summaryrefslogtreecommitdiff
path: root/drivers/net/bnx2x_init.h
diff options
context:
space:
mode:
authorVladislav Zolotarov <vladz@broadcom.com>2009-04-27 03:27:43 -0700
committerDavid S. Miller <davem@davemloft.net>2009-04-27 03:27:43 -0700
commit94a78b79cb5f14c09a42522738d6694c6a1cdd20 (patch)
tree17bb6b92c16c91db0398baafa04996c958a8d494 /drivers/net/bnx2x_init.h
parentec9323f417e803f07a99a15a9cfb207662ad2c55 (diff)
bnx2x: Separated FW from the source.
>From now on FW will be downloaded from the binary file using request_firmware. There will be different files for every supported chip. Currently 57710 (e1) and 57711 (e1h). File names have the following format: bnx2x-<chip version>-<FW version>.fw. ihex versions of current FW files are submitted in the next patch. Each binary file has a header in the following format: struct bnx2x_fw_file_section { __be32 len; __be32 offset; } struct bnx2x_fw_file_hdr { struct bnx2x_fw_file_section init_ops; struct bnx2x_fw_file_section init_ops_offsets; struct bnx2x_fw_file_section init_data; struct bnx2x_fw_file_section tsem_int_table_data; struct bnx2x_fw_file_section tsem_pram_data; struct bnx2x_fw_file_section usem_int_table_data; struct bnx2x_fw_file_section usem_pram_data; struct bnx2x_fw_file_section csem_int_table_data; struct bnx2x_fw_file_section csem_pram_data; struct bnx2x_fw_file_section xsem_int_table_data; struct bnx2x_fw_file_section xsem_pram_data; struct bnx2x_fw_file_section fw_version; } Each bnx2x_fw_file_section contains the length and the offset of the appropriate section in the binary file. Values are stored in the big endian format. Data types of arrays: init_data __be32 init_ops_offsets __be16 XXsem_pram_data u8 XXsem_int_table_data u8 init_ops struct raw_op { u8 op; __be24 offset; __be32 data; } fw_version u8 >From now boundaries of a specific initialization stage are stored in init_ops_offsets array instead of being defined by separate macroes. The index in init_ops_offsets is calculated by BLOCK_OPS_IDX macro: #define BLOCK_OPS_IDX(block, stage, end) \ (2*(((block)*STAGE_IDX_MAX) + (stage)) + (end)) Security: In addition to sanity check of array boundaries bnx2x will check a FW version. Additional checks might be added in the future. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/bnx2x_init.h')
-rw-r--r--drivers/net/bnx2x_init.h605
1 files changed, 69 insertions, 536 deletions
diff --git a/drivers/net/bnx2x_init.h b/drivers/net/bnx2x_init.h
index 39ba2936c0c2..3ba4d888068f 100644
--- a/drivers/net/bnx2x_init.h
+++ b/drivers/net/bnx2x_init.h
@@ -1,4 +1,5 @@
/* bnx2x_init.h: Broadcom Everest network driver.
+ * Structures and macroes needed during the initialization.
*
* Copyright (c) 2007-2009 Broadcom Corporation
*
@@ -8,6 +9,7 @@
*
* Maintained by: Eilon Greenstein <eilong@broadcom.com>
* Written by: Eliezer Tamir
+ * Modified by: Vladislav Zolotarov <vladz@broadcom.com>
*/
#ifndef BNX2X_INIT_H
@@ -45,33 +47,71 @@
#define OP_WR_64 0x8 /* write 64 bit pattern */
#define OP_WB 0x9 /* copy a string using DMAE */
-/* Operation specific for E1 */
-#define OP_RD_E1 0xa /* read single register */
-#define OP_WR_E1 0xb /* write single register */
-#define OP_IW_E1 0xc /* write single register using mailbox */
-#define OP_SW_E1 0xd /* copy a string to the device */
-#define OP_SI_E1 0xe /* copy a string using mailbox */
-#define OP_ZR_E1 0xf /* clear memory */
-#define OP_ZP_E1 0x10 /* unzip then copy with DMAE */
-#define OP_WR_64_E1 0x11 /* write 64 bit pattern on E1 */
-#define OP_WB_E1 0x12 /* copy a string using DMAE */
-
-/* Operation specific for E1H */
-#define OP_RD_E1H 0x13 /* read single register */
-#define OP_WR_E1H 0x14 /* write single register */
-#define OP_IW_E1H 0x15 /* write single register using mailbox */
-#define OP_SW_E1H 0x16 /* copy a string to the device */
-#define OP_SI_E1H 0x17 /* copy a string using mailbox */
-#define OP_ZR_E1H 0x18 /* clear memory */
-#define OP_ZP_E1H 0x19 /* unzip then copy with DMAE */
-#define OP_WR_64_E1H 0x1a /* write 64 bit pattern on E1H */
-#define OP_WB_E1H 0x1b /* copy a string using DMAE */
-
/* FPGA and EMUL specific operations */
-#define OP_WR_EMUL_E1H 0x1c /* write single register on E1H Emul */
-#define OP_WR_EMUL 0x1d /* write single register on Emulation */
-#define OP_WR_FPGA 0x1e /* write single register on FPGA */
-#define OP_WR_ASIC 0x1f /* write single register on ASIC */
+#define OP_WR_EMUL 0xa /* write single register on Emulation */
+#define OP_WR_FPGA 0xb /* write single register on FPGA */
+#define OP_WR_ASIC 0xc /* write single register on ASIC */
+
+/* Init stages */
+#define COMMON_STAGE 0
+#define PORT0_STAGE 1
+#define PORT1_STAGE 2
+/* Never reorder FUNCx stages !!! */
+#define FUNC0_STAGE 3
+#define FUNC1_STAGE 4
+#define FUNC2_STAGE 5
+#define FUNC3_STAGE 6
+#define FUNC4_STAGE 7
+#define FUNC5_STAGE 8
+#define FUNC6_STAGE 9
+#define FUNC7_STAGE 10
+#define STAGE_IDX_MAX 11
+
+#define STAGE_START 0
+#define STAGE_END 1
+
+
+/* Indices of blocks */
+#define PRS_BLOCK 0
+#define SRCH_BLOCK 1
+#define TSDM_BLOCK 2
+#define TCM_BLOCK 3
+#define BRB1_BLOCK 4
+#define TSEM_BLOCK 5
+#define PXPCS_BLOCK 6
+#define EMAC0_BLOCK 7
+#define EMAC1_BLOCK 8
+#define DBU_BLOCK 9
+#define MISC_BLOCK 10
+#define DBG_BLOCK 11
+#define NIG_BLOCK 12
+#define MCP_BLOCK 13
+#define UPB_BLOCK 14
+#define CSDM_BLOCK 15
+#define USDM_BLOCK 16
+#define CCM_BLOCK 17
+#define UCM_BLOCK 18
+#define USEM_BLOCK 19
+#define CSEM_BLOCK 20
+#define XPB_BLOCK 21
+#define DQ_BLOCK 22
+#define TIMERS_BLOCK 23
+#define XSDM_BLOCK 24
+#define QM_BLOCK 25
+#define PBF_BLOCK 26
+#define XCM_BLOCK 27
+#define XSEM_BLOCK 28
+#define CDU_BLOCK 29
+#define DMAE_BLOCK 30
+#define PXP_BLOCK 31
+#define CFC_BLOCK 32
+#define HC_BLOCK 33
+#define PXP2_BLOCK 34
+#define MISC_AEU_BLOCK 35
+
+/* Returns the index of start or end of a specific block stage in ops array*/
+#define BLOCK_OPS_IDX(block, stage, end) \
+ (2*(((block)*STAGE_IDX_MAX) + (stage)) + (end))
struct raw_op {
@@ -118,292 +158,6 @@ union init_op {
struct raw_op raw;
};
-#include "bnx2x_init_values.h"
-
-static void bnx2x_reg_wr_ind(struct bnx2x *bp, u32 addr, u32 val);
-static int bnx2x_gunzip(struct bnx2x *bp, u8 *zbuf, int len);
-
-static void bnx2x_init_str_wr(struct bnx2x *bp, u32 addr, const u32 *data,
- u32 len)
-{
- int i;
-
- for (i = 0; i < len; i++) {
- REG_WR(bp, addr + i*4, data[i]);
- if (!(i % 10000)) {
- touch_softlockup_watchdog();
- cpu_relax();
- }
- }
-}
-
-static void bnx2x_init_ind_wr(struct bnx2x *bp, u32 addr, const u32 *data,
- u16 len)
-{
- int i;
-
- for (i = 0; i < len; i++) {
- REG_WR_IND(bp, addr + i*4, data[i]);
- if (!(i % 10000)) {
- touch_softlockup_watchdog();
- cpu_relax();
- }
- }
-}
-
-static void bnx2x_write_big_buf(struct bnx2x *bp, u32 addr, u32 len)
-{
- int offset = 0;
-
- if (bp->dmae_ready) {
- while (len > DMAE_LEN32_WR_MAX) {
- bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,
- addr + offset, DMAE_LEN32_WR_MAX);
- offset += DMAE_LEN32_WR_MAX * 4;
- len -= DMAE_LEN32_WR_MAX;
- }
- bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,
- addr + offset, len);
- } else
- bnx2x_init_str_wr(bp, addr, bp->gunzip_buf, len);
-}
-
-static void bnx2x_init_fill(struct bnx2x *bp, u32 addr, int fill, u32 len)
-{
- u32 buf_len = (((len * 4) > FW_BUF_SIZE) ? FW_BUF_SIZE : (len * 4));
- u32 buf_len32 = buf_len / 4;
- int i;
-
- memset(bp->gunzip_buf, fill, buf_len);
-
- for (i = 0; i < len; i += buf_len32) {
- u32 cur_len = min(buf_len32, len - i);
-
- bnx2x_write_big_buf(bp, addr + i * 4, cur_len);
- }
-}
-
-static void bnx2x_init_wr_64(struct bnx2x *bp, u32 addr, const u32 *data,
- u32 len64)
-{
- u32 buf_len32 = FW_BUF_SIZE / 4;
- u32 len = len64 * 2;
- u64 data64 = 0;
- int i;
-
- /* 64 bit value is in a blob: first low DWORD, then high DWORD */
- data64 = HILO_U64((*(data + 1)), (*data));
- len64 = min((u32)(FW_BUF_SIZE/8), len64);
- for (i = 0; i < len64; i++) {
- u64 *pdata = ((u64 *)(bp->gunzip_buf)) + i;
-
- *pdata = data64;
- }
-
- for (i = 0; i < len; i += buf_len32) {
- u32 cur_len = min(buf_len32, len - i);
-
- bnx2x_write_big_buf(bp, addr + i * 4, cur_len);
- }
-}
-
-/*********************************************************
- There are different blobs for each PRAM section.
- In addition, each blob write operation is divided into a few operations
- in order to decrease the amount of phys. contiguous buffer needed.
- Thus, when we select a blob the address may be with some offset
- from the beginning of PRAM section.
- The same holds for the INT_TABLE sections.
-**********************************************************/
-#define IF_IS_INT_TABLE_ADDR(base, addr) \
- if (((base) <= (addr)) && ((base) + 0x400 >= (addr)))
-
-#define IF_IS_PRAM_ADDR(base, addr) \
- if (((base) <= (addr)) && ((base) + 0x40000 >= (addr)))
-
-static const u32 *bnx2x_sel_blob(u32 addr, const u32 *data, int is_e1)
-{
- IF_IS_INT_TABLE_ADDR(TSEM_REG_INT_TABLE, addr)
- data = is_e1 ? tsem_int_table_data_e1 :
- tsem_int_table_data_e1h;
- else
- IF_IS_INT_TABLE_ADDR(CSEM_REG_INT_TABLE, addr)
- data = is_e1 ? csem_int_table_data_e1 :
- csem_int_table_data_e1h;
- else
- IF_IS_INT_TABLE_ADDR(USEM_REG_INT_TABLE, addr)
- data = is_e1 ? usem_int_table_data_e1 :
- usem_int_table_data_e1h;
- else
- IF_IS_INT_TABLE_ADDR(XSEM_REG_INT_TABLE, addr)
- data = is_e1 ? xsem_int_table_data_e1 :
- xsem_int_table_data_e1h;
- else
- IF_IS_PRAM_ADDR(TSEM_REG_PRAM, addr)
- data = is_e1 ? tsem_pram_data_e1 : tsem_pram_data_e1h;
- else
- IF_IS_PRAM_ADDR(CSEM_REG_PRAM, addr)
- data = is_e1 ? csem_pram_data_e1 : csem_pram_data_e1h;
- else
- IF_IS_PRAM_ADDR(USEM_REG_PRAM, addr)
- data = is_e1 ? usem_pram_data_e1 : usem_pram_data_e1h;
- else
- IF_IS_PRAM_ADDR(XSEM_REG_PRAM, addr)
- data = is_e1 ? xsem_pram_data_e1 : xsem_pram_data_e1h;
-
- return data;
-}
-
-static void bnx2x_init_wr_wb(struct bnx2x *bp, u32 addr, const u32 *data,
- u32 len, int gunzip, int is_e1, u32 blob_off)
-{
- int offset = 0;
-
- data = bnx2x_sel_blob(addr, data, is_e1) + blob_off;
-
- if (gunzip) {
- int rc;
-#ifdef __BIG_ENDIAN
- int i, size;
- u32 *temp;
-
- temp = kmalloc(len, GFP_KERNEL);
- size = (len / 4) + ((len % 4) ? 1 : 0);
- for (i = 0; i < size; i++)
- temp[i] = swab32(data[i]);
- data = temp;
-#endif
- rc = bnx2x_gunzip(bp, (u8 *)data, len);
- if (rc) {
- BNX2X_ERR("gunzip failed ! rc %d\n", rc);
-#ifdef __BIG_ENDIAN
- kfree(temp);
-#endif
- return;
- }
- len = bp->gunzip_outlen;
-#ifdef __BIG_ENDIAN
- kfree(temp);
- for (i = 0; i < len; i++)
- ((u32 *)bp->gunzip_buf)[i] =
- swab32(((u32 *)bp->gunzip_buf)[i]);
-#endif
- } else {
- if ((len * 4) > FW_BUF_SIZE) {
- BNX2X_ERR("LARGE DMAE OPERATION ! "
- "addr 0x%x len 0x%x\n", addr, len*4);
- return;
- }
- memcpy(bp->gunzip_buf, data, len * 4);
- }
-
- if (bp->dmae_ready) {
- while (len > DMAE_LEN32_WR_MAX) {
- bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,
- addr + offset, DMAE_LEN32_WR_MAX);
- offset += DMAE_LEN32_WR_MAX * 4;
- len -= DMAE_LEN32_WR_MAX;
- }
- bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,
- addr + offset, len);
- } else
- bnx2x_init_ind_wr(bp, addr, bp->gunzip_buf, len);
-}
-
-static void bnx2x_init_block(struct bnx2x *bp, u32 op_start, u32 op_end)
-{
- int is_e1 = CHIP_IS_E1(bp);
- int is_e1h = CHIP_IS_E1H(bp);
- int is_emul_e1h = (CHIP_REV_IS_EMUL(bp) && is_e1h);
- int hw_wr, i;
- union init_op *op;
- u32 op_type, addr, len;
- const u32 *data, *data_base;
-
- if (CHIP_REV_IS_FPGA(bp))
- hw_wr = OP_WR_FPGA;
- else if (CHIP_REV_IS_EMUL(bp))
- hw_wr = OP_WR_EMUL;
- else
- hw_wr = OP_WR_ASIC;
-
- if (is_e1)
- data_base = init_data_e1;
- else /* CHIP_IS_E1H(bp) */
- data_base = init_data_e1h;
-
- for (i = op_start; i < op_end; i++) {
-
- op = (union init_op *)&(init_ops[i]);
-
- op_type = op->str_wr.op;
- addr = op->str_wr.offset;
- len = op->str_wr.data_len;
- data = data_base + op->str_wr.data_off;
-
- /* careful! it must be in order */
- if (unlikely(op_type > OP_WB)) {
-
- /* If E1 only */
- if (op_type <= OP_WB_E1) {
- if (is_e1)
- op_type -= (OP_RD_E1 - OP_RD);
-
- /* If E1H only */
- } else if (op_type <= OP_WB_E1H) {
- if (is_e1h)
- op_type -= (OP_RD_E1H - OP_RD);
- }
-
- /* HW/EMUL specific */
- if (op_type == hw_wr)
- op_type = OP_WR;
-
- /* EMUL on E1H is special */
- if ((op_type == OP_WR_EMUL_E1H) && is_emul_e1h)
- op_type = OP_WR;
- }
-
- switch (op_type) {
- case OP_RD:
- REG_RD(bp, addr);
- break;
- case OP_WR:
- REG_WR(bp, addr, op->write.val);
- break;
- case OP_SW:
- bnx2x_init_str_wr(bp, addr, data, len);
- break;
- case OP_WB:
- bnx2x_init_wr_wb(bp, addr, data, len, 0, is_e1, 0);
- break;
- case OP_SI:
- bnx2x_init_ind_wr(bp, addr, data, len);
- break;
- case OP_ZR:
- bnx2x_init_fill(bp, addr, 0, op->zero.len);
- break;
- case OP_ZP:
- bnx2x_init_wr_wb(bp, addr, data, len, 1, is_e1,
- op->str_wr.data_off);
- break;
- case OP_WR_64:
- bnx2x_init_wr_64(bp, addr, data, len);
- break;
- default:
- /* happens whenever an op is of a diff HW */
-#if 0
- DP(NETIF_MSG_HW, "skipping init operation "
- "index %d[%d:%d]: type %d addr 0x%x "
- "len %d(0x%x)\n",
- i, op_start, op_end, op_type, addr, len, len);
-#endif
- break;
- }
- }
-}
-
-
/****************************************************************************
* PXP
****************************************************************************/
@@ -567,111 +321,6 @@ static const struct arb_line write_arb_addr[NUM_WR_Q-1] = {
PXP2_REG_RQ_BW_WR_UBOUND30}
};
-static void bnx2x_init_pxp(struct bnx2x *bp)
-{
- u16 devctl;
- int r_order, w_order;
- u32 val, i;
-
- pci_read_config_word(bp->pdev,
- bp->pcie_cap + PCI_EXP_DEVCTL, &devctl);
- DP(NETIF_MSG_HW, "read 0x%x from devctl\n", devctl);
- w_order = ((devctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5);
- if (bp->mrrs == -1)
- r_order = ((devctl & PCI_EXP_DEVCTL_READRQ) >> 12);
- else {
- DP(NETIF_MSG_HW, "force read order to %d\n", bp->mrrs);
- r_order = bp->mrrs;
- }
-
- if (r_order > MAX_RD_ORD) {
- DP(NETIF_MSG_HW, "read order of %d order adjusted to %d\n",
- r_order, MAX_RD_ORD);
- r_order = MAX_RD_ORD;
- }
- if (w_order > MAX_WR_ORD) {
- DP(NETIF_MSG_HW, "write order of %d order adjusted to %d\n",
- w_order, MAX_WR_ORD);
- w_order = MAX_WR_ORD;
- }
- if (CHIP_REV_IS_FPGA(bp)) {
- DP(NETIF_MSG_HW, "write order adjusted to 1 for FPGA\n");
- w_order = 0;
- }
- DP(NETIF_MSG_HW, "read order %d write order %d\n", r_order, w_order);
-
- for (i = 0; i < NUM_RD_Q-1; i++) {
- REG_WR(bp, read_arb_addr[i].l, read_arb_data[i][r_order].l);
- REG_WR(bp, read_arb_addr[i].add,
- read_arb_data[i][r_order].add);
- REG_WR(bp, read_arb_addr[i].ubound,
- read_arb_data[i][r_order].ubound);
- }
-
- for (i = 0; i < NUM_WR_Q-1; i++) {
- if ((write_arb_addr[i].l == PXP2_REG_RQ_BW_WR_L29) ||
- (write_arb_addr[i].l == PXP2_REG_RQ_BW_WR_L30)) {
-
- REG_WR(bp, write_arb_addr[i].l,
- write_arb_data[i][w_order].l);
-
- REG_WR(bp, write_arb_addr[i].add,
- write_arb_data[i][w_order].add);
-
- REG_WR(bp, write_arb_addr[i].ubound,
- write_arb_data[i][w_order].ubound);
- } else {
-
- val = REG_RD(bp, write_arb_addr[i].l);
- REG_WR(bp, write_arb_addr[i].l,
- val | (write_arb_data[i][w_order].l << 10));
-
- val = REG_RD(bp, write_arb_addr[i].add);
- REG_WR(bp, write_arb_addr[i].add,
- val | (write_arb_data[i][w_order].add << 10));
-
- val = REG_RD(bp, write_arb_addr[i].ubound);
- REG_WR(bp, write_arb_addr[i].ubound,
- val | (write_arb_data[i][w_order].ubound << 7));
- }
- }
-
- val = write_arb_data[NUM_WR_Q-1][w_order].add;
- val += write_arb_data[NUM_WR_Q-1][w_order].ubound << 10;
- val += write_arb_data[NUM_WR_Q-1][w_order].l << 17;
- REG_WR(bp, PXP2_REG_PSWRQ_BW_RD, val);
-
- val = read_arb_data[NUM_RD_Q-1][r_order].add;
- val += read_arb_data[NUM_RD_Q-1][r_order].ubound << 10;
- val += read_arb_data[NUM_RD_Q-1][r_order].l << 17;
- REG_WR(bp, PXP2_REG_PSWRQ_BW_WR, val);
-
- REG_WR(bp, PXP2_REG_RQ_WR_MBS0, w_order);
- REG_WR(bp, PXP2_REG_RQ_WR_MBS1, w_order);
- REG_WR(bp, PXP2_REG_RQ_RD_MBS0, r_order);
- REG_WR(bp, PXP2_REG_RQ_RD_MBS1, r_order);
-
- if (r_order == MAX_RD_ORD)
- REG_WR(bp, PXP2_REG_RQ_PDR_LIMIT, 0xe00);
-
- REG_WR(bp, PXP2_REG_WR_USDMDP_TH, (0x18 << w_order));
-
- if (CHIP_IS_E1H(bp)) {
- val = ((w_order == 0) ? 2 : 3);
- REG_WR(bp, PXP2_REG_WR_HC_MPS, val);
- REG_WR(bp, PXP2_REG_WR_USDM_MPS, val);
- REG_WR(bp, PXP2_REG_WR_CSDM_MPS, val);
- REG_WR(bp, PXP2_REG_WR_TSDM_MPS, val);
- REG_WR(bp, PXP2_REG_WR_XSDM_MPS, val);
- REG_WR(bp, PXP2_REG_WR_QM_MPS, val);
- REG_WR(bp, PXP2_REG_WR_TM_MPS, val);
- REG_WR(bp, PXP2_REG_WR_SRC_MPS, val);
- REG_WR(bp, PXP2_REG_WR_DBG_MPS, val);
- REG_WR(bp, PXP2_REG_WR_DMAE_MPS, 2); /* DMAE is special */
- REG_WR(bp, PXP2_REG_WR_CDU_MPS, val);
- }
-}
-
/****************************************************************************
* CDU
@@ -695,128 +344,12 @@ static void bnx2x_init_pxp(struct bnx2x *bp)
(0x80 | ((_type) & 0xf << 3) | (CDU_CRC8(_cid, _region, _type) & 0x7))
#define CDU_RSRVD_INVALIDATE_CONTEXT_VALUE(_val) ((_val) & ~0x80)
-/*****************************************************************************
- * Description:
- * Calculates crc 8 on a word value: polynomial 0-1-2-8
- * Code was translated from Verilog.
- ****************************************************************************/
-static u8 calc_crc8(u32 data, u8 crc)
-{
- u8 D[32];
- u8 NewCRC[8];
- u8 C[8];
- u8 crc_res;
- u8 i;
-
- /* split the data into 31 bits */
- for (i = 0; i < 32; i++) {
- D[i] = data & 1;
- data = data >> 1;
- }
-
- /* split the crc into 8 bits */
- for (i = 0; i < 8; i++) {
- C[i] = crc & 1;
- crc = crc >> 1;
- }
-
- NewCRC[0] = D[31] ^ D[30] ^ D[28] ^ D[23] ^ D[21] ^ D[19] ^ D[18] ^
- D[16] ^ D[14] ^ D[12] ^ D[8] ^ D[7] ^ D[6] ^ D[0] ^ C[4] ^
- C[6] ^ C[7];
- NewCRC[1] = D[30] ^ D[29] ^ D[28] ^ D[24] ^ D[23] ^ D[22] ^ D[21] ^
- D[20] ^ D[18] ^ D[17] ^ D[16] ^ D[15] ^ D[14] ^ D[13] ^
- D[12] ^ D[9] ^ D[6] ^ D[1] ^ D[0] ^ C[0] ^ C[4] ^ C[5] ^ C[6];
- NewCRC[2] = D[29] ^ D[28] ^ D[25] ^ D[24] ^ D[22] ^ D[17] ^ D[15] ^
- D[13] ^ D[12] ^ D[10] ^ D[8] ^ D[6] ^ D[2] ^ D[1] ^ D[0] ^
- C[0] ^ C[1] ^ C[4] ^ C[5];
- NewCRC[3] = D[30] ^ D[29] ^ D[26] ^ D[25] ^ D[23] ^ D[18] ^ D[16] ^
- D[14] ^ D[13] ^ D[11] ^ D[9] ^ D[7] ^ D[3] ^ D[2] ^ D[1] ^
- C[1] ^ C[2] ^ C[5] ^ C[6];
- NewCRC[4] = D[31] ^ D[30] ^ D[27] ^ D[26] ^ D[24] ^ D[19] ^ D[17] ^
- D[15] ^ D[14] ^ D[12] ^ D[10] ^ D[8] ^ D[4] ^ D[3] ^ D[2] ^
- C[0] ^ C[2] ^ C[3] ^ C[6] ^ C[7];
- NewCRC[5] = D[31] ^ D[28] ^ D[27] ^ D[25] ^ D[20] ^ D[18] ^ D[16] ^
- D[15] ^ D[13] ^ D[11] ^ D[9] ^ D[5] ^ D[4] ^ D[3] ^ C[1] ^
- C[3] ^ C[4] ^ C[7];
- NewCRC[6] = D[29] ^ D[28] ^ D[26] ^ D[21] ^ D[19] ^ D[17] ^ D[16] ^
- D[14] ^ D[12] ^ D[10] ^ D[6] ^ D[5] ^ D[4] ^ C[2] ^ C[4] ^
- C[5];
- NewCRC[7] = D[30] ^ D[29] ^ D[27] ^ D[22] ^ D[20] ^ D[18] ^ D[17] ^
- D[15] ^ D[13] ^ D[11] ^ D[7] ^ D[6] ^ D[5] ^ C[3] ^ C[5] ^
- C[6];
-
- crc_res = 0;
- for (i = 0; i < 8; i++)
- crc_res |= (NewCRC[i] << i);
-
- return crc_res;
-}
/* registers addresses are not in order
so these arrays help simplify the code */
-static const int cm_start[E1H_FUNC_MAX][9] = {
- {MISC_FUNC0_START, TCM_FUNC0_START, UCM_FUNC0_START, CCM_FUNC0_START,
- XCM_FUNC0_START, TSEM_FUNC0_START, USEM_FUNC0_START, CSEM_FUNC0_START,
- XSEM_FUNC0_START},
- {MISC_FUNC1_START, TCM_FUNC1_START, UCM_FUNC1_START, CCM_FUNC1_START,
- XCM_FUNC1_START, TSEM_FUNC1_START, USEM_FUNC1_START, CSEM_FUNC1_START,
- XSEM_FUNC1_START},
- {MISC_FUNC2_START, TCM_FUNC2_START, UCM_FUNC2_START, CCM_FUNC2_START,
- XCM_FUNC2_START, TSEM_FUNC2_START, USEM_FUNC2_START, CSEM_FUNC2_START,
- XSEM_FUNC2_START},
- {MISC_FUNC3_START, TCM_FUNC3_START, UCM_FUNC3_START, CCM_FUNC3_START,
- XCM_FUNC3_START, TSEM_FUNC3_START, USEM_FUNC3_START, CSEM_FUNC3_START,
- XSEM_FUNC3_START},
- {MISC_FUNC4_START, TCM_FUNC4_START, UCM_FUNC4_START, CCM_FUNC4_START,
- XCM_FUNC4_START, TSEM_FUNC4_START, USEM_FUNC4_START, CSEM_FUNC4_START,
- XSEM_FUNC4_START},
- {MISC_FUNC5_START, TCM_FUNC5_START, UCM_FUNC5_START, CCM_FUNC5_START,
- XCM_FUNC5_START, TSEM_FUNC5_START, USEM_FUNC5_START, CSEM_FUNC5_START,
- XSEM_FUNC5_START},
- {MISC_FUNC6_START, TCM_FUNC6_START, UCM_FUNC6_START, CCM_FUNC6_START,
- XCM_FUNC6_START, TSEM_FUNC6_START, USEM_FUNC6_START, CSEM_FUNC6_START,
- XSEM_FUNC6_START},
- {MISC_FUNC7_START, TCM_FUNC7_START, UCM_FUNC7_START, CCM_FUNC7_START,
- XCM_FUNC7_START, TSEM_FUNC7_START, USEM_FUNC7_START, CSEM_FUNC7_START,
- XSEM_FUNC7_START}
-};
-
-static const int cm_end[E1H_FUNC_MAX][9] = {
- {MISC_FUNC0_END, TCM_FUNC0_END, UCM_FUNC0_END, CCM_FUNC0_END,
- XCM_FUNC0_END, TSEM_FUNC0_END, USEM_FUNC0_END, CSEM_FUNC0_END,
- XSEM_FUNC0_END},
- {MISC_FUNC1_END, TCM_FUNC1_END, UCM_FUNC1_END, CCM_FUNC1_END,
- XCM_FUNC1_END, TSEM_FUNC1_END, USEM_FUNC1_END, CSEM_FUNC1_END,
- XSEM_FUNC1_END},
- {MISC_FUNC2_END, TCM_FUNC2_END, UCM_FUNC2_END, CCM_FUNC2_END,
- XCM_FUNC2_END, TSEM_FUNC2_END, USEM_FUNC2_END, CSEM_FUNC2_END,
- XSEM_FUNC2_END},
- {MISC_FUNC3_END, TCM_FUNC3_END, UCM_FUNC3_END, CCM_FUNC3_END,
- XCM_FUNC3_END, TSEM_FUNC3_END, USEM_FUNC3_END, CSEM_FUNC3_END,
- XSEM_FUNC3_END},
- {MISC_FUNC4_END, TCM_FUNC4_END, UCM_FUNC4_END, CCM_FUNC4_END,
- XCM_FUNC4_END, TSEM_FUNC4_END, USEM_FUNC4_END, CSEM_FUNC4_END,
- XSEM_FUNC4_END},
- {MISC_FUNC5_END, TCM_FUNC5_END, UCM_FUNC5_END, CCM_FUNC5_END,
- XCM_FUNC5_END, TSEM_FUNC5_END, USEM_FUNC5_END, CSEM_FUNC5_END,
- XSEM_FUNC5_END},
- {MISC_FUNC6_END, TCM_FUNC6_END, UCM_FUNC6_END, CCM_FUNC6_END,
- XCM_FUNC6_END, TSEM_FUNC6_END, USEM_FUNC6_END, CSEM_FUNC6_END,
- XSEM_FUNC6_END},
- {MISC_FUNC7_END, TCM_FUNC7_END, UCM_FUNC7_END, CCM_FUNC7_END,
- XCM_FUNC7_END, TSEM_FUNC7_END, USEM_FUNC7_END, CSEM_FUNC7_END,
- XSEM_FUNC7_END},
-};
-
-static const int hc_limits[E1H_FUNC_MAX][2] = {
- {HC_FUNC0_START, HC_FUNC0_END},
- {HC_FUNC1_START, HC_FUNC1_END},
- {HC_FUNC2_START, HC_FUNC2_END},
- {HC_FUNC3_START, HC_FUNC3_END},
- {HC_FUNC4_START, HC_FUNC4_END},
- {HC_FUNC5_START, HC_FUNC5_END},
- {HC_FUNC6_START, HC_FUNC6_END},
- {HC_FUNC7_START, HC_FUNC7_END}
+static const int cm_blocks[9] = {
+ MISC_BLOCK, TCM_BLOCK, UCM_BLOCK, CCM_BLOCK, XCM_BLOCK,
+ TSEM_BLOCK, USEM_BLOCK, CSEM_BLOCK, XSEM_BLOCK
};
#endif /* BNX2X_INIT_H */