include <au1xxx.h>
extern void _board_init_irq(void);
extern void (*board_init_irq)(void);
@@ -53,56 +45,57 @@ void __init board_setup(void)
#if 0
{
- u32 pin_func;
-
- /* Enable PSC1 SYNC for AC97. Normaly done in audio driver,
- * but it is board specific code, so put it here.
- */
- pin_func = au_readl(SYS_PINFUNC);
- au_sync();
- pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
- au_writel(pin_func, SYS_PINFUNC);
-
- au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */
- au_sync();
+ u32 pin_func;
+
+ /*
+ * Enable PSC1 SYNC for AC97. Normaly done in audio driver,
+ * but it is board specific code, so put it here.
+ */
+ pin_func = au_readl(SYS_PINFUNC);
+ au_sync();
+ pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
+ au_writel(pin_func, SYS_PINFUNC);
+
+ au_writel(0, (u32)bcsr | 0x10); /* turn off PCMCIA power */
+ au_sync();
}
#endif
#if defined(CONFIG_I2C_AU1550)
{
- u32 freq0, clksrc;
- u32 pin_func;
-
- /* Select SMBUS in CPLD */
- bcsr->resets &= ~(BCSR_RESETS_PCS0MUX);
-
- pin_func = au_readl(SYS_PINFUNC);
- au_sync();
- pin_func &= ~(3<<17 | 1<<4);
- /* Set GPIOs correctly */
- pin_func |= 2<<17;
- au_writel(pin_func, SYS_PINFUNC);
- au_sync();
-
- /* The i2c driver depends on 50Mhz clock */
- freq0 = au_readl(SYS_FREQCTRL0);
- au_sync();
- freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1);
- freq0 |= (3<<SYS_FC_FRDIV1_BIT);
- /* 396Mhz / (3+1)*2 == 49.5Mhz */
- au_writel(freq0, SYS_FREQCTRL0);
- au_sync();
- freq0 |= SYS_FC_FE1;
- au_writel(freq0, SYS_FREQCTRL0);
- au_sync();
-
- clksrc = au_readl(SYS_CLKSRC);
- au_sync();
- clksrc &= ~0x01f00000;
- /* bit 22 is EXTCLK0 for PSC0 */
- clksrc |= (0x3 << 22);
- au_writel(clksrc, SYS_CLKSRC);
- au_sync();
+ u32 freq0, clksrc;
+ u32 pin_func;
+
+ /* Select SMBus in CPLD */
+ bcsr->resets &= ~BCSR_RESETS_PCS0MUX;
+
+ pin_func = au_readl(SYS_PINFUNC);
+ au_sync();
+ pin_func &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B);
+ /* Set GPIOs correctly */
+ pin_func |= 2 << 17;
+ au_writel(pin_func, SYS_PINFUNC);
+ au_sync();
+
+ /* The I2C driver depends on 50 MHz clock */
+ freq0 = au_readl(SYS_FREQCTRL0);
+ au_sync();
+ freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1);
+ freq0 |= 3 << SYS_FC_FRDIV1_BIT;
+ /* 396 MHz / (3 + 1) * 2 == 49.5 MHz */
+ au_writel(freq0, SYS_FREQCTRL0);
+ au_sync();
+ freq0 |= SYS_FC_FE1;
+ au_writel(freq0, SYS_FREQCTRL0);
+ au_sync();
+
+ clksrc = au_readl(SYS_CLKSRC);
+ au_sync();
+ clksrc &= ~(SYS_CS_CE0 | SYS_CS_DE0 | SYS_CS_ME0_MASK);
+ /* Bit 22 is EXTCLK0 for PSC0 */
+ clksrc |= SYS_CS_MUX_FQ1 << SYS_CS_ME0_BIT;
+ au_writel(clksrc, SYS_CLKSRC);
+ au_sync();
}
#endif
@@ -116,27 +109,27 @@ void __init board_setup(void)
#endif
#endif
- /* The Pb1200 development board uses external MUX for PSC0 to
- support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI
- */
+ /*
+ * The Pb1200 development board uses external MUX for PSC0 to
+ * support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI
+ */
#ifdef CONFIG_I2C_AU1550
- bcsr->resets &= (~BCSR_RESETS_PCS0MUX);
+ bcsr->resets &= ~BCSR_RESETS_PCS0MUX;
#endif
au_sync();
#ifdef CONFIG_MIPS_PB1200
- printk("AMD Alchemy Pb1200 Board\n");
+ printk(KERN_INFO "AMD Alchemy Pb1200 Board\n");
#endif
#ifdef CONFIG_MIPS_DB1200
- printk("AMD Alchemy Db1200 Board\n");
+ printk(KERN_INFO "AMD Alchemy Db1200 Board\n");
#endif
/* Setup Pb1200 External Interrupt Controller */
board_init_irq = _board_init_irq;
}
-int
-board_au1200fb_panel(void)
+int board_au1200fb_panel(void)
{
BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
int p;
@@ -147,23 +140,23 @@ board_au1200fb_panel(void)
return p;
}
-int
-board_au1200fb_panel_init(void)
+int board_au1200fb_panel_init(void)
{
/* Apply power */
- BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
- bcsr->board |= (BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL);
- /*printk("board_au1200fb_panel_init()\n"); */
+ BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+
+ bcsr->board |= BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL;
+ /* printk(KERN_DEBUG "board_au1200fb_panel_init()\n"); */
return 0;
}
-int
-board_au1200fb_panel_shutdown(void)
+int board_au1200fb_panel_shutdown(void)
{
/* Remove power */
- BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
- bcsr->board &= ~(BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL);
- /*printk("board_au1200fb_panel_shutdown()\n"); */
+ BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+
+ bcsr->board &= ~(BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
+ BCSR_BOARD_LCDBL);
+ /* printk(KERN_DEBUG "board_au1200fb_panel_shutdown()\n"); */
return 0;
}
-
diff --git a/arch/mips/au1000/pb1200/init.c b/arch/mips/au1000/pb1200/init.c
index 72af5500660b..09fd63b86062 100644
--- a/arch/mips/au1000/pb1200/init.c
+++ b/arch/mips/au1000/pb1200/init.c
@@ -3,9 +3,8 @@
* BRIEF MODULE DESCRIPTION
* PB1200 board setup
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -45,16 +44,15 @@ void __init prom_init(void)
unsigned char *memsize_str;
unsigned long memsize;
- prom_argc = (int) fw_arg0;
- prom_argv = (char **) fw_arg1;
- prom_envp = (char **) fw_arg2;
+ prom_argc = (int)fw_arg0;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg2;
prom_init_cmdline();
memsize_str = prom_getenv("memsize");
- if (!memsize_str) {
+ if (!memsize_str)
memsize = 0x08000000;
- } else {
- memsize = simple_strtol(memsize_str, NULL, 0);
- }
+ else
+ memsize = strict_strtol(memsize_str, 0, NULL);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
diff --git a/arch/mips/au1000/pb1200/irqmap.c b/arch/mips/au1000/pb1200/irqmap.c
index e61eb8e0b76b..2a505ad8715b 100644
--- a/arch/mips/au1000/pb1200/irqmap.c
+++ b/arch/mips/au1000/pb1200/irqmap.c
@@ -39,25 +39,25 @@
#endif
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
- { AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 }, // This is exteranl interrupt cascade
+ /* This is external interrupt cascade */
+ { AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 },
};
int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
/*
- * Support for External interrupts on the PbAu1200 Development platform.
+ * Support for External interrupts on the Pb1200 Development platform.
*/
-static volatile int pb1200_cascade_en=0;
+static volatile int pb1200_cascade_en;
-irqreturn_t pb1200_cascade_handler( int irq, void *dev_id)
+irqreturn_t pb1200_cascade_handler(int irq, void *dev_id)
{
unsigned short bisr = bcsr->int_status;
int extirq_nr = 0;
- /* Clear all the edge interrupts. This has no effect on level */
+ /* Clear all the edge interrupts. This has no effect on level. */
bcsr->int_status = bisr;
- for( ; bisr; bisr &= (bisr-1) )
- {
+ for ( ; bisr; bisr &= bisr - 1) {
extirq_nr = PB1200_INT_BEGIN + __ffs(bisr);
/* Ack and dispatch IRQ */
do_IRQ(extirq_nr);
@@ -68,26 +68,20 @@ irqreturn_t pb1200_cascade_handler( int irq, void *dev_id)
inline void pb1200_enable_irq(unsigned int irq_nr)
{
- bcsr->intset_mask = 1<<(irq_nr - PB1200_INT_BEGIN);
- bcsr->intset = 1<<(irq_nr - PB1200_INT_BEGIN);
+ bcsr->intset_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
+ bcsr->intset = 1 << (irq_nr - PB1200_INT_BEGIN);
}
inline void pb1200_disable_irq(unsigned int irq_nr)
{
- bcsr->intclr_mask = 1<<(irq_nr - PB1200_INT_BEGIN);
- bcsr->intclr = 1<<(irq_nr - PB1200_INT_BEGIN);
+ bcsr->intclr_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
+ bcsr->intclr = 1 << (irq_nr - PB1200_INT_BEGIN);
}
static unsigned int pb1200_setup_cascade(void)
{
- int err;
-
- err = request_irq(AU1000_GPIO_7, &pb1200_cascade_handler,
- 0, "Pb1200 Cascade", &pb1200_cascade_handler);
- if (err)
- return err;
-
- return 0;
+ return request_irq(AU1000_GPIO_7, &pb1200_cascade_handler,
+ 0, "Pb1200 Cascade", &pb1200_cascade_handler);
}
static unsigned int pb1200_startup_irq(unsigned int irq)
@@ -132,23 +126,23 @@ void _board_init_irq(void)
unsigned int irq;
#ifdef CONFIG_MIPS_PB1200
- /* We have a problem with CPLD rev3. Enable a workaround */
+ /* We have a problem with CPLD rev 3. */
if (((bcsr->whoami & BCSR_WHOAMI_CPLD) >> 4) <= 3) {
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("Pb1200 must be at CPLD rev4. Please have Pb1200\n");
- printk("updated to latest revision. This software will not\n");
- printk("work on anything less than CPLD rev4\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "Pb1200 must be at CPLD rev 4. Please have Pb1200\n");
+ printk(KERN_ERR "updated to latest revision. This software will\n");
+ printk(KERN_ERR "not work on anything less than CPLD rev 4.\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
panic("Game over. Your score is 0.");
}
#endif
@@ -161,6 +155,6 @@ void _board_init_irq(void)
/*
* GPIO_7 can not be hooked here, so it is hooked upon first
- * request of any source attached to the cascade
+ * request of any source attached to the cascade.
*/
}
diff --git a/arch/mips/au1000/pb1500/Makefile b/arch/mips/au1000/pb1500/Makefile
index 97a730813cd3..602f38df20bb 100644
--- a/arch/mips/au1000/pb1500/Makefile
+++ b/arch/mips/au1000/pb1500/Makefile
@@ -1,8 +1,8 @@
#
-# Copyright 2000,2001 MontaVista Software Inc.
-# Author: MontaVista Software, Inc.
-# ppopov@mvista.com or source@mvista.com
+# Copyright 2000, 2001, 2008 MontaVista Software Inc.
+# Author: MontaVista Software, Inc. <source@mvista.com>
#
# Makefile for the Alchemy Semiconductor Pb1500 board.
+#
lib-y := init.o board_setup.o irqmap.o
diff --git a/arch/mips/au1000/pb1500/board_setup.c b/arch/mips/au1000/pb1500/board_setup.c
index 24c652e8ec4b..035771c6e5b8 100644
--- a/arch/mips/au1000/pb1500/board_setup.c
+++ b/arch/mips/au1000/pb1500/board_setup.c
@@ -1,7 +1,6 @@
/*
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2000, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -32,8 +31,8 @@
void board_reset(void)
{
- /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
- au_writel(0x00000000, 0xAE00001C);
+ /* Hit BCSR.RST_VDDI[SOFT_RESET] */
+ au_writel(0x00000000, PB1500_RST_VDDI);
}
void __init board_setup(void)
@@ -42,7 +41,7 @@ void __init board_setup(void)
u32 sys_freqctrl, sys_clksrc;
sys_clksrc = sys_freqctrl = pin_func = 0;
- // set AUX clock to 12MHz * 8 = 96 MHz
+ /* Set AUX clock to 12 MHz * 8 = 96 MHz */
au_writel(8, SYS_AUXPLL);
au_writel(0, SYS_PINSTATERD);
udelay(100);
@@ -51,51 +50,48 @@ void __init board_setup(void)
/* GPIO201 is input for PCMCIA card detect */
/* GPIO203 is input for PCMCIA interrupt request */
- au_writel(au_readl(GPIO2_DIR) & (u32)(~((1<<1)|(1<<3))), GPIO2_DIR);
+ au_writel(au_readl(GPIO2_DIR) & ~((1 << 1) | (1 << 3)), GPIO2_DIR);
- /* zero and disable FREQ2 */
+ /* Zero and disable FREQ2 */
sys_freqctrl = au_readl(SYS_FREQCTRL0);
sys_freqctrl &= ~0xFFF00000;
au_writel(sys_freqctrl, SYS_FREQCTRL0);
/* zero and disable USBH/USBD clocks */
sys_clksrc = au_readl(SYS_CLKSRC);
- sys_clksrc &= ~0x00007FE0;
+ sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK |
+ SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK);
au_writel(sys_clksrc, SYS_CLKSRC);
sys_freqctrl = au_readl(SYS_FREQCTRL0);
sys_freqctrl &= ~0xFFF00000;
sys_clksrc = au_readl(SYS_CLKSRC);
- sys_clksrc &= ~0x00007FE0;
+ sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK |
+ SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK);
- // FREQ2 = aux/2 = 48 MHz
- sys_freqctrl |= ((0<<22) | (1<<21) | (1<<20));
+ /* FREQ2 = aux/2 = 48 MHz */
+ sys_freqctrl |= (0 << SYS_FC_FRDIV2_BIT) | SYS_FC_FE2 | SYS_FC_FS2;
au_writel(sys_freqctrl, SYS_FREQCTRL0);
/*
* Route 48MHz FREQ2 into USB Host and/or Device
*/
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
- sys_clksrc |= ((4<<12) | (0<<11) | (0<<10));
-#endif
+ sys_clksrc |= SYS_CS_MUX_FQ2 << SYS_CS_MUH_BIT;
au_writel(sys_clksrc, SYS_CLKSRC);
-
- pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000);
- // 2nd USB port is USB host
- pin_func |= 0x8000;
+ pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_USB;
+ /* 2nd USB port is USB host */
+ pin_func |= SYS_PF_USB;
au_writel(pin_func, SYS_PINFUNC);
#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
-
-
#ifdef CONFIG_PCI
- // Setup PCI bus controller
+ /* Setup PCI bus controller */
au_writel(0, Au1500_PCI_CMEM);
au_writel(0x00003fff, Au1500_CFG_BASE);
#if defined(__MIPSEB__)
- au_writel(0xf | (2<<6) | (1<<4), Au1500_PCI_CFG);
+ au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG);
#else
au_writel(0xf, Au1500_PCI_CFG);
#endif
@@ -112,11 +108,11 @@ void __init board_setup(void)
/* Enable the RTC if not already enabled */
if (!(au_readl(0xac000028) & 0x20)) {
- printk("enabling clock ...\n");
+ printk(KERN_INFO "enabling clock ...\n");
au_writel((au_readl(0xac000028) | 0x20), 0xac000028);
}
/* Put the clock in BCD mode */
- if (au_readl(0xac00002C) & 0x4) { /* reg B */
+ if (au_readl(0xac00002c) & 0x4) { /* reg B */
au_writel(au_readl(0xac00002c) & ~0x4, 0xac00002c);
au_sync();
}
diff --git a/arch/mips/au1000/pb1500/init.c b/arch/mips/au1000/pb1500/init.c
index 488507c07db9..49f51e165863 100644
--- a/arch/mips/au1000/pb1500/init.c
+++ b/arch/mips/au1000/pb1500/init.c
@@ -1,11 +1,10 @@
/*
*
* BRIEF MODULE DESCRIPTION
- * PB1500 board setup
+ * Pb1500 board setup
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -45,16 +44,15 @@ void __init prom_init(void)
unsigned char *memsize_str;
unsigned long memsize;
- prom_argc = (int) fw_arg0;
- prom_argv = (char **) fw_arg1;
- prom_envp = (char **) fw_arg2;
+ prom_argc = (int)fw_arg0;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg2;
prom_init_cmdline();
memsize_str = prom_getenv("memsize");
- if (!memsize_str) {
+ if (!memsize_str)
memsize = 0x04000000;
- } else {
- memsize = simple_strtol(memsize_str, NULL, 0);
- }
+ else
+ memsize = strict_strtol(memsize_str, 0, NULL);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
diff --git a/arch/mips/au1000/pb1500/irqmap.c b/arch/mips/au1000/pb1500/irqmap.c
index 4817ab44d07f..39c4682766a8 100644
--- a/arch/mips/au1000/pb1500/irqmap.c
+++ b/arch/mips/au1000/pb1500/irqmap.c
@@ -31,12 +31,12 @@
#include <asm/mach-au1x00/au1000.h>
char irq_tab_alchemy[][5] __initdata = {
- [12] = { -1, INTA, INTX, INTX, INTX}, /* IDSEL 12 - HPT370 */
- [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */
+ [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT370 */
+ [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
};
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
- { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
+ { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 },
{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
diff --git a/arch/mips/au1000/pb1550/Makefile b/arch/mips/au1000/pb1550/Makefile
index aa35bc6cb8cf..7d8beca87fa5 100644
--- a/arch/mips/au1000/pb1550/Makefile
+++ b/arch/mips/au1000/pb1550/Makefile
@@ -1,9 +1,8 @@
#
-# Copyright 2000 MontaVista Software Inc.
-# Author: MontaVista Software, Inc.
-# ppopov@mvista.com or source@mvista.com
+# Copyright 2000, 2008 MontaVista Software Inc.
+# Author: MontaVista Software, Inc. <source@mvista.com>
#
-# Makefile for the Alchemy Semiconductor PB1000 board.
+# Makefile for the Alchemy Semiconductor Pb1550 board.
#
lib-y := init.o board_setup.o irqmap.o
diff --git a/arch/mips/au1000/pb1550/board_setup.c b/arch/mips/au1000/pb1550/board_setup.c
index 45d60872b565..0ed76b64b6ab 100644
--- a/arch/mips/au1000/pb1550/board_setup.c
+++ b/arch/mips/au1000/pb1550/board_setup.c
@@ -3,9 +3,8 @@
* BRIEF MODULE DESCRIPTION
* Alchemy Pb1550 board setup.
*
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2000, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -35,15 +34,16 @@
void board_reset(void)
{
- /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
- au_writew(au_readw(0xAF00001C) & ~(1<<15), 0xAF00001C);
+ /* Hit BCSR.SYSTEM[RESET] */
+ au_writew(au_readw(0xAF00001C) & ~BCSR_SYSTEM_RESET, 0xAF00001C);
}
void __init board_setup(void)
{
u32 pin_func;
- /* Enable PSC1 SYNC for AC97. Normaly done in audio driver,
+ /*
+ * Enable PSC1 SYNC for AC'97. Normaly done in audio driver,
* but it is board specific code, so put it here.
*/
pin_func = au_readl(SYS_PINFUNC);
@@ -51,8 +51,8 @@ void __init board_setup(void)
pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
au_writel(pin_func, SYS_PINFUNC);
- au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */
+ au_writel(0, (u32)bcsr | 0x10); /* turn off PCMCIA power */
au_sync();
- printk("AMD Alchemy Pb1550 Board\n");
+ printk(KERN_INFO "AMD Alchemy Pb1550 Board\n");
}
diff --git a/arch/mips/au1000/pb1550/init.c b/arch/mips/au1000/pb1550/init.c
index f6b2fc587980..1b5f58434bb7 100644
--- a/arch/mips/au1000/pb1550/init.c
+++ b/arch/mips/au1000/pb1550/init.c
@@ -1,11 +1,10 @@
/*
*
* BRIEF MODULE DESCRIPTION
- * PB1550 board setup
+ * Pb1550 board setup
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -45,16 +44,15 @@ void __init prom_init(void)
unsigned char *memsize_str;
unsigned long memsize;
- prom_argc = (int) fw_arg0;
- prom_argv = (char **) fw_arg1;
- prom_envp = (char **) fw_arg2;
+ prom_argc = (int)fw_arg0;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg2;
prom_init_cmdline();
memsize_str = prom_getenv("memsize");
- if (!memsize_str) {
+ if (!memsize_str)
memsize = 0x08000000;
- } else {
- memsize = simple_strtol(memsize_str, NULL, 0);
- }
+ else
+ memsize = strict_strtol(memsize_str, 0, NULL);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
diff --git a/arch/mips/au1000/pb1550/irqmap.c b/arch/mips/au1000/pb1550/irqmap.c
index e1dac37af08a..a02a4d1fa899 100644
--- a/arch/mips/au1000/pb1550/irqmap.c
+++ b/arch/mips/au1000/pb1550/irqmap.c
@@ -1,6 +1,6 @@
/*
* BRIEF MODULE DESCRIPTION
- * Au1xxx irq map table
+ * Au1xx0 IRQ map table
*
* Copyright 2003 Embedded Edge, LLC
* dan@embeddededge.com
@@ -31,8 +31,8 @@
#include <asm/mach-au1x00/au1000.h>
char irq_tab_alchemy[][5] __initdata = {
- [12] = { -1, INTB, INTC, INTD, INTA}, /* IDSEL 12 - PCI slot 2 (left) */
- [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot 1 (right) */
+ [12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */
+ [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */
};
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
diff --git a/arch/mips/au1000/xxs1500/Makefile b/arch/mips/au1000/xxs1500/Makefile
index 44d7f7056ae7..db3c526f64d8 100644
--- a/arch/mips/au1000/xxs1500/Makefile
+++ b/arch/mips/au1000/xxs1500/Makefile
@@ -1,7 +1,6 @@
#
# Copyright 2003 MontaVista Software Inc.
-# Author: MontaVista Software, Inc.
-# ppopov@mvista.com or source@mvista.com
+# Author: MontaVista Software, Inc. <source@mvista.com>
#
# Makefile for MyCable XXS1500 board.
#
diff --git a/arch/mips/au1000/xxs1500/board_setup.c b/arch/mips/au1000/xxs1500/board_setup.c
index 79d1798621bf..4c587acac5c3 100644
--- a/arch/mips/au1000/xxs1500/board_setup.c
+++ b/arch/mips/au1000/xxs1500/board_setup.c
@@ -1,7 +1,6 @@
/*
- * Copyright 2000-2003 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2000-2003, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -39,40 +38,40 @@ void __init board_setup(void)
{
u32 pin_func;
- // set multiple use pins (UART3/GPIO) to UART (it's used as UART too)
- pin_func = au_readl(SYS_PINFUNC) & (u32)(~SYS_PF_UR3);
+ /* Set multiple use pins (UART3/GPIO) to UART (it's used as UART too) */
+ pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_UR3;
pin_func |= SYS_PF_UR3;
au_writel(pin_func, SYS_PINFUNC);
- // enable UART
- au_writel(0x01, UART3_ADDR+UART_MOD_CNTRL); // clock enable (CE)
+ /* Enable UART */
+ au_writel(0x01, UART3_ADDR + UART_MOD_CNTRL); /* clock enable (CE) */
mdelay(10);
- au_writel(0x03, UART3_ADDR+UART_MOD_CNTRL); // CE and "enable"
+ au_writel(0x03, UART3_ADDR + UART_MOD_CNTRL); /* CE and "enable" */
mdelay(10);
- // enable DTR = USB power up
- au_writel(0x01, UART3_ADDR+UART_MCR); //? UART_MCR_DTR is 0x01???
+ /* Enable DTR = USB power up */
+ au_writel(0x01, UART3_ADDR + UART_MCR); /* UART_MCR_DTR is 0x01??? */
#ifdef CONFIG_PCMCIA_XXS1500
- /* setup pcmcia signals */
+ /* Setup PCMCIA signals */
au_writel(0, SYS_PININPUTEN);
- /* gpio 0, 1, and 4 are inputs */
- au_writel(1 | (1<<1) | (1<<4), SYS_TRIOUTCLR);
+ /* GPIO 0, 1, and 4 are inputs */
+ au_writel(1 | (1 << 1) | (1 << 4), SYS_TRIOUTCLR);
- /* enable GPIO2 if not already enabled */
+ /* Enable GPIO2 if not already enabled */
au_writel(1, GPIO2_ENABLE);
- /* gpio2 208/9/10/11 are inputs */
- au_writel((1<<8) | (1<<9) | (1<<10) | (1<<11), GPIO2_DIR);
+ /* GPIO2 208/9/10/11 are inputs */
+ au_writel((1 << 8) | (1 << 9) | (1 << 10) | (1 << 11), GPIO2_DIR);
- /* turn off power */
- au_writel((au_readl(GPIO2_PINSTATE) & ~(1<<14))|(1<<30), GPIO2_OUTPUT);
+ /* Turn off power */
+ au_writel((au_readl(GPIO2_PINSTATE) & ~(1 << 14)) | (1 << 30),
+ GPIO2_OUTPUT);
#endif
-
#ifdef CONFIG_PCI
#if defined(__MIPSEB__)
- au_writel(0xf | (2<<6) | (1<<4), Au1500_PCI_CFG);
+ au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG);
#else
au_writel(0xf, Au1500_PCI_CFG);
#endif
diff --git a/arch/mips/au1000/xxs1500/init.c b/arch/mips/au1000/xxs1500/init.c
index 24fc6e132dc0..b849bf501c04 100644
--- a/arch/mips/au1000/xxs1500/init.c
+++ b/arch/mips/au1000/xxs1500/init.c
@@ -2,9 +2,8 @@
* BRIEF MODULE DESCRIPTION
* XXS1500 board setup
*
- * Copyright 2003 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2003, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -45,8 +44,8 @@ void __init prom_init(void)
unsigned long memsize;
prom_argc = fw_arg0;
- prom_argv = (char **) fw_arg1;
- prom_envp = (char **) fw_arg2;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg2;
prom_init_cmdline();
@@ -54,6 +53,6 @@ void __init prom_init(void)
if (!memsize_str)
memsize = 0x04000000;
else
- memsize = simple_strtol(memsize_str, NULL, 0);
+ memsize = strict_strtol(memsize_str, 0, NULL);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
diff --git a/arch/mips/au1000/xxs1500/irqmap.c b/arch/mips/au1000/xxs1500/irqmap.c
index dd6e3d1eb4d4..edf06ed11870 100644
--- a/arch/mips/au1000/xxs1500/irqmap.c
+++ b/arch/mips/au1000/xxs1500/irqmap.c
@@ -31,7 +31,7 @@
#include <asm/mach-au1x00/au1000.h>
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
- { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
+ { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 },
{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
diff --git a/arch/mips/emma2rh/markeins/setup.c b/arch/mips/emma2rh/markeins/setup.c
index 82f9e9013e70..62bfb455d1b1 100644
--- a/arch/mips/emma2rh/markeins/setup.c
+++ b/arch/mips/emma2rh/markeins/setup.c
@@ -76,7 +76,9 @@ static void markeins_machine_power_off(void)
while (1) ;
}
-static unsigned long clock[4] = { 166500000, 187312500, 199800000, 210600000 };
+static unsigned long __initdata emma2rh_clock[4] = {
+ 166500000, 187312500, 199800000, 210600000
+};
static unsigned int __init detect_bus_frequency(unsigned long rtc_base)
{
@@ -85,7 +87,8 @@ static unsigned int __init detect_bus_frequency(unsigned long rtc_base)
/* detect from boot strap */
reg = emma2rh_in32(EMMA2RH_BHIF_STRAP_0);
reg = (reg >> 4) & 0x3;
- return clock[reg];
+
+ return emma2rh_clock[reg];
}
void __init plat_time_init(void)
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 45545be3eb86..cc0244036aec 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -56,9 +56,9 @@ obj-$(CONFIG_MIPS_MT_SMP) += smp-mt.o
obj-$(CONFIG_MIPS_CMP) += smp-cmp.o
obj-$(CONFIG_CPU_MIPSR2) += spram.o
-obj-$(CONFIG_MIPS_APSP_KSPD) += kspd.o
obj-$(CONFIG_MIPS_VPE_LOADER) += vpe.o
obj-$(CONFIG_MIPS_VPE_APSP_API) += rtlx.o
+obj-$(CONFIG_MIPS_APSP_KSPD) += kspd.o
obj-$(CONFIG_I8259) += i8259.o
obj-$(CONFIG_IRQ_CPU) += irq_cpu.o
diff --git a/arch/mips/kernel/cpu-bugs64.c b/arch/mips/kernel/cpu-bugs64.c
index a1b48af0992f..02b7713cf71c 100644
--- a/arch/mips/kernel/cpu-bugs64.c
+++ b/arch/mips/kernel/cpu-bugs64.c
@@ -38,7 +38,7 @@ static inline void align_mod(const int align, const int mod)
".endr\n\t"
".set pop"
:
- : GCC_IMM_ASM(align), GCC_IMM_ASM(mod));
+ : GCC_IMM_ASM() (align), GCC_IMM_ASM() (mod));
}
static inline void mult_sh_align_mod(long *v1, long *v2, long *w,
diff --git a/arch/mips/kernel/irixelf.c b/arch/mips/kernel/irixelf.c
index 290d8e3a664d..469c7237e5ba 100644
--- a/arch/mips/kernel/irixelf.c
+++ b/arch/mips/kernel/irixelf.c
@@ -578,7 +578,7 @@ static inline int map_interpreter(struct elf_phdr *epp, struct elfhdr *ihp,
* process and the system, here we map the page and fill the
* structure
*/
-static void irix_map_prda_page(void)
+static int irix_map_prda_page(void)
{
unsigned long v;
struct prda *pp;
@@ -587,8 +587,8 @@ static void irix_map_prda_page(void)
v = do_brk(PRDA_ADDRESS, PAGE_SIZE);
up_write(&current->mm->mmap_sem);
- if (v < 0)
- return;
+ if (v != PRDA_ADDRESS)
+ return v; /* v must be an error code */
pp = (struct prda *) v;
pp->prda_sys.t_pid = task_pid_vnr(current);
@@ -596,6 +596,8 @@ static void irix_map_prda_page(void)
pp->prda_sys.t_rpid = task_pid_vnr(current);
/* We leave the rest set to zero */
+
+ return 0;
}
@@ -781,7 +783,8 @@ static int load_irix_binary(struct linux_binprm * bprm, struct pt_regs * regs)
* IRIX maps a page at 0x200000 which holds some system
* information. Programs depend on this.
*/
- irix_map_prda_page();
+ if (irix_map_prda_page())
+ goto out_free_dentry;
padzero(elf_bss);
diff --git a/arch/mips/kernel/kspd.c b/arch/mips/kernel/kspd.c
index ceb62dce1c9c..b0591ae0ce56 100644
--- a/arch/mips/kernel/kspd.c
+++ b/arch/mips/kernel/kspd.c
@@ -257,7 +257,7 @@ void sp_work_handle_request(void)
vcwd = vpe_getcwd(tclimit);
- /* change to the cwd of the process that loaded the SP program */
+ /* change to cwd of the process that loaded the SP program */
old_fs = get_fs();
set_fs(KERNEL_DS);
sys_chdir(vcwd);
@@ -323,6 +323,9 @@ static void sp_cleanup(void)
set >>= 1;
}
}
+
+ /* Put daemon cwd back to root to avoid umount problems */
+ sys_chdir("/");
}
static int channel_open = 0;
diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c
index 0233798f7155..b88f1c18ff4d 100644
--- a/arch/mips/kernel/rtlx.c
+++ b/arch/mips/kernel/rtlx.c
@@ -72,6 +72,15 @@ static void rtlx_dispatch(void)
static irqreturn_t rtlx_interrupt(int irq, void *dev_id)
{
int i;
+ unsigned int flags, vpeflags;
+
+ /* Ought not to be strictly necessary for SMTC builds */
+ local_irq_save(flags);
+ vpeflags = dvpe();
+ set_c0_status(0x100 << MIPS_CPU_RTLX_IRQ);
+ irq_enable_hazard();
+ evpe(vpeflags);
+ local_irq_restore(flags);
for (i = 0; i < RTLX_CHANNELS; i++) {
wake_up(&channel_wqs[i].lx_queue);
@@ -108,7 +117,8 @@ static void __used dump_rtlx(void)
static int rtlx_init(struct rtlx_info *rtlxi)
{
if (rtlxi->id != RTLX_ID) {
- printk(KERN_ERR "no valid RTLX id at 0x%p 0x%lx\n", rtlxi, rtlxi->id);
+ printk(KERN_ERR "no valid RTLX id at 0x%p 0x%lx\n",
+ rtlxi, rtlxi->id);
return -ENOEXEC;
}
@@ -162,18 +172,17 @@ int rtlx_open(int index, int can_sleep)
if (rtlx == NULL) {
if( (p = vpe_get_shared(tclimit)) == NULL) {
- if (can_sleep) {
- __wait_event_interruptible(channel_wqs[index].lx_queue,
- (p = vpe_get_shared(tclimit)),
- ret);
- if (ret)
- goto out_fail;
- } else {
- printk(KERN_DEBUG "No SP program loaded, and device "
- "opened with O_NONBLOCK\n");
- ret = -ENOSYS;
+ if (can_sleep) {
+ __wait_event_interruptible(channel_wqs[index].lx_queue,
+ (p = vpe_get_shared(tclimit)), ret);
+ if (ret)
goto out_fail;
- }
+ } else {
+ printk(KERN_DEBUG "No SP program loaded, and device "
+ "opened with O_NONBLOCK\n");
+ ret = -ENOSYS;
+ goto out_fail;
+ }
}
smp_rmb();
@@ -182,7 +191,9 @@ int rtlx_open(int index, int can_sleep)
DEFINE_WAIT(wait);
for (;;) {
- prepare_to_wait(&channel_wqs[index].lx_queue, &wait, TASK_INTERRUPTIBLE);
+ prepare_to_wait(
+ &channel_wqs[index].lx_queue,
+ &wait, TASK_INTERRUPTIBLE);
smp_rmb();
if (*p != NULL)
break;
@@ -195,7 +206,7 @@ int rtlx_open(int index, int can_sleep)
}
finish_wait(&channel_wqs[index].lx_queue, &wait);
} else {
- printk(" *vpe_get_shared is NULL. "
+ pr_err(" *vpe_get_shared is NULL. "
"Has an SP program been loaded?\n");
ret = -ENOSYS;
goto out_fail;
@@ -203,8 +214,9 @@ int rtlx_open(int index, int can_sleep)
}
if ((unsigned int)*p < KSEG0) {
- printk(KERN_WARNING "vpe_get_shared returned an invalid pointer "
- "maybe an error code %d\n", (int)*p);
+ printk(KERN_WARNING "vpe_get_shared returned an "
+ "invalid pointer maybe an error code %d\n",
+ (int)*p);
ret = -ENOSYS;
goto out_fail;
}
@@ -232,6 +244,10 @@ out_ret:
int rtlx_release(int index)
{
+ if (rtlx == NULL) {
+ pr_err("rtlx_release() with null rtlx\n");
+ return 0;
+ }
rtlx->channel[index].lx_state = RTLX_STATE_UNUSED;
return 0;
}
@@ -251,8 +267,8 @@ unsigned int rtlx_read_poll(int index, int can_sleep)
int ret = 0;
__wait_event_interruptible(channel_wqs[index].lx_queue,
- chan->lx_read != chan->lx_write || sp_stopping,
- ret);
+ (chan->lx_read != chan->lx_write) ||
+ sp_stopping, ret);
if (ret)
return ret;
@@ -282,7 +298,9 @@ static inline int write_spacefree(int read, int write, int size)
unsigned int rtlx_write_poll(int index)
{
struct rtlx_channel *chan = &rtlx->channel[index];
- return write_spacefree(chan->rt_read, chan->rt_write, chan->buffer_size);
+
+ return write_spacefree(chan->rt_read, chan->rt_write,
+ chan->buffer_size);
}
ssize_t rtlx_read(int index, void __user *buff, size_t count)
@@ -344,8 +362,8 @@ ssize_t rtlx_write(int index, const void __user *buffer, size_t count)
rt_read = rt->rt_read;
/* total number of bytes to copy */
- count = min(count,
- (size_t)write_spacefree(rt_read, rt->rt_write, rt->buffer_size));
+ count = min(count, (size_t)write_spacefree(rt_read, rt->rt_write,
+ rt->buffer_size));
/* first bit from write pointer to the end of the buffer, or count */
fl = min(count, (size_t) rt->buffer_size - rt->rt_write);
@@ -514,6 +532,11 @@ static int __init rtlx_module_init(void)
if (cpu_has_vint)
set_vi_handler(MIPS_CPU_RTLX_IRQ, rtlx_dispatch);
+ else {
+ pr_err("APRP RTLX init on non-vectored-interrupt processor\n");
+ err = -ENODEV;
+ goto out_chrdev;
+ }
rtlx_irq.dev_id = rtlx;
setup_irq(rtlx_irq_num, &rtlx_irq);
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 39f3dfe134fb..c6a063b2a0d9 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -331,6 +331,7 @@ static void __init bootmem_init(void)
/*
* Determine low and high memory ranges
*/
+ max_pfn = max_low_pfn;
if (max_low_pfn > PFN_DOWN(HIGHMEM_START)) {
#ifdef CONFIG_HIGHMEM
highstart_pfn = PFN_DOWN(HIGHMEM_START);
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index 33780cc61ce9..63370cdd3c90 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -87,8 +87,8 @@ struct plat_smp_ops *mp_ops;
__cpuinit void register_smp_ops(struct plat_smp_ops *ops)
{
- if (ops)
- printk(KERN_WARNING "Overriding previous set SMP ops\n");
+ if (mp_ops)
+ printk(KERN_WARNING "Overriding previously set SMP ops\n");
mp_ops = ops;
}
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index 39804c584edd..2794501ff302 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -269,7 +269,7 @@ static void *alloc_progmem(unsigned long len)
* This means you must tell Linux to use less memory than you
* physically have, for example by passing a mem= boot argument.
*/
- addr = pfn_to_kaddr(max_pfn);
+ addr = pfn_to_kaddr(max_low_pfn);
memset(addr, 0, len);
#else
/* simple grab some mem for now */
@@ -781,10 +781,15 @@ static int vpe_run(struct vpe * v)
/* take system out of configuration state */
clear_c0_mvpcontrol(MVPCONTROL_VPC);
+ /*
+ * SMTC/SMVP kernels manage VPE enable independently,
+ * but uniprocessor kernels need to turn it on, even
+ * if that wasn't the pre-dvpe() state.
+ */
#ifdef CONFIG_SMP
- evpe(EVPE_ENABLE);
-#else
evpe(vpeflags);
+#else
+ evpe(EVPE_ENABLE);
#endif
emt(dmt_flag);
local_irq_restore(flags);
@@ -840,7 +845,7 @@ static int vpe_elfload(struct vpe * v)
/* Sanity checks against insmoding binaries or wrong arch,
weird elf version */
- if (memcmp(hdr->e_ident, ELFMAG, 4) != 0
+ if (memcmp(hdr->e_ident, ELFMAG, SELFMAG) != 0
|| (hdr->e_type != ET_REL && hdr->e_type != ET_EXEC)
|| !elf_check_arch(hdr)
|| hdr->e_shentsize != sizeof(*sechdrs)) {
@@ -947,12 +952,14 @@ static int vpe_elfload(struct vpe * v)
struct elf_phdr *phdr = (struct elf_phdr *) ((char *)hdr + hdr->e_phoff);
for (i = 0; i < hdr->e_phnum; i++) {
- if (phdr->p_type != PT_LOAD)
- continue;
-
- memcpy((void *)phdr->p_paddr, (char *)hdr + phdr->p_offset, phdr->p_filesz);
- memset((void *)phdr->p_paddr + phdr->p_filesz, 0, phdr->p_memsz - phdr->p_filesz);
- phdr++;
+ if (phdr->p_type == PT_LOAD) {
+ memcpy((void *)phdr->p_paddr,
+ (char *)hdr + phdr->p_offset,
+ phdr->p_filesz);
+ memset((void *)phdr->p_paddr + phdr->p_filesz,
+ 0, phdr->p_memsz - phdr->p_filesz);
+ }
+ phdr++;
}
for (i = 0; i < hdr->e_shnum; i++) {
@@ -1107,7 +1114,7 @@ static int vpe_release(struct inode *inode, struct file *filp)
return -ENODEV;
hdr = (Elf_Ehdr *) v->pbuffer;
- if (memcmp(hdr->e_ident, ELFMAG, 4) == 0) {
+ if (memcmp(hdr->e_ident, ELFMAG, SELFMAG) == 0) {
if (vpe_elfload(v) >= 0) {
vpe_run(v);
} else {
diff --git a/arch/mips/mm/highmem.c b/arch/mips/mm/highmem.c
index 10dd2af2343b..8f2cd8eda741 100644
--- a/arch/mips/mm/highmem.c
+++ b/arch/mips/mm/highmem.c
@@ -116,4 +116,3 @@ EXPORT_SYMBOL(__kmap);
EXPORT_SYMBOL(__kunmap);
EXPORT_SYMBOL(__kmap_atomic);
EXPORT_SYMBOL(__kunmap_atomic);
-EXPORT_SYMBOL(__kmap_atomic_to_page);
diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c
index da8cbb6899dc..b40df7d2cf44 100644
--- a/arch/mips/oprofile/op_model_mipsxx.c
+++ b/arch/mips/oprofile/op_model_mipsxx.c
@@ -281,7 +281,7 @@ static inline int n_counters(void)
static void reset_counters(void *arg)
{
- int counters = (int)arg;
+ int counters = (int)(long)arg;
switch (counters) {
case 4:
w_c0_perfctrl3(0);
@@ -313,7 +313,7 @@ static int __init mipsxx_init(void)
if (!cpu_has_mipsmt_pertccounters)
counters = counters_total_to_per_cpu(counters);
#endif
- on_each_cpu(reset_counters, (void *)counters, 0, 1);
+ on_each_cpu(reset_counters, (void *)(long)counters, 0, 1);
op_model_mipsxx_ops.num_counters = counters;
switch (current_cpu_type()) {
@@ -382,7 +382,7 @@ static void mipsxx_exit(void)
int counters = op_model_mipsxx_ops.num_counters;
counters = counters_per_cpu_to_total(counters);
- on_each_cpu(reset_counters, (void *)counters, 0, 1);
+ on_each_cpu(reset_counters, (void *)(long)counters, 0, 1);
perf_irq = save_perf_irq;
}
diff --git a/arch/mips/pci/fixup-au1000.c b/arch/mips/pci/fixup-au1000.c
index 00c36c9dbe0e..e2ddfc49237c 100644
--- a/arch/mips/pci/fixup-au1000.c
+++ b/arch/mips/pci/fixup-au1000.c
@@ -1,10 +1,9 @@
/*
* BRIEF MODULE DESCRIPTION
- * Board specific pci fixups.
+ * Board specific PCI fixups.
*
- * Copyright 2001-2003 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001-2003, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
diff --git a/arch/mips/pci/ops-au1000.c b/arch/mips/pci/ops-au1000.c
index 1314bd58f036..9a57c5ab91dd 100644
--- a/arch/mips/pci/ops-au1000.c
+++ b/arch/mips/pci/ops-au1000.c
@@ -1,10 +1,9 @@
/*
* BRIEF MODULE DESCRIPTION
- * Alchemy/AMD Au1x00 PCI support.
+ * Alchemy/AMD Au1xx0 PCI support.
*
- * Copyright 2001-2003, 2007 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001-2003, 2007-2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* Support for all devices (greater than 16) added by David Gathright.
*
@@ -28,6 +27,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
@@ -36,9 +36,9 @@
#include <asm/mach-au1x00/au1000.h>
-#undef DEBUG
-#ifdef DEBUG
-#define DBG(x...) printk(x)
+#undef DEBUG
+#ifdef DEBUG
+#define DBG(x...) printk(KERN_DEBUG x)
#else
#define DBG(x...)
#endif
@@ -46,7 +46,6 @@
#define PCI_ACCESS_READ 0
#define PCI_ACCESS_WRITE 1
-
int (*board_pci_idsel)(unsigned int devsel, int assert);
void mod_wired_entry(int entry, unsigned long entrylo0,
@@ -92,10 +91,9 @@ void __init au1x_pci_cfg_init(void)
}
static int config_access(unsigned char access_type, struct pci_bus *bus,
- unsigned int dev_fn, unsigned char where,
- u32 * data)
+ unsigned int dev_fn, unsigned char where, u32 *data)
{
-#if defined( CONFIG_SOC_AU1500 ) || defined( CONFIG_SOC_AU1550 )
+#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550)
unsigned int device = PCI_SLOT(dev_fn);
unsigned int function = PCI_FUNC(dev_fn);
unsigned long offset, status;
@@ -114,38 +112,36 @@ static int config_access(unsigned char access_type, struct pci_bus *bus,
Au1500_PCI_STATCMD);
au_sync_udelay(1);
- /* Allow board vendors to implement their own off-chip idsel.
+ /*
+ * Allow board vendors to implement their own off-chip IDSEL.
* If it doesn't succeed, may as well bail out at this point.
*/
- if (board_pci_idsel) {
- if (board_pci_idsel(device, 1) == 0) {
- *data = 0xffffffff;
- local_irq_restore(flags);
- return -1;
- }
+ if (board_pci_idsel && board_pci_idsel(device, 1) == 0) {
+ *data = 0xffffffff;
+ local_irq_restore(flags);
+ return -1;
}
- /* setup the config window */
- if (bus->number == 0) {
- cfg_base = ((1<<device)<<11);
- } else {
- cfg_base = 0x80000000 | (bus->number<<16) | (device<<11);
- }
+ /* Setup the config window */
+ if (bus->number == 0)
+ cfg_base = (1 << device) << 11;
+ else
+ cfg_base = 0x80000000 | (bus->number << 16) | (device << 11);
- /* setup the lower bits of the 36 bit address */
- offset = (function << 8) | (where & ~0x3);
- /* pick up any address that falls below the page mask */
+ /* Setup the lower bits of the 36-bit address */
+ offset = (function << 8) | (where & ~0x3);
+ /* Pick up any address that falls below the page mask */
offset |= cfg_base & ~PAGE_MASK;
- /* page boundary */
+ /* Page boundary */
cfg_base = cfg_base & PAGE_MASK;
/*
* To improve performance, if the current device is the same as
* the last device accessed, we don't touch the TLB.
*/
- entryLo0 = (6 << 26) | (cfg_base >> 6) | (2 << 3) | 7;
- entryLo1 = (6 << 26) | (cfg_base >> 6) | (0x1000 >> 6) | (2 << 3) | 7;
+ entryLo0 = (6 << 26) | (cfg_base >> 6) | (2 << 3) | 7;
+ entryLo1 = (6 << 26) | (cfg_base >> 6) | (0x1000 >> 6) | (2 << 3) | 7;
if ((entryLo0 != last_entryLo0) || (entryLo1 != last_entryLo1)) {
mod_wired_entry(pci_cfg_wired_entry, entryLo0, entryLo1,
(unsigned long)pci_cfg_vm->addr, PM_4K);
@@ -153,38 +149,37 @@ static int config_access(unsigned char access_type, struct pci_bus *bus,
last_entryLo1 = entryLo1;
}
- if (access_type == PCI_ACCESS_WRITE) {
+ if (access_type == PCI_ACCESS_WRITE)
au_writel(*data, (int)(pci_cfg_vm->addr + offset));
- } else {
+ else
*data = au_readl((int)(pci_cfg_vm->addr + offset));
- }
+
au_sync_udelay(2);
- DBG("cfg_access %d bus->number %d dev %d at %x *data %x conf %x\n",
- access_type, bus->number, device, where, *data, offset);
+ DBG("cfg_access %d bus->number %u dev %u at %x *data %x conf %lx\n",
+ access_type, bus->number, device, where, *data, offset);
- /* check master abort */
+ /* Check master abort */
status = au_readl(Au1500_PCI_STATCMD);
- if (status & (1<<29)) {
+ if (status & (1 << 29)) {
*data = 0xffffffff;
error = -1;
DBG("Au1x Master Abort\n");
} else if ((status >> 28) & 0xf) {
- DBG("PCI ERR detected: device %d, status %x\n", device, ((status >> 28) & 0xf));
+ DBG("PCI ERR detected: device %u, status %lx\n",
+ device, (status >> 28) & 0xf);
- /* clear errors */
+ /* Clear errors */
au_writel(status & 0xf000ffff, Au1500_PCI_STATCMD);
*data = 0xffffffff;
error = -1;
}
- /* Take away the idsel.
- */
- if (board_pci_idsel) {
+ /* Take away the IDSEL. */
+ if (board_pci_idsel)
(void)board_pci_idsel(device, 0);
- }
local_irq_restore(flags);
return error;
@@ -192,7 +187,7 @@ static int config_access(unsigned char access_type, struct pci_bus *bus,
}
static int read_config_byte(struct pci_bus *bus, unsigned int devfn,
- int where, u8 * val)
+ int where, u8 *val)
{
u32 data;
int ret;
@@ -206,9 +201,8 @@ static int read_config_byte(struct pci_bus *bus, unsigned int devfn,
return ret;
}
-
static int read_config_word(struct pci_bus *bus, unsigned int devfn,
- int where, u16 * val)
+ int where, u16 *val)
{
u32 data;
int ret;
@@ -221,7 +215,7 @@ static int read_config_word(struct pci_bus *bus, unsigned int devfn,
}
static int read_config_dword(struct pci_bus *bus, unsigned int devfn,
- int where, u32 * val)
+ int where, u32 *val)
{
int ret;
@@ -229,9 +223,8 @@ static int read_config_dword(struct pci_bus *bus, unsigned int devfn,
return ret;
}
-static int
-write_config_byte(struct pci_bus *bus, unsigned int devfn, int where,
- u8 val)
+static int write_config_byte(struct pci_bus *bus, unsigned int devfn,
+ int where, u8 val)
{
u32 data = 0;
@@ -239,7 +232,7 @@ write_config_byte(struct pci_bus *bus, unsigned int devfn, int where,
return -1;
data = (data & ~(0xff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
+ (val << ((where & 3) << 3));
if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
return -1;
@@ -247,9 +240,8 @@ write_config_byte(struct pci_bus *bus, unsigned int devfn, int where,
return PCIBIOS_SUCCESSFUL;
}
-static int
-write_config_word(struct pci_bus *bus, unsigned int devfn, int where,
- u16 val)
+static int write_config_word(struct pci_bus *bus, unsigned int devfn,
+ int where, u16 val)
{
u32 data = 0;
@@ -257,18 +249,16 @@ write_config_word(struct pci_bus *bus, unsigned int devfn, int where,
return -1;
data = (data & ~(0xffff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
+ (val << ((where & 3) << 3));
if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
return -1;
-
return PCIBIOS_SUCCESSFUL;
}
-static int
-write_config_dword(struct pci_bus *bus, unsigned int devfn, int where,
- u32 val)
+static int write_config_dword(struct pci_bus *bus, unsigned int devfn,
+ int where, u32 val)
{
if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &val))
return -1;
@@ -277,18 +267,20 @@ write_config_dword(struct pci_bus *bus, unsigned int devfn, int where,
}
static int config_read(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 * val)
+ int where, int size, u32 *val)
{
switch (size) {
case 1: {
u8 _val;
int rc = read_config_byte(bus, devfn, where, &_val);
+
*val = _val;
return rc;
}
- case 2: {
+ case 2: {
u16 _val;
int rc = read_config_word(bus, devfn, where, &_val);
+
*val = _val;
return rc;
}
@@ -310,7 +302,6 @@ static int config_write(struct pci_bus *bus, unsigned int devfn,
}
}
-
struct pci_ops au1x_pci_ops = {
config_read,
config_write
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_hwbutton.c b/arch/mips/pmc-sierra/msp71xx/msp_hwbutton.c
index ab96a2d7f4c4..11769b55438c 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_hwbutton.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_hwbutton.c
@@ -126,9 +126,6 @@ static irqreturn_t hwbutton_handler(int irq, void *data)
struct hwbutton_interrupt *hirq = data;
unsigned long cic_ext = *CIC_EXT_CFG_REG;
- if (irq != hirq->irq)
- return IRQ_NONE;
-
if (CIC_EXT_IS_ACTIVE_HI(cic_ext, hirq->eirq)) {
/* Interrupt: pin is now HI */
CIC_EXT_SET_ACTIVE_LO(cic_ext, hirq->eirq);
@@ -164,7 +161,7 @@ static int msp_hwbutton_register(struct hwbutton_interrupt *hirq)
*CIC_EXT_CFG_REG = cic_ext;
return request_irq(hirq->irq, hwbutton_handler, IRQF_DISABLED,
- hirq->name, (void *)hirq);
+ hirq->name, hirq);
}
static int __init msp_hwbutton_setup(void)
diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c
index 25d3baf0ebc4..9cebc9e7da63 100644
--- a/arch/mips/sgi-ip27/ip27-timer.c
+++ b/arch/mips/sgi-ip27/ip27-timer.c
@@ -158,7 +158,7 @@ static void rt_set_mode(enum clock_event_mode mode,
}
}
-unsigned int rt_timer_irq;
+int rt_timer_irq;
static irqreturn_t hub_rt_counter_handler(int irq, void *dev_id)
{
@@ -219,7 +219,7 @@ static void __cpuinit hub_rt_clock_event_init(void)
static void __init hub_rt_clock_event_global_init(void)
{
- unsigned int irq;
+ int irq;
do {
smp_wmb();
diff --git a/arch/mn10300/boot/install.sh b/arch/mn10300/boot/install.sh
index 072951c83976..abba30971191 100644
--- a/arch/mn10300/boot/install.sh
+++ b/arch/mn10300/boot/install.sh
@@ -26,42 +26,42 @@ rm -fr $4/../usr/include/linux $4/../usr/include/asm
install -c -m 0755 $2 $4/vmlinuz
install -c -m 0755 $5 $4/boot.rom
install -c -m 0755 -d $4/../usr/include/linux
-cd $TOPDIR/include/linux
+cd ${srctree}/include/linux
for i in `find . -maxdepth 1 -name '*.h' -print`; do
install -c -m 0644 $i $4/../usr/include/linux
done
install -c -m 0755 -d $4/../usr/include/linux/byteorder
-cd $TOPDIR/include/linux/byteorder
+cd ${srctree}/include/linux/byteorder
for i in `find . -name '*.h' -print`; do
install -c -m 0644 $i $4/../usr/include/linux/byteorder
done
install -c -m 0755 -d $4/../usr/include/linux/lockd
-cd $TOPDIR/include/linux/lockd
+cd ${srctree}/include/linux/lockd
for i in `find . -name '*.h' -print`; do
install -c -m 0644 $i $4/../usr/include/linux/lockd
done
install -c -m 0755 -d $4/../usr/include/linux/netfilter_ipv4
-cd $TOPDIR/include/linux/netfilter_ipv4
+cd ${srctree}/include/linux/netfilter_ipv4
for i in `find . -name '*.h' -print`; do
install -c -m 0644 $i $4/../usr/include/linux/netfilter_ipv4
done
install -c -m 0755 -d $4/../usr/include/linux/nfsd
-cd $TOPDIR/include/linux/nfsd
+cd ${srctree}/include/linux/nfsd
for i in `find . -name '*.h' -print`; do
install -c -m 0644 $i $4/../usr/include/linux/nfsd/$i
done
install -c -m 0755 -d $4/../usr/include/linux/raid
-cd $TOPDIR/include/linux/raid
+cd ${srctree}/include/linux/raid
for i in `find . -name '*.h' -print`; do
install -c -m 0644 $i $4/../usr/include/linux/raid
done
install -c -m 0755 -d $4/../usr/include/linux/sunrpc
-cd $TOPDIR/include/linux/sunrpc
+cd ${srctree}/include/linux/sunrpc
for i in `find . -name '*.h' -print`; do
install -c -m 0644 $i $4/../usr/include/linux/sunrpc
done
install -c -m 0755 -d $4/../usr/include/asm
-cd $TOPDIR/include/asm
+cd ${srctree}/include/asm
for i in `find . -name '*.h' -print`; do
install -c -m 0644 $i $4/../usr/include/asm
done
diff --git a/arch/parisc/hpux/gate.S b/arch/parisc/hpux/gate.S
index 38a1c1b8d4e8..f0b18ce89842 100644
--- a/arch/parisc/hpux/gate.S
+++ b/arch/parisc/hpux/gate.S
@@ -13,9 +13,10 @@
#include <asm/unistd.h>
#include <asm/errno.h>
#include <linux/linkage.h>
+#include <linux/init.h>
.level LEVEL
- .text
+ __HEAD
.import hpux_call_table
.import hpux_syscall_exit,code
diff --git a/arch/parisc/hpux/wrappers.S b/arch/parisc/hpux/wrappers.S
index 58c53c879c02..ccd3a50c0995 100644
--- a/arch/parisc/hpux/wrappers.S
+++ b/arch/parisc/hpux/wrappers.S
@@ -28,9 +28,10 @@
#include <asm/assembly.h>
#include <asm/signal.h>
#include <linux/linkage.h>
+#include <linux/init.h>
.level LEVEL
- .text
+ __HEAD
/* These should probably go in a header file somewhere.
* They are duplicated in kernel/wrappers.S
diff --git a/arch/parisc/kernel/Makefile b/arch/parisc/kernel/Makefile
index 1f6585a56f97..016d3fc4111c 100644
--- a/arch/parisc/kernel/Makefile
+++ b/arch/parisc/kernel/Makefile
@@ -4,9 +4,6 @@
extra-y := init_task.o head.o vmlinux.lds
-AFLAGS_entry.o := -traditional
-AFLAGS_pacache.o := -traditional
-
obj-y := cache.o pacache.o setup.o traps.o time.o irq.o \
pa7300lc.o syscall.o entry.o sys_parisc.o firmware.o \
ptrace.o hardware.o inventory.o drivers.o \
diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S
index 111d47284eac..5d0837458c19 100644
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -38,18 +38,11 @@
#include <asm/thread_info.h>
#include <linux/linkage.h>
+#include <linux/init.h>
#ifdef CONFIG_64BIT
-#define CMPIB cmpib,*
-#define CMPB cmpb,*
-#define COND(x) *x
-
.level 2.0w
#else
-#define CMPIB cmpib,
-#define CMPB cmpb,
-#define COND(x) x
-
.level 2.0
#endif
@@ -629,7 +622,7 @@
* the static part of the kernel address space.
*/
- .text
+ __HEAD
.align PAGE_SIZE
@@ -957,9 +950,9 @@ intr_check_sig:
* Only do signals if we are returning to user space
*/
LDREG PT_IASQ0(%r16), %r20
- CMPIB=,n 0,%r20,intr_restore /* backward */
+ cmpib,COND(=),n 0,%r20,intr_restore /* backward */
LDREG PT_IASQ1(%r16), %r20
- CMPIB=,n 0,%r20,intr_restore /* backward */
+ cmpib,COND(=),n 0,%r20,intr_restore /* backward */
copy %r0, %r25 /* long in_syscall = 0 */
#ifdef CONFIG_64BIT
@@ -1013,10 +1006,10 @@ intr_do_resched:
* we jump back to intr_restore.
*/
LDREG PT_IASQ0(%r16), %r20
- CMPIB= 0, %r20, intr_do_preempt
+ cmpib,COND(=) 0, %r20, intr_do_preempt
nop
LDREG PT_IASQ1(%r16), %r20
- CMPIB= 0, %r20, intr_do_preempt
+ cmpib,COND(=) 0, %r20, intr_do_preempt
nop
#ifdef CONFIG_64BIT
@@ -1045,7 +1038,7 @@ intr_do_preempt:
/* current_thread_info()->preempt_count */
mfctl %cr30, %r1
LDREG TI_PRE_COUNT(%r1), %r19
- CMPIB<> 0, %r19, intr_restore /* if preempt_count > 0 */
+ cmpib,COND(<>) 0, %r19, intr_restore /* if preempt_count > 0 */
nop /* prev insn branched backwards */
/* check if we interrupted a critical path */
@@ -1064,7 +1057,7 @@ intr_do_preempt:
*/
intr_extint:
- CMPIB=,n 0,%r16,1f
+ cmpib,COND(=),n 0,%r16,1f
get_stack_use_cr30
b,n 2f
@@ -1099,7 +1092,7 @@ ENDPROC(syscall_exit_rfi)
ENTRY(intr_save) /* for os_hpmc */
mfsp %sr7,%r16
- CMPIB=,n 0,%r16,1f
+ cmpib,COND(=),n 0,%r16,1f
get_stack_use_cr30
b 2f
copy %r8,%r26
@@ -1121,7 +1114,7 @@ ENTRY(intr_save) /* for os_hpmc */
* adjust isr/ior below.
*/
- CMPIB=,n 6,%r26,skip_save_ior
+ cmpib,COND(=),n 6,%r26,skip_save_ior
mfctl %cr20, %r16 /* isr */
@@ -1450,11 +1443,11 @@ nadtlb_emulate:
bb,>=,n %r9,26,nadtlb_nullify /* m bit not set, just nullify */
BL get_register,%r25
extrw,u %r9,15,5,%r8 /* Get index register # */
- CMPIB=,n -1,%r1,nadtlb_fault /* have to use slow path */
+ cmpib,COND(=),n -1,%r1,nadtlb_fault /* have to use slow path */
copy %r1,%r24
BL get_register,%r25
extrw,u %r9,10,5,%r8 /* Get base register # */
- CMPIB=,n -1,%r1,nadtlb_fault /* have to use slow path */
+ cmpib,COND(=),n -1,%r1,nadtlb_fault /* have to use slow path */
BL set_register,%r25
add,l %r1,%r24,%r1 /* doesn't affect c/b bits */
@@ -1486,7 +1479,7 @@ nadtlb_probe_check:
cmpb,<>,n %r16,%r17,nadtlb_fault /* Must be probe,[rw]*/
BL get_register,%r25 /* Find the target register */
extrw,u %r9,31,5,%r8 /* Get target register */
- CMPIB=,n -1,%r1,nadtlb_fault /* have to use slow path */
+ cmpib,COND(=),n -1,%r1,nadtlb_fault /* have to use slow path */
BL set_register,%r25
copy %r0,%r1 /* Write zero to target register */
b nadtlb_nullify /* Nullify return insn */
@@ -1570,12 +1563,12 @@ dbit_trap_20w:
L3_ptep ptp,pte,t0,va,dbit_fault
#ifdef CONFIG_SMP
- CMPIB=,n 0,spc,dbit_nolock_20w
+ cmpib,COND(=),n 0,spc,dbit_nolock_20w
load32 PA(pa_dbit_lock),t0
dbit_spin_20w:
LDCW 0(t0),t1
- cmpib,= 0,t1,dbit_spin_20w
+ cmpib,COND(=) 0,t1,dbit_spin_20w
nop
dbit_nolock_20w:
@@ -1586,7 +1579,7 @@ dbit_nolock_20w:
idtlbt pte,prot
#ifdef CONFIG_SMP
- CMPIB=,n 0,spc,dbit_nounlock_20w
+ cmpib,COND(=),n 0,spc,dbit_nounlock_20w
ldi 1,t1
stw t1,0(t0)
@@ -1606,7 +1599,7 @@ dbit_trap_11:
L2_ptep ptp,pte,t0,va,dbit_fault
#ifdef CONFIG_SMP
- CMPIB=,n 0,spc,dbit_nolock_11
+ cmpib,COND(=),n 0,spc,dbit_nolock_11
load32 PA(pa_dbit_lock),t0
dbit_spin_11:
@@ -1628,7 +1621,7 @@ dbit_nolock_11:
mtsp t1, %sr1 /* Restore sr1 */
#ifdef CONFIG_SMP
- CMPIB=,n 0,spc,dbit_nounlock_11
+ cmpib,COND(=),n 0,spc,dbit_nounlock_11
ldi 1,t1
stw t1,0(t0)
@@ -1646,7 +1639,7 @@ dbit_trap_20:
L2_ptep ptp,pte,t0,va,dbit_fault
#ifdef CONFIG_SMP
- CMPIB=,n 0,spc,dbit_nolock_20
+ cmpib,COND(=),n 0,spc,dbit_nolock_20
load32 PA(pa_dbit_lock),t0
dbit_spin_20:
@@ -1665,7 +1658,7 @@ dbit_nolock_20:
idtlbt pte,prot
#ifdef CONFIG_SMP
- CMPIB=,n 0,spc,dbit_nounlock_20
+ cmpib,COND(=),n 0,spc,dbit_nounlock_20
ldi 1,t1
stw t1,0(t0)
@@ -1994,7 +1987,7 @@ ENTRY(syscall_exit)
/* We can't use "CMPIB<> PER_HPUX" since "im5" field is sign extended */
ldo -PER_HPUX(%r19), %r19
- CMPIB<>,n 0,%r19,1f
+ cmpib,COND(<>),n 0,%r19,1f
/* Save other hpux returns if personality is PER_HPUX */
STREG %r22,TASK_PT_GR22(%r1)
diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S
index ec2482dc1beb..5680a2c3b13d 100644
--- a/arch/parisc/kernel/head.S
+++ b/arch/parisc/kernel/head.S
@@ -32,7 +32,7 @@ ENTRY(boot_args)
.word 0 /* arg3 */
END(boot_args)
- .section .text.head
+ __HEAD
.align 4
.import init_thread_union,data
.import fault_vector_20,code /* IVA parisc 2.0 32 bit */
diff --git a/arch/parisc/kernel/hpmc.S b/arch/parisc/kernel/hpmc.S
index 2cbf13b3ef11..068322eb8c9b 100644
--- a/arch/parisc/kernel/hpmc.S
+++ b/arch/parisc/kernel/hpmc.S
@@ -47,6 +47,7 @@
#include <asm/pdc.h>
#include <linux/linkage.h>
+#include <linux/init.h>
/*
* stack for os_hpmc, the HPMC handler.
@@ -76,7 +77,7 @@ ENTRY(hpmc_pim_data)
.block HPMC_PIM_DATA_SIZE
END(hpmc_pim_data)
- .text
+ __HEAD
.import intr_save, code
ENTRY(os_hpmc)
diff --git a/arch/parisc/kernel/inventory.c b/arch/parisc/kernel/inventory.c
index 4845a6444633..bd1f7f1ff74e 100644
--- a/arch/parisc/kernel/inventory.c
+++ b/arch/parisc/kernel/inventory.c
@@ -499,7 +499,7 @@ add_system_map_addresses(struct parisc_device *dev, int num_addrs,
dev->addr = kmalloc(num_addrs * sizeof(unsigned long), GFP_KERNEL);
if(!dev->addr) {
printk(KERN_ERR "%s %s(): memory allocation failure\n",
- __FILE__, __FUNCTION__);
+ __FILE__, __func__);
return;
}
diff --git a/arch/parisc/kernel/pacache.S b/arch/parisc/kernel/pacache.S
index 5901092e0196..e3246a5ca74f 100644
--- a/arch/parisc/kernel/pacache.S
+++ b/arch/parisc/kernel/pacache.S
@@ -37,8 +37,9 @@
#include <asm/pgtable.h>
#include <asm/cache.h>
#include <linux/linkage.h>
+#include <linux/init.h>
- .text
+ __HEAD
.align 128
ENTRY(flush_tlb_all_local)
@@ -85,7 +86,7 @@ ENTRY(flush_tlb_all_local)
LDREG ITLB_OFF_COUNT(%r1), %arg2
LDREG ITLB_LOOP(%r1), %arg3
- ADDIB= -1, %arg3, fitoneloop /* Preadjust and test */
+ addib,COND(=) -1, %arg3, fitoneloop /* Preadjust and test */
movb,<,n %arg3, %r31, fitdone /* If loop < 0, skip */
copy %arg0, %r28 /* Init base addr */
@@ -95,14 +96,14 @@ fitmanyloop: /* Loop if LOOP >= 2 */
copy %arg2, %r29 /* Init middle loop count */
fitmanymiddle: /* Loop if LOOP >= 2 */
- ADDIB> -1, %r31, fitmanymiddle /* Adjusted inner loop decr */
+ addib,COND(>) -1, %r31, fitmanymiddle /* Adjusted inner loop decr */
pitlbe 0(%sr1, %r28)
pitlbe,m %arg1(%sr1, %r28) /* Last pitlbe and addr adjust */
- ADDIB> -1, %r29, fitmanymiddle /* Middle loop decr */
+ addib,COND(>) -1, %r29, fitmanymiddle /* Middle loop decr */
copy %arg3, %r31 /* Re-init inner loop count */
movb,tr %arg0, %r28, fitmanyloop /* Re-init base addr */
- ADDIB<=,n -1, %r22, fitdone /* Outer loop count decr */
+ addib,COND(<=),n -1, %r22, fitdone /* Outer loop count decr */
fitoneloop: /* Loop if LOOP = 1 */
mtsp %r20, %sr1
@@ -110,10 +111,10 @@ fitoneloop: /* Loop if LOOP = 1 */
copy %arg2, %r29 /* init middle loop count */
fitonemiddle: /* Loop if LOOP = 1 */
- ADDIB> -1, %r29, fitonemiddle /* Middle loop count decr */
+ addib,COND(>) -1, %r29, fitonemiddle /* Middle loop count decr */
pitlbe,m %arg1(%sr1, %r28) /* pitlbe for one loop */
- ADDIB> -1, %r22, fitoneloop /* Outer loop count decr */
+ addib,COND(>) -1, %r22, fitoneloop /* Outer loop count decr */
add %r21, %r20, %r20 /* increment space */
fitdone:
@@ -128,7 +129,7 @@ fitdone:
LDREG DTLB_OFF_COUNT(%r1), %arg2
LDREG DTLB_LOOP(%r1), %arg3
- ADDIB= -1, %arg3, fdtoneloop /* Preadjust and test */
+ addib,COND(=) -1, %arg3, fdtoneloop /* Preadjust and test */
movb,<,n %arg3, %r31, fdtdone /* If loop < 0, skip */
copy %arg0, %r28 /* Init base addr */
@@ -138,14 +139,14 @@ fdtmanyloop: /* Loop if LOOP >= 2 */
copy %arg2, %r29 /* Init middle loop count */
fdtmanymiddle: /* Loop if LOOP >= 2 */
- ADDIB> -1, %r31, fdtmanymiddle /* Adjusted inner loop decr */
+ addib,COND(>) -1, %r31, fdtmanymiddle /* Adjusted inner loop decr */
pdtlbe 0(%sr1, %r28)
pdtlbe,m %arg1(%sr1, %r28) /* Last pdtlbe and addr adjust */
- ADDIB> -1, %r29, fdtmanymiddle /* Middle loop decr */
+ addib,COND(>) -1, %r29, fdtmanymiddle /* Middle loop decr */
copy %arg3, %r31 /* Re-init inner loop count */
movb,tr %arg0, %r28, fdtmanyloop /* Re-init base addr */
- ADDIB<=,n -1, %r22,fdtdone /* Outer loop count decr */
+ addib,COND(<=),n -1, %r22,fdtdone /* Outer loop count decr */
fdtoneloop: /* Loop if LOOP = 1 */
mtsp %r20, %sr1
@@ -153,10 +154,10 @@ fdtoneloop: /* Loop if LOOP = 1 */
copy %arg2, %r29 /* init middle loop count */
fdtonemiddle: /* Loop if LOOP = 1 */
- ADDIB> -1, %r29, fdtonemiddle /* Middle loop count decr */
+ addib,COND(>) -1, %r29, fdtonemiddle /* Middle loop count decr */
pdtlbe,m %arg1(%sr1, %r28) /* pdtlbe for one loop */
- ADDIB> -1, %r22, fdtoneloop /* Outer loop count decr */
+ addib,COND(>) -1, %r22, fdtoneloop /* Outer loop count decr */
add %r21, %r20, %r20 /* increment space */
@@ -209,18 +210,18 @@ ENTRY(flush_instruction_cache_local)
LDREG ICACHE_COUNT(%r1), %arg2
LDREG ICACHE_LOOP(%r1), %arg3
rsm PSW_SM_I, %r22 /* No mmgt ops during loop*/
- ADDIB= -1, %arg3, fioneloop /* Preadjust and test */
+ addib,COND(=) -1, %arg3, fioneloop /* Preadjust and test */
movb,<,n %arg3, %r31, fisync /* If loop < 0, do sync */
fimanyloop: /* Loop if LOOP >= 2 */
- ADDIB> -1, %r31, fimanyloop /* Adjusted inner loop decr */
+ addib,COND(>) -1, %r31, fimanyloop /* Adjusted inner loop decr */
fice %r0(%sr1, %arg0)
fice,m %arg1(%sr1, %arg0) /* Last fice and addr adjust */
movb,tr %arg3, %r31, fimanyloop /* Re-init inner loop count */
- ADDIB<=,n -1, %arg2, fisync /* Outer loop decr */
+ addib,COND(<=),n -1, %arg2, fisync /* Outer loop decr */
fioneloop: /* Loop if LOOP = 1 */
- ADDIB> -1, %arg2, fioneloop /* Outer loop count decr */
+ addib,COND(>) -1, %arg2, fioneloop /* Outer loop count decr */
fice,m %arg1(%sr1, %arg0) /* Fice for one loop */
fisync:
@@ -250,18 +251,18 @@ ENTRY(flush_data_cache_local)
LDREG DCACHE_COUNT(%r1), %arg2
LDREG DCACHE_LOOP(%r1), %arg3
rsm PSW_SM_I, %r22
- ADDIB= -1, %arg3, fdoneloop /* Preadjust and test */
+ addib,COND(=) -1, %arg3, fdoneloop /* Preadjust and test */
movb,<,n %arg3, %r31, fdsync /* If loop < 0, do sync */
fdmanyloop: /* Loop if LOOP >= 2 */
- ADDIB> -1, %r31, fdmanyloop /* Adjusted inner loop decr */
+ addib,COND(>) -1, %r31, fdmanyloop /* Adjusted inner loop decr */
fdce %r0(%sr1, %arg0)
fdce,m %arg1(%sr1, %arg0) /* Last fdce and addr adjust */
movb,tr %arg3, %r31, fdmanyloop /* Re-init inner loop count */
- ADDIB<=,n -1, %arg2, fdsync /* Outer loop decr */
+ addib,COND(<=),n -1, %arg2, fdsync /* Outer loop decr */
fdoneloop: /* Loop if LOOP = 1 */
- ADDIB> -1, %arg2, fdoneloop /* Outer loop count decr */
+ addib,COND(>) -1, %arg2, fdoneloop /* Outer loop count decr */
fdce,m %arg1(%sr1, %arg0) /* Fdce for one loop */
fdsync:
@@ -342,7 +343,7 @@ ENTRY(copy_user_page_asm)
* non-taken backward branch. Note that .+4 is a backwards branch.
* The ldd should only get executed if the branch is taken.
*/
- ADDIB>,n -1, %r1, 1b /* bundle 10 */
+ addib,COND(>),n -1, %r1, 1b /* bundle 10 */
ldd 0(%r25), %r19 /* start next loads */
#else
@@ -391,7 +392,7 @@ ENTRY(copy_user_page_asm)
stw %r21, 56(%r26)
stw %r22, 60(%r26)
ldo 64(%r26), %r26
- ADDIB>,n -1, %r1, 1b
+ addib,COND(>),n -1, %r1, 1b
ldw 0(%r25), %r19
#endif
bv %r0(%r2)
@@ -515,7 +516,7 @@ ENTRY(copy_user_page_asm)
stw %r21, 56(%r28)
stw %r22, 60(%r28)
ldo 64(%r28), %r28
- ADDIB> -1, %r1,1b
+ addib,COND(>) -1, %r1,1b
ldo 64(%r29), %r29
bv %r0(%r2)
@@ -574,7 +575,7 @@ ENTRY(__clear_user_page_asm)
std %r0, 104(%r28)
std %r0, 112(%r28)
std %r0, 120(%r28)
- ADDIB> -1, %r1, 1b
+ addib,COND(>) -1, %r1, 1b
ldo 128(%r28), %r28
#else /* ! CONFIG_64BIT */
@@ -597,7 +598,7 @@ ENTRY(__clear_user_page_asm)
stw %r0, 52(%r28)
stw %r0, 56(%r28)
stw %r0, 60(%r28)
- ADDIB> -1, %r1, 1b
+ addib,COND(>) -1, %r1, 1b
ldo 64(%r28), %r28
#endif /* CONFIG_64BIT */
@@ -640,7 +641,7 @@ ENTRY(flush_kernel_dcache_page_asm)
fdc,m %r23(%r26)
fdc,m %r23(%r26)
fdc,m %r23(%r26)
- CMPB<< %r26, %r25,1b
+ cmpb,COND(<<) %r26, %r25,1b
fdc,m %r23(%r26)
sync
@@ -683,7 +684,7 @@ ENTRY(flush_user_dcache_page)
fdc,m %r23(%sr3, %r26)
fdc,m %r23(%sr3, %r26)
fdc,m %r23(%sr3, %r26)
- CMPB<< %r26, %r25,1b
+ cmpb,COND(<<) %r26, %r25,1b
fdc,m %r23(%sr3, %r26)
sync
@@ -726,7 +727,7 @@ ENTRY(flush_user_icache_page)
fic,m %r23(%sr3, %r26)
fic,m %r23(%sr3, %r26)
fic,m %r23(%sr3, %r26)
- CMPB<< %r26, %r25,1b
+ cmpb,COND(<<) %r26, %r25,1b
fic,m %r23(%sr3, %r26)
sync
@@ -769,7 +770,7 @@ ENTRY(purge_kernel_dcache_page)
pdc,m %r23(%r26)
pdc,m %r23(%r26)
pdc,m %r23(%r26)
- CMPB<< %r26, %r25, 1b
+ cmpb,COND(<<) %r26, %r25, 1b
pdc,m %r23(%r26)
sync
@@ -833,7 +834,7 @@ ENTRY(flush_alias_page)
fdc,m %r23(%r28)
fdc,m %r23(%r28)
fdc,m %r23(%r28)
- CMPB<< %r28, %r29, 1b
+ cmpb,COND(<<) %r28, %r29, 1b
fdc,m %r23(%r28)
sync
@@ -856,7 +857,7 @@ flush_user_dcache_range_asm:
ldo -1(%r23), %r21
ANDCM %r26, %r21, %r26
-1: CMPB<<,n %r26, %r25, 1b
+1: cmpb,COND(<<),n %r26, %r25, 1b
fdc,m %r23(%sr3, %r26)
sync
@@ -877,7 +878,7 @@ ENTRY(flush_kernel_dcache_range_asm)
ldo -1(%r23), %r21
ANDCM %r26, %r21, %r26
-1: CMPB<<,n %r26, %r25,1b
+1: cmpb,COND(<<),n %r26, %r25,1b
fdc,m %r23(%r26)
sync
@@ -899,7 +900,7 @@ ENTRY(flush_user_icache_range_asm)
ldo -1(%r23), %r21
ANDCM %r26, %r21, %r26
-1: CMPB<<,n %r26, %r25,1b
+1: cmpb,COND(<<),n %r26, %r25,1b
fic,m %r23(%sr3, %r26)
sync
@@ -942,7 +943,7 @@ ENTRY(flush_kernel_icache_page)
fic,m %r23(%sr4, %r26)
fic,m %r23(%sr4, %r26)
fic,m %r23(%sr4, %r26)
- CMPB<< %r26, %r25, 1b
+ cmpb,COND(<<) %r26, %r25, 1b
fic,m %r23(%sr4, %r26)
sync
@@ -963,7 +964,7 @@ ENTRY(flush_kernel_icache_range_asm)
ldo -1(%r23), %r21
ANDCM %r26, %r21, %r26
-1: CMPB<<,n %r26, %r25, 1b
+1: cmpb,COND(<<),n %r26, %r25, 1b
fic,m %r23(%sr4, %r26)
sync
diff --git a/arch/parisc/kernel/perf_asm.S b/arch/parisc/kernel/perf_asm.S
index 43874ca3ed67..d411dfb5b6d1 100644
--- a/arch/parisc/kernel/perf_asm.S
+++ b/arch/parisc/kernel/perf_asm.S
@@ -20,6 +20,8 @@
*/
#include <asm/assembly.h>
+
+#include <linux/init.h>
#include <linux/linkage.h>
#ifdef CONFIG_64BIT
@@ -41,7 +43,7 @@
; The coprocessor only needs to be enabled when
; starting/stopping the coprocessor with the pmenb/pmdis.
;
- .text
+ __HEAD
ENTRY(perf_intrigue_enable_perf_counters)
.proc
diff --git a/arch/parisc/kernel/real2.S b/arch/parisc/kernel/real2.S
index 7a92695d95a6..47fbdae6efd5 100644
--- a/arch/parisc/kernel/real2.S
+++ b/arch/parisc/kernel/real2.S
@@ -12,6 +12,7 @@
#include <asm/assembly.h>
#include <linux/linkage.h>
+#include <linux/init.h>
.section .bss
.export real_stack
@@ -39,7 +40,7 @@ save_cr_end:
/************************ 32-bit real-mode calls ***********************/
/* This can be called in both narrow and wide kernels */
- .text
+ __HEAD
/* unsigned long real32_call_asm(unsigned int *sp,
* unsigned int *arg0p,
@@ -113,7 +114,7 @@ ENDPROC(real32_call_asm)
# define PUSH_CR(r, where) mfctl r, %r1 ! STREG,ma %r1, REG_SZ(where)
# define POP_CR(r, where) LDREG,mb -REG_SZ(where), %r1 ! mtctl %r1, r
- .text
+ __HEAD
save_control_regs:
load32 PA(save_cr_space), %r28
PUSH_CR(%cr24, %r28)
@@ -145,7 +146,7 @@ restore_control_regs:
/* rfi_virt2real() and rfi_real2virt() could perhaps be adapted for
* more general-purpose use by the several places which need RFIs
*/
- .text
+ __HEAD
.align 128
rfi_virt2real:
/* switch to real mode... */
@@ -180,7 +181,7 @@ rfi_v2r_1:
bv 0(%r2)
nop
- .text
+ __HEAD
.align 128
rfi_real2virt:
rsm PSW_SM_I,%r0
@@ -218,7 +219,7 @@ rfi_r2v_1:
/************************ 64-bit real-mode calls ***********************/
/* This is only usable in wide kernels right now and will probably stay so */
- .text
+ __HEAD
/* unsigned long real64_call_asm(unsigned long *sp,
* unsigned long *arg0p,
* unsigned long fn)
@@ -276,7 +277,7 @@ ENDPROC(real64_call_asm)
#endif
- .text
+ __HEAD
/* http://lists.parisc-linux.org/hypermail/parisc-linux/10916.html
** GCC 3.3 and later has a new function in libgcc.a for
** comparing function pointers.
diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S
index 69b6eebc466e..ae509d8cd03f 100644
--- a/arch/parisc/kernel/syscall.S
+++ b/arch/parisc/kernel/syscall.S
@@ -17,6 +17,7 @@
#include <asm/processor.h>
#include <linux/linkage.h>
+#include <linux/init.h>
/* We fill the empty parts of the gateway page with
* something that will kill the kernel or a
@@ -26,7 +27,7 @@
.level LEVEL
- .text
+ __HEAD
.import syscall_exit,code
.import syscall_exit_rfi,code
@@ -636,7 +637,7 @@ END(sys_call_table64)
All light-weight-syscall atomic operations
will use this set of locks
*/
- .section .data
+ .section .data, "aw"
.align PAGE_SIZE
ENTRY(lws_lock_start)
/* lws locks */
diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c
index 9dc6dc42f9cf..675f1d098f05 100644
--- a/arch/parisc/kernel/traps.c
+++ b/arch/parisc/kernel/traps.c
@@ -275,7 +275,7 @@ KERN_CRIT " || ||\n");
/* Wot's wrong wif bein' racy? */
if (current->thread.flags & PARISC_KERNEL_DEATH) {
- printk(KERN_CRIT "%s() recursion detected.\n", __FUNCTION__);
+ printk(KERN_CRIT "%s() recursion detected.\n", __func__);
local_irq_enable();
while (1);
}
diff --git a/arch/parisc/kernel/unaligned.c b/arch/parisc/kernel/unaligned.c
index aebf3c168871..e6f4b7a4b7e3 100644
--- a/arch/parisc/kernel/unaligned.c
+++ b/arch/parisc/kernel/unaligned.c
@@ -30,7 +30,7 @@
/* #define DEBUG_UNALIGNED 1 */
#ifdef DEBUG_UNALIGNED
-#define DPRINTF(fmt, args...) do { printk(KERN_DEBUG "%s:%d:%s ", __FILE__, __LINE__, __FUNCTION__ ); printk(KERN_DEBUG fmt, ##args ); } while (0)
+#define DPRINTF(fmt, args...) do { printk(KERN_DEBUG "%s:%d:%s ", __FILE__, __LINE__, __func__ ); printk(KERN_DEBUG fmt, ##args ); } while (0)
#else
#define DPRINTF(fmt, args...)
#endif
@@ -460,7 +460,8 @@ void handle_unaligned(struct pt_regs *regs)
goto force_sigbus;
}
- if (unaligned_count > 5 && jiffies - last_time > 5*HZ) {
+ if (unaligned_count > 5 &&
+ time_after(jiffies, last_time + 5 * HZ)) {
unaligned_count = 0;
last_time = jiffies;
}
diff --git a/arch/parisc/lib/fixup.S b/arch/parisc/lib/fixup.S
index d172d4245cdc..4821ad6d5269 100644
--- a/arch/parisc/lib/fixup.S
+++ b/arch/parisc/lib/fixup.S
@@ -23,6 +23,7 @@
#include <asm/assembly.h>
#include <asm/errno.h>
#include <linux/linkage.h>
+#include <linux/init.h>
#ifdef CONFIG_SMP
.macro get_fault_ip t1 t2
@@ -55,7 +56,7 @@
.level LEVEL
- .text
+ __HEAD
.section .fixup, "ax"
/* get_user() fixups, store -EFAULT in r8, and 0 in r9 */
diff --git a/arch/parisc/lib/lusercopy.S b/arch/parisc/lib/lusercopy.S
index 1bd23ccec17b..b0d885350846 100644
--- a/arch/parisc/lib/lusercopy.S
+++ b/arch/parisc/lib/lusercopy.S
@@ -33,11 +33,12 @@
*/
- .text
-
#include <asm/assembly.h>
#include <asm/errno.h>
#include <linux/linkage.h>
+#include <linux/init.h>
+
+ __HEAD
/*
* get_sr gets the appropriate space value into
diff --git a/arch/parisc/lib/memcpy.c b/arch/parisc/lib/memcpy.c
index d22042d33100..2d68431fc22e 100644
--- a/arch/parisc/lib/memcpy.c
+++ b/arch/parisc/lib/memcpy.c
@@ -91,7 +91,7 @@ DECLARE_PER_CPU(struct exception_data, exception_data);
#define THRESHOLD 16
#ifdef DEBUG_MEMCPY
-#define DPRINTF(fmt, args...) do { printk(KERN_DEBUG "%s:%d:%s ", __FILE__, __LINE__, __FUNCTION__ ); printk(KERN_DEBUG fmt, ##args ); } while (0)
+#define DPRINTF(fmt, args...) do { printk(KERN_DEBUG "%s:%d:%s ", __FILE__, __LINE__, __func__ ); printk(KERN_DEBUG fmt, ##args ); } while (0)
#else
#define DPRINTF(fmt, args...)
#endif
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index 1f012843150f..78fe252b92c3 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -555,8 +555,6 @@ void show_mem(void)
printk(KERN_INFO "Mem-info:\n");
show_free_areas();
- printk(KERN_INFO "Free swap: %6ldkB\n",
- nr_swap_pages<<(PAGE_SHIFT-10));
#ifndef CONFIG_DISCONTIGMEM
i = max_mapnr;
while (i-- > 0) {
@@ -606,7 +604,7 @@ void show_mem(void)
int i, j;
for (i = 0; i < npmem_ranges; i++) {
- zl = node_zonelist(i);
+ zl = node_zonelist(i, 0);
for (j = 0; j < MAX_NR_ZONES; j++) {
struct zoneref *z;
struct zone *zone;
diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts
index eac8e1b59496..1e7802cc31ae 100644
--- a/arch/powerpc/boot/dts/mpc8377_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8377_mds.dts
@@ -268,6 +268,33 @@
interrupt-parent = <&ipic>;
};
+ dma@82a8 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8349-dma";
+ reg = <0x82a8 4>;
+ ranges = <0 0x8100 0x1a8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <0x47 8>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8349-dma-channel";
+ reg = <0 0x80>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8349-dma-channel";
+ reg = <0x80 0x80>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8349-dma-channel";
+ reg = <0x100 0x80>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8349-dma-channel";
+ reg = <0x180 0x28>;
+ };
+ };
+
/* IPIC
* interrupts cell = <intr #, sense>
* sense values match linux IORESOURCE_IRQ_* defines:
diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
index bba234eb14a9..08a780d89807 100644
--- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts
+++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
@@ -46,9 +46,63 @@
reg = <0x00000000 0x20000000>; // 512M at 0x0
};
- board-control@e8000000 {
- compatible = "fsl,fpga-pixis";
- reg = <0xe8000000 32>; // pixis at 0xe8000000
+ localbus@e0005000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8610-elbc", "fsl,elbc", "simple-bus";
+ reg = <0xe0005000 0x1000>;
+ interrupts = <19 2>;
+ interrupt-parent = <&mpic>;
+ ranges = <0 0 0xf8000000 0x08000000
+ 1 0 0xf0000000 0x08000000
+ 2 0 0xe8400000 0x00008000
+ 4 0 0xe8440000 0x00008000
+ 5 0 0xe8480000 0x00008000
+ 6 0 0xe84c0000 0x00008000
+ 3 0 0xe8000000 0x00000020>;
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+ };
+
+ flash@1,0 {
+ compatible = "cfi-flash";
+ reg = <1 0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+ };
+
+ flash@2,0 {
+ compatible = "fsl,mpc8610-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <2 0 0x8000>;
+ };
+
+ flash@4,0 {
+ compatible = "fsl,mpc8610-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <4 0 0x8000>;
+ };
+
+ flash@5,0 {
+ compatible = "fsl,mpc8610-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <5 0 0x8000>;
+ };
+
+ flash@6,0 {
+ compatible = "fsl,mpc8610-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <6 0 0x8000>;
+ };
+
+ board-control@3,0 {
+ compatible = "fsl,fpga-pixis";
+ reg = <3 0 0x20>;
+ };
};
soc@e0000000 {
diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts
index b86e65d926c1..22d967178fe9 100644
--- a/arch/powerpc/boot/dts/sbc8548.dts
+++ b/arch/powerpc/boot/dts/sbc8548.dts
@@ -52,6 +52,99 @@
reg = <0x00000000 0x10000000>;
};
+ localbus@e0000000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ reg = <0xe0000000 0x5000>;
+ interrupt-parent = <&mpic>;
+
+ ranges = <0x0 0x0 0xff800000 0x00800000 /*8MB Flash*/
+ 0x3 0x0 0xf0000000 0x04000000 /*64MB SDRAM*/
+ 0x4 0x0 0xf4000000 0x04000000 /*64MB SDRAM*/
+ 0x5 0x0 0xf8000000 0x00b10000 /* EPLD */
+ 0x6 0x0 0xfb800000 0x04000000>; /*64MB Flash*/
+
+
+ flash@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x800000>;
+ bank-width = <1>;
+ device-width = <1>;
+ partition@0x0 {
+ label = "space";
+ reg = <0x00000000 0x00100000>;
+ };
+ partition@0x100000 {
+ label = "bootloader";
+ reg = <0x00100000 0x00700000>;
+ read-only;
+ };
+ };
+
+ epld@5,0 {
+ compatible = "wrs,epld-localbus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ reg = <0x5 0x0 0x00b10000>;
+ ranges = <
+ 0x0 0x0 0x5 0x000000 0x1fff /* LED */
+ 0x1 0x0 0x5 0x100000 0x1fff /* Switches */
+ 0x3 0x0 0x5 0x300000 0x1fff /* HW Rev. */
+ 0xb 0x0 0x5 0xb00000 0x1fff /* EEPROM */
+ >;
+
+ led@0,0 {
+ compatible = "led";
+ reg = <0x0 0x0 0x1fff>;
+ };
+
+ switches@1,0 {
+ compatible = "switches";
+ reg = <0x1 0x0 0x1fff>;
+ };
+
+ hw-rev@3,0 {
+ compatible = "hw-rev";
+ reg = <0x3 0x0 0x1fff>;
+ };
+
+ eeprom@b,0 {
+ compatible = "eeprom";
+ reg = <0xb 0 0x1fff>;
+ };
+
+ };
+
+ alt-flash@6,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x6 0x0 0x04000000>;
+ compatible = "cfi-flash";
+ bank-width = <4>;
+ device-width = <1>;
+ partition@0x0 {
+ label = "bootloader";
+ reg = <0x00000000 0x00100000>;
+ read-only;
+ };
+ partition@0x00100000 {
+ label = "file-system";
+ reg = <0x00100000 0x01f00000>;
+ };
+ partition@0x02000000 {
+ label = "boot-config";
+ reg = <0x02000000 0x00100000>;
+ };
+ partition@0x02100000 {
+ label = "space";
+ reg = <0x02100000 0x01f00000>;
+ };
+ };
+ };
+
soc8548@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
@@ -59,6 +152,7 @@
ranges = <0x00000000 0xe0000000 0x00100000>;
reg = <0xe0000000 0x00001000>; // CCSRBAR
bus-frequency = <0>;
+ compatible = "simple-bus";
memory-controller@2000 {
compatible = "fsl,8548-memory-controller";
diff --git a/arch/powerpc/configs/mpc8610_hpcd_defconfig b/arch/powerpc/configs/mpc8610_hpcd_defconfig
index 9270afe7594d..7e5b9ce58d89 100644
--- a/arch/powerpc/configs/mpc8610_hpcd_defconfig
+++ b/arch/powerpc/configs/mpc8610_hpcd_defconfig
@@ -358,7 +358,93 @@ CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_FSL_ELBC=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
@@ -567,14 +653,11 @@ CONFIG_MII=y
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
-CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
-CONFIG_TULIP_MMIO=y
-# CONFIG_TULIP_NAPI is not set
+# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
-# CONFIG_ULI526X is not set
+CONFIG_ULI526X=y
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index d14cebf62bb0..2346d271fbfd 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -105,6 +105,9 @@ PHONY += systbl_chk
systbl_chk: $(src)/systbl_chk.sh $(obj)/systbl_chk.i
$(call cmd,systbl_chk)
+
+ifeq ($(CONFIG_PPC_MERGE),y)
+
$(obj)/built-in.o: prom_init_check
quiet_cmd_prom_init_check = CALL $<
@@ -114,4 +117,7 @@ PHONY += prom_init_check
prom_init_check: $(src)/prom_init_check.sh $(obj)/prom_init.o
$(call cmd,prom_init_check)
+endif
+
+
clean-files := vmlinux.lds
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 81738a4b3c3a..e44d5530f0a6 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -1484,6 +1484,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.dcache_bsize = 32,
.machine_check = machine_check_e200,
.platform = "ppc5554",
+ }
#endif /* CONFIG_E200 */
#ifdef CONFIG_E500
{ /* e500 */
@@ -1533,6 +1534,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.dcache_bsize = 32,
.machine_check = machine_check_e500,
.platform = "powerpc",
+ }
#endif /* CONFIG_E500 */
#endif /* CONFIG_PPC32 */
};
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index f1d2cdc5331b..c71d37dc6a88 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -10,6 +10,7 @@ ifeq ($(CONFIG_PPC_MERGE),y)
obj-y := string.o alloc.o \
checksum_$(CONFIG_WORD_SIZE).o
obj-$(CONFIG_PPC32) += div64.o copy_32.o
+obj-$(CONFIG_HAS_IOMEM) += devres.o
endif
obj-$(CONFIG_PPC64) += copypage_64.o copyuser_64.o \
@@ -23,4 +24,3 @@ obj-$(CONFIG_SMP) += locks.o
endif
obj-$(CONFIG_PPC_LIB_RHEAP) += rheap.o
-obj-$(CONFIG_HAS_IOMEM) += devres.o
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 2b5a399f6fa6..0f2d239d94c4 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -94,6 +94,9 @@ unsigned long htab_hash_mask;
int mmu_linear_psize = MMU_PAGE_4K;
int mmu_virtual_psize = MMU_PAGE_4K;
int mmu_vmalloc_psize = MMU_PAGE_4K;
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+int mmu_vmemmap_psize = MMU_PAGE_4K;
+#endif
int mmu_io_psize = MMU_PAGE_4K;
int mmu_kernel_ssize = MMU_SEGSIZE_256M;
int mmu_highuser_ssize = MMU_SEGSIZE_256M;
@@ -387,11 +390,32 @@ static void __init htab_init_page_sizes(void)
}
#endif /* CONFIG_PPC_64K_PAGES */
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+ /* We try to use 16M pages for vmemmap if that is supported
+ * and we have at least 1G of RAM at boot
+ */
+ if (mmu_psize_defs[MMU_PAGE_16M].shift &&
+ lmb_phys_mem_size() >= 0x40000000)
+ mmu_vmemmap_psize = MMU_PAGE_16M;
+ else if (mmu_psize_defs[MMU_PAGE_64K].shift)
+ mmu_vmemmap_psize = MMU_PAGE_64K;
+ else
+ mmu_vmemmap_psize = MMU_PAGE_4K;
+#endif /* CONFIG_SPARSEMEM_VMEMMAP */
+
printk(KERN_DEBUG "Page orders: linear mapping = %d, "
- "virtual = %d, io = %d\n",
+ "virtual = %d, io = %d"
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+ ", vmemmap = %d"
+#endif
+ "\n",
mmu_psize_defs[mmu_linear_psize].shift,
mmu_psize_defs[mmu_virtual_psize].shift,
- mmu_psize_defs[mmu_io_psize].shift);
+ mmu_psize_defs[mmu_io_psize].shift
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+ ,mmu_psize_defs[mmu_vmemmap_psize].shift
+#endif
+ );
#ifdef CONFIG_HUGETLB_PAGE
/* Init large page size. Currently, we pick 16M or 1M depending
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index c5ac532a0161..6aa65375abf5 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -19,6 +19,8 @@
*
*/
+#undef DEBUG
+
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/kernel.h>
@@ -208,12 +210,12 @@ int __meminit vmemmap_populated(unsigned long start, int page_size)
}
int __meminit vmemmap_populate(struct page *start_page,
- unsigned long nr_pages, int node)
+ unsigned long nr_pages, int node)
{
unsigned long mode_rw;
unsigned long start = (unsigned long)start_page;
unsigned long end = (unsigned long)(start_page + nr_pages);
- unsigned long page_size = 1 << mmu_psize_defs[mmu_linear_psize].shift;
+ unsigned long page_size = 1 << mmu_psize_defs[mmu_vmemmap_psize].shift;
mode_rw = _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX;
@@ -235,11 +237,11 @@ int __meminit vmemmap_populate(struct page *start_page,
start, p, __pa(p));
mapped = htab_bolt_mapping(start, start + page_size,
- __pa(p), mode_rw, mmu_linear_psize,
+ __pa(p), mode_rw, mmu_vmemmap_psize,
mmu_kernel_ssize);
BUG_ON(mapped < 0);
}
return 0;
}
-#endif
+#endif /* CONFIG_SPARSEMEM_VMEMMAP */
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index cf8705e32d60..89497fb04280 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -28,7 +28,7 @@
#include <asm/udbg.h>
#ifdef DEBUG
-#define DBG(fmt...) udbg_printf(fmt)
+#define DBG(fmt...) printk(fmt)
#else
#define DBG pr_debug
#endif
@@ -263,13 +263,19 @@ void slb_initialize(void)
extern unsigned int *slb_miss_kernel_load_linear;
extern unsigned int *slb_miss_kernel_load_io;
extern unsigned int *slb_compare_rr_to_size;
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+ extern unsigned int *slb_miss_kernel_load_vmemmap;
+ unsigned long vmemmap_llp;
+#endif
/* Prepare our SLB miss handler based on our page size */
linear_llp = mmu_psize_defs[mmu_linear_psize].sllp;
io_llp = mmu_psize_defs[mmu_io_psize].sllp;
vmalloc_llp = mmu_psize_defs[mmu_vmalloc_psize].sllp;
get_paca()->vmalloc_sllp = SLB_VSID_KERNEL | vmalloc_llp;
-
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+ vmemmap_llp = mmu_psize_defs[mmu_vmemmap_psize].sllp;
+#endif
if (!slb_encoding_inited) {
slb_encoding_inited = 1;
patch_slb_encoding(slb_miss_kernel_load_linear,
@@ -281,6 +287,12 @@ void slb_initialize(void)
DBG("SLB: linear LLP = %04lx\n", linear_llp);
DBG("SLB: io LLP = %04lx\n", io_llp);
+
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+ patch_slb_encoding(slb_miss_kernel_load_vmemmap,
+ SLB_VSID_KERNEL | vmemmap_llp);
+ DBG("SLB: vmemmap LLP = %04lx\n", vmemmap_llp);
+#endif
}
get_paca()->stab_rr = SLB_NUM_BOLTED;
diff --git a/arch/powerpc/mm/slb_low.S b/arch/powerpc/mm/slb_low.S
index 657f6b37e9df..bc44dc4b5c67 100644
--- a/arch/powerpc/mm/slb_low.S
+++ b/arch/powerpc/mm/slb_low.S
@@ -47,8 +47,7 @@ _GLOBAL(slb_allocate_realmode)
* it to VSID 0, which is reserved as a bad VSID - one which
* will never have any pages in it. */
- /* Check if hitting the linear mapping of the vmalloc/ioremap
- * kernel space
+ /* Check if hitting the linear mapping or some other kernel space
*/
bne cr7,1f
@@ -62,7 +61,18 @@ BEGIN_FTR_SECTION
END_FTR_SECTION_IFCLR(CPU_FTR_1T_SEGMENT)
b slb_finish_load_1T
-1: /* vmalloc/ioremap mapping encoding bits, the "li" instructions below
+1:
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+ /* Check virtual memmap region. To be patches at kernel boot */
+ cmpldi cr0,r9,0xf
+ bne 1f
+_GLOBAL(slb_miss_kernel_load_vmemmap)
+ li r11,0
+ b 6f
+1:
+#endif /* CONFIG_SPARSEMEM_VMEMMAP */
+
+ /* vmalloc/ioremap mapping encoding bits, the "li" instructions below
* will be patched by the kernel at boot
*/
BEGIN_FTR_SECTION
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 25f8bc75e838..43a459f63e31 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -32,6 +32,7 @@
#include <linux/fsl_devices.h>
#include <linux/of_platform.h>
#include <linux/of_device.h>
+#include <linux/phy.h>
#include <asm/system.h>
#include <asm/atomic.h>
@@ -56,6 +57,95 @@
#define DBG(fmt...)
#endif
+#define MV88E1111_SCR 0x10
+#define MV88E1111_SCR_125CLK 0x0010
+static int mpc8568_fixup_125_clock(struct phy_device *phydev)
+{
+ int scr;
+ int err;
+
+ /* Workaround for the 125 CLK Toggle */
+ scr = phy_read(phydev, MV88E1111_SCR);
+
+ if (scr < 0)
+ return scr;
+
+ err = phy_write(phydev, MV88E1111_SCR, scr & ~(MV88E1111_SCR_125CLK));
+
+ if (err)
+ return err;
+
+ err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+
+ if (err)
+ return err;
+
+ scr = phy_read(phydev, MV88E1111_SCR);
+
+ if (scr < 0)
+ return err;
+
+ err = phy_write(phydev, MV88E1111_SCR, scr | 0x0008);
+
+ return err;
+}
+
+static int mpc8568_mds_phy_fixups(struct phy_device *phydev)
+{
+ int temp;
+ int err;
+
+ /* Errata */
+ err = phy_write(phydev,29, 0x0006);
+
+ if (err)
+ return err;
+
+ temp = phy_read(phydev, 30);
+
+ if (temp < 0)
+ return temp;
+
+ temp = (temp & (~0x8000)) | 0x4000;
+ err = phy_write(phydev,30, temp);
+
+ if (err)
+ return err;
+
+ err = phy_write(phydev,29, 0x000a);
+
+ if (err)
+ return err;
+
+ temp = phy_read(phydev, 30);
+
+ if (temp < 0)
+ return temp;
+
+ temp = phy_read(phydev, 30);
+
+ if (temp < 0)
+ return temp;
+
+ temp &= ~0x0020;
+
+ err = phy_write(phydev,30,temp);
+
+ if (err)
+ return err;
+
+ /* Disable automatic MDI/MDIX selection */
+ temp = phy_read(phydev, 16);
+
+ if (temp < 0)
+ return temp;
+
+ temp &= ~0x0060;
+ err = phy_write(phydev,16,temp);
+
+ return err;
+}
+
/* ************************************************************************
*
* Setup the architecture
@@ -64,7 +154,7 @@
static void __init mpc85xx_mds_setup_arch(void)
{
struct device_node *np;
- static u8 *bcsr_regs = NULL;
+ static u8 __iomem *bcsr_regs = NULL;
if (ppc_md.progress)
ppc_md.progress("mpc85xx_mds_setup_arch()", 0);
@@ -138,6 +228,35 @@ static void __init mpc85xx_mds_setup_arch(void)
#endif /* CONFIG_QUICC_ENGINE */
}
+
+static int __init board_fixups(void)
+{
+ char phy_id[BUS_ID_SIZE];
+ char *compstrs[2] = {"fsl,gianfar-mdio", "fsl,ucc-mdio"};
+ struct device_node *mdio;
+ struct resource res;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(compstrs); i++) {
+ mdio = of_find_compatible_node(NULL, NULL, compstrs[i]);
+
+ of_address_to_resource(mdio, 0, &res);
+ snprintf(phy_id, BUS_ID_SIZE, "%x:%02x", res.start, 1);
+
+ phy_register_fixup_for_id(phy_id, mpc8568_fixup_125_clock);
+ phy_register_fixup_for_id(phy_id, mpc8568_mds_phy_fixups);
+
+ /* Register a workaround for errata */
+ snprintf(phy_id, BUS_ID_SIZE, "%x:%02x", res.start, 7);
+ phy_register_fixup_for_id(phy_id, mpc8568_mds_phy_fixups);
+
+ of_node_put(mdio);
+ }
+
+ return 0;
+}
+machine_arch_initcall(mpc85xx_mds, board_fixups);
+
static struct of_device_id mpc85xx_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
diff --git a/arch/powerpc/platforms/85xx/sbc8548.c b/arch/powerpc/platforms/85xx/sbc8548.c
index 488facb99fe8..b9246ea0928a 100644
--- a/arch/powerpc/platforms/85xx/sbc8548.c
+++ b/arch/powerpc/platforms/85xx/sbc8548.c
@@ -49,6 +49,8 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
+static int sbc_rev;
+
static void __init sbc8548_pic_init(void)
{
struct mpic *mpic;
@@ -79,6 +81,30 @@ static void __init sbc8548_pic_init(void)
mpic_init(mpic);
}
+/* Extract the HW Rev from the EPLD on the board */
+static int __init sbc8548_hw_rev(void)
+{
+ struct device_node *np;
+ struct resource res;
+ unsigned int *rev;
+ int board_rev = 0;
+
+ np = of_find_compatible_node(NULL, NULL, "hw-rev");
+ if (np == NULL) {
+ printk("No HW-REV found in DTB.\n");
+ return -ENODEV;
+ }
+
+ of_address_to_resource(np, 0, &res);
+ of_node_put(np);
+
+ rev = ioremap(res.start,sizeof(unsigned int));
+ board_rev = (*rev) >> 28;
+ iounmap(rev);
+
+ return board_rev;
+}
+
/*
* Setup the architecture
*/
@@ -104,6 +130,7 @@ static void __init sbc8548_setup_arch(void)
}
}
#endif
+ sbc_rev = sbc8548_hw_rev();
}
static void sbc8548_show_cpuinfo(struct seq_file *m)
@@ -115,7 +142,7 @@ static void sbc8548_show_cpuinfo(struct seq_file *m)
svid = mfspr(SPRN_SVR);
seq_printf(m, "Vendor\t\t: Wind River\n");
- seq_printf(m, "Machine\t\t: SBC8548\n");
+ seq_printf(m, "Machine\t\t: SBC8548 v%d\n", sbc_rev);
seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
seq_printf(m, "SVR\t\t: 0x%x\n", svid);
@@ -130,6 +157,7 @@ static void sbc8548_show_cpuinfo(struct seq_file *m)
static struct of_device_id __initdata of_bus_ids[] = {
{ .name = "soc", },
{ .type = "soc", },
+ { .compatible = "simple-bus", },
{},
};
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index 5e1e8cf14e75..dea13208bf64 100644
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -43,6 +43,7 @@ static unsigned char *pixis_bdcfg0, *pixis_arch;
static struct of_device_id __initdata mpc8610_ids[] = {
{ .compatible = "fsl,mpc8610-immr", },
+ { .compatible = "simple-bus", },
{}
};
@@ -216,11 +217,21 @@ void mpc8610hpcd_set_gamma_table(int monitor_port, char *gamma_table_base)
}
}
+#define PX_BRDCFG0_DVISEL (1 << 3)
+#define PX_BRDCFG0_DLINK (1 << 4)
+#define PX_BRDCFG0_DIU_MASK (PX_BRDCFG0_DVISEL | PX_BRDCFG0_DLINK)
+
void mpc8610hpcd_set_monitor_port(int monitor_port)
{
- static const u8 bdcfg[] = {0xBD, 0xB5, 0xA5};
+ static const u8 bdcfg[] = {
+ PX_BRDCFG0_DVISEL | PX_BRDCFG0_DLINK,
+ PX_BRDCFG0_DLINK,
+ 0,
+ };
+
if (monitor_port < 3)
- *pixis_bdcfg0 = bdcfg[monitor_port];
+ clrsetbits_8(pixis_bdcfg0, PX_BRDCFG0_DIU_MASK,
+ bdcfg[monitor_port]);
}
void mpc8610hpcd_set_pixel_clock(unsigned int pixclock)
diff --git a/arch/powerpc/platforms/cell/io-workarounds.c b/arch/powerpc/platforms/cell/io-workarounds.c
index 3b84e8be314c..b5f84e8f0899 100644
--- a/arch/powerpc/platforms/cell/io-workarounds.c
+++ b/arch/powerpc/platforms/cell/io-workarounds.c
@@ -118,7 +118,7 @@ static void iowa_##name at \
#undef DEF_PCI_AC_RET
#undef DEF_PCI_AC_NORET
-static struct ppc_pci_io __initdata iowa_pci_io = {
+static const struct ppc_pci_io __devinitconst iowa_pci_io = {
#define DEF_PCI_AC_RET(name, ret, at, al, space, aa) .name = iowa_##name,
#define DEF_PCI_AC_NORET(name, at, al, space, aa) .name = iowa_##name,
@@ -146,7 +146,7 @@ static void __iomem *iowa_ioremap(unsigned long addr, unsigned long size,
}
/* Regist new bus to support workaround */
-void __init iowa_register_bus(struct pci_controller *phb,
+void __devinit iowa_register_bus(struct pci_controller *phb,
struct ppc_pci_io *ops,
int (*initfunc)(struct iowa_bus *, void *), void *data)
{
@@ -173,7 +173,7 @@ void __init iowa_register_bus(struct pci_controller *phb,
}
/* enable IO workaround */
-void __init io_workaround_init(void)
+void __devinit io_workaround_init(void)
{
static int io_workaround_inited;
diff --git a/arch/powerpc/platforms/cell/io-workarounds.h b/arch/powerpc/platforms/cell/io-workarounds.h
index 79d8ed3d510f..6efc7782ebf2 100644
--- a/arch/powerpc/platforms/cell/io-workarounds.h
+++ b/arch/powerpc/platforms/cell/io-workarounds.h
@@ -31,9 +31,9 @@ struct iowa_bus {
void *private;
};
-void __init io_workaround_init(void);
-void __init iowa_register_bus(struct pci_controller *, struct ppc_pci_io *,
- int (*)(struct iowa_bus *, void *), void *);
+void __devinit io_workaround_init(void);
+void __devinit iowa_register_bus(struct pci_controller *, struct ppc_pci_io *,
+ int (*)(struct iowa_bus *, void *), void *);
struct iowa_bus *iowa_mem_find_bus(const PCI_IO_ADDR);
struct iowa_bus *iowa_pio_find_bus(unsigned long);
diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index 80911a373400..c81341ff75b5 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -32,6 +32,7 @@
#include <linux/marker.h>
#include <asm/io.h>
+#include <asm/time.h>
#include <asm/spu.h>
#include <asm/spu_info.h>
#include <asm/uaccess.h>
diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index 2e411f23462b..745dd51ec37f 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -659,7 +659,7 @@ static struct spu *find_victim(struct spu_context *ctx)
victim->stats.invol_ctx_switch++;
spu->stats.invol_ctx_switch++;
- if (test_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags))
+ if (test_bit(SPU_SCHED_SPU_RUN, &victim->sched_flags))
spu_add_to_rq(victim);
mutex_unlock(&victim->state_mutex);
diff --git a/arch/ppc/Makefile b/arch/ppc/Makefile
index 8df7f0e4c3a6..2352d139b262 100644
--- a/arch/ppc/Makefile
+++ b/arch/ppc/Makefile
@@ -43,7 +43,7 @@ KBUILD_AFLAGS += $(cpu-as-y)
KBUILD_CFLAGS += $(cpu-as-y)
# Default to the common case.
-KBUILD_DEFCONFIG := common_defconfig
+KBUILD_DEFCONFIG := ebony_defconfig
head-y := arch/ppc/kernel/head.o
head-$(CONFIG_8xx) := arch/ppc/kernel/head_8xx.o
diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c
index 16ac11ca7ba0..602c268fc8a2 100644
--- a/arch/ppc/kernel/ppc_ksyms.c
+++ b/arch/ppc/kernel/ppc_ksyms.c
@@ -24,6 +24,7 @@
#include <asm/checksum.h>
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
+#include <asm/cacheflush.h>
#include <linux/adb.h>
#include <linux/cuda.h>
#include <linux/pmu.h>
diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c
index bfddfdee0b65..51e8094f52d6 100644
--- a/arch/ppc/kernel/setup.c
+++ b/arch/ppc/kernel/setup.c
@@ -36,6 +36,7 @@
#include <asm/nvram.h>
#include <asm/xmon.h>
#include <asm/ocp.h>
+#include <asm/irq.h>
#define USES_PPC_SYS (defined(CONFIG_MPC10X_BRIDGE) || defined(CONFIG_8260) || \
defined(CONFIG_PPC_MPC52xx))
diff --git a/arch/ppc/platforms/residual.c b/arch/ppc/platforms/residual.c
index 18495e754e30..d687b0f8763b 100644
--- a/arch/ppc/platforms/residual.c
+++ b/arch/ppc/platforms/residual.c
@@ -38,6 +38,7 @@
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/pci.h>
+#include <linux/proc_fs.h>
#include <asm/sections.h>
#include <asm/mmu.h>
diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c
index dff0568e67ec..c93d1296cc0a 100644
--- a/arch/s390/kernel/debug.c
+++ b/arch/s390/kernel/debug.c
@@ -71,7 +71,7 @@ static ssize_t debug_input(struct file *file, const char __user *user_buf,
size_t user_len, loff_t * offset);
static int debug_open(struct inode *inode, struct file *file);
static int debug_close(struct inode *inode, struct file *file);
-static debug_info_t* debug_info_create(char *name, int pages_per_area,
+static debug_info_t *debug_info_create(const char *name, int pages_per_area,
int nr_areas, int buf_size, mode_t mode);
static void debug_info_get(debug_info_t *);
static void debug_info_put(debug_info_t *);
@@ -234,8 +234,8 @@ fail_malloc_areas:
*/
static debug_info_t*
-debug_info_alloc(char *name, int pages_per_area, int nr_areas, int buf_size,
- int level, int mode)
+debug_info_alloc(const char *name, int pages_per_area, int nr_areas,
+ int buf_size, int level, int mode)
{
debug_info_t* rc;
@@ -326,8 +326,8 @@ debug_info_free(debug_info_t* db_info){
*/
static debug_info_t*
-debug_info_create(char *name, int pages_per_area, int nr_areas, int buf_size,
- mode_t mode)
+debug_info_create(const char *name, int pages_per_area, int nr_areas,
+ int buf_size, mode_t mode)
{
debug_info_t* rc;
@@ -684,9 +684,9 @@ debug_close(struct inode *inode, struct file *file)
* - Returns handle for debug area
*/
-debug_info_t *debug_register_mode(char *name, int pages_per_area, int nr_areas,
- int buf_size, mode_t mode, uid_t uid,
- gid_t gid)
+debug_info_t *debug_register_mode(const char *name, int pages_per_area,
+ int nr_areas, int buf_size, mode_t mode,
+ uid_t uid, gid_t gid)
{
debug_info_t *rc = NULL;
@@ -722,8 +722,8 @@ EXPORT_SYMBOL(debug_register_mode);
* - returns handle for debug area
*/
-debug_info_t *debug_register(char *name, int pages_per_area, int nr_areas,
- int buf_size)
+debug_info_t *debug_register(const char *name, int pages_per_area,
+ int nr_areas, int buf_size)
{
return debug_register_mode(name, pages_per_area, nr_areas, buf_size,
S_IRUSR | S_IWUSR, 0, 0);
diff --git a/arch/s390/kernel/irq.c b/arch/s390/kernel/irq.c
index c59a86dca584..e7c5bfb7c755 100644
--- a/arch/s390/kernel/irq.c
+++ b/arch/s390/kernel/irq.c
@@ -25,6 +25,7 @@ int show_interrupts(struct seq_file *p, void *v)
static const char *intrclass_names[] = { "EXT", "I/O", };
int i = *(loff_t *) v, j;
+ get_online_cpus();
if (i == 0) {
seq_puts(p, " ");
for_each_online_cpu(j)
@@ -43,7 +44,7 @@ int show_interrupts(struct seq_file *p, void *v)
seq_putc(p, '\n');
}
-
+ put_online_cpus();
return 0;
}
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 0aeb290060d9..1f4228948dc4 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -139,7 +139,6 @@ static void __smp_call_function_map(void (*func) (void *info), void *info,
if (wait)
data.finished = CPU_MASK_NONE;
- spin_lock(&call_lock);
call_data = &data;
for_each_cpu_mask(cpu, map)
@@ -151,7 +150,6 @@ static void __smp_call_function_map(void (*func) (void *info), void *info,
if (wait)
while (!cpus_equal(map, data.finished))
cpu_relax();
- spin_unlock(&call_lock);
out:
if (local) {
local_irq_disable();
@@ -177,11 +175,11 @@ int smp_call_function(void (*func) (void *info), void *info, int nonatomic,
{
cpumask_t map;
- preempt_disable();
+ spin_lock(&call_lock);
map = cpu_online_map;
cpu_clear(smp_processor_id(), map);
__smp_call_function_map(func, info, nonatomic, wait, map);
- preempt_enable();
+ spin_unlock(&call_lock);
return 0;
}
EXPORT_SYMBOL(smp_call_function);
@@ -202,10 +200,10 @@ EXPORT_SYMBOL(smp_call_function);
int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
int nonatomic, int wait)
{
- preempt_disable();
+ spin_lock(&call_lock);
__smp_call_function_map(func, info, nonatomic, wait,
cpumask_of_cpu(cpu));
- preempt_enable();
+ spin_unlock(&call_lock);
return 0;
}
EXPORT_SYMBOL(smp_call_function_single);
@@ -228,10 +226,10 @@ EXPORT_SYMBOL(smp_call_function_single);
int smp_call_function_mask(cpumask_t mask, void (*func)(void *), void *info,
int wait)
{
- preempt_disable();
+ spin_lock(&call_lock);
cpu_clear(smp_processor_id(), mask);
__smp_call_function_map(func, info, 0, wait, mask);
- preempt_enable();
+ spin_unlock(&call_lock);
return 0;
}
EXPORT_SYMBOL(smp_call_function_mask);
@@ -592,7 +590,9 @@ int __cpuinit start_secondary(void *cpuvoid)
pfault_init();
/* Mark this cpu as online */
+ spin_lock(&call_lock);
cpu_set(smp_processor_id(), cpu_online_map);
+ spin_unlock(&call_lock);
/* Switch on interrupts */
local_irq_enable();
/* Print info about this processor */
diff --git a/arch/s390/mm/vmem.c b/arch/s390/mm/vmem.c
index beccacf907f3..ea2804808f39 100644
--- a/arch/s390/mm/vmem.c
+++ b/arch/s390/mm/vmem.c
@@ -27,19 +27,12 @@ struct memory_segment {
static LIST_HEAD(mem_segs);
-static void __ref *vmem_alloc_pages(unsigned int order)
-{
- if (slab_is_available())
- return (void *)__get_free_pages(GFP_KERNEL, order);
- return alloc_bootmem_pages((1 << order) * PAGE_SIZE);
-}
-
-static inline pud_t *vmem_pud_alloc(void)
+static pud_t *vmem_pud_alloc(void)
{
pud_t *pud = NULL;
#ifdef CONFIG_64BIT
- pud = vmem_alloc_pages(2);
+ pud = vmemmap_alloc_block(PAGE_SIZE * 4, 0);
if (!pud)
return NULL;
clear_table((unsigned long *) pud, _REGION3_ENTRY_EMPTY, PAGE_SIZE * 4);
@@ -47,12 +40,12 @@ static inline pud_t *vmem_pud_alloc(void)
return pud;
}
-static inline pmd_t *vmem_pmd_alloc(void)
+static pmd_t *vmem_pmd_alloc(void)
{
pmd_t *pmd = NULL;
#ifdef CONFIG_64BIT
- pmd = vmem_alloc_pages(2);
+ pmd = vmemmap_alloc_block(PAGE_SIZE * 4, 0);
if (!pmd)
return NULL;
clear_table((unsigned long *) pmd, _SEGMENT_ENTRY_EMPTY, PAGE_SIZE * 4);
@@ -60,7 +53,7 @@ static inline pmd_t *vmem_pmd_alloc(void)
return pmd;
}
-static pte_t __init_refok *vmem_pte_alloc(void)
+static pte_t __ref *vmem_pte_alloc(void)
{
pte_t *pte;
@@ -214,7 +207,7 @@ int __meminit vmemmap_populate(struct page *start, unsigned long nr, int node)
if (pte_none(*pt_dir)) {
unsigned long new_page;
- new_page =__pa(vmem_alloc_pages(0));
+ new_page =__pa(vmemmap_alloc_block(PAGE_SIZE, 0));
if (!new_page)
goto out;
pte = pfn_pte(new_page >> PAGE_SHIFT, PAGE_KERNEL);
diff --git a/arch/sh/kernel/kgdb_stub.c b/arch/sh/kernel/kgdb_stub.c
index d453c3a1c79f..832641bbd47d 100644
--- a/arch/sh/kernel/kgdb_stub.c
+++ b/arch/sh/kernel/kgdb_stub.c
@@ -330,14 +330,6 @@ static char *ebin_to_mem(const char *buf, char *mem, int count)
return mem;
}
-/* Pack a hex byte */
-static char *pack_hex_byte(char *pkt, int byte)
-{
- *pkt++ = hexchars[(byte >> 4) & 0xf];
- *pkt++ = hexchars[(byte & 0xf)];
- return pkt;
-}
-
/* Scan for the start char '$', read the packet and check the checksum */
static void get_packet(char *buffer, int buflen)
{
diff --git a/arch/sparc/kernel/rtrap.S b/arch/sparc/kernel/rtrap.S
index b27b5b56f77a..ab818cdc4cc0 100644
--- a/arch/sparc/kernel/rtrap.S
+++ b/arch/sparc/kernel/rtrap.S
@@ -139,7 +139,7 @@ ret_trap_userwins_ok:
LOAD_PT_PRIV(sp, t_psr, t_pc, t_npc)
or %t_pc, %t_npc, %g2
andcc %g2, 0x3, %g0
- sethi %hi(PSR_SYCALL), %g2
+ sethi %hi(PSR_SYSCALL), %g2
be 1f
andn %t_psr, %g2, %t_psr
diff --git a/arch/sparc/kernel/sys_sparc.c b/arch/sparc/kernel/sys_sparc.c
index e995491c4436..3c6b49a53ae8 100644
--- a/arch/sparc/kernel/sys_sparc.c
+++ b/arch/sparc/kernel/sys_sparc.c
@@ -219,7 +219,7 @@ out:
return err;
}
-int sparc_mmap_check(unsigned long addr, unsigned long len, unsigned long flags)
+int sparc_mmap_check(unsigned long addr, unsigned long len)
{
if (ARCH_SUN4C_SUN4 &&
(len > 0x20000000 ||
@@ -295,52 +295,14 @@ asmlinkage unsigned long sparc_mremap(unsigned long addr,
unsigned long old_len, unsigned long new_len,
unsigned long flags, unsigned long new_addr)
{
- struct vm_area_struct *vma;
unsigned long ret = -EINVAL;
- if (ARCH_SUN4C_SUN4) {
- if (old_len > 0x20000000 || new_len > 0x20000000)
- goto out;
- if (addr < 0xe0000000 && addr + old_len > 0x20000000)
- goto out;
- }
- if (old_len > TASK_SIZE - PAGE_SIZE ||
- new_len > TASK_SIZE - PAGE_SIZE)
+
+ if (unlikely(sparc_mmap_check(addr, old_len)))
+ goto out;
+ if (unlikely(sparc_mmap_check(new_addr, new_len)))
goto out;
down_write(&current->mm->mmap_sem);
- if (flags & MREMAP_FIXED) {
- if (ARCH_SUN4C_SUN4 &&
- new_addr < 0xe0000000 &&
- new_addr + new_len > 0x20000000)
- goto out_sem;
- if (new_addr + new_len > TASK_SIZE - PAGE_SIZE)
- goto out_sem;
- } else if ((ARCH_SUN4C_SUN4 && addr < 0xe0000000 &&
- addr + new_len > 0x20000000) ||
- addr + new_len > TASK_SIZE - PAGE_SIZE) {
- unsigned long map_flags = 0;
- struct file *file = NULL;
-
- ret = -ENOMEM;
- if (!(flags & MREMAP_MAYMOVE))
- goto out_sem;
-
- vma = find_vma(current->mm, addr);
- if (vma) {
- if (vma->vm_flags & VM_SHARED)
- map_flags |= MAP_SHARED;
- file = vma->vm_file;
- }
-
- new_addr = get_unmapped_area(file, addr, new_len,
- vma ? vma->vm_pgoff : 0,
- map_flags);
- ret = new_addr;
- if (new_addr & ~PAGE_MASK)
- goto out_sem;
- flags |= MREMAP_FIXED;
- }
ret = do_mremap(addr, old_len, new_len, flags, new_addr);
-out_sem:
up_write(&current->mm->mmap_sem);
out:
return ret;
diff --git a/arch/sparc64/kernel/rtrap.S b/arch/sparc64/kernel/rtrap.S
index b9b785fd8b46..16689b2930db 100644
--- a/arch/sparc64/kernel/rtrap.S
+++ b/arch/sparc64/kernel/rtrap.S
@@ -46,7 +46,7 @@ __handle_user_windows:
wrpr %g0, RTRAP_PSTATE_IRQOFF, %pstate
ldx [%g6 + TI_FLAGS], %l0
-1: andcc %l0, (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK), %g0
+1: andcc %l0, _TIF_SIGPENDING, %g0
be,pt %xcc, __handle_user_windows_continue
nop
mov %l5, %o1
@@ -86,7 +86,7 @@ __handle_perfctrs:
wrpr %g0, RTRAP_PSTATE, %pstate
wrpr %g0, RTRAP_PSTATE_IRQOFF, %pstate
ldx [%g6 + TI_FLAGS], %l0
-1: andcc %l0, (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK), %g0
+1: andcc %l0, _TIF_SIGPENDING, %g0
be,pt %xcc, __handle_perfctrs_continue
sethi %hi(TSTATE_PEF), %o0
@@ -195,7 +195,7 @@ __handle_preemption_continue:
andcc %l1, %o0, %g0
andcc %l0, _TIF_NEED_RESCHED, %g0
bne,pn %xcc, __handle_preemption
- andcc %l0, (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK), %g0
+ andcc %l0, _TIF_SIGPENDING, %g0
bne,pn %xcc, __handle_signal
__handle_signal_continue:
ldub [%g6 + TI_WSAVED], %o2
diff --git a/arch/sparc64/kernel/signal.c b/arch/sparc64/kernel/signal.c
index 2378482c2aab..6e4dc67d16af 100644
--- a/arch/sparc64/kernel/signal.c
+++ b/arch/sparc64/kernel/signal.c
@@ -247,7 +247,9 @@ static long _sigpause_common(old_sigset_t set)
current->state = TASK_INTERRUPTIBLE;
schedule();
- set_thread_flag(TIF_RESTORE_SIGMASK);
+
+ set_restore_sigmask();
+
return -ERESTARTNOHAND;
}
@@ -537,7 +539,7 @@ static void do_signal(struct pt_regs *regs, unsigned long orig_i0)
} else
restart_syscall = 0;
- if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ if (current_thread_info()->status & TS_RESTORE_SIGMASK)
oldset = &current->saved_sigmask;
else
oldset = &current->blocked;
@@ -566,13 +568,12 @@ static void do_signal(struct pt_regs *regs, unsigned long orig_i0)
syscall_restart(orig_i0, regs, &ka.sa);
handle_signal(signr, &ka, &info, oldset, regs);
- /* a signal was successfully delivered; the saved
+ /* A signal was successfully delivered; the saved
* sigmask will have been stored in the signal frame,
* and will be restored by sigreturn, so we can simply
- * clear the TIF_RESTORE_SIGMASK flag.
+ * clear the TS_RESTORE_SIGMASK flag.
*/
- if (test_thread_flag(TIF_RESTORE_SIGMASK))
- clear_thread_flag(TIF_RESTORE_SIGMASK);
+ current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
return;
}
if (restart_syscall &&
@@ -591,17 +592,17 @@ static void do_signal(struct pt_regs *regs, unsigned long orig_i0)
regs->tnpc -= 4;
}
- /* if there's no signal to deliver, we just put the saved sigmask
+ /* If there's no signal to deliver, we just put the saved sigmask
* back
*/
- if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
- clear_thread_flag(TIF_RESTORE_SIGMASK);
+ if (current_thread_info()->status & TS_RESTORE_SIGMASK) {
+ current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
}
}
void do_notify_resume(struct pt_regs *regs, unsigned long orig_i0, unsigned long thread_info_flags)
{
- if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
+ if (thread_info_flags & _TIF_SIGPENDING)
do_signal(regs, orig_i0);
}
diff --git a/arch/sparc64/kernel/signal32.c b/arch/sparc64/kernel/signal32.c
index 3f19e9af3d1b..97cdd1bf4a10 100644
--- a/arch/sparc64/kernel/signal32.c
+++ b/arch/sparc64/kernel/signal32.c
@@ -788,13 +788,12 @@ void do_signal32(sigset_t *oldset, struct pt_regs * regs,
syscall_restart32(orig_i0, regs, &ka.sa);
handle_signal32(signr, &ka, &info, oldset, regs);
- /* a signal was successfully delivered; the saved
+ /* A signal was successfully delivered; the saved
* sigmask will have been stored in the signal frame,
* and will be restored by sigreturn, so we can simply
- * clear the TIF_RESTORE_SIGMASK flag.
+ * clear the TS_RESTORE_SIGMASK flag.
*/
- if (test_thread_flag(TIF_RESTORE_SIGMASK))
- clear_thread_flag(TIF_RESTORE_SIGMASK);
+ current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
return;
}
if (restart_syscall &&
@@ -813,11 +812,11 @@ void do_signal32(sigset_t *oldset, struct pt_regs * regs,
regs->tnpc -= 4;
}
- /* if there's no signal to deliver, we just put the saved sigmask
+ /* If there's no signal to deliver, we just put the saved sigmask
* back
*/
- if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
- clear_thread_flag(TIF_RESTORE_SIGMASK);
+ if (current_thread_info()->status & TS_RESTORE_SIGMASK) {
+ current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
}
}
diff --git a/arch/sparc64/kernel/sys_sparc.c b/arch/sparc64/kernel/sys_sparc.c
index 0dbc941f130e..ac1bff58c1ac 100644
--- a/arch/sparc64/kernel/sys_sparc.c
+++ b/arch/sparc64/kernel/sys_sparc.c
@@ -542,8 +542,7 @@ asmlinkage long sparc64_personality(unsigned long personality)
return ret;
}
-int sparc64_mmap_check(unsigned long addr, unsigned long len,
- unsigned long flags)
+int sparc64_mmap_check(unsigned long addr, unsigned long len)
{
if (test_thread_flag(TIF_32BIT)) {
if (len >= STACK_TOP32)
@@ -609,46 +608,19 @@ asmlinkage unsigned long sys64_mremap(unsigned long addr,
unsigned long old_len, unsigned long new_len,
unsigned long flags, unsigned long new_addr)
{
- struct vm_area_struct *vma;
unsigned long ret = -EINVAL;
if (test_thread_flag(TIF_32BIT))
goto out;
if (unlikely(new_len >= VA_EXCLUDE_START))
goto out;
- if (unlikely(invalid_64bit_range(addr, old_len)))
+ if (unlikely(sparc64_mmap_check(addr, old_len)))
+ goto out;
+ if (unlikely(sparc64_mmap_check(new_addr, new_len)))
goto out;
down_write(&current->mm->mmap_sem);
- if (flags & MREMAP_FIXED) {
- if (invalid_64bit_range(new_addr, new_len))
- goto out_sem;
- } else if (invalid_64bit_range(addr, new_len)) {
- unsigned long map_flags = 0;
- struct file *file = NULL;
-
- ret = -ENOMEM;
- if (!(flags & MREMAP_MAYMOVE))
- goto out_sem;
-
- vma = find_vma(current->mm, addr);
- if (vma) {
- if (vma->vm_flags & VM_SHARED)
- map_flags |= MAP_SHARED;
- file = vma->vm_file;
- }
-
- /* MREMAP_FIXED checked above. */
- new_addr = get_unmapped_area(file, addr, new_len,
- vma ? vma->vm_pgoff : 0,
- map_flags);
- ret = new_addr;
- if (new_addr & ~PAGE_MASK)
- goto out_sem;
- flags |= MREMAP_FIXED;
- }
ret = do_mremap(addr, old_len, new_len, flags, new_addr);
-out_sem:
up_write(&current->mm->mmap_sem);
out:
return ret;
diff --git a/arch/sparc64/kernel/sys_sparc32.c b/arch/sparc64/kernel/sys_sparc32.c
index 1aa4288125f2..ba5bd626b39e 100644
--- a/arch/sparc64/kernel/sys_sparc32.c
+++ b/arch/sparc64/kernel/sys_sparc32.c
@@ -867,44 +867,15 @@ asmlinkage unsigned long sys32_mremap(unsigned long addr,
unsigned long old_len, unsigned long new_len,
unsigned long flags, u32 __new_addr)
{
- struct vm_area_struct *vma;
unsigned long ret = -EINVAL;
unsigned long new_addr = __new_addr;
- if (old_len > STACK_TOP32 || new_len > STACK_TOP32)
+ if (unlikely(sparc64_mmap_check(addr, old_len)))
goto out;
- if (addr > STACK_TOP32 - old_len)
+ if (unlikely(sparc64_mmap_check(new_addr, new_len)))
goto out;
down_write(&current->mm->mmap_sem);
- if (flags & MREMAP_FIXED) {
- if (new_addr > STACK_TOP32 - new_len)
- goto out_sem;
- } else if (addr > STACK_TOP32 - new_len) {
- unsigned long map_flags = 0;
- struct file *file = NULL;
-
- ret = -ENOMEM;
- if (!(flags & MREMAP_MAYMOVE))
- goto out_sem;
-
- vma = find_vma(current->mm, addr);
- if (vma) {
- if (vma->vm_flags & VM_SHARED)
- map_flags |= MAP_SHARED;
- file = vma->vm_file;
- }
-
- /* MREMAP_FIXED checked above. */
- new_addr = get_unmapped_area(file, addr, new_len,
- vma ? vma->vm_pgoff : 0,
- map_flags);
- ret = new_addr;
- if (new_addr & ~PAGE_MASK)
- goto out_sem;
- flags |= MREMAP_FIXED;
- }
ret = do_mremap(addr, old_len, new_len, flags, new_addr);
-out_sem:
up_write(&current->mm->mmap_sem);
out:
return ret;
diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c
index ec3e2c72302a..a9828d748e2c 100644
--- a/arch/sparc64/mm/init.c
+++ b/arch/sparc64/mm/init.c
@@ -610,8 +610,6 @@ static void __init remap_kernel(void)
static void __init inherit_prom_mappings(void)
{
- read_obp_translations();
-
/* Now fixup OBP's idea about where we really are mapped. */
printk("Remapping the kernel... ");
remap_kernel();
@@ -1747,7 +1745,17 @@ void __init paging_init(void)
lmb_init();
- /* Find available physical memory... */
+ /* Find available physical memory...
+ *
+ * Read it twice in order to work around a bug in openfirmware.
+ * The call to grab this table itself can cause openfirmware to
+ * allocate memory, which in turn can take away some space from
+ * the list of available memory. Reading it twice makes sure
+ * we really do get the final value.
+ */
+ read_obp_translations();
+ read_obp_memory("reg", &pall[0], &pall_ents);
+ read_obp_memory("available", &pavail[0], &pavail_ents);
read_obp_memory("available", &pavail[0], &pavail_ents);
phys_base = 0xffffffffffffffffUL;
@@ -1788,8 +1796,6 @@ void __init paging_init(void)
inherit_prom_mappings();
- read_obp_memory("reg", &pall[0], &pall_ents);
-
init_kpte_bitmap();
/* Ok, we can use our TLB miss and window trap handlers safely. */
diff --git a/arch/um/Kconfig.char b/arch/um/Kconfig.char
index 3a4b396d7979..1b238ebae6b3 100644
--- a/arch/um/Kconfig.char
+++ b/arch/um/Kconfig.char
@@ -145,14 +145,14 @@ config LEGACY_PTYS
systems, it is safe to say N.
config RAW_DRIVER
- tristate "RAW driver (/dev/raw/rawN) (OBSOLETE)"
+ tristate "RAW driver (/dev/raw/rawN)"
+ depends on BLOCK
help
The raw driver permits block devices to be bound to /dev/raw/rawN.
Once bound, I/O against /dev/raw/rawN uses efficient zero-copy I/O.
See the raw(8) manpage for more details.
- The raw driver is deprecated and will be removed soon.
- Applications should simply open the device (eg /dev/hda1)
+ Applications should preferably open the device (eg /dev/hda1)
with the O_DIRECT flag.
config MAX_RAW_DEVS
diff --git a/arch/um/drivers/chan_user.c b/arch/um/drivers/chan_user.c
index 025764089ac8..cfeb3f4a44af 100644
--- a/arch/um/drivers/chan_user.c
+++ b/arch/um/drivers/chan_user.c
@@ -11,6 +11,7 @@
#include <termios.h>
#include <sys/ioctl.h>
#include "chan_user.h"
+#include "kern_constants.h"
#include "os.h"
#include "um_malloc.h"
#include "user.h"
diff --git a/arch/um/drivers/cow_sys.h b/arch/um/drivers/cow_sys.h
index ca8c9e11a39b..f5701fd2ef90 100644
--- a/arch/um/drivers/cow_sys.h
+++ b/arch/um/drivers/cow_sys.h
@@ -8,7 +8,7 @@
static inline void *cow_malloc(int size)
{
- return kmalloc(size, UM_GFP_KERNEL);
+ return uml_kmalloc(size, UM_GFP_KERNEL);
}
static inline void cow_free(void *ptr)
diff --git a/arch/um/drivers/daemon_user.c b/arch/um/drivers/daemon_user.c
index f23c109a055c..f8e85e0bdace 100644
--- a/arch/um/drivers/daemon_user.c
+++ b/arch/um/drivers/daemon_user.c
@@ -34,7 +34,7 @@ static struct sockaddr_un *new_addr(void *name, int len)
{
struct sockaddr_un *sun;
- sun = kmalloc(sizeof(struct sockaddr_un), UM_GFP_KERNEL);
+ sun = uml_kmalloc(sizeof(struct sockaddr_un), UM_GFP_KERNEL);
if (sun == NULL) {
printk(UM_KERN_ERR "new_addr: allocation of sockaddr_un "
"failed\n");
@@ -83,7 +83,7 @@ static int connect_to_switch(struct daemon_data *pri)
goto out_close;
}
- sun = kmalloc(sizeof(struct sockaddr_un), UM_GFP_KERNEL);
+ sun = uml_kmalloc(sizeof(struct sockaddr_un), UM_GFP_KERNEL);
if (sun == NULL) {
printk(UM_KERN_ERR "new_addr: allocation of sockaddr_un "
"failed\n");
diff --git a/arch/um/drivers/fd.c b/arch/um/drivers/fd.c
index 0a2bb5b64b82..f5a981a16240 100644
--- a/arch/um/drivers/fd.c
+++ b/arch/um/drivers/fd.c
@@ -40,7 +40,7 @@ static void *fd_init(char *str, int device, const struct chan_opts *opts)
return NULL;
}
- data = kmalloc(sizeof(*data), UM_GFP_KERNEL);
+ data = uml_kmalloc(sizeof(*data), UM_GFP_KERNEL);
if (data == NULL)
return NULL;
diff --git a/arch/um/drivers/hostaudio_kern.c b/arch/um/drivers/hostaudio_kern.c
index ff1b22b69e9c..368219cc2366 100644
--- a/arch/um/drivers/hostaudio_kern.c
+++ b/arch/um/drivers/hostaudio_kern.c
@@ -154,7 +154,7 @@ static int hostaudio_ioctl(struct inode *inode, struct file *file,
case SNDCTL_DSP_SUBDIVIDE:
case SNDCTL_DSP_SETFRAGMENT:
if (get_user(data, (int __user *) arg))
- return EFAULT;
+ return -EFAULT;
break;
default:
break;
diff --git a/arch/um/drivers/mcast_user.c b/arch/um/drivers/mcast_user.c
index 5f647d7a7292..ee19e91568a2 100644
--- a/arch/um/drivers/mcast_user.c
+++ b/arch/um/drivers/mcast_user.c
@@ -15,6 +15,7 @@
#include <unistd.h>
#include <errno.h>
#include <netinet/in.h>
+#include "kern_constants.h"
#include "mcast.h"
#include "net_user.h"
#include "um_malloc.h"
@@ -24,7 +25,7 @@ static struct sockaddr_in *new_addr(char *addr, unsigned short port)
{
struct sockaddr_in *sin;
- sin = kmalloc(sizeof(struct sockaddr_in), UM_GFP_KERNEL);
+ sin = uml_kmalloc(sizeof(struct sockaddr_in), UM_GFP_KERNEL);
if (sin == NULL) {
printk(UM_KERN_ERR "new_addr: allocation of sockaddr_in "
"failed\n");
diff --git a/arch/um/drivers/net_user.c b/arch/um/drivers/net_user.c
index abf2653f5517..9415dd9e63ef 100644
--- a/arch/um/drivers/net_user.c
+++ b/arch/um/drivers/net_user.c
@@ -222,7 +222,7 @@ static void change(char *dev, char *what, unsigned char *addr,
netmask[2], netmask[3]);
output_len = UM_KERN_PAGE_SIZE;
- output = kmalloc(output_len, UM_GFP_KERNEL);
+ output = uml_kmalloc(output_len, UM_GFP_KERNEL);
if (output == NULL)
printk(UM_KERN_ERR "change : failed to allocate output "
"buffer\n");
diff --git a/arch/um/drivers/port_user.c b/arch/um/drivers/port_user.c
index d269ca387f10..b49bf56a56aa 100644
--- a/arch/um/drivers/port_user.c
+++ b/arch/um/drivers/port_user.c
@@ -47,7 +47,7 @@ static void *port_init(char *str, int device, const struct chan_opts *opts)
if (kern_data == NULL)
return NULL;
- data = kmalloc(sizeof(*data), UM_GFP_KERNEL);
+ data = uml_kmalloc(sizeof(*data), UM_GFP_KERNEL);
if (data == NULL)
goto err;
diff --git a/arch/um/drivers/pty.c b/arch/um/drivers/pty.c
index 49c79dda6046..1113911dcb2b 100644
--- a/arch/um/drivers/pty.c
+++ b/arch/um/drivers/pty.c
@@ -29,7 +29,7 @@ static void *pty_chan_init(char *str, int device, const struct chan_opts *opts)
{
struct pty_chan *data;
- data = kmalloc(sizeof(*data), UM_GFP_KERNEL);
+ data = uml_kmalloc(sizeof(*data), UM_GFP_KERNEL);
if (data == NULL)
return NULL;
diff --git a/arch/um/drivers/random.c b/arch/um/drivers/random.c
index 71f0959c1535..4949044773ba 100644
--- a/arch/um/drivers/random.c
+++ b/arch/um/drivers/random.c
@@ -1,4 +1,5 @@
-/* Copyright (C) 2005 Jeff Dike <jdike@addtoit.com> */
+/* Copyright (C) 2005 - 2008 Jeff Dike <jdike@{linux.intel,addtoit}.com> */
+
/* Much of this ripped from drivers/char/hw_random.c, see there for other
* copyright.
*
@@ -8,16 +9,18 @@
#include <linux/sched.h>
#include <linux/module.h>
#include <linux/fs.h>
+#include <linux/interrupt.h>
#include <linux/miscdevice.h>
#include <linux/delay.h>
#include <asm/uaccess.h>
+#include "irq_kern.h"
#include "os.h"
/*
* core module and version information
*/
#define RNG_VERSION "1.0.0"
-#define RNG_MODULE_NAME "random"
+#define RNG_MODULE_NAME "hw_random"
#define RNG_MISCDEV_MINOR 183 /* official */
@@ -26,47 +29,67 @@
* protects against a module being loaded twice at the same time.
*/
static int random_fd = -1;
+static DECLARE_WAIT_QUEUE_HEAD(host_read_wait);
static int rng_dev_open (struct inode *inode, struct file *filp)
{
/* enforce read-only access to this chrdev */
if ((filp->f_mode & FMODE_READ) == 0)
return -EINVAL;
- if (filp->f_mode & FMODE_WRITE)
+ if ((filp->f_mode & FMODE_WRITE) != 0)
return -EINVAL;
return 0;
}
+static atomic_t host_sleep_count = ATOMIC_INIT(0);
+
static ssize_t rng_dev_read (struct file *filp, char __user *buf, size_t size,
- loff_t * offp)
+ loff_t *offp)
{
- u32 data;
- int n, ret = 0, have_data;
-
- while(size){
- n = os_read_file(random_fd, &data, sizeof(data));
- if(n > 0){
- have_data = n;
- while (have_data && size) {
- if (put_user((u8)data, buf++)) {
- ret = ret ? : -EFAULT;
- break;
- }
- size--;
- ret++;
- have_data--;
- data>>=8;
- }
- }
- else if(n == -EAGAIN){
- if (filp->f_flags & O_NONBLOCK)
- return ret ? : -EAGAIN;
-
- if(need_resched())
- schedule_timeout_interruptible(1);
- }
- else return n;
+ u32 data;
+ int n, ret = 0, have_data;
+
+ while (size) {
+ n = os_read_file(random_fd, &data, sizeof(data));
+ if (n > 0) {
+ have_data = n;
+ while (have_data && size) {
+ if (put_user((u8) data, buf++)) {
+ ret = ret ? : -EFAULT;
+ break;
+ }
+ size--;
+ ret++;
+ have_data--;
+ data >>= 8;
+ }
+ }
+ else if (n == -EAGAIN) {
+ DECLARE_WAITQUEUE(wait, current);
+
+ if (filp->f_flags & O_NONBLOCK)
+ return ret ? : -EAGAIN;
+
+ atomic_inc(&host_sleep_count);
+ reactivate_fd(random_fd, RANDOM_IRQ);
+ add_sigio_fd(random_fd);
+
+ add_wait_queue(&host_read_wait, &wait);
+ set_task_state(current, TASK_INTERRUPTIBLE);
+
+ schedule();
+ set_task_state(current, TASK_RUNNING);
+ remove_wait_queue(&host_read_wait, &wait);
+
+ if (atomic_dec_and_test(&host_sleep_count)) {
+ ignore_sigio_fd(random_fd);
+ deactivate_fd(random_fd, RANDOM_IRQ);
+ }
+ }
+ else
+ return n;
+
if (signal_pending (current))
return ret ? : -ERESTARTSYS;
}
@@ -86,6 +109,13 @@ static struct miscdevice rng_miscdev = {
&rng_chrdev_ops,
};
+static irqreturn_t random_interrupt(int irq, void *data)
+{
+ wake_up(&host_read_wait);
+
+ return IRQ_HANDLED;
+}
+
/*
* rng_init - initialize RNG module
*/
@@ -93,28 +123,33 @@ static int __init rng_init (void)
{
int err;
- err = os_open_file("/dev/random", of_read(OPENFLAGS()), 0);
- if(err < 0)
- goto out;
+ err = os_open_file("/dev/random", of_read(OPENFLAGS()), 0);
+ if (err < 0)
+ goto out;
- random_fd = err;
+ random_fd = err;
- err = os_set_fd_block(random_fd, 0);
- if(err)
+ err = um_request_irq(RANDOM_IRQ, random_fd, IRQ_READ, random_interrupt,
+ IRQF_DISABLED | IRQF_SAMPLE_RANDOM, "random",
+ NULL);
+ if (err)
goto err_out_cleanup_hw;
+ sigio_broken(random_fd, 1);
+
err = misc_register (&rng_miscdev);
if (err) {
- printk (KERN_ERR RNG_MODULE_NAME ": misc device register failed\n");
+ printk (KERN_ERR RNG_MODULE_NAME ": misc device register "
+ "failed\n");
goto err_out_cleanup_hw;
}
+out:
+ return err;
- out:
- return err;
-
- err_out_cleanup_hw:
- random_fd = -1;
- goto out;
+err_out_cleanup_hw:
+ os_close_file(random_fd);
+ random_fd = -1;
+ goto out;
}
/*
@@ -122,6 +157,7 @@ static int __init rng_init (void)
*/
static void __exit rng_cleanup (void)
{
+ os_close_file(random_fd);
misc_deregister (&rng_miscdev);
}
diff --git a/arch/um/drivers/slip_user.c b/arch/um/drivers/slip_user.c
index 8b80505a3fb0..a1c2d2c98a94 100644
--- a/arch/um/drivers/slip_user.c
+++ b/arch/um/drivers/slip_user.c
@@ -96,7 +96,7 @@ static int slip_tramp(char **argv, int fd)
pid = err;
output_len = UM_KERN_PAGE_SIZE;
- output = kmalloc(output_len, UM_GFP_KERNEL);
+ output = uml_kmalloc(output_len, UM_GFP_KERNEL);
if (output == NULL) {
printk(UM_KERN_ERR "slip_tramp : failed to allocate output "
"buffer\n");
diff --git a/arch/um/drivers/tty.c b/arch/um/drivers/tty.c
index c930fedc5172..495858a090e4 100644
--- a/arch/um/drivers/tty.c
+++ b/arch/um/drivers/tty.c
@@ -29,7 +29,7 @@ static void *tty_chan_init(char *str, int device, const struct chan_opts *opts)
}
str++;
- data = kmalloc(sizeof(*data), UM_GFP_KERNEL);
+ data = uml_kmalloc(sizeof(*data), UM_GFP_KERNEL);
if (data == NULL)
return NULL;
*data = ((struct tty_chan) { .dev = str,
diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
index 5e45e39a8a8d..44ad1607be2d 100644
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -1178,8 +1178,8 @@ static void cowify_bitmap(__u64 io_offset, int length, unsigned long *cow_mask,
* by one word. Thanks to Lynn Kerby for the fix and James McMechan
* for the original diagnosis.
*/
- if(*cow_offset == ((bitmap_len + sizeof(unsigned long) - 1) /
- sizeof(unsigned long) - 1))
+ if (*cow_offset == (DIV_ROUND_UP(bitmap_len,
+ sizeof(unsigned long)) - 1))
(*cow_offset)--;
bitmap_words[0] = bitmap[*cow_offset];
diff --git a/arch/um/drivers/xterm.c b/arch/um/drivers/xterm.c
index 8a1c18a9b240..da2caa5a21ef 100644
--- a/arch/um/drivers/xterm.c
+++ b/arch/um/drivers/xterm.c
@@ -30,7 +30,7 @@ static void *xterm_init(char *str, int device, const struct chan_opts *opts)
{
struct xterm_chan *data;
- data = kmalloc(sizeof(*data), UM_GFP_KERNEL);
+ data = uml_kmalloc(sizeof(*data), UM_GFP_KERNEL);
if (data == NULL)
return NULL;
*data = ((struct xterm_chan) { .pid = -1,
diff --git a/arch/um/include/as-layout.h b/arch/um/include/as-layout.h
index cac542d8ff70..58e852dfb0ce 100644
--- a/arch/um/include/as-layout.h
+++ b/arch/um/include/as-layout.h
@@ -23,16 +23,16 @@
*/
#ifdef __ASSEMBLY__
-#define _AC(X, Y) (Y)
+#define _UML_AC(X, Y) (Y)
#else
-#define __AC(X, Y) (X (Y))
-#define _AC(X, Y) __AC(X, Y)
+#define __UML_AC(X, Y) (X(Y))
+#define _UML_AC(X, Y) __UML_AC(X, Y)
#endif
-#define STUB_START _AC(, 0x100000)
-#define STUB_CODE _AC((unsigned long), STUB_START)
-#define STUB_DATA _AC((unsigned long), STUB_CODE + UM_KERN_PAGE_SIZE)
-#define STUB_END _AC((unsigned long), STUB_DATA + UM_KERN_PAGE_SIZE)
+#define STUB_START _UML_AC(, 0x100000)
+#define STUB_CODE _UML_AC((unsigned long), STUB_START)
+#define STUB_DATA _UML_AC((unsigned long), STUB_CODE + UM_KERN_PAGE_SIZE)
+#define STUB_END _UML_AC((unsigned long), STUB_DATA + UM_KERN_PAGE_SIZE)
#ifndef __ASSEMBLY__
diff --git a/arch/um/include/line.h b/arch/um/include/line.h
index 979b73e6352d..311a0d3d93af 100644
--- a/arch/um/include/line.h
+++ b/arch/um/include/line.h
@@ -58,11 +58,11 @@ struct line {
};
#define LINE_INIT(str, d) \
- { .count_lock = SPIN_LOCK_UNLOCKED, \
+ { .count_lock = __SPIN_LOCK_UNLOCKED((str).count_lock), \
.init_str = str, \
.init_pri = INIT_STATIC, \
.valid = 1, \
- .lock = SPIN_LOCK_UNLOCKED, \
+ .lock = __SPIN_LOCK_UNLOCKED((str).lock), \
.driver = d }
extern void line_close(struct tty_struct *tty, struct file * filp);
diff --git a/arch/um/include/os.h b/arch/um/include/os.h
index 32c799e3a495..e2716ac8889a 100644
--- a/arch/um/include/os.h
+++ b/arch/um/include/os.h
@@ -290,6 +290,7 @@ extern void os_set_ioignore(void);
extern int add_sigio_fd(int fd);
extern int ignore_sigio_fd(int fd);
extern void maybe_sigio_broken(int fd, int read);
+extern void sigio_broken(int fd, int read);
/* sys-x86_64/prctl.c */
extern int os_arch_prctl(int pid, int code, unsigned long *addr);
diff --git a/arch/um/include/process.h b/arch/um/include/process.h
index 5af9157ff54f..bb873a51262e 100644
--- a/arch/um/include/process.h
+++ b/arch/um/include/process.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2000 - 2008 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
@@ -8,18 +8,10 @@
#include <signal.h>
-extern void sig_handler(int sig, struct sigcontext sc);
-extern void alarm_handler(int sig, struct sigcontext sc);
+/* Copied from linux/compiler-gcc.h since we can't include it directly */
+#define barrier() __asm__ __volatile__("": : :"memory")
-#endif
+extern void sig_handler(int sig, struct sigcontext *sc);
+extern void alarm_handler(int sig, struct sigcontext *sc);
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
+#endif
diff --git a/arch/um/include/skas_ptrace.h b/arch/um/include/skas_ptrace.h
index cd2327d09c8d..3d31bbacd016 100644
--- a/arch/um/include/skas_ptrace.h
+++ b/arch/um/include/skas_ptrace.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
@@ -12,14 +12,3 @@
#include "sysdep/skas_ptrace.h"
#endif
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/include/sysdep-i386/ptrace_user.h b/arch/um/include/sysdep-i386/ptrace_user.h
index 75650723c38f..ef56247e4143 100644
--- a/arch/um/include/sysdep-i386/ptrace_user.h
+++ b/arch/um/include/sysdep-i386/ptrace_user.h
@@ -41,38 +41,10 @@
#define PT_SP_OFFSET PT_OFFSET(UESP)
#define PT_SP(regs) ((regs)[UESP])
-#define FP_SIZE ((HOST_XFP_SIZE > HOST_FP_SIZE) ? HOST_XFP_SIZE : HOST_FP_SIZE)
+#define FP_SIZE ((HOST_FPX_SIZE > HOST_FP_SIZE) ? HOST_FPX_SIZE : HOST_FP_SIZE)
#ifndef FRAME_SIZE
#define FRAME_SIZE (17)
#endif
-#define FRAME_SIZE_OFFSET (FRAME_SIZE * sizeof(unsigned long))
-
-#define FP_FRAME_SIZE (27)
-#define FPX_FRAME_SIZE (128)
-
-#ifdef PTRACE_GETREGS
-#define UM_HAVE_GETREGS
-#endif
-
-#ifdef PTRACE_SETREGS
-#define UM_HAVE_SETREGS
-#endif
-
-#ifdef PTRACE_GETFPREGS
-#define UM_HAVE_GETFPREGS
-#endif
-
-#ifdef PTRACE_SETFPREGS
-#define UM_HAVE_SETFPREGS
-#endif
-
-#ifdef PTRACE_GETFPXREGS
-#define UM_HAVE_GETFPXREGS
-#endif
-
-#ifdef PTRACE_SETFPXREGS
-#define UM_HAVE_SETFPXREGS
-#endif
#endif
diff --git a/arch/um/include/sysdep-i386/sigcontext.h b/arch/um/include/sysdep-i386/sigcontext.h
index 67e77122aa45..f583c87111a0 100644
--- a/arch/um/include/sysdep-i386/sigcontext.h
+++ b/arch/um/include/sysdep-i386/sigcontext.h
@@ -10,7 +10,7 @@
#define IP_RESTART_SYSCALL(ip) ((ip) -= 2)
-#define GET_FAULTINFO_FROM_SC(fi,sc) \
+#define GET_FAULTINFO_FROM_SC(fi, sc) \
{ \
(fi).cr2 = SC_CR2(sc); \
(fi).error_code = SC_ERR(sc); \
diff --git a/arch/um/include/sysdep-x86_64/ptrace_user.h b/arch/um/include/sysdep-x86_64/ptrace_user.h
index 45c0bd881cb3..4dbccdb58f48 100644
--- a/arch/um/include/sysdep-x86_64/ptrace_user.h
+++ b/arch/um/include/sysdep-x86_64/ptrace_user.h
@@ -48,7 +48,8 @@
#define PT_ORIG_RAX_OFFSET (ORIG_RAX)
#define PT_ORIG_RAX(regs) ((regs)[PT_INDEX(ORIG_RAX)])
-/* x86_64 FC3 doesn't define this in /usr/include/linux/ptrace.h even though
+/*
+ * x86_64 FC3 doesn't define this in /usr/include/linux/ptrace.h even though
* it's defined in the kernel's include/linux/ptrace.h. Additionally, use the
* 2.4 name and value for 2.4 host compatibility.
*/
@@ -56,7 +57,8 @@
#define PTRACE_OLDSETOPTIONS 21
#endif
-/* These are before the system call, so the system call number is RAX
+/*
+ * These are before the system call, so the system call number is RAX
* rather than ORIG_RAX, and arg4 is R10 rather than RCX
*/
#define REGS_SYSCALL_NR PT_INDEX(RAX)
@@ -73,14 +75,3 @@
#define FP_SIZE (HOST_FP_SIZE)
#endif
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/include/um_malloc.h b/arch/um/include/um_malloc.h
index 0ad17cb83d96..c554d706d106 100644
--- a/arch/um/include/um_malloc.h
+++ b/arch/um/include/um_malloc.h
@@ -8,15 +8,12 @@
#include "kern_constants.h"
-extern void *__kmalloc(int size, int flags);
-static inline void *kmalloc(int size, int flags)
-{
- return __kmalloc(size, flags);
-}
-
+extern void *uml_kmalloc(int size, int flags);
extern void kfree(const void *ptr);
extern void *vmalloc(unsigned long size);
extern void vfree(void *ptr);
#endif /* __UM_MALLOC_H__ */
+
+
diff --git a/arch/um/kernel/dyn.lds.S b/arch/um/kernel/dyn.lds.S
index 26090b7f323e..9975e1ab44fb 100644
--- a/arch/um/kernel/dyn.lds.S
+++ b/arch/um/kernel/dyn.lds.S
@@ -1,4 +1,5 @@
#include <asm-generic/vmlinux.lds.h>
+#include <asm/page.h>
OUTPUT_FORMAT(ELF_FORMAT)
OUTPUT_ARCH(ELF_ARCH)
@@ -21,7 +22,7 @@ SECTIONS
_einittext = .;
}
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
/* Read-only sections, merged into text segment: */
.hash : { *(.hash) }
@@ -68,9 +69,9 @@ SECTIONS
/* .gnu.warning sections are handled specially by elf32.em. */
*(.gnu.warning)
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
} =0x90909090
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
.syscall_stub : {
__syscall_stub_start = .;
*(.__syscall_stub*)
diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c
index 2eea1ff235e6..b0ee64622ff7 100644
--- a/arch/um/kernel/mem.c
+++ b/arch/um/kernel/mem.c
@@ -375,3 +375,8 @@ pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
return pmd;
}
#endif
+
+void *uml_kmalloc(int size, int flags)
+{
+ return kmalloc(size, flags);
+}
diff --git a/arch/um/kernel/time.c b/arch/um/kernel/time.c
index 0d0cea2ac98d..c3e2f369c33c 100644
--- a/arch/um/kernel/time.c
+++ b/arch/um/kernel/time.c
@@ -75,7 +75,7 @@ static irqreturn_t um_timer(int irq, void *dev)
static cycle_t itimer_read(void)
{
- return os_nsecs();
+ return os_nsecs() / 1000;
}
static struct clocksource itimer_clocksource = {
@@ -83,7 +83,7 @@ static struct clocksource itimer_clocksource = {
.rating = 300,
.read = itimer_read,
.mask = CLOCKSOURCE_MASK(64),
- .mult = 1,
+ .mult = 1000,
.shift = 0,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c
index 56deed623446..9db85b2ce698 100644
--- a/arch/um/kernel/um_arch.c
+++ b/arch/um/kernel/um_arch.c
@@ -150,7 +150,7 @@ __uml_setup("root=", uml_root_setup,
static int __init no_skas_debug_setup(char *line, int *add)
{
printf("'debug' is not necessary to gdb UML in skas mode - run \n");
- printf("'gdb linux'");
+ printf("'gdb linux'\n");
return 0;
}
@@ -258,6 +258,7 @@ int __init linux_main(int argc, char **argv)
{
unsigned long avail, diff;
unsigned long virtmem_size, max_physmem;
+ unsigned long stack;
unsigned int i;
int add;
char * mode;
@@ -348,7 +349,9 @@ int __init linux_main(int argc, char **argv)
}
virtmem_size = physmem_size;
- avail = TASK_SIZE - start_vm;
+ stack = (unsigned long) argv;
+ stack &= ~(1024 * 1024 - 1);
+ avail = stack - start_vm;
if (physmem_size > avail)
virtmem_size = avail;
end_vm = start_vm + virtmem_size;
diff --git a/arch/um/kernel/uml.lds.S b/arch/um/kernel/uml.lds.S
index 5828c1d54505..11b835248b86 100644
--- a/arch/um/kernel/uml.lds.S
+++ b/arch/um/kernel/uml.lds.S
@@ -1,4 +1,5 @@
#include <asm-generic/vmlinux.lds.h>
+#include <asm/page.h>
OUTPUT_FORMAT(ELF_FORMAT)
OUTPUT_ARCH(ELF_ARCH)
@@ -26,7 +27,7 @@ SECTIONS
INIT_TEXT
_einittext = .;
}
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
.text :
{
@@ -39,7 +40,7 @@ SECTIONS
*(.gnu.linkonce.t*)
}
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
.syscall_stub : {
__syscall_stub_start = .;
*(.__syscall_stub*)
@@ -79,7 +80,7 @@ SECTIONS
.sdata : { *(.sdata) }
_edata = .;
PROVIDE (edata = .);
- . = ALIGN(0x1000);
+ . = ALIGN(PAGE_SIZE);
.sbss :
{
__bss_start = .;
diff --git a/arch/um/os-Linux/drivers/ethertap_user.c b/arch/um/os-Linux/drivers/ethertap_user.c
index 6fb0b174f538..cc72cb2c1af6 100644
--- a/arch/um/os-Linux/drivers/ethertap_user.c
+++ b/arch/um/os-Linux/drivers/ethertap_user.c
@@ -52,7 +52,7 @@ static void etap_change(int op, unsigned char *addr, unsigned char *netmask,
return;
}
- output = kmalloc(UM_KERN_PAGE_SIZE, UM_GFP_KERNEL);
+ output = uml_kmalloc(UM_KERN_PAGE_SIZE, UM_GFP_KERNEL);
if (output == NULL)
printk(UM_KERN_ERR "etap_change : Failed to allocate output "
"buffer\n");
@@ -165,7 +165,7 @@ static int etap_open(void *data)
err = etap_tramp(pri->dev_name, pri->gate_addr, control_fds[0],
control_fds[1], data_fds[0], data_fds[1]);
output_len = UM_KERN_PAGE_SIZE;
- output = kmalloc(output_len, UM_GFP_KERNEL);
+ output = uml_kmalloc(output_len, UM_GFP_KERNEL);
read_output(control_fds[0], output, output_len);
if (output == NULL)
diff --git a/arch/um/os-Linux/helper.c b/arch/um/os-Linux/helper.c
index f25c29a12d00..74ca7aabf4e1 100644
--- a/arch/um/os-Linux/helper.c
+++ b/arch/um/os-Linux/helper.c
@@ -71,8 +71,8 @@ int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv)
data.pre_data = pre_data;
data.argv = argv;
data.fd = fds[1];
- data.buf = __cant_sleep() ? kmalloc(PATH_MAX, UM_GFP_ATOMIC) :
- kmalloc(PATH_MAX, UM_GFP_KERNEL);
+ data.buf = __cant_sleep() ? uml_kmalloc(PATH_MAX, UM_GFP_ATOMIC) :
+ uml_kmalloc(PATH_MAX, UM_GFP_KERNEL);
pid = clone(helper_child, (void *) sp, CLONE_VM, &data);
if (pid < 0) {
ret = -errno;
diff --git a/arch/um/os-Linux/main.c b/arch/um/os-Linux/main.c
index abb9b0ffd960..eee69b9f52c9 100644
--- a/arch/um/os-Linux/main.c
+++ b/arch/um/os-Linux/main.c
@@ -199,7 +199,7 @@ void *__wrap_malloc(int size)
return __real_malloc(size);
else if (size <= UM_KERN_PAGE_SIZE)
/* finding contiguous pages can be hard*/
- ret = kmalloc(size, UM_GFP_KERNEL);
+ ret = uml_kmalloc(size, UM_GFP_KERNEL);
else ret = vmalloc(size);
/*
diff --git a/arch/um/os-Linux/sigio.c b/arch/um/os-Linux/sigio.c
index abf47a7c4abd..eb8f2e4be192 100644
--- a/arch/um/os-Linux/sigio.c
+++ b/arch/um/os-Linux/sigio.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Copyright (C) 2002 - 2008 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
@@ -15,6 +15,7 @@
#include "kern_util.h"
#include "init.h"
#include "os.h"
+#include "process.h"
#include "sigio.h"
#include "um_malloc.h"
#include "user.h"
@@ -109,7 +110,7 @@ static int need_poll(struct pollfds *polls, int n)
if (n <= polls->size)
return 0;
- new = kmalloc(n * sizeof(struct pollfd), UM_GFP_ATOMIC);
+ new = uml_kmalloc(n * sizeof(struct pollfd), UM_GFP_ATOMIC);
if (new == NULL) {
printk(UM_KERN_ERR "need_poll : failed to allocate new "
"pollfds\n");
@@ -243,7 +244,7 @@ static struct pollfd *setup_initial_poll(int fd)
{
struct pollfd *p;
- p = kmalloc(sizeof(struct pollfd), UM_GFP_KERNEL);
+ p = uml_kmalloc(sizeof(struct pollfd), UM_GFP_KERNEL);
if (p == NULL) {
printk(UM_KERN_ERR "setup_initial_poll : failed to allocate "
"poll\n");
@@ -338,20 +339,10 @@ out_close1:
close(l_write_sigio_fds[1]);
}
-/* Changed during early boot */
-static int pty_output_sigio = 0;
-static int pty_close_sigio = 0;
-
-void maybe_sigio_broken(int fd, int read)
+void sigio_broken(int fd, int read)
{
int err;
- if (!isatty(fd))
- return;
-
- if ((read || pty_output_sigio) && (!read || pty_close_sigio))
- return;
-
write_sigio_workaround();
sigio_lock();
@@ -370,6 +361,21 @@ out:
sigio_unlock();
}
+/* Changed during early boot */
+static int pty_output_sigio;
+static int pty_close_sigio;
+
+void maybe_sigio_broken(int fd, int read)
+{
+ if (!isatty(fd))
+ return;
+
+ if ((read || pty_output_sigio) && (!read || pty_close_sigio))
+ return;
+
+ sigio_broken(fd, read);
+}
+
static void sigio_cleanup(void)
{
if (write_sigio_pid == -1)
@@ -383,7 +389,7 @@ static void sigio_cleanup(void)
__uml_exitcall(sigio_cleanup);
/* Used as a flag during SIGIO testing early in boot */
-static volatile int got_sigio = 0;
+static int got_sigio;
static void __init handler(int sig)
{
@@ -498,7 +504,8 @@ static void tty_output(int master, int slave)
if (errno != EAGAIN)
printk(UM_KERN_ERR "tty_output : write failed, errno = %d\n",
errno);
- while (((n = read(slave, buf, sizeof(buf))) > 0) && !got_sigio)
+ while (((n = read(slave, buf, sizeof(buf))) > 0) &&
+ !({ barrier(); got_sigio; }))
;
if (got_sigio) {
diff --git a/arch/um/os-Linux/signal.c b/arch/um/os-Linux/signal.c
index 3f1694b134cb..5aade6027e40 100644
--- a/arch/um/os-Linux/signal.c
+++ b/arch/um/os-Linux/signal.c
@@ -12,6 +12,7 @@
#include "as-layout.h"
#include "kern_util.h"
#include "os.h"
+#include "process.h"
#include "sysdep/barrier.h"
#include "sysdep/sigcontext.h"
#include "user.h"
diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c
index 1e8cba6550a9..6be028ca1817 100644
--- a/arch/um/os-Linux/skas/process.c
+++ b/arch/um/os-Linux/skas/process.c
@@ -442,7 +442,7 @@ void userspace(struct uml_pt_regs *regs)
unblock_signals();
break;
default:
- printk(UM_KERN_ERR "userspace - child stopped "
+ printk(UM_KERN_ERR "userspace - child stopped "
"with signal %d\n", sig);
fatal_sigsegv();
}
diff --git a/arch/um/os-Linux/start_up.c b/arch/um/os-Linux/start_up.c
index 997d01944f91..b4b36e0f2e89 100644
--- a/arch/um/os-Linux/start_up.c
+++ b/arch/um/os-Linux/start_up.c
@@ -23,6 +23,7 @@
#include "mem_user.h"
#include "ptrace_user.h"
#include "registers.h"
+#include "skas.h"
#include "skas_ptrace.h"
static void ptrace_child(void)
@@ -140,14 +141,27 @@ static int stop_ptraced_child(int pid, int exitcode, int mustexit)
}
/* Changed only during early boot */
-int ptrace_faultinfo = 1;
-int ptrace_ldt = 1;
-int proc_mm = 1;
-int skas_needs_stub = 0;
+int ptrace_faultinfo;
+static int disable_ptrace_faultinfo;
+
+int ptrace_ldt;
+static int disable_ptrace_ldt;
+
+int proc_mm;
+static int disable_proc_mm;
+
+int have_switch_mm;
+static int disable_switch_mm;
+
+int skas_needs_stub;
static int __init skas0_cmd_param(char *str, int* add)
{
- ptrace_faultinfo = proc_mm = 0;
+ disable_ptrace_faultinfo = 1;
+ disable_ptrace_ldt = 1;
+ disable_proc_mm = 1;
+ disable_switch_mm = 1;
+
return 0;
}
@@ -157,15 +171,12 @@ static int __init mode_skas0_cmd_param(char *str, int* add)
__attribute__((alias("skas0_cmd_param")));
__uml_setup("skas0", skas0_cmd_param,
- "skas0\n"
- " Disables SKAS3 usage, so that SKAS0 is used, unless \n"
- " you specify mode=tt.\n\n");
+"skas0\n"
+" Disables SKAS3 and SKAS4 usage, so that SKAS0 is used\n\n");
__uml_setup("mode=skas0", mode_skas0_cmd_param,
- "mode=skas0\n"
- " Disables SKAS3 usage, so that SKAS0 is used, unless you \n"
- " specify mode=tt. Note that this was recently added - on \n"
- " older kernels you must use simply \"skas0\".\n\n");
+"mode=skas0\n"
+" Disables SKAS3 and SKAS4 usage, so that SKAS0 is used.\n\n");
/* Changed only during early boot */
static int force_sysemu_disabled = 0;
@@ -360,7 +371,7 @@ void __init os_early_checks(void)
static int __init noprocmm_cmd_param(char *str, int* add)
{
- proc_mm = 0;
+ disable_proc_mm = 1;
return 0;
}
@@ -372,7 +383,7 @@ __uml_setup("noprocmm", noprocmm_cmd_param,
static int __init noptracefaultinfo_cmd_param(char *str, int* add)
{
- ptrace_faultinfo = 0;
+ disable_ptrace_faultinfo = 1;
return 0;
}
@@ -384,7 +395,7 @@ __uml_setup("noptracefaultinfo", noptracefaultinfo_cmd_param,
static int __init noptraceldt_cmd_param(char *str, int* add)
{
- ptrace_ldt = 0;
+ disable_ptrace_ldt = 1;
return 0;
}
@@ -404,17 +415,15 @@ static inline void check_skas3_ptrace_faultinfo(void)
n = ptrace(PTRACE_FAULTINFO, pid, 0, &fi);
if (n < 0) {
- ptrace_faultinfo = 0;
if (errno == EIO)
non_fatal("not found\n");
else
perror("not found");
- }
+ } else if (disable_ptrace_faultinfo)
+ non_fatal("found but disabled on command line\n");
else {
- if (!ptrace_faultinfo)
- non_fatal("found but disabled on command line\n");
- else
- non_fatal("found\n");
+ ptrace_faultinfo = 1;
+ non_fatal("found\n");
}
stop_ptraced_child(pid, 1, 1);
@@ -437,38 +446,30 @@ static inline void check_skas3_ptrace_ldt(void)
if (n < 0) {
if (errno == EIO)
non_fatal("not found\n");
- else {
+ else
perror("not found");
- }
- ptrace_ldt = 0;
- }
+ } else if (disable_ptrace_ldt)
+ non_fatal("found, but use is disabled\n");
else {
- if (ptrace_ldt)
- non_fatal("found\n");
- else
- non_fatal("found, but use is disabled\n");
+ ptrace_ldt = 1;
+ non_fatal("found\n");
}
stop_ptraced_child(pid, 1, 1);
-#else
- /* PTRACE_LDT might be disabled via cmdline option.
- * We want to override this, else we might use the stub
- * without real need
- */
- ptrace_ldt = 1;
#endif
}
static inline void check_skas3_proc_mm(void)
{
non_fatal(" - /proc/mm...");
- if (access("/proc/mm", W_OK) < 0) {
- proc_mm = 0;
+ if (access("/proc/mm", W_OK) < 0)
perror("not found");
- }
- else if (!proc_mm)
+ else if (disable_proc_mm)
non_fatal("found but disabled on command line\n");
- else non_fatal("found\n");
+ else {
+ proc_mm = 1;
+ non_fatal("found\n");
+ }
}
void can_do_skas(void)
diff --git a/arch/um/os-Linux/sys-i386/registers.c b/arch/um/os-Linux/sys-i386/registers.c
index b613473b3ec1..c6183e7aec3d 100644
--- a/arch/um/os-Linux/sys-i386/registers.c
+++ b/arch/um/os-Linux/sys-i386/registers.c
@@ -5,6 +5,7 @@
*/
#include <errno.h>
+#include <asm/user.h>
#include "kern_constants.h"
#include "longjmp.h"
#include "user.h"
@@ -74,10 +75,10 @@ int put_fp_registers(int pid, unsigned long *regs)
void arch_init_registers(int pid)
{
- unsigned long fpx_regs[HOST_XFP_SIZE];
+ struct user_fxsr_struct fpx_regs;
int err;
- err = ptrace(PTRACE_GETFPXREGS, pid, 0, fpx_regs);
+ err = ptrace(PTRACE_GETFPXREGS, pid, 0, &fpx_regs);
if (!err)
return;
diff --git a/arch/um/os-Linux/time.c b/arch/um/os-Linux/time.c
index e49280599465..bee98f466d66 100644
--- a/arch/um/os-Linux/time.c
+++ b/arch/um/os-Linux/time.c
@@ -9,7 +9,9 @@
#include <time.h>
#include <sys/time.h>
#include "kern_constants.h"
+#include "kern_util.h"
#include "os.h"
+#include "process.h"
#include "user.h"
int set_interval(void)
@@ -58,12 +60,17 @@ static inline long long timeval_to_ns(const struct timeval *tv)
long long disable_timer(void)
{
struct itimerval time = ((struct itimerval) { { 0, 0 }, { 0, 0 } });
+ int remain, max = UM_NSEC_PER_SEC / UM_HZ;
if (setitimer(ITIMER_VIRTUAL, &time, &time) < 0)
printk(UM_KERN_ERR "disable_timer - setitimer failed, "
"errno = %d\n", errno);
- return timeval_to_ns(&time.it_value);
+ remain = timeval_to_ns(&time.it_value);
+ if (remain > max)
+ remain = max;
+
+ return remain;
}
long long os_nsecs(void)
@@ -79,7 +86,44 @@ static int after_sleep_interval(struct timespec *ts)
{
return 0;
}
+
+static void deliver_alarm(void)
+{
+ alarm_handler(SIGVTALRM, NULL);
+}
+
+static unsigned long long sleep_time(unsigned long long nsecs)
+{
+ return nsecs;
+}
+
#else
+unsigned long long last_tick;
+unsigned long long skew;
+
+static void deliver_alarm(void)
+{
+ unsigned long long this_tick = os_nsecs();
+ int one_tick = UM_NSEC_PER_SEC / UM_HZ;
+
+ if (last_tick == 0)
+ last_tick = this_tick - one_tick;
+
+ skew += this_tick - last_tick;
+
+ while (skew >= one_tick) {
+ alarm_handler(SIGVTALRM, NULL);
+ skew -= one_tick;
+ }
+
+ last_tick = this_tick;
+}
+
+static unsigned long long sleep_time(unsigned long long nsecs)
+{
+ return nsecs > skew ? nsecs - skew : 0;
+}
+
static inline long long timespec_to_us(const struct timespec *ts)
{
return ((long long) ts->tv_sec * UM_USEC_PER_SEC) +
@@ -102,6 +146,8 @@ static int after_sleep_interval(struct timespec *ts)
*/
if (start_usecs > usec)
start_usecs = usec;
+
+ start_usecs -= skew / UM_NSEC_PER_USEC;
tv = ((struct timeval) { .tv_sec = start_usecs / UM_USEC_PER_SEC,
.tv_usec = start_usecs % UM_USEC_PER_SEC });
interval = ((struct itimerval) { { 0, usec }, tv });
@@ -113,8 +159,6 @@ static int after_sleep_interval(struct timespec *ts)
}
#endif
-extern void alarm_handler(int sig, struct sigcontext *sc);
-
void idle_sleep(unsigned long long nsecs)
{
struct timespec ts;
@@ -126,10 +170,12 @@ void idle_sleep(unsigned long long nsecs)
*/
if (nsecs == 0)
nsecs = UM_NSEC_PER_SEC / UM_HZ;
+
+ nsecs = sleep_time(nsecs);
ts = ((struct timespec) { .tv_sec = nsecs / UM_NSEC_PER_SEC,
.tv_nsec = nsecs % UM_NSEC_PER_SEC });
if (nanosleep(&ts, &ts) == 0)
- alarm_handler(SIGVTALRM, NULL);
+ deliver_alarm();
after_sleep_interval(&ts);
}
diff --git a/arch/um/sys-i386/ptrace.c b/arch/um/sys-i386/ptrace.c
index 6b4499906a6c..c9b176534d65 100644
--- a/arch/um/sys-i386/ptrace.c
+++ b/arch/um/sys-i386/ptrace.c
@@ -148,14 +148,13 @@ int peek_user(struct task_struct *child, long addr, long data)
int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
{
int err, n, cpu = ((struct thread_info *) child->stack)->cpu;
- long fpregs[HOST_FP_SIZE];
+ struct user_i387_struct fpregs;
- BUG_ON(sizeof(*buf) != sizeof(fpregs));
- err = save_fp_registers(userspace_pid[cpu], fpregs);
+ err = save_fp_registers(userspace_pid[cpu], (unsigned long *) &fpregs);
if (err)
return err;
- n = copy_to_user(buf, fpregs, sizeof(fpregs));
+ n = copy_to_user(buf, &fpregs, sizeof(fpregs));
if(n > 0)
return -EFAULT;
@@ -165,27 +164,26 @@ int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
{
int n, cpu = ((struct thread_info *) child->stack)->cpu;
- long fpregs[HOST_FP_SIZE];
+ struct user_i387_struct fpregs;
- BUG_ON(sizeof(*buf) != sizeof(fpregs));
- n = copy_from_user(fpregs, buf, sizeof(fpregs));
+ n = copy_from_user(&fpregs, buf, sizeof(fpregs));
if (n > 0)
return -EFAULT;
- return restore_fp_registers(userspace_pid[cpu], fpregs);
+ return restore_fp_registers(userspace_pid[cpu],
+ (unsigned long *) &fpregs);
}
int get_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
{
int err, n, cpu = ((struct thread_info *) child->stack)->cpu;
- long fpregs[HOST_XFP_SIZE];
+ struct user_fxsr_struct fpregs;
- BUG_ON(sizeof(*buf) != sizeof(fpregs));
- err = save_fpx_registers(userspace_pid[cpu], fpregs);
+ err = save_fpx_registers(userspace_pid[cpu], (unsigned long *) &fpregs);
if (err)
return err;
- n = copy_to_user(buf, fpregs, sizeof(fpregs));
+ n = copy_to_user(buf, &fpregs, sizeof(fpregs));
if(n > 0)
return -EFAULT;
@@ -195,14 +193,14 @@ int get_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
int set_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
{
int n, cpu = ((struct thread_info *) child->stack)->cpu;
- long fpregs[HOST_XFP_SIZE];
+ struct user_fxsr_struct fpregs;
- BUG_ON(sizeof(*buf) != sizeof(fpregs));
- n = copy_from_user(fpregs, buf, sizeof(fpregs));
+ n = copy_from_user(&fpregs, buf, sizeof(fpregs));
if (n > 0)
return -EFAULT;
- return restore_fpx_registers(userspace_pid[cpu], fpregs);
+ return restore_fpx_registers(userspace_pid[cpu],
+ (unsigned long *) &fpregs);
}
long subarch_ptrace(struct task_struct *child, long request, long addr,
diff --git a/arch/um/sys-i386/user-offsets.c b/arch/um/sys-i386/user-offsets.c
index 39bd32bf84f0..5f883bfe773f 100644
--- a/arch/um/sys-i386/user-offsets.c
+++ b/arch/um/sys-i386/user-offsets.c
@@ -22,7 +22,7 @@ void foo(void)
OFFSET(HOST_SC_CR2, sigcontext, cr2);
DEFINE_LONGS(HOST_FP_SIZE, sizeof(struct user_fpregs_struct));
- DEFINE_LONGS(HOST_XFP_SIZE, sizeof(struct user_fpxregs_struct));
+ DEFINE_LONGS(HOST_FPX_SIZE, sizeof(struct user_fpxregs_struct));
DEFINE(HOST_IP, EIP);
DEFINE(HOST_SP, UESP);
diff --git a/arch/um/sys-x86_64/user-offsets.c b/arch/um/sys-x86_64/user-offsets.c
index 2f3443c6e859..973585414a66 100644
--- a/arch/um/sys-x86_64/user-offsets.c
+++ b/arch/um/sys-x86_64/user-offsets.c
@@ -24,7 +24,6 @@ void foo(void)
OFFSET(HOST_SC_TRAPNO, sigcontext, trapno);
DEFINE(HOST_FP_SIZE, sizeof(struct _fpstate) / sizeof(unsigned long));
- DEFINE(HOST_XFP_SIZE, 0);
DEFINE_LONGS(HOST_RBX, RBX);
DEFINE_LONGS(HOST_RCX, RCX);
DEFINE_LONGS(HOST_RDI, RDI);
diff --git a/arch/x86/kernel/acpi/realmode/wakeup.lds.S b/arch/x86/kernel/acpi/realmode/wakeup.lds.S
index 22fab6c4be15..7da00b799cda 100644
--- a/arch/x86/kernel/acpi/realmode/wakeup.lds.S
+++ b/arch/x86/kernel/acpi/realmode/wakeup.lds.S
@@ -12,11 +12,6 @@ ENTRY(_start)
SECTIONS
{
- . = HEADER_OFFSET;
- .header : {
- *(.header)
- }
-
. = 0;
.text : {
*(.text*)
@@ -50,6 +45,11 @@ SECTIONS
__bss_end = .;
}
+ . = HEADER_OFFSET;
+ .header : {
+ *(.header)
+ }
+
. = ALIGN(16);
_end = .;
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index 0c37f16b6950..c5ef1af8e79d 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -385,11 +385,13 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
if (dma_alloc_from_coherent_mem(dev, size, dma_handle, &memory))
return memory;
- if (!dev)
+ if (!dev) {
dev = &fallback_dev;
+ gfp |= GFP_DMA;
+ }
dma_mask = dev->coherent_dma_mask;
if (dma_mask == 0)
- dma_mask = DMA_32BIT_MASK;
+ dma_mask = (gfp & GFP_DMA) ? DMA_24BIT_MASK : DMA_32BIT_MASK;
/* Device not DMA able */
if (dev->dma_mask == NULL)
@@ -403,7 +405,7 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
larger than 16MB and in this case we have a chance of
finding fitting memory in the next higher zone first. If
not retry with true GFP_DMA. -AK */
- if (dma_mask <= DMA_32BIT_MASK)
+ if (dma_mask <= DMA_32BIT_MASK && !(gfp & GFP_DMA))
gfp |= GFP_DMA32;
#endif
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index fb03ef380f0e..a7835f282936 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -1303,6 +1303,9 @@ static const struct user_regset_view user_x86_64_view = {
#define genregs32_get genregs_get
#define genregs32_set genregs_set
+#define user_i387_ia32_struct user_i387_struct
+#define user32_fxsr_struct user_fxsr_struct
+
#endif /* CONFIG_X86_64 */
#if defined CONFIG_X86_32 || defined CONFIG_IA32_EMULATION
@@ -1315,13 +1318,13 @@ static const struct user_regset x86_32_regsets[] = {
},
[REGSET_FP] = {
.core_note_type = NT_PRFPREG,
- .n = sizeof(struct user_i387_struct) / sizeof(u32),
+ .n = sizeof(struct user_i387_ia32_struct) / sizeof(u32),
.size = sizeof(u32), .align = sizeof(u32),
.active = fpregs_active, .get = fpregs_get, .set = fpregs_set
},
[REGSET_XFP] = {
.core_note_type = NT_PRXFPREG,
- .n = sizeof(struct user_i387_struct) / sizeof(u32),
+ .n = sizeof(struct user32_fxsr_struct) / sizeof(u32),
.size = sizeof(u32), .align = sizeof(u32),
.active = xfpregs_active, .get = xfpregs_get, .set = xfpregs_set
},
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index c0c68c18a788..6f80b852a196 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -12,6 +12,7 @@
#include <asm/mpspec.h>
#include <asm/apicdef.h>
+#ifdef CONFIG_X86_LOCAL_APIC
unsigned int num_processors;
unsigned disabled_cpus __cpuinitdata;
/* Processor that is doing the boot up */
@@ -23,8 +24,9 @@ EXPORT_PER_CPU_SYMBOL(x86_cpu_to_apicid);
/* Bitmask of physically existing CPUs */
physid_mask_t phys_cpu_present_map;
+#endif
-#if defined(CONFIG_HAVE_SETUP_PER_CPU_AREA) && defined(CONFIG_SMP)
+#if defined(CONFIG_HAVE_SETUP_PER_CPU_AREA) && defined(CONFIG_X86_SMP)
/*
* Copy data used in early init routines from the initial arrays to the
* per cpu data areas. These arrays then become expendable and the
diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c
index f2fc8feb727d..6dff1286ad8a 100644
--- a/arch/x86/kernel/setup_64.c
+++ b/arch/x86/kernel/setup_64.c
@@ -951,7 +951,7 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c)
static void __cpuinit early_init_centaur(struct cpuinfo_x86 *c)
{
if (c->x86 == 0x6 && c->x86_model >= 0xf)
- set_bit(X86_FEATURE_CONSTANT_TSC, &c->x86_capability);
+ set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
}
static void __cpuinit init_centaur(struct cpuinfo_x86 *c)
diff --git a/arch/x86/kernel/smp.c b/arch/x86/kernel/smp.c
index 8f75893a6467..0cb7aadc87cd 100644
--- a/arch/x86/kernel/smp.c
+++ b/arch/x86/kernel/smp.c
@@ -231,7 +231,8 @@ native_smp_call_function_mask(cpumask_t mask,
wmb();
/* Send a message to other CPUs */
- if (cpus_equal(mask, allbutself))
+ if (cpus_equal(mask, allbutself) &&
+ cpus_equal(cpu_online_map, cpu_callout_map))
send_IPI_allbutself(CALL_FUNCTION_VECTOR);
else
send_IPI_mask(mask, CALL_FUNCTION_VECTOR);
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 6b087ab6cd8f..38988491c622 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -86,6 +86,7 @@ void *x86_bios_cpu_apicid_early_ptr;
#ifdef CONFIG_X86_32
u8 apicid_2_node[MAX_APICID];
+static int low_mappings;
#endif
/* State of each CPU */
@@ -326,6 +327,12 @@ static void __cpuinit start_secondary(void *unused)
enable_8259A_irq(0);
}
+#ifdef CONFIG_X86_32
+ while (low_mappings)
+ cpu_relax();
+ __flush_tlb_all();
+#endif
+
/* This must be done before setting cpu_online_map */
set_cpu_sibling_map(raw_smp_processor_id());
wmb();
@@ -1040,14 +1047,20 @@ int __cpuinit native_cpu_up(unsigned int cpu)
#ifdef CONFIG_X86_32
/* init low mem mapping */
clone_pgd_range(swapper_pg_dir, swapper_pg_dir + KERNEL_PGD_BOUNDARY,
- min_t(unsigned long, KERNEL_PGD_PTRS, KERNEL_PGD_BOUNDARY));
+ min_t(unsigned long, KERNEL_PGD_PTRS, KERNEL_PGD_BOUNDARY));
flush_tlb_all();
-#endif
+ low_mappings = 1;
err = do_boot_cpu(apicid, cpu);
- if (err < 0) {
+
+ zap_low_mappings();
+ low_mappings = 0;
+#else
+ err = do_boot_cpu(apicid, cpu);
+#endif
+ if (err) {
Dprintk("do_boot_cpu failed %d\n", err);
- return err;
+ return -EIO;
}
/*
@@ -1259,9 +1272,6 @@ void __init native_smp_cpus_done(unsigned int max_cpus)
setup_ioapic_dest();
#endif
check_nmi_watchdog();
-#ifdef CONFIG_X86_32
- zap_low_mappings();
-#endif
}
#ifdef CONFIG_HOTPLUG_CPU
diff --git a/arch/x86/kernel/x8664_ksyms_64.c b/arch/x86/kernel/x8664_ksyms_64.c
index 58882f9f2637..f6c05d0410fb 100644
--- a/arch/x86/kernel/x8664_ksyms_64.c
+++ b/arch/x86/kernel/x8664_ksyms_64.c
@@ -2,6 +2,7 @@
All C exports should go in the respective C files. */
#include <linux/module.h>
+#include <net/checksum.h>
#include <linux/smp.h>
#include <asm/processor.h>
@@ -29,6 +30,8 @@ EXPORT_SYMBOL(__copy_from_user_inatomic);
EXPORT_SYMBOL(copy_page);
EXPORT_SYMBOL(clear_page);
+EXPORT_SYMBOL(csum_partial);
+
/*
* Export string functions. We normally rely on gcc builtin for most of these,
* but gcc sometimes decides not to inline them.
diff --git a/arch/x86/lib/csum-partial_64.c b/arch/x86/lib/csum-partial_64.c
index bc503f506903..bf51144d97e1 100644
--- a/arch/x86/lib/csum-partial_64.c
+++ b/arch/x86/lib/csum-partial_64.c
@@ -136,8 +136,6 @@ __wsum csum_partial(const void *buff, int len, __wsum sum)
(__force u32)sum);
}
-EXPORT_SYMBOL(csum_partial);
-
/*
* this routine is used for miscellaneous IP-like checksums, mainly
* in icmp.c
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index de236e419cb5..ec30d10154b6 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -438,8 +438,6 @@ void zap_low_mappings(void)
{
int i;
- save_pg_dir();
-
/*
* Zap initial low-memory mappings.
*
@@ -663,16 +661,8 @@ void __init mem_init(void)
test_wp_bit();
cpa_init();
-
- /*
- * Subtle. SMP is doing it's boot stuff late (because it has to
- * fork idle threads) - but it also needs low mappings for the
- * protected-mode entry to work. We zap these entries only after
- * the WP-bit has been tested.
- */
-#ifndef CONFIG_SMP
+ save_pg_dir();
zap_low_mappings();
-#endif
}
#ifdef CONFIG_MEMORY_HOTPLUG
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index 1a82f4db8a46..c0d5680d5f3c 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -568,7 +568,7 @@ int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
"%s:%d /dev/mem ioremap_change_attr failed %s for %Lx-%Lx\n",
current->comm, current->pid,
cattr_name(flags),
- offset, offset + size);
+ offset, (unsigned long long)(offset + size));
return 0;
}
@@ -589,7 +589,7 @@ void map_devmem(unsigned long pfn, unsigned long size, pgprot_t vma_prot)
"%s:%d /dev/mem expected mapping type %s for %Lx-%Lx, got %s\n",
current->comm, current->pid,
cattr_name(want_flags),
- addr, addr + size,
+ addr, (unsigned long long)(addr + size),
cattr_name(flags));
}
}
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index 8af0f0bae2af..10fb308fded8 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -301,15 +301,13 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
prot = pgprot_val(vma->vm_page_prot);
if (pat_wc_enabled && write_combine)
prot |= _PAGE_CACHE_WC;
- else if (pat_wc_enabled)
+ else if (pat_wc_enabled || boot_cpu_data.x86 > 3)
/*
* ioremap() and ioremap_nocache() defaults to UC MINUS for now.
* To avoid attribute conflicts, request UC MINUS here
* aswell.
*/
prot |= _PAGE_CACHE_UC_MINUS;
- else if (boot_cpu_data.x86 > 3)
- prot |= _PAGE_CACHE_UC;
vma->vm_page_prot = __pgprot(prot);