Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Another merge window, another set of networking changes.  I've heard
  rumblings that the lightweight tunnels infrastructure has been voted
  networking change of the year.  But what do I know?

   1) Add conntrack support to openvswitch, from Joe Stringer.

   2) Initial support for VRF (Virtual Routing and Forwarding), which
      allows the segmentation of routing paths without using multiple
      devices.  There are some semantic kinks to work out still, but
      this is a reasonably strong foundation.  From David Ahern.

   3) Remove spinlock fro act_bpf fast path, from Alexei Starovoitov.

   4) Ignore route nexthops with a link down state in ipv6, just like
      ipv4.  From Andy Gospodarek.

   5) Remove spinlock from fast path of act_gact and act_mirred, from
      Eric Dumazet.

   6) Document the DSA layer, from Florian Fainelli.

   7) Add netconsole support to bcmgenet, systemport, and DSA.  Also
      from Florian Fainelli.

   8) Add Mellanox Switch Driver and core infrastructure, from Jiri
      Pirko.

   9) Add support for "light weight tunnels", which allow for
      encapsulation and decapsulation without bearing the overhead of a
      full blown netdevice.  From Thomas Graf, Jiri Benc, and a cast of
      others.

  10) Add Identifier Locator Addressing support for ipv6, from Tom
      Herbert.

  11) Support fragmented SKBs in iwlwifi, from Johannes Berg.

  12) Allow perf PMUs to be accessed from eBPF programs, from Kaixu Xia.

  13) Add BQL support to 3c59x driver, from Loganaden Velvindron.

  14) Stop using a zero TX queue length to mean that a device shouldn't
      have a qdisc attached, use an explicit flag instead.  From Phil
      Sutter.

  15) Use generic geneve netdevice infrastructure in openvswitch, from
      Pravin B Shelar.

  16) Add infrastructure to avoid re-forwarding a packet in software
      that was already forwarded by a hardware switch.  From Scott
      Feldman.

  17) Allow AF_PACKET fanout function to be implemented in a bpf
      program, from Willem de Bruijn"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1458 commits)
  netfilter: nf_conntrack: make nf_ct_zone_dflt built-in
  netfilter: nf_dup{4, 6}: fix build error when nf_conntrack disabled
  net: fec: clear receive interrupts before processing a packet
  ipv6: fix exthdrs offload registration in out_rt path
  xen-netback: add support for multicast control
  bgmac: Update fixed_phy_register()
  sock, diag: fix panic in sock_diag_put_filterinfo
  flow_dissector: Use 'const' where possible.
  flow_dissector: Fix function argument ordering dependency
  ixgbe: Resolve "initialized field overwritten" warnings
  ixgbe: Remove bimodal SR-IOV disabling
  ixgbe: Add support for reporting 2.5G link speed
  ixgbe: fix bounds checking in ixgbe_setup_tc for 82598
  ixgbe: support for ethtool set_rxfh
  ixgbe: Avoid needless PHY access on copper phys
  ixgbe: cleanup to use cached mask value
  ixgbe: Remove second instance of lan_id variable
  ixgbe: use kzalloc for allocating one thing
  flow: Move __get_hash_from_flowi{4,6} into flow_dissector.c
  ixgbe: Remove unused PCI bus types
  ...

1 files changed, 15 insertions, 10 deletions

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
index fc595b92ac56..c5f8bc4b5595 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
@@ -455,7 +455,7 @@
 #define AR_PHY_MODE              (AR_SM_BASE + 0x8)
 #define AR_PHY_ACTIVE            (AR_SM_BASE + 0xc)
 #define AR_PHY_SPUR_MASK_A       (AR_SM_BASE + (AR_SREV_9561(ah) ? 0x18 : 0x20))
-#define AR_PHY_SPUR_MASK_B       (AR_SM_BASE + 0x24)
+#define AR_PHY_SPUR_MASK_B       (AR_SM_BASE + (AR_SREV_9561(ah) ? 0x1c : 0x24))
 #define AR_PHY_SPECTRAL_SCAN     (AR_SM_BASE + 0x28)
 #define AR_PHY_RADAR_BW_FILTER   (AR_SM_BASE + 0x2c)
 #define AR_PHY_SEARCH_START_DELAY (AR_SM_BASE + 0x30)
@@ -495,7 +495,7 @@
 #define AR_PHY_SPUR_MASK_A_CF_PUNC_MASK_A                       0x3FF
 #define AR_PHY_SPUR_MASK_A_CF_PUNC_MASK_A_S                     0
 
-#define AR_PHY_TEST              (AR_SM_BASE + 0x160)
+#define AR_PHY_TEST              (AR_SM_BASE + (AR_SREV_9561(ah) ? 0x15c : 0x160))
 
 #define AR_PHY_TEST_BBB_OBS_SEL       0x780000
 #define AR_PHY_TEST_BBB_OBS_SEL_S     19
@@ -521,24 +521,29 @@
 #define AR_PHY_TEST_CTL_DEBUGPORT_SEL_S	  29
 
 
-#define AR_PHY_TSTDAC            (AR_SM_BASE + 0x168)
+#define AR_PHY_TSTDAC            (AR_SM_BASE + (AR_SREV_9561(ah) ? 0x164 : 0x168))
 
-#define AR_PHY_CHAN_STATUS       (AR_SM_BASE + 0x16c)
+#define AR_PHY_CHAN_STATUS       (AR_SM_BASE + (AR_SREV_9561(ah) ? 0x168 : 0x16c))
 
 #define AR_PHY_CHAN_INFO_MEMORY (AR_SM_BASE + (AR_SREV_9561(ah) ? 0x16c : 0x170))
 #define AR_PHY_CHAN_INFO_MEMORY_CHANINFOMEM_S2_READ	0x00000008
 #define AR_PHY_CHAN_INFO_MEMORY_CHANINFOMEM_S2_READ_S	3
 
-#define AR_PHY_CHNINFO_NOISEPWR  (AR_SM_BASE + 0x174)
-#define AR_PHY_CHNINFO_GAINDIFF  (AR_SM_BASE + 0x178)
-#define AR_PHY_CHNINFO_FINETIM   (AR_SM_BASE + 0x17c)
-#define AR_PHY_CHAN_INFO_GAIN_0  (AR_SM_BASE + 0x180)
-#define AR_PHY_SCRAMBLER_SEED    (AR_SM_BASE + 0x190)
-#define AR_PHY_CCK_TX_CTRL       (AR_SM_BASE + 0x194)
+#define AR_PHY_CHNINFO_NOISEPWR  (AR_SM_BASE + (AR_SREV_9561(ah) ? 0x170 : 0x174))
+#define AR_PHY_CHNINFO_GAINDIFF  (AR_SM_BASE + (AR_SREV_9561(ah) ? 0x174 : 0x178))
+#define AR_PHY_CHNINFO_FINETIM   (AR_SM_BASE + (AR_SREV_9561(ah) ? 0x178 : 0x17c))
+#define AR_PHY_CHAN_INFO_GAIN_0  (AR_SM_BASE + (AR_SREV_9561(ah) ? 0x17c : 0x180))
+#define AR_PHY_SCRAMBLER_SEED    (AR_SM_BASE + (AR_SREV_9561(ah) ? 0x184 : 0x190))
+#define AR_PHY_CCK_TX_CTRL       (AR_SM_BASE + (AR_SREV_9561(ah) ? 0x188 : 0x194))
 
 #define AR_PHY_HEAVYCLIP_CTL     (AR_SM_BASE + (AR_SREV_9561(ah) ? 0x198 : 0x1a4))
 #define AR_PHY_HEAVYCLIP_20      (AR_SM_BASE + 0x1a8)
 #define AR_PHY_HEAVYCLIP_40      (AR_SM_BASE + 0x1ac)
+#define AR_PHY_HEAVYCLIP_1	 (AR_SM_BASE + 0x19c)
+#define AR_PHY_HEAVYCLIP_2	 (AR_SM_BASE + 0x1a0)
+#define AR_PHY_HEAVYCLIP_3	 (AR_SM_BASE + 0x1a4)
+#define AR_PHY_HEAVYCLIP_4	 (AR_SM_BASE + 0x1a8)
+#define AR_PHY_HEAVYCLIP_5	 (AR_SM_BASE + 0x1ac)
 #define AR_PHY_ILLEGAL_TXRATE    (AR_SM_BASE + 0x1b0)
 
 #define AR_PHY_POWER_TX_RATE(_d) (AR_SM_BASE + 0x1c0 + ((_d) << 2))