summaryrefslogtreecommitdiff
path: root/drivers/ata
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2009-12-19 11:04:29 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2009-12-19 11:04:29 -0800
commit70e66a5079b2b33f142303d31581cf03f7af98fe (patch)
tree3160fb22716de0407d87ec9de6135127ed7c1fed /drivers/ata
parenteca9dfcd0029c8a84b1094bb84a2fb53e4addf6c (diff)
parent0535f2bc170bc0779ac471faff39f633ca19ab59 (diff)
Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: sata_mv: remove pointless NULL test pata_hpt3x2n: fix clock turnaround libata: fix reporting of drained bytes when clearing DRQ sata_mv: add power management support for the PCI controllers. sata_mv: store the board_idx into the host private data pata_octeon_cf: use resource_size(), to fix resource sizing bug libata: use the WRITE_SAME_16 define sata_mv: move the PCI bar description initialization code sata_mv: add power management support for the platform driver sata_mv: support clkdev framework sata_mv: increase PIO IORDY timeout Fixed crazy mode-change in merge.
Diffstat (limited to 'drivers/ata')
-rw-r--r--drivers/ata/libata-scsi.c2
-rw-r--r--drivers/ata/libata-sff.c2
-rw-r--r--drivers/ata/pata_hpt3x2n.c64
-rw-r--r--drivers/ata/pata_octeon_cf.c2
-rw-r--r--drivers/ata/sata_mv.c144
5 files changed, 163 insertions, 51 deletions
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 1683ebda900b..f4ea5a8c325b 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3022,7 +3022,7 @@ static inline ata_xlat_func_t ata_get_xlat_func(struct ata_device *dev, u8 cmd)
case WRITE_16:
return ata_scsi_rw_xlat;
- case 0x93 /*WRITE_SAME_16*/:
+ case WRITE_SAME_16:
return ata_scsi_write_same_xlat;
case SYNCHRONIZE_CACHE:
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index efa8773bef5a..741065c9da67 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -2275,7 +2275,7 @@ void ata_sff_drain_fifo(struct ata_queued_cmd *qc)
ap = qc->ap;
/* Drain up to 64K of data before we give up this recovery method */
for (count = 0; (ap->ops->sff_check_status(ap) & ATA_DRQ)
- && count < 32768; count++)
+ && count < 65536; count += 2)
ioread16(ap->ioaddr.data_addr);
/* Can become DEBUG later */
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index 9a09a1b11ca5..dd26bc73bd9a 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -8,7 +8,7 @@
* Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org>
* Portions Copyright (C) 2001 Sun Microsystems, Inc.
* Portions Copyright (C) 2003 Red Hat Inc
- * Portions Copyright (C) 2005-2007 MontaVista Software, Inc.
+ * Portions Copyright (C) 2005-2009 MontaVista Software, Inc.
*
*
* TODO
@@ -25,7 +25,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_hpt3x2n"
-#define DRV_VERSION "0.3.7"
+#define DRV_VERSION "0.3.8"
enum {
HPT_PCI_FAST = (1 << 31),
@@ -264,7 +264,7 @@ static void hpt3x2n_bmdma_stop(struct ata_queued_cmd *qc)
static void hpt3x2n_set_clock(struct ata_port *ap, int source)
{
- void __iomem *bmdma = ap->ioaddr.bmdma_addr;
+ void __iomem *bmdma = ap->ioaddr.bmdma_addr - ap->port_no * 8;
/* Tristate the bus */
iowrite8(0x80, bmdma+0x73);
@@ -274,9 +274,9 @@ static void hpt3x2n_set_clock(struct ata_port *ap, int source)
iowrite8(source, bmdma+0x7B);
iowrite8(0xC0, bmdma+0x79);
- /* Reset state machines */
- iowrite8(0x37, bmdma+0x70);
- iowrite8(0x37, bmdma+0x74);
+ /* Reset state machines, avoid enabling the disabled channels */
+ iowrite8(ioread8(bmdma+0x70) | 0x32, bmdma+0x70);
+ iowrite8(ioread8(bmdma+0x74) | 0x32, bmdma+0x74);
/* Complete reset */
iowrite8(0x00, bmdma+0x79);
@@ -286,21 +286,10 @@ static void hpt3x2n_set_clock(struct ata_port *ap, int source)
iowrite8(0x00, bmdma+0x77);
}
-/* Check if our partner interface is busy */
-
-static int hpt3x2n_pair_idle(struct ata_port *ap)
-{
- struct ata_host *host = ap->host;
- struct ata_port *pair = host->ports[ap->port_no ^ 1];
-
- if (pair->hsm_task_state == HSM_ST_IDLE)
- return 1;
- return 0;
-}
-
static int hpt3x2n_use_dpll(struct ata_port *ap, int writing)
{
long flags = (long)ap->host->private_data;
+
/* See if we should use the DPLL */
if (writing)
return USE_DPLL; /* Needed for write */
@@ -309,20 +298,35 @@ static int hpt3x2n_use_dpll(struct ata_port *ap, int writing)
return 0;
}
+static int hpt3x2n_qc_defer(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct ata_port *alt = ap->host->ports[ap->port_no ^ 1];
+ int rc, flags = (long)ap->host->private_data;
+ int dpll = hpt3x2n_use_dpll(ap, qc->tf.flags & ATA_TFLAG_WRITE);
+
+ /* First apply the usual rules */
+ rc = ata_std_qc_defer(qc);
+ if (rc != 0)
+ return rc;
+
+ if ((flags & USE_DPLL) != dpll && alt->qc_active)
+ return ATA_DEFER_PORT;
+ return 0;
+}
+
static unsigned int hpt3x2n_qc_issue(struct ata_queued_cmd *qc)
{
- struct ata_taskfile *tf = &qc->tf;
struct ata_port *ap = qc->ap;
int flags = (long)ap->host->private_data;
+ int dpll = hpt3x2n_use_dpll(ap, qc->tf.flags & ATA_TFLAG_WRITE);
- if (hpt3x2n_pair_idle(ap)) {
- int dpll = hpt3x2n_use_dpll(ap, (tf->flags & ATA_TFLAG_WRITE));
- if ((flags & USE_DPLL) != dpll) {
- if (dpll == 1)
- hpt3x2n_set_clock(ap, 0x21);
- else
- hpt3x2n_set_clock(ap, 0x23);
- }
+ if ((flags & USE_DPLL) != dpll) {
+ flags &= ~USE_DPLL;
+ flags |= dpll;
+ ap->host->private_data = (void *)(long)flags;
+
+ hpt3x2n_set_clock(ap, dpll ? 0x21 : 0x23);
}
return ata_sff_qc_issue(qc);
}
@@ -339,6 +343,8 @@ static struct ata_port_operations hpt3x2n_port_ops = {
.inherits = &ata_bmdma_port_ops,
.bmdma_stop = hpt3x2n_bmdma_stop,
+
+ .qc_defer = hpt3x2n_qc_defer,
.qc_issue = hpt3x2n_qc_issue,
.cable_detect = hpt3x2n_cable_detect,
@@ -454,7 +460,7 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
unsigned int f_low, f_high;
int adjust;
unsigned long iobase = pci_resource_start(dev, 4);
- void *hpriv = NULL;
+ void *hpriv = (void *)USE_DPLL;
int rc;
rc = pcim_enable_device(dev);
@@ -539,7 +545,7 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
/* Set our private data up. We only need a few flags so we use
it directly */
if (pci_mhz > 60) {
- hpriv = (void *)PCI66;
+ hpriv = (void *)(PCI66 | USE_DPLL);
/*
* On HPT371N, if ATA clock is 66 MHz we must set bit 2 in
* the MISC. register to stretch the UltraDMA Tss timing.
diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c
index d6f69561dc86..37ef416c1242 100644
--- a/drivers/ata/pata_octeon_cf.c
+++ b/drivers/ata/pata_octeon_cf.c
@@ -853,7 +853,7 @@ static int __devinit octeon_cf_probe(struct platform_device *pdev)
return -EINVAL;
cs1 = devm_ioremap_nocache(&pdev->dev, res_cs1->start,
- res_cs0->end - res_cs1->start + 1);
+ resource_size(res_cs1));
if (!cs1)
return -ENOMEM;
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index a8a7be0d06ff..df8ee325d3ca 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -59,6 +59,7 @@
#include <linux/dmapool.h>
#include <linux/dma-mapping.h>
#include <linux/device.h>
+#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
#include <linux/mbus.h>
@@ -538,6 +539,7 @@ struct mv_port_signal {
struct mv_host_priv {
u32 hp_flags;
+ unsigned int board_idx;
u32 main_irq_mask;
struct mv_port_signal signal[8];
const struct mv_hw_ops *ops;
@@ -548,6 +550,10 @@ struct mv_host_priv {
u32 irq_cause_offset;
u32 irq_mask_offset;
u32 unmask_all_irqs;
+
+#if defined(CONFIG_HAVE_CLK)
+ struct clk *clk;
+#endif
/*
* These consistent DMA memory pools give us guaranteed
* alignment for hardware-accessed data structures,
@@ -2775,7 +2781,7 @@ static void mv_port_intr(struct ata_port *ap, u32 port_cause)
struct mv_port_priv *pp;
int edma_was_enabled;
- if (!ap || (ap->flags & ATA_FLAG_DISABLED)) {
+ if (ap->flags & ATA_FLAG_DISABLED) {
mv_unexpected_intr(ap, 0);
return;
}
@@ -3393,7 +3399,7 @@ static void mv_soc_reset_hc_port(struct mv_host_priv *hpriv,
ZERO(0x024); /* respq outp */
ZERO(0x020); /* respq inp */
ZERO(0x02c); /* test control */
- writel(0xbc, port_mmio + EDMA_IORDY_TMOUT);
+ writel(0x800, port_mmio + EDMA_IORDY_TMOUT);
}
#undef ZERO
@@ -3854,7 +3860,6 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
/**
* mv_init_host - Perform some early initialization of the host.
* @host: ATA host to initialize
- * @board_idx: controller index
*
* If possible, do an early global reset of the host. Then do
* our port init and clear/unmask all/relevant host interrupts.
@@ -3862,13 +3867,13 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
* LOCKING:
* Inherited from caller.
*/
-static int mv_init_host(struct ata_host *host, unsigned int board_idx)
+static int mv_init_host(struct ata_host *host)
{
int rc = 0, n_hc, port, hc;
struct mv_host_priv *hpriv = host->private_data;
void __iomem *mmio = hpriv->base;
- rc = mv_chip_id(host, board_idx);
+ rc = mv_chip_id(host, hpriv->board_idx);
if (rc)
goto done;
@@ -3905,14 +3910,6 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx)
void __iomem *port_mmio = mv_port_base(mmio, port);
mv_port_init(&ap->ioaddr, port_mmio);
-
-#ifdef CONFIG_PCI
- if (!IS_SOC(hpriv)) {
- unsigned int offset = port_mmio - mmio;
- ata_port_pbar_desc(ap, MV_PRIMARY_BAR, -1, "mmio");
- ata_port_pbar_desc(ap, MV_PRIMARY_BAR, offset, "port");
- }
-#endif
}
for (hc = 0; hc < n_hc; hc++) {
@@ -4035,12 +4032,21 @@ static int mv_platform_probe(struct platform_device *pdev)
return -ENOMEM;
host->private_data = hpriv;
hpriv->n_ports = n_ports;
+ hpriv->board_idx = chip_soc;
host->iomap = NULL;
hpriv->base = devm_ioremap(&pdev->dev, res->start,
resource_size(res));
hpriv->base -= SATAHC0_REG_BASE;
+#if defined(CONFIG_HAVE_CLK)
+ hpriv->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(hpriv->clk))
+ dev_notice(&pdev->dev, "cannot get clkdev\n");
+ else
+ clk_enable(hpriv->clk);
+#endif
+
/*
* (Re-)program MBUS remapping windows if we are asked to.
*/
@@ -4049,12 +4055,12 @@ static int mv_platform_probe(struct platform_device *pdev)
rc = mv_create_dma_pools(hpriv, &pdev->dev);
if (rc)
- return rc;
+ goto err;
/* initialize adapter */
- rc = mv_init_host(host, chip_soc);
+ rc = mv_init_host(host);
if (rc)
- return rc;
+ goto err;
dev_printk(KERN_INFO, &pdev->dev,
"slots %u ports %d\n", (unsigned)MV_MAX_Q_DEPTH,
@@ -4062,6 +4068,15 @@ static int mv_platform_probe(struct platform_device *pdev)
return ata_host_activate(host, platform_get_irq(pdev, 0), mv_interrupt,
IRQF_SHARED, &mv6_sht);
+err:
+#if defined(CONFIG_HAVE_CLK)
+ if (!IS_ERR(hpriv->clk)) {
+ clk_disable(hpriv->clk);
+ clk_put(hpriv->clk);
+ }
+#endif
+
+ return rc;
}
/*
@@ -4076,14 +4091,66 @@ static int __devexit mv_platform_remove(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct ata_host *host = dev_get_drvdata(dev);
-
+#if defined(CONFIG_HAVE_CLK)
+ struct mv_host_priv *hpriv = host->private_data;
+#endif
ata_host_detach(host);
+
+#if defined(CONFIG_HAVE_CLK)
+ if (!IS_ERR(hpriv->clk)) {
+ clk_disable(hpriv->clk);
+ clk_put(hpriv->clk);
+ }
+#endif
return 0;
}
+#ifdef CONFIG_PM
+static int mv_platform_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ if (host)
+ return ata_host_suspend(host, state);
+ else
+ return 0;
+}
+
+static int mv_platform_resume(struct platform_device *pdev)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ int ret;
+
+ if (host) {
+ struct mv_host_priv *hpriv = host->private_data;
+ const struct mv_sata_platform_data *mv_platform_data = \
+ pdev->dev.platform_data;
+ /*
+ * (Re-)program MBUS remapping windows if we are asked to.
+ */
+ if (mv_platform_data->dram != NULL)
+ mv_conf_mbus_windows(hpriv, mv_platform_data->dram);
+
+ /* initialize adapter */
+ ret = mv_init_host(host);
+ if (ret) {
+ printk(KERN_ERR DRV_NAME ": Error during HW init\n");
+ return ret;
+ }
+ ata_host_resume(host);
+ }
+
+ return 0;
+}
+#else
+#define mv_platform_suspend NULL
+#define mv_platform_resume NULL
+#endif
+
static struct platform_driver mv_platform_driver = {
.probe = mv_platform_probe,
.remove = __devexit_p(mv_platform_remove),
+ .suspend = mv_platform_suspend,
+ .resume = mv_platform_resume,
.driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
@@ -4094,6 +4161,9 @@ static struct platform_driver mv_platform_driver = {
#ifdef CONFIG_PCI
static int mv_pci_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent);
+#ifdef CONFIG_PM
+static int mv_pci_device_resume(struct pci_dev *pdev);
+#endif
static struct pci_driver mv_pci_driver = {
@@ -4101,6 +4171,11 @@ static struct pci_driver mv_pci_driver = {
.id_table = mv_pci_tbl,
.probe = mv_pci_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
+ .suspend = ata_pci_device_suspend,
+ .resume = mv_pci_device_resume,
+#endif
+
};
/* move to PCI layer or libata core? */
@@ -4194,7 +4269,7 @@ static int mv_pci_init_one(struct pci_dev *pdev,
const struct ata_port_info *ppi[] = { &mv_port_info[board_idx], NULL };
struct ata_host *host;
struct mv_host_priv *hpriv;
- int n_ports, rc;
+ int n_ports, port, rc;
if (!printed_version++)
dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
@@ -4208,6 +4283,7 @@ static int mv_pci_init_one(struct pci_dev *pdev,
return -ENOMEM;
host->private_data = hpriv;
hpriv->n_ports = n_ports;
+ hpriv->board_idx = board_idx;
/* acquire resources */
rc = pcim_enable_device(pdev);
@@ -4230,8 +4306,17 @@ static int mv_pci_init_one(struct pci_dev *pdev,
if (rc)
return rc;
+ for (port = 0; port < host->n_ports; port++) {
+ struct ata_port *ap = host->ports[port];
+ void __iomem *port_mmio = mv_port_base(hpriv->base, port);
+ unsigned int offset = port_mmio - hpriv->base;
+
+ ata_port_pbar_desc(ap, MV_PRIMARY_BAR, -1, "mmio");
+ ata_port_pbar_desc(ap, MV_PRIMARY_BAR, offset, "port");
+ }
+
/* initialize adapter */
- rc = mv_init_host(host, board_idx);
+ rc = mv_init_host(host);
if (rc)
return rc;
@@ -4247,6 +4332,27 @@ static int mv_pci_init_one(struct pci_dev *pdev,
return ata_host_activate(host, pdev->irq, mv_interrupt, IRQF_SHARED,
IS_GEN_I(hpriv) ? &mv5_sht : &mv6_sht);
}
+
+#ifdef CONFIG_PM
+static int mv_pci_device_resume(struct pci_dev *pdev)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ int rc;
+
+ rc = ata_pci_device_do_resume(pdev);
+ if (rc)
+ return rc;
+
+ /* initialize adapter */
+ rc = mv_init_host(host);
+ if (rc)
+ return rc;
+
+ ata_host_resume(host);
+
+ return 0;
+}
+#endif
#endif
static int mv_platform_probe(struct platform_device *pdev);