summaryrefslogtreecommitdiff
path: root/drivers/firewire
diff options
context:
space:
mode:
authorKristian Høgsberg <krh@redhat.com>2007-05-30 19:06:35 -0400
committerStefan Richter <stefanr@s5r6.in-berlin.de>2007-05-31 21:40:14 +0200
commit2aef469a35a273609beaa7094d5a07c1f6d75285 (patch)
tree3aad939f26bee97a7998b67a634478d081192cee /drivers/firewire
parentb32744751e751e0abb184cf3b7359c9387a4bdf8 (diff)
firewire: Implement suspend/resume PCI driver hooks.
It's a low-impact design, that just makes suspend/resume look like a bus reset to the upper level drivers, but it should be sufficient. Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Diffstat (limited to 'drivers/firewire')
-rw-r--r--drivers/firewire/fw-card.c5
-rw-r--r--drivers/firewire/fw-ohci.c187
2 files changed, 123 insertions, 69 deletions
diff --git a/drivers/firewire/fw-card.c b/drivers/firewire/fw-card.c
index 636151a64add..9eb1edacd825 100644
--- a/drivers/firewire/fw-card.c
+++ b/drivers/firewire/fw-card.c
@@ -407,11 +407,6 @@ fw_card_add(struct fw_card *card,
card->link_speed = link_speed;
card->guid = guid;
- /* Activate link_on bit and contender bit in our self ID packets.*/
- if (card->driver->update_phy_reg(card, 4, 0,
- PHY_LINK_ACTIVE | PHY_CONTENDER) < 0)
- return -EIO;
-
/*
* The subsystem grabs a reference when the card is added and
* drops it when the driver calls fw_core_remove_card.
diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c
index 2e4cfa57126d..0d08bf9b78c2 100644
--- a/drivers/firewire/fw-ohci.c
+++ b/drivers/firewire/fw-ohci.c
@@ -417,12 +417,21 @@ ar_context_init(struct ar_context *ctx, struct fw_ohci *ohci, u32 regs)
ctx->current_buffer = ab.next;
ctx->pointer = ctx->current_buffer->data;
- reg_write(ctx->ohci, COMMAND_PTR(ctx->regs),
- le32_to_cpu(ab.descriptor.branch_address));
+ return 0;
+}
+
+static void ar_context_run(struct ar_context *ctx)
+{
+ struct ar_buffer *ab = ctx->current_buffer;
+ dma_addr_t ab_bus;
+ size_t offset;
+
+ offset = offsetof(struct ar_buffer, data);
+ ab_bus = ab->descriptor.data_address - offset;
+
+ reg_write(ctx->ohci, COMMAND_PTR(ctx->regs), ab_bus | 1);
reg_write(ctx->ohci, CONTROL_SET(ctx->regs), CONTEXT_RUN);
flush_writes(ctx->ohci);
-
- return 0;
}
static void context_tasklet(unsigned long data)
@@ -1039,11 +1048,78 @@ static irqreturn_t irq_handler(int irq, void *data)
return IRQ_HANDLED;
}
+static int software_reset(struct fw_ohci *ohci)
+{
+ int i;
+
+ reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_softReset);
+
+ for (i = 0; i < OHCI_LOOP_COUNT; i++) {
+ if ((reg_read(ohci, OHCI1394_HCControlSet) &
+ OHCI1394_HCControl_softReset) == 0)
+ return 0;
+ msleep(1);
+ }
+
+ return -EBUSY;
+}
+
static int ohci_enable(struct fw_card *card, u32 *config_rom, size_t length)
{
struct fw_ohci *ohci = fw_ohci(card);
struct pci_dev *dev = to_pci_dev(card->device);
+ if (software_reset(ohci)) {
+ fw_error("Failed to reset ohci card.\n");
+ return -EBUSY;
+ }
+
+ /*
+ * Now enable LPS, which we need in order to start accessing
+ * most of the registers. In fact, on some cards (ALI M5251),
+ * accessing registers in the SClk domain without LPS enabled
+ * will lock up the machine. Wait 50msec to make sure we have
+ * full link enabled.
+ */
+ reg_write(ohci, OHCI1394_HCControlSet,
+ OHCI1394_HCControl_LPS |
+ OHCI1394_HCControl_postedWriteEnable);
+ flush_writes(ohci);
+ msleep(50);
+
+ reg_write(ohci, OHCI1394_HCControlClear,
+ OHCI1394_HCControl_noByteSwapData);
+
+ reg_write(ohci, OHCI1394_LinkControlSet,
+ OHCI1394_LinkControl_rcvSelfID |
+ OHCI1394_LinkControl_cycleTimerEnable |
+ OHCI1394_LinkControl_cycleMaster);
+
+ reg_write(ohci, OHCI1394_ATRetries,
+ OHCI1394_MAX_AT_REQ_RETRIES |
+ (OHCI1394_MAX_AT_RESP_RETRIES << 4) |
+ (OHCI1394_MAX_PHYS_RESP_RETRIES << 8));
+
+ ar_context_run(&ohci->ar_request_ctx);
+ ar_context_run(&ohci->ar_response_ctx);
+
+ reg_write(ohci, OHCI1394_SelfIDBuffer, ohci->self_id_bus);
+ reg_write(ohci, OHCI1394_PhyUpperBound, 0x00010000);
+ reg_write(ohci, OHCI1394_IntEventClear, ~0);
+ reg_write(ohci, OHCI1394_IntMaskClear, ~0);
+ reg_write(ohci, OHCI1394_IntMaskSet,
+ OHCI1394_selfIDComplete |
+ OHCI1394_RQPkt | OHCI1394_RSPkt |
+ OHCI1394_reqTxComplete | OHCI1394_respTxComplete |
+ OHCI1394_isochRx | OHCI1394_isochTx |
+ OHCI1394_masterIntEnable |
+ OHCI1394_cycle64Seconds);
+
+ /* Activate link_on bit and contender bit in our self ID packets.*/
+ if (ohci_update_phy_reg(card, 4, 0,
+ PHY_LINK_ACTIVE | PHY_CONTENDER) < 0)
+ return -EIO;
+
/*
* When the link is not yet enabled, the atomic config rom
* update mechanism described below in ohci_set_config_rom()
@@ -1701,22 +1777,6 @@ static const struct fw_card_driver ohci_driver = {
.stop_iso = ohci_stop_iso,
};
-static int software_reset(struct fw_ohci *ohci)
-{
- int i;
-
- reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_softReset);
-
- for (i = 0; i < OHCI_LOOP_COUNT; i++) {
- if ((reg_read(ohci, OHCI1394_HCControlSet) &
- OHCI1394_HCControl_softReset) == 0)
- return 0;
- msleep(1);
- }
-
- return -EBUSY;
-}
-
static int __devinit
pci_probe(struct pci_dev *dev, const struct pci_device_id *ent)
{
@@ -1762,33 +1822,6 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent)
goto fail_iomem;
}
- if (software_reset(ohci)) {
- fw_error("Failed to reset ohci card.\n");
- err = -EBUSY;
- goto fail_registers;
- }
-
- /*
- * Now enable LPS, which we need in order to start accessing
- * most of the registers. In fact, on some cards (ALI M5251),
- * accessing registers in the SClk domain without LPS enabled
- * will lock up the machine. Wait 50msec to make sure we have
- * full link enabled.
- */
- reg_write(ohci, OHCI1394_HCControlSet,
- OHCI1394_HCControl_LPS |
- OHCI1394_HCControl_postedWriteEnable);
- flush_writes(ohci);
- msleep(50);
-
- reg_write(ohci, OHCI1394_HCControlClear,
- OHCI1394_HCControl_noByteSwapData);
-
- reg_write(ohci, OHCI1394_LinkControlSet,
- OHCI1394_LinkControl_rcvSelfID |
- OHCI1394_LinkControl_cycleTimerEnable |
- OHCI1394_LinkControl_cycleMaster);
-
ar_context_init(&ohci->ar_request_ctx, ohci,
OHCI1394_AsReqRcvContextControlSet);
@@ -1801,11 +1834,6 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent)
context_init(&ohci->at_response_ctx, ohci, AT_BUFFER_SIZE,
OHCI1394_AsRspTrContextControlSet, handle_at_packet);
- reg_write(ohci, OHCI1394_ATRetries,
- OHCI1394_MAX_AT_REQ_RETRIES |
- (OHCI1394_MAX_AT_RESP_RETRIES << 4) |
- (OHCI1394_MAX_PHYS_RESP_RETRIES << 8));
-
reg_write(ohci, OHCI1394_IsoRecvIntMaskSet, ~0);
ohci->it_context_mask = reg_read(ohci, OHCI1394_IsoRecvIntMaskSet);
reg_write(ohci, OHCI1394_IsoRecvIntMaskClear, ~0);
@@ -1835,18 +1863,6 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent)
goto fail_registers;
}
- reg_write(ohci, OHCI1394_SelfIDBuffer, ohci->self_id_bus);
- reg_write(ohci, OHCI1394_PhyUpperBound, 0x00010000);
- reg_write(ohci, OHCI1394_IntEventClear, ~0);
- reg_write(ohci, OHCI1394_IntMaskClear, ~0);
- reg_write(ohci, OHCI1394_IntMaskSet,
- OHCI1394_selfIDComplete |
- OHCI1394_RQPkt | OHCI1394_RSPkt |
- OHCI1394_reqTxComplete | OHCI1394_respTxComplete |
- OHCI1394_isochRx | OHCI1394_isochTx |
- OHCI1394_masterIntEnable |
- OHCI1394_cycle64Seconds);
-
bus_options = reg_read(ohci, OHCI1394_BusOptions);
max_receive = (bus_options >> 12) & 0xf;
link_speed = bus_options & 0x7;
@@ -1908,6 +1924,45 @@ static void pci_remove(struct pci_dev *dev)
fw_notify("Removed fw-ohci device.\n");
}
+#ifdef CONFIG_PM
+static int pci_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct fw_ohci *ohci = pci_get_drvdata(pdev);
+ int err;
+
+ software_reset(ohci);
+ free_irq(pdev->irq, ohci);
+ err = pci_save_state(pdev);
+ if (err) {
+ fw_error("pci_save_state failed with %d", err);
+ return err;
+ }
+ err = pci_set_power_state(pdev, pci_choose_state(pdev, state));
+ if (err) {
+ fw_error("pci_set_power_state failed with %d", err);
+ return err;
+ }
+
+ return 0;
+}
+
+static int pci_resume(struct pci_dev *pdev)
+{
+ struct fw_ohci *ohci = pci_get_drvdata(pdev);
+ int err;
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ err = pci_enable_device(pdev);
+ if (err) {
+ fw_error("pci_enable_device failed with %d", err);
+ return err;
+ }
+
+ return ohci_enable(&ohci->card, ohci->config_rom, CONFIG_ROM_SIZE);
+}
+#endif
+
static struct pci_device_id pci_table[] = {
{ PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_FIREWIRE_OHCI, ~0) },
{ }
@@ -1920,6 +1975,10 @@ static struct pci_driver fw_ohci_pci_driver = {
.id_table = pci_table,
.probe = pci_probe,
.remove = pci_remove,
+#ifdef CONFIG_PM
+ .resume = pci_resume,
+ .suspend = pci_suspend,
+#endif
};
MODULE_AUTHOR("Kristian Hoegsberg <krh@bitplanet.net>");