summaryrefslogtreecommitdiff
path: root/drivers/mailbox
diff options
context:
space:
mode:
authorAshwin Chaugule <ashwin.chaugule@linaro.org>2015-01-27 16:03:57 -0500
committerJassi Brar <jaswinder.singh@linaro.org>2015-03-04 21:04:22 +0530
commit33350e6b1833b15cf9c9c4c84d8534ad68b0c7b8 (patch)
tree2bb6b178c37a00ea8b1b03541aaf1ae7b0306efd /drivers/mailbox
parenta6c5170d1edea97c538c81e377e56c7b5c5b7e63 (diff)
Mailbox: Restructure and simplify PCC mailbox code
Previously the PCC driver depended on the client side to map the communication space base address. This region was was then used in the PCC driver and the client side. The client side used this region to read and write its data and the PCC driver used it to only write the PCC command. Removing this split simplifies the PCC driver a lot. This patch moves all communication region read/writes to the client side. The PCC clients can now drive the PCC mailbox controller via the mbox_client_txdone() method. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org>
Diffstat (limited to 'drivers/mailbox')
-rw-r--r--drivers/mailbox/pcc.c122
1 files changed, 37 insertions, 85 deletions
diff --git a/drivers/mailbox/pcc.c b/drivers/mailbox/pcc.c
index 977c814cdf6f..7e91d68a3ac3 100644
--- a/drivers/mailbox/pcc.c
+++ b/drivers/mailbox/pcc.c
@@ -20,10 +20,35 @@
* shared memory regions as defined in the PCC table entries. The PCC
* specification supports a Doorbell mechanism for the PCC clients
* to notify the platform about new data. This Doorbell information
- * is also specified in each PCC table entry. See pcc_send_data()
- * and pcc_tx_done() for basic mode of operation.
+ * is also specified in each PCC table entry.
*
- * For more details about PCC, please see the ACPI specification from
+ * Typical high level flow of operation is:
+ *
+ * PCC Reads:
+ * * Client tries to acquire a channel lock.
+ * * After it is acquired it writes READ cmd in communication region cmd
+ * address.
+ * * Client issues mbox_send_message() which rings the PCC doorbell
+ * for its PCC channel.
+ * * If command completes, then client has control over channel and
+ * it can proceed with its reads.
+ * * Client releases lock.
+ *
+ * PCC Writes:
+ * * Client tries to acquire channel lock.
+ * * Client writes to its communication region after it acquires a
+ * channel lock.
+ * * Client writes WRITE cmd in communication region cmd address.
+ * * Client issues mbox_send_message() which rings the PCC doorbell
+ * for its PCC channel.
+ * * If command completes, then writes have succeded and it can release
+ * the channel lock.
+ *
+ * There is a Nominal latency defined for each channel which indicates
+ * how long to wait until a command completes. If command is not complete
+ * the client needs to retry or assume failure.
+ *
+ * For more details about PCC, please see the ACPI specification from
* http://www.uefi.org/ACPIv5.1 Section 14.
*
* This file implements PCC as a Mailbox controller and allows for PCC
@@ -42,8 +67,6 @@
#include "mailbox.h"
#define MAX_PCC_SUBSPACES 256
-#define PCCS_SS_SIG_MAGIC 0x50434300
-#define PCC_CMD_COMPLETE 0x1
static struct mbox_chan *pcc_mbox_channels;
@@ -71,23 +94,6 @@ static struct mbox_chan *get_pcc_channel(int id)
}
/**
- * get_subspace_id - Given a Mailbox channel, find out the
- * PCC subspace id.
- * @chan: Pointer to Mailbox Channel from which we want
- * the index.
- * Return: Errno if not found, else positive index number.
- */
-static int get_subspace_id(struct mbox_chan *chan)
-{
- unsigned int id = chan - pcc_mbox_channels;
-
- if (id < 0 || id > pcc_mbox_ctrl.num_chans)
- return -ENOENT;
-
- return id;
-}
-
-/**
* pcc_mbox_request_channel - PCC clients call this function to
* request a pointer to their PCC subspace, from which they
* can get the details of communicating with the remote.
@@ -117,7 +123,7 @@ struct mbox_chan *pcc_mbox_request_channel(struct mbox_client *cl,
chan = get_pcc_channel(subspace_id);
if (!chan || chan->cl) {
- dev_err(dev, "%s: PCC mailbox not free\n", __func__);
+ dev_err(dev, "Channel not found for idx: %d\n", subspace_id);
return ERR_PTR(-EBUSY);
}
@@ -161,81 +167,30 @@ void pcc_mbox_free_channel(struct mbox_chan *chan)
EXPORT_SYMBOL_GPL(pcc_mbox_free_channel);
/**
- * pcc_tx_done - Callback from Mailbox controller code to
- * check if PCC message transmission completed.
- * @chan: Pointer to Mailbox channel on which previous
- * transmission occurred.
- *
- * Return: TRUE if succeeded.
- */
-static bool pcc_tx_done(struct mbox_chan *chan)
-{
- struct acpi_pcct_hw_reduced *pcct_ss = chan->con_priv;
- struct acpi_pcct_shared_memory *generic_comm_base =
- (struct acpi_pcct_shared_memory *) pcct_ss->base_address;
- u16 cmd_delay = pcct_ss->latency;
- unsigned int retries = 0;
-
- /* Try a few times while waiting for platform to consume */
- while (!(readw_relaxed(&generic_comm_base->status)
- & PCC_CMD_COMPLETE)) {
-
- if (retries++ < 5)
- udelay(cmd_delay);
- else {
- /*
- * If the remote is dead, this will cause the Mbox
- * controller to timeout after mbox client.tx_tout
- * msecs.
- */
- pr_err("PCC platform did not respond.\n");
- return false;
- }
- }
- return true;
-}
-
-/**
- * pcc_send_data - Called from Mailbox Controller code to finally
- * transmit data over channel.
+ * pcc_send_data - Called from Mailbox Controller code. Used
+ * here only to ring the channel doorbell. The PCC client
+ * specific read/write is done in the client driver in
+ * order to maintain atomicity over PCC channel once
+ * OS has control over it. See above for flow of operations.
* @chan: Pointer to Mailbox channel over which to send data.
- * @data: Actual data to be written over channel.
+ * @data: Client specific data written over channel. Used here
+ * only for debug after PCC transaction completes.
*
* Return: Err if something failed else 0 for success.
*/
static int pcc_send_data(struct mbox_chan *chan, void *data)
{
struct acpi_pcct_hw_reduced *pcct_ss = chan->con_priv;
- struct acpi_pcct_shared_memory *generic_comm_base =
- (struct acpi_pcct_shared_memory *) pcct_ss->base_address;
struct acpi_generic_address doorbell;
u64 doorbell_preserve;
u64 doorbell_val;
u64 doorbell_write;
- u16 cmd = *(u16 *) data;
- u16 ss_idx = -1;
-
- ss_idx = get_subspace_id(chan);
-
- if (ss_idx < 0) {
- pr_err("Invalid Subspace ID from PCC client\n");
- return -EINVAL;
- }
doorbell = pcct_ss->doorbell_register;
doorbell_preserve = pcct_ss->preserve_mask;
doorbell_write = pcct_ss->write_mask;
- /* Write to the shared comm region. */
- writew(cmd, &generic_comm_base->command);
-
- /* Write Subspace MAGIC value so platform can identify destination. */
- writel((PCCS_SS_SIG_MAGIC | ss_idx), &generic_comm_base->signature);
-
- /* Flip CMD COMPLETE bit */
- writew(0, &generic_comm_base->status);
-
- /* Sync notification from OSPM to Platform. */
+ /* Sync notification from OS to Platform. */
acpi_read(&doorbell_val, &doorbell);
acpi_write((doorbell_val & doorbell_preserve) | doorbell_write,
&doorbell);
@@ -245,7 +200,6 @@ static int pcc_send_data(struct mbox_chan *chan, void *data)
static struct mbox_chan_ops pcc_chan_ops = {
.send_data = pcc_send_data,
- .last_tx_done = pcc_tx_done,
};
/**
@@ -351,8 +305,6 @@ static int pcc_mbox_probe(struct platform_device *pdev)
pcc_mbox_ctrl.chans = pcc_mbox_channels;
pcc_mbox_ctrl.ops = &pcc_chan_ops;
- pcc_mbox_ctrl.txdone_poll = true;
- pcc_mbox_ctrl.txpoll_period = 10;
pcc_mbox_ctrl.dev = &pdev->dev;
pr_info("Registering PCC driver as Mailbox controller\n");