diff options
| author | Ivo van Doorn <IvDoorn@gmail.com> | 2011-04-18 15:27:06 +0200 |
|---|---|---|
| committer | John W. Linville <linville@tuxdriver.com> | 2011-04-19 15:39:11 -0400 |
| commit | 7dab73b37f5e8885cb73efd25e73861f9b4f0246 (patch) | |
| tree | 3c09412e1ec0b02eaf193879aed12db0f9874f7c /drivers/net/wireless/rt2x00/rt2x00dev.c | |
| parent | 62fe778412b36791b7897cfa139342906fbbf07b (diff) | |
rt2x00: Split rt2x00dev->flags
The number of flags defined for the rt2x00dev->flags field,
has been growing over the years. Currently we are approaching
the maximum number of bits which are available in the field.
A secondary problem, is that one part of the field are initialized only
during boot, because the driver requirements are initialized or device
requirements are loaded from the EEPROM. In both cases, the flags are
fixed and will not change during device operation. The other flags are
the device state, and will change frequently. So far this resulted in the fact
that for some flags, the atomic bit accessors are used, while for the others
the non-atomic variants are used.
By splitting the flags up into a "flags" and "cap_flags" we can put all flags
which are fixed inside "cap_flags". This field can then be read non-atomically.
In the "flags" field we keep the device state, which is going to be read atomically.
This adds more room for more flags in the future, and sanitizes the field access methods.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Acked-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt2x00dev.c')
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00dev.c | 14 |
1 files changed, 7 insertions, 7 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 9bffe8438d1f..af25b0152cbc 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -200,7 +200,7 @@ void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev) * here as they will fetch the next beacon directly prior to * transmission. */ - if (test_bit(DRIVER_SUPPORT_PRE_TBTT_INTERRUPT, &rt2x00dev->flags)) + if (test_bit(CAPABILITY_PRE_TBTT_INTERRUPT, &rt2x00dev->cap_flags)) return; /* fetch next beacon */ @@ -271,7 +271,7 @@ void rt2x00lib_txdone(struct queue_entry *entry, /* * Remove L2 padding which was added during */ - if (test_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags)) + if (test_bit(REQUIRE_L2PAD, &rt2x00dev->cap_flags)) rt2x00queue_remove_l2pad(entry->skb, header_length); /* @@ -280,7 +280,7 @@ void rt2x00lib_txdone(struct queue_entry *entry, * mac80211 will expect the same data to be present it the * frame as it was passed to us. */ - if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) + if (test_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags)) rt2x00crypto_tx_insert_iv(entry->skb, header_length); /* @@ -377,7 +377,7 @@ void rt2x00lib_txdone(struct queue_entry *entry, * send the status report back. */ if (!(skbdesc_flags & SKBDESC_NOT_MAC80211)) { - if (test_bit(DRIVER_REQUIRE_TASKLET_CONTEXT, &rt2x00dev->flags)) + if (test_bit(REQUIRE_TASKLET_CONTEXT, &rt2x00dev->cap_flags)) ieee80211_tx_status(rt2x00dev->hw, entry->skb); else ieee80211_tx_status_ni(rt2x00dev->hw, entry->skb); @@ -806,15 +806,15 @@ static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev) /* * Take TX headroom required for alignment into account. */ - if (test_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags)) + if (test_bit(REQUIRE_L2PAD, &rt2x00dev->cap_flags)) rt2x00dev->hw->extra_tx_headroom += RT2X00_L2PAD_SIZE; - else if (test_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags)) + else if (test_bit(REQUIRE_DMA, &rt2x00dev->cap_flags)) rt2x00dev->hw->extra_tx_headroom += RT2X00_ALIGN_SIZE; /* * Allocate tx status FIFO for driver use. */ - if (test_bit(DRIVER_REQUIRE_TXSTATUS_FIFO, &rt2x00dev->flags)) { + if (test_bit(REQUIRE_TXSTATUS_FIFO, &rt2x00dev->cap_flags)) { /* * Allocate the txstatus fifo. In the worst case the tx * status fifo has to hold the tx status of all entries |