summaryrefslogtreecommitdiff
path: root/drivers/char/Kconfig
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/char/Kconfig
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/char/Kconfig')
-rw-r--r--drivers/char/Kconfig988
1 files changed, 988 insertions, 0 deletions
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
new file mode 100644
index 000000000000..096a1202ea07
--- /dev/null
+++ b/drivers/char/Kconfig
@@ -0,0 +1,988 @@
+#
+# Character device configuration
+#
+
+menu "Character devices"
+
+config VT
+ bool "Virtual terminal" if EMBEDDED
+ select INPUT
+ default y if !VIOCONS
+ ---help---
+ If you say Y here, you will get support for terminal devices with
+ display and keyboard devices. These are called "virtual" because you
+ can run several virtual terminals (also called virtual consoles) on
+ one physical terminal. This is rather useful, for example one
+ virtual terminal can collect system messages and warnings, another
+ one can be used for a text-mode user session, and a third could run
+ an X session, all in parallel. Switching between virtual terminals
+ is done with certain key combinations, usually Alt-<function key>.
+
+ The setterm command ("man setterm") can be used to change the
+ properties (such as colors or beeping) of a virtual terminal. The
+ man page console_codes(4) ("man console_codes") contains the special
+ character sequences that can be used to change those properties
+ directly. The fonts used on virtual terminals can be changed with
+ the setfont ("man setfont") command and the key bindings are defined
+ with the loadkeys ("man loadkeys") command.
+
+ You need at least one virtual terminal device in order to make use
+ of your keyboard and monitor. Therefore, only people configuring an
+ embedded system would want to say N here in order to save some
+ memory; the only way to log into such a system is then via a serial
+ or network connection.
+
+ If unsure, say Y, or else you won't be able to do much with your new
+ shiny Linux system :-)
+
+config VT_CONSOLE
+ bool "Support for console on virtual terminal" if EMBEDDED
+ depends on VT
+ default y
+ ---help---
+ The system console is the device which receives all kernel messages
+ and warnings and which allows logins in single user mode. If you
+ answer Y here, a virtual terminal (the device used to interact with
+ a physical terminal) can be used as system console. This is the most
+ common mode of operations, so you should say Y here unless you want
+ the kernel messages be output only to a serial port (in which case
+ you should say Y to "Console on serial port", below).
+
+ If you do say Y here, by default the currently visible virtual
+ terminal (/dev/tty0) will be used as system console. You can change
+ that with a kernel command line option such as "console=tty3" which
+ would use the third virtual terminal as system console. (Try "man
+ bootparam" or see the documentation of your boot loader (lilo or
+ loadlin) about how to pass options to the kernel at boot time.)
+
+ If unsure, say Y.
+
+config HW_CONSOLE
+ bool
+ depends on VT && !S390 && !UML
+ default y
+
+config SERIAL_NONSTANDARD
+ bool "Non-standard serial port support"
+ ---help---
+ Say Y here if you have any non-standard serial boards -- boards
+ which aren't supported using the standard "dumb" serial driver.
+ This includes intelligent serial boards such as Cyclades,
+ Digiboards, etc. These are usually used for systems that need many
+ serial ports because they serve many terminals or dial-in
+ connections.
+
+ Note that the answer to this question won't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about non-standard serial boards.
+
+ Most people can say N here.
+
+config COMPUTONE
+ tristate "Computone IntelliPort Plus serial support"
+ depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+ ---help---
+ This driver supports the entire family of Intelliport II/Plus
+ controllers with the exception of the MicroChannel controllers and
+ products previous to the Intelliport II. These are multiport cards,
+ which give you many serial ports. You would need something like this
+ to connect more than two modems to your Linux box, for instance in
+ order to become a dial-in server. If you have a card like that, say
+ Y here and read <file:Documentation/computone.txt>.
+
+ To compile this driver as modules, choose M here: the
+ modules will be called ip2 and ip2main.
+
+config ROCKETPORT
+ tristate "Comtrol RocketPort support"
+ depends on SERIAL_NONSTANDARD
+ help
+ This driver supports Comtrol RocketPort and RocketModem PCI boards.
+ These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or
+ modems. For information about the RocketPort/RocketModem boards
+ and this driver read <file:Documentation/rocket.txt>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rocket.
+
+ If you want to compile this driver into the kernel, say Y here. If
+ you don't have a Comtrol RocketPort/RocketModem card installed, say N.
+
+config CYCLADES
+ tristate "Cyclades async mux support"
+ depends on SERIAL_NONSTANDARD
+ ---help---
+ This driver supports Cyclades Z and Y multiserial boards.
+ You would need something like this to connect more than two modems to
+ your Linux box, for instance in order to become a dial-in server.
+
+ For information about the Cyclades-Z card, read
+ <file:drivers/char/README.cycladesZ>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cyclades.
+
+ If you haven't heard about it, it's safe to say N.
+
+config CYZ_INTR
+ bool "Cyclades-Z interrupt mode operation (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && CYCLADES
+ help
+ The Cyclades-Z family of multiport cards allows 2 (two) driver op
+ modes: polling and interrupt. In polling mode, the driver will check
+ the status of the Cyclades-Z ports every certain amount of time
+ (which is called polling cycle and is configurable). In interrupt
+ mode, it will use an interrupt line (IRQ) in order to check the
+ status of the Cyclades-Z ports. The default op mode is polling. If
+ unsure, say N.
+
+config DIGIEPCA
+ tristate "Digiboard Intelligent Async Support"
+ depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+ ---help---
+ This is a driver for Digi International's Xx, Xeve, and Xem series
+ of cards which provide multiple serial ports. You would need
+ something like this to connect more than two modems to your Linux
+ box, for instance in order to become a dial-in server. This driver
+ supports the original PC (ISA) boards as well as PCI, and EISA. If
+ you have a card like this, say Y here and read the file
+ <file:Documentation/digiepca.txt>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called epca.
+
+config ESPSERIAL
+ tristate "Hayes ESP serial port support"
+ depends on SERIAL_NONSTANDARD && ISA && BROKEN_ON_SMP
+ help
+ This is a driver which supports Hayes ESP serial ports. Both single
+ port cards and multiport cards are supported. Make sure to read
+ <file:Documentation/hayes-esp.txt>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called esp.
+
+ If unsure, say N.
+
+config MOXA_INTELLIO
+ tristate "Moxa Intellio support"
+ depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+ help
+ Say Y here if you have a Moxa Intellio multiport serial card.
+
+ To compile this driver as a module, choose M here: the
+ module will be called moxa.
+
+config MOXA_SMARTIO
+ tristate "Moxa SmartIO support"
+ depends on SERIAL_NONSTANDARD
+ help
+ Say Y here if you have a Moxa SmartIO multiport serial card.
+
+ This driver can also be built as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want).
+ The module will be called mxser. If you want to do that, say M
+ here.
+
+config ISI
+ tristate "Multi-Tech multiport card support (EXPERIMENTAL)"
+ depends on SERIAL_NONSTANDARD
+ help
+ This is a driver for the Multi-Tech cards which provide several
+ serial ports. The driver is experimental and can currently only be
+ built as a module. The module will be called isicom.
+ If you want to do that, choose M here.
+
+config SYNCLINK
+ tristate "Microgate SyncLink card support"
+ depends on SERIAL_NONSTANDARD && PCI
+ help
+ Provides support for the SyncLink ISA and PCI multiprotocol serial
+ adapters. These adapters support asynchronous and HDLC bit
+ synchronous communication up to 10Mbps (PCI adapter).
+
+ This driver can only be built as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want).
+ The module will be called synclink. If you want to do that, say M
+ here.
+
+config SYNCLINKMP
+ tristate "SyncLink Multiport support"
+ depends on SERIAL_NONSTANDARD
+ help
+ Enable support for the SyncLink Multiport (2 or 4 ports)
+ serial adapter, running asynchronous and HDLC communications up
+ to 2.048Mbps. Each ports is independently selectable for
+ RS-232, V.35, RS-449, RS-530, and X.21
+
+ This driver may be built as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want).
+ The module will be called synclinkmp. If you want to do that, say M
+ here.
+
+config N_HDLC
+ tristate "HDLC line discipline support"
+ depends on SERIAL_NONSTANDARD
+ help
+ Allows synchronous HDLC communications with tty device drivers that
+ support synchronous HDLC such as the Microgate SyncLink adapter.
+
+ This driver can only be built as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want).
+ The module will be called n_hdlc. If you want to do that, say M
+ here.
+
+config RISCOM8
+ tristate "SDL RISCom/8 card support"
+ depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+ help
+ This is a driver for the SDL Communications RISCom/8 multiport card,
+ which gives you many serial ports. You would need something like
+ this to connect more than two modems to your Linux box, for instance
+ in order to become a dial-in server. If you have a card like that,
+ say Y here and read the file <file:Documentation/riscom8.txt>.
+
+ Also it's possible to say M here and compile this driver as kernel
+ loadable module; the module will be called riscom8.
+
+config SPECIALIX
+ tristate "Specialix IO8+ card support"
+ depends on SERIAL_NONSTANDARD
+ help
+ This is a driver for the Specialix IO8+ multiport card (both the
+ ISA and the PCI version) which gives you many serial ports. You
+ would need something like this to connect more than two modems to
+ your Linux box, for instance in order to become a dial-in server.
+
+ If you have a card like that, say Y here and read the file
+ <file:Documentation/specialix.txt>. Also it's possible to say M here
+ and compile this driver as kernel loadable module which will be
+ called specialix.
+
+config SPECIALIX_RTSCTS
+ bool "Specialix DTR/RTS pin is RTS"
+ depends on SPECIALIX
+ help
+ The Specialix IO8+ card can only support either RTS or DTR. If you
+ say N here, the driver will use the pin as "DTR" when the tty is in
+ software handshake mode. If you say Y here or hardware handshake is
+ on, it will always be RTS. Read the file
+ <file:Documentation/specialix.txt> for more information.
+
+config SX
+ tristate "Specialix SX (and SI) card support"
+ depends on SERIAL_NONSTANDARD
+ help
+ This is a driver for the SX and SI multiport serial cards.
+ Please read the file <file:Documentation/sx.txt> for details.
+
+ This driver can only be built as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want).
+ The module will be called sx. If you want to do that, say M here.
+
+config RIO
+ tristate "Specialix RIO system support"
+ depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+ help
+ This is a driver for the Specialix RIO, a smart serial card which
+ drives an outboard box that can support up to 128 ports. Product
+ information is at <http://www.perle.com/support/documentation.html#multiport>.
+ There are both ISA and PCI versions.
+
+config RIO_OLDPCI
+ bool "Support really old RIO/PCI cards"
+ depends on RIO
+ help
+ Older RIO PCI cards need some initialization-time configuration to
+ determine the IRQ and some control addresses. If you have a RIO and
+ this doesn't seem to work, try setting this to Y.
+
+config STALDRV
+ bool "Stallion multiport serial support"
+ depends on SERIAL_NONSTANDARD
+ help
+ Stallion cards give you many serial ports. You would need something
+ like this to connect more than two modems to your Linux box, for
+ instance in order to become a dial-in server. If you say Y here,
+ you will be asked for your specific card model in the next
+ questions. Make sure to read <file:Documentation/stallion.txt> in
+ this case. If you have never heard about all this, it's safe to
+ say N.
+
+config STALLION
+ tristate "Stallion EasyIO or EC8/32 support"
+ depends on STALDRV && BROKEN_ON_SMP
+ help
+ If you have an EasyIO or EasyConnection 8/32 multiport Stallion
+ card, then this is for you; say Y. Make sure to read
+ <file:Documentation/stallion.txt>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called stallion.
+
+config ISTALLION
+ tristate "Stallion EC8/64, ONboard, Brumby support"
+ depends on STALDRV && BROKEN_ON_SMP
+ help
+ If you have an EasyConnection 8/64, ONboard, Brumby or Stallion
+ serial multiport card, say Y here. Make sure to read
+ <file:Documentation/stallion.txt>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called istallion.
+
+config AU1000_UART
+ bool "Enable Au1000 UART Support"
+ depends on SERIAL_NONSTANDARD && MIPS
+ help
+ If you have an Alchemy AU1000 processor (MIPS based) and you want
+ to use serial ports, say Y. Otherwise, say N.
+
+config AU1000_SERIAL_CONSOLE
+ bool "Enable Au1000 serial console"
+ depends on AU1000_UART
+ help
+ If you have an Alchemy AU1000 processor (MIPS based) and you want
+ to use a console on a serial port, say Y. Otherwise, say N.
+
+config QTRONIX_KEYBOARD
+ bool "Enable Qtronix 990P Keyboard Support"
+ depends on IT8712
+ help
+ Images of Qtronix keyboards are at
+ <http://www.qtronix.com/keyboard.html>.
+
+config IT8172_CIR
+ bool
+ depends on QTRONIX_KEYBOARD
+ default y
+
+config IT8172_SCR0
+ bool "Enable Smart Card Reader 0 Support "
+ depends on IT8712
+ help
+ Say Y here to support smart-card reader 0 (SCR0) on the Integrated
+ Technology Express, Inc. ITE8172 SBC. Vendor page at
+ <http://www.ite.com.tw/ia/brief_it8172bsp.htm>; picture of the
+ board at <http://www.mvista.com/partners/semiconductor/ite.html>.
+
+config IT8172_SCR1
+ bool "Enable Smart Card Reader 1 Support "
+ depends on IT8712
+ help
+ Say Y here to support smart-card reader 1 (SCR1) on the Integrated
+ Technology Express, Inc. ITE8172 SBC. Vendor page at
+ <http://www.ite.com.tw/ia/brief_it8172bsp.htm>; picture of the
+ board at <http://www.mvista.com/partners/semiconductor/ite.html>.
+
+config A2232
+ tristate "Commodore A2232 serial support (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && ZORRO && BROKEN_ON_SMP
+ ---help---
+ This option supports the 2232 7-port serial card shipped with the
+ Amiga 2000 and other Zorro-bus machines, dating from 1989. At
+ a max of 19,200 bps, the ports are served by a 6551 ACIA UART chip
+ each, plus a 8520 CIA, and a master 6502 CPU and buffer as well. The
+ ports were connected with 8 pin DIN connectors on the card bracket,
+ for which 8 pin to DB25 adapters were supplied. The card also had
+ jumpers internally to toggle various pinning configurations.
+
+ This driver can be built as a module; but then "generic_serial"
+ will also be built as a module. This has to be loaded before
+ "ser_a2232". If you want to do this, answer M here.
+
+config SGI_SNSC
+ bool "SGI Altix system controller communication support"
+ depends on (IA64_SGI_SN2 || IA64_GENERIC)
+ help
+ If you have an SGI Altix and you want to enable system
+ controller communication from user space (you want this!),
+ say Y. Otherwise, say N.
+
+source "drivers/serial/Kconfig"
+
+config UNIX98_PTYS
+ bool "Unix98 PTY support" if EMBEDDED
+ default y
+ ---help---
+ A pseudo terminal (PTY) is a software device consisting of two
+ halves: a master and a slave. The slave device behaves identical to
+ a physical terminal; the master device is used by a process to
+ read data from and write data to the slave, thereby emulating a
+ terminal. Typical programs for the master side are telnet servers
+ and xterms.
+
+ Linux has traditionally used the BSD-like names /dev/ptyxx for
+ masters and /dev/ttyxx for slaves of pseudo terminals. This scheme
+ has a number of problems. The GNU C library glibc 2.1 and later,
+ however, supports the Unix98 naming standard: in order to acquire a
+ pseudo terminal, a process opens /dev/ptmx; the number of the pseudo
+ terminal is then made available to the process and the pseudo
+ terminal slave can be accessed as /dev/pts/<number>. What was
+ traditionally /dev/ttyp2 will then be /dev/pts/2, for example.
+
+ All modern Linux systems use the Unix98 ptys. Say Y unless
+ you're on an embedded system and want to conserve memory.
+
+config LEGACY_PTYS
+ bool "Legacy (BSD) PTY support"
+ default y
+ ---help---
+ A pseudo terminal (PTY) is a software device consisting of two
+ halves: a master and a slave. The slave device behaves identical to
+ a physical terminal; the master device is used by a process to
+ read data from and write data to the slave, thereby emulating a
+ terminal. Typical programs for the master side are telnet servers
+ and xterms.
+
+ Linux has traditionally used the BSD-like names /dev/ptyxx
+ for masters and /dev/ttyxx for slaves of pseudo
+ terminals. This scheme has a number of problems, including
+ security. This option enables these legacy devices; on most
+ systems, it is safe to say N.
+
+
+config LEGACY_PTY_COUNT
+ int "Maximum number of legacy PTY in use"
+ depends on LEGACY_PTYS
+ range 1 256
+ default "256"
+ ---help---
+ The maximum number of legacy PTYs that can be used at any one time.
+ The default is 256, and should be more than enough. Embedded
+ systems may want to reduce this to save memory.
+
+ When not in use, each legacy PTY occupies 12 bytes on 32-bit
+ architectures and 24 bytes on 64-bit architectures.
+
+config PRINTER
+ tristate "Parallel printer support"
+ depends on PARPORT
+ ---help---
+ If you intend to attach a printer to the parallel port of your Linux
+ box (as opposed to using a serial printer; if the connector at the
+ printer has 9 or 25 holes ["female"], then it's serial), say Y.
+ Also read the Printing-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ It is possible to share one parallel port among several devices
+ (e.g. printer and ZIP drive) and it is safe to compile the
+ corresponding drivers into the kernel.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/parport.txt>. The module will be called lp.
+
+ If you have several parallel ports, you can specify which ports to
+ use with the "lp" kernel command line option. (Try "man bootparam"
+ or see the documentation of your boot loader (lilo or loadlin) about
+ how to pass options to the kernel at boot time.) The syntax of the
+ "lp" command line option can be found in <file:drivers/char/lp.c>.
+
+ If you have more than 8 printers, you need to increase the LP_NO
+ macro in lp.c and the PARPORT_MAX macro in parport.h.
+
+config LP_CONSOLE
+ bool "Support for console on line printer"
+ depends on PRINTER
+ ---help---
+ If you want kernel messages to be printed out as they occur, you
+ can have a console on the printer. This option adds support for
+ doing that; to actually get it to happen you need to pass the
+ option "console=lp0" to the kernel at boot time.
+
+ If the printer is out of paper (or off, or unplugged, or too
+ busy..) the kernel will stall until the printer is ready again.
+ By defining CONSOLE_LP_STRICT to 0 (at your own risk) you
+ can make the kernel continue when this happens,
+ but it'll lose the kernel messages.
+
+ If unsure, say N.
+
+config PPDEV
+ tristate "Support for user-space parallel port device drivers"
+ depends on PARPORT
+ ---help---
+ Saying Y to this adds support for /dev/parport device nodes. This
+ is needed for programs that want portable access to the parallel
+ port, for instance deviceid (which displays Plug-and-Play device
+ IDs).
+
+ This is the parallel port equivalent of SCSI generic support (sg).
+ It is safe to say N to this -- it is not needed for normal printing
+ or parallel port CD-ROM/disk support.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ppdev.
+
+ If unsure, say N.
+
+config TIPAR
+ tristate "Texas Instruments parallel link cable support"
+ depends on PARPORT
+ ---help---
+ If you own a Texas Instruments graphing calculator and use a
+ parallel link cable, then you might be interested in this driver.
+
+ If you enable this driver, you will be able to communicate with
+ your calculator through a set of device nodes under /dev. The
+ main advantage of this driver is that you don't have to be root
+ to use this precise link cable (depending on the permissions on
+ the device nodes, though).
+
+ To compile this driver as a module, choose M here: the
+ module will be called tipar.
+
+ If you don't know what a parallel link cable is or what a Texas
+ Instruments graphing calculator is, then you probably don't need this
+ driver.
+
+ If unsure, say N.
+
+config HVC_CONSOLE
+ bool "pSeries Hypervisor Virtual Console support"
+ depends on PPC_PSERIES
+ help
+ pSeries machines when partitioned support a hypervisor virtual
+ console. This driver allows each pSeries partition to have a console
+ which is accessed via the HMC.
+
+config HVCS
+ tristate "IBM Hypervisor Virtual Console Server support"
+ depends on PPC_PSERIES
+ help
+ Partitionable IBM Power5 ppc64 machines allow hosting of
+ firmware virtual consoles from one Linux partition by
+ another Linux partition. This driver allows console data
+ from Linux partitions to be accessed through TTY device
+ interfaces in the device tree of a Linux partition running
+ this driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called hvcs.ko. Additionally, this module
+ will depend on arch specific APIs exported from hvcserver.ko
+ which will also be compiled when this driver is built as a
+ module.
+
+source "drivers/char/ipmi/Kconfig"
+
+source "drivers/char/watchdog/Kconfig"
+
+config DS1620
+ tristate "NetWinder thermometer support"
+ depends on ARCH_NETWINDER
+ help
+ Say Y here to include support for the thermal management hardware
+ found in the NetWinder. This driver allows the user to control the
+ temperature set points and to read the current temperature.
+
+ It is also possible to say M here to build it as a module (ds1620)
+ It is recommended to be used on a NetWinder, but it is not a
+ necessity.
+
+config NWBUTTON
+ tristate "NetWinder Button"
+ depends on ARCH_NETWINDER
+ ---help---
+ If you say Y here and create a character device node /dev/nwbutton
+ with major and minor numbers 10 and 158 ("man mknod"), then every
+ time the orange button is pressed a number of times, the number of
+ times the button was pressed will be written to that device.
+
+ This is most useful for applications, as yet unwritten, which
+ perform actions based on how many times the button is pressed in a
+ row.
+
+ Do not hold the button down for too long, as the driver does not
+ alter the behaviour of the hardware reset circuitry attached to the
+ button; it will still execute a hard reset if the button is held
+ down for longer than approximately five seconds.
+
+ To compile this driver as a module, choose M here: the
+ module will be called nwbutton.
+
+ Most people will answer Y to this question and "Reboot Using Button"
+ below to be able to initiate a system shutdown from the button.
+
+config NWBUTTON_REBOOT
+ bool "Reboot Using Button"
+ depends on NWBUTTON
+ help
+ If you say Y here, then you will be able to initiate a system
+ shutdown and reboot by pressing the orange button a number of times.
+ The number of presses to initiate the shutdown is two by default,
+ but this can be altered by modifying the value of NUM_PRESSES_REBOOT
+ in nwbutton.h and recompiling the driver or, if you compile the
+ driver as a module, you can specify the number of presses at load
+ time with "insmod button reboot_count=<something>".
+
+config NWFLASH
+ tristate "NetWinder flash support"
+ depends on ARCH_NETWINDER
+ ---help---
+ If you say Y here and create a character device /dev/flash with
+ major 10 and minor 160 you can manipulate the flash ROM containing
+ the NetWinder firmware. Be careful as accidentally overwriting the
+ flash contents can render your computer unbootable. On no account
+ allow random users access to this device. :-)
+
+ To compile this driver as a module, choose M here: the
+ module will be called nwflash.
+
+ If you're not sure, say N.
+
+config HW_RANDOM
+ tristate "Intel/AMD/VIA HW Random Number Generator support"
+ depends on (X86 || IA64) && PCI
+ ---help---
+ This driver provides kernel-side support for the Random Number
+ Generator hardware found on Intel i8xx-based motherboards,
+ AMD 76x-based motherboards, and Via Nehemiah CPUs.
+
+ Provides a character driver, used to read() entropy data.
+
+ To compile this driver as a module, choose M here: the
+ module will be called hw_random.
+
+ If unsure, say N.
+
+config NVRAM
+ tristate "/dev/nvram support"
+ depends on ATARI || X86 || X86_64 || ARM || GENERIC_NVRAM
+ ---help---
+ If you say Y here and create a character special file /dev/nvram
+ with major number 10 and minor number 144 using mknod ("man mknod"),
+ you get read and write access to the extra bytes of non-volatile
+ memory in the real time clock (RTC), which is contained in every PC
+ and most Ataris. The actual number of bytes varies, depending on the
+ nvram in the system, but is usually 114 (128-14 for the RTC).
+
+ This memory is conventionally called "CMOS RAM" on PCs and "NVRAM"
+ on Ataris. /dev/nvram may be used to view settings there, or to
+ change them (with some utility). It could also be used to frequently
+ save a few bits of very important data that may not be lost over
+ power-off and for which writing to disk is too insecure. Note
+ however that most NVRAM space in a PC belongs to the BIOS and you
+ should NEVER idly tamper with it. See Ralf Brown's interrupt list
+ for a guide to the use of CMOS bytes by your BIOS.
+
+ On Atari machines, /dev/nvram is always configured and does not need
+ to be selected.
+
+ To compile this driver as a module, choose M here: the
+ module will be called nvram.
+
+config RTC
+ tristate "Enhanced Real Time Clock Support"
+ depends on !PPC32 && !PARISC && !IA64 && !M68K
+ ---help---
+ If you say Y here and create a character special file /dev/rtc with
+ major number 10 and minor number 135 using mknod ("man mknod"), you
+ will get access to the real time clock (or hardware clock) built
+ into your computer.
+
+ Every PC has such a clock built in. It can be used to generate
+ signals from as low as 1Hz up to 8192Hz, and can also be used
+ as a 24 hour alarm. It reports status information via the file
+ /proc/driver/rtc and its behaviour is set by various ioctls on
+ /dev/rtc.
+
+ If you run Linux on a multiprocessor machine and said Y to
+ "Symmetric Multi Processing" above, you should say Y here to read
+ and set the RTC in an SMP compatible fashion.
+
+ If you think you have a use for such a device (such as periodic data
+ sampling), then say Y here, and read <file:Documentation/rtc.txt>
+ for details.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rtc.
+
+config SGI_DS1286
+ tristate "SGI DS1286 RTC support"
+ depends on SGI_IP22
+ help
+ If you say Y here and create a character special file /dev/rtc with
+ major number 10 and minor number 135 using mknod ("man mknod"), you
+ will get access to the real time clock built into your computer.
+ Every SGI has such a clock built in. It reports status information
+ via the file /proc/rtc and its behaviour is set by various ioctls on
+ /dev/rtc.
+
+config SGI_IP27_RTC
+ bool "SGI M48T35 RTC support"
+ depends on SGI_IP27
+ help
+ If you say Y here and create a character special file /dev/rtc with
+ major number 10 and minor number 135 using mknod ("man mknod"), you
+ will get access to the real time clock built into your computer.
+ Every SGI has such a clock built in. It reports status information
+ via the file /proc/rtc and its behaviour is set by various ioctls on
+ /dev/rtc.
+
+config GEN_RTC
+ tristate "Generic /dev/rtc emulation"
+ depends on RTC!=y && !IA64 && !ARM
+ ---help---
+ If you say Y here and create a character special file /dev/rtc with
+ major number 10 and minor number 135 using mknod ("man mknod"), you
+ will get access to the real time clock (or hardware clock) built
+ into your computer.
+
+ It reports status information via the file /proc/driver/rtc and its
+ behaviour is set by various ioctls on /dev/rtc. If you enable the
+ "extended RTC operation" below it will also provide an emulation
+ for RTC_UIE which is required by some programs and may improve
+ precision in some cases.
+
+ To compile this driver as a module, choose M here: the
+ module will be called genrtc.
+
+config GEN_RTC_X
+ bool "Extended RTC operation"
+ depends on GEN_RTC
+ help
+ Provides an emulation for RTC_UIE which is required by some programs
+ and may improve precision of the generic RTC support in some cases.
+
+config EFI_RTC
+ bool "EFI Real Time Clock Services"
+ depends on IA64
+
+config DS1302
+ tristate "DS1302 RTC support"
+ depends on M32R && (PLAT_M32700UT || PLAT_OPSPUT)
+ help
+ If you say Y here and create a character special file /dev/rtc with
+ major number 121 and minor number 0 using mknod ("man mknod"), you
+ will get access to the real time clock (or hardware clock) built
+ into your computer.
+
+config S3C2410_RTC
+ bool "S3C2410 RTC Driver"
+ depends on ARCH_S3C2410
+ help
+ RTC (Realtime Clock) driver for the clock inbuilt into the
+ Samsung S3C2410. This can provide periodic interrupt rates
+ from 1Hz to 64Hz for user programs, and wakeup from Alarm.
+
+config RTC_VR41XX
+ tristate "NEC VR4100 series Real Time Clock Support"
+ depends on CPU_VR41XX
+
+config COBALT_LCD
+ bool "Support for Cobalt LCD"
+ depends on MIPS_COBALT
+ help
+ This option enables support for the LCD display and buttons found
+ on Cobalt systems through a misc device.
+
+config DTLK
+ tristate "Double Talk PC internal speech card support"
+ help
+ This driver is for the DoubleTalk PC, a speech synthesizer
+ manufactured by RC Systems (<http://www.rcsys.com/>). It is also
+ called the `internal DoubleTalk'.
+
+ To compile this driver as a module, choose M here: the
+ module will be called dtlk.
+
+config R3964
+ tristate "Siemens R3964 line discipline"
+ ---help---
+ This driver allows synchronous communication with devices using the
+ Siemens R3964 packet protocol. Unless you are dealing with special
+ hardware like PLCs, you are unlikely to need this.
+
+ To compile this driver as a module, choose M here: the
+ module will be called n_r3964.
+
+ If unsure, say N.
+
+config APPLICOM
+ tristate "Applicom intelligent fieldbus card support"
+ depends on PCI
+ ---help---
+ This driver provides the kernel-side support for the intelligent
+ fieldbus cards made by Applicom International. More information
+ about these cards can be found on the WWW at the address
+ <http://www.applicom-int.com/>, or by email from David Woodhouse
+ <dwmw2@infradead.org>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called applicom.
+
+ If unsure, say N.
+
+config SONYPI
+ tristate "Sony Vaio Programmable I/O Control Device support (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && X86 && PCI && INPUT && !64BIT
+ ---help---
+ This driver enables access to the Sony Programmable I/O Control
+ Device which can be found in many (all ?) Sony Vaio laptops.
+
+ If you have one of those laptops, read
+ <file:Documentation/sonypi.txt>, and say Y or M here.
+
+ To compile this driver as a module, choose M here: the
+ module will be called sonypi.
+
+config TANBAC_TB0219
+ tristate "TANBAC TB0219 base board support"
+ depends TANBAC_TB0229
+
+
+menu "Ftape, the floppy tape device driver"
+
+config FTAPE
+ tristate "Ftape (QIC-80/Travan) support"
+ depends on BROKEN_ON_SMP && (ALPHA || X86)
+ ---help---
+ If you have a tape drive that is connected to your floppy
+ controller, say Y here.
+
+ Some tape drives (like the Seagate "Tape Store 3200" or the Iomega
+ "Ditto 3200" or the Exabyte "Eagle TR-3") come with a "high speed"
+ controller of their own. These drives (and their companion
+ controllers) are also supported if you say Y here.
+
+ If you have a special controller (such as the CMS FC-10, FC-20,
+ Mountain Mach-II, or any controller that is based on the Intel 82078
+ FDC like the high speed controllers by Seagate and Exabyte and
+ Iomega's "Ditto Dash") you must configure it by selecting the
+ appropriate entries from the "Floppy tape controllers" sub-menu
+ below and possibly modify the default values for the IRQ and DMA
+ channel and the IO base in ftape's configuration menu.
+
+ If you want to use your floppy tape drive on a PCI-bus based system,
+ please read the file <file:drivers/char/ftape/README.PCI>.
+
+ The ftape kernel driver is also available as a runtime loadable
+ module. To compile this driver as a module, choose M here: the
+ module will be called ftape.
+
+ Note that the Ftape-HOWTO is out of date (sorry) and documents the
+ older version 2.08 of this software but still contains useful
+ information. There is a web page with more recent documentation at
+ <http://www.instmath.rwth-aachen.de/~heine/ftape/>. This page
+ always contains the latest release of the ftape driver and useful
+ information (backup software, ftape related patches and
+ documentation, FAQ). Note that the file system interface has
+ changed quite a bit compared to previous versions of ftape. Please
+ read <file:Documentation/ftape.txt>.
+
+source "drivers/char/ftape/Kconfig"
+
+endmenu
+
+source "drivers/char/agp/Kconfig"
+
+source "drivers/char/drm/Kconfig"
+
+source "drivers/char/pcmcia/Kconfig"
+
+config MWAVE
+ tristate "ACP Modem (Mwave) support"
+ depends on X86
+ select SERIAL_8250
+ ---help---
+ The ACP modem (Mwave) for Linux is a WinModem. It is composed of a
+ kernel driver and a user level application. Together these components
+ support direct attachment to public switched telephone networks (PSTNs)
+ and support selected world wide countries.
+
+ This version of the ACP Modem driver supports the IBM Thinkpad 600E,
+ 600, and 770 that include on board ACP modem hardware.
+
+ The modem also supports the standard communications port interface
+ (ttySx) and is compatible with the Hayes AT Command Set.
+
+ The user level application needed to use this driver can be found at
+ the IBM Linux Technology Center (LTC) web site:
+ <http://www.ibm.com/linux/ltc/>.
+
+ If you own one of the above IBM Thinkpads which has the Mwave chipset
+ in it, say Y.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mwave.
+
+config SCx200_GPIO
+ tristate "NatSemi SCx200 GPIO Support"
+ depends on SCx200
+ help
+ Give userspace access to the GPIO pins on the National
+ Semiconductor SCx200 processors.
+
+ If compiled as a module, it will be called scx200_gpio.
+
+config RAW_DRIVER
+ tristate "RAW driver (/dev/raw/rawN) (OBSOLETE)"
+ help
+ The raw driver permits block devices to be bound to /dev/raw/rawN.
+ Once bound, I/O against /dev/raw/rawN uses efficient zero-copy I/O.
+ See the raw(8) manpage for more details.
+
+ The raw driver is deprecated and may be removed from 2.7
+ kernels. Applications should simply open the device (eg /dev/hda1)
+ with the O_DIRECT flag.
+
+config HPET
+ bool "HPET - High Precision Event Timer" if (X86 || IA64)
+ default n
+ depends on ACPI
+ help
+ If you say Y here, you will have a miscdevice named "/dev/hpet/". Each
+ open selects one of the timers supported by the HPET. The timers are
+ non-periodioc and/or periodic.
+
+config HPET_RTC_IRQ
+ bool "HPET Control RTC IRQ" if !HPET_EMULATE_RTC
+ default n
+ depends on HPET
+ help
+ If you say Y here, you will disable RTC_IRQ in drivers/char/rtc.c. It
+ is assumed the platform called hpet_alloc with the RTC IRQ values for
+ the HPET timers.
+
+config HPET_MMAP
+ bool "Allow mmap of HPET"
+ default y
+ depends on HPET
+ help
+ If you say Y here, user applications will be able to mmap
+ the HPET registers.
+
+ In some hardware implementations, the page containing HPET
+ registers may also contain other things that shouldn't be
+ exposed to the user. If this applies to your hardware,
+ say N here.
+
+config MAX_RAW_DEVS
+ int "Maximum number of RAW devices to support (1-8192)"
+ depends on RAW_DRIVER
+ default "256"
+ help
+ The maximum number of RAW devices that are supported.
+ Default is 256. Increase this number in case you need lots of
+ raw devices.
+
+config HANGCHECK_TIMER
+ tristate "Hangcheck timer"
+ depends on X86_64 || X86
+ help
+ The hangcheck-timer module detects when the system has gone
+ out to lunch past a certain margin. It can reboot the system
+ or merely print a warning.
+
+config MMTIMER
+ tristate "MMTIMER Memory mapped RTC for SGI Altix"
+ depends on IA64_GENERIC || IA64_SGI_SN2
+ default y
+ help
+ The mmtimer device allows direct userspace access to the
+ Altix system timer.
+
+source "drivers/char/tpm/Kconfig"
+
+endmenu
+