summaryrefslogtreecommitdiff
path: root/drivers/mtd/mtdcore.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2018-06-08 10:39:20 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2018-06-08 10:39:20 -0700
commitf4e70c2e5f1406e715f6359ae341e76e5004fb98 (patch)
tree79622d866d0cb8bdb494718e11d458770aee9713 /drivers/mtd/mtdcore.c
parentea125dedbc14b305307889c40d74d564c4419851 (diff)
parentb771327a4530e7ff05ae173d4903cd70357bb803 (diff)
Merge tag 'mtd/for-4.18' of git://git.infradead.org/linux-mtd
Pull MTD updates from Boris Brezillon: "Core changes: - Add a sysfs attribute to expose available OOB size Driver changes: - Remove HAS_DMA dependency on various drivers - Use dev_get_drvdata() instead of platform_get_drvdata() in docg3 - Replace msleep by usleep_range() in the dataflash driver - Avoid VLA usage in nftl layers - Remove useless .owner assignment in pismo - Fix various issues in the CFI driver - Improve TRX partition handling expose a DT compat for this part parser - Clarify OFFSET_CONTINUOUS meaning NAND core changes: - Add Miquel as a NAND maintainer - Add access mode to the nand_page_io_req struct - Fix kernel-doc in rawnand.h - Support bit-wise majority to recover from corrupted ONFI parameter pages - Stop checking FAIL bit after a SET_FEATURES, as documented in the ONFI spec Raw NAND Driver changes: - Fix and cleanup the error path of many NAND controller drivers - GPMI: + Cleanup/simplification of a few aspects in the driver + Take ECC setup specified in the DT into account - sunxi: remove support for GPIO-based R/B polling - MTK: + Use of_device_get_match_data() instead of of_match_device() + Add an entry in MAINTAINERS for this driver + Fix nand-ecc-step-size and nand-ecc-strength description in the DT bindings doc - fsl_ifc: fix ->cmdfunc() to read more than one ONFI parameter page OneNAND driver changes: - samsung: use dev_get_drvdata() instead of platform_get_drvdata() SPI NOR core changes: - Add support for a bunch of SPI NOR chips - Clear EAR reg when switching to 3-byte addressing mode on Winbond chips SPI NOR controller driver changes: - cadence: Add DMA support for direct mode reads - hisi: Prefix a few functions with hisi_ - intel: + Mark the driver as "dangerous" in Kconfig + Fix atomic sequence handling + Pass a 40us delay (instead of 0us) to readl_poll_timeout() - fsl: + fix a typo in a function name + add support for IP variants embedded in the ls2080a and ls1080a SoCs - stm32: request exclusive control of the reset line" * tag 'mtd/for-4.18' of git://git.infradead.org/linux-mtd: (66 commits) mtd: nand: Pass mode information to nand_page_io_req mtd: cfi_cmdset_0002: Change erase one block to enable XIP once mtd: cfi_cmdset_0002: Change erase functions to check chip good only mtd: cfi_cmdset_0002: Change erase functions to retry for error mtd: cfi_cmdset_0002: Change definition naming to retry write operation mtd: cfi_cmdset_0002: Change write buffer to check correct value mtd: cmdlinepart: Update comment for introduction of OFFSET_CONTINUOUS mtd: bcm47xxpart: add of_match_table with a new DT binding dt-bindings: mtd: document Broadcom's BCM47xx partitions mtd: spi-nor: Add support for EN25QH32 mtd: spi-nor: Add support for is25wp series chips mtd: spi-nor: Add Winbond w25q32jv support mtd: spi-nor: fsl-quadspi: add support for ls2080a/ls1080a mtd: spi-nor: stm32-quadspi: explicitly request exclusive reset control mtd: spi-nor: intel: provide a range for poll_timout mtd: spi-nor: fsl-quadspi: fix api naming typo _init_ahb_read mtd: spi-nor: intel-spi: Explicitly mark the driver as dangerous in Kconfig mtd: spi-nor: intel-spi: Fix atomic sequence handling mtd: rawnand: Do not check FAIL bit when executing a SET_FEATURES op mtd: rawnand: use bit-wise majority to recover the ONFI param page ...
Diffstat (limited to 'drivers/mtd/mtdcore.c')
-rw-r--r--drivers/mtd/mtdcore.c24
1 files changed, 14 insertions, 10 deletions
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 64a1fcaafd9a..42395df06be9 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -210,6 +210,15 @@ static ssize_t mtd_oobsize_show(struct device *dev,
}
static DEVICE_ATTR(oobsize, S_IRUGO, mtd_oobsize_show, NULL);
+static ssize_t mtd_oobavail_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct mtd_info *mtd = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE, "%u\n", mtd->oobavail);
+}
+static DEVICE_ATTR(oobavail, S_IRUGO, mtd_oobavail_show, NULL);
+
static ssize_t mtd_numeraseregions_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -327,6 +336,7 @@ static struct attribute *mtd_attrs[] = {
&dev_attr_writesize.attr,
&dev_attr_subpagesize.attr,
&dev_attr_oobsize.attr,
+ &dev_attr_oobavail.attr,
&dev_attr_numeraseregions.attr,
&dev_attr_name.attr,
&dev_attr_ecc_strength.attr,
@@ -690,7 +700,6 @@ int mtd_device_parse_register(struct mtd_info *mtd, const char * const *types,
const struct mtd_partition *parts,
int nr_parts)
{
- struct mtd_partitions parsed = { };
int ret;
mtd_set_dev_defaults(mtd);
@@ -702,13 +711,10 @@ int mtd_device_parse_register(struct mtd_info *mtd, const char * const *types,
}
/* Prefer parsed partitions over driver-provided fallback */
- ret = parse_mtd_partitions(mtd, types, &parsed, parser_data);
- if (!ret && parsed.nr_parts) {
- parts = parsed.parts;
- nr_parts = parsed.nr_parts;
- }
-
- if (nr_parts)
+ ret = parse_mtd_partitions(mtd, types, parser_data);
+ if (ret > 0)
+ ret = 0;
+ else if (nr_parts)
ret = add_mtd_partitions(mtd, parts, nr_parts);
else if (!device_is_registered(&mtd->dev))
ret = add_mtd_device(mtd);
@@ -734,8 +740,6 @@ int mtd_device_parse_register(struct mtd_info *mtd, const char * const *types,
}
out:
- /* Cleanup any parsed partitions */
- mtd_part_parser_cleanup(&parsed);
if (ret && device_is_registered(&mtd->dev))
del_mtd_device(mtd);