summaryrefslogtreecommitdiff
path: root/drivers/cpufreq
diff options
context:
space:
mode:
authorDominik Brodowski <linux@dominikbrodowski.net>2009-08-07 22:58:51 +0200
committerDave Jones <davej@redhat.com>2009-09-01 12:45:08 -0400
commitce6c3997c2fce74d12e6d8887a1d8cdf024fa850 (patch)
tree047d8577b12e9c5dbcf147f4a76bca537d775b4a /drivers/cpufreq
parent37d0892c5a94e208cf863e3b7bac014edee4346d (diff)
[CPUFREQ] Re-enable cpufreq suspend and resume code
Commit 4bc5d3413503 is broken and causes regressions: (1) cpufreq_driver->resume() and ->suspend() were only called on __powerpc__, but you could set them on all architectures. In fact, ->resume() was defined and used before the PPC-related commit 42d4dc3f4e1e complained about in 4bc5d3413503. (2) Therfore, the resume functions in acpi_cpufreq and speedstep-smi would never be called. (3) This means speedstep-smi would be unusuable after suspend or resume. The _real_ problem was calling cpufreq_driver->get() with interrupts off, but it re-enabling interrupts on some platforms. Why is ->get() necessary? Some systems like to change the CPU frequency behind our back, especially during BIOS-intensive operations like suspend or resume. If such systems also use a CPU frequency-dependant timing loop, delays might be off by large factors. Therefore, we need to ascertain as soon as possible that the CPU frequency is indeed at the speed we think it is. You can do this two ways: either setting it anew, or trying to get it. The latter is what was done, the former also has the same IRQ issue. So, let's try something different: defer the checking to after interrupts are re-enabled, by calling cpufreq_update_policy() (via schedule_work()). Timings may be off until this later stage, so let's watch out for resume regressions caused by the deferred handling of frequency changes behind the kernel's back. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Dave Jones <davej@redhat.com>
Diffstat (limited to 'drivers/cpufreq')
-rw-r--r--drivers/cpufreq/cpufreq.c95
1 files changed, 7 insertions, 88 deletions
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index fd69086d08d5..2968ed6a9c49 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -1250,20 +1250,11 @@ static int cpufreq_suspend(struct sys_device *sysdev, pm_message_t pmsg)
{
int ret = 0;
-#ifdef __powerpc__
int cpu = sysdev->id;
- unsigned int cur_freq = 0;
struct cpufreq_policy *cpu_policy;
dprintk("suspending cpu %u\n", cpu);
- /*
- * This whole bogosity is here because Powerbooks are made of fail.
- * No sane platform should need any of the code below to be run.
- * (it's entirely the wrong thing to do, as driver->get may
- * reenable interrupts on some architectures).
- */
-
if (!cpu_online(cpu))
return 0;
@@ -1282,47 +1273,13 @@ static int cpufreq_suspend(struct sys_device *sysdev, pm_message_t pmsg)
if (cpufreq_driver->suspend) {
ret = cpufreq_driver->suspend(cpu_policy, pmsg);
- if (ret) {
+ if (ret)
printk(KERN_ERR "cpufreq: suspend failed in ->suspend "
"step on CPU %u\n", cpu_policy->cpu);
- goto out;
- }
- }
-
- if (cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)
- goto out;
-
- if (cpufreq_driver->get)
- cur_freq = cpufreq_driver->get(cpu_policy->cpu);
-
- if (!cur_freq || !cpu_policy->cur) {
- printk(KERN_ERR "cpufreq: suspend failed to assert current "
- "frequency is what timing core thinks it is.\n");
- goto out;
- }
-
- if (unlikely(cur_freq != cpu_policy->cur)) {
- struct cpufreq_freqs freqs;
-
- if (!(cpufreq_driver->flags & CPUFREQ_PM_NO_WARN))
- dprintk("Warning: CPU frequency is %u, "
- "cpufreq assumed %u kHz.\n",
- cur_freq, cpu_policy->cur);
-
- freqs.cpu = cpu;
- freqs.old = cpu_policy->cur;
- freqs.new = cur_freq;
-
- srcu_notifier_call_chain(&cpufreq_transition_notifier_list,
- CPUFREQ_SUSPENDCHANGE, &freqs);
- adjust_jiffies(CPUFREQ_SUSPENDCHANGE, &freqs);
-
- cpu_policy->cur = cur_freq;
}
out:
cpufreq_cpu_put(cpu_policy);
-#endif /* __powerpc__ */
return ret;
}
@@ -1330,24 +1287,21 @@ out:
* cpufreq_resume - restore proper CPU frequency handling after resume
*
* 1.) resume CPUfreq hardware support (cpufreq_driver->resume())
- * 2.) if ->target and !CPUFREQ_CONST_LOOPS: verify we're in sync
- * 3.) schedule call cpufreq_update_policy() ASAP as interrupts are
- * restored.
+ * 2.) schedule call cpufreq_update_policy() ASAP as interrupts are
+ * restored. It will verify that the current freq is in sync with
+ * what we believe it to be. This is a bit later than when it
+ * should be, but nonethteless it's better than calling
+ * cpufreq_driver->get() here which might re-enable interrupts...
*/
static int cpufreq_resume(struct sys_device *sysdev)
{
int ret = 0;
-#ifdef __powerpc__
int cpu = sysdev->id;
struct cpufreq_policy *cpu_policy;
dprintk("resuming cpu %u\n", cpu);
- /* As with the ->suspend method, all the code below is
- * only necessary because Powerbooks suck.
- * See commit 42d4dc3f4e1e for jokes. */
-
if (!cpu_online(cpu))
return 0;
@@ -1373,45 +1327,10 @@ static int cpufreq_resume(struct sys_device *sysdev)
}
}
- if (!(cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)) {
- unsigned int cur_freq = 0;
-
- if (cpufreq_driver->get)
- cur_freq = cpufreq_driver->get(cpu_policy->cpu);
-
- if (!cur_freq || !cpu_policy->cur) {
- printk(KERN_ERR "cpufreq: resume failed to assert "
- "current frequency is what timing core "
- "thinks it is.\n");
- goto out;
- }
-
- if (unlikely(cur_freq != cpu_policy->cur)) {
- struct cpufreq_freqs freqs;
-
- if (!(cpufreq_driver->flags & CPUFREQ_PM_NO_WARN))
- dprintk("Warning: CPU frequency "
- "is %u, cpufreq assumed %u kHz.\n",
- cur_freq, cpu_policy->cur);
-
- freqs.cpu = cpu;
- freqs.old = cpu_policy->cur;
- freqs.new = cur_freq;
-
- srcu_notifier_call_chain(
- &cpufreq_transition_notifier_list,
- CPUFREQ_RESUMECHANGE, &freqs);
- adjust_jiffies(CPUFREQ_RESUMECHANGE, &freqs);
-
- cpu_policy->cur = cur_freq;
- }
- }
-
-out:
schedule_work(&cpu_policy->update);
+
fail:
cpufreq_cpu_put(cpu_policy);
-#endif /* __powerpc__ */
return ret;
}