netxen: remove netxen_nic_niu.c

Consolidate all MAC/PHY access functions into netxen_nic_hw.c

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 0 insertions, 275 deletions

diff --git a/drivers/net/netxen/netxen_nic_niu.c b/drivers/net/netxen/netxen_nic_niu.c
deleted file mode 100644
index 1392e8994f2c..000000000000
--- a/drivers/net/netxen/netxen_nic_niu.c
+++ /dev/null
@@ -1,275 +0,0 @@
-/*
- * Copyright (C) 2003 - 2009 NetXen, Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston,
- * MA  02111-1307, USA.
- *
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.
- *
- * Contact Information:
- *    info@netxen.com
- * NetXen Inc,
- * 18922 Forge Drive
- * Cupertino, CA 95014-0701
- *
- */
-
-#include "netxen_nic.h"
-
-/*
- * netxen_niu_gbe_phy_read - read a register from the GbE PHY via
- * mii management interface.
- *
- * Note: The MII management interface goes through port 0.
- *	Individual phys are addressed as follows:
- * @param phy  [15:8]  phy id
- * @param reg  [7:0]   register number
- *
- * @returns  0 on success
- *	  -1 on error
- *
- */
-int netxen_niu_gbe_phy_read(struct netxen_adapter *adapter, long reg,
-				__u32 * readval)
-{
-	long timeout = 0;
-	long result = 0;
-	long restore = 0;
-	long phy = adapter->physical_port;
-	__u32 address;
-	__u32 command;
-	__u32 status;
-	__u32 mac_cfg0;
-
-	if (netxen_phy_lock(adapter) != 0)
-		return -1;
-
-	/*
-	 * MII mgmt all goes through port 0 MAC interface,
-	 * so it cannot be in reset
-	 */
-
-	mac_cfg0 = NXRD32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0));
-	if (netxen_gb_get_soft_reset(mac_cfg0)) {
-		__u32 temp;
-		temp = 0;
-		netxen_gb_tx_reset_pb(temp);
-		netxen_gb_rx_reset_pb(temp);
-		netxen_gb_tx_reset_mac(temp);
-		netxen_gb_rx_reset_mac(temp);
-		if (NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0), temp))
-			return -EIO;
-		restore = 1;
-	}
-
-	address = 0;
-	netxen_gb_mii_mgmt_reg_addr(address, reg);
-	netxen_gb_mii_mgmt_phy_addr(address, phy);
-	if (NXWR32(adapter, NETXEN_NIU_GB_MII_MGMT_ADDR(0), address))
-		return -EIO;
-	command = 0;		/* turn off any prior activity */
-	if (NXWR32(adapter, NETXEN_NIU_GB_MII_MGMT_COMMAND(0), command))
-		return -EIO;
-	/* send read command */
-	netxen_gb_mii_mgmt_set_read_cycle(command);
-	if (NXWR32(adapter, NETXEN_NIU_GB_MII_MGMT_COMMAND(0), command))
-		return -EIO;
-
-	status = 0;
-	do {
-		status = NXRD32(adapter, NETXEN_NIU_GB_MII_MGMT_INDICATE(0));
-		timeout++;
-	} while ((netxen_get_gb_mii_mgmt_busy(status)
-		  || netxen_get_gb_mii_mgmt_notvalid(status))
-		 && (timeout++ < NETXEN_NIU_PHY_WAITMAX));
-
-	if (timeout < NETXEN_NIU_PHY_WAITMAX) {
-		*readval = NXRD32(adapter, NETXEN_NIU_GB_MII_MGMT_STATUS(0));
-		result = 0;
-	} else
-		result = -1;
-
-	if (restore)
-		if (NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0), mac_cfg0))
-			return -EIO;
-	netxen_phy_unlock(adapter);
-	return result;
-}
-
-/*
- * netxen_niu_gbe_phy_write - write a register to the GbE PHY via
- * mii management interface.
- *
- * Note: The MII management interface goes through port 0.
- *	Individual phys are addressed as follows:
- * @param phy      [15:8]  phy id
- * @param reg      [7:0]   register number
- *
- * @returns  0 on success
- *	  -1 on error
- *
- */
-int netxen_niu_gbe_phy_write(struct netxen_adapter *adapter, long reg,
-				__u32 val)
-{
-	long timeout = 0;
-	long result = 0;
-	long restore = 0;
-	long phy = adapter->physical_port;
-	__u32 address;
-	__u32 command;
-	__u32 status;
-	__u32 mac_cfg0;
-
-	/*
-	 * MII mgmt all goes through port 0 MAC interface, so it
-	 * cannot be in reset
-	 */
-
-	mac_cfg0 = NXRD32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0));
-	if (netxen_gb_get_soft_reset(mac_cfg0)) {
-		__u32 temp;
-		temp = 0;
-		netxen_gb_tx_reset_pb(temp);
-		netxen_gb_rx_reset_pb(temp);
-		netxen_gb_tx_reset_mac(temp);
-		netxen_gb_rx_reset_mac(temp);
-
-		if (NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0), temp))
-			return -EIO;
-		restore = 1;
-	}
-
-	command = 0;		/* turn off any prior activity */
-	if (NXWR32(adapter, NETXEN_NIU_GB_MII_MGMT_COMMAND(0), command))
-		return -EIO;
-
-	address = 0;
-	netxen_gb_mii_mgmt_reg_addr(address, reg);
-	netxen_gb_mii_mgmt_phy_addr(address, phy);
-	if (NXWR32(adapter, NETXEN_NIU_GB_MII_MGMT_ADDR(0), address))
-		return -EIO;
-
-	if (NXWR32(adapter, NETXEN_NIU_GB_MII_MGMT_CTRL(0), val))
-		return -EIO;
-
-	status = 0;
-	do {
-		status = NXRD32(adapter, NETXEN_NIU_GB_MII_MGMT_INDICATE(0));
-		timeout++;
-	} while ((netxen_get_gb_mii_mgmt_busy(status))
-		 && (timeout++ < NETXEN_NIU_PHY_WAITMAX));
-
-	if (timeout < NETXEN_NIU_PHY_WAITMAX)
-		result = 0;
-	else
-		result = -EIO;
-
-	/* restore the state of port 0 MAC in case we tampered with it */
-	if (restore)
-		if (NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0), mac_cfg0))
-			return -EIO;
-
-	return result;
-}
-
-int netxen_niu_xg_init_port(struct netxen_adapter *adapter, int port)
-{
-	if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
-		NXWR32(adapter, NETXEN_NIU_XGE_CONFIG_1+(0x10000*port), 0x1447);
-		NXWR32(adapter, NETXEN_NIU_XGE_CONFIG_0+(0x10000*port), 0x5);
-	}
-
-	return 0;
-}
-
-/* Disable an XG interface */
-int netxen_niu_disable_xg_port(struct netxen_adapter *adapter)
-{
-	__u32 mac_cfg;
-	u32 port = adapter->physical_port;
-
-	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
-		return 0;
-
-	if (port > NETXEN_NIU_MAX_XG_PORTS)
-		return -EINVAL;
-
-	mac_cfg = 0;
-	if (NXWR32(adapter,
-			NETXEN_NIU_XGE_CONFIG_0 + (0x10000 * port), mac_cfg))
-		return -EIO;
-	return 0;
-}
-
-int netxen_niu_xg_set_promiscuous_mode(struct netxen_adapter *adapter,
-		u32 mode)
-{
-	__u32 reg;
-	u32 port = adapter->physical_port;
-
-	if (port > NETXEN_NIU_MAX_XG_PORTS)
-		return -EINVAL;
-
-	reg = NXRD32(adapter, NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port));
-	if (mode == NETXEN_NIU_PROMISC_MODE)
-		reg = (reg | 0x2000UL);
-	else
-		reg = (reg & ~0x2000UL);
-
-	if (mode == NETXEN_NIU_ALLMULTI_MODE)
-		reg = (reg | 0x1000UL);
-	else
-		reg = (reg & ~0x1000UL);
-
-	NXWR32(adapter, NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port), reg);
-
-	return 0;
-}
-
-int netxen_p2_nic_set_mac_addr(struct netxen_adapter *adapter, u8 *addr)
-{
-	u32 mac_hi, mac_lo;
-	u32 reg_hi, reg_lo;
-
-	u8 phy = adapter->physical_port;
-	u8 phy_count = (adapter->ahw.port_type == NETXEN_NIC_XGBE) ?
-		NETXEN_NIU_MAX_XG_PORTS : NETXEN_NIU_MAX_GBE_PORTS;
-
-	if (phy >= phy_count)
-		return -EINVAL;
-
-	mac_lo = ((u32)addr[0] << 16) | ((u32)addr[1] << 24);
-	mac_hi = addr[2] | ((u32)addr[3] << 8) |
-		((u32)addr[4] << 16) | ((u32)addr[5] << 24);
-
-	if (adapter->ahw.port_type == NETXEN_NIC_XGBE) {
-		reg_lo = NETXEN_NIU_XGE_STATION_ADDR_0_1 + (0x10000 * phy);
-		reg_hi = NETXEN_NIU_XGE_STATION_ADDR_0_HI + (0x10000 * phy);
-	} else {
-		reg_lo = NETXEN_NIU_GB_STATION_ADDR_1(phy);
-		reg_hi = NETXEN_NIU_GB_STATION_ADDR_0(phy);
-	}
-
-	/* write twice to flush */
-	if (NXWR32(adapter, reg_lo, mac_lo) || NXWR32(adapter, reg_hi, mac_hi))
-		return -EIO;
-	if (NXWR32(adapter, reg_lo, mac_lo) || NXWR32(adapter, reg_hi, mac_hi))
-		return -EIO;
-
-	return 0;
-}