diff options
| author | Martin Blumenstingl <martin.blumenstingl@googlemail.com> | 2012-07-04 17:36:55 -0300 |
|---|---|---|
| committer | Mauro Carvalho Chehab <mchehab@redhat.com> | 2012-07-06 14:54:43 -0300 |
| commit | 9e23f50a762c236049b4965a42d86d55fcdbbfb3 (patch) | |
| tree | 1e98cb690824382058e222e9fed4261f3552549d /drivers/media/video/em28xx/em28xx-dvb.c | |
| parent | 22a09b439af25fefbe0ebd1c6c2a0d81e923f2f5 (diff) | |
[media] drxk: Make the QAM demodulator command parameters configurable
Currently there are two different implementations (in the firmware) for
the QAM demodulator command: one takes 4 and the other takes 2
parameters. The driver shows an error in dmesg When using the
4-parameter command with firmware that implements the 2-parameter
command. Unfortunately this happens every time when chaning the
frequency (on DVB-C).
This patch simply makes configurable, how many command parameters will
be used. All existing drxk_config instances using the "drxk_a3.mc" were
updated because this firmware is the only loadable firmware where the
QAM demodulator command takes 4 parameters. Some firmwares in the ROM
might also use it. The drxk instances in the em28xx-dvb driver were also
updated to silence the warnings.
If no qam_demod_parameter_count is given in the drxk_config struct, then
the correct number of parameters will be auto-detected.
[mchehab@redhat.com: Fix a small CodingStyle issue at one comment]
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Diffstat (limited to 'drivers/media/video/em28xx/em28xx-dvb.c')
| -rw-r--r-- | drivers/media/video/em28xx/em28xx-dvb.c | 4 |
1 files changed, 4 insertions, 0 deletions
diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c index f8ffe102d295..a16531fa937a 100644 --- a/drivers/media/video/em28xx/em28xx-dvb.c +++ b/drivers/media/video/em28xx/em28xx-dvb.c @@ -315,6 +315,7 @@ static struct drxk_config terratec_h5_drxk = { .single_master = 1, .no_i2c_bridge = 1, .microcode_name = "dvb-usb-terratec-h5-drxk.fw", + .qam_demod_parameter_count = 2, }; static struct drxk_config hauppauge_930c_drxk = { @@ -323,6 +324,7 @@ static struct drxk_config hauppauge_930c_drxk = { .no_i2c_bridge = 1, .microcode_name = "dvb-usb-hauppauge-hvr930c-drxk.fw", .chunk_size = 56, + .qam_demod_parameter_count = 2, }; struct drxk_config terratec_htc_stick_drxk = { @@ -331,6 +333,7 @@ struct drxk_config terratec_htc_stick_drxk = { .no_i2c_bridge = 1, .microcode_name = "dvb-usb-terratec-htc-stick-drxk.fw", .chunk_size = 54, + .qam_demod_parameter_count = 2, /* Required for the antenna_gpio to disable LNA. */ .antenna_dvbt = true, /* The windows driver uses the same. This will disable LNA. */ @@ -347,6 +350,7 @@ static struct drxk_config pctv_520e_drxk = { .adr = 0x29, .single_master = 1, .microcode_name = "dvb-demod-drxk-pctv.fw", + .qam_demod_parameter_count = 2, .chunk_size = 58, .antenna_dvbt = true, /* disable LNA */ .antenna_gpio = (1 << 2), /* disable LNA */ |