summaryrefslogtreecommitdiff
path: root/drivers/net/bnx2.c
diff options
context:
space:
mode:
authorEddie Wai <waie@broadcom.com>2010-11-24 13:48:54 +0000
committerDavid S. Miller <davem@davemloft.net>2010-11-28 10:47:19 -0800
commita5dac108d57072eec4d6745f32c162524509f2cb (patch)
treee5177d7c181866ecea357ef1a9c0109d7ca39b90 /drivers/net/bnx2.c
parent19eb5cc559f716dc98ce03a5bad6030fdc71e897 (diff)
bnx2: Fix reset bug on 5709
The 5709 chip requires the BNX2_MISC_NEW_CORE_CTL_DMA_ENABLE bit to be cleared and polling for pending DMAs to complete before chip reset. Without this step, we've seen NMIs during repeated resets of the chip. Signed-off-by: Eddie Wai <waie@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/bnx2.c')
-rw-r--r--drivers/net/bnx2.c29
1 files changed, 22 insertions, 7 deletions
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 0de196da4d4a..78f91ef44969 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -4640,13 +4640,28 @@ bnx2_reset_chip(struct bnx2 *bp, u32 reset_code)
/* Wait for the current PCI transaction to complete before
* issuing a reset. */
- REG_WR(bp, BNX2_MISC_ENABLE_CLR_BITS,
- BNX2_MISC_ENABLE_CLR_BITS_TX_DMA_ENABLE |
- BNX2_MISC_ENABLE_CLR_BITS_DMA_ENGINE_ENABLE |
- BNX2_MISC_ENABLE_CLR_BITS_RX_DMA_ENABLE |
- BNX2_MISC_ENABLE_CLR_BITS_HOST_COALESCE_ENABLE);
- val = REG_RD(bp, BNX2_MISC_ENABLE_CLR_BITS);
- udelay(5);
+ if ((CHIP_NUM(bp) == CHIP_NUM_5706) ||
+ (CHIP_NUM(bp) == CHIP_NUM_5708)) {
+ REG_WR(bp, BNX2_MISC_ENABLE_CLR_BITS,
+ BNX2_MISC_ENABLE_CLR_BITS_TX_DMA_ENABLE |
+ BNX2_MISC_ENABLE_CLR_BITS_DMA_ENGINE_ENABLE |
+ BNX2_MISC_ENABLE_CLR_BITS_RX_DMA_ENABLE |
+ BNX2_MISC_ENABLE_CLR_BITS_HOST_COALESCE_ENABLE);
+ val = REG_RD(bp, BNX2_MISC_ENABLE_CLR_BITS);
+ udelay(5);
+ } else { /* 5709 */
+ val = REG_RD(bp, BNX2_MISC_NEW_CORE_CTL);
+ val &= ~BNX2_MISC_NEW_CORE_CTL_DMA_ENABLE;
+ REG_WR(bp, BNX2_MISC_NEW_CORE_CTL, val);
+ val = REG_RD(bp, BNX2_MISC_NEW_CORE_CTL);
+
+ for (i = 0; i < 100; i++) {
+ msleep(1);
+ val = REG_RD(bp, BNX2_PCICFG_DEVICE_CONTROL);
+ if (!(val & BNX2_PCICFG_DEVICE_STATUS_NO_PEND))
+ break;
+ }
+ }
/* Wait for the firmware to tell us it is ok to issue a reset. */
bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT0 | reset_code, 1, 1);