summaryrefslogtreecommitdiff
path: root/drivers/net/bnx2x.c
diff options
context:
space:
mode:
authorEliezer Tamir <eliezert@broadcom.com>2008-02-28 11:51:50 -0800
committerDavid S. Miller <davem@davemloft.net>2008-02-28 11:51:50 -0800
commitf14106478e372e64be54a3cdab1e2fa83a5c8a35 (patch)
tree5d66afdfdb0e9752e6ca13b28f6e61c4d8558e39 /drivers/net/bnx2x.c
parent250479504ff7d7e8c7d5cf85bedd40fb8d725429 (diff)
[BNX2X]: Correct Link management
Properly protect PHY access between two devices on the same board with a HW lock. Use GPIO to clear all previous configurations before changing link parameters. Shut down the external PHY in case of fan failure. Reducing the MDC/MDIO clock to 2.5MHz due to problems with some devices. Resolve the flow control response according to autoneg with external PHY. Unmasking all PHY interrupts in single write to prevent a race in the interrupts order. LASI indication fixes to work with peculiarities of PHYs. Disable MAC RX to avoid a HW bug when closing the MAC under traffic. Disable parallel detection on HiGig due to HW limitation. Updating the shared memory structure to work with the current bootcode. Signed-off-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/bnx2x.c')
-rw-r--r--drivers/net/bnx2x.c1707
1 files changed, 1273 insertions, 434 deletions
diff --git a/drivers/net/bnx2x.c b/drivers/net/bnx2x.c
index 77867161968b..5cd785064ba3 100644
--- a/drivers/net/bnx2x.c
+++ b/drivers/net/bnx2x.c
@@ -1,6 +1,6 @@
/* bnx2x.c: Broadcom Everest network driver.
*
- * Copyright (c) 2007 Broadcom Corporation
+ * Copyright (c) 2007-2008 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -65,7 +65,7 @@
#define DRV_MODULE_VERSION "0.40.15"
#define DRV_MODULE_RELDATE "$DateTime: 2007/11/15 07:28:37 $"
-#define BNX2X_BC_VER 0x040009
+#define BNX2X_BC_VER 0x040200
/* Time in jiffies before concluding the transmitter is hung. */
#define TX_TIMEOUT (5*HZ)
@@ -78,7 +78,7 @@ MODULE_AUTHOR("Eliezer Tamir <eliezert@broadcom.com>");
MODULE_DESCRIPTION("Broadcom NetXtreme II BCM57710 Driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_MODULE_VERSION);
-MODULE_INFO(cvs_version, "$Revision: #356 $");
+MODULE_INFO(cvs_version, "$Revision: #404 $");
static int use_inta;
static int poll;
@@ -1181,12 +1181,175 @@ static u32 bnx2x_bits_dis(struct bnx2x *bp, u32 reg, u32 bits)
return val;
}
+static int bnx2x_hw_lock(struct bnx2x *bp, u32 resource)
+{
+ u32 cnt;
+ u32 lock_status;
+ u32 resource_bit = (1 << resource);
+ u8 func = bp->port;
+
+ /* Validating that the resource is within range */
+ if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
+ DP(NETIF_MSG_HW,
+ "resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n",
+ resource, HW_LOCK_MAX_RESOURCE_VALUE);
+ return -EINVAL;
+ }
+
+ /* Validating that the resource is not already taken */
+ lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + func*8);
+ if (lock_status & resource_bit) {
+ DP(NETIF_MSG_HW, "lock_status 0x%x resource_bit 0x%x\n",
+ lock_status, resource_bit);
+ return -EEXIST;
+ }
+
+ /* Try for 1 second every 5ms */
+ for (cnt = 0; cnt < 200; cnt++) {
+ /* Try to acquire the lock */
+ REG_WR(bp, MISC_REG_DRIVER_CONTROL_1 + func*8 + 4,
+ resource_bit);
+ lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + func*8);
+ if (lock_status & resource_bit)
+ return 0;
+
+ msleep(5);
+ }
+ DP(NETIF_MSG_HW, "Timeout\n");
+ return -EAGAIN;
+}
+
+static int bnx2x_hw_unlock(struct bnx2x *bp, u32 resource)
+{
+ u32 lock_status;
+ u32 resource_bit = (1 << resource);
+ u8 func = bp->port;
+
+ /* Validating that the resource is within range */
+ if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
+ DP(NETIF_MSG_HW,
+ "resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n",
+ resource, HW_LOCK_MAX_RESOURCE_VALUE);
+ return -EINVAL;
+ }
+
+ /* Validating that the resource is currently taken */
+ lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + func*8);
+ if (!(lock_status & resource_bit)) {
+ DP(NETIF_MSG_HW, "lock_status 0x%x resource_bit 0x%x\n",
+ lock_status, resource_bit);
+ return -EFAULT;
+ }
+
+ REG_WR(bp, MISC_REG_DRIVER_CONTROL_1 + func*8, resource_bit);
+ return 0;
+}
+
+static int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode)
+{
+ /* The GPIO should be swapped if swap register is set and active */
+ int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) &&
+ REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ bp->port;
+ int gpio_shift = gpio_num +
+ (gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0);
+ u32 gpio_mask = (1 << gpio_shift);
+ u32 gpio_reg;
+
+ if (gpio_num > MISC_REGISTERS_GPIO_3) {
+ BNX2X_ERR("Invalid GPIO %d\n", gpio_num);
+ return -EINVAL;
+ }
+
+ bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
+ /* read GPIO and mask except the float bits */
+ gpio_reg = (REG_RD(bp, MISC_REG_GPIO) & MISC_REGISTERS_GPIO_FLOAT);
+
+ switch (mode) {
+ case MISC_REGISTERS_GPIO_OUTPUT_LOW:
+ DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> output low\n",
+ gpio_num, gpio_shift);
+ /* clear FLOAT and set CLR */
+ gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
+ gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_CLR_POS);
+ break;
+
+ case MISC_REGISTERS_GPIO_OUTPUT_HIGH:
+ DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> output high\n",
+ gpio_num, gpio_shift);
+ /* clear FLOAT and set SET */
+ gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
+ gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_SET_POS);
+ break;
+
+ case MISC_REGISTERS_GPIO_INPUT_HI_Z :
+ DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> input\n",
+ gpio_num, gpio_shift);
+ /* set FLOAT */
+ gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
+ break;
+
+ default:
+ break;
+ }
+
+ REG_WR(bp, MISC_REG_GPIO, gpio_reg);
+ bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_GPIO);
+
+ return 0;
+}
+
+static int bnx2x_set_spio(struct bnx2x *bp, int spio_num, u32 mode)
+{
+ u32 spio_mask = (1 << spio_num);
+ u32 spio_reg;
+
+ if ((spio_num < MISC_REGISTERS_SPIO_4) ||
+ (spio_num > MISC_REGISTERS_SPIO_7)) {
+ BNX2X_ERR("Invalid SPIO %d\n", spio_num);
+ return -EINVAL;
+ }
+
+ bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_SPIO);
+ /* read SPIO and mask except the float bits */
+ spio_reg = (REG_RD(bp, MISC_REG_SPIO) & MISC_REGISTERS_SPIO_FLOAT);
+
+ switch (mode) {
+ case MISC_REGISTERS_SPIO_OUTPUT_LOW :
+ DP(NETIF_MSG_LINK, "Set SPIO %d -> output low\n", spio_num);
+ /* clear FLOAT and set CLR */
+ spio_reg &= ~(spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS);
+ spio_reg |= (spio_mask << MISC_REGISTERS_SPIO_CLR_POS);
+ break;
+
+ case MISC_REGISTERS_SPIO_OUTPUT_HIGH :
+ DP(NETIF_MSG_LINK, "Set SPIO %d -> output high\n", spio_num);
+ /* clear FLOAT and set SET */
+ spio_reg &= ~(spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS);
+ spio_reg |= (spio_mask << MISC_REGISTERS_SPIO_SET_POS);
+ break;
+
+ case MISC_REGISTERS_SPIO_INPUT_HI_Z:
+ DP(NETIF_MSG_LINK, "Set SPIO %d -> input\n", spio_num);
+ /* set FLOAT */
+ spio_reg |= (spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS);
+ break;
+
+ default:
+ break;
+ }
+
+ REG_WR(bp, MISC_REG_SPIO, spio_reg);
+ bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_SPIO);
+
+ return 0;
+}
+
static int bnx2x_mdio22_write(struct bnx2x *bp, u32 reg, u32 val)
{
- int rc;
- u32 tmp, i;
int port = bp->port;
u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
+ u32 tmp;
+ int i, rc;
/* DP(NETIF_MSG_HW, "phy_addr 0x%x reg 0x%x val 0x%08x\n",
bp->phy_addr, reg, val); */
@@ -1238,8 +1401,8 @@ static int bnx2x_mdio22_read(struct bnx2x *bp, u32 reg, u32 *ret_val)
{
int port = bp->port;
u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
- u32 val, i;
- int rc;
+ u32 val;
+ int i, rc;
if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) {
@@ -1288,58 +1451,54 @@ static int bnx2x_mdio22_read(struct bnx2x *bp, u32 reg, u32 *ret_val)
return rc;
}
-static int bnx2x_mdio45_write(struct bnx2x *bp, u32 reg, u32 addr, u32 val)
+static int bnx2x_mdio45_ctrl_write(struct bnx2x *bp, u32 mdio_ctrl,
+ u32 phy_addr, u32 reg, u32 addr, u32 val)
{
- int rc = 0;
- u32 tmp, i;
- int port = bp->port;
- u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
-
- if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) {
-
- tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
- tmp &= ~EMAC_MDIO_MODE_AUTO_POLL;
- EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, tmp);
- REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
- udelay(40);
- }
+ u32 tmp;
+ int i, rc = 0;
- /* set clause 45 mode */
- tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
- tmp |= EMAC_MDIO_MODE_CLAUSE_45;
- EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, tmp);
+ /* set clause 45 mode, slow down the MDIO clock to 2.5MHz
+ * (a value of 49==0x31) and make sure that the AUTO poll is off
+ */
+ tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
+ tmp &= ~(EMAC_MDIO_MODE_AUTO_POLL | EMAC_MDIO_MODE_CLOCK_CNT);
+ tmp |= (EMAC_MDIO_MODE_CLAUSE_45 |
+ (49 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT));
+ REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, tmp);
+ REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
+ udelay(40);
/* address */
- tmp = ((bp->phy_addr << 21) | (reg << 16) | addr |
+ tmp = ((phy_addr << 21) | (reg << 16) | addr |
EMAC_MDIO_COMM_COMMAND_ADDRESS |
EMAC_MDIO_COMM_START_BUSY);
- EMAC_WR(EMAC_REG_EMAC_MDIO_COMM, tmp);
+ REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp);
for (i = 0; i < 50; i++) {
udelay(10);
- tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM);
+ tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM);
if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) {
udelay(5);
break;
}
}
-
if (tmp & EMAC_MDIO_COMM_START_BUSY) {
BNX2X_ERR("write phy register failed\n");
rc = -EBUSY;
+
} else {
/* data */
- tmp = ((bp->phy_addr << 21) | (reg << 16) | val |
+ tmp = ((phy_addr << 21) | (reg << 16) | val |
EMAC_MDIO_COMM_COMMAND_WRITE_45 |
EMAC_MDIO_COMM_START_BUSY);
- EMAC_WR(EMAC_REG_EMAC_MDIO_COMM, tmp);
+ REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp);
for (i = 0; i < 50; i++) {
udelay(10);
- tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM);
+ tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM);
if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) {
udelay(5);
break;
@@ -1353,75 +1512,78 @@ static int bnx2x_mdio45_write(struct bnx2x *bp, u32 reg, u32 addr, u32 val)
}
}
- /* unset clause 45 mode */
- tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
- tmp &= ~EMAC_MDIO_MODE_CLAUSE_45;
- EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, tmp);
-
- if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) {
-
- tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
+ /* unset clause 45 mode, set the MDIO clock to a faster value
+ * (0x13 => 6.25Mhz) and restore the AUTO poll if needed
+ */
+ tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
+ tmp &= ~(EMAC_MDIO_MODE_CLAUSE_45 | EMAC_MDIO_MODE_CLOCK_CNT);
+ tmp |= (0x13 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT);
+ if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG)
tmp |= EMAC_MDIO_MODE_AUTO_POLL;
- EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, tmp);
- }
+ REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, tmp);
return rc;
}
-static int bnx2x_mdio45_read(struct bnx2x *bp, u32 reg, u32 addr,
- u32 *ret_val)
+static int bnx2x_mdio45_write(struct bnx2x *bp, u32 phy_addr, u32 reg,
+ u32 addr, u32 val)
{
- int port = bp->port;
- u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
- u32 val, i;
- int rc = 0;
+ u32 emac_base = bp->port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
- if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) {
+ return bnx2x_mdio45_ctrl_write(bp, emac_base, phy_addr,
+ reg, addr, val);
+}
- val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
- val &= ~EMAC_MDIO_MODE_AUTO_POLL;
- EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, val);
- REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
- udelay(40);
- }
+static int bnx2x_mdio45_ctrl_read(struct bnx2x *bp, u32 mdio_ctrl,
+ u32 phy_addr, u32 reg, u32 addr,
+ u32 *ret_val)
+{
+ u32 val;
+ int i, rc = 0;
- /* set clause 45 mode */
- val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
- val |= EMAC_MDIO_MODE_CLAUSE_45;
- EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, val);
+ /* set clause 45 mode, slow down the MDIO clock to 2.5MHz
+ * (a value of 49==0x31) and make sure that the AUTO poll is off
+ */
+ val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
+ val &= ~(EMAC_MDIO_MODE_AUTO_POLL | EMAC_MDIO_MODE_CLOCK_CNT);
+ val |= (EMAC_MDIO_MODE_CLAUSE_45 |
+ (49 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT));
+ REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, val);
+ REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
+ udelay(40);
/* address */
- val = ((bp->phy_addr << 21) | (reg << 16) | addr |
+ val = ((phy_addr << 21) | (reg << 16) | addr |
EMAC_MDIO_COMM_COMMAND_ADDRESS |
EMAC_MDIO_COMM_START_BUSY);
- EMAC_WR(EMAC_REG_EMAC_MDIO_COMM, val);
+ REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val);
for (i = 0; i < 50; i++) {
udelay(10);
- val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM);
+ val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM);
if (!(val & EMAC_MDIO_COMM_START_BUSY)) {
udelay(5);
break;
}
}
-
if (val & EMAC_MDIO_COMM_START_BUSY) {
BNX2X_ERR("read phy register failed\n");
*ret_val = 0;
rc = -EBUSY;
+
} else {
/* data */
- val = ((bp->phy_addr << 21) | (reg << 16) |
+ val = ((phy_addr << 21) | (reg << 16) |
EMAC_MDIO_COMM_COMMAND_READ_45 |
EMAC_MDIO_COMM_START_BUSY);
- EMAC_WR(EMAC_REG_EMAC_MDIO_COMM, val);
+ REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val);
for (i = 0; i < 50; i++) {
udelay(10);
- val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM);
+ val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM);
if (!(val & EMAC_MDIO_COMM_START_BUSY)) {
val &= EMAC_MDIO_COMM_DATA;
break;
@@ -1438,31 +1600,39 @@ static int bnx2x_mdio45_read(struct bnx2x *bp, u32 reg, u32 addr,
*ret_val = val;
}
- /* unset clause 45 mode */
- val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
- val &= ~EMAC_MDIO_MODE_CLAUSE_45;
- EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, val);
-
- if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) {
-
- val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
+ /* unset clause 45 mode, set the MDIO clock to a faster value
+ * (0x13 => 6.25Mhz) and restore the AUTO poll if needed
+ */
+ val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
+ val &= ~(EMAC_MDIO_MODE_CLAUSE_45 | EMAC_MDIO_MODE_CLOCK_CNT);
+ val |= (0x13 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT);
+ if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG)
val |= EMAC_MDIO_MODE_AUTO_POLL;
- EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, val);
- }
+ REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, val);
return rc;
}
-static int bnx2x_mdio45_vwrite(struct bnx2x *bp, u32 reg, u32 addr, u32 val)
+static int bnx2x_mdio45_read(struct bnx2x *bp, u32 phy_addr, u32 reg,
+ u32 addr, u32 *ret_val)
+{
+ u32 emac_base = bp->port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
+
+ return bnx2x_mdio45_ctrl_read(bp, emac_base, phy_addr,
+ reg, addr, ret_val);
+}
+
+static int bnx2x_mdio45_vwrite(struct bnx2x *bp, u32 phy_addr, u32 reg,
+ u32 addr, u32 val)
{
int i;
u32 rd_val;
might_sleep();
for (i = 0; i < 10; i++) {
- bnx2x_mdio45_write(bp, reg, addr, val);
+ bnx2x_mdio45_write(bp, phy_addr, reg, addr, val);
msleep(5);
- bnx2x_mdio45_read(bp, reg, addr, &rd_val);
+ bnx2x_mdio45_read(bp, phy_addr, reg, addr, &rd_val);
/* if the read value is not the same as the value we wrote,
we should write it again */
if (rd_val == val)
@@ -1476,10 +1646,73 @@ static int bnx2x_mdio45_vwrite(struct bnx2x *bp, u32 reg, u32 addr, u32 val)
* link management
*/
+static void bnx2x_pause_resolve(struct bnx2x *bp, u32 pause_result)
+{
+ switch (pause_result) { /* ASYM P ASYM P */
+ case 0xb: /* 1 0 1 1 */
+ bp->flow_ctrl = FLOW_CTRL_TX;
+ break;
+
+ case 0xe: /* 1 1 1 0 */
+ bp->flow_ctrl = FLOW_CTRL_RX;
+ break;
+
+ case 0x5: /* 0 1 0 1 */
+ case 0x7: /* 0 1 1 1 */
+ case 0xd: /* 1 1 0 1 */
+ case 0xf: /* 1 1 1 1 */
+ bp->flow_ctrl = FLOW_CTRL_BOTH;
+ break;
+
+ default:
+ break;
+ }
+}
+
+static u8 bnx2x_ext_phy_resove_fc(struct bnx2x *bp)
+{
+ u32 ext_phy_addr;
+ u32 ld_pause; /* local */
+ u32 lp_pause; /* link partner */
+ u32 an_complete; /* AN complete */
+ u32 pause_result;
+ u8 ret = 0;
+
+ ext_phy_addr = ((bp->ext_phy_config &
+ PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
+ PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+
+ /* read twice */
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_KR_AUTO_NEG_DEVAD,
+ EXT_PHY_KR_STATUS, &an_complete);
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_KR_AUTO_NEG_DEVAD,
+ EXT_PHY_KR_STATUS, &an_complete);
+
+ if (an_complete & EXT_PHY_KR_AUTO_NEG_COMPLETE) {
+ ret = 1;
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_KR_AUTO_NEG_DEVAD,
+ EXT_PHY_KR_AUTO_NEG_ADVERT, &ld_pause);
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_KR_AUTO_NEG_DEVAD,
+ EXT_PHY_KR_LP_AUTO_NEG, &lp_pause);
+ pause_result = (ld_pause &
+ EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_MASK) >> 8;
+ pause_result |= (lp_pause &
+ EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_MASK) >> 10;
+ DP(NETIF_MSG_LINK, "Ext PHY pause result 0x%x \n",
+ pause_result);
+ bnx2x_pause_resolve(bp, pause_result);
+ }
+ return ret;
+}
+
static void bnx2x_flow_ctrl_resolve(struct bnx2x *bp, u32 gp_status)
{
- u32 ld_pause; /* local driver */
- u32 lp_pause; /* link partner */
+ u32 ld_pause; /* local driver */
+ u32 lp_pause; /* link partner */
u32 pause_result;
bp->flow_ctrl = 0;
@@ -1501,45 +1734,57 @@ static void bnx2x_flow_ctrl_resolve(struct bnx2x *bp, u32 gp_status)
pause_result |= (lp_pause &
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK)>>7;
DP(NETIF_MSG_LINK, "pause_result 0x%x\n", pause_result);
+ bnx2x_pause_resolve(bp, pause_result);
+ } else if (!(bp->req_autoneg & AUTONEG_FLOW_CTRL) ||
+ !(bnx2x_ext_phy_resove_fc(bp))) {
+ /* forced speed */
+ if (bp->req_autoneg & AUTONEG_FLOW_CTRL) {
+ switch (bp->req_flow_ctrl) {
+ case FLOW_CTRL_AUTO:
+ if (bp->dev->mtu <= 4500)
+ bp->flow_ctrl = FLOW_CTRL_BOTH;
+ else
+ bp->flow_ctrl = FLOW_CTRL_TX;
+ break;
- switch (pause_result) { /* ASYM P ASYM P */
- case 0xb: /* 1 0 1 1 */
- bp->flow_ctrl = FLOW_CTRL_TX;
- break;
-
- case 0xe: /* 1 1 1 0 */
- bp->flow_ctrl = FLOW_CTRL_RX;
- break;
+ case FLOW_CTRL_TX:
+ bp->flow_ctrl = FLOW_CTRL_TX;
+ break;
- case 0x5: /* 0 1 0 1 */
- case 0x7: /* 0 1 1 1 */
- case 0xd: /* 1 1 0 1 */
- case 0xf: /* 1 1 1 1 */
- bp->flow_ctrl = FLOW_CTRL_BOTH;
- break;
+ case FLOW_CTRL_RX:
+ if (bp->dev->mtu <= 4500)
+ bp->flow_ctrl = FLOW_CTRL_RX;
+ break;
- default:
- break;
- }
+ case FLOW_CTRL_BOTH:
+ if (bp->dev->mtu <= 4500)
+ bp->flow_ctrl = FLOW_CTRL_BOTH;
+ else
+ bp->flow_ctrl = FLOW_CTRL_TX;
+ break;
- } else { /* forced mode */
- switch (bp->req_flow_ctrl) {
- case FLOW_CTRL_AUTO:
- if (bp->dev->mtu <= 4500)
- bp->flow_ctrl = FLOW_CTRL_BOTH;
- else
- bp->flow_ctrl = FLOW_CTRL_TX;
- break;
+ case FLOW_CTRL_NONE:
+ default:
+ break;
+ }
+ } else { /* forced mode */
+ switch (bp->req_flow_ctrl) {
+ case FLOW_CTRL_AUTO:
+ DP(NETIF_MSG_LINK, "req_flow_ctrl 0x%x while"
+ " req_autoneg 0x%x\n",
+ bp->req_flow_ctrl, bp->req_autoneg);
+ break;
- case FLOW_CTRL_TX:
- case FLOW_CTRL_RX:
- case FLOW_CTRL_BOTH:
- bp->flow_ctrl = bp->req_flow_ctrl;
- break;
+ case FLOW_CTRL_TX:
+ case FLOW_CTRL_RX:
+ case FLOW_CTRL_BOTH:
+ bp->flow_ctrl = bp->req_flow_ctrl;
+ break;
- case FLOW_CTRL_NONE:
- default:
- break;
+ case FLOW_CTRL_NONE:
+ default:
+ break;
+ }
}
}
DP(NETIF_MSG_LINK, "flow_ctrl 0x%x\n", bp->flow_ctrl);
@@ -1550,9 +1795,9 @@ static void bnx2x_link_settings_status(struct bnx2x *bp, u32 gp_status)
bp->link_status = 0;
if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS) {
- DP(NETIF_MSG_LINK, "link up\n");
+ DP(NETIF_MSG_LINK, "phy link up\n");
- bp->link_up = 1;
+ bp->phy_link_up = 1;
bp->link_status |= LINK_STATUS_LINK_UP;
if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_DUPLEX_STATUS)
@@ -1661,20 +1906,20 @@ static void bnx2x_link_settings_status(struct bnx2x *bp, u32 gp_status)
bp->link_status |= LINK_STATUS_RX_FLOW_CONTROL_ENABLED;
} else { /* link_down */
- DP(NETIF_MSG_LINK, "link down\n");
+ DP(NETIF_MSG_LINK, "phy link down\n");
- bp->link_up = 0;
+ bp->phy_link_up = 0;
bp->line_speed = 0;
bp->duplex = DUPLEX_FULL;
bp->flow_ctrl = 0;
}
- DP(NETIF_MSG_LINK, "gp_status 0x%x link_up %d\n"
+ DP(NETIF_MSG_LINK, "gp_status 0x%x phy_link_up %d\n"
DP_LEVEL " line_speed %d duplex %d flow_ctrl 0x%x"
" link_status 0x%x\n",
- gp_status, bp->link_up, bp->line_speed, bp->duplex, bp->flow_ctrl,
- bp->link_status);
+ gp_status, bp->phy_link_up, bp->line_speed, bp->duplex,
+ bp->flow_ctrl, bp->link_status);
}
static void bnx2x_link_int_ack(struct bnx2x *bp, int is_10g)
@@ -1684,38 +1929,38 @@ static void bnx2x_link_int_ack(struct bnx2x *bp, int is_10g)
/* first reset all status
* we assume only one line will be change at a time */
bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
- (NIG_XGXS0_LINK_STATUS |
- NIG_SERDES0_LINK_STATUS |
- NIG_STATUS_INTERRUPT_XGXS0_LINK10G));
- if (bp->link_up) {
+ (NIG_STATUS_XGXS0_LINK10G |
+ NIG_STATUS_XGXS0_LINK_STATUS |
+ NIG_STATUS_SERDES0_LINK_STATUS));
+ if (bp->phy_link_up) {
if (is_10g) {
/* Disable the 10G link interrupt
* by writing 1 to the status register
*/
- DP(NETIF_MSG_LINK, "10G XGXS link up\n");
+ DP(NETIF_MSG_LINK, "10G XGXS phy link up\n");
bnx2x_bits_en(bp,
NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
- NIG_STATUS_INTERRUPT_XGXS0_LINK10G);
+ NIG_STATUS_XGXS0_LINK10G);
} else if (bp->phy_flags & PHY_XGXS_FLAG) {
/* Disable the link interrupt
* by writing 1 to the relevant lane
* in the status register
*/
- DP(NETIF_MSG_LINK, "1G XGXS link up\n");
+ DP(NETIF_MSG_LINK, "1G XGXS phy link up\n");
bnx2x_bits_en(bp,
NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
((1 << bp->ser_lane) <<
- NIG_XGXS0_LINK_STATUS_SIZE));
+ NIG_STATUS_XGXS0_LINK_STATUS_SIZE));
} else { /* SerDes */
- DP(NETIF_MSG_LINK, "SerDes link up\n");
+ DP(NETIF_MSG_LINK, "SerDes phy link up\n");
/* Disable the link interrupt
* by writing 1 to the status register
*/
bnx2x_bits_en(bp,
NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
- NIG_SERDES0_LINK_STATUS);
+ NIG_STATUS_SERDES0_LINK_STATUS);
}
} else { /* link_down */
@@ -1726,91 +1971,182 @@ static int bnx2x_ext_phy_is_link_up(struct bnx2x *bp)
{
u32 ext_phy_type;
u32 ext_phy_addr;
- u32 local_phy;
- u32 val = 0;
+ u32 val1 = 0, val2;
u32 rx_sd, pcs_status;
if (bp->phy_flags & PHY_XGXS_FLAG) {
- local_phy = bp->phy_addr;
ext_phy_addr = ((bp->ext_phy_config &
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
- bp->phy_addr = (u8)ext_phy_addr;
ext_phy_type = XGXS_EXT_PHY_TYPE(bp);
switch (ext_phy_type) {
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
DP(NETIF_MSG_LINK, "XGXS Direct\n");
- val = 1;
+ val1 = 1;
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
DP(NETIF_MSG_LINK, "XGXS 8705\n");
- bnx2x_mdio45_read(bp, EXT_PHY_OPT_WIS_DEVAD,
- EXT_PHY_OPT_LASI_STATUS, &val);
- DP(NETIF_MSG_LINK, "8705 LASI status is %d\n", val);
-
- bnx2x_mdio45_read(bp, EXT_PHY_OPT_WIS_DEVAD,
- EXT_PHY_OPT_LASI_STATUS, &val);
- DP(NETIF_MSG_LINK, "8705 LASI status is %d\n", val);
-
- bnx2x_mdio45_read(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_OPT_WIS_DEVAD,
+ EXT_PHY_OPT_LASI_STATUS, &val1);
+ DP(NETIF_MSG_LINK, "8705 LASI status 0x%x\n", val1);
+
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_OPT_WIS_DEVAD,
+ EXT_PHY_OPT_LASI_STATUS, &val1);
+ DP(NETIF_MSG_LINK, "8705 LASI status 0x%x\n", val1);
+
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
EXT_PHY_OPT_PMD_RX_SD, &rx_sd);
- val = (rx_sd & 0x1);
+ DP(NETIF_MSG_LINK, "8705 rx_sd 0x%x\n", rx_sd);
+ val1 = (rx_sd & 0x1);
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
DP(NETIF_MSG_LINK, "XGXS 8706\n");
- bnx2x_mdio45_read(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_OPT_LASI_STATUS, &val);
- DP(NETIF_MSG_LINK, "8706 LASI status is %d\n", val);
-
- bnx2x_mdio45_read(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_OPT_LASI_STATUS, &val);
- DP(NETIF_MSG_LINK, "8706 LASI status is %d\n", val);
-
- bnx2x_mdio45_read(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ EXT_PHY_OPT_LASI_STATUS, &val1);
+ DP(NETIF_MSG_LINK, "8706 LASI status 0x%x\n", val1);
+
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ EXT_PHY_OPT_LASI_STATUS, &val1);
+ DP(NETIF_MSG_LINK, "8706 LASI status 0x%x\n", val1);
+
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
EXT_PHY_OPT_PMD_RX_SD, &rx_sd);
- bnx2x_mdio45_read(bp, EXT_PHY_OPT_PCS_DEVAD,
- EXT_PHY_OPT_PCS_STATUS, &pcs_status);
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_OPT_PCS_DEVAD,
+ EXT_PHY_OPT_PCS_STATUS, &pcs_status);
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_AUTO_NEG_DEVAD,
+ EXT_PHY_OPT_AN_LINK_STATUS, &val2);
+
DP(NETIF_MSG_LINK, "8706 rx_sd 0x%x"
- " pcs_status 0x%x\n", rx_sd, pcs_status);
- /* link is up if both bit 0 of pmd_rx and
- * bit 0 of pcs_status are set
+ " pcs_status 0x%x 1Gbps link_status 0x%x 0x%x\n",
+ rx_sd, pcs_status, val2, (val2 & (1<<1)));
+ /* link is up if both bit 0 of pmd_rx_sd and
+ * bit 0 of pcs_status are set, or if the autoneg bit
+ 1 is set
+ */
+ val1 = ((rx_sd & pcs_status & 0x1) || (val2 & (1<<1)));
+ break;
+
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
+ bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO);
+
+ /* clear the interrupt LASI status register */
+ bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_KR_PCS_DEVAD,
+ EXT_PHY_KR_LASI_STATUS, &val2);
+ bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_KR_PCS_DEVAD,
+ EXT_PHY_KR_LASI_STATUS, &val1);
+ DP(NETIF_MSG_LINK, "KR LASI status 0x%x->0x%x\n",
+ val2, val1);
+ /* Check the LASI */
+ bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_KR_PMA_PMD_DEVAD,
+ 0x9003, &val2);
+ bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_KR_PMA_PMD_DEVAD,
+ 0x9003, &val1);
+ DP(NETIF_MSG_LINK, "KR 0x9003 0x%x->0x%x\n",
+ val2, val1);
+ /* Check the link status */
+ bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_KR_PCS_DEVAD,
+ EXT_PHY_KR_PCS_STATUS, &val2);
+ DP(NETIF_MSG_LINK, "KR PCS status 0x%x\n", val2);
+ /* Check the link status on 1.1.2 */
+ bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ EXT_PHY_KR_STATUS, &val2);
+ bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ EXT_PHY_KR_STATUS, &val1);
+ DP(NETIF_MSG_LINK,
+ "KR PMA status 0x%x->0x%x\n", val2, val1);
+ val1 = ((val1 & 4) == 4);
+ /* If 1G was requested assume the link is up */
+ if (!(bp->req_autoneg & AUTONEG_SPEED) &&
+ (bp->req_line_speed == SPEED_1000))
+ val1 = 1;
+ bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_8072_MDIO);
+ break;
+
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ EXT_PHY_OPT_LASI_STATUS, &val2);
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ EXT_PHY_OPT_LASI_STATUS, &val1);
+ DP(NETIF_MSG_LINK,
+ "10G-base-T LASI status 0x%x->0x%x\n", val2, val1);
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ EXT_PHY_KR_STATUS, &val2);
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ EXT_PHY_KR_STATUS, &val1);
+ DP(NETIF_MSG_LINK,
+ "10G-base-T PMA status 0x%x->0x%x\n", val2, val1);
+ val1 = ((val1 & 4) == 4);
+ /* if link is up
+ * print the AN outcome of the SFX7101 PHY
*/
- val = (rx_sd & pcs_status);
+ if (val1) {
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_KR_AUTO_NEG_DEVAD,
+ 0x21, &val2);
+ DP(NETIF_MSG_LINK,
+ "SFX7101 AN status 0x%x->%s\n", val2,
+ (val2 & (1<<14)) ? "Master" : "Slave");
+ }
break;
default:
DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n",
bp->ext_phy_config);
- val = 0;
+ val1 = 0;
break;
}
- bp->phy_addr = local_phy;
} else { /* SerDes */
ext_phy_type = SERDES_EXT_PHY_TYPE(bp);
switch (ext_phy_type) {
case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT:
DP(NETIF_MSG_LINK, "SerDes Direct\n");
- val = 1;
+ val1 = 1;
break;
case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482:
DP(NETIF_MSG_LINK, "SerDes 5482\n");
- val = 1;
+ val1 = 1;
break;
default:
DP(NETIF_MSG_LINK, "BAD SerDes ext_phy_config 0x%x\n",
bp->ext_phy_config);
- val = 0;
+ val1 = 0;
break;
}
}
- return val;
+ return val1;
}
static void bnx2x_bmac_enable(struct bnx2x *bp, int is_lb)
@@ -1935,6 +2271,35 @@ static void bnx2x_bmac_enable(struct bnx2x *bp, int is_lb)
bp->stats_state = STATS_STATE_ENABLE;
}
+static void bnx2x_bmac_rx_disable(struct bnx2x *bp)
+{
+ int port = bp->port;
+ u32 bmac_addr = port ? NIG_REG_INGRESS_BMAC1_MEM :
+ NIG_REG_INGRESS_BMAC0_MEM;
+ u32 wb_write[2];
+
+ /* Only if the bmac is out of reset */
+ if (REG_RD(bp, MISC_REG_RESET_REG_2) &
+ (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)) {
+ /* Clear Rx Enable bit in BMAC_CONTROL register */
+#ifdef BNX2X_DMAE_RD
+ bnx2x_read_dmae(bp, bmac_addr +
+ BIGMAC_REGISTER_BMAC_CONTROL, 2);
+ wb_write[0] = *bnx2x_sp(bp, wb_data[0]);
+ wb_write[1] = *bnx2x_sp(bp, wb_data[1]);
+#else
+ wb_write[0] = REG_RD(bp,
+ bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL);
+ wb_write[1] = REG_RD(bp,
+ bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL + 4);
+#endif
+ wb_write[0] &= ~BMAC_CONTROL_RX_ENABLE;
+ REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL,
+ wb_write, 2);
+ msleep(1);
+ }
+}
+
static void bnx2x_emac_enable(struct bnx2x *bp)
{
int port = bp->port;
@@ -2233,7 +2598,7 @@ static void bnx2x_pbf_update(struct bnx2x *bp)
static void bnx2x_update_mng(struct bnx2x *bp)
{
if (!nomcp)
- SHMEM_WR(bp, drv_fw_mb[bp->port].link_status,
+ SHMEM_WR(bp, port_mb[bp->port].link_status,
bp->link_status);
}
@@ -2295,19 +2660,19 @@ static void bnx2x_link_down(struct bnx2x *bp)
DP(BNX2X_MSG_STATS, "stats_state - STOP\n");
}
- /* indicate link down */
+ /* indicate no mac active */
bp->phy_flags &= ~(PHY_BMAC_FLAG | PHY_EMAC_FLAG);
- /* reset BigMac */
- REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
- (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
+ /* update shared memory */
+ bnx2x_update_mng(bp);
- /* ignore drain flag interrupt */
/* activate nig drain */
NIG_WR(NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1);
- /* update shared memory */
- bnx2x_update_mng(bp);
+ /* reset BigMac */
+ bnx2x_bmac_rx_disable(bp);
+ REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
+ (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
/* indicate link down */
bnx2x_link_report(bp);
@@ -2318,14 +2683,15 @@ static void bnx2x_init_mac_stats(struct bnx2x *bp);
/* This function is called upon link interrupt */
static void bnx2x_link_update(struct bnx2x *bp)
{
- u32 gp_status;
int port = bp->port;
int i;
+ u32 gp_status;
int link_10g;
- DP(NETIF_MSG_LINK, "port %x, is xgxs %x, stat_mask 0x%x,"
+ DP(NETIF_MSG_LINK, "port %x, %s, int_status 0x%x,"
" int_mask 0x%x, saved_mask 0x%x, MI_INT %x, SERDES_LINK %x,"
- " 10G %x, XGXS_LINK %x\n", port, (bp->phy_flags & PHY_XGXS_FLAG),
+ " 10G %x, XGXS_LINK %x\n", port,
+ (bp->phy_flags & PHY_XGXS_FLAG)? "XGXS":"SerDes",
REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4),
REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4), bp->nig_mask,
REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port*0x18),
@@ -2337,7 +2703,7 @@ static void bnx2x_link_update(struct bnx2x *bp)
might_sleep();
MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_GP_STATUS);
/* avoid fast toggling */
- for (i = 0 ; i < 10 ; i++) {
+ for (i = 0; i < 10; i++) {
msleep(10);
bnx2x_mdio22_read(bp, MDIO_GP_STATUS_TOP_AN_STATUS1,
&gp_status);
@@ -2352,7 +2718,8 @@ static void bnx2x_link_update(struct bnx2x *bp)
bnx2x_link_int_ack(bp, link_10g);
/* link is up only if both local phy and external phy are up */
- if (bp->link_up && bnx2x_ext_phy_is_link_up(bp)) {
+ bp->link_up = (bp->phy_link_up && bnx2x_ext_phy_is_link_up(bp));
+ if (bp->link_up) {
if (link_10g) {
bnx2x_bmac_enable(bp, 0);
bnx2x_leds_set(bp, SPEED_10000);
@@ -2428,7 +2795,9 @@ static void bnx2x_reset_unicore(struct bnx2x *bp)
}
}
- BNX2X_ERR("BUG! unicore is still in reset!\n");
+ BNX2X_ERR("BUG! %s (0x%x) is still in reset!\n",
+ (bp->phy_flags & PHY_XGXS_FLAG)? "XGXS":"SerDes",
+ bp->phy_addr);
}
static void bnx2x_set_swap_lanes(struct bnx2x *bp)
@@ -2476,12 +2845,12 @@ static void bnx2x_set_parallel_detection(struct bnx2x *bp)
MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_10G_PARALLEL_DETECT);
bnx2x_mdio22_write(bp,
- MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK,
+ MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK,
MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK_CNT);
bnx2x_mdio22_read(bp,
- MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL,
- &control2);
+ MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL,
+ &control2);
if (bp->autoneg & AUTONEG_PARALLEL) {
control2 |=
@@ -2491,8 +2860,14 @@ static void bnx2x_set_parallel_detection(struct bnx2x *bp)
~MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN;
}
bnx2x_mdio22_write(bp,
- MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL,
- control2);
+ MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL,
+ control2);
+
+ /* Disable parallel detection of HiG */
+ MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_XGXS_BLOCK2);
+ bnx2x_mdio22_write(bp, MDIO_XGXS_BLOCK2_UNICORE_MODE_10G,
+ MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_CX4_XGXS |
+ MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_HIGIG_XGXS);
}
}
@@ -2626,7 +3001,7 @@ static void bnx2x_set_brcm_cl37_advertisment(struct bnx2x *bp)
MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_OVER_1G);
/* set extended capabilities */
- if (bp->advertising & ADVERTISED_2500baseT_Full)
+ if (bp->advertising & ADVERTISED_2500baseX_Full)
val |= MDIO_OVER_1G_UP1_2_5G;
if (bp->advertising & ADVERTISED_10000baseT_Full)
val |= MDIO_OVER_1G_UP1_10G;
@@ -2642,20 +3017,91 @@ static void bnx2x_set_ieee_aneg_advertisment(struct bnx2x *bp)
/* for AN, we are always publishing full duplex */
an_adv = MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX;
- /* set pause */
- switch (bp->pause_mode) {
- case PAUSE_SYMMETRIC:
- an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC;
- break;
- case PAUSE_ASYMMETRIC:
- an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
- break;
- case PAUSE_BOTH:
- an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
- break;
- case PAUSE_NONE:
- an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
- break;
+ /* resolve pause mode and advertisement
+ * Please refer to Table 28B-3 of the 802.3ab-1999 spec */
+ if (bp->req_autoneg & AUTONEG_FLOW_CTRL) {
+ switch (bp->req_flow_ctrl) {
+ case FLOW_CTRL_AUTO:
+ if (bp->dev->mtu <= 4500) {
+ an_adv |=
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
+ bp->advertising |= (ADVERTISED_Pause |
+ ADVERTISED_Asym_Pause);
+ } else {
+ an_adv |=
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
+ bp->advertising |= ADVERTISED_Asym_Pause;
+ }
+ break;
+
+ case FLOW_CTRL_TX:
+ an_adv |=
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
+ bp->advertising |= ADVERTISED_Asym_Pause;
+ break;
+
+ case FLOW_CTRL_RX:
+ if (bp->dev->mtu <= 4500) {
+ an_adv |=
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
+ bp->advertising |= (ADVERTISED_Pause |
+ ADVERTISED_Asym_Pause);
+ } else {
+ an_adv |=
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
+ bp->advertising &= ~(ADVERTISED_Pause |
+ ADVERTISED_Asym_Pause);
+ }
+ break;
+
+ case FLOW_CTRL_BOTH:
+ if (bp->dev->mtu <= 4500) {
+ an_adv |=
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
+ bp->advertising |= (ADVERTISED_Pause |
+ ADVERTISED_Asym_Pause);
+ } else {
+ an_adv |=
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
+ bp->advertising |= ADVERTISED_Asym_Pause;
+ }
+ break;
+
+ case FLOW_CTRL_NONE:
+ default:
+ an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
+ bp->advertising &= ~(ADVERTISED_Pause |
+ ADVERTISED_Asym_Pause);
+ break;
+ }
+ } else { /* forced mode */
+ switch (bp->req_flow_ctrl) {
+ case FLOW_CTRL_AUTO:
+ DP(NETIF_MSG_LINK, "req_flow_ctrl 0x%x while"
+ " req_autoneg 0x%x\n",
+ bp->req_flow_ctrl, bp->req_autoneg);
+ break;
+
+ case FLOW_CTRL_TX:
+ an_adv |=
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
+ bp->advertising |= ADVERTISED_Asym_Pause;
+ break;
+
+ case FLOW_CTRL_RX:
+ case FLOW_CTRL_BOTH:
+ an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
+ bp->advertising |= (ADVERTISED_Pause |
+ ADVERTISED_Asym_Pause);
+ break;
+
+ case FLOW_CTRL_NONE:
+ default:
+ an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
+ bp->advertising &= ~(ADVERTISED_Pause |
+ ADVERTISED_Asym_Pause);
+ break;
+ }
}
MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_COMBO_IEEE0);
@@ -2753,47 +3199,162 @@ static void bnx2x_initialize_sgmii_process(struct bnx2x *bp)
static void bnx2x_link_int_enable(struct bnx2x *bp)
{
int port = bp->port;
+ u32 ext_phy_type;
+ u32 mask;
/* setting the status to report on link up
for either XGXS or SerDes */
bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
- (NIG_XGXS0_LINK_STATUS |
- NIG_STATUS_INTERRUPT_XGXS0_LINK10G |
- NIG_SERDES0_LINK_STATUS));
+ (NIG_STATUS_XGXS0_LINK10G |
+ NIG_STATUS_XGXS0_LINK_STATUS |
+ NIG_STATUS_SERDES0_LINK_STATUS));
if (bp->phy_flags & PHY_XGXS_FLAG) {
- /* TBD -
- * in force mode (not AN) we can enable just the relevant
- * interrupt
- * Even in AN we might enable only one according to the AN
- * speed mask
- */
- bnx2x_bits_en(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
- (NIG_MASK_XGXS0_LINK_STATUS |
- NIG_MASK_XGXS0_LINK10G));
- DP(NETIF_MSG_LINK, "enable XGXS interrupt\n");
+ mask = (NIG_MASK_XGXS0_LINK10G |
+ NIG_MASK_XGXS0_LINK_STATUS);
+ DP(NETIF_MSG_LINK, "enabled XGXS interrupt\n");
+ ext_phy_type = XGXS_EXT_PHY_TYPE(bp);
+ if ((ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) &&
+ (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) &&
+ (ext_phy_type !=
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN)) {
+ mask |= NIG_MASK_MI_INT;
+ DP(NETIF_MSG_LINK, "enabled external phy int\n");
+ }
} else { /* SerDes */
- bnx2x_bits_en(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
- NIG_MASK_SERDES0_LINK_STATUS);
- DP(NETIF_MSG_LINK, "enable SerDes interrupt\n");
+ mask = NIG_MASK_SERDES0_LINK_STATUS;
+ DP(NETIF_MSG_LINK, "enabled SerDes interrupt\n");
+ ext_phy_type = SERDES_EXT_PHY_TYPE(bp);
+ if ((ext_phy_type !=
+ PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT) &&
+ (ext_phy_type !=
+ PORT_HW_CFG_SERDES_EXT_PHY_TYPE_NOT_CONN)) {
+ mask |= NIG_MASK_MI_INT;
+ DP(NETIF_MSG_LINK, "enabled external phy int\n");
+ }
}
+ bnx2x_bits_en(bp,
+ NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
+ mask);
+ DP(NETIF_MSG_LINK, "port %x, %s, int_status 0x%x,"
+ " int_mask 0x%x, MI_INT %x, SERDES_LINK %x,"
+ " 10G %x, XGXS_LINK %x\n", port,
+ (bp->phy_flags & PHY_XGXS_FLAG)? "XGXS":"SerDes",
+ REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4),
+ REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4),
+ REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port*0x18),
+ REG_RD(bp, NIG_REG_SERDES0_STATUS_LINK_STATUS + port*0x3c),
+ REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK10G + port*0x68),
+ REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68)
+ );
+}
+
+static void bnx2x_bcm8072_external_rom_boot(struct bnx2x *bp)
+{
+ u32 ext_phy_addr = ((bp->ext_phy_config &
+ PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
+ PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+ u32 fw_ver1, fw_ver2;
+
+ /* Need to wait 200ms after reset */
+ msleep(200);
+ /* Boot port from external ROM
+ * Set ser_boot_ctl bit in the MISC_CTRL1 register
+ */
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
+ EXT_PHY_KR_PMA_PMD_DEVAD,
+ EXT_PHY_KR_MISC_CTRL1, 0x0001);
+
+ /* Reset internal microprocessor */
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
+ EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_GEN_CTRL,
+ EXT_PHY_KR_ROM_RESET_INTERNAL_MP);
+ /* set micro reset = 0 */
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
+ EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_GEN_CTRL,
+ EXT_PHY_KR_ROM_MICRO_RESET);
+ /* Reset internal microprocessor */
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
+ EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_GEN_CTRL,
+ EXT_PHY_KR_ROM_RESET_INTERNAL_MP);
+ /* wait for 100ms for code download via SPI port */
+ msleep(100);
+
+ /* Clear ser_boot_ctl bit */
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
+ EXT_PHY_KR_PMA_PMD_DEVAD,
+ EXT_PHY_KR_MISC_CTRL1, 0x0000);
+ /* Wait 100ms */
+ msleep(100);
+
+ /* Print the PHY FW version */
+ bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, ext_phy_addr,
+ EXT_PHY_KR_PMA_PMD_DEVAD,
+ 0xca19, &fw_ver1);
+ bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, ext_phy_addr,
+ EXT_PHY_KR_PMA_PMD_DEVAD,
+ 0xca1a, &fw_ver2);
+ DP(NETIF_MSG_LINK,
+ "8072 FW version 0x%x:0x%x\n", fw_ver1, fw_ver2);
+}
+
+static void bnx2x_bcm8072_force_10G(struct bnx2x *bp)
+{
+ u32 ext_phy_addr = ((bp->ext_phy_config &
+ PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
+ PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+
+ /* Force KR or KX */
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
+ EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_CTRL,
+ 0x2040);
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
+ EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_CTRL2,
+ 0x000b);
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
+ EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_PMD_CTRL,
+ 0x0000);
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
+ EXT_PHY_KR_AUTO_NEG_DEVAD, EXT_PHY_KR_CTRL,
+ 0x0000);
}
static void bnx2x_ext_phy_init(struct bnx2x *bp)
{
- int port = bp->port;
u32 ext_phy_type;
u32 ext_phy_addr;
- u32 local_phy;
+ u32 cnt;
+ u32 ctrl;
+ u32 val = 0;
if (bp->phy_flags & PHY_XGXS_FLAG) {
- local_phy = bp->phy_addr;
ext_phy_addr = ((bp->ext_phy_config &
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
ext_phy_type = XGXS_EXT_PHY_TYPE(bp);
+ /* Make sure that the soft reset is off (expect for the 8072:
+ * due to the lock, it will be done inside the specific
+ * handling)
+ */
+ if ((ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) &&
+ (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) &&
+ (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN) &&
+ (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072)) {
+ /* Wait for soft reset to get cleared upto 1 sec */
+ for (cnt = 0; cnt < 1000; cnt++) {
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ EXT_PHY_OPT_CNTL, &ctrl);
+ if (!(ctrl & (1<<15)))
+ break;
+ msleep(1);
+ }
+ DP(NETIF_MSG_LINK,
+ "control reg 0x%x (after %d ms)\n", ctrl, cnt);
+ }
+
switch (ext_phy_type) {
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
DP(NETIF_MSG_LINK, "XGXS Direct\n");
@@ -2801,49 +3362,235 @@ static void bnx2x_ext_phy_init(struct bnx2x *bp)
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
DP(NETIF_MSG_LINK, "XGXS 8705\n");
- bnx2x_bits_en(bp,
- NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
- NIG_MASK_MI_INT);
- DP(NETIF_MSG_LINK, "enabled external phy int\n");
- bp->phy_addr = ext_phy_type;
- bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
EXT_PHY_OPT_PMD_MISC_CNTL,
0x8288);
- bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
EXT_PHY_OPT_PHY_IDENTIFIER,
0x7fbf);
- bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
EXT_PHY_OPT_CMU_PLL_BYPASS,
0x0100);
- bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_WIS_DEVAD,
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_OPT_WIS_DEVAD,
EXT_PHY_OPT_LASI_CNTL, 0x1);
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
DP(NETIF_MSG_LINK, "XGXS 8706\n");
- bnx2x_bits_en(bp,
- NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
- NIG_MASK_MI_INT);
- DP(NETIF_MSG_LINK, "enabled external phy int\n");
- bp->phy_addr = ext_phy_type;
- bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_OPT_PMD_DIGITAL_CNT,
- 0x400);
- bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
+ if (!(bp->req_autoneg & AUTONEG_SPEED)) {
+ /* Force speed */
+ if (bp->req_line_speed == SPEED_10000) {
+ DP(NETIF_MSG_LINK,
+ "XGXS 8706 force 10Gbps\n");
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ EXT_PHY_OPT_PMD_DIGITAL_CNT,
+ 0x400);
+ } else {
+ /* Force 1Gbps */
+ DP(NETIF_MSG_LINK,
+ "XGXS 8706 force 1Gbps\n");
+
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ EXT_PHY_OPT_CNTL,
+ 0x0040);
+
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ EXT_PHY_OPT_CNTL2,
+ 0x000D);
+ }
+
+ /* Enable LASI */
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ EXT_PHY_OPT_LASI_CNTL,
+ 0x1);
+ } else {
+ /* AUTONEG */
+ /* Allow CL37 through CL73 */
+ DP(NETIF_MSG_LINK, "XGXS 8706 AutoNeg\n");
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_AUTO_NEG_DEVAD,
+ EXT_PHY_OPT_AN_CL37_CL73,
+ 0x040c);
+
+ /* Enable Full-Duplex advertisment on CL37 */
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_AUTO_NEG_DEVAD,
+ EXT_PHY_OPT_AN_CL37_FD,
+ 0x0020);
+ /* Enable CL37 AN */
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_AUTO_NEG_DEVAD,
+ EXT_PHY_OPT_AN_CL37_AN,
+ 0x1000);
+ /* Advertise 10G/1G support */
+ if (bp->advertising &
+ ADVERTISED_1000baseT_Full)
+ val = (1<<5);
+ if (bp->advertising &
+ ADVERTISED_10000baseT_Full)
+ val |= (1<<7);
+
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_AUTO_NEG_DEVAD,
+ EXT_PHY_OPT_AN_ADV, val);
+ /* Enable LASI */
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ EXT_PHY_OPT_LASI_CNTL,
+ 0x1);
+
+ /* Enable clause 73 AN */
+ bnx2x_mdio45_write(bp, ext_phy_addr,
+ EXT_PHY_AUTO_NEG_DEVAD,
+ EXT_PHY_OPT_CNTL,
+ 0x1200);
+ }
+ break;
+
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
+ bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO);
+ /* Wait for soft reset to get cleared upto 1 sec */
+ for (cnt = 0; cnt < 1000; cnt++) {
+ bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ EXT_PHY_OPT_CNTL, &ctrl);
+ if (!(ctrl & (1<<15)))
+ break;
+ msleep(1);
+ }
+ DP(NETIF_MSG_LINK,
+ "8072 control reg 0x%x (after %d ms)\n",
+ ctrl, cnt);
+
+ bnx2x_bcm8072_external_rom_boot(bp);
+ DP(NETIF_MSG_LINK, "Finshed loading 8072 KR ROM\n");
+
+ /* enable LASI */
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_KR_PMA_PMD_DEVAD,
+ 0x9000, 0x0400);
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_KR_PMA_PMD_DEVAD,
+ EXT_PHY_KR_LASI_CNTL, 0x0004);
+
+ /* If this is forced speed, set to KR or KX
+ * (all other are not supported)
+ */
+ if (!(bp->req_autoneg & AUTONEG_SPEED)) {
+ if (bp->req_line_speed == SPEED_10000) {
+ bnx2x_bcm8072_force_10G(bp);
+ DP(NETIF_MSG_LINK,
+ "Forced speed 10G on 8072\n");
+ /* unlock */
+ bnx2x_hw_unlock(bp,
+ HW_LOCK_RESOURCE_8072_MDIO);
+ break;
+ } else
+ val = (1<<5);
+ } else {
+
+ /* Advertise 10G/1G support */
+ if (bp->advertising &
+ ADVERTISED_1000baseT_Full)
+ val = (1<<5);
+ if (bp->advertising &
+ ADVERTISED_10000baseT_Full)
+ val |= (1<<7);
+ }
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_KR_AUTO_NEG_DEVAD,
+ 0x11, val);
+ /* Add support for CL37 ( passive mode ) I */
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_KR_AUTO_NEG_DEVAD,
+ 0x8370, 0x040c);
+ /* Add support for CL37 ( passive mode ) II */
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_KR_AUTO_NEG_DEVAD,
+ 0xffe4, 0x20);
+ /* Add support for CL37 ( passive mode ) III */
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_KR_AUTO_NEG_DEVAD,
+ 0xffe0, 0x1000);
+ /* Restart autoneg */
+ msleep(500);
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_KR_AUTO_NEG_DEVAD,
+ EXT_PHY_KR_CTRL, 0x1200);
+ DP(NETIF_MSG_LINK, "8072 Autoneg Restart: "
+ "1G %ssupported 10G %ssupported\n",
+ (val & (1<<5)) ? "" : "not ",
+ (val & (1<<7)) ? "" : "not ");
+
+ /* unlock */
+ bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_8072_MDIO);
+ break;
+
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
+ DP(NETIF_MSG_LINK,
+ "Setting the SFX7101 LASI indication\n");
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
EXT_PHY_OPT_LASI_CNTL, 0x1);
+ DP(NETIF_MSG_LINK,
+ "Setting the SFX7101 LED to blink on traffic\n");
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ 0xC007, (1<<3));
+
+ /* read modify write pause advertizing */
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_KR_AUTO_NEG_DEVAD,
+ EXT_PHY_KR_AUTO_NEG_ADVERT, &val);
+ val &= ~EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_BOTH;
+ /* Please refer to Table 28B-3 of 802.3ab-1999 spec. */
+ if (bp->advertising & ADVERTISED_Pause)
+ val |= EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE;
+
+ if (bp->advertising & ADVERTISED_Asym_Pause) {
+ val |=
+ EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_ASYMMETRIC;
+ }
+ DP(NETIF_MSG_LINK, "SFX7101 AN advertize 0x%x\n", val);
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_KR_AUTO_NEG_DEVAD,
+ EXT_PHY_KR_AUTO_NEG_ADVERT, val);
+ /* Restart autoneg */
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_KR_AUTO_NEG_DEVAD,
+ EXT_PHY_KR_CTRL, &val);
+ val |= 0x200;
+ bnx2x_mdio45_write(bp, ext_phy_addr,
+ EXT_PHY_KR_AUTO_NEG_DEVAD,
+ EXT_PHY_KR_CTRL, val);
break;
default:
- DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n",
- bp->ext_phy_config);
+ BNX2X_ERR("BAD XGXS ext_phy_config 0x%x\n",
+ bp->ext_phy_config);
break;
}
- bp->phy_addr = local_phy;
} else { /* SerDes */
-/* ext_phy_addr = ((bp->ext_phy_config &
+/* ext_phy_addr = ((bp->ext_phy_config &
PORT_HW_CFG_SERDES_EXT_PHY_ADDR_MASK) >>
PORT_HW_CFG_SERDES_EXT_PHY_ADDR_SHIFT);
*/
@@ -2855,10 +3602,6 @@ static void bnx2x_ext_phy_init(struct bnx2x *bp)
case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482:
DP(NETIF_MSG_LINK, "SerDes 5482\n");
- bnx2x_bits_en(bp,
- NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
- NIG_MASK_MI_INT);
- DP(NETIF_MSG_LINK, "enabled external phy int\n");
break;
default:
@@ -2872,8 +3615,22 @@ static void bnx2x_ext_phy_init(struct bnx2x *bp)
static void bnx2x_ext_phy_reset(struct bnx2x *bp)
{
u32 ext_phy_type;
- u32 ext_phy_addr;
- u32 local_phy;
+ u32 ext_phy_addr = ((bp->ext_phy_config &
+ PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
+ PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+ u32 board = (bp->board & SHARED_HW_CFG_BOARD_TYPE_MASK);
+
+ /* The PHY reset is controled by GPIO 1
+ * Give it 1ms of reset pulse
+ */
+ if ((board != SHARED_HW_CFG_BOARD_TYPE_BCM957710T1002G) &&
+ (board != SHARED_HW_CFG_BOARD_TYPE_BCM957710T1003G)) {
+ bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
+ MISC_REGISTERS_GPIO_OUTPUT_LOW);
+ msleep(1);
+ bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
+ MISC_REGISTERS_GPIO_OUTPUT_HIGH);
+ }
if (bp->phy_flags & PHY_XGXS_FLAG) {
ext_phy_type = XGXS_EXT_PHY_TYPE(bp);
@@ -2884,15 +3641,24 @@ static void bnx2x_ext_phy_reset(struct bnx2x *bp)
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
- DP(NETIF_MSG_LINK, "XGXS 8705/6\n");
- local_phy = bp->phy_addr;
- ext_phy_addr = ((bp->ext_phy_config &
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
- bp->phy_addr = (u8)ext_phy_addr;
- bnx2x_mdio45_write(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
+ DP(NETIF_MSG_LINK, "XGXS 8705/8706\n");
+ bnx2x_mdio45_write(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
EXT_PHY_OPT_CNTL, 0xa040);
- bp->phy_addr = local_phy;
+ break;
+
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
+ DP(NETIF_MSG_LINK, "XGXS 8072\n");
+ bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO);
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_KR_PMA_PMD_DEVAD,
+ 0, 1<<15);
+ bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_8072_MDIO);
+ break;
+
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
+ DP(NETIF_MSG_LINK, "XGXS SFX7101\n");
break;
default:
@@ -2931,6 +3697,7 @@ static void bnx2x_link_initialize(struct bnx2x *bp)
NIG_MASK_SERDES0_LINK_STATUS |
NIG_MASK_MI_INT));
+ /* Activate the external PHY */
bnx2x_ext_phy_reset(bp);
bnx2x_set_aer_mmd(bp);
@@ -3011,11 +3778,11 @@ static void bnx2x_link_initialize(struct bnx2x *bp)
bnx2x_initialize_sgmii_process(bp);
}
- /* enable the interrupt */
- bnx2x_link_int_enable(bp);
-
/* init ext phy and enable link state int */
bnx2x_ext_phy_init(bp);
+
+ /* enable the interrupt */
+ bnx2x_link_int_enable(bp);
}
static void bnx2x_phy_deassert(struct bnx2x *bp)
@@ -3074,6 +3841,11 @@ static int bnx2x_phy_init(struct bnx2x *bp)
static void bnx2x_link_reset(struct bnx2x *bp)
{
int port = bp->port;
+ u32 board = (bp->board & SHARED_HW_CFG_BOARD_TYPE_MASK);
+
+ /* update shared memory */
+ bp->link_status = 0;
+ bnx2x_update_mng(bp);
/* disable attentions */
bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
@@ -3082,21 +3854,45 @@ static void bnx2x_link_reset(struct bnx2x *bp)
NIG_MASK_SERDES0_LINK_STATUS |
NIG_MASK_MI_INT));
- bnx2x_ext_phy_reset(bp);
+ /* activate nig drain */
+ NIG_WR(NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1);
+
+ /* disable nig egress interface */
+ NIG_WR(NIG_REG_BMAC0_OUT_EN + port*4, 0);
+ NIG_WR(NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0);
+
+ /* Stop BigMac rx */
+ bnx2x_bmac_rx_disable(bp);
+
+ /* disable emac */
+ NIG_WR(NIG_REG_NIG_EMAC0_EN + port*4, 0);
+
+ msleep(10);
+
+ /* The PHY reset is controled by GPIO 1
+ * Hold it as output low
+ */
+ if ((board != SHARED_HW_CFG_BOARD_TYPE_BCM957710T1002G) &&
+ (board != SHARED_HW_CFG_BOARD_TYPE_BCM957710T1003G)) {
+ bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
+ MISC_REGISTERS_GPIO_OUTPUT_LOW);
+ DP(NETIF_MSG_LINK, "reset external PHY\n");
+ }
/* reset the SerDes/XGXS */
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR,
(0x1ff << (port*16)));
- /* reset EMAC / BMAC and disable NIG interfaces */
- NIG_WR(NIG_REG_BMAC0_IN_EN + port*4, 0);
- NIG_WR(NIG_REG_BMAC0_OUT_EN + port*4, 0);
+ /* reset BigMac */
+ REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
+ (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
- NIG_WR(NIG_REG_NIG_EMAC0_EN + port*4, 0);
+ /* disable nig ingress interface */
+ NIG_WR(NIG_REG_BMAC0_IN_EN + port*4, 0);
NIG_WR(NIG_REG_EMAC0_IN_EN + port*4, 0);
- NIG_WR(NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0);
- NIG_WR(NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1);
+ /* set link down */
+ bp->link_up = 0;
}
#ifdef BNX2X_XGXS_LB
@@ -3177,6 +3973,7 @@ static int bnx2x_sp_post(struct bnx2x *bp, int command, int cid,
bnx2x_panic();
return -EBUSY;
}
+
/* CID needs port number to be encoded int it */
bp->spq_prod_bd->hdr.conn_and_cmd_data =
cpu_to_le32(((command << SPE_HDR_CMD_ID_SHIFT) |
@@ -4335,7 +5132,7 @@ static void bnx2x_timer(unsigned long data)
return;
if (atomic_read(&bp->intr_sem) != 0)
- goto bnx2x_restart_timer;
+ goto timer_restart;
if (poll) {
struct bnx2x_fastpath *fp = &bp->fp[0];
@@ -4345,7 +5142,7 @@ static void bnx2x_timer(unsigned long data)
rc = bnx2x_rx_int(fp, 1000);
}
- if (!nomcp && (bp->bc_ver >= 0x040003)) {
+ if (!nomcp) {
int port = bp->port;
u32 drv_pulse;
u32 mcp_pulse;
@@ -4354,9 +5151,9 @@ static void bnx2x_timer(unsigned long data)
bp->fw_drv_pulse_wr_seq &= DRV_PULSE_SEQ_MASK;
/* TBD - add SYSTEM_TIME */
drv_pulse = bp->fw_drv_pulse_wr_seq;
- SHMEM_WR(bp, drv_fw_mb[port].drv_pulse_mb, drv_pulse);
+ SHMEM_WR(bp, func_mb[port].drv_pulse_mb, drv_pulse);
- mcp_pulse = (SHMEM_RD(bp, drv_fw_mb[port].mcp_pulse_mb) &
+ mcp_pulse = (SHMEM_RD(bp, func_mb[port].mcp_pulse_mb) &
MCP_PULSE_SEQ_MASK);
/* The delta between driver pulse and mcp response
* should be 1 (before mcp response) or 0 (after mcp response)
@@ -4370,11 +5167,11 @@ static void bnx2x_timer(unsigned long data)
}
if (bp->stats_state == STATS_STATE_DISABLE)
- goto bnx2x_restart_timer;
+ goto timer_restart;
bnx2x_update_stats(bp);
-bnx2x_restart_timer:
+timer_restart:
mod_timer(&bp->timer, jiffies + bp->current_interval);
}
@@ -5266,8 +6063,10 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode)
if (mode & 0x1) { /* init common */
DP(BNX2X_MSG_MCP, "starting common init func %d mode %x\n",
func, mode);
- REG_WR(bp, MISC_REG_RESET_REG_1, 0xffffffff);
- REG_WR(bp, MISC_REG_RESET_REG_2, 0xfffc);
+ REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET,
+ 0xffffffff);
+ REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET,
+ 0xfffc);
bnx2x_init_block(bp, MISC_COMMON_START, MISC_COMMON_END);
REG_WR(bp, MISC_REG_LCPLL_CTRL_REG_2, 0x100);
@@ -5487,6 +6286,28 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode)
enable_blocks_attention(bp);
/* enable_blocks_parity(bp); */
+ switch (bp->board & SHARED_HW_CFG_BOARD_TYPE_MASK) {
+ case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G:
+ /* Fan failure is indicated by SPIO 5 */
+ bnx2x_set_spio(bp, MISC_REGISTERS_SPIO_5,
+ MISC_REGISTERS_SPIO_INPUT_HI_Z);
+
+ /* set to active low mode */
+ val = REG_RD(bp, MISC_REG_SPIO_INT);
+ val |= ((1 << MISC_REGISTERS_SPIO_5) <<
+ MISC_REGISTERS_SPIO_INT_OLD_SET_POS);
+ REG_WR(bp, MISC_REG_SPIO_INT, val);
+
+ /* enable interrupt to signal the IGU */
+ val = REG_RD(bp, MISC_REG_SPIO_EVENT_EN);
+ val |= (1 << MISC_REGISTERS_SPIO_5);
+ REG_WR(bp, MISC_REG_SPIO_EVENT_EN, val);
+ break;
+
+ default:
+ break;
+ }
+
} /* end of common init */
/* per port init */
@@ -5646,6 +6467,18 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode)
/* Port MCP comes here */
/* Port DMAE comes here */
+ switch (bp->board & SHARED_HW_CFG_BOARD_TYPE_MASK) {
+ case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G:
+ /* add SPIO 5 to group 0 */
+ val = REG_RD(bp, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
+ val |= AEU_INPUTS_ATTN_BITS_SPIO5;
+ REG_WR(bp, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0, val);
+ break;
+
+ default:
+ break;
+ }
+
bnx2x_link_reset(bp);
/* Reset PCIE errors for debug */
@@ -5670,9 +6503,9 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode)
port = bp->port;
bp->fw_drv_pulse_wr_seq =
- (SHMEM_RD(bp, drv_fw_mb[port].drv_pulse_mb) &
+ (SHMEM_RD(bp, func_mb[port].drv_pulse_mb) &
DRV_PULSE_SEQ_MASK);
- bp->fw_mb = SHMEM_RD(bp, drv_fw_mb[port].fw_mb_param);
+ bp->fw_mb = SHMEM_RD(bp, func_mb[port].fw_mb_param);
DP(BNX2X_MSG_MCP, "drv_pulse 0x%x fw_mb 0x%x\n",
bp->fw_drv_pulse_wr_seq, bp->fw_mb);
} else {
@@ -5685,12 +6518,12 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode)
/* send the MCP a request, block until there is a reply */
static u32 bnx2x_fw_command(struct bnx2x *bp, u32 command)
{
- u32 rc = 0;
- u32 seq = ++bp->fw_seq;
int port = bp->port;
+ u32 seq = ++bp->fw_seq;
+ u32 rc = 0;
- SHMEM_WR(bp, drv_fw_mb[port].drv_mb_header, command|seq);
- DP(BNX2X_MSG_MCP, "wrote command (%x) to FW MB\n", command|seq);
+ SHMEM_WR(bp, func_mb[port].drv_mb_header, (command | seq));
+ DP(BNX2X_MSG_MCP, "wrote command (%x) to FW MB\n", (command | seq));
/* let the FW do it's magic ... */
msleep(100); /* TBD */
@@ -5698,19 +6531,20 @@ static u32 bnx2x_fw_command(struct bnx2x *bp, u32 command)
if (CHIP_REV_IS_SLOW(bp))
msleep(900);
- rc = SHMEM_RD(bp, drv_fw_mb[port].fw_mb_header);
-
+ rc = SHMEM_RD(bp, func_mb[port].fw_mb_header);
DP(BNX2X_MSG_MCP, "read (%x) seq is (%x) from FW MB\n", rc, seq);
/* is this a reply to our command? */
if (seq == (rc & FW_MSG_SEQ_NUMBER_MASK)) {
rc &= FW_MSG_CODE_MASK;
+
} else {
/* FW BUG! */
BNX2X_ERR("FW failed to respond!\n");
bnx2x_fw_dump(bp);
rc = 0;
}
+
return rc;
}
@@ -6559,7 +7393,7 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg)
SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_1000baseT_Full |
- SUPPORTED_2500baseT_Full |
+ SUPPORTED_2500baseX_Full |
SUPPORTED_TP | SUPPORTED_FIBRE |
SUPPORTED_Autoneg |
SUPPORTED_Pause |
@@ -6572,10 +7406,10 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg)
bp->phy_flags |= PHY_SGMII_FLAG;
- bp->supported |= (/* SUPPORTED_10baseT_Half |
- SUPPORTED_10baseT_Full |
- SUPPORTED_100baseT_Half |
- SUPPORTED_100baseT_Full |*/
+ bp->supported |= (SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half |
+ SUPPORTED_100baseT_Full |
SUPPORTED_1000baseT_Full |
SUPPORTED_TP | SUPPORTED_FIBRE |
SUPPORTED_Autoneg |
@@ -6611,7 +7445,7 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg)
SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_1000baseT_Full |
- SUPPORTED_2500baseT_Full |
+ SUPPORTED_2500baseX_Full |
SUPPORTED_10000baseT_Full |
SUPPORTED_TP | SUPPORTED_FIBRE |
SUPPORTED_Autoneg |
@@ -6620,12 +7454,46 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg)
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
+ BNX2X_DEV_INFO("ext_phy_type 0x%x (8705)\n",
+ ext_phy_type);
+
+ bp->supported |= (SUPPORTED_10000baseT_Full |
+ SUPPORTED_FIBRE |
+ SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause);
+ break;
+
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
- BNX2X_DEV_INFO("ext_phy_type 0x%x (8705/6)\n",
+ BNX2X_DEV_INFO("ext_phy_type 0x%x (8706)\n",
+ ext_phy_type);
+
+ bp->supported |= (SUPPORTED_10000baseT_Full |
+ SUPPORTED_1000baseT_Full |
+ SUPPORTED_Autoneg |
+ SUPPORTED_FIBRE |
+ SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause);
+ break;
+
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
+ BNX2X_DEV_INFO("ext_phy_type 0x%x (8072)\n",
ext_phy_type);
bp->supported |= (SUPPORTED_10000baseT_Full |
+ SUPPORTED_1000baseT_Full |
SUPPORTED_FIBRE |
+ SUPPORTED_Autoneg |
+ SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause);
+ break;
+
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
+ BNX2X_DEV_INFO("ext_phy_type 0x%x (SFX7101)\n",
+ ext_phy_type);
+
+ bp->supported |= (SUPPORTED_10000baseT_Full |
+ SUPPORTED_TP |
+ SUPPORTED_Autoneg |
SUPPORTED_Pause |
SUPPORTED_Asym_Pause);
break;
@@ -6682,7 +7550,7 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg)
SUPPORTED_1000baseT_Full);
if (!(bp->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G))
- bp->supported &= ~SUPPORTED_2500baseT_Full;
+ bp->supported &= ~SUPPORTED_2500baseX_Full;
if (!(bp->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G))
bp->supported &= ~SUPPORTED_10000baseT_Full;
@@ -6702,13 +7570,8 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
bp->req_line_speed = 0;
bp->advertising = bp->supported;
} else {
- u32 ext_phy_type;
-
- ext_phy_type = XGXS_EXT_PHY_TYPE(bp);
- if ((ext_phy_type ==
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) ||
- (ext_phy_type ==
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706)) {
+ if (XGXS_EXT_PHY_TYPE(bp) ==
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) {
/* force 10G, no AN */
bp->req_line_speed = SPEED_10000;
bp->advertising =
@@ -6725,8 +7588,7 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
break;
case PORT_FEATURE_LINK_SPEED_10M_FULL:
- if (bp->speed_cap_mask &
- PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL) {
+ if (bp->supported & SUPPORTED_10baseT_Full) {
bp->req_line_speed = SPEED_10;
bp->advertising = (ADVERTISED_10baseT_Full |
ADVERTISED_TP);
@@ -6740,8 +7602,7 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
break;
case PORT_FEATURE_LINK_SPEED_10M_HALF:
- if (bp->speed_cap_mask &
- PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF) {
+ if (bp->supported & SUPPORTED_10baseT_Half) {
bp->req_line_speed = SPEED_10;
bp->req_duplex = DUPLEX_HALF;
bp->advertising = (ADVERTISED_10baseT_Half |
@@ -6756,8 +7617,7 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
break;
case PORT_FEATURE_LINK_SPEED_100M_FULL:
- if (bp->speed_cap_mask &
- PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL) {
+ if (bp->supported & SUPPORTED_100baseT_Full) {
bp->req_line_speed = SPEED_100;
bp->advertising = (ADVERTISED_100baseT_Full |
ADVERTISED_TP);
@@ -6771,8 +7631,7 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
break;
case PORT_FEATURE_LINK_SPEED_100M_HALF:
- if (bp->speed_cap_mask &
- PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF) {
+ if (bp->supported & SUPPORTED_100baseT_Half) {
bp->req_line_speed = SPEED_100;
bp->req_duplex = DUPLEX_HALF;
bp->advertising = (ADVERTISED_100baseT_Half |
@@ -6787,8 +7646,7 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
break;
case PORT_FEATURE_LINK_SPEED_1G:
- if (bp->speed_cap_mask &
- PORT_HW_CFG_SPEED_CAPABILITY_D0_1G) {
+ if (bp->supported & SUPPORTED_1000baseT_Full) {
bp->req_line_speed = SPEED_1000;
bp->advertising = (ADVERTISED_1000baseT_Full |
ADVERTISED_TP);
@@ -6802,10 +7660,9 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
break;
case PORT_FEATURE_LINK_SPEED_2_5G:
- if (bp->speed_cap_mask &
- PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G) {
+ if (bp->supported & SUPPORTED_2500baseX_Full) {
bp->req_line_speed = SPEED_2500;
- bp->advertising = (ADVERTISED_2500baseT_Full |
+ bp->advertising = (ADVERTISED_2500baseX_Full |
ADVERTISED_TP);
} else {
BNX2X_ERR("NVRAM config error. "
@@ -6819,15 +7676,7 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
case PORT_FEATURE_LINK_SPEED_10G_CX4:
case PORT_FEATURE_LINK_SPEED_10G_KX4:
case PORT_FEATURE_LINK_SPEED_10G_KR:
- if (!(bp->phy_flags & PHY_XGXS_FLAG)) {
- BNX2X_ERR("NVRAM config error. "
- "Invalid link_config 0x%x"
- " phy_flags 0x%x\n",
- bp->link_config, bp->phy_flags);
- return;
- }
- if (bp->speed_cap_mask &
- PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) {
+ if (bp->supported & SUPPORTED_10000baseT_Full) {
bp->req_line_speed = SPEED_10000;
bp->advertising = (ADVERTISED_10000baseT_Full |
ADVERTISED_FIBRE);
@@ -6854,43 +7703,13 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
bp->req_flow_ctrl = (bp->link_config &
PORT_FEATURE_FLOW_CONTROL_MASK);
- /* Please refer to Table 28B-3 of the 802.3ab-1999 spec */
- switch (bp->req_flow_ctrl) {
- case FLOW_CTRL_AUTO:
+ if ((bp->req_flow_ctrl == FLOW_CTRL_AUTO) &&
+ (bp->supported & SUPPORTED_Autoneg))
bp->req_autoneg |= AUTONEG_FLOW_CTRL;
- if (bp->dev->mtu <= 4500) {
- bp->pause_mode = PAUSE_BOTH;
- bp->advertising |= (ADVERTISED_Pause |
- ADVERTISED_Asym_Pause);
- } else {
- bp->pause_mode = PAUSE_ASYMMETRIC;
- bp->advertising |= ADVERTISED_Asym_Pause;
- }
- break;
-
- case FLOW_CTRL_TX:
- bp->pause_mode = PAUSE_ASYMMETRIC;
- bp->advertising |= ADVERTISED_Asym_Pause;
- break;
-
- case FLOW_CTRL_RX:
- case FLOW_CTRL_BOTH:
- bp->pause_mode = PAUSE_BOTH;
- bp->advertising |= (ADVERTISED_Pause |
- ADVERTISED_Asym_Pause);
- break;
- case FLOW_CTRL_NONE:
- default:
- bp->pause_mode = PAUSE_NONE;
- bp->advertising &= ~(ADVERTISED_Pause |
- ADVERTISED_Asym_Pause);
- break;
- }
- BNX2X_DEV_INFO("req_autoneg 0x%x req_flow_ctrl 0x%x\n"
- KERN_INFO " pause_mode %d advertising 0x%x\n",
- bp->req_autoneg, bp->req_flow_ctrl,
- bp->pause_mode, bp->advertising);
+ BNX2X_DEV_INFO("req_autoneg 0x%x req_flow_ctrl 0x%x"
+ " advertising 0x%x\n",
+ bp->req_autoneg, bp->req_flow_ctrl, bp->advertising);
}
static void bnx2x_get_hwinfo(struct bnx2x *bp)
@@ -6923,16 +7742,16 @@ static void bnx2x_get_hwinfo(struct bnx2x *bp)
val = SHMEM_RD(bp, validity_map[port]);
if ((val & (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB))
- != (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB))
- BNX2X_ERR("MCP validity signature bad\n");
+ != (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB))
+ BNX2X_ERR("BAD MCP validity signature\n");
- bp->fw_seq = (SHMEM_RD(bp, drv_fw_mb[port].drv_mb_header) &
+ bp->fw_seq = (SHMEM_RD(bp, func_mb[port].drv_mb_header) &
DRV_MSG_SEQ_NUMBER_MASK);
bp->hw_config = SHMEM_RD(bp, dev_info.shared_hw_config.config);
-
+ bp->board = SHMEM_RD(bp, dev_info.shared_hw_config.board);
bp->serdes_config =
- SHMEM_RD(bp, dev_info.port_hw_config[bp->port].serdes_config);
+ SHMEM_RD(bp, dev_info.port_hw_config[port].serdes_config);
bp->lane_config =
SHMEM_RD(bp, dev_info.port_hw_config[port].lane_config);
bp->ext_phy_config =
@@ -6945,13 +7764,13 @@ static void bnx2x_get_hwinfo(struct bnx2x *bp)
bp->link_config =
SHMEM_RD(bp, dev_info.port_feature_config[port].link_config);
- BNX2X_DEV_INFO("hw_config (%08x) serdes_config (%08x)\n"
+ BNX2X_DEV_INFO("hw_config (%08x) board (%08x) serdes_config (%08x)\n"
KERN_INFO " lane_config (%08x) ext_phy_config (%08x)\n"
KERN_INFO " speed_cap_mask (%08x) link_config (%08x)"
" fw_seq (%08x)\n",
- bp->hw_config, bp->serdes_config, bp->lane_config,
- bp->ext_phy_config, bp->speed_cap_mask,
- bp->link_config, bp->fw_seq);
+ bp->hw_config, bp->board, bp->serdes_config,
+ bp->lane_config, bp->ext_phy_config,
+ bp->speed_cap_mask, bp->link_config, bp->fw_seq);
switch_cfg = (bp->link_config & PORT_FEATURE_CONNECTED_SWITCH_MASK);
bnx2x_link_settings_supported(bp, switch_cfg);
@@ -7005,14 +7824,8 @@ static void bnx2x_get_hwinfo(struct bnx2x *bp)
return;
set_mac: /* only supposed to happen on emulation/FPGA */
- BNX2X_ERR("warning constant MAC workaround active\n");
- bp->dev->dev_addr[0] = 0;
- bp->dev->dev_addr[1] = 0x50;
- bp->dev->dev_addr[2] = 0xc2;
- bp->dev->dev_addr[3] = 0x2c;
- bp->dev->dev_addr[4] = 0x71;
- bp->dev->dev_addr[5] = port ? 0x0d : 0x0e;
-
+ BNX2X_ERR("warning rendom MAC workaround active\n");
+ random_ether_addr(bp->dev->dev_addr);
memcpy(bp->dev->perm_addr, bp->dev->dev_addr, 6);
}
@@ -7039,19 +7852,34 @@ static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
}
if (bp->phy_flags & PHY_XGXS_FLAG) {
- cmd->port = PORT_FIBRE;
- } else {
+ u32 ext_phy_type = XGXS_EXT_PHY_TYPE(bp);
+
+ switch (ext_phy_type) {
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
+ cmd->port = PORT_FIBRE;
+ break;
+
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
+ cmd->port = PORT_TP;
+ break;
+
+ default:
+ DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n",
+ bp->ext_phy_config);
+ }
+ } else
cmd->port = PORT_TP;
- }
cmd->phy_address = bp->phy_addr;
cmd->transceiver = XCVR_INTERNAL;
- if (bp->req_autoneg & AUTONEG_SPEED) {
+ if (bp->req_autoneg & AUTONEG_SPEED)
cmd->autoneg = AUTONEG_ENABLE;
- } else {
+ else
cmd->autoneg = AUTONEG_DISABLE;
- }
cmd->maxtxpkt = 0;
cmd->maxrxpkt = 0;
@@ -7082,8 +7910,10 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
switch (cmd->port) {
case PORT_TP:
- if (!(bp->supported & SUPPORTED_TP))
+ if (!(bp->supported & SUPPORTED_TP)) {
+ DP(NETIF_MSG_LINK, "TP not supported\n");
return -EINVAL;
+ }
if (bp->phy_flags & PHY_XGXS_FLAG) {
bnx2x_link_reset(bp);
@@ -7093,8 +7923,10 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
break;
case PORT_FIBRE:
- if (!(bp->supported & SUPPORTED_FIBRE))
+ if (!(bp->supported & SUPPORTED_FIBRE)) {
+ DP(NETIF_MSG_LINK, "FIBRE not supported\n");
return -EINVAL;
+ }
if (!(bp->phy_flags & PHY_XGXS_FLAG)) {
bnx2x_link_reset(bp);
@@ -7104,12 +7936,15 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
break;
default:
+ DP(NETIF_MSG_LINK, "Unknown port type\n");
return -EINVAL;
}
if (cmd->autoneg == AUTONEG_ENABLE) {
- if (!(bp->supported & SUPPORTED_Autoneg))
+ if (!(bp->supported & SUPPORTED_Autoneg)) {
+ DP(NETIF_MSG_LINK, "Aotoneg not supported\n");
return -EINVAL;
+ }
/* advertise the requested speed and duplex if supported */
cmd->advertising &= bp->supported;
@@ -7124,14 +7959,22 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
switch (cmd->speed) {
case SPEED_10:
if (cmd->duplex == DUPLEX_FULL) {
- if (!(bp->supported & SUPPORTED_10baseT_Full))
+ if (!(bp->supported &
+ SUPPORTED_10baseT_Full)) {
+ DP(NETIF_MSG_LINK,
+ "10M full not supported\n");
return -EINVAL;
+ }
advertising = (ADVERTISED_10baseT_Full |
ADVERTISED_TP);
} else {
- if (!(bp->supported & SUPPORTED_10baseT_Half))
+ if (!(bp->supported &
+ SUPPORTED_10baseT_Half)) {
+ DP(NETIF_MSG_LINK,
+ "10M half not supported\n");
return -EINVAL;
+ }
advertising = (ADVERTISED_10baseT_Half |
ADVERTISED_TP);
@@ -7141,15 +7984,21 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
case SPEED_100:
if (cmd->duplex == DUPLEX_FULL) {
if (!(bp->supported &
- SUPPORTED_100baseT_Full))
+ SUPPORTED_100baseT_Full)) {
+ DP(NETIF_MSG_LINK,
+ "100M full not supported\n");
return -EINVAL;
+ }
advertising = (ADVERTISED_100baseT_Full |
ADVERTISED_TP);
} else {
if (!(bp->supported &
- SUPPORTED_100baseT_Half))
+ SUPPORTED_100baseT_Half)) {
+ DP(NETIF_MSG_LINK,
+ "100M half not supported\n");
return -EINVAL;
+ }
advertising = (ADVERTISED_100baseT_Half |
ADVERTISED_TP);
@@ -7157,39 +8006,54 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
break;
case SPEED_1000:
- if (cmd->duplex != DUPLEX_FULL)
+ if (cmd->duplex != DUPLEX_FULL) {
+ DP(NETIF_MSG_LINK, "1G half not supported\n");
return -EINVAL;
+ }
- if (!(bp->supported & SUPPORTED_1000baseT_Full))
+ if (!(bp->supported & SUPPORTED_1000baseT_Full)) {
+ DP(NETIF_MSG_LINK, "1G full not supported\n");
return -EINVAL;
+ }
advertising = (ADVERTISED_1000baseT_Full |
ADVERTISED_TP);
break;
case SPEED_2500:
- if (cmd->duplex != DUPLEX_FULL)
+ if (cmd->duplex != DUPLEX_FULL) {
+ DP(NETIF_MSG_LINK,
+ "2.5G half not supported\n");
return -EINVAL;
+ }
- if (!(bp->supported & SUPPORTED_2500baseT_Full))
+ if (!(bp->supported & SUPPORTED_2500baseX_Full)) {
+ DP(NETIF_MSG_LINK,
+ "2.5G full not supported\n");
return -EINVAL;
+ }
- advertising = (ADVERTISED_2500baseT_Full |
+ advertising = (ADVERTISED_2500baseX_Full |
ADVERTISED_TP);
break;
case SPEED_10000:
- if (cmd->duplex != DUPLEX_FULL)
+ if (cmd->duplex != DUPLEX_FULL) {
+ DP(NETIF_MSG_LINK, "10G half not supported\n");
return -EINVAL;
+ }
- if (!(bp->supported & SUPPORTED_10000baseT_Full))
+ if (!(bp->supported & SUPPORTED_10000baseT_Full)) {
+ DP(NETIF_MSG_LINK, "10G full not supported\n");
return -EINVAL;
+ }
advertising = (ADVERTISED_10000baseT_Full |
ADVERTISED_FIBRE);
break;
default:
+ DP(NETIF_MSG_LINK, "Unsupported speed\n");
return -EINVAL;
}
@@ -7389,8 +8253,7 @@ static void bnx2x_disable_nvram_access(struct bnx2x *bp)
static int bnx2x_nvram_read_dword(struct bnx2x *bp, u32 offset, u32 *ret_val,
u32 cmd_flags)
{
- int rc;
- int count, i;
+ int count, i, rc;
u32 val;
/* build the command word */
@@ -7510,8 +8373,7 @@ static int bnx2x_get_eeprom(struct net_device *dev,
static int bnx2x_nvram_write_dword(struct bnx2x *bp, u32 offset, u32 val,
u32 cmd_flags)
{
- int rc;
- int count, i;
+ int count, i, rc;
/* build the command word */
cmd_flags |= MCPR_NVM_COMMAND_DOIT | MCPR_NVM_COMMAND_WR;
@@ -7548,7 +8410,7 @@ static int bnx2x_nvram_write_dword(struct bnx2x *bp, u32 offset, u32 val,
return rc;
}
-#define BYTE_OFFSET(offset) (8 * (offset & 0x03))
+#define BYTE_OFFSET(offset) (8 * (offset & 0x03))
static int bnx2x_nvram_write1(struct bnx2x *bp, u32 offset, u8 *data_buf,
int buf_size)
@@ -7779,52 +8641,29 @@ static int bnx2x_set_pauseparam(struct net_device *dev,
DP_LEVEL " autoneg %d rx_pause %d tx_pause %d\n",
epause->cmd, epause->autoneg, epause->rx_pause, epause->tx_pause);
- bp->req_flow_ctrl = FLOW_CTRL_AUTO;
if (epause->autoneg) {
- bp->req_autoneg |= AUTONEG_FLOW_CTRL;
- if (bp->dev->mtu <= 4500) {
- bp->pause_mode = PAUSE_BOTH;
- bp->advertising |= (ADVERTISED_Pause |
- ADVERTISED_Asym_Pause);
- } else {
- bp->pause_mode = PAUSE_ASYMMETRIC;
- bp->advertising |= ADVERTISED_Asym_Pause;
+ if (!(bp->supported & SUPPORTED_Autoneg)) {
+ DP(NETIF_MSG_LINK, "Aotoneg not supported\n");
+ return -EINVAL;
}
- } else {
+ bp->req_autoneg |= AUTONEG_FLOW_CTRL;
+ } else
bp->req_autoneg &= ~AUTONEG_FLOW_CTRL;
- if (epause->rx_pause)
- bp->req_flow_ctrl |= FLOW_CTRL_RX;
- if (epause->tx_pause)
- bp->req_flow_ctrl |= FLOW_CTRL_TX;
-
- switch (bp->req_flow_ctrl) {
- case FLOW_CTRL_AUTO:
- bp->req_flow_ctrl = FLOW_CTRL_NONE;
- bp->pause_mode = PAUSE_NONE;
- bp->advertising &= ~(ADVERTISED_Pause |
- ADVERTISED_Asym_Pause);
- break;
+ bp->req_flow_ctrl = FLOW_CTRL_AUTO;
- case FLOW_CTRL_TX:
- bp->pause_mode = PAUSE_ASYMMETRIC;
- bp->advertising |= ADVERTISED_Asym_Pause;
- break;
+ if (epause->rx_pause)
+ bp->req_flow_ctrl |= FLOW_CTRL_RX;
+ if (epause->tx_pause)
+ bp->req_flow_ctrl |= FLOW_CTRL_TX;
- case FLOW_CTRL_RX:
- case FLOW_CTRL_BOTH:
- bp->pause_mode = PAUSE_BOTH;
- bp->advertising |= (ADVERTISED_Pause |
- ADVERTISED_Asym_Pause);
- break;
- }
- }
+ if (!(bp->req_autoneg & AUTONEG_FLOW_CTRL) &&
+ (bp->req_flow_ctrl == FLOW_CTRL_AUTO))
+ bp->req_flow_ctrl = FLOW_CTRL_NONE;
- DP(NETIF_MSG_LINK, "req_autoneg 0x%x req_flow_ctrl 0x%x\n"
- DP_LEVEL " pause_mode %d advertising 0x%x\n",
- bp->req_autoneg, bp->req_flow_ctrl, bp->pause_mode,
- bp->advertising);
+ DP(NETIF_MSG_LINK, "req_autoneg 0x%x req_flow_ctrl 0x%x\n",
+ bp->req_autoneg, bp->req_flow_ctrl);
bnx2x_stop_stats(bp);
bnx2x_link_initialize(bp);
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-25 03:18:41 +0000