summaryrefslogtreecommitdiff
path: root/drivers/mmc/mmc.c
diff options
context:
space:
mode:
authorPierre Ossman <drzeus@drzeus.cx>2007-01-07 16:59:06 +0100
committerPierre Ossman <drzeus@drzeus.cx>2007-02-04 20:54:11 +0100
commitae06eaf9abb1fd00e413753786e13406eda5819a (patch)
tree9b4a71e649d933734f09ee95d016a4fe143169c6 /drivers/mmc/mmc.c
parent5ba593a97206fb96dc0e63f209e6ade86452844f (diff)
mmc: Graceful fallback for fancy features
MMC high-speed, wide bus support and SD high-speed are functions that aren't critical for correct operation of the card. As such, they shouldn't mark the card as bad or dead when there is a failure activating these features. This is needed in particular on some really stupid hardware (e.g. Winbond's) where not all data transfer commands are supported. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Diffstat (limited to 'drivers/mmc/mmc.c')
-rw-r--r--drivers/mmc/mmc.c16
1 files changed, 7 insertions, 9 deletions
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index fb04bdd26c36..5046a1661342 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -1092,7 +1092,8 @@ static void mmc_process_ext_csds(struct mmc_host *host)
mmc_wait_for_req(host, &mrq);
if (cmd.error != MMC_ERR_NONE || data.error != MMC_ERR_NONE) {
- mmc_card_set_dead(card);
+ printk("%s: unable to read EXT_CSD, performance "
+ "might suffer.\n", mmc_hostname(card->host));
continue;
}
@@ -1108,7 +1109,6 @@ static void mmc_process_ext_csds(struct mmc_host *host)
printk("%s: card is mmc v4 but doesn't support "
"any high-speed modes.\n",
mmc_hostname(card->host));
- mmc_card_set_bad(card);
continue;
}
@@ -1289,7 +1289,9 @@ static void mmc_read_switch_caps(struct mmc_host *host)
mmc_wait_for_req(host, &mrq);
if (cmd.error != MMC_ERR_NONE || data.error != MMC_ERR_NONE) {
- mmc_card_set_dead(card);
+ printk("%s: unable to read switch capabilities, "
+ "performance might suffer.\n",
+ mmc_hostname(card->host));
continue;
}
@@ -1321,12 +1323,8 @@ static void mmc_read_switch_caps(struct mmc_host *host)
mmc_wait_for_req(host, &mrq);
- if (cmd.error != MMC_ERR_NONE || data.error != MMC_ERR_NONE) {
- mmc_card_set_dead(card);
- continue;
- }
-
- if ((status[16] & 0xF) != 1) {
+ if (cmd.error != MMC_ERR_NONE || data.error != MMC_ERR_NONE ||
+ (status[16] & 0xF) != 1) {
printk(KERN_WARNING "%s: Problem switching card "
"into high-speed mode!\n",
mmc_hostname(host));