diff options
| author | Yuval Mintz <Yuval.Mintz@qlogic.com> | 2015-04-22 12:47:32 +0300 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2015-04-22 14:23:31 -0400 |
| commit | 909d9faae2a447110aa061070145297fffe129cb (patch) | |
| tree | 57929e27c0d5634ca09405c24b8357aa264b9723 /drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | |
| parent | a2c3935aaa8fe99dbddb13ff244ecec7c324ec8b (diff) | |
bnx2x: Prevent inner-reload while VFs exist
On some feature changes, driver employes an inner-reload flow where it
resets the function and re-configures it with the new required set of
parameters.
Such a flow proves fatal to any VF since those were not intended to be used
while HW is being reset underneath, causing them [at best] to lose all
connectivity.
This changes driver behavior to fail all configuration changes [e.g., mtu
change] requested of the driver in case VFs are active.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c')
| -rw-r--r-- | drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 43 |
1 files changed, 34 insertions, 9 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index 2f63467bce46..6f7dc81581ff 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -4809,6 +4809,23 @@ netdev_features_t bnx2x_fix_features(struct net_device *dev, { struct bnx2x *bp = netdev_priv(dev); + if (pci_num_vf(bp->pdev)) { + netdev_features_t changed = dev->features ^ features; + + /* Revert the requested changes in features if they + * would require internal reload of PF in bnx2x_set_features(). + */ + if (!(features & NETIF_F_RXCSUM) && !bp->disable_tpa) { + features &= ~NETIF_F_RXCSUM; + features |= dev->features & NETIF_F_RXCSUM; + } + + if (changed & NETIF_F_LOOPBACK) { + features &= ~NETIF_F_LOOPBACK; + features |= dev->features & NETIF_F_LOOPBACK; + } + } + /* TPA requires Rx CSUM offloading */ if (!(features & NETIF_F_RXCSUM)) { features &= ~NETIF_F_LRO; @@ -4839,15 +4856,18 @@ int bnx2x_set_features(struct net_device *dev, netdev_features_t features) else flags &= ~GRO_ENABLE_FLAG; - if (features & NETIF_F_LOOPBACK) { - if (bp->link_params.loopback_mode != LOOPBACK_BMAC) { - bp->link_params.loopback_mode = LOOPBACK_BMAC; - bnx2x_reload = true; - } - } else { - if (bp->link_params.loopback_mode != LOOPBACK_NONE) { - bp->link_params.loopback_mode = LOOPBACK_NONE; - bnx2x_reload = true; + /* VFs or non SRIOV PFs should be able to change loopback feature */ + if (!pci_num_vf(bp->pdev)) { + if (features & NETIF_F_LOOPBACK) { + if (bp->link_params.loopback_mode != LOOPBACK_BMAC) { + bp->link_params.loopback_mode = LOOPBACK_BMAC; + bnx2x_reload = true; + } + } else { + if (bp->link_params.loopback_mode != LOOPBACK_NONE) { + bp->link_params.loopback_mode = LOOPBACK_NONE; + bnx2x_reload = true; + } } } @@ -4931,6 +4951,11 @@ int bnx2x_resume(struct pci_dev *pdev) } bp = netdev_priv(dev); + if (pci_num_vf(bp->pdev)) { + DP(BNX2X_MSG_IOV, "VFs are enabled, can not change MTU\n"); + return -EPERM; + } + if (bp->recovery_state != BNX2X_RECOVERY_DONE) { BNX2X_ERR("Handling parity error recovery. Try again later\n"); return -EAGAIN; |