diff options
| author | Shyam Sundar S K <Shyam-sundar.S-k@amd.com> | 2021-10-27 15:27:27 +0530 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2021-11-17 09:48:40 +0100 |
| commit | 077410c7907cb633502c97a3f4e7b897087d0c32 (patch) | |
| tree | cdddc9f0cfbaf896f9f393e340bd03e26346208e /drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c | |
| parent | 63a3b1af04747b7a3e16e46f72f9f8327df0f227 (diff) | |
net: amd-xgbe: Toggle PLL settings during rate change
[ Upstream commit daf182d360e509a494db18666799f4e85d83dda0 ]
For each rate change command submission, the FW has to do a phy
power off sequence internally. For this to happen correctly, the
PLL re-initialization control setting has to be turned off before
sending mailbox commands and re-enabled once the command submission
is complete.
Without the PLL control setting, the link up takes longer time in a
fixed phy configuration.
Fixes: 47f164deab22 ("amd-xgbe: Add PCI device support")
Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Diffstat (limited to 'drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c')
| -rw-r--r-- | drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c | 20 |
1 files changed, 19 insertions, 1 deletions
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c index d6f6afb67bcc..0b325ae875b5 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c @@ -1972,12 +1972,26 @@ static void xgbe_phy_rx_reset(struct xgbe_prv_data *pdata) } } +static void xgbe_phy_pll_ctrl(struct xgbe_prv_data *pdata, bool enable) +{ + XMDIO_WRITE_BITS(pdata, MDIO_MMD_PMAPMD, MDIO_VEND2_PMA_MISC_CTRL0, + XGBE_PMA_PLL_CTRL_MASK, + enable ? XGBE_PMA_PLL_CTRL_ENABLE + : XGBE_PMA_PLL_CTRL_DISABLE); + + /* Wait for command to complete */ + usleep_range(100, 200); +} + static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata, unsigned int cmd, unsigned int sub_cmd) { unsigned int s0 = 0; unsigned int wait; + /* Disable PLL re-initialization during FW command processing */ + xgbe_phy_pll_ctrl(pdata, false); + /* Log if a previous command did not complete */ if (XP_IOREAD_BITS(pdata, XP_DRIVER_INT_RO, STATUS)) { netif_dbg(pdata, link, pdata->netdev, @@ -1998,7 +2012,7 @@ static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata, wait = XGBE_RATECHANGE_COUNT; while (wait--) { if (!XP_IOREAD_BITS(pdata, XP_DRIVER_INT_RO, STATUS)) - return; + goto reenable_pll; usleep_range(1000, 2000); } @@ -2008,6 +2022,10 @@ static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata, /* Reset on error */ xgbe_phy_rx_reset(pdata); + +reenable_pll: + /* Enable PLL re-initialization */ + xgbe_phy_pll_ctrl(pdata, true); } static void xgbe_phy_rrc(struct xgbe_prv_data *pdata) |