summaryrefslogtreecommitdiff
path: root/drivers/ata
diff options
context:
space:
mode:
authorHarvey Harrison <harvey.harrison@gmail.com>2008-05-14 16:17:00 -0700
committerJeff Garzik <jgarzik@redhat.com>2008-05-19 17:30:32 -0400
commit07633b5d0723ce2ec31262e1096dcf61311bf078 (patch)
treed7df0c597f64b23d684e9cc492c8ee803acf21a2 /drivers/ata
parent06aaca3f6301d04463b1ee0eb75c0352147159f2 (diff)
ata: remove FIT() macro
Use the kernel-provided clamp_val() macro. FIT was always applied to a member of struct ata_timing (unsigned short) and two constants. clamp_val will not cast to short anymore. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Diffstat (limited to 'drivers/ata')
-rw-r--r--drivers/ata/pata_ali.c10
-rw-r--r--drivers/ata/pata_amd.c14
-rw-r--r--drivers/ata/pata_cypress.c8
-rw-r--r--drivers/ata/pata_legacy.c50
-rw-r--r--drivers/ata/pata_ns87410.c6
-rw-r--r--drivers/ata/pata_ns87415.c4
-rw-r--r--drivers/ata/pata_qdi.c16
-rw-r--r--drivers/ata/pata_via.c14
-rw-r--r--drivers/ata/pata_winbond.c6
9 files changed, 64 insertions, 64 deletions
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index fcabe46f262b..0f3e659db99a 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -177,11 +177,11 @@ static void ali_program_modes(struct ata_port *ap, struct ata_device *adev, stru
u8 udma;
if (t != NULL) {
- t->setup = FIT(t->setup, 1, 8) & 7;
- t->act8b = FIT(t->act8b, 1, 8) & 7;
- t->rec8b = FIT(t->rec8b, 1, 16) & 15;
- t->active = FIT(t->active, 1, 8) & 7;
- t->recover = FIT(t->recover, 1, 16) & 15;
+ t->setup = clamp_val(t->setup, 1, 8) & 7;
+ t->act8b = clamp_val(t->act8b, 1, 8) & 7;
+ t->rec8b = clamp_val(t->rec8b, 1, 16) & 15;
+ t->active = clamp_val(t->active, 1, 8) & 7;
+ t->recover = clamp_val(t->recover, 1, 16) & 15;
pci_write_config_byte(pdev, cas, t->setup);
pci_write_config_byte(pdev, cbt, (t->act8b << 4) | t->rec8b);
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 26665c396485..57dd00f463d3 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -84,32 +84,32 @@ static void timing_setup(struct ata_port *ap, struct ata_device *adev, int offse
/* Configure the address set up timing */
pci_read_config_byte(pdev, offset + 0x0C, &t);
- t = (t & ~(3 << ((3 - dn) << 1))) | ((FIT(at.setup, 1, 4) - 1) << ((3 - dn) << 1));
+ t = (t & ~(3 << ((3 - dn) << 1))) | ((clamp_val(at.setup, 1, 4) - 1) << ((3 - dn) << 1));
pci_write_config_byte(pdev, offset + 0x0C , t);
/* Configure the 8bit I/O timing */
pci_write_config_byte(pdev, offset + 0x0E + (1 - (dn >> 1)),
- ((FIT(at.act8b, 1, 16) - 1) << 4) | (FIT(at.rec8b, 1, 16) - 1));
+ ((clamp_val(at.act8b, 1, 16) - 1) << 4) | (clamp_val(at.rec8b, 1, 16) - 1));
/* Drive timing */
pci_write_config_byte(pdev, offset + 0x08 + (3 - dn),
- ((FIT(at.active, 1, 16) - 1) << 4) | (FIT(at.recover, 1, 16) - 1));
+ ((clamp_val(at.active, 1, 16) - 1) << 4) | (clamp_val(at.recover, 1, 16) - 1));
switch (clock) {
case 1:
- t = at.udma ? (0xc0 | (FIT(at.udma, 2, 5) - 2)) : 0x03;
+ t = at.udma ? (0xc0 | (clamp_val(at.udma, 2, 5) - 2)) : 0x03;
break;
case 2:
- t = at.udma ? (0xc0 | amd_cyc2udma[FIT(at.udma, 2, 10)]) : 0x03;
+ t = at.udma ? (0xc0 | amd_cyc2udma[clamp_val(at.udma, 2, 10)]) : 0x03;
break;
case 3:
- t = at.udma ? (0xc0 | amd_cyc2udma[FIT(at.udma, 1, 10)]) : 0x03;
+ t = at.udma ? (0xc0 | amd_cyc2udma[clamp_val(at.udma, 1, 10)]) : 0x03;
break;
case 4:
- t = at.udma ? (0xc0 | amd_cyc2udma[FIT(at.udma, 1, 15)]) : 0x03;
+ t = at.udma ? (0xc0 | amd_cyc2udma[clamp_val(at.udma, 1, 15)]) : 0x03;
break;
default:
diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c
index a9c3218e22fd..2ff62608ae37 100644
--- a/drivers/ata/pata_cypress.c
+++ b/drivers/ata/pata_cypress.c
@@ -62,14 +62,14 @@ static void cy82c693_set_piomode(struct ata_port *ap, struct ata_device *adev)
return;
}
- time_16 = FIT(t.recover, 0, 15) | (FIT(t.active, 0, 15) << 4);
- time_8 = FIT(t.act8b, 0, 15) | (FIT(t.rec8b, 0, 15) << 4);
+ time_16 = clamp_val(t.recover, 0, 15) | (clamp_val(t.active, 0, 15) << 4);
+ time_8 = clamp_val(t.act8b, 0, 15) | (clamp_val(t.rec8b, 0, 15) << 4);
if (adev->devno == 0) {
pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr);
addr &= ~0x0F; /* Mask bits */
- addr |= FIT(t.setup, 0, 15);
+ addr |= clamp_val(t.setup, 0, 15);
pci_write_config_dword(pdev, CY82_IDE_ADDRSETUP, addr);
pci_write_config_byte(pdev, CY82_IDE_MASTER_IOR, time_16);
@@ -79,7 +79,7 @@ static void cy82c693_set_piomode(struct ata_port *ap, struct ata_device *adev)
pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr);
addr &= ~0xF0; /* Mask bits */
- addr |= (FIT(t.setup, 0, 15) << 4);
+ addr |= (clamp_val(t.setup, 0, 15) << 4);
pci_write_config_dword(pdev, CY82_IDE_ADDRSETUP, addr);
pci_write_config_byte(pdev, CY82_IDE_SLAVE_IOR, time_16);
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index 7af4b29cc422..fe7cc8ed4ea4 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -343,8 +343,8 @@ static void ht6560a_set_piomode(struct ata_port *ap, struct ata_device *adev)
/* Get the timing data in cycles. For now play safe at 50Mhz */
ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000);
- active = FIT(t.active, 2, 15);
- recover = FIT(t.recover, 4, 15);
+ active = clamp_val(t.active, 2, 15);
+ recover = clamp_val(t.recover, 4, 15);
inb(0x3E6);
inb(0x3E6);
@@ -377,8 +377,8 @@ static void ht6560b_set_piomode(struct ata_port *ap, struct ata_device *adev)
/* Get the timing data in cycles. For now play safe at 50Mhz */
ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000);
- active = FIT(t.active, 2, 15);
- recover = FIT(t.recover, 2, 16);
+ active = clamp_val(t.active, 2, 15);
+ recover = clamp_val(t.recover, 2, 16);
recover &= 0x15;
inb(0x3E6);
@@ -462,9 +462,9 @@ static void opti82c611a_set_piomode(struct ata_port *ap,
ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP);
}
- active = FIT(t.active, 2, 17) - 2;
- recover = FIT(t.recover, 1, 16) - 1;
- setup = FIT(t.setup, 1, 4) - 1;
+ active = clamp_val(t.active, 2, 17) - 2;
+ recover = clamp_val(t.recover, 1, 16) - 1;
+ setup = clamp_val(t.setup, 1, 4) - 1;
/* Select the right timing bank for write timing */
rc = ioread8(ap->ioaddr.lbal_addr);
@@ -541,9 +541,9 @@ static void opti82c46x_set_piomode(struct ata_port *ap, struct ata_device *adev)
ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP);
}
- active = FIT(t.active, 2, 17) - 2;
- recover = FIT(t.recover, 1, 16) - 1;
- setup = FIT(t.setup, 1, 4) - 1;
+ active = clamp_val(t.active, 2, 17) - 2;
+ recover = clamp_val(t.recover, 1, 16) - 1;
+ setup = clamp_val(t.setup, 1, 4) - 1;
/* Select the right timing bank for write timing */
rc = ioread8(ap->ioaddr.lbal_addr);
@@ -624,11 +624,11 @@ static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev)
ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
if (ld_qdi->fast) {
- active = 8 - FIT(t.active, 1, 8);
- recovery = 18 - FIT(t.recover, 3, 18);
+ active = 8 - clamp_val(t.active, 1, 8);
+ recovery = 18 - clamp_val(t.recover, 3, 18);
} else {
- active = 9 - FIT(t.active, 2, 9);
- recovery = 15 - FIT(t.recover, 0, 15);
+ active = 9 - clamp_val(t.active, 2, 9);
+ recovery = 15 - clamp_val(t.recover, 0, 15);
}
timing = (recovery << 4) | active | 0x08;
@@ -658,11 +658,11 @@ static void qdi6580dp_set_piomode(struct ata_port *ap, struct ata_device *adev)
ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
if (ld_qdi->fast) {
- active = 8 - FIT(t.active, 1, 8);
- recovery = 18 - FIT(t.recover, 3, 18);
+ active = 8 - clamp_val(t.active, 1, 8);
+ recovery = 18 - clamp_val(t.recover, 3, 18);
} else {
- active = 9 - FIT(t.active, 2, 9);
- recovery = 15 - FIT(t.recover, 0, 15);
+ active = 9 - clamp_val(t.active, 2, 9);
+ recovery = 15 - clamp_val(t.recover, 0, 15);
}
timing = (recovery << 4) | active | 0x08;
@@ -695,11 +695,11 @@ static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev)
ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
if (ld_qdi->fast) {
- active = 8 - FIT(t.active, 1, 8);
- recovery = 18 - FIT(t.recover, 3, 18);
+ active = 8 - clamp_val(t.active, 1, 8);
+ recovery = 18 - clamp_val(t.recover, 3, 18);
} else {
- active = 9 - FIT(t.active, 2, 9);
- recovery = 15 - FIT(t.recover, 0, 15);
+ active = 9 - clamp_val(t.active, 2, 9);
+ recovery = 15 - clamp_val(t.recover, 0, 15);
}
timing = (recovery << 4) | active | 0x08;
ld_qdi->clock[adev->devno] = timing;
@@ -830,8 +830,8 @@ static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev)
else
ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
- active = (FIT(t.active, 3, 17) - 1) & 0x0F;
- recovery = (FIT(t.recover, 1, 15) + 1) & 0x0F;
+ active = (clamp_val(t.active, 3, 17) - 1) & 0x0F;
+ recovery = (clamp_val(t.recover, 1, 15) + 1) & 0x0F;
timing = (active << 4) | recovery;
winbond_writecfg(ld_winbond->timing, timing, reg);
@@ -842,7 +842,7 @@ static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev)
reg |= 0x08; /* FIFO off */
if (!ata_pio_need_iordy(adev))
reg |= 0x02; /* IORDY off */
- reg |= (FIT(t.setup, 0, 3) << 6);
+ reg |= (clamp_val(t.setup, 0, 3) << 6);
winbond_writecfg(ld_winbond->timing, timing + 1, reg);
}
diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c
index 76d2455bc453..be756b7ef07e 100644
--- a/drivers/ata/pata_ns87410.c
+++ b/drivers/ata/pata_ns87410.c
@@ -91,9 +91,9 @@ static void ns87410_set_piomode(struct ata_port *ap, struct ata_device *adev)
return;
}
- at.active = FIT(at.active, 2, 16) - 2;
- at.setup = FIT(at.setup, 1, 4) - 1;
- at.recover = FIT(at.recover, 1, 12) - 1;
+ at.active = clamp_val(at.active, 2, 16) - 2;
+ at.setup = clamp_val(at.setup, 1, 4) - 1;
+ at.recover = clamp_val(at.recover, 1, 12) - 1;
idetcr = (at.setup << 6) | (recoverbits[at.recover] << 3) | activebits[at.active];
diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c
index ae92b0049bd5..e0aa7eaaee0a 100644
--- a/drivers/ata/pata_ns87415.c
+++ b/drivers/ata/pata_ns87415.c
@@ -66,8 +66,8 @@ static void ns87415_set_mode(struct ata_port *ap, struct ata_device *adev, u8 mo
ata_timing_compute(adev, adev->pio_mode, &t, T, 0);
- clocking = 17 - FIT(t.active, 2, 17);
- clocking |= (16 - FIT(t.recover, 1, 16)) << 4;
+ clocking = 17 - clamp_val(t.active, 2, 17);
+ clocking |= (16 - clamp_val(t.recover, 1, 16)) << 4;
/* Use the same timing for read and write bytes */
clocking |= (clocking << 8);
pci_write_config_word(dev, timing, clocking);
diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c
index bf45cf017753..97e5b090d7c2 100644
--- a/drivers/ata/pata_qdi.c
+++ b/drivers/ata/pata_qdi.c
@@ -60,11 +60,11 @@ static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev)
ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
if (qdi->fast) {
- active = 8 - FIT(t.active, 1, 8);
- recovery = 18 - FIT(t.recover, 3, 18);
+ active = 8 - clamp_val(t.active, 1, 8);
+ recovery = 18 - clamp_val(t.recover, 3, 18);
} else {
- active = 9 - FIT(t.active, 2, 9);
- recovery = 15 - FIT(t.recover, 0, 15);
+ active = 9 - clamp_val(t.active, 2, 9);
+ recovery = 15 - clamp_val(t.recover, 0, 15);
}
timing = (recovery << 4) | active | 0x08;
@@ -84,11 +84,11 @@ static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev)
ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
if (qdi->fast) {
- active = 8 - FIT(t.active, 1, 8);
- recovery = 18 - FIT(t.recover, 3, 18);
+ active = 8 - clamp_val(t.active, 1, 8);
+ recovery = 18 - clamp_val(t.recover, 3, 18);
} else {
- active = 9 - FIT(t.active, 2, 9);
- recovery = 15 - FIT(t.recover, 0, 15);
+ active = 9 - clamp_val(t.active, 2, 9);
+ recovery = 15 - clamp_val(t.recover, 0, 15);
}
timing = (recovery << 4) | active | 0x08;
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 2fea6cbe7755..708ed144ede9 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -259,15 +259,15 @@ static void via_do_set_mode(struct ata_port *ap, struct ata_device *adev, int mo
pci_read_config_byte(pdev, 0x4C, &setup);
setup &= ~(3 << shift);
- setup |= FIT(t.setup, 1, 4) << shift; /* 1,4 or 1,4 - 1 FIXME */
+ setup |= clamp_val(t.setup, 1, 4) << shift; /* 1,4 or 1,4 - 1 FIXME */
pci_write_config_byte(pdev, 0x4C, setup);
}
/* Load the PIO mode bits */
pci_write_config_byte(pdev, 0x4F - ap->port_no,
- ((FIT(t.act8b, 1, 16) - 1) << 4) | (FIT(t.rec8b, 1, 16) - 1));
+ ((clamp_val(t.act8b, 1, 16) - 1) << 4) | (clamp_val(t.rec8b, 1, 16) - 1));
pci_write_config_byte(pdev, 0x48 + offset,
- ((FIT(t.active, 1, 16) - 1) << 4) | (FIT(t.recover, 1, 16) - 1));
+ ((clamp_val(t.active, 1, 16) - 1) << 4) | (clamp_val(t.recover, 1, 16) - 1));
/* Load the UDMA bits according to type */
switch(udma_type) {
@@ -275,16 +275,16 @@ static void via_do_set_mode(struct ata_port *ap, struct ata_device *adev, int mo
/* BUG() ? */
/* fall through */
case 33:
- ut = t.udma ? (0xe0 | (FIT(t.udma, 2, 5) - 2)) : 0x03;
+ ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 5) - 2)) : 0x03;
break;
case 66:
- ut = t.udma ? (0xe8 | (FIT(t.udma, 2, 9) - 2)) : 0x0f;
+ ut = t.udma ? (0xe8 | (clamp_val(t.udma, 2, 9) - 2)) : 0x0f;
break;
case 100:
- ut = t.udma ? (0xe0 | (FIT(t.udma, 2, 9) - 2)) : 0x07;
+ ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 9) - 2)) : 0x07;
break;
case 133:
- ut = t.udma ? (0xe0 | (FIT(t.udma, 2, 9) - 2)) : 0x07;
+ ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 9) - 2)) : 0x07;
break;
}
diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c
index 6e52a3573fbf..474528f8fe3d 100644
--- a/drivers/ata/pata_winbond.c
+++ b/drivers/ata/pata_winbond.c
@@ -75,8 +75,8 @@ static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev)
else
ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
- active = (FIT(t.active, 3, 17) - 1) & 0x0F;
- recovery = (FIT(t.recover, 1, 15) + 1) & 0x0F;
+ active = (clamp_val(t.active, 3, 17) - 1) & 0x0F;
+ recovery = (clamp_val(t.recover, 1, 15) + 1) & 0x0F;
timing = (active << 4) | recovery;
winbond_writecfg(winbond->config, timing, reg);
@@ -87,7 +87,7 @@ static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev)
reg |= 0x08; /* FIFO off */
if (!ata_pio_need_iordy(adev))
reg |= 0x02; /* IORDY off */
- reg |= (FIT(t.setup, 0, 3) << 6);
+ reg |= (clamp_val(t.setup, 0, 3) << 6);
winbond_writecfg(winbond->config, timing + 1, reg);
}