ath5k: extract LED code into a separate file

Move LED code out of base.c for clarity.

Changes-licensed-under: 3-Clause-BSD
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 0 insertions, 140 deletions

diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index f2e5c3936f06..cad3ccf61b00 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -370,11 +370,6 @@ static irqreturn_t ath5k_intr(int irq, void *dev_id);
 static void 	ath5k_tasklet_reset(unsigned long data);
 
 static void 	ath5k_calibrate(unsigned long data);
-/* LED functions */
-static int	ath5k_init_leds(struct ath5k_softc *sc);
-static void	ath5k_led_enable(struct ath5k_softc *sc);
-static void	ath5k_led_off(struct ath5k_softc *sc);
-static void	ath5k_unregister_leds(struct ath5k_softc *sc);
 
 /*
  * Module init/exit functions
@@ -2530,141 +2525,6 @@ ath5k_calibrate(unsigned long data)
 }
 
 
-
-/***************\
-* LED functions *
-\***************/
-
-static void
-ath5k_led_enable(struct ath5k_softc *sc)
-{
-	if (test_bit(ATH_STAT_LEDSOFT, sc->status)) {
-		ath5k_hw_set_gpio_output(sc->ah, sc->led_pin);
-		ath5k_led_off(sc);
-	}
-}
-
-static void
-ath5k_led_on(struct ath5k_softc *sc)
-{
-	if (!test_bit(ATH_STAT_LEDSOFT, sc->status))
-		return;
-	ath5k_hw_set_gpio(sc->ah, sc->led_pin, sc->led_on);
-}
-
-static void
-ath5k_led_off(struct ath5k_softc *sc)
-{
-	if (!test_bit(ATH_STAT_LEDSOFT, sc->status))
-		return;
-	ath5k_hw_set_gpio(sc->ah, sc->led_pin, !sc->led_on);
-}
-
-static void
-ath5k_led_brightness_set(struct led_classdev *led_dev,
-	enum led_brightness brightness)
-{
-	struct ath5k_led *led = container_of(led_dev, struct ath5k_led,
-		led_dev);
-
-	if (brightness == LED_OFF)
-		ath5k_led_off(led->sc);
-	else
-		ath5k_led_on(led->sc);
-}
-
-static int
-ath5k_register_led(struct ath5k_softc *sc, struct ath5k_led *led,
-		   const char *name, char *trigger)
-{
-	int err;
-
-	led->sc = sc;
-	strncpy(led->name, name, sizeof(led->name));
-	led->led_dev.name = led->name;
-	led->led_dev.default_trigger = trigger;
-	led->led_dev.brightness_set = ath5k_led_brightness_set;
-
-	err = led_classdev_register(&sc->pdev->dev, &led->led_dev);
-	if (err) {
-		ATH5K_WARN(sc, "could not register LED %s\n", name);
-		led->sc = NULL;
-	}
-	return err;
-}
-
-static void
-ath5k_unregister_led(struct ath5k_led *led)
-{
-	if (!led->sc)
-		return;
-	led_classdev_unregister(&led->led_dev);
-	ath5k_led_off(led->sc);
-	led->sc = NULL;
-}
-
-static void
-ath5k_unregister_leds(struct ath5k_softc *sc)
-{
-	ath5k_unregister_led(&sc->rx_led);
-	ath5k_unregister_led(&sc->tx_led);
-}
-
-
-static int
-ath5k_init_leds(struct ath5k_softc *sc)
-{
-	int ret = 0;
-	struct ieee80211_hw *hw = sc->hw;
-	struct pci_dev *pdev = sc->pdev;
-	char name[ATH5K_LED_MAX_NAME_LEN + 1];
-
-	/*
-	 * Auto-enable soft led processing for IBM cards and for
-	 * 5211 minipci cards.
-	 */
-	if (pdev->device == PCI_DEVICE_ID_ATHEROS_AR5212_IBM ||
-	    pdev->device == PCI_DEVICE_ID_ATHEROS_AR5211) {
-		__set_bit(ATH_STAT_LEDSOFT, sc->status);
-		sc->led_pin = 0;
-		sc->led_on = 0;  /* active low */
-	}
-	/* Enable softled on PIN1 on HP Compaq nc6xx, nc4000 & nx5000 laptops */
-	if (pdev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ) {
-		__set_bit(ATH_STAT_LEDSOFT, sc->status);
-		sc->led_pin = 1;
-		sc->led_on = 1;  /* active high */
-	}
-	/*
-	 * Pin 3 on Foxconn chips used in Acer Aspire One (0x105b:e008) and
-	 * in emachines notebooks with AMBIT subsystem.
-	 */
-	if (pdev->subsystem_vendor == PCI_VENDOR_ID_FOXCONN ||
-	    pdev->subsystem_vendor == PCI_VENDOR_ID_AMBIT) {
-		__set_bit(ATH_STAT_LEDSOFT, sc->status);
-		sc->led_pin = 3;
-		sc->led_on = 0;  /* active low */
-	}
-
-	if (!test_bit(ATH_STAT_LEDSOFT, sc->status))
-		goto out;
-
-	ath5k_led_enable(sc);
-
-	snprintf(name, sizeof(name), "ath5k-%s::rx", wiphy_name(hw->wiphy));
-	ret = ath5k_register_led(sc, &sc->rx_led, name,
-		ieee80211_get_rx_led_name(hw));
-	if (ret)
-		goto out;
-
-	snprintf(name, sizeof(name), "ath5k-%s::tx", wiphy_name(hw->wiphy));
-	ret = ath5k_register_led(sc, &sc->tx_led, name,
-		ieee80211_get_tx_led_name(hw));
-out:
-	return ret;
-}
-
-
 /********************\
 * Mac80211 functions *
 \********************/