net: hns3: Add input key and action config support for flow director

Each flow director rule consists of input key and action. The input key
is the condition for matching, includes tuples of L2/L3/L4 header.
Action is the behaviour when a packet matches with the input key, such
as drop the packet, or forward to a specified queue.

The input key is stored in the tcam blocks, Each bit of input key can
be masked.

Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 82 insertions, 0 deletions

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
index 1e7ad5a637a9..7f5a2422ed68 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
@@ -79,6 +79,19 @@
 #define HCLGE_VF_NUM_PER_CMD           64
 #define HCLGE_VF_NUM_PER_BYTE          8
 
+enum HLCGE_PORT_TYPE {
+	HOST_PORT,
+	NETWORK_PORT
+};
+
+#define HCLGE_PF_ID_S			0
+#define HCLGE_PF_ID_M			GENMASK(2, 0)
+#define HCLGE_VF_ID_S			3
+#define HCLGE_VF_ID_M			GENMASK(10, 3)
+#define HCLGE_PORT_TYPE_B		11
+#define HCLGE_NETWORK_PORT_ID_S		0
+#define HCLGE_NETWORK_PORT_ID_M		GENMASK(3, 0)
+
 /* Reset related Registers */
 #define HCLGE_MISC_RESET_STS_REG	0x20700
 #define HCLGE_MISC_VECTOR_INT_STS	0x20800
@@ -485,6 +498,11 @@ enum HCLGE_FD_PACKET_TYPE {
 	ROCE_PACKET,
 };
 
+enum HCLGE_FD_ACTION {
+	HCLGE_FD_ACTION_ACCEPT_PACKET,
+	HCLGE_FD_ACTION_DROP_PACKET,
+};
+
 struct hclge_fd_key_cfg {
 	u8 key_sel;
 	u8 inner_sipv6_word_en;
@@ -505,6 +523,70 @@ struct hclge_fd_cfg {
 	struct hclge_fd_key_cfg key_cfg[2];
 };
 
+struct hclge_fd_rule_tuples {
+	u8 src_mac[6];
+	u8 dst_mac[6];
+	u32 src_ip[4];
+	u32 dst_ip[4];
+	u16 src_port;
+	u16 dst_port;
+	u16 vlan_tag1;
+	u16 ether_proto;
+	u8 ip_tos;
+	u8 ip_proto;
+};
+
+struct hclge_fd_rule {
+	struct hlist_node rule_node;
+	struct hclge_fd_rule_tuples tuples;
+	struct hclge_fd_rule_tuples tuples_mask;
+	u32 unused_tuple;
+	u32 flow_type;
+	u8 action;
+	u16 vf_id;
+	u16 queue_id;
+	u16 location;
+};
+
+struct hclge_fd_ad_data {
+	u16 ad_id;
+	u8 drop_packet;
+	u8 forward_to_direct_queue;
+	u16 queue_id;
+	u8 use_counter;
+	u8 counter_id;
+	u8 use_next_stage;
+	u8 write_rule_id_to_bd;
+	u8 next_input_key;
+	u16 rule_id;
+};
+
+/* For each bit of TCAM entry, it uses a pair of 'x' and
+ * 'y' to indicate which value to match, like below:
+ * ----------------------------------
+ * | bit x | bit y |  search value  |
+ * ----------------------------------
+ * |   0   |   0   |   always hit   |
+ * ----------------------------------
+ * |   1   |   0   |   match '0'    |
+ * ----------------------------------
+ * |   0   |   1   |   match '1'    |
+ * ----------------------------------
+ * |   1   |   1   |   invalid      |
+ * ----------------------------------
+ * Then for input key(k) and mask(v), we can calculate the value by
+ * the formulae:
+ *	x = (~k) & v
+ *	y = (k ^ ~v) & k
+ */
+#define calc_x(x, k, v) ((x) = (~(k) & (v)))
+#define calc_y(y, k, v) \
+	do { \
+		const typeof(k) _k_ = (k); \
+		const typeof(v) _v_ = (v); \
+		(y) = (_k_ ^ ~_v_) & (_k_); \
+	} while (0)
+
 #define HCLGE_VPORT_NUM 256
 struct hclge_dev {
 	struct pci_dev *pdev;